Search Results

Search found 93067 results on 3723 pages for 'team foundation server'.

Page 594/3723 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

  • PPTP server stuck at "GRE: Bad checksum from pppd"

    - by user92516
    I am a network engineer having quite limited experience with Ubuntu. I have been following up these online instructions to set up a pptp server but without much luck to get it to work. My server is a vm running an Apple Xserve behind a Cisco firewall. I made sure tcp 1723 and GRE are opened for the box. Below is the syslog output, looks like I always got stuck at GRE: Bad checksum from pppd. I'm running Ubuntu 10.04. Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Reaping child PPP[1232] Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Client 166.137.85.165 control connection finished Sep 24 13:22:41 ubuntu pptpd[1276]: MGR: connections limit (100) reached, extra IP addresses ignored Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Manager process started Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Maximum of 100 connections available Sep 24 13:22:50 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection started Sep 24 13:22:51 ubuntu pptpd[1278]: CTRL: Starting call (launching pppd, opening GRE) Sep 24 13:22:51 ubuntu pppd[1279]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Sep 24 13:22:51 ubuntu pppd[1279]: pppd 2.4.5 started by root, uid 0 Sep 24 13:22:51 ubuntu pppd[1279]: Using interface ppp0 Sep 24 13:22:51 ubuntu pppd[1279]: Connect: ppp0 <--> /dev/pts/1 Sep 24 13:22:51 ubuntu pptpd[1278]: GRE: Bad checksum from pppd. Sep 24 13:23:21 ubuntu pppd[1279]: LCP: timeout sending Config-Requests Sep 24 13:23:21 ubuntu pppd[1279]: Connection terminated. Sep 24 13:23:21 ubuntu pppd[1279]: Modem hangup Sep 24 13:23:21 ubuntu pppd[1279]: Exit. Sep 24 13:23:21 ubuntu pptpd[1278]: GRE: read(fd=6,buffer=805a540,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Reaping child PPP[1279] Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection finished

    Read the article

  • Pure Server-Side Filtering with RadGridView and WCF RIA Services

    Those of you who are familiar with WCF RIA Services know that the DomainDataSource control provides a FilterDescriptors collection that enables you to filter data returned by the query on the server. We have been using this DomainDataSource feature in our RIA Services with DomainDataSource online example for almost an year now. In the example, we are listening for RadGridViews Filtering event in order to intercept any filtering that is performed on the client and translate it to something that the DomainDataSource will understand, in this case a System.Windows.Data.FilterDescriptor being added or removed from its FilterDescriptors collection. Think of RadGridView.FilterDescriptors as client-side filtering and of DomainDataSource.FilterDescriptors as server-side filtering. We no longer need the client-side one. With the introduction of the Custom Filtering Controls feature many new possibilities have opened. With these custom controls we no longer need to do any filtering on the client. I have prepared a very small project that demonstrates how to filter solely on the server by using a custom filtering control. As I have already mentioned filtering on the server is done through the FilterDescriptors collection of the DomainDataSource control. This collection holds instances of type System.Windows.Data.FilterDescriptor. The FilterDescriptor has three important properties: PropertyPath: Specifies the name of the property that we want to filter on (the left operand). Operator: Specifies the type of comparison to use when filtering. An instance of FilterOperator Enumeration. Value: The value to compare with (the right operand). An instance of the Parameter Class. By adding filters, you can specify that only entities which meet the condition in the filter are loaded from the domain context. In case you are not familiar with these concepts you might find Brad Abrams blog interesting. Now, our requirements are to create some kind of UI that will manipulate the DomainDataSource.FilterDescriptors collection. When it comes to collections, my first choice of course would be RadGridView. If you are not familiar with the Custom Filtering Controls concept I would strongly recommend getting acquainted with my step-by-step tutorial Custom Filtering with RadGridView for Silverlight and checking the online example out. I have created a simple custom filtering control that contains a RadGridView and several buttons. This control is aware of the DomainDataSource instance, since it is operating on its FilterDescriptors collection. In fact, the RadGridView that is inside it is bound to this collection. In order to display filters that are relevant for the current column only, I have applied a filter to the grid. This filter is a Telerik.Windows.Data.FilterDescriptor and is used to filter the little grid inside the custom control. It should not be confused with the DomainDataSource.FilterDescriptors collection that RadGridView is actually bound to. These are the RIA filters. Additionally, I have added several other features. For example, if you have specified a DataFormatString on your original column, the Value column inside the custom control will pick it up and format the filter values accordingly. Also, I have transferred the data type of the column that you are filtering to the Value column of the custom control. This will help the little RadGridView determine what kind of editor to show up when you begin edit, for example a date picker for DateTime columns. Finally, I have added four buttons two of them can be used to add or remove filters and the other two will communicate the changes you have made to the server. Here is the full source code of the DomainDataSourceFilteringControl. The XAML: <UserControl x:Class="PureServerSideFiltering.DomainDataSourceFilteringControl"    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:telerikGrid="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.GridView"     xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"     Width="300">     <Border x:Name="LayoutRoot"             BorderThickness="1"             BorderBrush="#FF8A929E"             Padding="5"             Background="#FFDFE2E5">           <Grid>             <Grid.RowDefinitions>                 <RowDefinition Height="Auto"/>                 <RowDefinition Height="150"/>                 <RowDefinition Height="Auto"/>             </Grid.RowDefinitions>               <StackPanel Grid.Row="0"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="addFilterButton"                                   Click="OnAddFilterButtonClick"                                   Content="Add Filter"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="removeFilterButton"                                   Click="OnRemoveFilterButtonClick"                                   Content="Remove Filter"                                   Margin="2"                                   Width="96"/>             </StackPanel>               <telerikGrid:RadGridView Name="filtersGrid"                                     Grid.Row="1"                                     Margin="2"                                     ItemsSource="{Binding FilterDescriptors}"                                     AddingNewDataItem="OnFilterGridAddingNewDataItem"                                     ColumnWidth="*"                                     ShowGroupPanel="False"                                     AutoGenerateColumns="False"                                     CanUserResizeColumns="False"                                     CanUserReorderColumns="False"                                     CanUserFreezeColumns="False"                                     RowIndicatorVisibility="Collapsed"                                     IsFilteringAllowed="False"                                     CanUserSortColumns="False">                 <telerikGrid:RadGridView.Columns>                     <telerikGrid:GridViewComboBoxColumn DataMemberBinding="{Binding Operator}"                                                         UniqueName="Operator"/>                     <telerikGrid:GridViewDataColumn Header="Value"                                                     DataMemberBinding="{Binding Value.Value}"                                                     UniqueName="Value"/>                 </telerikGrid:RadGridView.Columns>             </telerikGrid:RadGridView>               <StackPanel Grid.Row="2"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="filterButton"                                   Click="OnApplyFiltersButtonClick"                                   Content="Apply Filters"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="clearButton"                                   Click="OnClearFiltersButtonClick"                                   Content="Clear Filters"                                   Margin="2"                                   Width="96"/>             </StackPanel>           </Grid>       </Border> </UserControl>   And the code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using Telerik.Windows.Controls.GridView; using System.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Data;   namespace PureServerSideFiltering {     /// <summary>     /// A custom filtering control capable of filtering purely server-side.     /// </summary>     public partial class DomainDataSourceFilteringControl : UserControl, IFilteringControl     {         // The main player here.         DomainDataSource domainDataSource;           // This is the name of the property that this column displays.         private string dataMemberName;           // This is the type of the property that this column displays.         private Type dataMemberType;           /// <summary>         /// Identifies the <see cref="IsActive"/> dependency property.         /// </summary>         /// <remarks>         /// The state of the filtering funnel (i.e. full or empty) is bound to this property.         /// </remarks>         public static readonly DependencyProperty IsActiveProperty =             DependencyProperty.Register(                 "IsActive",                 typeof(bool),                 typeof(DomainDataSourceFilteringControl),                 new PropertyMetadata(false));           /// <summary>         /// Gets or sets a value indicating whether the filtering is active.         /// </summary>         /// <remarks>         /// Set this to true if you want to lit-up the filtering funnel.         /// </remarks>         public bool IsActive         {             get { return (bool)GetValue(IsActiveProperty); }             set { SetValue(IsActiveProperty, value); }         }           /// <summary>         /// Gets or sets the domain data source.         /// We need this in order to work on its FilterDescriptors collection.         /// </summary>         /// <value>The domain data source.</value>         public DomainDataSource DomainDataSource         {             get { return this.domainDataSource; }             set { this.domainDataSource = value; }         }           public System.Windows.Data.FilterDescriptorCollection FilterDescriptors         {             get { return this.DomainDataSource.FilterDescriptors; }         }           public DomainDataSourceFilteringControl()         {             InitializeComponent();         }           public void Prepare(GridViewBoundColumnBase column)         {             this.LayoutRoot.DataContext = this;               if (this.DomainDataSource == null)             {                 // Sorry, but we need a DomainDataSource. Can't do anything without it.                 return;             }               // This is the name of the property that this column displays.             this.dataMemberName = column.GetDataMemberName();               // This is the type of the property that this column displays.             // We need this in order to see which FilterOperators to feed to the combo-box column.             this.dataMemberType = column.DataType;               // We will use our magic Type extension method to see which operators are applicable for             // this data type. You can go to the extension method body and see what it does.             ((GridViewComboBoxColumn)this.filtersGrid.Columns["Operator"]).ItemsSource                 = this.dataMemberType.ApplicableFilterOperators();               // This is very nice as well. We will tell the Value column its data type. In this way             // RadGridView will pick up the best editor according to the data type. For example,             // if the data type of the value is DateTime, you will be editing it with a DatePicker.             // Nice!             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataType = this.dataMemberType;               // Yet another nice feature. We will transfer the original DataFormatString (if any) to             // the Value column. In this way if you have specified a DataFormatString for the original             // column, you will see all filter values formatted accordingly.             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataFormatString = column.DataFormatString;               // This is important. Since our little filtersGrid will be bound to the entire collection             // of this.domainDataSource.FilterDescriptors, we need to set a Telerik filter on the             // grid so that it will display FilterDescriptor which are relevane to this column ONLY!             Telerik.Windows.Data.FilterDescriptor columnFilter = new Telerik.Windows.Data.FilterDescriptor("PropertyPath"                 , Telerik.Windows.Data.FilterOperator.IsEqualTo                 , this.dataMemberName);             this.filtersGrid.FilterDescriptors.Add(columnFilter);               // We want to listen for this in order to activate and de-activate the UI funnel.             this.filtersGrid.Items.CollectionChanged += this.OnFilterGridItemsCollectionChanged;         }           /// <summary>         // Since the DomainDataSource is a little bit picky about adding uninitialized FilterDescriptors         // to its collection, we will prepare each new instance with some default values and then         // the user can change them later. Go to the event handler to see how we do this.         /// </summary>         void OnFilterGridAddingNewDataItem(object sender, GridViewAddingNewEventArgs e)         {             // We need to initialize the new instance with some values and let the user go on from here.             System.Windows.Data.FilterDescriptor newFilter = new System.Windows.Data.FilterDescriptor();               // This is a must. It should know what member it is filtering on.             newFilter.PropertyPath = this.dataMemberName;               // Initialize it with one of the allowed operators.             // TypeExtensions.ApplicableFilterOperators method for more info.             newFilter.Operator = this.dataMemberType.ApplicableFilterOperators().First();               if (this.dataMemberType == typeof(DateTime))             {                 newFilter.Value.Value = DateTime.Now;             }             else if (this.dataMemberType == typeof(string))             {                 newFilter.Value.Value = "<enter text>";             }             else if (this.dataMemberType.IsValueType)             {                 // We need something non-null for all value types.                 newFilter.Value.Value = Activator.CreateInstance(this.dataMemberType);             }               // Let the user edit the new filter any way he/she likes.             e.NewObject = newFilter;         }           void OnFilterGridItemsCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e)         {             // We are active only if we have any filters define. In this case the filtering funnel will lit-up.             this.IsActive = this.filtersGrid.Items.Count > 0;         }           private void OnApplyFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // Since this.domainDataSource.AutoLoad is false, this will take into             // account all filtering changes that the user has made since the last             // Load() and pull the new data to the client.             this.DomainDataSource.Load();         }           private void OnClearFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // We want to remove ONLY those filters from the DomainDataSource             // that this control is responsible for.             this.DomainDataSource.FilterDescriptors                 .Where(fd => fd.PropertyPath == this.dataMemberName) // Only "our" filters.                 .ToList()                 .ForEach(fd => this.DomainDataSource.FilterDescriptors.Remove(fd)); // Bye-bye!               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // After we did our housekeeping, get the new data to the client.             this.DomainDataSource.Load();         }           private void OnAddFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Let the user enter his/or her requirements for a new filter.             this.filtersGrid.BeginInsert();             this.filtersGrid.UpdateLayout();         }           private void OnRemoveFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Find the currently selected filter and destroy it.             System.Windows.Data.FilterDescriptor filterToRemove = this.filtersGrid.SelectedItem as System.Windows.Data.FilterDescriptor;             if (filterToRemove != null                 && this.DomainDataSource.FilterDescriptors.Contains(filterToRemove))             {                 this.DomainDataSource.FilterDescriptors.Remove(filterToRemove);             }         }           private void ClosePopup()         {             System.Windows.Controls.Primitives.Popup popup = this.ParentOfType<System.Windows.Controls.Primitives.Popup>();             if (popup != null)             {                 popup.IsOpen = false;             }         }     } }   Finally, we need to tell RadGridViews Columns to use this custom control instead of the default one. Here is how to do it: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Data; using Telerik.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Controls.GridView;   namespace PureServerSideFiltering {     public partial class MainPage : UserControl     {         public MainPage()         {             InitializeComponent();             this.grid.AutoGeneratingColumn += this.OnGridAutoGeneratingColumn;               // Uncomment this if you want the DomainDataSource to start pre-filtered.             // You will notice how our custom filtering controls will correctly read this information,             // populate their UI with the respective filters and lit-up the funnel to indicate that             // filtering is active. Go ahead and try it.             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("Title", System.Windows.Data.FilterOperator.Contains, "Assistant"));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsGreaterThan, new DateTime(1998, 12, 31)));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsLessThanOrEqualTo, new DateTime(1999, 12, 31)));               this.employeesDataSource.Load();         }           /// <summary>         /// First of all, we will need to replace the default filtering control         /// of each column with out custom filtering control DomainDataSourceFilteringControl         /// </summary>         private void OnGridAutoGeneratingColumn(object sender, GridViewAutoGeneratingColumnEventArgs e)         {             GridViewBoundColumnBase dataColumn = e.Column as GridViewBoundColumnBase;             if (dataColumn != null)             {                 // We do not like ugly dates.                 if (dataColumn.DataType == typeof(DateTime))                 {                     dataColumn.DataFormatString = "{0:d}"; // Short date pattern.                       // Notice how this format will be later transferred to the Value column                     // of the grid that we have inside the DomainDataSourceFilteringControl.                 }                   // Replace the default filtering control with our.                 dataColumn.FilteringControl = new DomainDataSourceFilteringControl()                 {                     // Let the control know about the DDS, after all it will work directly on it.                     DomainDataSource = this.employeesDataSource                 };                   // Finally, lit-up the filtering funnel through the IsActive dependency property                 // in case there are some filters on the DDS that match our column member.                 string dataMemberName = dataColumn.GetDataMemberName();                 dataColumn.FilteringControl.IsActive =                     this.employeesDataSource.FilterDescriptors                     .Where(fd => fd.PropertyPath == dataMemberName)                     .Count() > 0;             }         }     } } The best part is that we are not only writing filters for the DomainDataSource we can read and load them. If the DomainDataSource has some pre-existing filters (like I have created in the code above), our control will read them and will populate its UI accordingly. Even the filtering funnel will light-up! Remember, the funnel is controlled by the IsActive property of our control. While this is just a basic implementation, the source code is absolutely yours and you can take it from here and extend it to match your specific business requirements. Below the main grid there is another debug grid. With its help you can monitor what filter descriptors are added and removed to the domain data source. Download Source Code. (You will have to have the AdventureWorks sample database installed on the default SQLExpress instance in order to run it.) Enjoy!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • OBIEE 11.1.1 - Disable Wrap Data Types in WebLogic Server 10.3.x

    - by Ahmed Awan
    By default, JDBC data type’s objects are wrapped with a WebLogic wrapper. This allows for features like debugging output and track connection usage to be done by the server. The wrapping can be turned off by setting this value to false. This improves performance, in some cases significantly, and allows for the application to use the native driver objects directly. Tip: How to Disable Wrapping in WLS Administration Console You can use the Administration Console to disable data type wrapping for following JDBC data sources in bifoundation_domain domain: Data Source Name bip_datasource mds-owsm EPMSystemRegistry   To disable wrapping for each JDBC data source (as stated in above table): 1.     If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit. 2.     In the Domain Structure tree, expand Services, then select Data Sources. 3.     On the Summary of Data Sources page, click the data source name for example “mds-owsm”. 4.     Select the Configuration: Connection Pool tab. 5.     Scroll down and click Advanced to show the advanced connection pool options. 6.     In Wrap Data Types, deselect the checkbox to disable wrapping. 7.     Click Save. 8.     To activate these changes, in the Change Center of the Administration Console, click Activate Changes. Important Note: This change does not take effect immediately—it requires the server be restarted.

    Read the article

  • .htaccess file size causes 500 Internal Server Error

    - by moobot
    As soon as my .htaccess goes over approx 8410 bytes, I get a 500 Internal Server Error. I don't think this is due to a bad redirect, as I have experimented with redirects in the .htaccess and then with just text that is commented out #. (no actual commands in the .htaccess file) Is there anything obvious that can cause this? Update: The site is on WordPress. Here are the redirects I was originally trying to add: RewriteEngine On ## 301 Redirects of old URLs to new # 301 Redirect 1 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^accesseries/underlay/prod_37\.html$ /product-category/accessories/underlays? [R=301,NE,NC,L] # 301 Redirect 2 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^accessories/acoustic-underlay/prod_29\.html$ /product/acoustic-underlay/? [R=301,NE,NC,L] # 301 Redirect 3 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^accessories/cat_4\.html$ /product-category/accessories/? [R=301,NE,NC,L] # 301 Redirect 4 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/accessories/cat_8\.html$ /product-category/accessories/? [R=301,NE,NC,L] # 301 Redirect 5 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/bamboo-floor/natural-strandwoven-bamboo-semi-gloss-wide-board-135mm-click/prod_151\.html$ /product/natural-strand-woven-bamboo-semi-gloss-wide-board-135mm-click/? [R=301,NE,NC,L] # 301 Redirect 6 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/bamboo-floor/strandwoven-chocolate-135mm-bamboo-flooring/prod_174\.html$ /product/strand-woven-chocolate-135mm-bamboo-flooring/? [R=301,NE,NC,L] # 301 Redirect 7 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/bamboo-floor/strand-woven-kempas-bamboo-flooring/prod_173\.html$ /product/strand-woven-kempas-bamboo-flooring/? [R=301,NE,NC,L] # 301 Redirect 8 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/bamboo-floor/strandwoven-walnut-wired-135mm-bamboo-flooring/prod_176\.html$ /product/strand-woven-walnut-wired-135mm-bamboo-flooring/? [R=301,NE,NC,L] # 301 Redirect 9 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-flooring/cat_7\.html$ /product-category/bamboo-floor/? [R=301,NE,NC,L] # 301 Redirect 10 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-bamboo-installation/info_8\.html$ /bamboo-installation/? [R=301,NE,NC,L] # 301 Redirect 11 RewriteCond %{QUERY_STRING} ^act=cart$ [NC] RewriteRule ^cart\.php$ /cart/? [R=301,NE,NC,L] # 301 Redirect 12 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^contact-us/info_2\.html$ /contact-us/? [R=301,NE,NC,L] # 301 Redirect 13 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^faqs/info_9\.html$ /faqs/? [R=301,NE,NC,L] # 301 Redirect 14 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-floating-timber-floor/black-butt-engineered-floating-timber/prod_213\.html$ /product/black-butt-engineered-floating-timber/? [R=301,NE,NC,L] # 301 Redirect 15 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-floating-timber-floor/doussie-engineered-floating-timber/prod_208\.html$ /product/doussie-engineered-floating-timber/? [R=301,NE,NC,L] # 301 Redirect 16 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-floating-timber-floor/smoked-oak-engineered-floating-timber/prod_217\.html$ /product/smoked-oak-engineered-floating-timber/? [R=301,NE,NC,L] # 301 Redirect 17 RewriteCond %{QUERY_STRING} ^act=thanks$ [NC] RewriteRule ^index\.php$ http://www.xxxxxxxxxx.com/? [R=301,NE,NC,L] # 301 Redirect 18 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=13$ [NC] RewriteRule ^index\.php$ /product-category/samples/bamboo-flooring-samples/? [R=301,NE,NC,L] # 301 Redirect 19 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=18$ [NC] RewriteRule ^index\.php$ /product/bamboo-plastic-composite/? [R=301,NE,NC,L] # 301 Redirect 20 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=2$ [NC] RewriteRule ^index\.php$ /product-category/bamboo-floor/? [R=301,NE,NC,L] # 301 Redirect 21 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=20$ [NC] RewriteRule ^index\.php$ /products/? [R=301,NE,NC,L] # 301 Redirect 22 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=3$ [NC] RewriteRule ^index\.php$ /product-category/floating-timber-floor/? [R=301,NE,NC,L] # 301 Redirect 23 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=5$ [NC] RewriteRule ^index\.php$ /product-category/laminate-flooring/? [R=301,NE,NC,L] # 301 Redirect 24 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=6$ [NC] RewriteRule ^index\.php$ /product-category/accessories/? [R=301,NE,NC,L] # 301 Redirect 25 RewriteCond %{QUERY_STRING} ^act=viewCat&catId=saleItems$ [NC] RewriteRule ^index\.php$ /product-category/clearance-sale/? [R=301,NE,NC,L] # 301 Redirect 26 RewriteCond %{QUERY_STRING} ^act=viewDoc&docId=3$ [NC] RewriteRule ^index\.php$ /faqs/? [R=301,NE,NC,L] # 301 Redirect 27 RewriteCond %{QUERY_STRING} ^act=viewDoc&docId=4$ [NC] RewriteRule ^index\.php$ /faqs/? [R=301,NE,NC,L] # 301 Redirect 28 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=137$ [NC] RewriteRule ^index\.php$ /product/laminate-flooring-goustein-wood/? [R=301,NE,NC,L] # 301 Redirect 29 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=164$ [NC] RewriteRule ^index\.php$ /product/modern-black-brushed-finish-strand-woven-flooring/? [R=301,NE,NC,L] # 301 Redirect 30 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=165$ [NC] RewriteRule ^index\.php$ /product/lime-wash-strand-woven-bamboo-flooring/? [R=301,NE,NC,L] # 301 Redirect 31 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=168$ [NC] RewriteRule ^index\.php$ /product/country-bark/? [R=301,NE,NC,L] # 301 Redirect 32 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=173$ [NC] RewriteRule ^index\.php$ /product-category/bamboo-floor/14mm-bamboo-flooring/? [R=301,NE,NC,L] # 301 Redirect 33 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=178$ [NC] RewriteRule ^index\.php$ /product/blue-gum-136-floating-timber/? [R=301,NE,NC,L] # 301 Redirect 34 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=199$ [NC] RewriteRule ^index\.php$ /product/jarrah-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 35 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=205$ [NC] RewriteRule ^index\.php$ /product/elm-12mm-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 36 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=209$ [NC] RewriteRule ^index\.php$ /product/iroko-engineered-floating-timber/? [R=301,NE,NC,L] # 301 Redirect 37 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=222$ [NC] RewriteRule ^index\.php$ /product/european-oak-engineered-floating-timber-sample/? [R=301,NE,NC,L] # 301 Redirect 38 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=236$ [NC] RewriteRule ^index\.php$ /product/black-forest-5mm-vinyl-flooring/? [R=301,NE,NC,L] # 301 Redirect 39 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=65$ [NC] RewriteRule ^index\.php$ /product/stair-nose/? [R=301,NE,NC,L] # 301 Redirect 40 RewriteCond %{QUERY_STRING} ^act=viewProd&productId=83$ [NC] RewriteRule ^index\.php$ /product/laminate-flooring-warm-teak/? [R=301,NE,NC,L] # 301 Redirect 41 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/12mm-laminate-flooring/blackbutt/prod_156\.html$ /product/blackbutt-12mm-laminate-floor/? [R=301,NE,NC,L] # 301 Redirect 42 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/12mm-laminate-flooring/tasmanian-oak/prod_171\.html$ /product/tasmanian-oak/? [R=301,NE,NC,L] # 301 Redirect 43 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/8-3mm-laminate-flooring/laminate-flooring-warm-teak/prod_8\.html$ /product/laminate-flooring-warm-teak/? [R=301,NE,NC,L] # 301 Redirect 44 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/accessories/cat_6\.html$ /product-category/accessories/? [R=301,NE,NC,L] # 301 Redirect 45 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/cat_5\.html$ /product-category/laminate-flooring/? [R=301,NE,NC,L] # 301 Redirect 46 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-flooring/country-classic-12mm-laminate/cat_19\.html$ /product-category/laminate-flooring/12mm-country-classic-laminate-floor/? [R=301,NE,NC,L] # 301 Redirect 47 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-laminate-installation/info_7\.html$ /laminate-installation/? [R=301,NE,NC,L] # 301 Redirect 48 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^privacy-policy/info_4\.html$ /faqs/? [R=301,NE,NC,L] # 301 Redirect 49 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^-quotation-request/info_5\.html$ /quotation-request/? [R=301,NE,NC,L] # 301 Redirect 50 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^rainbow-flooring/cat_16\.html$ /product-category/rainbow-flooring/? [R=301,NE,NC,L] # 301 Redirect 51 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^rainbow-flooring/walnut-rainbow-flooring/prod_112\.html$ /product/walnut-rainbow-flooring/? [R=301,NE,NC,L] # 301 Redirect 52 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/12mm-laminate-floor-samples/kempas-laminate-floor-sample/prod_195\.html$ /product/kempas-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 53 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/12mm-laminate-floor-samples/spotted-gum-laminate-floor-sample/prod_196\.html$ /product/spotted-gum-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 54 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/12mm-laminate-floor-samples/tasmanian-oak-laminate-floor-sample/prod_197\.html$ /product/tasmanian-oak-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 55 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/bamboo-flooring-samples/cat_13\.html$ /product-category/samples/bamboo-flooring-samples/? [R=301,NE,NC,L] # 301 Redirect 56 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/bamboo-flooring-samples/rosewood-strandwoven-bamboo-floor-135mm-click-sample/prod_191\.html$ /product/rosewood-strand-woven-bamboo-floor-135mm-click-sample/? [R=301,NE,NC,L] # 301 Redirect 57 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/cat_9\.html$ /samples/? [R=301,NE,NC,L] # 301 Redirect 58 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/floating-timber-floor-samples/iroko-engineered-floating-timber-floor-sample/prod_223\.html$ /product/iroko-engineered-floating-timber-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 59 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/floating-timber-floor-samples/jarrah-engineered-floating-timber-sample/prod_224\.html$ /product/jarrah-engineered-floating-timber-sample/? [R=301,NE,NC,L] # 301 Redirect 60 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/floating-timber-floor-samples/merbau-engineered-floating-timber-sample/prod_226\.html$ /product/merbau-engineered-floating-timber-sample/? [R=301,NE,NC,L] # 301 Redirect 61 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/floating-timber-floor-samples/spotted-gum-engineered-floating-timber-sample/prod_228\.html$ /product/spotted-gum-engineered-floating-timber-sample/? [R=301,NE,NC,L] # 301 Redirect 62 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^samples/floating-timber-floor-samples/sydney-blue-gum-engineered-floating-timber-sample/prod_220\.html$ /product/sydney-blue-gum-engineered-floating-timber-sample/? [R=301,NE,NC,L] # 301 Redirect 63 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/-laminate-flooring/accessories/laminate-flooring-accessories-click-stairnose/prod_251\.html$ /product/stair-nose/? [R=301,NE,NC,L] # 301 Redirect 64 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/-laminate-flooring/country-classic-12mm-laminate/country-classic-polar-white/prod_243\.html$ /product/country-classic-polar-white/? [R=301,NE,NC,L] # 301 Redirect 65 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/samples/12mm-laminate-floor-samples/country-classic-polar-white/prod_244\.html$ /product/country-classic-polar-white-sample/? [R=301,NE,NC,L] # 301 Redirect 66 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/samples/12mm-laminate-floor-samples/rustic-oak-12mm-laminate-floor/prod_248\.html$ /product/rustic-oak-12mm-laminate-floor-sample/? [R=301,NE,NC,L] # 301 Redirect 67 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/samples/vinyl-flooring-samples/cat_25\.html$ /product-category/samples/vinyl-flooring-samples/? [R=301,NE,NC,L] # 301 Redirect 68 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^shop\.php/vinyl-flooring/cat_24\.html$ /product-category/vinyl-floor/? [R=301,NE,NC,L] # 301 Redirect 69 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^solardeck-tiles/cat_22\.html$ /product-category/solardeck-tiles/? [R=301,NE,NC,L] # 301 Redirect 70 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^solardeck-tiles/solardeck-tiles/prod_206\.html$ /product/solardeck-tiles/? [R=301,NE,NC,L] # 301 Redirect 71 RewriteCond %{QUERY_STRING} ^$ RewriteRule ^terms-conditions/info_3\.html$ /faqs/? [R=301,NE,NC,L] I'm getting errors like this in my log: Invalid command 'aminate-flooring/tasmanian-oak/prod_171\\.html$', perhaps misspelled or defined by a module not included in the server configuration, referer: http://www.xxxxxxxx.com/laminate-installation/ Invalid command ',NE,NC,L]', perhaps misspelled or defined by a module not included in the server configuration Invalid command ',L]#', perhaps misspelled or defined by a module not included in the server configuration

    Read the article

  • PASS Summit book launch and meet the authors - Professional SQL Server 2012 Internals & Troubleshooting

    - by Christian
    I’m very pleased to announce that we’ll be officially launching our new book, Professional SQL Server 2012 Internals and Troubleshooting at the PASS Summit in Seattle tomorrow. In partnership with our great friends at SQL Sentry we’ll have most of the authors at the SQL Sentry exhibitors stand from 12:30 on Thursday 8th November for a book signing event which will give you a rare opportunity to meet with the authors and contributors, many of which have flown in from around the world. SQL Sentry also have lots and lots of copies to give away for free so be sure to drop by their stand and ask about it! If you really can’t wait or run the risk of not getting a copy then the PASS bookstore has a few copies for sale but don’t expect them to be there for long! You can also order it from your favourite online retailer: amazon.com: http://amzn.to/U9IlPV barnesandnoble.com: http://bitly.com/Ux1gog amazon.co.uk: http://bitly.com/WBJ18l I’ll be writing a follow-up post very soon explaining why I think you should buy this book so look out for it!   Christian Bolton - MCA, MCM, MVP Technical Director http://coeo.com - SQL Server Consulting & Managed Services

    Read the article

  • Automated “ubuntu-12.04.1-server-amd64” OS installation on physical machine

    - by user285336
    We are using Physical server and are in process of Automated “ubuntu-12.04.1-server-amd64” OS installation on it. There are two HDD for OS installation purpose and there are RAID1 relation between them. This setup has been done through BIOS. The kickstart configuration file looks like this: #Generated by Kickstart Configurator #platform=AMD64 or Intel EM64T #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard us #System mouse mouse #System timezone timezone Asia/Dili #Root password rootpw --iscrypted $1$Yl1QJyta$KzIT.kq3i9E5XaiQKcUJn/ #Initial user user ankit --fullname "Ankit" --iscrypted --password $1$c6Yflpea$pi1QQ59/jgywmGwBv25z3/ #Reboot after installation reboot #Use text mode install text #Install OS instead of upgrade install #Use Web installation url --url my_repo_location #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --fstype ext4 --size 100 --ondisk sda part / --fstype ext4 --size 10000 --ondisk sda part /var --fstype ext4 --size 10000 --ondisk sda part swap --size 1024 --ondisk sdb #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 #Firewall configuration firewall --enabled --trust=eth0 --http --ftp --ssh --telnet --smtp #X Window System configuration information xconfig --depth=8 --resolution=640x480 --defaultdesktop=GNOME But I am getting the below error : No root file system is defined Please suggest on this. Do we need to do any modification in kickstart configuration file. Any help in this regard will be very helpful for us. The automated Ubuntu OS installation is successful in Virtual Machine(VM) with the above ks.cfg (kickstart configuration file ) but failing in case of physical machine. Please suggest on this and if possible provide the new ks.cfg file to resolve above problem. Thanks & Regards, Rajesh Prasad

    Read the article

  • Disaster Recovery Plan&ndash;Rebuild System Disk (Dell Server 2900 with PERC RAID controller)

    - by Jim Lahman
    Goal: Since the system disk is a RAID 1 mirrored set, we can rebuild the shadow set by replacing one of the good sets with a blank disk Steps Shutdown and power down server Remove the disk from bay 9, which is part of the system shadow set. Put this disk on the shelf Insert blank/old disk into the empty bay     Label the new disk before inserting it into the empty bay       Power up server During the booting process, the following message appears: “Some configured disks have been removed from your system…”       Press ‘C’ to Load Configuration utility             Press 'Y' to confirm to load the foreign configuration       In this example, the system shadow set is Disk Group 2.  (Before proceeding, confirm this is the disk group in your case).  Expanding the physical disks shows a disk in bay 8 and a missing disk in bay 9.  This is correct.   Now, we have to include the new inserted disk in this group       RAID controller reporting bay 9 is empty       There may be times when the new disk is seen as a foreign disk.  In this case, do the following:     Foreign disk is reported in bay 9 CTRL-N (Next Page) to Foreign Mgt All the disk groups will be displayed.  Typically, the disk group containing the foreign disk will be grey.  To remove the foreign disk Highlight Controller Press F2 Select Foreign Select Clear (do NOT import the configuration!)       Clear the foreign configuration Now the disk can be brought into the system shadow set disk group as a hot spare   To include the newly inserted disk into the system shadowset disk group, it must be brought in as a hot spare Highlight Disk Group 2 (VD Management) Hit F2 Select 'Manage Ded. HS'     Manage dedicated hot swap Select the disk in bay 9 (Hit space bar to select) Tab to 'OK'.  Hit the return key     Select hot spare to bring into RAID 1 mirror set   Rebuild automatically commences     Rebuild in process   Restart now or restart after rebuild is completed

    Read the article

  • How to Configure OpenLDAP on Ubuntu 10.04 Server

    - by user3215
    I am following the Ubuntu server guide to configure OpenLDAP on an Ubuntu 10.04 server, but can not get it to work. When I try to use sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif I'm getting the following error: Enter LDAP Password: <entered 'secret' as password> adding new entry "dc=don,dc=com" ldap_add: Naming violation (64) additional info: value of single-valued naming attribute 'dc' conflicts with value present in entry Again when I try to do the same, I'm getting the following error: root@avy-desktop:/home/avy# sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Here is the backend.ldif file: # Load dynamic backend modules dn: cn=module,cn=config objectClass: olcModuleList cn: module olcModulepath: /usr/lib/ldap olcModuleload: back_hdb # Database settings dn: olcDatabase=hdb,cn=config objectClass: olcDatabaseConfig objectClass: olcHdbConfig olcDatabase: {1}hdb olcSuffix: dc=don,dc=com olcDbDirectory: /var/lib/ldap olcRootDN: cn=admin,dc=don,dc=com olcRootPW: secret olcDbConfig: set_cachesize 0 2097152 0 olcDbConfig: set_lk_max_objects 1500 olcDbConfig: set_lk_max_locks 1500 olcDbConfig: set_lk_max_lockers 1500 olcDbIndex: objectClass eq olcLastMod: TRUE olcDbCheckpoint: 512 30 olcAccess: to attrs=userPassword by dn="cn=admin,dc=don,dc=com" write by anonymous auth by self write by * none olcAccess: to attrs=shadowLastChange by self write by * read olcAccess: to dn.base="" by * read olcAccess: to * by dn="cn=admin,dc=don,dc=com" write by * read frontend.ldif file: # Create top-level object in domain dn: dc=don,dc=com objectClass: top objectClass: dcObject objectclass: organization o: Example Organization dc: Example description: LDAP Example # Admin user. dn: cn=admin,dc=don,dc=com objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator userPassword: secret dn: ou=people,dc=don,dc=com objectClass: organizationalUnit ou: people dn: ou=groups,dc=don,dc=com objectClass: organizationalUnit ou: groups dn: uid=john,ou=people,dc=don,dc=com objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uid: john sn: Doe givenName: John cn: John Doe displayName: John Doe uidNumber: 1000 gidNumber: 10000 userPassword: password gecos: John Doe loginShell: /bin/bash homeDirectory: /home/john shadowExpire: -1 shadowFlag: 0 shadowWarning: 7 shadowMin: 8 shadowMax: 999999 shadowLastChange: 10877 mail: [email protected] postalCode: 31000 l: Toulouse o: Example mobile: +33 (0)6 xx xx xx xx homePhone: +33 (0)5 xx xx xx xx title: System Administrator postalAddress: initials: JD dn: cn=example,ou=groups,dc=don,dc=com objectClass: posixGroup cn: example gidNumber: 10000 Can anyone help me?

    Read the article

  • How to speed up file transfer to/from Ubuntu Server 11.10 (wifi)

    - by Alexander
    I've been searching AU & elsewhere for the last day and a half. Haven't found an answer so I joined AU to ask for help. I'm hoping someone can point me in the right direction. Ubuntu Server 11.10 Samba VSFTPD Windows 7 PC 2 MacBook Pro - Snow Leopard/Lion 1 iMac - Lion Wireless LAN using DLink DIR-655 Link Speed: 195 Mbit/s on Mac - 54Mbps on Windows ISP Connection: Cable - 20 down/3 up No Domain Controller. All machines are members of the same workgroup. No matter how I connect I can't get better than about 700K transfer rate up/down. Mac/PC, SMB/ftp, Domain Name/Local IP I've tried different user accounts and using different folders, different volumes on the server. Nothing seems to make a difference. 700K up/down. Period. Any suggestions would be greatly appreciated. Thanks, Alexander EDIT: Using sftp now and uploading seems to peak at 980k. After about 5 minutes into a 650MB file, downloading is at 1072k and climbing about 500b/s every ten seconds. If any of that matters... I was expecting a lot faster than 1Mb tx rate. Am I off base here? EDIT: From all I've read so far, perhaps the speed isn't that bad. I only installed Ubuntu out of boredom this past weekend. The trouble is, I like it. Guess it's time to ditch the wifi and run some Cat 5.

    Read the article

  • Connect to localdb using Sql Server management studio

    - by Magnus Karlsson
    I was trying to find my databse for local db under localhost etc but no luck. The following led me to just connect to it, kind of obvious really when you look at your connections string but.. its sunday morning or something.. From: http://blogs.msdn.com/b/sqlexpress/archive/2011/07/12/introducing-localdb-a-better-sql-express.aspx High-Level Overview After the lengthy introduction it's time to take a look at LocalDB from the technical side. At a very high level, LocalDB has the following key properties: LocalDB uses the same sqlservr.exe as the regular SQL Express and other editions of SQL Server. The application is using the same client-side providers (ADO.NET, ODBC, PDO and others) to connect to it and operates on data using the same T-SQL language as provided by SQL Express. LocalDB is installed once on a machine (per major SQL Server version). Multiple applications can start multiple LocalDB processes, but they are all started from the same sqlservr.exe executable file from the same disk location. LocalDB doesn't create any database services; LocalDB processes are started and stopped automatically when needed. The application is just connecting to "Data Source=(localdb)\v11.0" and LocalDB process is started as a child process of the application. A few minutes after the last connection to this process is closed the process shuts down. LocalDB connections support AttachDbFileName property, which allows developers to specify a database file location. LocalDB will attach the specified database file and the connection will be made to it.

    Read the article

  • How do I get a Canon MG, MP and MX series USB printer working?

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0 Here is what I have tried: Tried the HK link again, but no luck so far. However, I connected the printer wirelessly to router on other xp box. Installing the driver from ppa:michael-gruz/canon doesn't work, but the driver is installed

    Read the article

  • One eye on my dinner and one eye on SQL server

    - by fatherjack
    LiveJournal Tags: RedGate,Work Life Balance,Tips and Tricks,SQL Server This is somewhere between a Tweet and a proper blog article - would that be a Bleet? Anyway, I was at a local restaurant yesterday and after placing my order I was thinking about having to get home and log in to check some SQL Servers and then the thought came to me that as we were near civilisation there was likely to be a 3G signal that might actually make using the web browser on my phone bearable. It was surprisingly fast on my HTC Desire, it was almost as good as Wi-Fi. RedGate SQL Monitor works fine on the default HTC browser and here is the proof, me checking the servers while I am waiting for the meal to arrive. Everything checked out OK so I had the evening free from SQL Server. You can get a free 14 day full trial of a SQL Monitor from RedGate here or find out more about it at The Future of Monitoring. Disclosure: I am a friend of RedGate and as such regularly make positive comments about their products. I don't get paid for it but I do get free licenses for testing and reviewing purposes.

    Read the article

  • JMS : Specifying Message Paging Directory on Weblogic server.

    - by adejuanc
    Two ways to configure or modify Paging directory, here the examples : 1.- Via config.xml file. <paging-directory>C:\temp</paging-directory> <jms-server> <name>JMSServerMS1</name> <target>MS1</target> <persistent-store xsi:nil="true"></persistent-store> <hosting-temporary-destinations>true</hosting-temporary-destinations> <temporary-template-resource xsi:nil="true"></temporary-template-resource> <temporary-template-name xsi:nil="true"></temporary-template-name> <message-buffer-size>-1</message-buffer-size> <paging-directory>C:\temp</paging-directory> <paging-file-locking-enabled>true</paging-file-locking-enabled> <expiration-scan-interval>30</expiration-scan-interval> </jms-server> ------------------------------------------------------- 2 .- Via WLST (Weblogic scripting tool) startEdit() cd('/Deployments/JMSServerMS1') cmo.setPagingDirectory('C:\\temp') activate()

    Read the article

  • Partner Webcast - Oracle VM Server for SPARC

    - by dmitry.nefedkin(at)oracle.com
    Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:RO; mso-fareast-language:EN-US;} March 17th, 9am CET  (10am EET)Oracle VM Server for SPARC (previously called Sun Logical Domains) provides highly efficient, enterprise-class virtualization capabilities for Oracle's SPARC T-Series servers. Oracle VM Server for SPARC allows you to create up to 128 virtual servers on one system to take advantage of the massive thread scale offered by SPARC T-Series servers and the Oracle Solaris operating system. And all this capability is available at no additional cost. Agenda Overview of VM technologies from Oracle LDoms introduction Values and benefits Feature details LDoms demo Q&A Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. To register, please click here For any questions please contact [email protected].

    Read the article

  • How do I convince my team that a requirements specification is unnecessary if we adopt user-stories?

    - by Nupul
    We are planning to adopt user-stories to capture stakeholder 'intent' in a lightweight fashion rather than a heavy SRS (software requirements specifications). However, it seems that though they understand the value of stories, there is still a desire to 'convert' the stories into an SRS-like language with all the attributes, priorities, input, outputs, source, destination etc. User-stories 'eliminate' the need for a formal SRS like artifact to begin with so what's the point in having an SRS? How should I convince my team (who are all very qualified CS folks by the way - both by education and practice) that the SRS would be 'eliminated' if we adopted user-stories for capturing the functional requirements of the system? (NFRs etc can be captured too, but that's not the intent of the question). So here's my 'work-flow' argument: Capture initial requirements as user-stories and later elaborate them to use-cases (which are required to be documented at a low level i.e. describing interactions with the UI prototypes/mockups and are a deliverable post deployment). Thus going from user-stories to use-cases rather than user-stories to SRS to use-cases. How are you all currently capturing user-stories at your workplace (if at all) and how do you suggest I 'make a case' for absence of SRS in presence of user-stories?

    Read the article

  • Stackify Gives Devs a Crack at the Production Server

    - by Matt Watson
    Originally published on SDTimes.com on 7/9/2012 by David Rubinstein.It was one of those interviews where you get finished talking about a company’s product, and you wonder aloud, “Well, THAT makes sense! Why hasn’t anyone thought of that before?” Matt Watson, CEO of Kansas City, Mo.-based startup Stackify, was telling me that the 10-person company is getting ready to launch its product in August (it’s in beta now) that will give developers an app-centric look into production servers so they can support and troubleshoot apps and fix bugs. Of course, this hasn’t happened in the past because of the security concerns of IT administrators, and a decided lack of expertise on the part of developers. Stackify installs on a server and acts like a proxy for developers, collecting data about the environment, discovering all the applications, scanning for config file changes, and doing server monitoring. “We become the central point that developers can see everything they need to know about their applications,” he said. “Developers can look at the files that are deployed, and query databases in a safe way.”  In his words:“The big thing we’re hoping is just giving them (developers) visibility. Most companies want to hire the junior developers that they pay $50,000 a year right out of college to do application support and troubleshooting and fix bugs, but those people don’t have access to production servers to troubleshoot. It becomes very difficult for them to do their job, so they end up spending all of their day bugging the senior developers, the managers or the system administrators to track down this stuff, which creates a huge bottleneck. And so what we can do is give that visibility to those lower-level people so that they can do this work and free up the higher-level people so they can be working on the next big thing.”Stackify itself might just prove to be the next big thing.

    Read the article

  • GlassFish Server 3.1.2.2 Maven Coordinates

    - by arungupta
    GlassFish Server 3.1.2.2 was released a few weeks ago. This micro release fixed a couple of important bugfixes - one in JAX-WS (JAX-WS-1059) and another one related to JK listener with Apache + mod_ajp_proxy (GLASSFISH-18446). This release is already integrated in NetBeans 7.2 and you can download separately from here. Maven coordinates for this build are now also described on the download page. The following fragment in your pom.xml will allow you to invoke embedded-glassfish:run, embedded-glassfish:deploy, and other similar commands. <dependency>    <groupId>org.glassfish.embedded</groupId>     <artifactId>maven-embedded-glassfish-plugin</artifactId>     <version>3.1.2.2</version> </dependency> GlassFish Embedded Server Guide provide more details about setup etc. Similarly full platform or Web profile implementation of GlassFish can be included as a single JAR using <dependency>    <groupId>org.glassfish.main.extras</groupId>    <artifactId>glassfish-embedded-web</artifactId>    <version>3.1.2.2</version></dependency> Of course, you need to replace "glassfish-embedded-web" with "glassfish-embedded-all" to get complete platform.  The download page provide more details different bundles and complete maven coordinates. Or you can get started with the simple zip bundle as well.

    Read the article

  • Sql Server Prevent Saving Changes That Require Table to be Re-created

    When working with SQL Server Management studio, if you use the Design view of a table and attempt to make a change that will require the table to be dropped and re-added, you may receive an error message like this one: Saving changes is not permitted.  The changes you have made require the following tables to be dropped and re-created.  You have either made changes to a table that cant be re-created or enabled the option Prevent saving changes that require the table to be re-created. In truth, its quite likely that you didnt enable such an option, despite the error dialogs accusations, as it is enabled by default when you install SQL Management Studio.  You can learn more about the issue in the KB article, Error message when you try to save a table in SQL Server 2008: Saving changes is not permitted. Warning: As the above article states, it is not recommended that you turn off this option (at least not permanently), as it will ensure that you do not accidentally change the schema of a table such that data is lost.  Do so at your peril. The simplest way to bypass this error is to go into Option Designers and uncheck the option Prevent saving changes that require table re-creation.  See the screenshot below. The main reason why you will see this error is if you attempted to do any of the following to the table whose design you are saving: Change the Allow Nulls setting for a column Reorder columns Change any columns data type Add a new column The recommended workaround is to script out the changes to a SQL file and execute them by hand, or to simply write out your own T-SQL to make the changes. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Replicate GAE Datastore On A Server LAN in Java

    - by Franz Noel
    There may be instances wherein one Company Client may not have internet connection on their vicinity. Either their Internet Service Provider currently experience a down time or there are some other problems involving the network, but not their LAN. GAE seems to be needing a connection at all times in the internet. I only need GAE Datastore. I'm thinking about a different application. Creating a Java Swing Client, for instance, and connecting to the Office Server via HRD of GAE Datastore. When I tried to check on the solutions for Java, it does not say anything about uploading all data and I do not need the App. I just need the GAE Datastore. In Java GAE, only indexes can be able to be manipulated. So, is there any tricks/ideas that you can use HRD with GAE Datastore on Java with an Internal Office Server combined? This way, it may provide service even during network down times. (Can somebody create me a tag of gae-datastore, please.)

    Read the article

  • Architecture- Tracking lead origin when data is submitted by a server

    - by Kevin
    I'm looking for some assistance in determining the least complex strategy for tracking leads on an affiliate's website. The idea is to make the affiliate's integration with my application as easy as possible. I've run into theoretical barriers, so i'm here to explore other options. Application Overview: This is a lead aggregation / distribution platform. We will be focusing on the affiliate portion of this website. Essentially affiliates sign up, enter in marketing campaigns and sell us their conversions. Problem to be solved: We want to track a lead's origin and other events on the affiliate site. We want to know what pages, ads, and forms they viewed before they converted. This can easily be solved with pixel tracking. Very straightforward. Theoretical Issues: I thought I would ask affiliates to place the pixel where I could log impressions and set a third party cookie when the pixel is first called. Then I could associate future impressions with this cookie. The problem is that when the visitor converts on the affiliate's site and I receive their information via HTTP POST from the Affiliate's server I wouldn't be able to access the cookie and associate it with the lead record unless the lead lands on my processor via a redirect and is then redirected back to the affiliate's landing page. I don't want to force the affiliates to submit their forms directly to my tracking site, so allowing them to make an HTTP POST from their server side form processor would be ideal. I've considered writing JavaScript to set a First Party cookie but this seems to make things more complicated for the affiliate. I also considered having the affiliate submit the lead's data via a conversion pixel. This seems to be the most ideal scenario so far as almost all pixels are as easy as copy/paste. The only complication comes from the conversion pixel- which would submit all of the lead information and the request would come from the visitor's machine so I could access my third party cookie.

    Read the article

  • Ubuntu's security, Gaming, X server, situation [closed]

    - by ShortCircuit
    Little background story. So when I first heard about the NSA spying on people I wasn't surprised, it also was the reason why I switched to Ubuntu. (Full time) It had it's disadvantages when comparing to Windows and it's AAA games and other stuff. My best friend is somewhat upset about me, using full time Ubuntu, because we play a game named "Dayz (an addon for Arma II)" and WineHQ wasn't of any help. Not to mention that he keeps asking me if WineHQ can run Dayz, but he clearly doesn't understand the situation of WineHQ, that it's free, that you have to be happy with what you got at the moment. (I'm not going to dual boot because, how else is gaming on Ubuntu/Linux going to happen?) But whenever I was in a nasty situation where I could do something so simply on Windows and not/hard on Ubuntu, I always thought "It's almost virus free, It's free, No one is spying on me." My Questions: My English isn't all that good, so could some one simplify/explain what the hell is going on the below standing link? Ubuntu Spyware: What to Do? https://www.gnu.org/philosophy/ubuntu-spyware.html When will gaming on Linux/Ubuntu be a real thing? I've heard that the X server's code is a mess and that Wayland will replace X server. When/will this come reality? (I might have understood this wrong.)

    Read the article

  • How do I start Ubuntu without X server?

    - by Kaare Mikkelsen
    So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

    Read the article

  • Canon MG6100 series USB Printer not mounting

    - by user35201
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

    - by Martin Oscarsson
    I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • How do you explain to an "agile" team that they still need to plan the software they write?

    - by user23157
    This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

    Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >