port 80 - Page 593 - Developer IT

Boost Netbook Speed with an SD Card & ReadyBoost

- by Matthew Guay

Looking for a way to increase the performance of your netbook? Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less. Even if you want to add more ram, often they can only be upgraded to a max of 2GB. With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory. If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note: ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds. Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer. Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this. Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer. It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before. This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used. Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive. You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier. Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit. We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less. SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

Read the article

Networking- Wireless and Wired not working

- by JJ White

So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

Read the article

problem with network-manager-pptp

- by Riuzaki90

I've a problema with the VPA CAble connection of my university... on the website of the university there's a .sh file that set all the variables of the connection in ETC/PPP/PEERS and another .sh file that call the connection...I'm on ubuntu 11.10 and when I run the setup.sh I have this error: impossible to find network-manager-pptp these are the two file that I had talk about: #!/bin/bash echo "Creazione della connessione in corso attendere........." apt-get update apt-get install pptp-linux network-manager-pptp echo -n "Digitare la propria Username: " read USERNAME echo -n "Digitare la propria Password: " read PASSWORD pptpsetup --create UNICAL_Campus_Access --server 160.97.73.253 --username $USERNAME --password $PASSWORD echo 'pty "pptp 160.97.73.253 --nolaunchpppd"' >/etc/ppp/peers/UNICAL_Campus_Access echo 'require-mppe-128' >>/etc/ppp/peers/UNICAL_Campus_Access echo 'file /etc/ppp/options.pptp'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'name '$USERNAME''>>/etc/ppp/peers/UNICAL_Campus_Access echo 'remotename PPTP'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'ipparam UNICAL_Campus_Access'>>/etc/ppp/peers/UNICAL_Campus_Access echo $USERNAME' PPTP '$PASSWORD' *'>>/etc/ppp/chap-secrets rm /etc/ppp/options.pptp echo '###############################################################################'>/etc/ppp/options.pptp echo '# $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# Sample PPTP PPP options file /etc/ppp/options.pptp'>>/etc/ppp/options.pptp echo '# Options used by PPP when a connection is made by a PPTP client.'>>/etc/ppp/options.pptp echo '# This file can be referred to by an /etc/ppp/peers file for the tunnel.'>>/etc/ppp/options.pptp echo '# Changes are effective on the next connection. See "man pppd".'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# You are expected to change this file to suit your system. As'>>/etc/ppp/options.pptp echo '# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/'>>/etc/ppp/options.pptp echo '# and the kernel MPPE module available from the CVS repository also on'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.'>>/etc/ppp/options.pptp echo '###############################################################################'>>/etc/ppp/options.pptp echo '# Lock the port'>>/etc/ppp/options.pptp echo 'lock'>>/etc/ppp/options.pptp echo '# Authentication'>>/etc/ppp/options.pptp echo '# We do not need the tunnel server to authenticate itself'>>/etc/ppp/options.pptp echo 'noauth'>>/etc/ppp/options.pptp echo '#We won"t do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2'>>/etc/ppp/options.pptp echo '#(you may need to remove these refusals if the server is not using MPPE)'>>/etc/ppp/options.pptp echo 'refuse-pap'>>/etc/ppp/options.pptp echo 'refuse-eap'>>/etc/ppp/options.pptp echo 'refuse-chap'>>/etc/ppp/options.pptp echo 'refuse-mschap'>>/etc/ppp/options.pptp echo '# Compression Turn off compression protocols we know won"t be used'>>/etc/ppp/options.pptp echo 'nobsdcomp'>>/etc/ppp/options.pptp echo 'nodeflate'>>/etc/ppp/options.pptp echo '# Encryption'>>/etc/ppp/options.pptp echo '# (There have been multiple versions of PPP with encryption support,'>>/etc/ppp/options.pptp echo '# choose with of the following sections you will use. Note that MPPE'>>/etc/ppp/options.pptp echo '# requires the use of MSCHAP-V2 during authentication)'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras'>>/etc/ppp/options.pptp echo '# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#require-mppe-128'>>/etc/ppp/options.pptp echo '#}}}'>>/etc/ppp/options.pptp echo '# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec'>>/etc/ppp/options.pptp echo '#ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#mppe required,stateless'>>/etc/ppp/options.pptp echo '# }}}'>>/etc/ppp/options.pptp echo "setup di 'UNICAL Campus Access' terminato correttamente" echo "per connettersi eseguire lo script 'UNICAL_Campus_Access.sh' " and the second: #!/bin/bash echo "Connessione alla Rete del Centro Residenziale in corso attendere........." modprobe ppp_mppe pppd call UNICAL_Campus_Access sleep 30 tail -n 8 /var/log/messages echo "Connessione Stabilita" echo -n "Per terminare la connessione premere invio (in alternativa eseguire il commando 'killall pppd'):----> " read CONN killall pppd echo "Connessione terminata" I've correctly installed network-manager-pptp to the latest version...help?

Read the article

F# in ASP.NET, mathematics and testing

- by DigiMortal

Starting from Visual Studio 2010 F# is full member of .NET Framework languages family. It is functional language with syntax specific to functional languages but I think it is time for us also notice and study functional languages. In this posting I will show you some examples about cool things other people have done using F#. F# and ASP.NET As I am ASP/ASP.NET MVP I am – of course – interested in how people use different languages and technologies with ASP.NET. C# MVP Tomáš Petrícek writes about developing ASP.NET MVC applications using F#. He also shows how to use LINQ To SQL in F# (using F# PowerPack) and provides sample solution and Visual Studio 2010 template for F# MVC web applications. You may also find interesting how you can create controllers in F#. Excellent work, Tomáš! Vladimir Matveev has interesting example about how to use F# and ApplicationHost class to process ASP.NET requests ouside of IIS. This is simple and very straight-forward example and I strongly suggest you to take a look at it. Very cool example is project Strom in Codeplex. Storm is web services testing tool that is fully written on F#. Take a look at this site because Codeplex offers also source code besides binaries. Math Functional languages are strong in fields like mathematics and physics. When I wrote my C# example about BigInteger class I found out that recursive version of Fibonacci algorithm in C# is not performing well. In same time I made same experiment on F# and in F# there were no performance problems with recursive version. You can find F# version of Fibonacci algorithm from Bob Palmer’s blog posting Fibonacci numbers in F#. Although golden spiral is useful for solving many problems I looked for some practical code example and found one. Kean Walmsley published in his Through the Interface blog very interesting posting Creating Fibonacci spirals in AutoCAD using F#. There are also other cool examples you may be interested in. Using numerical components by Extreme Optimization it is possible to make some numerical integration (quadrature method) using F# (also C# example is available). fsharp.it introduces factorials calculation on F#. Robert Pickering has made very good work on programming The Game of Life in Silverlight and F# – I definitely suggest you to try out this example as it is very illustrative too. Who wants something more complex may take a look at Newton basin fractal example in F# by Jonathan Birge. Testing After some searching and surfing I found out that there is almost everything available for F# to write tests and test your F# code. FsCheck - FsCheck is a port of Haskell's QuickCheck. Important parts of the manual for using FsCheck is almost literally "adapted" from the QuickCheck manual and paper. Any errors and omissions are entirely my responsibility. FsTest - This project is designed to Language Oriented Programming constructs around unit testing and behavior testing in F#. The goal of this project is to create a Domain Specific Language for testing F# code in a way that makes sense for functional programming. FsUnit - FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework. xUnit.NET - xUnit.net is a developer testing framework, built to support Test Driven Development, with a design goal of extreme simplicity and alignment with framework features. It is compatible with .NET Framework 2.0 and later, and offers several runners: console, GUI, MSBuild, and Visual Studio integration via TestDriven.net, CodeRush Test Runner and Resharper. It also offers test project integration for ASP.NET MVC. Getting started Well, as a first thing you need Visual Studio 2010. Then take a look at these resources: F# samples @ MSDN Microsoft F# Developer Center @ MSDN F# Language Reference @ MSDN F# blog F# forums Real World Functional Programming: With Examples in F# and C# (Amazon) Happy F#-ing! :)

Read the article

The busy developers guide to the Kinect SDK Beta

- by mbcrump

The Kinect is awesome. From day one, I’ve said this thing has got potential. After playing with several open-source Kinect projects, I am please to announce that Microsoft has released the official SDK beta on 6/16/2011. I’ve created this quick start guide to get you up to speed in no time flat. Let’s begin: What is it? The Kinect for Windows SDK beta is a starter kit for applications developers that includes APIs, sample code, and drivers. This SDK enables the academic research and enthusiast communities to create rich experiences by using Microsoft Xbox 360 Kinect sensor technology on computers running Windows 7. (defined by Microsoft) Links worth checking out: Download Kinect for Windows SDK beta – You can either download a 32 or 64 bit SDK depending on your OS. Readme for Kinect for Windows SDK Beta from Microsoft Research Programming Guide: Getting Started with the Kinect for Windows SDK Beta Code Walkthroughs of the samples that ship with the Kinect for Windows SDK beta (Found in \Samples Folder) Coding4Fun Kinect Toolkit – Lots of extension methods and controls for WPF and WinForms. Kinect Mouse Cursor – Use your hands to control things like a mouse created by Brian Peek. Kinect Paint – Basically MS Paint but use your hands! Kinect for Windows SDK Quickstarts Installing and Using the Kinect Sensor Getting it installed: After downloading the Kinect SDK Beta, double click the installer to get the ball rolling. Hit the next button a few times and it should complete installing. Once you have everything installed then simply plug in your Kinect device into the USB Port on your computer and hopefully you will get the following screen: Once installed, you are going to want to check out the following folders: C:\Program Files (x86)\Microsoft Research KinectSDK – This contains the actual Kinect Sample Executables along with the documentation as a CHM file. Also check out the C:\Users\Public\Documents\Microsoft Research KinectSDK Samples directory: The main thing to note here is that these folders contain the source code to the applications where you can compile/build them yourself. Audio NUI DEMO Time Let’s get started with some demos. Navigate to the C:\Program Files (x86)\Microsoft Research KinectSDK folder and double click on ShapeGame.exe. Next up is SkeletalViewer.exe (image taken from http://www.i-programmer.info/news/91-hardware/2619-microsoft-launch-kinect-sdk-beta.html as I could not get a good image using SnagIt) At this point, you will have to download Kinect Mouse Cursor – This is really cool because you can use your hands to control the mouse cursor. I actually used this to resize itself. Last up is Kinect Paint – This is very cool, just make sure you read the instructions! MS Paint on steroids! A few tips for getting started building Kinect Applications. It appears WPF is the way to go with building Kinect Applications. You must also use a version of Visual Studio 2010. Your going to need to reference Microsoft.Research.Kinect.dll when building a Kinect Application. Right click on References and then goto Browse and navigate to C:\Program Files (x86)\Microsoft Research KinectSDK and select Microsoft.Research.Kinect.dll. You are going to want to make sure your project has the Platform target set to x86. The Coding4Fun Kinect Toolkit really makes things easier with extension methods and controls. Just note that this is for WinForms or WPF. Conclusion It looks like we have a lot of fun in store with the Kinect SDK. I’m very excited about the release and have already been thinking about all the applications that I can begin building. It seems that development will be easier now that we have an official SDK and the great work from Coding4Fun. Please subscribe to my blog or follow me on twitter for more information about Kinect, Silverlight and other great technology. Subscribe to my feed

Read the article

Database Mirroring on SQL Server Express Edition

- by Most Valuable Yak (Rob Volk)

Like most SQL Server users I'm rather frustrated by Microsoft's insistence on making the really cool features only available in Enterprise Edition. And it really doesn't help that they changed the licensing for SQL 2012 to be core-based, so now it's like 4 times as expensive! It almost makes you want to go with Oracle. That, and a desire to have Larry Ellison do things to your orifices. And since they've introduced Availability Groups, and marked database mirroring as deprecated, you'd think they'd make make mirroring available in all editions. Alas…they don't…officially anyway. Thanks to my constant poking around in places I'm not "supposed" to, I've discovered the low-level code that implements database mirroring, and found that it's available in all editions! It turns out that the query processor in all SQL Server editions prepends a simple check before every edition-specific DDL statement: IF CAST(SERVERPROPERTY('Edition') as nvarchar(max)) NOT LIKE '%e%e%e% Edition%' print 'Lame' else print 'Cool' If that statement returns true, it fails. (the print statements are just placeholders) Go ahead and test it on Standard, Workgroup, and Express editions compared to an Enterprise or Developer edition instance (which support everything). Once again thanks to Argenis Fernandez (b | t) and his awesome sessions on using Sysinternals, I was able to watch the exact process SQL Server performs when setting up a mirror. Surprisingly, it's not actually implemented in SQL Server! Some of it is, but that's something of a smokescreen, the real meat of it is simple filesystem primitives. The NTFS filesystem supports links, both hard links and symbolic, so that you can create two entries for the same file in different directories and/or different names. You can create them using the MKLINK command in a command prompt: mklink /D D:\SkyDrive\Data D:\Data mklink /D D:\SkyDrive\Log D:\Log This creates a symbolic link from my data and log folders to my Skydrive folder. Any file saved in either location will instantly appear in the other. And since my Skydrive will be automatically synchronized with the cloud, any changes I make will be copied instantly (depending on my internet bandwidth of course). So what does this have to do with database mirroring? Well, it seems that the mirroring endpoint that you have to create between mirror and principal servers is really nothing more than a Skydrive link. Although it doesn't actually use Skydrive, it performs the same function. So in effect, the following statement: ALTER DATABASE Mir SET PARTNER='TCP://MyOtherServer.domain.com:5022' Is turned into: mklink /D "D:\Data" "\\MyOtherServer.domain.com\5022$" The 5022$ "port" is actually a hidden system directory on the principal and mirror servers. I haven't quite figured out how the log files are included in this, or why you have to SET PARTNER on both principal and mirror servers, except maybe that mklink has to do something special when linking across servers. I couldn't get the above statement to work correctly, but found that doing mklink to a local Skydrive folder gave me similar functionality. To wrap this up, all you have to do is the following: Install Skydrive on both SQL Servers (principal and mirror) and set the local Skydrive folder (D:\SkyDrive in these examples) On the principal server, run mklink /D on the data and log folders to point to SkyDrive: mklink /D D:\SkyDrive\Data D:\Data On the mirror server, run the complementary linking: mklink /D D:\Data D:\SkyDrive\Data Create your database and make sure the files map to the principal data and log folders (D:\Data and D:\Log) Viola! Your databases are kept in sync on multiple servers! One wrinkle you will encounter is that the mirror server will show the data and log files, but you won't be able to attach them to the mirror SQL instance while they are attached to the principal. I think this is a bug in the Skydrive, but as it turns out that's fine: you can't access a mirror while it's hosted on the principal either. So you don't quite get automatic failover, but you can attach the files to the mirror if the principal goes offline. It's also not exactly synchronous, but it's better than nothing, and easier than either replication or log shipping with a lot less latency. I will end this with the obvious "not supported by Microsoft" and "Don't do this in production without an updated resume" spiel that you should by now assume with every one of my blog posts, especially considering the date.

Read the article

jtreg update, March 2012

- by jjg

There is a new update for jtreg 4.1, b04, available. The primary changes have been to support faster and more reliable test runs, especially for tests in the jdk/ repository. [ For users inside Oracle, there is preliminary direct support for gathering code coverage data using jcov while running tests, and for generating a coverage report when all the tests have been run. ] -- jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg/. Scratch directories On platforms like Windows, if a test leaves a file open when the test is over, that can cause a problem for downstream tests, because the scratch directory cannot be emptied beforehand. This is addressed in agentvm mode by discarding any agents using that scratch directory and starting new agents using a new empty scratch directory. Successive directives use suffices _1, _2, etc. If you see such directories appearing in the work directory, that is an indication that files were left open in the preceding directory in the series. Locking support Some tests use shared system resources such as fixed port numbers. This causes a problem when running tests concurrently. So, you can now mark a directory such that all the tests within all such directories will be run sequentially, even if you use -concurrency:N on the command line to run the rest of the tests in parallel. This is seen as a short term solution: it is recommended that tests not use shared system resources whenever possible. If you are running multiple instances of jtreg on the same machine at the same time, you can use a new option -lock:file to specify a file to be used for file locking; otherwise, the locking will just be within the JVM used to run jtreg. "autovm mode" By default, if no options to the contrary are given on the command line, tests will be run in othervm mode. Now, a test suite can be marked so that the default execution mode is "agentvm" mode. In conjunction with this, you can now mark a directory such that all the tests within that directory will be run in "othervm" mode. Conceptually, this is equivalent to putting /othervm on every appropriate action on every test in that directory and any subdirectories. This is seen as a short term solution: it is recommended tests be adapted to use agentvm mode, or use "@run main/othervm" explicitly. Info in test result files The user name and jtreg version info are now stored in the properties near the beginning of the .jtr file. Build The makefiles used to build and test jtreg have been reorganized and simplified. jtreg is now using JT Harness version 4.4. Other jtreg provides access to GNOME_DESKTOP_SESSION_ID when set. jtreg ensures that shell tests are given an absolute path for the JDK under test. jtreg now honors the "first sentence rule" for the description given by @summary. jtreg saves the default locale before executing a test in samevm or agentvm mode, and restores it afterwards. Bug fixes jtreg tried to execute a test even if the compilation failed in agentvm mode because of a JVM crash. jtreg did not correctly handle the -compilejdk option. Acknowledgements Thanks to Alan, Amy, Andrey, Brad, Christine, Dima, Max, Mike, Sherman, Steve and others for their help, suggestions, bug reports and for testing this latest version.

Read the article

Laptop screen blank after login when external monitor is not connected

- by Ramon Suarez

Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

Read the article

Using 3G/UMTS in Mauritius

After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

Read the article

about the JOGL 2 problem

- by Chuchinyi

Please some help me about the JOGL 2 problem(Sorry for previous error format). I complied JOGL2Template.java ok. but execut it with following error. D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more there is JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } }

Read the article

Silverlight Cream for December 27, 2010 -- #1016

- by Dave Campbell

In this Issue: Sacha Barber, David Anson, Jesse Liberty, Shawn Wildermuth, Jeff Blankenburg(-2-), Martin Krüger, Ryan Alford(-2-), Michael Crump, Peter Kuhn(-2-). Above the Fold: Silverlight: "Part 4 of 4 : Tips/Tricks for Silverlight Developers" Michael Crump WP7: "Navigating with the WebBrowser Control on WP7" Shawn Wildermuth Shoutouts: John Papa posted that the open call is up for MIX11 presenters: Your Chance to Speak at MIX11 From SilverlightCream.com: Aspect Examples (INotifyPropertyChanged via aspects) If you're wanting to read a really in-depth discussion of aspect oriented programming (AOP), check out the article Sacha Barber has up at CodeProject discussing INPC via aspects. How to: Localize a Windows Phone 7 application that uses the Windows Phone Toolkit into different languages David Anson has a nice tutorial up on localizing your WP7 app, including using the Toolkit and controls such as DatePicker... remember we're talking localized Windows Phone From Scratch – Animation Part 1 Jesse Liberty continues in his 'From Scratch' series with this first post on WP7 Animation... good stuff, Jesse! Navigating with the WebBrowser Control on WP7 In building his latest WP7 app, Shawn Wildermuth ran into some obscure errors surrounding browser.InvokeScript. He lists the simple solution and his back, refresh, and forward button functionality for us. What I Learned In WP7 – Issue #7 In the time I was out, Jeff Blankenburg got ahead of me, so I'll catch up 2 at a time... in this number 7 he discusses making videos of your apps, links to the Learn Visual Studio series, and his new website What I Learned In WP7 – Issue #8 Jeff Blankenburg's number 8 is a very cool tip on using the return key on the keyboard to handle the loss of focus and handling of text typed into a textbox. Resize of a grid by using thumb controls Martin Krüger has a sample in the Expression Gallery of a grid that is resizable by using 'thumb controls' at the 4 corners... all source, so check it out! Silverlight 4 – Productivity Power Tools and EF4 Ryan Alford found a very interesting bug associated with EF4 and the Productivity Power Tools, and the way to get out of it is just weird as well. Silverlight 4 – Toolkit and Theming Ryan Alford also had a problem adding a theme from the Toolkit, and what all you might have to do to get around this one.... Part 4 of 4 : Tips/Tricks for Silverlight Developers. Michael Crump has part 4 of his series on Silverlight Development tips and tricks. This is numbers 16 through 20 and covers topics such as Version information, Using Lambdas, Specifying a development port, Disabling ChildWindow Close button, and XAML cleanup. The XML content importer and Windows Phone 7 Peter Kuhn wanted to use the XML content inporter with a WP7 app and ran into problems implementing the process and a lack of documentation as well... he pounded through it all and has a class he's sharing for loading sounds via XML file settings. WP7 snippet: analyzing the hyperlink button style In a second post, Peter Kuhn responds to a forum discussion about the styles for the hyperlink button in WP7 and why they're different than SL4 ... and styles-to-go to get all the hyperlink goodness you want... wrapped text, or even non-text content. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Java Spotlight Episode 76: Pro Java FX2 - A Definative Guide to Rich Clients with Java Technology

- by Roger Brinkley

Tweet An interview with the authors of Pro Java FX2: A Definative Guide to Rich Clients with Java Technology. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Angela Caicedo has created 3 new Java FX screen cast videos on java UTube channel: Part 1: Building your First Java FX Application with Netbeans 7.1, Part 2: Building your First Java FX Application with Netbeans 7.1, and Getting Started with Scene Builder. Events March 26-29, EclipseCon, Reston, USA March 27, Virtual Developer Days - Java (Asia Pacific (English)),9:30 am to 2:00pm IST / 12:00pm to 4.30pm SGT / 3.00pm - 7.30pm AEDT April 4-5, JavaOne Japan, Tokyo, Japan April 12, GreenJUG, Greenville, SC April 17-18, JavaOne Russia, Moscow Russia April 18–20, Devoxx France, Paris, France April 26, Mix-IT, Lyon, France, May 3-4, JavaOne India, Hyderabad, India Feature InterviewPro JavaFX 2: A Definitive Guide to Rich Clients with Java Technology is available from Amazon.com in either paperback or on the Kindle.James L. (Jim) Weaver is a Java and JavaFX developer, author, and speaker with a passion for helping rich-client Java and JavaFX become preferred technologies for new application development. Books that Jim has authored include Inside Java, Beginning J2EE, and Pro JavaFX Platform, with the latter being updated to cover JavaFX 2.0. His professional background includes 15 years as a systems architect at EDS, and the same number of years as an independent developer. Jim is an international speaker at software technology conferences, including the JavaOne conferences in San Francisco and São Paulo. Jim blogs at http://javafxpert.com, tweets @javafxpert. Weiqi Gao is a principal software engineer with Object Computing, Inc., in St. Louis, MO. He has more than 18 years of software development experience and has been using Java technology since 1998. He is interested in programming languages, object-oriented systems, distributed computing, and graphical user interfaces. He is a presenter and a member of the steering committee of the St. Louis Java Users Group. Weiqi holds a PhD in mathematics. Stephen Chin is chief agile methodologist at GXS and a technical expert in client UI technologies. He is lead author on the Pro Android Flash title and coauthored the Pro JavaFX Platform title, which is the leading technical reference for JavaFX. In addition, Stephen runs the very successful Silicon Valley JavaFX User Group, which has hundreds of members and tens of thousands of online viewers. Finally, he is a Java Champion, chair of the OSCON Java conference, and an internationally recognized speaker featured at Devoxx, Codemash, AnDevCon, Jazoon, and JavaOne, where he received a Rock Star Award. Stephen can be followed on twitter @steveonjava and reached via his blog: http://steveonjava.com.Dean Iverson has been writing software professionally for more than 15 years. He is employed by the Virginia Tech Transportation Institute, where he is a rich client application developer. He also has a small software consultancy called Pleasing Software Solutions, which he cofounded with his wife. Johan Vos started to work with Java in 1995. As part of the Blackdown team, he helped port Java to Linux. With LodgON, the company he cofounded, he has been mainly working on Java-based solutions for social networking software. Because he can't make a choice between embedded development and enterprise development, his main focus is on end-to-end Java, combining the strengths of backend systems and embedded devices. His favorite technologies are currently Java EE/Glassfish at the backend and JavaFX at the frontend. Johan's blog can be followed at http://blogs.lodgon.com/johan, he tweets at http://twitter.com/johanvos. Mail Bag What’s Cool Gerrit Grunwald's SteelSeries FX Experience Tools Canned Animations ComboBox

Read the article

How to check if a cdrom is in the tray remotely (via ssh)?

- by adempewolff

I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

Read the article

Low level programming - what's in it for me?

- by back2dos

For years I have considered digging into what I consider "low level" languages. For me this means C and assembly. However I had no time for this yet, nor has it EVER been neccessary. Now because I don't see any neccessity arising, I feel like I should either just schedule some point in time when I will study the subject or drop the plan forever. My Position For the past 4 years I have focused on "web technologies", which may change, and I am an application developer, which is unlikely to change. In application development, I think usability is the most important thing. You write applications to be "consumed" by users. The more usable those applications are, the more value you have produced. In order to achieve good usability, I believe the following things are viable Good design: Well-thought-out features accessible through a well-thought-out user interface. Correctness: The best design isn't worth anything, if not implemented correctly. Flexibility: An application A should constantly evolve, so that its users need not switch to a different application B, that has new features, that A could implement. Applications addressing the same problem should not differ in features but in philosophy. Performance: Performance contributes to a good user experience. An application is ideally always responsive and performs its tasks reasonably fast (based on their frequency). The value of performance optimization beyond the point where it is noticeable by the user is questionable. I think low level programming is not going to help me with that, except for performance. But writing a whole app in a low level language for the sake of performance is premature optimization to me. My Question What could low level programming teach me, what other languages wouldn't teach me? Am I missing something, or is it just a skill, that is of very little use for application development? Please understand, that I am not questioning the value of C and assembly. It's just that in my everyday life, I am quite happy that all the intricacies of that world are abstracted away and managed for me (mostly by layers written in C/C++ and assembly themselves). I just don't see any concepts, that could be new to me, only details I would have to stuff my head with. So what's in it for me? My Conclusion Thanks to everyone for their answers. I must say, nobody really surprised me, but at least now I am quite sure I will drop this area of interest until any need for it arises. To my understanding, writing assembly these days for processors as they are in use in today's CPUs is not only unneccesarily complicated, but risks to result in poorer runtime performance than a C counterpart. Optimizing by hand is nearly impossible due to OOE, while you do not get all kinds of optimizations a compiler can do automatically. Also, the code is either portable, because it uses a small subset of available commands, or it is optimized, but then it probably works on one architecture only. Writing C is not nearly as neccessary anymore, as it was in the past. If I were to write an application in C, I would just as much use tested and established libraries and frameworks, that would spare me implementing string copy routines, sorting algorithms and other kind of stuff serving as exercise at university. My own code would execute faster at the cost of type safety. I am neither keen on reeinventing the wheel in the course of normal app development, nor trying to debug by looking at core dumps :D I am currently experimenting with languages and interpreters, so if there is anything I would like to publish, I suppose I'd port a working concept to C, although C++ might just as well do the trick. Again, thanks to everyone for your answers and your insight.

Read the article

Deploy Oracle Management Agent using RPM File

- by cristiano.toni

Normal 0 21 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tableau Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times","serif"; mso-ansi-language:FR;} 1) Create a rpm package on Enterprise Manager 12c a) as Root : # yum install rpmbuild # mkdir /usr/lib/oracle b) as oracle user # cd $<OMS_HOME>/bin/ # emcli get_supported_platforms ----------------------------------------------- Version = 12.1.0.3.0 Platform = Linux x86-64 ----------------------------------------------- Platforms list displayed successfully. # emcli get_agentimage_rpm -destination=/tmp/agentRPM -platform="Linux x86-64" \ -version=12.1.0.3.0 Platform:Linux x86-64 Destination:/tmp/agentRPM Exalogic:false Checking for disk space requirements... === Partition Detail === Space free : 6 GB Space required : 1 GB RPM creation in progress ... Check the logs at /Oracle/gc_inst/em/EMGC_OMS1/sysman/emcli/setup/.emcli/get_agentimage_rpm_date-PM.log Copying agent image from software library to /tmp/agentRPM Setting property ORACLE_HOME to:/Oracle/middleware/oms calling pulloneoffs with arguments:/Oracle/middleware/oms/Oracle/middleware/oms/sysman/agent/ \ 12.1.0.3.0_AgentCore_226.zip12.1.0.3.0Linux x86-64/tmp/agentRPMtrue Agent Image copied successfully... Creation of RPM started... RPM creation successful. Agent image to rpm conversion completed successfully 2) Copy it on all new hosts and install it. As Root user : c) check and install rpm file # rpm -ivh --test oracle-agt-12.1.0.3.0-1.0.x86_64.rpm Preparing... ########################################### [100%] # rpm -ivh oracle-agt-12.1.0.3.0-1.0.x86_64.rpm Preparing... ########################################### [100%] Running the prereq 1:oracle-agt ########################################### [100%] Agent RPM installation is completed successfully. Now to configure the agent follow the below steps: 1. Edit the properties file: /usr/lib/oracle/agent/agent.properties with the correct values 2. Execute the script /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties d) create a user for the agent: # useradd -m -d /home/em12adm -s /bin/bash -g dba -G oinstall em12adm # passwd em12adm e) Edit file /usr/lib/oracle/agent/agent.properties # vi /usr/lib/oracle/agent/agent.properties OMS_HOST=<host_Enterprise_Manager> OMS_PORT=<HTTPS Upload Port > AGENT_REGISTRATION_PASSWORD=oracle AGENT_USERNAME=em12adm AGENT_GROUP=dba ORACLE_HOSTNAME=oraclevm-mgmt # chown -R em12adm:dba /usr/lib/oracle/agent/ Start agent and register the new host server on EM12c # /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties Now you have registered on EM12C your new target host.

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

PENGUIN IS GETTING READY FOR ORACLE OPENWORLD 2012

- by Zeynep Koch

Are you looking for reasons to attend Oracle Openworld, how about below Oracle Linux sessions and hands-on-labs. 1. General Session: Oracle Linux Strategy and Roadmap In this session, Oracle executives will discuss Linux strategy; the roadmap; contributions to the Linux mainline kernel; and what's in store for upcoming releases of Oracle Linux and the Unbreakable Enterprise Kernel. Don’t miss this session. 2. New Features in Oracle Linux- A Technical Deep Dive Collaborating with the Linux community, Oracle engineers contribute to advancing Linux for mission-critical deployments. In this technical session, attendees will learn about the recent developments in Oracle Linux and the Unbreakable Enterprise Kernel 3. Why Switch to Oracle Linux? Oracle is the only company that provides a complete Linux solution from applications to disk, fully optimized for Oracle hardware and software, with one-stop support. In this session you will hear from two customers that have successfully implemented Oracle Linux and saved 50 to 90 percent on Linux support costs as well as the reasons to switch to Oracle Linux. 4. Debugging and Configuration Best Practices for Oracle Linux This is one of our best attended sessions and most informative. In this best practices session, learn how to save time and money while preventing headaches and hassles. Discover expert secrets to get your Linux systems up and running (and keep them running), avoid common pitfalls, prevent problems, and circumvent known issues. 5. Top Technical Tips for Automatic and Secure Oracle Linux Deployments In this session, attendees will learn about how to easily deploy and install Oracle Linux systems using various technologies like Kickstart, Oracle Enterprise Manager OpsCenter, and Oracle VM Templates for applications on Linux. Additionally, the session will share useful Linux security tips and introduce utilities to help with hardening and securely operating an Oracle Linux system. We also have a great session in Oracle Develop track: 6. DTrace for Oracle Linux Initially announced at last year's Oracle Openworld, DTrace for Oracle Linux is now available for the Unbreakable Enterprise Kernel R.2. In this session held by one of the engineers working on the DTrace for Linux port, you will learn how you can use this powerful and flexible framework in your development environment. If you prefer to really have practical experience, don’t miss our two Hands-on-Labs where we will cover: HOL-1 : Oracle Linux Package Management: Configuring and Enabling Services In this session you will be Installing and configuring Oracle VM VirtualBox, importing the Oracle Linux virtual appliance. You will then use the package management on Oracle Linux using RPM and yum. You will also be able to review Ksplice, zero downtime kernel updates that enable you to apply security updates, patches and critical bug fixes without rebooting. HOL-2: Oracle Linux Storage Management with LVM and Device Mapper In this session you will learn about storage management with LVM2, the Linux Logical Volume Manager, Btrfs, preparing block devices, creating physical and logical volumes, creating file systems on top of logical volumes, and resizing file systems dynamically. You will also practice setting up software RAID devices, configuring encrypted block devices. You will also see Oracle Linux and Kpslice in the three demopods we will feature at Exhibition demogrounds. One in MySQL Connect and two in Oracle Openworld. What more do you need to come to San Francisco? Oh, I forgot to mention we also have great weather in fall.. Check out the Content Catalog and register to attend Oracle Linux sessions.

Read the article

Mind Reading with the Raspberry Pi

- by speakjava

Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi". As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi. This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky. I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology. At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready. The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up. Part of Neurosky's innovation is the development of this simple dry-sensor technology. Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication. Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0. Neurosky have published details of the command protocol. In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going. Back in the dim distant past there was the Java Comm API. Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm. This can be installed easily on the Pi using sudo apt-get install librxtx-java. Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset. The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset. You can download a complete NetBeans project for this here. This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux. I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset. Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi. I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX. Yet another NetBeans project is available here. Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on. Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

Read the article

how to do loop for array which have different data for each array

- by Suriani Salleh

i have this file XML file.. I need to convert it form XMl to MYSQL. if it have only one array than i know how to do it.. now my question how to extract this two array Each array will have different value of data..for example for first array, pmIntervalTxEthMaxUtilization data : 0,74,0,0,48 and for second array pmIntervalRxPowerLevel data: -79,-68,-52 , pmIntervalTxPowerLevel data: 13,11,-55 . can some one help to guide how write php code to extract this xml file to MY SQL <mi> <mts>20130618020000</mts> <gp>900</gp> <mt>pmIntervalRxUndersizedFrames</mt> [ this is first array] <mt>pmIntervalRxUnicastFrames</mt> <mt>pmIntervalTxUnicastFrames</mt> <mt>pmIntervalRxEthMaxUtilization</mt> <mt>pmIntervalTxEthMaxUtilization</mt> <mv> <moid>port:1:3:23-24</moid> <sf>FALSE</sf> <r>0</r> [the data for 1st array i want to insert in DB] <r>0</r> <r>0</r> <r>5</r> <r>0</r> </mv> </mi> <mi> <mts>20130618020000</mts> <gp>900</gp> <mt>pmIntervalRxSES</mt> [this is second array] <mt>pmIntervalRxPowerLevel</mt> <mt>pmIntervalTxPowerLevel</mt> <mv> <moid>client:1:3:23-24</moid> <sf>FALSE</sf> <r>0</r> [the data for 2nd array i want to insert in DB] <r>-79</r> <r>13</r> </mv> </mi> this is the code for one array that i write..i dont know how to write code for two array because the field appear two times and have different data value for each array // Loop through the specified xpath foreach($xml->mi->mv as $subchild) { $port_no = $subchild->moid; $rx_ses = $subchild->r[0]; $rx_es = $subchild->r[1]; $tx_power = $subchild->r[10]; // dump into database; ........................... i have do a little research on it this is the out come... $i = 0; while( $i < 5) { // Loop through the specified xpath foreach($xml->md->mi->mv as $subchild) { $port_no = $subchild->moid; $rx_uni = $subchild->r[10]; $tx_uni = $subchild->r[11]; $rx_eth = $subchild->r[16]; $tx_eth = $subchild->r[17]; // dump into database; .............................. $i++; if( $i == 5 )break; } } // Loop through the specified xpath foreach($xml->mi->mv as $subchild) { $port_no = $subchild->moid; $rx_ses = $subchild->r[0]; $rx_es = $subchild->r[1]; $tx_power = $subchild->r[10]; // dump into database; .......................

Read the article

Nec USB 3.0 controller drops connection - Ubuntu 12.04.1

- by Tom

I have some serious problems with Technaxx pci-e 302p card. It has uPD720200a NEC chip with 4020 firmware. BIOS recognises it. Sometimes it recognises devices and system mounts them and are functional for few minutes, other times they can't be mount and error occours. After fresh install card worked fine, but after kernel and firmware update it behaves as mentioned. Outputs: uname -a Linux asd-GA-MA770-UD3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lspci -vvv USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fd8fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT3072] Bus 005 Device 004: ID 1997:1221 Bus 005 Device 003: ID 15c2:003c SoundGraph Inc. lsmod Module Size Used by nls_iso8859_1 12713 0 nls_cp437 16991 0 vfat 17585 0 fat 61512 1 vfat vesafb 13844 1 saa7134_alsa 18602 1 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep tda827x 18182 1 snd_hda_codec_hdmi 32474 1 ir_lirc_codec 12859 0 lirc_dev 19204 1 ir_lirc_codec tda8290 22616 1 arc4 12529 2 snd_hda_codec_realtek 224173 1 ir_mce_kbd_decoder 12777 0 ir_sony_decoder 12510 0 ir_jvc_decoder 12507 0 tuner 27428 1 ir_rc6_decoder 12507 0 snd_hda_intel 33773 5 rt2800usb 22684 0 rt2800lib 58925 1 rt2800usb crc_ccitt 12667 1 rt2800lib rt2x00usb 20762 1 rt2800usb rt2x00lib 51144 3 rt2800usb,rt2800lib,rt2x00usb mac80211 506816 3 rt2800lib,rt2x00usb,rt2x00lib ir_rc5_decoder 12507 0 rc_avermedia_m135a 12526 0 rc_imon_pad 12505 0 ir_nec_decoder 12507 0 cfg80211 205544 2 rt2x00lib,mac80211 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_ctxfi 111202 2 snd_hwdep 13668 1 snd_hda_codec imon 32839 0 snd_pcm 97188 5 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ctxfi snd_seq_midi 13324 0 saa7134 181851 1 saa7134_alsa videobuf_dma_sg 19354 2 saa7134_alsa,saa7134 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi joydev 17693 0 rc_core 26412 13 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_avermedia_m135a,rc_imon_pad,ir_nec_decoder,imon,saa7134 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 101 videobuf_core 26390 2 saa7134,videobuf_dma_sg v4l2_common 16454 2 tuner,saa7134 videodev 98259 3 tuner,saa7134,v4l2_common sp5100_tco 13791 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 28 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_ctxfi,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device v4l2_compat_ioctl32 17128 1 videodev tveeprom 21249 1 saa7134 i2c_piix4 13301 0 soundcore 15091 1 snd edac_core 53746 0 serio_raw 13211 0 snd_page_alloc 18529 3 snd_hda_intel,snd_ctxfi,snd_pcm edac_mce_amd 23709 0 wmi 19256 0 mac_hid 13253 0 ppdev 17113 0 parport_pc 32866 1 k10temp 13166 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usb_storage 49198 0 uas 18180 0 usbhid 47199 0 hid 99559 1 usbhid firewire_ohci 41000 0 firewire_core 63558 1 firewire_ohci crc_itu_t 12707 1 firewire_core floppy 70365 0 pata_atiixp 13204 2 r8169 62099 0 dmesg | tail after plugging to usb 3.0 port [ 834.871296] sd 9:0:0:0: rejecting I/O to offline device [ 834.871308] sd 9:0:0:0: rejecting I/O to offline device [ 834.871319] sd 9:0:0:0: rejecting I/O to offline device [ 834.871330] sd 9:0:0:0: rejecting I/O to offline device [ 834.871530] sd 9:0:0:0: [sdd] Unhandled error code [ 834.871536] sd 9:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 834.871545] sd 9:0:0:0: [sdd] CDB: Read(10): 28 00 0e 8e 48 0a 00 00 3e 00 [ 834.871564] end_request: I/O error, dev sdd, sector 244205578 [ 834.875497] sd 8:0:0:1: Device offlined - not ready after error recovery [ 834.885339] usb 9-2: USB disconnect, device number 2 Are there any other outputs need for answering? I'll post them ASAP. I could of course reject updating the system but I think it's halfway solution. Any help appreciated. BTW USB 2.0 and 1.1 ports run well, card itself runs under win7 as charm. Tom

Read the article

Launching Ops Center 12c

- by user12601629

Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo. I thought that sounded like a fine idea! You see, I have always loved Japan. I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year. It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming. If you've never been in Japan for cherry blossom season, it's a must see! Here are a couple of pics for you. Here is a picture from Roppongi, near the conference. Here's a picture near the Imperial Palace. A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address. It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products. It was a packed house for the keynote. Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean? It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86. Now you can build clouds of Solaris Zones with ease! Second, we've much more deeply integrated high-end storage and network management into the cloud layers. These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11. That would have been easy, but also boring! We support S11 deeply. Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework. If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems. These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage. We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components. The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner. It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas. Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

Read the article

Using the latest (stable release) of Oracle Developer Tools for Visual Studio 11.1.0.7.20.

- by mbcrump

+ = Simple and safe Data connections. This guide is for someone wanting to use the latest ODP.NET quickly without reading the official documentation. This guide will get you up and running in about 15 minutes. I have reviewed my referral link to my simple Setting up ODP.net with Win7 x64 and noticed most people were searching for one of the following terms: “how to use odp.net with vs” “setup connection odp.net” “query db using odp and vs” While my article provided links and a sample tnsnames.ora file, it really didn’t tell you how to use it. I’m hoping that this brief tutorial will help. So before we get started, you will need the following: Download the following: www.oracle.com/technology/software/tech/dotnet/utilsoft.html from oracle and install it. It is the first one on the page. Visual Studio 2008 or 2010. It should be noted that The System.Data.OracleClient namespace is the OLD .NET Framework Data Provider for Oracle. It should not be used anymore as it has been depreciated. The latest version which is what we are using is Oracle.DataAccess.Client. First things first, Add a reference to the Oracle.DataAccess.Client after you install ODP.NET Copy and paste the following C# code into your project and replace the relevant info including the query string and you should be able to return data. I have commented several lines of code to assist in understanding what it is doing. Lambda Expression. using System; using System.Data; using Oracle.DataAccess.Client; namespace ConsoleApplication1 { class Program { static void Main(string[] args) { try { //Setup DataSource string oradb = "Data Source=(DESCRIPTION =" + "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))" + "(CONNECT_DATA = (SERVICE_NAME = SERVICENAME))) ;" + "Persist Security Info=True;User ID=USER;Password=PASSWORD;"; //Open Connection to Oracle - this could be moved outside the try. OracleConnection conn = new OracleConnection(oradb); conn.Open(); //Create cmd and use parameters to prevent SQL injection attacks. OracleCommand cmd = new OracleCommand(); cmd.Connection = conn; cmd.CommandText = "select username from table where username = :username"; OracleParameter p1 = new OracleParameter("username", OracleDbType.Varchar2); p1.Value = username; cmd.Parameters.Add(p1); cmd.CommandType = CommandType.Text; OracleDataReader dr = cmd.ExecuteReader(); dr.Read(); //Contains the value of the datarow Console.WriteLine(dr["username"].ToString()); //Disposes of objects. dr.Dispose(); cmd.Dispose(); conn.Dispose(); } catch (OracleException ex) // Catches only Oracle errors { switch (ex.Number) { case 1: Console.WriteLine("Error attempting to insert duplicate data."); break; case 12545: Console.WriteLine("The database is unavailable."); break; default: Console.WriteLine(ex.Message.ToString()); break; } } catch (Exception ex) // Catches any error not previously caught { Console.WriteLine("Unidentified Error: " + ex.Message.ToString()); } } } } At this point, you should have a working Program that returns data from an oracle database. If you are still having trouble then drop me a line and I will be happy to assist. As of this writing, oracle has announced the latest beta release of ODP.NET 11.2.0.1.1 Beta. This release includes .NET Framework 4 and .NET Framework 4 Client Profile support. You may want to hold off on this version for a while as its BETA, and I wouldn’t want any production code using any BETA software.

Read the article

Tyrus 1.8

- by Pavel Bucek

Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

Read the article

Authenticating your windows domain users in the cloud

- by cibrax

Moving to the cloud can represent a big challenge for many organizations when it comes to reusing existing infrastructure. For applications that drive existing business processes in the organization, reusing IT assets like active directory represent good part of that challenge. For example, a new web mobile application that sales representatives can use for interacting with an existing CRM system in the organization. In the case of Windows Azure, the Access Control Service (ACS) already provides some integration with ADFS through WS-Federation. That means any organization can create a new trust relationship between the STS running in the ACS and the STS running in ADFS. As the following image illustrates, the ADFS running in the organization should be somehow exposed out of network boundaries to talk to the ACS. This is usually accomplish through an ADFS proxy running in a DMZ. This is the official story for authenticating existing domain users with the ACS. Getting an ADFS up and running in the organization, which talks to a proxy and also trust the ACS could represent a painful experience. It basically requires advance knowledge of ADSF and exhaustive testing to get everything right. However, if you want to get an infrastructure ready for authenticating your domain users in the cloud in a matter of minutes, you will probably want to take a look at the sample I wrote for talking to an existing Active Directory using a regular WCF service through the Service Bus Relay Binding. You can use the WCF ability for self hosting the authentication service within a any program running in the domain (a Windows service typically). The service will not require opening any port as it is opening an outbound connection to the cloud through the Relay Service. In addition, the service will be protected from being invoked by any unauthorized party with the ACS, which will act as a firewall between any client and the service. In that way, we can get a very safe solution up and running almost immediately. To make the solution even more convenient, I implemented an STS in the cloud that internally invokes the service running on premises for authenticating the users. Any existing web application in the cloud can just establish a trust relationship with this STS, and authenticate the users via WS-Federation passive profile with regular http calls, which makes this very attractive for web mobile for example. This is how the WCF service running on premises looks like, [ServiceBehavior(Namespace = "http://agilesight.com/active_directory/agent")] public class ProxyService : IAuthenticationService { IUserFinder userFinder; IUserAuthenticator userAuthenticator; public ProxyService() : this(new UserFinder(), new UserAuthenticator()) { } public ProxyService(IUserFinder userFinder, IUserAuthenticator userAuthenticator) { this.userFinder = userFinder; this.userAuthenticator = userAuthenticator; } public AuthenticationResponse Authenticate(AuthenticationRequest request) { if (userAuthenticator.Authenticate(request.Username, request.Password)) { return new AuthenticationResponse { Result = true, Attributes = this.userFinder.GetAttributes(request.Username) }; } return new AuthenticationResponse { Result = false }; } } Two external dependencies are used by this service for authenticating users (IUserAuthenticator) and for retrieving user attributes from the user’s directory (IUserFinder). The UserAuthenticator implementation is just a wrapper around the LogonUser Win Api. The UserFinder implementation relies on Directory Services in .NET for searching the user attributes in an existing directory service like Active Directory or the local user store. public UserAttribute[] GetAttributes(string username) { var attributes = new List<UserAttribute>(); var identity = UserPrincipal.FindByIdentity(new PrincipalContext(this.contextType, this.server, this.container), IdentityType.SamAccountName, username); if (identity != null) { var groups = identity.GetGroups(); foreach(var group in groups) { attributes.Add(new UserAttribute { Name = "Group", Value = group.Name }); } if(!string.IsNullOrEmpty(identity.DisplayName)) attributes.Add(new UserAttribute { Name = "DisplayName", Value = identity.DisplayName }); if(!string.IsNullOrEmpty(identity.EmailAddress)) attributes.Add(new UserAttribute { Name = "EmailAddress", Value = identity.EmailAddress }); } return attributes.ToArray(); } As you can see, the code is simple and uses all the existing infrastructure in Azure to simplify a problem that looks very complex at first glance with ADFS. All the source code for this sample is available to download (or change) in this GitHub repository, https://github.com/AgileSight/ActiveDirectoryForCloud

Read the article

Moving monarchs and dragons: migrating the JDK bugs to JIRA

- by darcy

Among insects, monarch butterflies and dragonflies have the longest migrations; migrating JDK bugs involves a long journey as well! As previously announced by Mark back in March, we've been working according to a revised plan to transition the JDK bug management from Sun's legacy system to initially an Oracle-internal JIRA instance which is afterward made visible and usable externally. I've been busily working on this project for the last few months and the team has made good progress on many aspects of the effort: JDK bugs will be imported into JIRA regardless of age; bugs will also be imported regardless of state, including closed bugs. Consequently, the JDK bug project will start pre-populated with over 100,000 existing bugs, some dating all the way back to 1994. This will allow a continuity of information and allow new issues to be linked to old ones. Using a custom import process, the Sun bug numbers will be preserved in JIRA. For example, the Sun bug with bug number 4040458 will become "JDK-4040458" in JIRA. In JIRA the project name, "JDK" in our case, is part of the bug's identifier. Bugs created after the JIRA migration will be numbered starting at 8000000; bugs imported from the legacy system have numbers ranging between 1000000 and 79999999. We're working with the bugs.sun.com team to try to maintain continuity of the ability to both read JDK bug information as well as to file new incidents. At least for now, the overall architecture of bugs.sun.com will be the same as it is today: it will be a gateway bridging to an Oracle-internal system, but the internal system will change to JIRA from the legacy database. Generally we are aiming to preserve the visibility of bugs currently viewable on bugs.sun.com; however, bugs in areas not related to the JDK will not be visible after the transition to JIRA. New incoming incidents will be sent to a separate JIRA project for initial triage before possibly being moved into the JDK project. JDK bug management leans heavily on being able to track the state of bugs in multiple releases, especially to coordinate delivering synchronized security releases (known as CPUs, critital patch updates, in Oracle parlance). For a security release, it is common for half a dozen or more release trains to be affected (for example, JDK 5, JDK 6 update, OpenJDK 6, JDK 7 update, JDK 8, virtual releases for HotSpot express, etc.). We've determined we need to track at least the tuple of (release, responsible engineer/assignee for the release, status in the release) for the release trains a fix is going into. To do this in JIRA, we are creating a separate port/backport issue type along with a custom link type to allow the multiple release information to be easily grouped and presented together. The Sun legacy system had a three-level classification scheme, product, category, and subcategory. Out of the box, JIRA only has a one-level classification, component. We've implemented a custom second-level classification, subcomponent. As part of the bug migration we've taken the opportunity to think about how bugs should be grouped under a two-level system and we'll the new system will be simpler and more regular. The main top-level components of the JDK product will include: core-libs client-libs deploy install security-libs other-libs tools hotspot For the libs areas, the primary name of the subcomportment will be the package of the API in question. In the core-libs component, there will be subcomponents like: java.lang java.lang.class_loading java.math java.util java.util:i18n In the tools component, subcomponents will primarily correspond to command names in $JDK/bin like, jar, javac, and javap. The first several bulk imports of the JDK bugs into JIRA have gone well and we're continuing to refine the import to have greater fidelity to the current data, including by reconstructing information not brought over in a structured fashion during the previous large JDK bug system migration back in 2004. We don't currently have a firm timeline of when the new system will be usable externally, but as it becomes available, I'll share further information in follow-up blog posts.

Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 593/626 | < Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600 | Next Page >

- by Matthew Guay

- by JJ White

- by Riuzaki90

- by DigiMortal

- by mbcrump

- by Most Valuable Yak (Rob Volk)

- by jjg

- by Ramon Suarez

- by Chuchinyi

- by Dave Campbell

- by Roger Brinkley

- by adempewolff

- by back2dos

- by cristiano.toni

- by Jeff Taylor-Oracle

- by Zeynep Koch

- by speakjava

- by Suriani Salleh

- by Tom

- by user12601629

- by mbcrump

- by Pavel Bucek

- by cibrax

- by darcy

< Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600 | Next Page >