Search Results

Search found 16644 results on 666 pages for 'traffic management'.

Page 595/666 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

  • Primary/secondary ethernet interfaces via NetworkManager in Ubuntu 9.10

    - by Josh
    I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local... EDIT: Here's my routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 172.16.151.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 172.16.30.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.16.30.2 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 eth1 I want the 172.16.30.2 network to be the primary one and the 10.1.0.0 network to be the secondary one. EDIT2: My nameservers are also incorrect. It seems like Ubuntu is bringing the networks up in order, eth0, then 1, then 2, and the DHCP information from eth1 is overriding eth0, and eth2 is overriding eth1. How can I reverse this so the DHCP information from eth0 is the "master"? EDIT3: This seems to be an issue with Gnome's NetworkManager.

    Read the article

  • VPN Connection Causes Internal LAN Connection Loss with Server

    - by sleepisfortheweak
    I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

    Read the article

  • LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

    - by Stefan M
    I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

    Read the article

  • Problem with several USB devices on Windows XP. How to diagnose USB device?

    - by Lukasz Baran
    Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

    Read the article

  • Conflicting ip routes with local table on attaching a virtual network interface

    - by user1071840
    I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

    Read the article

  • APC PHP cache size does not exceed 32MB, even though settings allow for more

    - by hardy101
    I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

    Read the article

  • D-Link DIR-300 slows down / loses network

    - by basic6
    there are 2 buildings (A and B). In bldg A is an open WLAN (which I'm allowed to use btw). In bldg B is a computer that I want to connect to that network. So I flashed an old D-Link DIR-300 AP with DD-WRT, mounted it to the wall (bldg B) near a window, attached a 13 dBi directional antenna (pointing to bldg A) and configured it as AP client in that wireless network. Then there's another AP, connected to the D-Link AP, acting as standard access point, which the computer is connected to. That's basically working so far, but: Every now and then the connection is lost. Not the connection between the computer and the D-Link (I can access the DD-WRT admin page normally) or the connection between the D-Link and the WLAN (in Status - Wireless it says it's still connected to the network), but when I want to access a web page (which only works if I'm connected to the wireless network from bldg A), my Firefox keeps "Looking for" (name resolution) without finding anything. When I reset the D-Link (power off, power on) in this situation, after some moments, everything's working fine again (Internet access). I've no idea why this is happening, but usually it's at most every few weeks (most times when nobody was using the computer, so no traffic). Compared to the connection speed when I connect directly to the WLAN in bldg A (Laptop), the speed in bldg B is rather slow, but I have the impression that this difference is worse in the last few days. A few minutes ago, I got 582 KB/s down and 911 KB/s up in bldg A (directly/laptop) and 84 KB/s down and 9 KB/s up in bldg B. The speed in bldg B used to be way higher (I remember 200 KB/s up) while the actual network speed in bldg A was lower than it is now (close to those 200). I'm aware that the wireless connection between those buildings should slow things down, but I'm wondering why this difference has become that extreme. Thanks for any tips... Update: I currently want to upload a large file (1.5 GB) via FTP (FileZilla). Since that caused the D-Link to disconnect (as described in first post), I took my laptop to bldg A, connected directly to the original WLAN (bypassing my D-Link) and tried the same upload. Guess what - same issue: At some point the connection is dead (at this point I would have reset my D-Link if I was connected to it). Just as the D-Link, my laptop is still connected, but not even name resolution is working ("Looking for..." in Firefox). After reconnecting, it's working again. Maybe my D-Link isn't the problem at all...

    Read the article

  • Share the same subnet between Internal network and VPN Clients

    - by Pascal
    I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

    Read the article

  • What Sort of Server Setup Am I Likely to Need? - School A/V streaming

    - by DeathMagus
    My prior experience with servers has generally been limited to home file-sharing servers, low-traffic web-servers, and the like. This leaves me with the technical knowledge of how to set up a system, but little experience in terms of scaling said system. My current project, however, has me as the technical lead in setting up a school for online audio and video streaming. The difficulty I'm running into is that I don't quite have the experience to guess what they'll need, and they don't have the experience to tell me - so I've tried to ask as many pertinent questions about what they want to do with their server, and here's what I found out: About 1000 simultaneous users, and hoping to expand (possibly significantly) Both video and audio streaming, at obviously the highest quality possible Support for both live and playlist-based streaming. Probably only one channel, but as it's an educational opportunity, I imagine letting them have a few more wouldn't hurt. No word on whether they're locked into Windows or whether Linux is acceptable. Approximate budget - $7000. It may actually be about $2k less than this, because of a mishap with another technology firm (they ordered a $7000 DV tape deck for some reason, and now the company wants them to pay a 30% restocking fee). The tentative decisions I've already made: I'm planning on using Icecast 2 for my streaming server, fed by VLC Shoutcast encoding. Since the school already has a DMZ set up, I plan on placing the Icecast server in there, and feeding it through their intranet from a simple workstation computer in their studios. This system isn't in any way mission critical - it's an education tool (they're a media magnet school), so I figure redundancy is not worthwhile to them from a cost:benefit perspective. What I don't know is this: How powerful of a server will I need? What is likely to be my major throttle - bandwidth? How can I mitigate that? Will I need anything special for the encoding workstation other than professional video and audio capture cards and a copy of VLC? Are there any other considerations that I'm simply missing? Thanks a lot for any help - if there's more information you need, let me know and I'll tell you all I can.

    Read the article

  • MongoDB and datasets that don't fit in RAM no matter how hard you shove

    - by sysadmin1138
    This is very system dependent, but chances are near certain we'll scale past some arbitrary cliff and get into Real Trouble. I'm curious what kind of rules-of-thumb exist for a good RAM to Disk-space ratio. We're planning our next round of systems, and need to make some choices regarding RAM, SSDs, and how much of each the new nodes will get. But now for some performance details! During normal workflow of a single project-run, MongoDB is hit with a very high percentage of writes (70-80%). Once the second stage of the processing pipeline hits, it's extremely high read as it needs to deduplicate records identified in the first half of processing. This is the workflow for which "keep your working set in RAM" is made for, and we're designing around that assumption. The entire dataset is continually hit with random queries from end-user derived sources; though the frequency is irregular, the size is usually pretty small (groups of 10 documents). Since this is user-facing, the replies need to be under the "bored-now" threshold of 3 seconds. This access pattern is much less likely to be in cache, so will be very likely to incur disk hits. A secondary processing workflow is high read of previous processing runs that may be days, weeks, or even months old, and is run infrequently but still needs to be zippy. Up to 100% of the documents in the previous processing run will be accessed. No amount of cache-warming can help with this, I suspect. Finished document sizes vary widely, but the median size is about 8K. The high-read portion of the normal project processing strongly suggests the use of Replicas to help distribute the Read traffic. I have read elsewhere that a 1:10 RAM-GB to HD-GB is a good rule-of-thumb for slow disks, As we are seriously considering using much faster SSDs, I'd like to know if there is a similar rule of thumb for fast disks. I know we're using Mongo in a way where cache-everything really isn't going to fly, which is why I'm looking at ways to engineer a system that can survive such usage. The entire dataset will likely be most of a TB within half a year and keep growing.

    Read the article

  • VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

    - by Patrick
    Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

    Read the article

  • NIC is receiving, but not transmitting at all?

    - by Shtééf
    I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

    Read the article

  • RDP exits immediately after connecting to Windows Server 2008 R2

    - by carpat
    Background: I recently got a Windows cloud VPS server. I don't have much experience with server admin (I'm a programmer), and what little I do have is with linux servers. Ever since getting the server I've been having issues with RDP. I can connect about two or three times, after which point I can't connect until one of the tech guys "fixes" it (see below). When I connect, I can stay connected for hours with no problem. When the problem connecting starts, the first time I try to log in, the remote desktop window pops up, starts connecting, and then exits with "Your Remote Desktop session has ended". After that, for about 10-20 minutes if I try to connect again, the connections times out with Remote Desktop can't connect to the computer for one of these reasons: 1) Remote access on the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network then goes back to connecting once and immediately disconnecting. All of the updates are installed. The firewall has been correctly configured to let RDP traffic through. The remote setting is "Allow connections from computers running any version of Remote Desktop". I tried creating a second user, and when I can't connect, I can't connect to that user either. I've tried both soft and hard reboots, neither of which help. I've tried connecting from two different computers (both running Windows 7) from two different networks (work and home), and the behavior is the same. Everything else on the server continues to run fine (IIS-served http pages, Tomcat-served java pages, svn, ping). The "fix" that the tech guys supply is simply logging into the console on their end, after which point I can connnect 2 or 3 times again. The event viewer on the server has "authentication failure" (or something similar) events generated when I attempt to log in and can't. I can't get to the actual event at the moment as I'm currently in the can't connect stage, and waiting for the techs to log in. But when I searched for the event earlier this morning I couldn't find anything useful. Can anyone help?

    Read the article

  • Subdomains, folders, internationalization, and hosting solutions

    - by justinbach
    I'm a web developer and I recently landed a gig to develop the US / international version of a site for a company that's big in Europe but hasn't done much expansion into the US yet. They've got an existing site at company.com, which should remain visible to European customers after the new site goes up, and an existing (not great) site at company.us, which I'm going to be redeveloping (the .us site will be taken down when my version goes up--keep reading for details). My solution needs to take into account the fact that there are going to be new, localized versions of the site in the fairly near future, so the framework I'm writing needs to be able to handle localizations fairly easily (dynamically load language packs, etc). The tricky thing is the European branch of the company manages the .com site hosting (IIS-based) and the DNS, while I'll be managing the US hosting (and future localizations), which will likely be apache-based. I've never been a big fan of the ".us" TLD--I think most US users are accustomed to visiting the .com--so the thought is that the European branch will detect the IP of inbound traffic and redirect all US-based addresses to us.example.com (or whatever the appropriate localized subdomain might be), which would point to the IP address of my host. I'd then serve the appropriate locale-specific content by pulling the subdomain from the $_SERVER superglobal (assuming PHP). I couldn't find any examples of international organizations that take a subdomain-based approach for localization, but I'm not sure I have any other options as a result of the unique hosting structure here (in that there's not a unified hosting solution for the European and US sites). In my experience, the US version of an international site would live at domain.com/us, not at us.domain.com, and I'd imagine that this has to do with SEO (subdomains are treated as separate sites, so improved rankings for the US site wouldn't help the Canadian version if subdomains are used to differentiate between them). My question is: is there a better approach to solving this problem than the one I'm taking? Ideally, I'd like to use a folder-based approach (see adidas.com as an example of what I'm talking about), but I'm not sure that's a possibility given that the US site (and other localizations) will not be hosted on the same server as the rest of the .com. Can you, in IIS, map a folder (e.g. domain.com/us) to a different IP address? What would you recommend? Thanks for your consideration.

    Read the article

  • What router hardware or software should be used when multiple public IPs are routed into the same LAN?

    - by lcbrevard
    I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

    Read the article

  • Why is BIND giving me a SERVFAIL in this case? (Notes inside)

    - by imaginative
    Woke up this morning to a bunch of the following: root@foo:/etc/bind# dig @1.2.3.4 foo.example.com ; <<>> DiG 9.6.1-P2 <<>> @1.2.3.4 foo.example.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 36121 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;;foo.example.com. IN A ;; Query time: 0 msec ;; SERVER: 1.2.3.4#53(1.2.3.4) ;; WHEN: Thu Apr 1 09:57:59 2010 ;; MSG SIZE rcvd: 31 Some background on the fictitious "1.2.3.4". It's a slave name server in my nameserver "farm". Technically I have ns1 (being the master) and ns2/ns3. Currently ns1/ns2 are down for maintenance, so I left ns3 at it serving live traffic. That's the point, DNS is supposed to be resilient. Now the odd part is, "1.2.3.4" was serving requests for example.com just fine for the last 4-5 days. This morning I get a phone call that it's non-responsive. After investigation I see the message you see above, SERVFAIL. I looked into the zone file and saw the following: example.com IN SOA ns1.example.com. hostmaster.mail.example.com. ( I wondered if at this point that the nameserver thought it was not authoritative over example.com and adjusted it to the following: example.com IN SOA ns3.example.com. hostmaster.mail.example.com. ( After that, it started responding again for all authoritative queries for example.com. I have no idea why. I thought these things were supposed to be normalized upon zone transfer from ns1 - ns3? Can someone please example why this happened and how to prevent it from happening in the future? I've never had a similar problem, and because I don't understand it well, I might be missing some critical information in this question. So please let me know if I can further add any detail to make things clearer as well. One more thing to note: I have other domains that I'm authoritative for that have their SOA still saying ns1.example.com. and not ns3.example.com. Those domains are serving requests just fine! Is it a matter of time before they stop also and I have to change SOA to ns3.example.com? Is this also only required because ns1 and ns2 are currently offline?

    Read the article

  • Apache VirtualHost Blockhole (Eats All Requests on All Ports on an IP)

    - by Synetech inc.
    I’m exhausted. I just spent the last two hours chasing a goose that I have been after on-and-off for the past year. Here is the goal, put as succinctly as possible. Step 1: HOSTS File: 127.0.0.5 NastyAdServer.com 127.0.0.5 xssServer.com 127.0.0.5 SQLInjector.com 127.0.0.5 PornAds.com 127.0.0.5 OtherBadSites.com … Step 2: Apache httpd.conf <VirtualHost 127.0.0.5:80> ServerName adkiller DocumentRoot adkiller RewriteEngine On RewriteRule (\.(gif|jpg|png|jpeg)$) /p.png [L] RewriteRule (.*) /ad.htm [L] </VirtualHost> So basically what happens is that the HOSTS file redirects designated domains to the localhost, but to a specific loopback IP address. Apache listens for any requests on this address and serves either a transparent pixel graphic, or else an empty HTML file. Thus, any page or graphic on any of the bad sites is replaced with nothing (in other words an ad/malware/porn/etc. blocker). This works great as is (and has been for me for years now). The problem is that these bad things are no longer limited to just HTTP traffic. For example: <script src="http://NastyAdServer.com:99"> or <iframe src="https://PornAds.com/ad.html"> or a Trojan using ftp://spammaster.com/[email protected];[email protected];[email protected] or an app “phoning home” with private info in a crafted ICMP packet by pinging CardStealer.ru:99 Handling HTTPS is a relatively minor bump. I can create a separate VirtualHost just like the one above, replacing port 80 with 443, and adding in SSL directives. This leaves the other ports to be dealt with. I tried using * for the port, but then I get overlap errors. I tried redirecting all request to the HTTPS server and visa-versa but neither worked; either the SSL requests wouldn’t redirect correctly or else the HTTP requests gave the You’re speaking plain HTTP to an SSL-enabled server port… error. Further, I cannot figure out a way to test if other ports are being successfully redirected (I could try using a browser, but what about FTP, ICMP, etc.?) I realize that I could just use a port-blocker (eg ProtoWall, PeerBlock, etc.), but there’s two issues with that. First, I am blocking domains with this method, not IP addresses, so to use a port-blocker, I would have to get each and every domain’s IP, and update theme frequently. Second, using this method, I can have Apache keep logs of all the ad/malware/spam/etc. requests for future analysis (my current AdKiller logs are already 466MB right now). I appreciate any help in successfully setting up an Apache VirtualHost blackhole. Thanks.

    Read the article

  • Add Your Own Domain to Your WordPress.com Blog

    - by Matthew Guay
    Now that you’ve got a nice blog on WordPress.com, why not get your own domain to brand your site?  Here’s how you can easily register a new domain or move your existing domain to your WordPress site. By default, your free WordPress address is yourblog’sname.wordpress.com.  But whether this is a personal or a company blog, it can be nice to have your own domain to really brand your site and make it your own.  Or, if you already have another website and want to use WordPress as a blog for it, you could even add blog.yoursite.com or any other subdomain. Adding a domain to your WordPress.com is a paid upgrade; registering and mapping a new domain to your account costs $14.97 a year, while mapping a domain you already own to your WordPress blog costs $9.97 a year. Getting Started Login to your blog’s dashboard, click the arrow beside Upgrades in the sidebar, and select Domains. Enter the domain or subdomain you want to add to your site in the text box, and click Add domain to blog.   If you entered a new domain you want to register, WordPress will make sure the domain is available and then present you a registration form to register the domain.  Enter your information, and then click Register Domain.   Or, if you enter a domain that’s already registered, you will see the following prompt. If this domain is a domain you own, you can map it to WordPress.com.  Login to your domain registrar account and switch your nameserver to: NS1.WORDPRESS.COM NS2.WORDPRESS.COM NS3.WORDPRESS.COM Your DNS settings page for your domain may be different, depending on your registrar.  Here’s how our domain settings looked. Alternately, if you’re wanting to map a subdomain, such as blog.yoursite.com to your WordPress blog, create the following CNAME record on your domain register.  You may have to contact your domain registrar’s support to do this.  Substitute your subdomain, domain, and blog name when creating the record. subdomain.yourdomain.com. IN CNAME yourblog.wordpress.com. Once your settings are correct, click Try Again in your WordPress dashboard.  The DNS settings may take a while to update, but once WordPress can tell your DNS settings point to it, you will see the following confirmation screen.  Click Map Domain to add this domain to your WordPress blog. Now you’re ready to pay for your domain mapping or registration.  Depending on your purchase, the information and price shown may be different.  Here we’re mapping a domain we already have registered, so it costs $9.97.  Select your method of payment, enter your payment information or signin with your Paypal account, and continue as usual. Once your purchase is finished, you’ll be returned to the Domains page on WordPress.  Try going to your new domain, and make sure it opens your blog.  If it works, then click the bullet beside the new domain, and click Update Primary Domain.  Now, when people visit your WordPress site, they’ll see your new domain in the address bar.  You can still access your blog from your old yourname.wordpress.com address, but it will redirect to you new domain. Conclusion Having a personalized domain is a great way to make your blog more professional, while still taking advantage of the ease of use that WordPress.com offers.  And, if you have your own domain, you can easily move to your site traffic to a different hosting provider in the future if you need to.  The process is slightly complicated, but for $15/year we found this one of the best upgrades you could do to your WordPress.com blog. If you want to see an example of a site created with Wordpress, check out Matthew’s tech site techinch.com. And, if you’re just getting started with WordPress, check out our series on how to Start your WordPress.com blog, Personalize it, and Easily Post Content to it from anywhere. Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareHow To Start Your Own Professional Blog with WordPressDisable Logon to Windows Computers When Not Connected to a DomainMake a Backup Copy of your Production Wordpress Blog on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Setup Remote Access in Windows Home Server

    - by Mysticgeek
    One of the many awesome features of Windows Home Server, is the ability to access your server and other computers on your network remotely. Today we show you the steps to enable Remote Access to your home server from anywhere you have an Internet connection. Remote Access in Windows Home Server has a lot of great features like uploading and downloading files from shared folders, accessing files from machines on your network, and controling machines remotely (on supported OS versions). Here we take a look at the basics of setting it up, choosing a domain name, and verifying you can connect remotely. Setup Remote Access in Windows Home Server Open the Windows Home Server Console and click on Settings. Next select Remote Access, it is off by default, just click the button to turn it on. Wait while your router is configured for remote access, when it’s complete click Next. Notice that it will enable UPnP, if you don’t wish to have that enabled, you can manually forward the correct ports. If you have any problems with the router being automatically configured, we’ll be taking a look at a more detailed troubleshooting guide in the future. The router is successfully configured, and we can continue to the next process of configuring our domain name. The Domain Name Setup Wizard will start. Notice you will need a Windows Live ID to set it up –which is typically your hotmail address. If you don’t already have one, you can get one here. Type in your Live ID email address and password and click Next… Agree to the Home Server Privacy Statement and the Live Custom Domains Addendum. If you’re concerned about privacy and want to learn more about the domain addendum, make sure to read about it before agreeing. There is nothing abnormal to point out about either statement, but if this is your first time setting it up, it’s good to review the information.   Now choose a name for the domain. You should select something that is easy to remember and identifies your home server. The name can contain up to 63 characters, numbers, letters, and hyphens…and must begin and end with a letter or number. When you have the name figured out click the Confirm button. Note: You can only register one domain name per Live ID. If the name isn’t already taken, you’ll get a confirmation message indicating it’s god to go. The wizard is complete and you can now access the home server from the URL provided. A few other things to point out after you’ve set it up…under Domain Name click on the Details button… Which pulls up the domain detail information and you can refresh the data to verify everything is working correctly. Or you can click the Configure button and then change or release your current domain name. Under Web site settings, you can change you site page headline to whatever you want it to be. Accessing Home Server Remotely After you’ve gotten everything setup for your home server domain, you can begin to access it when you’re away from home. Simply type in the domain address you created in the previous steps. The start page is rather boring…and to start accessing your data, click the Log On button in the upper right hand corner. Then enter in your home server credentials to gain access to your files, folders, and network computers. You won’t be able to log in with your administrator user account however, to protect security of your network. Once you’re logged in, you’ll be able to access different parts of your home server shares and network computers. Conclusion Now that you have Remote Access setup, you should be able to access and manage your files easily. Being able to access data from your home server remotely is great when you need to get certain files while on the road. The web UI is pretty self explanatory, works best in IE as ActiveX is required, and is smooth and easy to work with. In future articles we’ll be covering a lot more regarding remote access, including more of the available features, troubleshooting connection issues, and enabling access for other users. Similar Articles Productive Geek Tips GMedia Blog: Setting Up a Windows Home ServerHow to Remote Desktop to the Actual Server Console on Windows 2003Use Windows Vista Aero through Remote Desktop ConnectionAccess Your MySQL Server Remotely Over SSHShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

    Read the article

  • The ASP.NET Daily Community Spotlight - How posts get there, and how to make it your Visual Studio Start Page

    - by Jon Galloway
    One really cool part of my job is selecting the articles for the Daily Community Spotlight, on the home page of the ASP.NET website. The spotlight highlights a new post about ASP.NET development every day from a member of the ASP.NET community. You can find it on the home page of the ASP.NET site, at http://asp.net These posts aren't automatically drawn from a pool of RSS feeds or anything - I pick a new post for each day of the year. How I pick the posts I have a few important selection criteria: Interesting to well rounded ASP.NET developers The ASP.NET website has a lot of material for all skill and experience levels, from download / get started to advanced. I try to select community spotlight posts to round that out with fresh and timely information that working ASP.NET developers can really use. Posts highlight solutions to common problems, clever projects and code that helps you leverage ASP.NET, and important announcements about things you can use today. As part of that, I try to mix between ASP.NET MVC, Web Forms, and Web Pages (a.k.a. WebMatrix). As a professional developer, I want to keep on top of all of my options for ASP.NET development, and the common platform base they all share generally means that good ASP.NET code is good ASP.NET code. Exposing new and non-Microsoft community members as much as possible The exercise of selecting good ASP.NET community posts every day of the year has made me think about what the community is. Given the choice, I'll always favor non-Microsoft employees, but since Microsoft often hires ASP.NET community members and MVP's (myself included), I really think that the ASP.NET community includes developers who are using and writing about ASP.NET, both inside and outside of Microsoft. I'm especially excited about the opportunity to highlight new and lesser known bloggers. Usually being featured on the ASP.NET Community Spotlight gives a pretty good traffic bump, and I love being able to both provide great content to the community and encourage lesser known community members by giving them some (much deserved) attention. Announcements only when they're useful to working developers - not marketing Some of the posts are announcements about new releases, such as Scott Hanselman's post on ASP.NET Universal Providers for Session, Memebership, and Roles. I include those when I think they're interesting and of immediate use to you on projects. I occasionally get asked to link to new content from a team at Microsoft; if it's useful and timely content I'll ask them to point me to a blog post by an actual person rather than a faceless team. How the posts are managed This feed used to be managed by an internal spreadsheet on a Sharepoint site, which was painful for a lot of reasons. I took a cue from Jon Udell, who uses of a public Delicious feed feed for his Elm City project, and we moved the management of these posts over to a Delicious feed as well. You can hear more about Jon's use of Delicious in Elm City in our Herding Code interview - still one of my favorite interviews. We ended up with a simpler scenario, but Note: I watched the Yahoo/Delicious news over the past year and was happy to see that Delicious was recently acquired by the founders of YouTube. I investigated several other Delicious competitors, but am happy with Delicious for now. My Delicious feed here: http://www.delicious.com/jon_galloway You can also browse through this past year's ASP.NET Community Spotlight posts using the (pretty cool) Delicious Browse Bar Submitting articles I'm always on the lookout for new articles to feature. The best way to get them to me is to share them via Delicious. It's pretty easy - sign up for an account, then you can add a post and share it to me. Alternatively, you can send them to me via Twitter (@jongalloway) or e-mail (). If you do e-mail me, it helps to include a short description and your full name so I can credit you. Way too many developer blogs don't include names and pictures; if I can't find them I can't feature the post. Subscribing to the Community Spotlight feed The Community Spotlight is available as an RSS feed, so you might want to subscribe to it: http://www.asp.net/rss/spotlight Setting the ASP.NET Community Spotlight feed as your Visual Studio start page If you're an ASP.NET developer, you might consider setting the ASP.NET Community Spotlight as the content for your Visual Studio Start Page. It's really easy - here's how to do it in Visual Studio 2010: Display the Visual Studio Start Page if it's not already showing (View / Start Page) Click on the Latest News tab and enter the following RSS URL: http://www.asp.net/rss/spotlight If you didn't previously have RSS feeds enabled for your start page, click the Enable RSS Feed button Now, every time you start up Visual Studio you'll see great content from members of the ASP.NET community: You can also configure - and disable, if you'd like - the Visual Studio start page in the Tools / Options / Environment / Startup dialog. Credits I'll do a follow-up highlighting some places I commonly find great content for the feed, but I'd like to specifically point out two of them: Elijah Manor posts a lot of great content, which is available in his Twitter feed at @elijahmanor, on his Delicious feed, and on a dedicated website - Web Dev Tweets Chris Alcock's The Morning Brew is a must-read blog which highlights each day's best blog posts across the .NET community. He's an absolute machine, and no matter how obscure the post I find, I can guarantee he'll find it as well if he hasn't already. Did I say must read?

    Read the article

  • Compress Large Video Files with DivX / Xvid and AutoGK

    - by DigitalGeekery
    Have you ever recorded home video on a camcorder only to find the video size is enormous? What if you wanted to share a video clip on YouTube or another video sharing site, but the file size was bigger than the maximum upload size? Today we’ll look at a way to compress certain video files, such as MPEG and AVI, with Auto Gordian Knot (AutoGK). AutoGK is a free application that runs on Windows. It supports Mpeg1, Mpeg2, Transport Streams, Vobs, and virtually any codec used for an .AVI file. AutoGK will accept as input the following file types: MPG, MPEG, VOB, VRO, M2V, DAT, IFO, TS, TP, TRP, M2T, and AVI. Files are output as .AVI files and are converted using the DivX or XviD codecs. Installing and Using AutoGK Download and install AutoGK (link below) Open the AutoGK. You’ll need to navigate a few wizard screens, but you can just accept the defaults.   Choose your video file by clicking on the folder to the right of the Input file text box.   Browse for and select your video file and click “Open.”   For this example, we’ll be working with an .AVI file that’s 167MB in size.   The output file is copied into the same directory as the input file by default, but you can change this if you choose. If the input file is also .AVI, AutoGK will append an _agk to the output file so that the original is not overwritten. Next, you’ll see any audio tracks listed. You can unselect the check box if you’d like to remove the audio track. You can choose one of the Predefined size options… Or, select a Custom size in MB or Target Quality in percentage. For our example, we’ll be compressing our 167MB file to 35MB. Click on Advanced Settings. Here you can choose your codec, if you have a preference, as well as output resolution and output audio. If you’d like to use the DivX codec, you’ll need to download and install it separately. (See link below) Typically you’ll want to keep the defaults. Click “OK.” Now you’re ready to add your file conversion job to the Job queue. Click Add Job to add it to the queue. You can add multiple files conversions to the job queue and  convert them in one batch. Click Start to begin the conversion process. The process will begin. You’ll be able to see the progress in the Log window on the bottom left. When the conversion is complete you’ll see a “Job finished” and the total time in the log window.   Check your output file to see it’s compressed size. Test your video just to make sure the output quality is satisfactory.   Note:  Conversion times can vary greatly depending on the size of the file and your computer hardware. Files that are several GBs in size may take several hours to compress. AutoGK is no longer being actively developed but is still a wonderful DivX/XviD conversion tool. It can also be used to compress and convert non-copy protected DVDs. Downloads AutoGordianKnot DivX (optional) Similar Articles Productive Geek Tips Use Your Mac Mini as a Media Server Part 2Make Disk Cleanup Compress Older(or Newer) Files on XPMysticgeek Blog: Exclusive Look Inside Vreel – Including Interview With Vreel Founder!Friday Fun: Watch HD Video Content with MeevidConvert a DVD Movie Directly to AVI with FairUse Wizard 2.9 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

    Read the article

  • Tykie

    - by Brian
    Here’s the obituary my mother wrote for Tykie, I still miss the little guy quite a bit. Anyone who’s interested in further information on hearing dogs should check out the IHDI website. I cannot begin to express how helpful a hearing dog can be for the hearing impaired. If you feel so inclined, please make a donation. In Memoriam, Tykie 1993-2010 The American Legion Post 401, South Wichita, KS, supported one of its members and commander by sponsoring a service dog for him. Unlike most service dogs this one was for the hearing impaired. Both Ocie and Betty Sims had hearing loss – Ocie more than Betty. The Post and Auxilliary had garage sales, auctions and other fund-raising endeavors to get donations for the dog. Betty made Teddy bears with growlers that were auctioned for donations to bring a hearing dog from International Hearing Dog, Henderson, Colorado. Tykie, a small wiry, salt and pepper terrier, arrived September 1, 1994 to begin his work that included attending Post 401 meetings and celebrations as well as raising more money to be donated to IHD to help others have hearing dogs. Tykie was a young dog less than a year old when he came to Wichita. He was always anxious to please and seldom barked, though he did put out a kind of cry when he was giving his urgent announcement that someone was at the door or the telephone was ringing. He also enjoyed chasing squirrels in the backyard garden that Ocie prized. In 1995, Betty almost died of a lung infection. Tykie was at the hospital with Ocie when he could visit. Several weeks after she was able to come home after a miraculous recovery, Tykie and Ocie went to a car show in downtown Wichita. Ocie’s retina tore loose in the only eye he could see out of and he almost blind was in great pain. How Ocie and Tykie got home is still a mystery, but the family legend goes that Tykie added seeing eye dog to his repertoire and helped drive him home. Health problems continued for Ocie and when he was placed in a nursing home, Tykie was moved to be Betty’s hearing dog. No problem for Tykie, he still saw his friends at the post and continued to help with visitors at the door. The night of May 3, 1999, Betty and Tykie were in the bedroom watching TV when Tykie began hitting her with both front paws as he would if something were urgent. She said later she thought he wanted to go out. As she and the dog walked down the hall towards the back of the house, Tykie hit her again with his front paws with such urgency that she fell into a small coat closet. That small 2-by-2 closet became their refuge as that very second the roof of her house went off as the f4 tornado raced through the city. Betty acquired one small wound on her hand from a piece of flying glass as she pulled Tykie into the closet with her. Tykie was a hero that day and a lot of days after. He kept Betty going as she rebuilt her home and after her husband died April 15, 2000. Tykie had to be cared for so she had to take him outside and bring him inside. He attended weddings of grandchildren and funerals of Post friends. When Betty died February 17, 2002 Tykie’s life changed again. IHD gave approval for his transfer and retirement to Betty and Ocie’s grandson, Brian Laird, who has a similar hearing loss to his grandfather. A few days after the funeral Tykie flew to his new home in Rutherford, NJ where he was able to take long walks for a couple of years before moving back to the Kansas City area. He was still full of adventure. He was written up in a book about service dogs and his story of the tornado and his picture appeared. He spent weekends at Brian’s mother’s farm to get muddy and be afraid of cats and chickens. He also took on an odyssey as he slipped from his fenced yard in Lenexa one day and walked more than seven miles in Overland Park traffic before being found by a good Samaritan who called IHD to find out where he belonged. Tykie was deaf for about the last two years of his long life and became blind as well, but he continued to strive to please. Tykie was 16 years and 4 months when he was cremated. His ashes were scattered on the graves of Betty and Ocie Sims at Greenwood Cemetery west of Wichita on the afternoon of March 21, 2010, with about a dozen family and Post 401 members. It is still the rule. Service dogs are the only dogs allowed inside the Post home. Submitted by Linda Laird, daughter of Betty and Ocie and mother of Brian Laird.

    Read the article

  • Troubleshooting Application Timeouts in SQL Server

    - by Tara Kizer
    I recently received the following email from a blog reader: "We are having an OLTP database instance, using SQL Server 2005 with little to moderate traffic (10-20 requests/min). There are also bulk imports that occur at regular intervals in this DB and the import duration ranges between 10secs to 1 min, depending on the data size. Intermittently (2-3 times in a week), we face an issue, where queries get timed out (default of 30 secs set in application). On analyzing, we found two stored procedures, having queries with multiple table joins inside them of taking a long time (5-10 mins) in getting executed, when ideally the execution duration ranges between 5-10 secs. Execution plan of the same displayed Clustered Index Scan happening instead of Clustered Index Seek. All required Indexes are found to be present and Index fragmentation is also minimal as we Rebuild Indexes regularly alongwith Updating Statistics. With no other alternate options occuring to us, we restarted SQL server and thereafter the performance was back on track. But sometimes it was still giving timeout errors for some hits and so we also restarted IIS and that stopped the problem as of now." Rather than respond directly to the blog reader, I thought it would be more interesting to share my thoughts on this issue in a blog. There are a few things that I can think of that could cause abnormal timeouts: Blocking Bad plan in cache Outdated statistics Hardware bottleneck To determine if blocking is the issue, we can easily run sp_who/sp_who2 or a query directly on sysprocesses (select * from master..sysprocesses where blocking <> 0).  If blocking is present and consistent, then you'll need to determine whether or not to kill the parent blocking process.  Killing a process will cause the transaction to rollback, so you need to proceed with caution.  Killing the parent blocking process is only a temporary solution, so you'll need to do more thorough analysis to figure out why the blocking was present.  You should look into missing indexes and perhaps consider changing the database's isolation level to READ_COMMITTED_SNAPSHOT. The blog reader mentions that the execution plan shows a clustered index scan when a clustered index seek is normal for the stored procedure.  A clustered index scan might have been chosen either because that is what is in cache already or because of out of date statistics.  The blog reader mentions that bulk imports occur at regular intervals, so outdated statistics is definitely something that could cause this issue.  The blog reader may need to update statistics after imports are done if the imports are changing a lot of data (greater than 10%).  If the statistics are good, then the query optimizer might have chosen to scan rather than seek in a previous execution because the scan was determined to be less costly due to the value of an input parameter.  If this parameter value is rare, then its execution plan in cache is what we call a bad plan.  You want the best plan in cache for the most frequent parameter values.  If a bad plan is a recurring problem on your system, then you should consider rewriting the stored procedure.  You might want to break up the code into multiple stored procedures so that each can have a different execution plan in cache. To remove a bad plan from cache, you can recompile the stored procedure.  An alternative method is to run DBCC FREEPROCACHE which drops the procedure cache.  It is better to recompile stored procedures rather than dropping the procedure cache as dropping the procedure cache affects all plans in cache rather than just the ones that were bad, so there will be a temporary performance penalty until the plans are loaded into cache again. To determine if there is a hardware bottleneck occurring such as slow I/O or high CPU utilization, you will need to run Performance Monitor on the database server.  Hopefully you already have a baseline of the server so you know what is normal and what is not.  Be on the lookout for I/O requests taking longer than 12 milliseconds and CPU utilization over 90%.  The servers that I support typically are under 30% CPU utilization, but your baseline could be higher and be within a normal range. If restarting the SQL Server service fixes the problem, then the problem was most likely due to blocking or a bad plan in the procedure cache.  Rather than restarting the SQL Server service, which causes downtime, the blog reader should instead analyze the above mentioned things.  Proceed with caution when restarting the SQL Server service as all transactions that have not completed will be rolled back at startup.  This crash recovery process could take longer than normal if there was a long-running transaction running when the service was stopped.  Until the crash recovery process is completed on the database, it is unavailable to your applications. If restarting IIS fixes the problem, then the problem might not have been inside SQL Server.  Prior to taking this step, you should do analysis of the above mentioned things. If you can think of other reasons why the blog reader is facing this issue a few times a week, I'd love to hear your thoughts via a blog comment.

    Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >