Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 592/1359 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

• 1080p Screen resolution problem after 10.04 to 12.04 update

  - by Ale

  I have a Samsung LCD 40" with a NVidia GeForce 6150SE nForce 430 Card. I recently upgraded from 10.04 to 12.04 and the best resolution I can get is 1360x768. I've tried the propietary drivers available on the repository kmod:nvidia_current kmod:nvidia_173_updates kmod:nvidia_current_updates kmod:nvidia_96 kmod:nvidia_96_updates kmod:nvidia_173 I've also downloaded latest from NVidia's Web, version: 295.40. But still no luck. With Nouveau driver, I can only get 1024x768. I know there is no problem with my hardware (video card, cable and monitor), I was using it perfectly on 10.04. Can anybody suggest something else I could try, to get my 1920x1080 resolution back? Thanks in advance. Here are some more information, that I got reading other similar posts on askubuntu. $ lspci | grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1360 x 768, maximum 1360 x 768 default connected 1360x768 0 0 0mm x 0mm 1360x768 50.0 52.0* 1024x768 51.0 800x600 53.0 54.0 55.0 680x384 56.0 57.0 640x480 58.0 576x432 59.0 512x384 60.0 400x300 61.0 62.0 63.0 320x240 64.0

  Read the article

• "Untrusted packages could compromise your system's security." appears while trying to install anything

  - by maria

  Hi I've freshly installed Ubuntu 10.4 on a new computer. I'm trying to install on it application I need (my old computer is broken and I have to send it to the service). I've managed to install texlive and than I can't install anything else. All software I want to have is what I have succesfuly installed on my old computer (with the same version of Ubuntu), so I don't understand, why terminal says (sorry, the terminal talks half English, half Polish, but I hope it's enough): maria@marysia-ubuntu:~$ sudo aptitude install emacs Czytanie list pakietów... Gotowe Budowanie drzewa zaleznosci Odczyt informacji o stanie... Gotowe Reading extended state information Initializing package states... Gotowe The following NEW packages will be installed: emacs emacs23{a} emacs23-bin-common{a} emacs23-common{a} emacsen-common{a} 0 packages upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 23,9MB of archives. After unpacking 73,8MB will be used. Do you want to continue? [Y/n/?] Y WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. emacs emacs23-bin-common emacsen-common emacs23-common emacs23 Do you want to ignore this warning and proceed anyway? To continue, enter "Yes"; to abort, enter "No" I was trying to install other editors as well, with the same result. As I decided that I might be sure that I know the package I want to install is secure, finaly I've entered "Yes". The installation ended succesfuly, but editor don't understand any .tex file (.tex files are for sure fine): this is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./Szarfi.tex ! Undefined control sequence. l.2 \documentclass {book} ? What's more, I've realised that in Synaptic Manager there is no package which would be marked as supported by Canonical... Any tips? Thanks in advance

  Read the article

• How to lower wait time for repository updates

  - by Luis

  When doing a aptitude update / apt-get update or using the Update Manager to update sometimes I get to a repository link that takes too long. The percent does not end and it takes quite a while before it ignores it. How can I lower the time so that if a particular repository takes more than 10 seconds to connect or finish it should ignore it and move the following ones. Here is an image explaining the problem: It is trying to connect to archive.ubuntu.com but since it is taking too long it just sits there for at least 3 to 5 minutes (Haven't measured the time) and then it shows as ignored and moves to the following. I wish to change that to seconds instead of minutes.

  Read the article

• How can I undo this key mapping?

  - by user273872

  First of all sorry my punctuation will be bad. its hard to type when keys are not doing what you expect. Eg it keeps scaring the **** out of me by taking a screen shot when I push the up arrow lolol So anyways, I broke a key on my keyboard and used xkeycaps to remap it to an unused key which worked. But then I realized it screwed up other keys... I think this is the program I used http://www.jwz.org/xkeycaps/man.html And then after doing the modifications I found out how to save them from the second answer in this question How to Map my enter key to a different key down where it says this "When you are happy with your current keymap and want to use it in future X-sessions, run the following command to save it: xmodmap -pke ~/.Xmodmap"

  Read the article

• After reboot allocated node gets commissioned again

  - by cloudfan

  i had set up a maas with juju and deployed Openstack into it for testing. During my vacation i shut down all computers. Afterwards i started at first the maas server, then the node where juju was bootstrapped and juju-gui was deployed to. Sadly the node got commissioned again and so all my deployments are gone. I decomissioned the according node from the maas and bootstrapped it again. Afterwards i tested again juju bootstrapping the node, shutting down both nodes and starting them in the same order again. The Juju node gets commisioned again. After bootstrapping everything looked fine in the MAAS GUI (node was set to allocated to root, which was also the case after the restart) and also the JUJU GUI was available and juju status worked fine. Before my vacation i also had some other nodes deployed through juju. They all seem to be still available and have not been commisioned again. Do you have any ideas what might have happened? Is there any issue with a bootstrapped juju node and the commisioning? Any help or hints on what i could check are appreciated! Thank in advance for your help!

  Read the article

• custom session in lightdm "chrome os"

  - by profiler1982

  am do this sudo gedit /usr/share/xsessions/chromeos.desktop and i file: [Desktop Entry] Encoding=UTF-8 Name=Chrome OS Comment= Exec=google-chrome --standalone Type=Application in this way am have custom session in lightdm "chrome os" my keyboard input is qwertz but in this session, and in lightdm is qwerty how to change that? and how to expend this session. same thing am trying with play-on-linux becouse am have eee pc with 1.3ghz and 1gb ram

  Read the article

• Ubuntu will not load up from my USB

  - by Ryan Mungwira

  I have a Sony Vaio Duo 13 and I am trying to get Ubuntu 13.10 to run on a partition on my Ultrabook but it will not load up from the USB drive. It goes to the black screen that asks if you just want to Try Ubuntu or if you want to Install it. I click just to try and it will not load. It acts like it is going to start up but then it just goes to a blank black screen and then I have to a hard restart. It does that when I click install as well. And I have tried disabling the Secure Install on my computer as well and nothing happens! What do I do?!?

  Read the article

• How to install programs downloaded from the internet?

  - by Rosamunda Rosamunda

  I've downloadad the latest XAMPP file, to install it into Ubuntu 13.04. After downloading the file, I just can run it. I've double click it (and I've tried right click and clicking "open", whith the same result). All the answer I get is this message: Could not display “xampp-linux-1.8.3-1-installer.run”. There is no application installed for “executable” files. Do you want to search for an application to open this file? I've tried searching for an application, with no result... Also, I haven't found any questions related to this issue with the 13.04 Unity version... I've tried this solution, with no result. Please note that this isn't a Xampp question, the same happened to me when I tried to install Skype. UPDATE: I've tried this solution: cd ~/Downloads chmod +x myfile.run sudo sh myfile.run And I've got this error: Syntax error: "(" unexpected What should I do? Thanks!

  Read the article

• Why does Chrome crash on websites using the Awesome font?

  - by harry

  Since github using webfront for icons, every time I open github website that tab will crash. But other websites are not crash. I did everything I can, like disable all extensions, clean all cache, even create a new user profile, still not working. I'm using Ubuntu linux 12.04, last stable google chrome browser, always up to date. I searched from google and not found any one has the issue like mine. And I found any website using Font-Awesome my chrome tab will crash if I open that website.

  Read the article

• GUI for editing Menu in Xubuntu

  - by Borsook

  I see that Xubuntu has package Gnome-menus, but I cannot find the command to run the editor it should contain. I found a small editor but it does not allow new entries and alacarte tries to install whole Gnome... So I'm looking for a menu editor that will allow me to: Add new launchers, Edit existing ones Move existing ones to different categories Create new categories Won't install bazillion dependencies :)

  Read the article

• I can not install Ubuntu 14.04 due to some problem?

  - by user285643

  I have installed Window 8.1 on my HP laptop.Now I want to install Ubuntu 14.04,I try to use "Wubi" but when I use it, after installation on window, when my computer restart i have a message "No root file system is defined" I have read some thread here and i got some solution. One of them are "I must format my partition again, using ext4 format and mount on it". I did it by using Gparted in Try Ubuntu mode, but I got another message "/dev/sda contains GPT signatures,indicating that it has a GPT table. However, it does not have a valid fake msdos partition table,as it should. Perhaps it was corrupted--possibly by a program that does not understand GPT partition table. Or perhaps you deleted the GPT table, and are now using msdos partition table. Is this a GPT partition table?"

  Read the article

• HP dv2700 series, Wifi not working in Ubuntu 12.10, Wifi Button always disabled

  - by Chicoscience

  I have a HP dv2745se laptop. I always had Ubuntu with the Native Windows Vista and Wifi worked fine. Suddenly my Ubuntu wouldn't load anymore, I tried fixing it for a week and eventually I formatted its partition and just installed Ubuntu 12.10 This laptop has a Wifi switch that works fine in Vista disabling / enabling the wireless connection. HP Wireless Assistant in Windows say Wireless is on. However, whenever I log in Ubuntu the Wifi button is always orange (disabled) and Wireless never works. I had this problem once when I had Ubuntu 12.04 and I fixed it by verifying in Windows that the Wireless Assistant showed the Wireless LAN in "On" mode. However, the same does not work now. I've seen some possible solutions that involve updating the firmware with apt-get. There comes my 2nd problem, my network adapter card is not working and thus I have no internet at all. Any suggestions? Thanks!

  Read the article

• Has anyone got "Creative Soundblaster X-Fi Surround 5.1 Pro" - (usb Interface) installed?

  - by Vivek Sharma

  Has anyone tried this external usb sound blaster on ubuntu. http://us.store.creative.com/Sound-Blaster-XFi-Surround-5.1-Pro/M/B0044DEDCA.htm. I have bought M-Audio Bx5a deluxe Studio Monitors for my T61. I think the onboard Intel HD sound card will not do any justice to these speakers. So I am looking for an external sound interface. I particularly liked this one as it is not very expensive and it has a volume control (speaker lack a central-front volume knob). Has anyone been able to use this on ubuntu. Also, if anyone would like to recommend me another option?

  Read the article

• Reboot only shuts down and doesn't actually boot again

  - by PherricOxide

  I'm running a fresh install of Ubuntu 12.04 Server on an abmx rack mount server. When I attempt to reboot with sudo shutdown -r now, the machine just shuts down and doesn't come back up without me manually pressing the power button. The output of last -x, runlevel (to lvl 2) 3.2.0-29-generic Wed Oct 31 14:32 - 14:37 (00:05) reboot system boot 3.2.0-29-generic Wed Oct 31 14:32 - 14:37 (00:05) shutdown system down 3.2.0-29-generic Wed Oct 31 14:30 - 14:32 (00:02) runlevel (to lvl 6) 3.2.0-29-generic Wed Oct 31 14:30 - 14:30 (00:00) This appears to show that the system rebooted, but it went dark (no power lights, BIOS, etc) and I had to go press the power button in order to make it boot back up. The machine does have some sort of Intel Boot Agent that usually appears before the BIOS, I'm wondering if it could be causing this. I'm not sure what information is useful for debugging this, but I put the output of lshw in http://pastebin.com/mBy72kTQ

  Read the article

• Why does Ubuntu 12.10 only see 8 cores?

  - by tunnuz

  In our lab we just bought a new machine with two 8-cores Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz processors which also support Hyper-Threading. I would expect Ubuntu to see 32 processing units, however it only detects 8 of them (the equivalent of just one processor with Hyper-Threading disabled). The bios correctly reports a total of 32 processing units. I am using Ubuntu 12.10 desktop 32 bit. Any idea about how to solve this?

  Read the article

• How do I instal Skype on iMac G5 Ubuntu 12.04.1?

  - by Sergiu

  So I have this imac G5 model 8.7 running powerpc64. I can't install any of the .debs they have on skype.com because they're the wrong architecture and I also tried adding the partner repo for the software center but when I do sudo apt-get install skype it says it can't find the package as if the repo I just added doesn't exist. I added the repo with the following command: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" I'm running Ubuntu Release 12.04 (precise) 32-bit Kernel Linux 3.2.0-31-powerpc64-smp GNOME 3.4.2

  Read the article

• Broadcom bcm4311 rev2 Full disabled on battery

  - by Antonio BG

  Ok this is my problem... My problem begins while ago when I installed ubuntu 10.10. (is the same with 11.04,11.10...) My wireless card is disabled if the power cord is unplugged, and the only way to fix this is rebooting my pc WITH the power cord plugged and if I use lspci command, it doesn't show me the wireless card. is like if I've removed the wireless board from my laptop port. I've searched a lot of solutions for bcmw4311 issues, but none of them fix my problem because when apply one of the fixes, if I unplug the cord, my wireless card it just gone away... I have dual boot on my pc(w7,ubuntu), I've tried with full installation just to see if this is the problem, but not, is the same. On windows all work correctly with and without power cord.. so this is not a hardware problem, is more like a kernel problem. anyway I can use wireless with power cord plugged, but c'mon this is a laptop not a desktop pc XD haha any help is welcome

  Read the article

• Is there any performance difference between Ubuntu Unity and Classic/Fallback?

  - by user48949

  is there any difference between using Ubuntu Unity and Ubunt Classic/Fallback? Just to be clear, I'm not talking about the Launcher or the Dash. Of course Ubuntu Classic/Fallback doesn't have the Launcher/Dash, but this is not the difference I'm talking about. I mean differences related to performance, features, functionalities, compatibilities, etc. These kinds of differences. I'm asking this because I've heard the Fallback Mode is kind of "incomplete" when it's compared to Gnome Shell or Ubuntu Unity, so I just wanted to know whether or not it's true, because if it's true, I don't think using Fallback Mode is worth it.

  Read the article

• Ubuntu gets slower by the day

  - by Doug

  Ive noticed that Ubuntu has been getting slower and slower to boot, launch programs, etc. I installed 12.04 about 4 months ago,now 12.10, running on a quad-core Q8300 Intel, 4GB Ram, and an 80GB WD IDE drive. For some reason (ever since 11.04), Ive noticed after installation, the speed is good. The longer I have the OS installed, every bootup gets slower and slower, launching programs get slower, frame rates change radically(onboard GF9400 gets anywhere from 60fps down to 12 in worst cases). I would think maybe the HD is the issue, however I installed 11.10 on a 160GB SATA, and the same thing occurred. Looking at system resources, I'm holding steady at 1GB memory usage (I have 4GB, but it's actually showing 3.6GB, dunno why), no swap usage, and using right around 4% on cpu currently. HD capacity is only 28% used. Has anyone else ran into this issue? I love Ubuntu to death, but using other distros other than Ubuntu, I dont have this problem.

  Read the article

• Install Ubuntu 12.04 on Drive "D"?

  - by Bill Jones

  I have a Dell Inspiron 531S that originally came loaded with Windows Vista. A couple years ago I purchased a copy of Windows 7, formatted the hard drive and installed the updated operating system. In the process I formatted the 10 GB recovery drive partition on drive D as it was no longer needed for Windows Vista. I would really like to install Ubuntu 12.04 LTS alongside Windows 7 using the empty 10 GB drive D:. I have two questions. (1) Can Ubuntu be installed on a separate partition, a drive removed from the boot sector on drive C:? (2) If so would Grub be installed in the boot sector and properly select Windows 7 on drive C: or Ubuntu 12.04 on drive D?

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

• Ubuntu 14.04 stalling. Problem with LightDM. Plymouth (and logging out) switches over to a black screen w/ white cursor

  - by Kage

  if its a duplicate, sorry. Couldn't find anything that fits my issue, much less that was on 14.04. I changed a few things recently. Switched to the Numix theme (from PPA), installed lm-sensors and psensor (ran all the I/O probes), Ubuntu Tweak, Pinta, and well, Team Fortress 2 on Steam. :P The system will get to the Plymouth 'ubuntu' screen, load load, all dots filled, switches over to LightDM, but wait! No LightDM. :I Just a blank screen with that white cursor. Can't switch out to tty1-6 - not sure if the Ctrl-Alt-F1 is disabled in 14.04 or if its literally just locked down. If I change any files, I have access to the filesystem from my Windows 8 partition. That's it. :/ I'm pretty familiar with Linux, especially Ubuntu, but I think I'm still at the point I know just enough to break things and not always how to fix 'em. Any help would be greatly appreciated. Thanks! UPDATE I was just able to get into my desktop briefly. I booted Ubuntu. When the black screen froze, I hit Ctrl-Alt-Del. When it started switching off, I hit Ctrl-Alt-Backspace. It rebooted. I plugged the second monitor in I had been using before the issue ever came about. Plymouth displayed on both. LightDM came up, displayed on both (it used to show only the ubuntu logo on the unfocused monitor though). I logged in just fine. Even ran some pending software updates. I logged out of the desktop though, and LightDM refused to show again. xP

  Read the article

• WIfi Problems Ubuntu 13.10

  - by user289429

  i've been searching the forums for two days now but none of the answers seems to work for me. I have an acer extensa 5630 which has an Intel WIfi 5100. But even when i am right next to my router i cannot detect the wireless network. The weird thing is, that when i create a hotspot from my mobile phone it automatically detects it and connects to it.I think i do have the correct drivers installed. Thanks

  Read the article

• Regulating outgoing traffic on ubuntu VM

  - by DazSlayer

  I am making a virtual network setup for my high school cybersecurity team to practice. I am connecting all the VMs together through a VPN and then people who are practicing will VPN in and ssh/remote desktop into the different VMs. The problem is that for practicing, they will need root access into the VMs and because the VMs are connecting to my personal network, the VMs pose a security risk to my personal network. Is there any way in either VMWare or VirtualBox or even making an unchangeable iptable (I can make all the windows VMs go thru a linux VM) to prevent people from connecting to my local network via the VM?

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >