Search Results

Search found 31586 results on 1264 pages for 'custom result'.

Page 590/1264 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• keepalived questions (requirements, abilities, limitations)

  - by Poni

  1) What are keepalived's (physical/network) requirements? Does the two (or more) keepalived' nodes need to be connected to the same switch? (something related to broadcasting maybe). 2) Can keepalived nodes run on different networks, "internet" networks? 3) Is keepalived depend on the router? (as far as I understand, the virtual IP should point to the real router/switch that connects both nodes). 4) Is keepalived "service-independent"? - What is keepalived's involvement domain? IPs only? Or is it service/protocol oriented? - Does it deal ONLY with IP, or is it designed for HTTP for example? - In other words, can I use it for custom (network-based) app? 5) Have more than one failover server? If the answer for question #4 is "yes", i.e it depends on the service type, then is there any general alternative? Preferably easy to install/configure :)

  Read the article

• periodically overridding NTP for simulation purposes

  - by Gerard

  I have this situation: NTP is used to sync time on a set of Windows 7 and Server 2008 machines. Nothing out of the ordinary about this. periodically on this system, the time needs to be changed for testing/training purposes (it is a training simulation system that has a lot of time-dependent operations). My question: As NTP in general does not really like big time jumps or changes AFAIK, is there a standard way this could be set up to allow the clock to be changed at the root NTP server in the system and have it propagate through the system in a reasonable amount of time (a minute or two?) It is not acceptable to disable and/or restart all NTP client services to achieve this. Any ideas? It would be nice to do this without writing some kind of custom script to disable services and update clocks all over the place. Thanks in advance.

  Read the article

• Modifying %HOME% on Emacs 24.3 on Windows causes .emacs to not be found

  - by David

  In order for magit to read my git settings on Emacs 24.3.1 for Windows, I added the following configuration from a stack overflow post: (when (string-equal system-type "windows-nt") (setenv "HOME" (concat (getenv "HOMEDRIVE") (getenv "HOMEPATH"))) Interestingly, after this is added to my .emacs, Emacs thinks .emacs doesn't exist anymore. If I do M-x cd to ~ and then do M-x pwd it says ~ is located at C:\Users\Me\AppData\Roaming. It appears that emacs is reading the .emacs settings file because it loads my custom theme. However, if I try to find ~/.emacs Emacs doesn't see it. The file has all permissions on the file system for any user.

  Read the article

• Monit wont start/stop any processes

  - by Vaughan Magnusson

  Hi, I've got monit running on a linux vserver, installed in a custom location /home/user/bin/monit as that is the only suitable location according to the webhost providers. When I installed monit I used ./configure --prefix=/home/user Monit itself runs, and sends me emails of it's activity, and the control file syntax is correct. However, monit cannot seem to start or stop anything - or even run the simplest of scripts. eg. Using 'monit stop all', I try to run the following stop command stop = "/bin/bash /home/user/simple_script.sh" Which fails (and says so in the log). I cant figure out why this is failing, can anyone help with this?

  Read the article

• mount dev, proc, sys in a chroot environment?

  - by Patrick

  I'm trying to create a Linux image with custom picked packages. I followed the guide here http://www.olpcnews.com/forum/index.php?topic=4766.0 However, when I tried to install some packages, it failed to configure due to missing the proc, sys, dev directories. So, I learned from other places that I need to "mount" the host proc, ... directories to my chroot environment. Though, I saw two syntax and am not sure which one to use. In host machine: mount --bind /proc <chroot dir>/proc and another syntax (in chroot envrionment): mount -t proc none /proc Which one should I use, and what are the difference? Edit: What I'm trying to do is to hand craft the packages I'm going to use on an XO laptop, because compiling packages takes really long time on the real XO hardware, if I can build all the packages I need and just flash the image to the XO, I can save time and space.

  Read the article

• Nxlog Multiline Input to 1 Syslog Message

  - by Eric

  I am using nxlog to tail a custom log file on one of my Windows servers. Each entry in the text file looks similar to this. =================================================================================================================== 1/14/2014 3:08:48 PM DOMAIN\user1 adding group member... Domain: blah Group: TestGroup Member: CN=Joe Bob,CN=Users,DC=blah,DC=ARG,DC=com 1/14/2014 3:08:48 PM 1 member added.<br> ================================================================================================ I'm trying to send this log to my syslog server and I want to combine these multiple lines to 1 line so I can easily grep/search for specific users or groups. I've read some of the documentation on nxlog's website regarding multiline but haven't found a specific config to put them all in 1 entry with a syslog header. Thanks, Eric

  Read the article

• Cloud services, Public IPs and SIP

  - by Guido N

  I'm trying to run a custom SIP software (which uses JAIN SIP 1.2) on a cloud box. What I'd really like is to have a real public IP aka which is listed by "ifconfig -a" command. This is because atm I don't want to write additional SIP code / add a SIP proxy in order to manage private IP addresses / address translation. I gave Amazon EC2 a go, but as reported here http://stackoverflow.com/questions/10013549/sip-and-ec2-elastic-ips it's not fit for purpose (they do a 1:1 NAT translation between the private IP of the box and its Elastic IP). Does anyone know of a cloud service that provides real static public IP addresses?

  Read the article

• Sun Java keytool importing EV certificates into a single keystore

  - by ss0

  At my current job we are using tomcat, customers have custom web portals setup on their own local machines. EV certs are new to me, they have 2 part intermediary and a primary certificate. For our product to work it appears I need to get all three parts installed under a single keystore entry. How can I roll all three parts into a single x.509 compliant file for import? They syntax I am using is as follows: /blah/system/j2sdk/bin/keytool -import -alias foo -keystore /zix/system/jdk1.5.0_06/jre/lib/security/cacerts -file certname.pem -trustcacerts where foo = the keystore name and certname.pem is the main cert. I have tried importing the intermediate certs under their own names into the keystore and I don't know if it's just the product I have to work with (not vanilla tomcat) or what but it doesn't see those. I have seen a working system and all three certs were under the single keystore alias. Anyone have any ideas?

  Read the article

• Mac .flac player that organizes folder structure? Can Songbird write to a ntfs drive?

  - by CT

  I have a bunch of music in .flac format on my pc. I would like to put that music on an external drive which I can access from both my Mac and PC at work. I have the drive formatted in NTFS using MacFUSE and NTFS-3G drivers. Through Finder I write to the drive fine. If I go to Show Info I see that I have custom access. I am trying to use Songbird to play said .flac files. I have Folder Management turned on. When I try to import to Library it errors out and says make sure drive exists and is writable. This seems like a permissions issue but I do not see how I could change them. If anyone knows of a good .flac player for the mac that also organizes folder structures like iTunes please let me know. This and the ability to write to a NTFS drive is what I am looking for.

  Read the article

• Linux file permissions not being preserved

  - by yellavon

  I am deploying some custom software as root (a necessity for this situation). I set the owner/group to user1:user1 and set all the files to 644 beforehand in shell, then copy and deploy with ant. However, when files get copied over from the deployment directory, the ownership changes back to root and all the files install with 666 permissions. This seems to occur whether the file is overwritten or newly created. I believe there is a way to set an option in cp, mv commands to preserve permissions, but that would be a lot of commands to change. How can I fix this? Is there some setting I can change temporarily for root so the install always preserves the file permissions?

  Read the article

• Puppet, Nagios, Munin on cPanel based hosts

  - by WinkyWolly

  I've been managing 20-30~ cPanel based hosts over the past year with Puppet, Nagios and Munin for general monitoring / trending however a lot of the methods I've had to use to deploy / manage things such as configurations a pain. For those of you who aren't familiar with cPanel - it adds a few things to yum exclude such as perl*, ruby* and so forth. This causes issues with me being able to bootstrap monitoring on a new server via Puppet (well via the Package type) due to a bunch of conflicts with installing via Yum. Now I could create a custom RPM for everything and remove certain dependencies from the spec file however I would like to avoid this if possible. Does anyone have any proposed functional ways to manage this sort of environment? Currently I install Puppet, Facter and Munin via RPM's and force install using --nodeps and such (since they're installed, just no the ones Yum wants). Nagios I installed manually from source at this time (likely will create RPM's however I want to tackle this general issue first).

  Read the article

• How to display a graph only for business hours with CACTI?

  - by Blast Raider

  I have noticed that I can only display an uninterrupted period with Cacti. I am wondering whether is possible or not to make a custom graph which displaying only the business hours during a period (a week, a month, etc.). If it is possible, how could I configure it on Cacti ? For example, I would like to be able to display a graph with an average inbound/outbound traffic between 8am and 7pm for 5 business days a week of the last month. I would apreciate any help. Thank you.

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• Installing Linux kernel 2.6.25.14 on RHEL 5.4

  - by aaron

  I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

  Read the article

• freeradius maximum session time problem

  - by haw3d

  hello I'm using openvpn and free-radius for control user accounts. for maximum session time for an user, free-radius has sqlcounter.conf that control that, but after a connection has disconnected that is useful and cannot destroy a connection. for control account time dynamically i need another script that do that. but should anytime that a connection has established a trigger run. is anyway to fire a custom trigger or script when a connection has established? or any way to control session time dynamically?

  Read the article

• Funky mail sorting and grouping in Outlook 2007

  - by laurie

  In outlook 2007 I group mails in a folder by subject with mails in each subject group sorted by Received date (newest to oldest) This works fine; I tick 'Subject' and 'Show in groups' in the context menu of the folder's table header. Life is good. But the subject groups in the mail folder are sorted alphabetically. I would like the group which has the newest mail to be the first group. Similar to how the arrange by 'Conversation' works Can this be done? I'm not averse to an add-in/macro type solution if anyone can point me at examples of implementing custom sorting in Outlook

  Read the article

• Displaying Nagios on a 52" 1080p screen

  - by gdm

  I'm using a 52" 1080p LCD screen to monitor Nagios, positioned where most of the users can see it. Using the default Nagios web view sort of sucks, since you need to increase the text size a decent amount so it's legible from a distance, and then the "Current Network Status", "Host Status Totals", and other boxes along the top take up the majority of the screen realestate; you can't really see the list of host details. Is there a custom view for Nagios, or a plugin, or something available which is meant to display Nagios details on a large screen with large text?

  Read the article

• mod_access for lighttpd causes a 403 error for all POST requests

  - by Sam

  I have found on my debian server that running the lighttpd module mod_access is causing the server to response with a 403 to all POST requests. It's very odd as I have two servers, one is running as I'd expect and the other keeps returning these 403's. They are running identical configs for lighttpd and php. My lighttpd.conf is: https://gist.github.com/4269500 There is also one other custom conf: https://gist.github.com/4269508 I've opened up the servers for requests until I get this fixed, the server that works is http://mercury.isitup.org/ and the one that fails is http://venus.isitup.org/. After working out that disabling mod_access resolves the problem I greped all my lighttpd configs for uses of it (docs). Disabling each line I found didn't help, leading me to think this is perhaps some default behaviour (or bug?)... Has anyone come across this before or know what configuration value I've got wrong? Versions Debian: Debian GNU/Linux 6.0.6 (squeeze) Lighttpd: lighttpd/1.4.28 (ssl) PHP: PHP 5.3.19-1~dotdeb.0 with Suhosin-Patch (cli)

  Read the article

• Scaling up an apache server

  - by pehrs

  I have an Ubuntu server running apache2 which i expect to be hit by around 500-1000 (concurent) users for a limited amount of time. The server serves a mixture of custom (rather light) php pages connected to a postgresql db (around 20 Mb in size) and static content. The hardware is stable and pretty beefy: Intel Xeon E5420 @ 2.5 GHz 12 GB RAM During previous rushes on this server I have increased ServerLimit, the MaxClients for the MPM modules and decreased Timeout and KeepAliveTimeout. It has worked, but been sluggish and I have a feeling more can be done. How would you suggest configuring the Apache server to handle this kind of load?

  Read the article

• Network monitoring solution

  - by Hellfrost

  Hello Serverfault ! I have a big distributed system I need to monitor. Background: My system is comprised of two servers, concentrating and controlling the system. Each server is connected to a set of devices (some custom kind of RF controllers, doesnt matter to my question), each device connects to a network switch, and eventually all devices talk to the servers, the protocol between the servers and the devices is UDP, usually the packets are very small, but there are really a LOT of packets. the network is also somewhat complex, and is deployed on a large area physically. i'll have 150-300 of these devices, each generating up to 100+ packets per second, and several network switches, perhaps on 2 different subnets. Question I'm looking for some solution that will allow me to monitor all this mess, how many packets are sent, where, how do they move through the network, bandwidth utilization, throughput, stuff like that. what would you recommend to achieve this? BTW Playing nice with windows is a requirement.

  Read the article

• Group Policy for IE Security Zones

  - by Doug Luxem

  We are currently using the following Group Policy to control the Internet Explorer security zones: User Configuration\Administrative Templates\Windows Components\Internet Explorer\Internet Control Panel\Security Page Then setting the Site to Zone Assignment List with the various values using the following chart: Value Setting ------------------------------ 0 My Computer 1 Local Intranet Zone 2 Trusted sites Zone 3 Internet Zone 4 Restricted Sites Zone This works well; however, users are then unable to edit (or especially add) to their zone settings. Is there a way to lock in our custom zone settings while still giving users the ability to add their own sites to the security zones? Yes, I do realize the slight security risk in opening this up.

  Read the article

• Can you change the icon of a pinned IE 9 web application? And how do you do it?

  - by Rick Roth

  In IE 9 you have the ability to click and drag an open browser tab to the Windows 7 taskbar and pin the shortcut to the taskbar. This has the effect of creating a pseudo-application experience where the shortcut can have it's own custom jumplist and is not grouped with other IE 9 browser tabs on the taskbar. Windows uses the "shortcut icon" or "favicon" defined in the HTML for the icon on the taskbar. If no shortcut icon is defined, then the generic IE shortcut icon is used. If you have a bunch of these shortcuts pinned to the taskbar that don't have different icons it can be confusing to the user which is which. Can you change the icon of a pinned IE 9 web application? And how do you do it?

  Read the article

• Choosing A Power Supply [closed]

  - by Geeks On Hugs

  Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

  Read the article

• SharePoint - force user to accept AUP when first logging in etc

  - by Chris W

  We're looking to move a bespoke intranet across to SharePoint. One query that has come up is whether we can do the following easily: When user logs in for the first time they should be forced read and accept an Acceptable Use Policy for the site. Agree a separate agreement that relates to their data being shared with other parties. (Optional) upload their profile photo. They can skip this step if they don't have one but they should be prompted to do it each time they login subsequently. The above is all nice and easy in a bespoke app but I can't see how to do this with SharePoint. Can we build a custom workflow that is tied to the user logging in? So far I can only find how to attach workflows to libraries and lists.

  Read the article

• HP Rapid Deployment - Change Data Store Path

  - by David Carreyette

  I am running HP Rapid Deployment (Altiris eXpress Deployment Server 6.9 - Build 164) on an inherited Windows Server 2003 SP2. I need to change the Data Store Path as the default is pointing to the C: drive and there is not enough space there. I would like to set it to the D: drive where there is plenty of space. Reading the documentation: Data store path: Specifies the path to stored packages and files and other DS functions (such as license verification). The default path is C:\Program files\Altiris\express\Deployment Server. Note: Do not use this setting to change the path to the Deployment Share. Modifying this setting does not automatically allow you to use another shared directory other than the express share. To change the Deployment Share shared directory, run a Custom install to establish another location for the Deployment Share. Is there any other way I can change the path as I do not have the install media?

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >