hard drive cache - Page 598

File server share access intermittent/slow/machine unstable: win2k8r2

- by Jack B.

I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

Read the article

File server share access intermittent/slow/machine unstable: win2kr2

- by Jack B.

I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

Read the article

Sharepoint Error: [COMException (0x80004005): Cannot complete this action.

- by ifunky

Hi, I've created a site basic definition that uses different master and default pages. Everything works quite well except for whenever I create a new site based on the definition I receive the following error when browsing to the new site: [COMException (0x80004005): Cannot complete this action. Please try again.] Please try again.] Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +0 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +219 [SPException: Cannot complete this action. Please try again.] I'm able to work around this by checking out the new master page and checking it back in again and after doing so there are no further issues at all. Any ideas to what could cause this? Thanks Dan ONET.XML module section: <Modules> <Module Name="CustomMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> <File Url="Shoes.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" /> </Module> <Module Name="Default" List="116" Url=""> <File Url="default.aspx" Name="default.aspx" NavBarHome="True" IgnoreIfAlreadyExists="FALSE"> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="1"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.FooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Description" type="string">FooterLinks Description</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="0"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.SubFooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Description" type="string">Shoes home page links (under the hero image)</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <NavBarPage Name="$Resources:core,nav_Home;" ID="1002" Position="Start" /> <NavBarPage Name="$Resources:core,nav_Home;" ID="0" Position="Start" /> </File> </Module> </Modules> LOG OUTPUT: 05/21/2010 12:22:55.11 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72nz Medium Videntityinfo::isFreshToken reported failure. 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:55.26 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yf Medium Creating list "Master Page Gallery" in web "http://mmm-dev-ll/sites/Shoes/test" at URL "_catalogs/masterpage", (setuppath: "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\global\lists\mplib") 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88y1 Medium No document templates uploaded for list "Master Page Gallery" -- none found for list template "100". 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72kc Medium Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\xml\onet.xml", falling back to global site definition. 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:56.89 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h7 Medium Applying template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:57.09 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yy Medium Activating web-scoped features for template "SubSite#1" at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.12 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1c Medium Preparing 20 features for activation 05/21/2010 12:22:57.14 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium Feature Activation: Batch Activating Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfe... 05/21/2010 12:22:57.14* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium ...a71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium Feature Activation: Batch Activated Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfea... 05/21/2010 12:22:57.15* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium ...71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 88jb Medium Feature Activation: Activating Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75fb Medium Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9'). 05/21/2010 12:22:57.20 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75f8 Medium Feature Activation: Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') was activated at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:57.56 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72ix Medium Not enough information to determine a list for module "Default". Assuming no list for this module. 05/21/2010 12:22:57.87 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h8 Medium Successfully applied template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:59.48 w3wp.exe (0x1E40) 0x0980 Windows SharePoint Services General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80070057 05/21/2010 12:23:07.06 OWSTIMER.EXE (0x0884) 0x106C Office Server Setup and Upgrade 8u3j High Registry key value {SearchThrottled} was not found under registry hive {Software\Microsoft\Office Server\12.0}. Assuming search sku is not throttled. 05/21/2010 12:23:07.08 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 90gf Medium SQL: dbo.proc_MSS_PropagationGetQueryServers 05/21/2010 12:23:07.09 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wni High Resuming default catalog with reason 'GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.11 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wnj High Resuming anchor text catalog with reason GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.14 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8dvl Medium Search application '3c6751cc-37b0-470a-bfa2-bfd0b5635fe1': Provision start addresses in default content source. 05/21/2010 12:23:07.15 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 7hmh High exception in SearchUpgradeProvisioner Keyword Config System.InvalidOperationException: jobServerSearchServiceInstance is null at Microsoft.Office.Server.Search.Administration.SearchUpgradeProvisioner..ctor(SearchServiceInstance searchServiceInstance) at Microsoft.Office.Server.Search.Administration.OSSPrimaryGathererProject.ProvisionContentSources() 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bv High Initiating BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bx High Completed BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:45.84 OWSTIMER.EXE (0x0884) 0x08A8 SharePoint Portal Server SSO 8inc Medium In SSOService::Synch(), sso database conn string: 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqi Medium ExcelServerSharedWebApplication.Synchronize: Starting synchronize for instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqj Medium ExcelServerSharedWebApplication.Synchronize: Successfully synchronized instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:52.31 w3wp.exe (0x1E40) 0x0980 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/1963195510/Root-1-129188762904047141)

Read the article

Add keyboard languages to XP, Vista, and Windows 7

- by Matthew Guay

Do you regularly need to type in multiple languages in Windows? Here we’ll show you the easy way to add and change input languages to your keyboard in XP, Vista, and Windows 7. Windows Vista and 7 come preinstalled with support for viewing a wide variety of languages, so adding an input language is fairly simply. Adding an input language is slightly more difficult in XP, and requires installing additional files if you need an Asian or Complex script language. First we show how to add an input language in Windows Vista and 7; it’s basically the same in both versions. Then, we show how to add a language to XP, and also how to add Complex Script support. Please note that this is only for adding an input language, which will allow you to type in the language you select. This does not change your user interface language. Change keyboard language in Windows 7 and Vista It is fairly simple to add or change a keyboard language in Windows 7 or Vista. In Windows 7, enter “keyboard language” in the Start menu search box, and select “Change keyboards or other input methods”. In Windows Vista, open Control Panel and enter “input language” in the search box and select “Change keyboards or other input methods”. This also works in Windows 7. Now, click Change Keyboards to add another keyboard language or change your default one. Our default input language is US English, and our default keyboard is the US keyboard layout. Click Add to insert another input language while still leaving your default input language installed. Here we selected the standard Thai keyboard language (Thai Kedmanee), but you can select any language you want. Windows offers almost any language you can imagine, so just look for the language you want, select it, and click Ok. Alternately, if you want, you can click Preview to see your layout choice before accepting it. This is only the default characters, not ones that will be activated with Shift or other keys (many Asian languages use many more characters than English, and require the use of Shift and other keys to access them all). Once your finished previewing, click close and then press Ok on the previous dialog. Now you will see both of your keyboard languages in the Installed services box. You can click Add to go back and get more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Also, you can now change the default input language from the top menu. This is the language that your keyboard will start with when you boot your computer. So, if you mainly use English but also use another language, usually it is best to leave English as your default input language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages. Alternately you can switch input languages by pressing Alt+Shift on your keyboard. Some complex languages, such as Chinese, may have extra buttons to change input modes to accommodate their large alphabet. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and select the “Advanced Key Settings” tab. Here you can change settings for Caps Lock and change or add key sequences to change between languages. Also, the On-Screen keyboard will display the correct keyboard language (here the keyboard is displaying Thai), which can be a helpful reference if your physical keyboard doesn’t have your preferred input language printed on it. To open this, simply enter “On-Screen keyboard” in the start menu search, or click All Programs>Accessories>On-Screen keyboard. Change keyboard language in Windows XP The process for changing the keyboard language in Windows XP is slightly different. Open Control Panel, and select “Date, Time, Language, and Regional Options”. Select “Add other languages”. Now, click Details to add another language. XP does not include support for Asian and complex languages by default, so if you need to add one of those languages we have details for that below. Click Add to add an input language. Select your desired language from the list, and choose your desired keyboard layout if your language offers multiple layouts. Here we selected Canadian French with the default layout. Now you will see both of your keyboard languages in the Installed services box. You can click Add to go back and add more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages. Alternately you can switch input languages by pressing Alt+Shift on your keyboard. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and click the “Key Settings” button on the bottom of the dialog. Here you can change settings for Caps Lock and change or add key sequences to change between languages. Add support to XP for Asian and Complex script languages Windows XP does not include support for Asian and Complex script languages by default, but you can easily add them to your computer. This is useful if you wish to type in one of these languages, or simply want to read text written in these languages, since XP will not display these languages correctly if they are not installed. If you wish to install Chinese, Japanese, and/or Korean, check the “Install files for East Asian languages” box. Or, if you need to install a complex script language (including Arabic, Armenian, Georgian, Hebrew, the Indic languages, Thai, and Vietnamese), check the “Install files for complex script and right-to-left languages” box. Choosing either of these options will open a prompt reminding you that this option will take up more disk space. Support for complex languages will require around 10Mb of hard drive space, but East Asian language support may require 230 Mb or more free disk space. Click Ok, and click apply to install your language files. You may have to insert your XP CD into your CD drive to install these files. Insert the disk, and then click Ok. Windows will automatically copy the files, including fonts for these languages… …and then will ask you to reboot your computer to finalize the settings. Click Yes, and then reopen the “Add other languages” dialog when your computer is rebooted, and add a language as before. Now you can add Complex and/or Asian languages to XP, just as above. Here is the XP taskbar language selector with Thai installed. Conclusion Unfortunately we haven’t found a way to add Asian and complex languages in XP without having an XP disc. If you know of a way, let us know in the comments. (No downloading the XP disc from torrent site answers please) Adding an input language is very important for bilingual individuals, and can also be useful if you simply need to occasionally view Asian or Complex languages in XP. And by following the correct instructions for your version of Windows, it should be very easy to add, change, and remove input languages. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut ArticlesAnother Desktop Cube for Windows XP/VistaThe "Up" Keyboard Shortcut for Windows 7 or Vista ExplorerWhat is ctfmon.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

ASP.NET Podcast Show #148 - ASP.NET WebForms to build a Mobile Web Application

- by Wallym

Check the podcast site for the original url. This is the video and source code for an ASP.NET WebForms app that I wrote that is optimized for the iPhone and mobile environments. Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download M4V for iPhone/iPad. Download MP3. Link to iWebKit. Source Code: <%@ Page Title="MapSplore" Language="C#" MasterPageFile="iPhoneMaster.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="AT_iPhone_Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="Content" Runat="Server" ClientIDMode="Static"> <asp:ScriptManager ID="sm" runat="server" EnablePartialRendering="true" EnableHistory="false" EnableCdn="true" /> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script language="javascript" type="text/javascript">  </script> <asp:HiddenField ID="Latitude" runat="server" /> <asp:HiddenField ID="Longitude" runat="server" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js%22%3E%3C/script> <script language="javascript" type="text/javascript"> $(document).ready(function () { GetLocation(); setupMapDiv(); setupPlaceIveBeen(); }); function GetLocation() { if (navigator.geolocation != null) { navigator.geolocation.getCurrentPosition(getData); } else { var mess = document.getElementById('<%=Message.ClientID %>'); mess.innerHTML = "Sorry, your browser does not support geolocation. " + "Try the latest version of Safari on the iPhone, Android browser, or the latest version of FireFox."; } } function UpdateLocation_Click() { GetLocation(); } function getData(position) { var latitude = position.coords.latitude; var longitude = position.coords.longitude; var hdLat = document.getElementById('<%=Latitude.ClientID %>'); var hdLon = document.getElementById('<%=Longitude.ClientID %>'); hdLat.value = latitude; hdLon.value = longitude; } </script> <asp:Label ID="Message" runat="server" /> <asp:UpdatePanel ID="upl" runat="server"> <ContentTemplate> <asp:Panel ID="pnlStart" runat="server" Visible="true"> <div id="topbar"> <div id="title">MapSplore</div> </div> <div id="content"> <ul class="pageitem"> <li class="menu"> <asp:LinkButton ID="lbLocalDeals" runat="server" onclick="lbLocalDeals_Click"> <asp:Image ID="imLocalDeals" runat="server" ImageUrl="~/Images/ArtFavor_Money_Bag_Icon.png" Height="30" /> <span class="name">Local Deals.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbLocalPlaces" runat="server" onclick="lbLocalPlaces_Click"> <asp:Image ID="imLocalPlaces" runat="server" ImageUrl="~/Images/Andy_Houses_on_the_horizon_-_Starburst_remix.png" Height="30" /> <span class="name">Local Places.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbWhereIveBeen" runat="server" onclick="lbWhereIveBeen_Click"> <asp:Image ID="imImHere" runat="server" ImageUrl="~/Images/ryanlerch_flagpole.png" Height="30" /> <span class="name">I've been here.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbMyStats" runat="server"> <asp:Image ID="imMyStats" runat="server" ImageUrl="~/Images/Anonymous_Spreadsheet.png" Height="30" /> <span class="name">My Stats.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbAddAPlace" runat="server" onclick="lbAddAPlace_Click"> <asp:Image ID="imAddAPlace" runat="server" ImageUrl="~/Images/jean_victor_balin_add.png" Height="30" /> <span class="name">Add a Place.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="button"> <input type="button" value="Update Your Current Location" onclick="UpdateLocation_Click()"> </li> </ul> </div> </asp:Panel> <div> <asp:Panel ID="pnlCoupons" runat="server" Visible="false"> <div id="topbar"> <div id="title">MapSplore</div> <div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromDeals" OnClick="ReturnFromDeals_Click" /></div></div> <div class="content"> <asp:ListView ID="lvCoupons" runat="server"> <LayoutTemplate> <ul class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Place.Name") %>' OnClick="lbBusiness_Click"> <span class="comment"> <asp:Label ID="lblAddress" runat="server" Text='<%#Eval("Place.Address1") %>' /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Place.Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> </span> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView><asp:GridView ID="gvCoupons" runat="server" AutoGenerateColumns="false"> <HeaderStyle BackColor="Silver" /> <AlternatingRowStyle BackColor="Wheat" /> <Columns> <asp:TemplateField AccessibleHeaderText="Business" HeaderText="Business"> <ItemTemplate> <asp:Image ID="imPlaceType" runat="server" Text='<%#Eval("Type") %>' ImageUrl='<%#Eval("Image") %>' /> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Name") %>' OnClick="lbBusiness_Click" /> <asp:LinkButton ID="lblAddress" runat="server" Text='<%#Eval("Address1") %>' CssClass="smallText" /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> <asp:Label ID="lblInfo" runat="server" Visible="false" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </div> </asp:Panel> <asp:Panel ID="pnlPlaces" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromPlaces" OnClick="ReturnFromPlaces_Click" /></div></div> <div id="content"> <asp:ListView ID="lvPlaces" runat="server"> <LayoutTemplate> <ul id="ulPlaces" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> <li class="menu"> <asp:LinkButton ID="lbNotListed" runat="server" CssClass="name" OnClick="lbNotListed_Click"> Place not listed <span class="arrow"></span> </asp:LinkButton> </li> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbImHere" runat="server" CssClass="name" OnClick="lbImHere_Click"> <%#DisplayName(Eval("Name")) %>  <%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView> </div> </asp:Panel> <asp:Panel ID="pnlImHereNow" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Places" ID="lbImHereNowReturn" OnClick="lbImHereNowReturn_Click" /></div></div> <div id="rightbutton"> <asp:LinkButton runat="server" Text="Beginning" ID="lbBackToBeginning" OnClick="lbBackToBeginning_Click" /> </div> <div id="content"> <ul class="pageitem"> <asp:HiddenField ID="hdPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceLat" runat="server" /> <asp:HiddenField ID="hdPlaceLon" runat="server" /> <asp:HiddenField ID="hdPlaceTitle" runat="server" /> <asp:Button ID="btnImHereNow" runat="server" Text="I'm here" OnClick="btnImHereNow_Click" /> <asp:Label ID="lblPlaceTitle" runat="server" /><br /> <asp:TextBox ID="txtWhatsHappening" runat="server" TextMode="MultiLine" Rows="2" style="width:300px" /><br /> <div id="divImHere" style="width:300px; height:300px"></div> </div> </ul> </asp:Panel> <asp:Panel runat="server" ID="pnlIveBeenHere" Visible="false"> <div id="topbar"> <div id="title"> Where I've been</div><div id="leftbutton"> <asp:LinkButton ID="lbIveBeenHereBack" runat="server" Text="Back" OnClick="lbIveBeenHereBack_Click" /></div></div> <div id="content"> <asp:ListView ID="lvWhereIveBeen" runat="server"> <LayoutTemplate> <ul id="ulWhereIveBeen" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu" runat="server"> <asp:LinkButton ID="lbPlaceIveBeen" runat="server" OnClick="lbPlaceIveBeen_Click" CssClass="name"> <asp:Label ID="lblPlace" runat="server" Text='<%#Eval("PlaceName") %>' /> at <asp:Label ID="lblTime" runat="server" Text='<%#Eval("ATTime") %>' CssClass="content" /> <asp:HiddenField ID="hdATID" runat="server" Value='<%#Eval("ATID") %>' /> <span class="arrow"></span> </asp:LinkButton> </li> </ItemTemplate> </asp:ListView> </div> </asp:Panel> <asp:Panel runat="server" ID="pnlPlaceIveBeen" Visible="false"> <div id="topbar"> <div id="title"> I've been here </div> <div id="leftbutton"> <asp:LinkButton ID="lbPlaceIveBeenBack" runat="server" Text="Back" OnClick="lbPlaceIveBeenBack_Click" /> </div> <div id="rightbutton"> <asp:LinkButton ID="lbPlaceIveBeenBeginning" runat="server" Text="Beginning" OnClick="lbPlaceIveBeenBeginning_Click" /> </div> </div> <div id="content"> <ul class="pageitem"> <li> <asp:HiddenField ID="hdPlaceIveBeenPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLatitude" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLongitude" runat="server" /> <asp:Label ID="lblPlaceIveBeenName" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenAddress" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCity" runat="server" />, <asp:Label ID="lblPlaceIveBeenState" runat="server" /> <asp:Label ID="lblPlaceIveBeenZipCode" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCountry" runat="server" /><br /> <div id="divPlaceIveBeen" style="width:300px; height:300px"></div> </li> </ul> </div> </asp:Panel> <asp:Panel ID="pnlAddPlace" runat="server" Visible="false"> <div id="topbar"><div id="title">MapSplore</div><div id="leftbutton"><asp:LinkButton ID="lbAddPlaceReturn" runat="server" Text="Back" OnClick="lbAddPlaceReturn_Click" /></div><div id="rightnav"></div></div><div id="content"> <ul class="pageitem"> <li id="liPlaceAddMessage" runat="server" visible="false"> <asp:Label ID="PlaceAddMessage" runat="server" /> </li> <li class="bigfield"> <asp:TextBox ID="txtPlaceName" runat="server" placeholder="Name of Establishment" /> </li> <li class="bigfield"> <asp:TextBox ID="txtAddress1" runat="server" placeholder="Address 1" /> </li> <li class="bigfield"> <asp:TextBox ID="txtCity" runat="server" placeholder="City" /> </li> <li class="select"> <asp:DropDownList ID="ddlProvince" runat="server" placeholder="Select State" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtZipCode" runat="server" placeholder="Zip Code" /> </li> <li class="select"> <asp:DropDownList ID="ddlCountry" runat="server" onselectedindexchanged="ddlCountry_SelectedIndexChanged" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtPhoneNumber" runat="server" placeholder="Phone Number" /> </li> <li class="checkbox"> <span class="name">You Here Now:</span> <asp:CheckBox ID="cbYouHereNow" runat="server" Checked="true" /> </li> <li class="button"> <asp:Button ID="btnAdd" runat="server" Text="Add Place" onclick="btnAdd_Click" /> </li> </ul></div> </asp:Panel> <asp:Panel ID="pnlImHere" runat="server" Visible="false"> <asp:TextBox ID="txtImHere" runat="server" TextMode="MultiLine" Rows="3" Columns="40" /><br /> <asp:DropDownList ID="ddlPlace" runat="server" /><br /> <asp:Button ID="btnHere" runat="server" Text="Tell Everyone I'm Here" onclick="btnHere_Click" /><br /> </asp:Panel> </div> </ContentTemplate> </asp:UpdatePanel> </asp:Content> Code Behind .cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using LocationDataModel; public partial class AT_iPhone_Default : ViewStatePage{ private iPhoneDevice ipd; protected void Page_Load(object sender, EventArgs e) { LocationDataEntities lde = new LocationDataEntities(); if (!Page.IsPostBack) { var Countries = from c in lde.Countries select c; foreach (Country co in Countries) { ddlCountry.Items.Add(new ListItem(co.Name, co.CountryId.ToString())); } ddlCountry_SelectedIndexChanged(ddlCountry, null); if (AppleIPhone.IsIPad()) ipd = iPhoneDevice.iPad; if (AppleIPhone.IsIPhone()) ipd = iPhoneDevice.iPhone; if (AppleIPhone.IsIPodTouch()) ipd = iPhoneDevice.iPodTouch; } } protected void btnPlaces_Click(object sender, EventArgs e) { } protected void btnAdd_Click(object sender, EventArgs e) { bool blImHere = cbYouHereNow.Checked; string Place = txtPlaceName.Text, Address1 = txtAddress1.Text, City = txtCity.Text, ZipCode = txtZipCode.Text, PhoneNumber = txtPhoneNumber.Text, ProvinceId = ddlProvince.SelectedItem.Value, CountryId = ddlCountry.SelectedItem.Value; int iProvinceId, iCountryId; double dLatitude, dLongitude; DataAccess da = new DataAccess(); if ((!String.IsNullOrEmpty(ProvinceId)) && (!String.IsNullOrEmpty(CountryId))) { iProvinceId = Convert.ToInt32(ProvinceId); iCountryId = Convert.ToInt32(CountryId); if (blImHere) { dLatitude = Convert.ToDouble(Latitude.Value); dLongitude = Convert.ToDouble(Longitude.Value); da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber, dLatitude, dLongitude); } else { da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber); } liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Awesome, your place has been added. Add Another!"; txtPlaceName.Text = String.Empty; txtAddress1.Text = String.Empty; txtCity.Text = String.Empty; ddlProvince.SelectedIndex = -1; txtZipCode.Text = String.Empty; txtPhoneNumber.Text = String.Empty; } else { liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Please select a State and a Country."; } } protected void ddlCountry_SelectedIndexChanged(object sender, EventArgs e) { string CountryId = ddlCountry.SelectedItem.Value; if (!String.IsNullOrEmpty(CountryId)) { int iCountryId = Convert.ToInt32(CountryId); LocationDataModel.LocationDataEntities lde = new LocationDataModel.LocationDataEntities(); var prov = from p in lde.Provinces where p.CountryId == iCountryId orderby p.ProvinceName select p; ddlProvince.Items.Add(String.Empty); foreach (Province pr in prov) { ddlProvince.Items.Add(new ListItem(pr.ProvinceName, pr.ProvinceId.ToString())); } } else { ddlProvince.Items.Clear(); } } protected void btnImHere_Click(object sender, EventArgs e) { int i = 0; DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value), Lon = Convert.ToDouble(Longitude.Value); List<Place> lp = da.NearByLocations(Lat, Lon); foreach (Place p in lp) { ListItem li = new ListItem(p.Name, p.PlaceId.ToString()); if (i == 0) { li.Selected = true; } ddlPlace.Items.Add(li); i++; } pnlAddPlace.Visible = false; pnlImHere.Visible = true; } protected void lbImHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; ListViewItem lvi = (ListViewItem)(((LinkButton)sender).Parent); HiddenField hd = (HiddenField)lvi.FindControl("hdPlaceId"); long PlaceId = Convert.ToInt64(hd.Value); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); Place pl = da.GetPlace(PlaceId); pnlImHereNow.Visible = true; pnlPlaces.Visible = false; hdPlaceId.Value = PlaceId.ToString(); hdPlaceLat.Value = pl.Latitude.ToString(); hdPlaceLon.Value = pl.Longitude.ToString(); hdPlaceTitle.Value = pl.Name; lblPlaceTitle.Text = pl.Name; } protected void btnHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; string WhatsH = txtImHere.Text; long PlaceId = Convert.ToInt64(ddlPlace.SelectedValue); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsH, dLatitude, dLongitude); } protected void btnLocalCoupons_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); } protected void lbBusiness_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; GridViewRow gvr = (GridViewRow)(((LinkButton)sender).Parent.Parent); HiddenField hd = (HiddenField)gvr.FindControl("hdPlaceId"); string sPlaceId = hd.Value; Int64 PlaceId; if (!String.IsNullOrEmpty(sPlaceId)) { PlaceId = Convert.ToInt64(sPlaceId); } } protected void lbLocalDeals_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); pnlCoupons.Visible = true; pnlStart.Visible = false; List<GeoPromotion> lgp = da.NearByDeals(dLatitude, dLongitude); lvCoupons.DataSource = lgp; lvCoupons.DataBind(); } protected void lbLocalPlaces_Click(object sender, EventArgs e) { DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value); double Lon = Convert.ToDouble(Longitude.Value); List<LocationDataModel.Place> places = da.NearByLocations(Lat, Lon); lvPlaces.DataSource = places; lvPlaces.SelectedIndex = -1; lvPlaces.DataBind(); pnlPlaces.Visible = true; pnlStart.Visible = false; } protected void ReturnFromPlaces_Click(object sender, EventArgs e) { pnlPlaces.Visible = false; pnlStart.Visible = true; } protected void ReturnFromDeals_Click(object sender, EventArgs e) { pnlCoupons.Visible = false; pnlStart.Visible = true; } protected void btnImHereNow_Click(object sender, EventArgs e) { long PlaceId = Convert.ToInt32(hdPlaceId.Value); string UserName = Membership.GetUser().UserName; string WhatsHappening = txtWhatsHappening.Text; double UserLat = Convert.ToDouble(Latitude.Value); double UserLon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsHappening, UserLat, UserLon); } protected void lbImHereNowReturn_Click(object sender, EventArgs e) { pnlImHereNow.Visible = false; pnlPlaces.Visible = true; } protected void lbBackToBeginning_Click(object sender, EventArgs e) { pnlStart.Visible = true; pnlImHereNow.Visible = false; } protected void lbWhereIveBeen_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; pnlStart.Visible = false; pnlIveBeenHere.Visible = true; DataAccess da = new DataAccess(); lvWhereIveBeen.DataSource = da.UserATs(UserName, 0, 15); lvWhereIveBeen.DataBind(); } protected void lbIveBeenHereBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = false; pnlStart.Visible = true; } protected void lbPlaceIveBeen_Click(object sender, EventArgs e) { LinkButton lb = (LinkButton)sender; ListViewItem lvi = (ListViewItem)lb.Parent.Parent; HiddenField hdATID = (HiddenField)lvi.FindControl("hdATID"); Int64 ATID = Convert.ToInt64(hdATID.Value); DataAccess da = new DataAccess(); pnlIveBeenHere.Visible = false; pnlPlaceIveBeen.Visible = true; var plac = da.GetPlaceViaATID(ATID); hdPlaceIveBeenPlaceId.Value = plac.PlaceId.ToString(); hdPlaceIveBeenLatitude.Value = plac.Latitude.ToString(); hdPlaceIveBeenLongitude.Value = plac.Longitude.ToString(); lblPlaceIveBeenName.Text = plac.Name; lblPlaceIveBeenAddress.Text = plac.Address1; lblPlaceIveBeenCity.Text = plac.City; lblPlaceIveBeenState.Text = plac.Province.ProvinceName; lblPlaceIveBeenZipCode.Text = plac.ZipCode; lblPlaceIveBeenCountry.Text = plac.Country.Name; } protected void lbNotListed_Click(object sender, EventArgs e) { SetupAddPoint(); pnlPlaces.Visible = false; } protected void lbAddAPlace_Click(object sender, EventArgs e) { SetupAddPoint(); } private void SetupAddPoint() { double lat = Convert.ToDouble(Latitude.Value); double lon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); var zip = da.WhereAmIAt(lat, lon); if (zip.Count > 0) { var z0 = zip[0]; txtCity.Text = z0.City; txtZipCode.Text = z0.ZipCode; ddlProvince.ClearSelection(); if (z0.ProvinceId.HasValue == true) { foreach (ListItem li in ddlProvince.Items) { if (li.Value == z0.ProvinceId.Value.ToString()) { li.Selected = true; break; } } } } pnlAddPlace.Visible = true; pnlStart.Visible = false; } protected void lbAddPlaceReturn_Click(object sender, EventArgs e) { pnlAddPlace.Visible = false; pnlStart.Visible = true; liPlaceAddMessage.Visible = false; PlaceAddMessage.Text = String.Empty; } protected void lbPlaceIveBeenBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = true; pnlPlaceIveBeen.Visible = false; } protected void lbPlaceIveBeenBeginning_Click(object sender, EventArgs e) { pnlPlaceIveBeen.Visible = false; pnlStart.Visible = true; } protected string DisplayName(object val) { string strVal = Convert.ToString(val); if (AppleIPhone.IsIPad()) { ipd = iPhoneDevice.iPad; } if (AppleIPhone.IsIPhone()) { ipd = iPhoneDevice.iPhone; } if (AppleIPhone.IsIPodTouch()) { ipd = iPhoneDevice.iPodTouch; } return (iPhoneHelper.DisplayContentOnMenu(strVal, ipd)); }} iPhoneHelper.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; public enum iPhoneDevice{ iPhone, iPodTouch, iPad}/// <summary>/// Summary description for iPhoneHelper/// </summary>/// public class iPhoneHelper{ public iPhoneHelper() { // // TODO: Add constructor logic here // } // This code is stupid in retrospect. Use css to solve this problem public static string DisplayContentOnMenu(string val, iPhoneDevice ipd) { string Return = val; string Elipsis = "..."; int iPadMaxLength = 30; int iPhoneMaxLength = 15; if (ipd == iPhoneDevice.iPad) { if (Return.Length > iPadMaxLength) { Return = Return.Substring(0, iPadMaxLength - Elipsis.Length) + Elipsis; } } else { if (Return.Length > iPhoneMaxLength) { Return = Return.Substring(0, iPhoneMaxLength - Elipsis.Length) + Elipsis; } } return (Return); }} Source code for the ViewStatePage: using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls; /// <summary>/// Summary description for BasePage/// </summary>#region Base class for a page.public class ViewStatePage : System.Web.UI.Page{ PageStatePersisterToDatabase myPageStatePersister; public ViewStatePage() : base() { myPageStatePersister = new PageStatePersisterToDatabase(this); } protected override PageStatePersister PageStatePersister { get { return myPageStatePersister; } } }#endregion #region This class will override the page persistence to store page state in a database.public class PageStatePersisterToDatabase : PageStatePersister{ private string ViewStateKeyField = "__VIEWSTATE_KEY"; private string _exNoConnectionStringFound = "No Database Configuration information is in the web.config."; public PageStatePersisterToDatabase(Page page) : base(page) { } public override void Load() { // Get the cache key from the web form data System.Int64 key = Convert.ToInt64(Page.Request.Params[ViewStateKeyField]); Pair state = this.LoadState(key); // Abort if cache object is not of type Pair if (state == null) throw new ApplicationException("Missing valid " + ViewStateKeyField); // Set view state and control state ViewState = state.First; ControlState = state.Second; } public override void Save() { // No processing needed if no states available if (ViewState == null && ControlState != null) return; System.Int64 key; IStateFormatter formatter = this.StateFormatter; Pair statePair = new Pair(ViewState, ControlState); // Serialize the statePair object to a string. string serializedState = formatter.Serialize(statePair); // Save the ViewState and get a unique identifier back. key = SaveState(serializedState); // Register hidden field to store cache key in // Page.ClientScript does not work properly with Atlas. //Page.ClientScript.RegisterHiddenField(ViewStateKeyField, key.ToString()); ScriptManager.RegisterHiddenField(this.Page, ViewStateKeyField, key.ToString()); } private System.Int64 SaveState(string PageState) { System.Int64 i64Key = 0; string strConn = String.Empty, strProvider = String.Empty; string strSql = "insert into tblPageState ( SerializedState ) values ( '" + SqlEscape(PageState) + "');select scope_identity();"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); i64Key = Convert.ToInt64(sqlCm.ExecuteScalar()); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return i64Key; } private Pair LoadState(System.Int64 iKey) { string strConn = String.Empty, strProvider = String.Empty, SerializedState = String.Empty, strMinutesInPast = GetMinutesInPastToDelete(); Pair PageState; string strSql = "select SerializedState from tblPageState where tblPageStateID=" + iKey.ToString() + ";" + "delete from tblPageState where DateUpdated<DateAdd(mi, " + strMinutesInPast + ", getdate());"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); SerializedState = Convert.ToString(sqlCm.ExecuteScalar()); IStateFormatter formatter = this.StateFormatter; if ((null == SerializedState) || (String.Empty == SerializedState)) { throw (new ApplicationException("No ViewState records were returned.")); } // Deserilize returns the Pair object that is serialized in // the Save method. PageState = (Pair)formatter.Deserialize(SerializedState); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return PageState; } private string SqlEscape(string Val) { string ReturnVal = String.Empty; if (null != Val) { ReturnVal = Val.Replace("'", "''"); } return (ReturnVal); } private void GetDBConnectionString(ref string ConnectionStringValue, ref string ProviderNameValue) { if (System.Configuration.ConfigurationManager.ConnectionStrings.Count > 0) { ConnectionStringValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString; ProviderNameValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ProviderName; } else { throw new ConfigurationErrorsException(_exNoConnectionStringFound); } } private string GetMinutesInPastToDelete() { string strReturn = "-60"; if (null != System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"]) { strReturn = System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"].ToString(); } return (strReturn); }}#endregion AppleiPhone.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; /// <summary>/// Summary description for AppleIPhone/// </summary>public class AppleIPhone{ public AppleIPhone() { // // TODO: Add constructor logic here // } static public bool IsIPhoneOS() { return (IsIPad() || IsIPhone() || IsIPodTouch()); } static public bool IsIPhone() { return IsTest("iPhone"); } static public bool IsIPodTouch() { return IsTest("iPod"); } static public bool IsIPad() { return IsTest("iPad"); } static private bool IsTest(string Agent) { bool bl = false; string ua = HttpContext.Current.Request.UserAgent.ToLower(); try { bl = ua.Contains(Agent.ToLower()); } catch { } return (bl); }} Master page .cs: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls; public partial class MasterPages_iPhoneMaster : System.Web.UI.MasterPage{ protected void Page_Load(object sender, EventArgs e) { HtmlHead head = Page.Header; HtmlMeta meta = new HtmlMeta(); if (AppleIPhone.IsIPad() == true) { meta.Content = "width=400,user-scalable=no"; head.Controls.Add(meta); } else { meta.Content = "width=device-width, user-scalable=no"; meta.Attributes.Add("name", "viewport"); } meta.Attributes.Add("name", "viewport"); head.Controls.Add(meta); HtmlLink cssLink = new HtmlLink(); HtmlGenericControl script = new HtmlGenericControl("script"); script.Attributes.Add("type", "text/javascript"); script.Attributes.Add("src", ResolveUrl("~/Scripts/iWebKit/javascript/functions.js")); head.Controls.Add(script); cssLink.Attributes.Add("rel", "stylesheet"); cssLink.Attributes.Add("href", ResolveUrl("~/Scripts/iWebKit/css/style.css") ); cssLink.Attributes.Add("type", "text/css"); head.Controls.Add(cssLink); HtmlGenericControl jsLink = new HtmlGenericControl("script"); //jsLink.Attributes.Add("type", "text/javascript"); //jsLink.Attributes.Add("src", ResolveUrl("~/Scripts/jquery-1.4.1.min.js") ); //head.Controls.Add(jsLink); HtmlLink appleIcon = new HtmlLink(); appleIcon.Attributes.Add("rel", "apple-touch-icon"); appleIcon.Attributes.Add("href", ResolveUrl("~/apple-touch-icon.png")); HtmlMeta appleMobileWebAppStatusBarStyle = new HtmlMeta(); appleMobileWebAppStatusBarStyle.Attributes.Add("name", "apple-mobile-web-app-status-bar-style"); appleMobileWebAppStatusBarStyle.Attributes.Add("content", "black"); head.Controls.Add(appleMobileWebAppStatusBarStyle); } internal string FindPath(string Location) { string Url = Server.MapPath(Location); return (Url); }}

Read the article

Week in Geek: FBI Back Door in OpenBSD Edition

- by Asian Angel

This week we learned how to migrate bookmarks from Delicious to Diigo, fix annoying arrows, play old-school DOS games, schedule smart computer shutdowns, use breaks in Microsoft Word to better format documents, check the condition of hard-disks using Linux disk utilities, & what the Linux fstab is and how it works. Photo by Jameson42. Random Geek Links Another week with extra news link goodness to help keep you up to date. Photo by justmakeit. Report of FBI back door roils OpenBSD community Allegations that the FBI surreptitiously placed a back door into the OpenBSD operating system have alarmed the computer security community, prompting calls for an audit of the source code and claims that the charges must be a hoax. Fortinet: Job outlook improving for cybercrooks In an ironic twist in the job market, more positions will open up for developers who can write customized malware packers, people who can break CAPTCHA codes, and distributors who can spread malicious code, according to Fortinet. Enisa: Malware for smartphones is a ’serious risk’ Businesses and consumers are at risk of data breaches through smartphone use, according to the European Network and Information Security Agency. The trick with the f: Google and Microsoft web sites distribute malware Last week, Google’s DoubleClick advertising platform and Microsoft’s rad.msn.com online ad network briefly distributed malware to other web sites in the form of advertising banners. New scam tactic: Fake disk defraggers It would appear that scammers are trying out new programs to see which might best confuse potential victims and evade detection by legitimate antivirus software. Microsoft closes IE and Stuxnet holes As previously announced, Microsoft has released 17 security updates to close 40 security holes. All four Windows holes so far disclosed in connection with Stuxnet have now been closed. Microsoft Offers H.264 Support to Firefox on Windows via Add-On The new HTML5 Extension for Windows Media Player Firefox Plug-in add-on from Microsoft offers users that are running Firefox on Windows 7 H.264 support for HTML5 video playback. Google proclaims Chrome business-ready Google has announced that Chrome is ready for corporate use. Microsoft Tells Exchange Customers to Think Twice Before Opting for Google Message Continuity This week, Microsoft is telling companies still running Exchange 2010’s precursors that they should carefully consider the implications of embracing Google Message Continuity. Who Google has in mind for its Chrome OS users Steven Vaughan-Nichols explains why he feels that Chrome OS will be ideal for either office-workers or people who need a computer, but do not know the first thing about how to use one safely. Oracle takes office suite to the cloud Oracle has introduced Cloud Office 1.0, a cloud-based version of its office suite, which is aimed at web and mobile users. Mozilla pays premiums for reports of vulnerabilities The Mozilla Foundation has followed Google’s example by expanding its rewards program for reports of vulnerabilities in its Web applications. Who bought those 882 Novell patents? Not just Microsoft The mysterious CPTN Holdings — the organization that bought the 882 Novell patents as part of the terms of the Attachmate acquisition of Novell – has been unmasked (Microsoft, Apple, EMC and Oracle). Appeals court: Feds need warrants for e-mail Police must obtain search warrants before perusing Internet users’ e-mail records, a federal appeals court ruled today in a landmark decision that struck down part of a 1986 law allowing warrantless access. Geek Video of the Week What happens when someone plays a wicked prank by shoveling crazy snow paths that lead to dead ends or turn back on themselves? Watch to find out! Photo by CollegeHumor. Janitor Snow Shoveling Prank Random TinyHacker Links The Oatmeal on Cat vs Internet What lengths will our poor neglected kitty hero have to go to in order to get some attention? Guide On Using JoliCloud With Windows JoliCloud is a nifty operating system that’s made for people who need a light-weight OS that’s mostly cloud based. Check this guide on using it with Windows. Use Cameyo to Easily Create Portable Programs Here’s a nifty tool to make portable apps out of programs in Windows. Check out the guide to do it. Better Family Tech Support A nice new site by Google to help members of family understand how computers work. Track Your Stolen Mobile Phone With F-Secure A useful anti-theft tool for your mobile phone. Super User Questions Another week with great answers to popular questions from Super User. What Chrome password manager fits my requirements? What’s the best way to be able to reimage windows computers? Could you suggest feature-rich disk-based personal backup program for linux (and I’ve seen a few)? What is IPv6 and why should I care? Is there any way to find out what programs are trying to connect to Internet on windows? How-To Geek Weekly Article Recap Here are our hottest articles full of geeky goodness from this past week at HTG. 20 OS X Keyboard Shortcuts You Might Not Know Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Is Your Desktop Printer More Expensive Than Printing Services? Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.? The Twelve Days of Geekmas One Year Ago on How-To Geek Enjoy reading through our latest batch of retro-geek goodness from one year ago. Macrium Reflect is a Free and Easy To Use Backup Utility How To Turn a Physical Computer Into A Virtual Machine with Disk2vhd How To Restore Windows 7 from a System Image How To Manage Hard Drive Space Used by Windows 7 Backup and Restore How To Manage Hibernate Mode in Windows 7 The Geek Note That is all we have for you this week, so see you back here again after the holidays! Got a great tip? Send it in to us at [email protected]. Photo by mitjamavsar. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

Read the article

Tips on installing Visual Studio 2010 SP1

- by Jon Galloway

Visual Studio SP1 went up on MSDN downloads (here) on March 8, and will be released publicly on March 10 here. Release announcements: Soma: Visual Studio 2010 enhancements Jason Zander: Announcing Visual Studio 2010 Service Pack 1 I started on this post with tips on installing VS2010 SP1 when I realized I’ve been writing these up for Visual Studio and .NET framework SP releases for a while (e.g. VS2008 / .NET 3.5 SP1 post, VS2005 SP1 post). Looking back the years of Visual Studio SP installs (and remembering when we’d get up to SP6 for a Visual Studio release), I’m happy to see that it just keeps getting easier. Service Packs are a lot less finicky about requiring beta software to be uninstalled, install more quickly, and are just generally a lot less scary. If I can’t have a jetpack, at least my future provided me faster, easier service packs. Disclaimer: These tips are just general things I've picked up over the years. I don't have any inside knowledge here. If you see anything wrong, be sure to let me know in the comments. You may want to check the readme file before installing - it's short, and it's in that new-fangled HTML format. On with the tips! Before starting, uninstall Visual Studio features you don't use Visual Studio service packs (and other Microsoft service packs as well) install patches for the specific features you’ve got installed. This is a big reason to always do a custom install when you first install Visual Studio, but it’s not difficult to update your existing installation. Here’s the quick way to do that: Tap the windows key and type “add or remove programs” and press enter (or click on the “Add or remove programs” link if you must). Type “Visual Studio 2010” in the search box in the upper right corner, click on the Visual Studio program (the one with the VS infinity looking logo) and click on Uninstall/Change. Click on Add or Remove Features The next part’s up to you – what features do you actually use? I’ve been doing primarily ASP.NET MVC development in C# lately, so I selected Visual C# and Visual Web Developer. Remember that you can install features later if needed, and can also install the express versions if you want. Selecting everything just because it’s there - or you paid for it – means that you install updates for everything, every time. When you’ve made your changes, click on the Update button to uninstall unused features. Shut down all instances of Visual Studio It probably goes without saying that you should close a program down before installing it, partly to avoid the file-in-use-reboot-after-install horror. Additional "hunch / works on my machine" quality tip: On one computer I saw a note in the setup log about Visual Studio a prompt for user input to close Visual Studio, although I never saw the prompt. Just to be sure, I'd personally open up Task Manager and kill any devenv.exe processes I saw running, as it couldn't hurt. Use the web installer I use the Web Installers whenever possible. There’s no point in downloading the DVD unless you’re doing multiple installs or won’t have internet access. The DVD IS is 1.5GB, since it needs to be able to service every possible supported installation option on both x86 and x64. The web installer is 776 KB (smaller than calc.exe), so you can start the installation right away. Like other web installers, the real benefit is that it only installs the updates you need (hence the reason for step 1 – uninstalling unused components). Instead of 1.5GB, my download was roughly 530MB. If you’re installing from MSDN (this link takes you right to the Visual Studio installs), select the first one on the list: The first step in the installation process is to analyze the machine configuration and tell you what needs to be installed. Since I've trimmed down my features, that's a pretty short list. The time's not far off where I may not install SQL Server on my dev machines, just using SQL Server Compact - that would shorten the list further. When I hit next, you can see that the download size has shrunk considerably. When I start the install, note that the installation begins while other components are downloading - another benefit of the web install. On my mid-range desktop machine, the install took 25 minutes. What if it takes longer? According to Heath Stewart (Visual Studio installer guru), average SP1 installs take roughly 45 minutes. An installation which takes hours to complete may be a sign of a problem: see his post Visual Studio 2010 Service Pack 1 installing for over 2 hours could be a sign of a problem. Why so long? Yes, even 25 minutes is a while. Heath's got another blog post explaining why the update can take longer than the initial install (see: A patch may take as long or longer to install than the target product) which explains all the additional steps and complexities a patch needs to deal with, as well as some mitigation steps that deployment authors can take to mitigate the impact. Other things to know about Visual Studio 2010 SP1 Installs over Visual Studio 2010 SP1 Beta That's nice. Previous Visual Studio versions did a number of annoying things when you installed SP's over beta's - fail with weird errors, get part way through and tell you needed to cancel and uninstall first, etc. I've installed this on two machines that had random beta stuff installed without tears. That Readme file you didn't read I mentioned the readme file earlier (http://go.microsoft.com/fwlink/?LinkId=210711 ). Some interesting things I picked up in there: 2.1.3. Visual Studio 2010 Service Pack 1 installation may fail when a USB drive or other removeable drive is connected 2.1.4. Visual Studio must be restarted after Visual Studio 2010 SP1 tooling for SQL Server Compact (Compact) 4.0 is installed 2.2.1. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled to restore certain components 2.2.2. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled before SP1 can be installed again 2.4.3.1. Async CTP If you installed the pre-SP1 version of Async CTP but did not uninstall it before you installed Visual Studio 2010 SP1, then your computer will be in a state in which the version of the C# compiler in the .NET Framework does not match the C# compiler in Visual Studio. To resolve this issue: After you install Visual Studio 2010 SP1, reinstall the SP1 version of the Async CTP from here. Hardware acceleration for Visual Studio is disabled on Windows XP Visual Studio 2010 SP1 disables hardware acceleration when running on Windows XP (only on XP). You can turn it back on in the Visual Studio options, under Environment / General, as shown below. See Jason Zander's post titled Performance Troubleshooting Article and VS2010 SP1 Change.

Read the article

Week in Geek: US Govt E-card Scam Siphons Confidential Data Edition

- by Asian Angel

This week we learned how to “back up photos to Flickr, automate repetitive tasks, & normalize MP3 volume”, enable “stereo mix” in Windows 7 to record audio, create custom papercraft toys, read up on three alternatives to Apple’s flaky iOS alarm clock, decorated our desktops & app docks with Google icon packs, and more. Photo by alexschlegel. Random Geek Links It has been a busy week on the security & malware fronts and we have a roundup of the latest news to help keep you updated. Photo by TopTechWriter.US. US govt e-card scam hits confidential data A fake U.S. government Christmas e-card has managed to siphon off gigabytes of sensitive data from a number of law enforcement and military staff who work on cybersecurity matters, many of whom are involved in computer crime investigations. Security tool uncovers multiple bugs in every browser Michal Zalewski reports that he discovered the vulnerability in Internet Explorer a while ago using his cross_fuzz fuzzing tool and reported it to Microsoft in July 2010. Zalewski also used cross_fuzz to discover bugs in other browsers, which he also reported to the relevant organisations. Microsoft to fix Windows holes, but not ones in IE Microsoft said that it will release two security bulletins next week fixing three holes in Windows, but it is still investigating or working on fixing holes in Internet Explorer that have been reportedly exploited in attacks. Microsoft warns of Windows flaw affecting image rendering Microsoft has warned of a Windows vulnerability that could allow an attacker to take control of a computer if the user is logged on with administrative rights. Windows 7 Not Affected by Critical 0-Day in the Windows Graphics Rendering Engine While confirming that details on a Critical zero-day vulnerability have made their way into the wild, Microsoft noted that customers running the latest iteration of Windows client and server platforms are not exposed to any risks. Microsoft warns of Office-related malware Microsoft’s Malware Protection Center issued a warning this week that it has spotted malicious code on the Internet that can take advantage of a flaw in Word and infect computers after a user does nothing more than read an e-mail. *Refers to a flaw that was addressed in the November security patch releases. Make sure you have all of the latest security updates installed. Unpatched hole in ImgBurn disk burning application According to security specialist Secunia, a highly critical vulnerability in ImgBurn, a lightweight disk burning application, can be used to remotely compromise a user’s system. Hole in VLC Media Player Virtual Security Research (VSR) has identified a vulnerability in VLC Media Player. In versions up to and including 1.1.5 of the VLC Media Player. Flash Player sandbox can be bypassed Flash applications run locally can read local files and send them to an online server – something which the sandbox is supposed to prevent. Chinese auction site touts hacked iTunes accounts Tens of thousands of reportedly hacked iTunes accounts have been found on Chinese auction site Taobao, but the company claims it is unable to take action unless there are direct complaints. What happened in the recent Hotmail outage Mike Schackwitz explains the cause of the recent Hotmail outage. DOJ sends order to Twitter for Wikileaks-related account info The U.S. Justice Department has obtained a court order directing Twitter to turn over information about the accounts of activists with ties to Wikileaks, including an Icelandic politician, a legendary Dutch hacker, and a U.S. computer programmer. Google gets court to block Microsoft Interior Department e-mail win The U.S. Federal Claims Court has temporarily blocked Microsoft from proceeding with the $49.3 million, five-year DOI contract that it won this past November. Google Apps customers get email lockdown Companies and organisations using Google Apps are now able to restrict the email access of selected users. LibreOffice Is the Default Office Suite for Ubuntu 11.04 Matthias Klose has announced some details regarding the replacement of the old OpenOffice.org 3.2.1 packages with the new LibreOffice 3.3 ones, starting with the upcoming Ubuntu 11.04 (Natty Narwhal) Alpha 2 release. Sysadmin Geek Tips Photo by Filomena Scalise. How to Setup Software RAID for a Simple File Server on Ubuntu Do you need a file server that is cheap and easy to setup, “rock solid” reliable, and has Email Alerting? This tutorial shows you how to use Ubuntu, software RAID, and SaMBa to accomplish just that. How to Control the Order of Startup Programs in Windows While you can specify the applications you want to launch when Windows starts, the ability to control the order in which they start is not available. However, there are a couple of ways you can easily overcome this limitation and control the startup order of applications. Random TinyHacker Links Using Opera Unite to Send Large Files A tutorial on using Opera Unite to easily send huge files from your computer. WorkFlowy is a Useful To-do List Tool A cool to-do list tool that lets you integrate multiple tasks in one single list easily. Playing Flash Videos on iOS Devices Yes, you can play flash videos on jailbroken iPhones. Here’s a tutorial. Clear Safari History and Cookies On iPhone A tutorial on clearing your browser history on iPhone and other iOS devices. Monitor Your Internet Usage Here’s a cool, cross-platform tool to monitor your internet bandwidth. Super User Questions See what the community had to say on these popular questions from Super User this week. Why is my upload speed much less than my download speed? Where should I find drivers for my laptop if it didn’t come with a driver disk? OEM Office 2010 without media – how to reinstall? Is there a point to using theft tracking software like Prey on my laptop, if you have login security? Moving an “all-in-one” PC when turned on/off How-To Geek Weekly Article Recap Get caught up on your HTG reading with our hottest articles from this past week. How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk How To Boot 10 Different Live CDs From 1 USB Flash Drive What is Camera Raw, and Why Would a Professional Prefer it to JPG? Did You Know Facebook Has Built-In Shortcut Keys? The How-To Geek Guide to Audio Editing: The Basics One Year Ago on How-To Geek Enjoy looking through our latest gathering of retro article goodness. Learning Windows 7: Create a Homegroup & Join a New Computer To It How To Disconnect a Machine from a Homegroup Use Remote Desktop To Access Other Computers On a Small Office or Home Network How To Share Files and Printers Between Windows 7 and Vista Allow Users To Run Only Specified Programs in Windows 7 The Geek Note That is all we have for you this week and we hope your first week back at work or school has gone very well now that the holidays are over. Know a great tip? Send it in to us at [email protected]. Photo by Pamela Machado. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

Read the article

Test All Features of Windows Phone 7 On Your PC

- by Matthew Guay

Are you developer or just excited about the upcoming Windows Phone 7, and want to try it out now? Thanks to free developer tools from Microsoft and a new unlocked emulator rom, you can try out most of the exciting features today from your PC. Last week we showed you how to try out Windows Phone 7 on your PC and get started developing for the upcoming new devices. We noticed, however, that the emulator only contains Internet Explorer Mobile and some settings. This is still interesting to play around with, but it wasn’t the full Windows Phone 7 experience. Some enterprising tweakers discovered that more applications were actually included in the emulator, but were simply hidden from users. Developer Dan Ardelean then figured out how to re-enable these features, and released a tweaked emulator rom so everyone can try out all of the Windows Phone 7 features for themselves. Here we’ll look at how you can run this new emulator image on your PC, and then look at some interesting features in Windows Phone 7. Editor Note: This modified emulator image is not official, and isn’t sanctioned by Microsoft. Use your own judgment when choosing to download and use the emulator. Setting Up Emulator Rom To test-drive Windows Phone 7 on your PC, you must first download and install the Windows Phone Developer Tools CTP (link below). Follow the steps we showed you last week at: Try out Windows Phone 7 on your PC today. Once it’s installed, go ahead and run the default emulator as we showed to make sure everything works ok. Once the Windows Phone Developer Tools are installed and running, download the new emulator rom from XDA Forums (link below). This will be a zip file, so extract it first. Note where you save the file, as you will need the address in the next step. Now, to run our new emulator image, we need to open the emulator in command line and point to the new rom image. To do this, browse to the correct directory, depending on whether you’re running the 32 bit or 64 bit version of Windows: 32 bit: C:\Program Files\Microsoft XDE\1.0\ 64 bit: C:\Program Files (x86)\Microsoft XDE\1.0\ Hold your Shift key down and right-click in the folder. Choose Open Command Window here. At the command prompt, enter XDE.exe followed by the location of your new rom image. Here, we downloaded the rom to our download folder, so at the command prompt we entered: XDE.exe C:\Users\Matthew\Downloads\WM70Full\WM70Full.bin The emulator loads … with the full Windows Phone 7 experience! To make it easier, let’s make a shortcut on our desktop to load the emulator with the new rom directly. Right-click on your desktop (or any folder you want to create the shortcut in), select New, and then Shortcut. Now, in the box, we need to enter the path for the emulator followed by the location of our rom. Both items must be in quotes. So, in our test, we entered the following: 32 bit: “C:\Program Files\Microsoft XDE\1.0\” “C:\Users\Matthew\Downloads\WM70Full\WM70Full.bin” 64 bit: “C:\Program Files (x86)\Microsoft XDE\1.0\” “C:\Users\Matthew\Downloads\WM70Full\WM70Full.bin” Make sure to enter the correct location of the new emulator rom for your computer, and keep both items in separate quotes. Click next when you’ve entered the location. Name the shortcut; we named it Windows Phone 7, but simply enter whatever you’d like. Click Finish when you’re done. You should now have a nice Windows Phone icon and your fully functional shortcut! Double-click it to run the Windows Phone 7 emulator as above. Features in the Unlocked Windows Phone 7 Emulator So let’s look at what you can do with this new emulator. Almost everything you’ve seen in demos from the Mobile World Conference and Mix’10 are right here for you to play with. Here’s the application menu, which you can access by clicking on the arrow on the top of the home screen, which shows how much stuff they’ve got in this! And, of course, even the home screen itself shows much more activity than it did in the original emulator. Let’s check out some of these sections. Here’s Zune running on Windows Phone 7, and the Zune Marketplace. The animations are beautiful, so be sure to check this out yourself. The new picture hub is much nicer than any picture viewer included with Windows Mobile in the past… Stay productive, and on schedule with the new Calendar. The XBOX hub gives us only a hint of things to come, and the links to games now are simply placeholders. Here’s a look at the Office hub. This doesn’t show up on the homescreen right now, but you can access it in the applications menu. Office obviously still has a lot of work left on it, but even at a glance here it looks like it includes a lot more functionality than Office Mobile in Windows Mobile 6. Here’s a look at each of the three apps: Word, Excel, and OneNote, and the formatting pallet in Office apps. This emulator also includes a lot more settings than the default one, including settings for individual applications. You can even activate the screen lock, and try out the lift-to-peek-or-unlock feature… Finally, this version of Windows Phone 7 includes a very nice SystemInfo app with an advanced task manager. We hope this is still available when the actual phones are released. Conclusion If you’re excited about the upcoming Windows Phone 7 series, or simply want to learn more about what’s coming, this is a great way to test it out. With these exciting new hubs and applications, there’s something here for everyone. Let us know what you like most about Windows Phone 7 and what your favorite app or hub is. Links Please note: These roms are not officially supported by Microsoft, and could be taken down. Download the unlocked Windows Phone 7 emulator from XDA Forums – click the link in this post to download How the unlocked emulator image was created Similar Articles Productive Geek Tips Try out Windows Phone 7 on your PC todayGet stats on your Ruby on Rails codeDisable Windows Vista’s Built-in CD/DVD Burning FeaturesWeek in Geek – The Slick Windows 7 File Copy Animation EditionGeek Fun: Virtualized Old School Windows – Windows 95 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10

Read the article

Issue 15: The Benefits of Oracle Exastack

- by rituchhibber

SOLUTIONS FOCUS The Benefits of Oracle Exastack Paul ThompsonDirector, Alliances and Solutions Partner ProgramsOracle EMEA Alliances & Channels RESOURCES -- Oracle PartnerNetwork (OPN) Oracle Exastack Program Oracle Exastack Ready Oracle Exastack Optimized Oracle Exastack Labs and Enablement Resources Oracle Exastack Labs Video Tour SUBSCRIBE FEEDBACK PREVIOUS ISSUES Exastack is a revolutionary programme supporting Oracle independent software vendor partners across the entire Oracle technology stack. Oracle's core strategy is to engineer software and hardware together, and our ISV strategy is the same. At Oracle we design engineered systems that are pre-integrated to reduce the cost and complexity of IT infrastructures while increasing productivity and performance. Oracle innovates and optimises performance at every layer of the stack to simplify business operations, drive down costs and accelerate business innovation. Our engineered systems are optimised to achieve enterprise performance levels that are unmatched in the industry. Faster time to production is achieved by implementing pre-engineered and pre-assembled hardware and software bundles. Our strategy of delivering a single-vendor stack simplifies and reduces costs associated with purchasing, deploying, and supporting IT environments for our customers and partners. In parallel to this core engineered systems strategy, the Oracle Exastack Program enables our Oracle ISV partners to leverage a scalable, integrated infrastructure that delivers their applications tuned, tested and optimised for high-performance. Specifically, the Oracle Exastack Program helps ISVs run their solutions on the Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4 - integrated systems products in which the software and hardware are engineered to work together. These products provide OPN members with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Ready and Optimized Oracle Partners can now leverage our new Oracle Exastack Program to become Oracle Exastack Ready and Oracle Exastack Optimized. Partners can achieve Oracle Exastack Ready status through their support for Oracle Solaris, Oracle Linux, Oracle VM, Oracle Database, Oracle WebLogic Server, Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. By doing this, partners can demonstrate to their customers that their applications are available on the latest major releases of these products. The Oracle Exastack Ready programme helps customers readily differentiate Oracle partners from lesser software developers, and identify applications that support Oracle engineered systems. Achieving Oracle Exastack Optimized status demonstrates that an OPN member has proven itself against goals for performance and scalability on Oracle integrated systems. This status enables end customers to readily identify Oracle partners that have tested and tuned their solutions for optimum performance on an Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, and Oracle SPARC SuperCluster T4-4. These ISVs can display the Oracle Exadata Optimized, Oracle Exalogic Optimized or Oracle SPARC SuperCluster Optimized logos on websites and on all their collateral to show that they have tested and tuned their application for optimum performance. Deliver higher value to customers Oracle's investment in engineered systems enables ISV partners to deliver higher value to customer business processes. New innovations are enabled through extreme performance unachievable through traditional best-of-breed multi-vendor server/software approaches. Core product requirements can be launched faster, enabling ISVs to focus research and development investment on core competencies in order to bring value to market as quickly as possible. Through Exastack, partners no longer have to worry about the underlying product stack, which allows greater focus on the development of intellectual property above the stack. Partners are not burdened by platform issues and can concentrate simply on furthering their applications. The advantage to end customers is that partners can focus all efforts on business functionality, rather than bullet-proofing underlying technologies, and so will inevitably deliver application updates faster. Exastack provides ISVs with a number of flexible deployment options, such as on-premise or Cloud, while maintaining one single code base for applications regardless of customer deployment preference. Customers buying their solutions from Exastack ISVs can therefore be confident in deploying on their own networks, on private clouds or into a public cloud. The underlying platform will support all conceivable deployments, enabling a focus on the ISV's application itself that wouldn't be possible with other vendor partners. It stands to reason that Exastack accelerates time to value as well as lowering implementation costs all round. There is a big competitive advantage in partners being able to offer customers an optimised, pre-configured solution rather than an assortment of components and a suggested fit. Once a customer has decided to buy an Oracle Exastack Ready or Optimized partner solution, it will be up and running without any need for the customer to conduct testing of its own. Operational costs and complexity are also reduced, thanks to streamlined customer support through standardised configurations and pro-active monitoring. 'Engineered to Work Together' is a significant statement of Oracle strategy. It guarantees smoother deployment of a single vendor solution, clear ownership with no finger-pointing and the peace of mind of the Oracle Support Centre underpinning the entire product stack. Next steps Every OPN member with packaged applications must seriously consider taking steps to become Exastack Ready, or Exastack Optimized at the first opportunity. That first step down the track is to talk to an expert on the OPN Portal, at the Oracle Partner Business Center or to discuss the next steps with the closest Oracle account manager. Oracle Exastack lab environments and other technical enablement resources are available for OPN members wishing to further their knowledge of Oracle Exastack and qualify their applications for Oracle Exastack Optimized. New Boot Camps and Guided Learning Paths (GLPs), tailored specifically for ISVs, are available for Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle Linux, Oracle Solaris, Oracle Database, and Oracle WebLogic Server. More information about these GLPs and Boot Camps (including delivery dates and locations) are posted on the OPN Competency Center and corresponding OPN Knowledge Zones. Learn more about Oracle Exastack labs and ISV specific enablement resources. "Oracle Specialized partners are of course front-and-centre, with potential customers clearly directed to those partners and to Exadata Ready partners as a matter of priority." --More OpenWorld 2011 highlights for Oracle partners and customers Oracle Application Testing Suite 9.3 application testing solution for Web, SOA and Oracle Applications Oracle Application Express Release 4.1 improving the development of database-centric Web 2.0 applications and reports Oracle Unified Directory 11g helping customers manage the critical identity information that drives their business applications Oracle SOA Suite for healthcare integration Oracle Enterprise Pack for Eclipse 11g demonstrating continued commitment to the developer and open source communities Oracle Coherence 3.7.1, the latest release of the industry's leading distributed in-memory data grid Oracle Process Accelerators helping to simplify and accelerate time-to-value for customers' business process management initiatives Oracle's JD Edwards EnterpriseOne on the iPad meeting the increasingly mobile demands of today's workforces Oracle CRM On Demand Release 19 Innovation Pack introducing industry-leading hosted call centre and enterprise-marketing capabilities designed to drive further revenue and productivity while reducing costs and improving the customer experience Oracle's Primavera Portfolio Management 9 for businesses delivering on project portfolio goals with increased versatility, transparency and accuracy Oracle's PeopleSoft Human Capital Management (HCM) 9.1 On Demand Standard Edition helping customers manage their long-term investment in enterprise-wide business applications New versions of Oracle FLEXCUBE Universal Banking and Oracle FLEXCUBE Investor Servicing for Financial Institutions, as well as Oracle Financial Services Enterprise Case Management, Oracle Financial Services Pricing Management, Oracle Financial Management Analytics and Oracle Tax Analytics Oracle Utilities Network Management System 1.11 offering new modelling and analysis features to improve distribution-grid management for electric utilities Oracle Communications Network Charging and Control 4.4 helping communications service providers (CSPs) offer their customers more flexible charging options Plus many, many more technology announcements, enhancements, momentum news and community updates -- Oracle OpenWorld 2012 A date has already been set for Oracle OpenWorld 2012. Held once again in San Francisco, exhibitors, partners, customers and Oracle people will gather from 30 September until 4 November to meet, network and learn together with the rest of the global Oracle community. Register now for Oracle OpenWorld 2012 and save $$$! We'll reward your early planning for Oracle OpenWorld 2012 with reduced rates. Super Saver deals are now available! -- Back to the welcome page

Read the article

SQLAuthority News – Pluralsight Course Review – Practices for Software Startups – Part 1 of 2

- by pinaldave

This is first part of the two part series of Practices for Software Startup Pluralsight Course. The course is written by Stephen Forte (Blog | Twitter). Stephen Forte is the Chief Strategy Officer of the venture backed company, Telerik, a leading vendor of developer and team productivity tools. Stephen is also a Certified Scrum Master, Certified Scrum Professional, PMP, and also speaks regularly at industry conferences around the world. He has written several books on application and database development. Stephen is also a board member of the Scrum Alliance. Startups – Everybodies Dream Start-up companies are an important topic right now – everyone wants to start their own business. It is also important to remember that all companies were a start up at one point – from your corner store to the giants like Microsoft and Apple. Research proves that not every start-up succeeds, in fact, most will fail before their first year. There are many reasons for this, and this could be due to the fact that there are many stages to a start-up company, and stumbling at any of these stages can lead to failure. It is important to understand what makes a start-up company succeed at all its hurdles to become successful. It is even important to define success. For most start-ups this would mean becoming their own independently functioning company or to be bought out for a hefty profit by a larger company. The idea of making a hefty profit by living your dream is extremely important, and you can even think of start-ups as the new craze. That’s why studying them is so important – they are very popular, but things have changed a lot since their inception. Starting the Startups Beginning a start-up company used to be difficult, but now facilities and information is widely available, and it is much easier. But that means it is much easier to fail, also. Previously to start your own company, everything was planned and organized, resources were ensured and backed up before beginning; even the idea of starting your own business was a big thing. Now anybody can do it, and the steps are simple and outlines everywhere – you can get online software and easily outsource , cloud source, or crowdsource a lot of your material. But without the type of planning previously required, things can often go badly. New Products – New Ideas – New World There are so many fantastic new products, but they don’t reach success all the time. I find start-up companies very interesting, and whenever I meet someone who is interested in the subject or already starting their own company, I always ask what they are doing, their plans, goals, market, etc. I am sorry to say that in most cases, they cannot answer my questions. It is true that many fantastic ideas fail because of bad decisions. These bad decisions were not made intentionally, but people were simply unaware of what they should be doing. This will always lead to failure. But I am happy to say that all these issues can be gone because Pluralsight is now offering a course all about start-ups by Stephen Forte. Stephen is a start up leader. He has successfully started many companies and most are still going strong, or have gone on to even bigger and better things. Beginning Course on Startup I have always thought start-ups are a fascinating subject, and decided to take his course, but it is three hours long. This would be hard to fit into my busy work day all at once, so I decided to do half of his course before my daughter wakes up, and the other half after she goes to sleep. The course is divided into six modules, so this would be easy to do. I began the first chapter early in the morning, at 5 am. Stephen jumped right into the middle of the subject in the very first module – designing your business plan. The first question you will have to answer to yourself, to others, and to investors is: What is your product and when will we be able to see it? So a very important concept is a “minimal viable product.” This means setting goals for yourself and your product. We all have large dreams, but your minimal viable product doesn’t have to be your final vision at the very first. For example: Apple is a giant company, but it is still evolving. Steve Jobs didn’t envision the iPhone 6 at the very beginning. He had to start at the first iPhone and do his market research, and the idea evolved into the technology you see now. So for yourself, you should decide a beginning and stop point. Do your market research. Determine who you want to reach, what audience you want for your product. You can have a great idea that simply will not work in the market, do need, bottlenecks, lack of resources, or competition. There is a lot of research that needs to be done before you even write a business plan, and Stephen covers it in the very first chapter. The Team – Unique Key to Success After jumping right into the subject in the very first module, I wondered what Stephen could have in store for me for the rest of the course. Chapter number two is building a team. Having a team is important regardless of what your startup is. You can be a true visionary with endless ideas and energy, but one person can still not do everything. It is important to decide from the very beginning if you will have cofounders, team leaders, and how many employees you’ll need. Even more important, you’ll need to decide what kind of team you want – what personalities, skills, and type of energy you want each of your employees to bring. Do you want to have an A+ team with a B- idea, or do you have a B- idea that needs an A+ team to sell it? Stephen asks all the hard questions! I was especially impressed by his insight on developing. You have to decide if you need developers, how many, and what their skills should be. I found this insight extremely useful for everyday usage, not just for start-up companies. I would apply this kind of information in management at any position. An amazing team will build an amazing product – and that doesn’t matter if you’re a start-up company or a small team working for a much larger business. Customer Development – The Ultimate Obective Chapter three was about customer development. According to Stephen, there are four different steps to develop a customer base. The first question to ask yourself is if you are envisioning a large customer base buying a few products each, or a small, dedicated base that buys a lot of your product – quantity vs. Quality. He also discusses how to earn, retain, and get more customers. He also says that each customer should be placed in a different role – some will be like investors, who regularly spend with you and invest their money in your business. It is then your job to take that investment and turn it into a better product in the future. You need to deal with their money properly – think of it is as theirs as investors, not yours as profit. At the end of this module I felt that only Stephen could provide this kind of insight, and then he listed all the resources he took his information from. I have never seen a group of people so passionate about their customers. It was indeed a long day for me. In tomorrow’s part 2 we will discuss rest of the three module and also will see a quick video of the Practices for Software Startup Pluralsight Course. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

SQLAuthority News – Memories at Anniversary of SQL Wait Stats Book

- by pinaldave

SQL Wait Stats About a year ago, I had very proud moment. I had published my second book SQL Server Wait Stats with me as a primary author. It has been a long journey since then. The book got great response and it was widely accepted in the community. It was first of its kind of book written specifically on Wait Stats and Performance. The book was based on my earlier month long series written on the same subject SQL Server Wait Stats. Today, on the anniversary of the book, lots of things come to my mind let me share a few here. Idea behind Blog Series A very common question I often receive is why I wrote a 30 day series on Wait Stats. There were two reasons for it. 1) I have been working with SQL Server for a long time and have troubleshoot more than hundreds of SQL Server which are related to performance tuning. It was a great experience and it taught me a lot of new things. I always documented my experience. After a while I found that I was able to completely rely on my own notes when I was troubleshooting any servers. It is right then I decided to document my experience for the community. 2) While working with wait stats there were a few things, which I thought I knew it well as they were working. However, there was always a fear in the back of mind that what happens if what I believed was incorrect and I was on the wrong path all the time. There was only one way to get it validated. Put it out in front community with my understanding and request further help to improve my understanding. It worked, it worked beautifully. I received plenty of conversations, emails and comments. I refined my content based on various conversations and make it more relevant and near accurate. I guess above two are the major reasons for beginning my journey on writing Wait Stats blog series. Idea behind Book After writing a blog series there was a good amount of request I keep on receiving that I should convert it to eBook or proper book as reading blog posts is great but it goes not give a comprehensive understanding of the subject. The very common feedback from users who were beginning the subject that they will prefer to read it in a structured method. After hearing the feedback for more than 4 months, I decided to write a book based on the blog posts. When I envisioned book, I wanted to make sure this book addresses the wait stats concepts from the fundamentals and fill the gaps of blogs I wrote earlier. Rick Morelan and Joes 2 Pros Team I must acknowledge my co-author Rick Morelan for his unconditional support in writing this book. I had already authored one book before I published this book. The experience to write the book was out of the world. Writing blog posts are much much easier than writing books. The efforts it takes to write a book is 100 times more even though the content is ready. I could have not done it myself if there was not tremendous support of my co-author and editor’s team. We spend days and days researching and discussing various concepts covered in the book. When we were in doubt we reached out to experts as well did a practical reproduction of the scenarios to validate the concepts and claims. After continuous 3 months of hard work we were able to get this book out in the community. September 1st – the lucky day Well, we had to select any day to publish the books. When book was completed in August last week we felt very glad. We all had worked hard and having a sample draft book in hand was feeling like having a newborn baby in our hand. Every time my books are published I feel the same joy which I had when my daughter was born. The feeling of holding a new book in hand is the (almost) same feeling as holding newborn baby. I am excited. For me September 1st has been the luckiest day in mind life. My daughter Shaivi was born on September 1st. Since then every September first has been excellent day and have taken me to the next step in life. I believe anything and everything I do on September 1st it is turning out to be successful and blessed. Rick and I had finished a book in the last week of August. We sent it to the publisher (printer) and asked him to take the book live as soon as possible. We did not decide on any date as we wanted the book to get out as fast as it can. Interesting enough, the publisher/printer selected September 1st for publishing the book. He published the book on 1st September and I knew it at the same time that this book will go next level. Book Model – The Most Beautiful Girl We were done with book. We had no budget left for marketing. Rick and I had a long conversation regarding how to spread the words for the book so it can reach to many people. While we were talking about marketing Rick come up with the idea that we should hire a most beautiful girl around who acknowledge our book and genuinely care for book. It was a difficult task and Rick asked me to find a more beautiful girl. I am a father and the most beautiful girl for me my daughter. This was not a difficult task for me. Rick had given me task to find the most beautiful girl and I just could not think of anyone else than my own daughter. I still do not know what Rick thought about this idea but I had already made up my mind. You can see the detailed blog post here. The Fun Experiments Book Signing Event We had lots of fun moments along this book. We have given away more books to people for free than we have sold them actually. We had done book signing events, contests, and just plain give away when we found people can be benefited from this book. There was never an intention to make money and get rich. We just wanted that more and more people know about this new concept and learn from it. Today when I look back to the earnings there is nothing much we have earned if you talk about dollars. However the best reward which we have received is the satisfaction and love of community. The amount of emails, conversations we have so far received for this book is over thousands. We had fun writing this book, it was indeed a very satisfying journey. I have earned lots of friends while learning and exploring. Availability The book is one year old but still very relevant when it is about performance tuning. It is available at various online book stores. If you have read the book, do let me know what you think of it. Amazon | Kindle | Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority, SQLAuthority Book Review, T SQL, Technology

Read the article

How to Manage Your Movies in Boxee

- by DigitalGeekery

Boxee is a free cross platform HTPC application that plays media locally and via the Internet. Today we’ll take a look at how to manage your local movie collection in Boxee. Note: We are using the most recent version of Boxee running on Windows 7. Your experience on an earlier version or a Mac or Linux build may vary slightly. If you are using an earlier version of Boxee, we recommend you update to the current version (0.9.21.11487). The latest update features significant improvements in file and media identification. Naming your Movie Files Proper file naming is important for Boxee to correctly identify your movie files. Before you get started you may want to take some time to name your files properly. Boxee supports the following naming conventions: Lawrence of Arabia.avi Lawrence.of.Arabia.avi Lawrence of Arabia (1962).avi Lawrence.of.Arabia(1962).avi For multi-part movies, you can use .part or .cd to identify first and second parts of the movie. Gettysburg.part1.avi Gettysburg.part2.avi If you are unsure of the correct title of the movie, check with IMDB.com. Supported File Types Boxee supports the following video file types and codecs: AVI, MPEG, WMV, ASF, FLV, MKV, MOV, MP4, M4A, AAC, NUT, Ogg, OGM, RealMedia RAM/RM/RV/RA/RMVB, 3gp, VIVO, PVA, NUV, NSV, NSA, FLI, FLC, and DVR-MS (beta support) CDs, DVDs, VCD/SVCD MPEG-1, MPEG-2, MPEG-4 (SP and ASP, including DivX, XviD, 3ivx, DV, H.263), MPEG-4 AVC (aka H.264), HuffYUV, Indeo, MJPEG, RealVideo, QuickTime, Sorenson, WMV, Cinepak Adding Movie Files to Boxee Boxee will automatically scan your default media folders and add any movie files to My Movies. Boxee will attempt to identify the media and check sources on the web to get data like cover art and other metadata. You can add as many sources to Boxee as you like from your local hard drive, external hard drives or from your network. You will need to make sure you have access to shared folders on the networked computer hosting the media you want to share. You can browse for other folders to scan by selecting Scan Media Folders. You can also add media files by selecting Settings from the Home screen… Then select Media… and then selecting Add Sources. Browse for your directory and select Add source. Next, you’ll need to select the media type and the type of scanning. You can also change the share name if you’d like. When finished, select Add. You should see a quick notification at the top of the screen that the source was added. Select Scan source to have Boxee to begin scanning your media files and attempt to properly identify them. Your movies may not show up instantly in My Movies. It will take Boxee some time to fully scan your sources, especially if you have a large collection. Eventually you should see My Movies begin to populate with cover art and metadata. You can see the progress and find unidentified files by clicking on the yellow arrow to the left, or navigating to the left with your keyboard or remote and selecting Manage Sources. Here you can see how many files (if any) Boxee failed to identify. To see which titles are unresolved, select Unidentified Files. Here you’ll find your unresolved files. Select one of the unidentified files to search for the proper movie information. Next, select the Indentify Video icon. Boxee will fill in the title of the file or you edit the title yourself in the text box. Click Search. The results of your search will be displayed. Scroll through and select the title that fits your movie. Check the details of the film to make sure you have the correct title and select Done. Fixing Incorrectly Indentified Files If you find a movie has been incorrectly identified you can correct it manually. Select the movie. Then search for the correct movie title from the list and select it. When you’re sure you found the correct movie, click Done. Filtering your Movies You can filter your movie collection by genre, or by whether it has been marked as watched or unwatched. When you’ve finished watching a movie, Boxee will mark it as watched. You can also manually mark a title as watched. Boxee also features a wide variety of genres by which you can filter the titles in your library. Playing your Movie When you’re ready to start watching a movie, simply select your title. From here, you can select the “i” icon to read more information about the movie, add it to your queue, or add a shortcut. Click Local File to begin playing. Now you’re ready to enjoy your movie. If you don’t have a large movie collection or just need more selection, you may want to check out the Netflix App for Boxee. Looking for a Boxee remote? Check out the iPhone App for Boxee. Links Download Boxee IMDB.com Similar Articles Productive Geek Tips Watch Netflix Instant Movies in BoxeeIntegrate Boxee with Media Center in Windows 7Customize the Background in BoxeeUse your iPhone or iPod Touch as a Boxee RemoteGetting Started with Boxee TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free

Read the article

Getting Started with ASP.NET Membership, Profile and RoleManager

- by Ben Griswold

A new ASP.NET MVC project includes preconfigured Membership, Profile and RoleManager providers right out of the box. Try it yourself – create a ASP.NET MVC application, crack open the web.config file and have a look. First, you’ll find the ApplicationServices database connection: <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> Notice the connection string is referencing the aspnetdb.mdf database hosted by SQL Express and it’s using integrated security so it’ll just work for you without having to call out a specific database login or anything. Scroll down the file a bit and you’ll find each of the three noted sections: <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/" /> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/" /> </providers> </profile> <roleManager enabled="false"> <providers> <clear /> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </roleManager> Really. It’s all there. Still don’t believe me. Run the application, walk through the registration process and finally login and logout. Completely functional – and you didn’t have to do a thing! What else? Well, you can manage your users via the Configuration Manager which is hiding in Visual Studio behind Projects > ASP.NET Configuration. The ASP.NET Web Site Administration Tool isn’t MVC-specific (neither is the Membership, Profile or RoleManager stuff) but it’s neat and I hardly ever see anyone using it. Here you can set up and edit users, roles, and set access permissions for your site. You can manage application settings, establish your SMTP settings, configure debugging and tracing, define default error page and even take your application offline. The UI is rather plain-Jane but it works great. And here’s the best of all. Let’s say you, like most of us, don’t want to run your application on top of the aspnetdb.mdf database. Let’s suppose you want to use your own database and you’d like to add the membership stuff to it. Well, that’s easy enough. Take a look inside your [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\ folder. Here you’ll find a bunch of files. If you were to run the InstallCommon.sql, InstallMembership.sql, InstallRoles.sql and InstallProfile.sql files against the database of your choices, you’d be installing the same membership, profile and role artifacts which are found in the aspnet.db to your own database. Too much trouble? Okay. Run [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\aspnet_regsql.exe from the command line instead. This will launch the ASP.NET SQL Server Setup Wizard which walks you through the installation of those same database objects into the new or existing database of your choice. You may not always have the luxury of using this tool on your destination server, but you should use it whenever you can. Last tip: don’t forget to update the ApplicationServices connectionstring to point to your custom database after the setup is complete. At the risk of sounding like a smarty, everything I’ve mentioned in this post has been around for quite a while. The thing is that not everyone has had the opportunity to use it. And it makes sense. I know I’ve worked on projects which used custom membership services. Why bother with the out-of-the-box stuff, right? And the .NET framework is so massive, who can know it all. Well, eventually you might have a chance to architect your own solution using any implementation you’d like or you will have the time to play around with another aspect of the framework. When you do, think back to this post.

Read the article

The Incremental Architect´s Napkin - #1 - It´s about the money, stupid

- by Ralf Westphal

Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/05/24/the-incremental-architectacutes-napkin---1---itacutes-about-the.aspx Software development is an economic endeavor. A customer is only willing to pay for value. What makes a software valuable is required to become a trait of the software. We as software developers thus need to understand and then find a way to implement requirements. Whether or in how far a customer really can know beforehand what´s going to be valuable for him/her in the end is a topic of constant debate. Some aspects of the requirements might be less foggy than others. Sometimes the customer does not know what he/she wants. Sometimes he/she´s certain to want something - but then is not happy when that´s delivered. Nevertheless requirements exist. And developers will only be paid if they deliver value. So we better focus on doing that. Although is might sound trivial I think it´s important to state the corollary: We need to be able to trace anything we do as developers back to some requirement. You decide to use Go as the implementation language? Well, what´s the customer´s requirement this decision is linked to? You decide to use WPF as the GUI technology? What´s the customer´s requirement? You decide in favor of a layered architecture? What´s the customer´s requirement? You decide to put code in three classes instead of just one? What´s the customer´s requirement behind that? You decide to use MongoDB over MySql? What´s the customer´s requirement behind that? etc. I´m not saying any of these decisions are wrong. I´m just saying whatever you decide be clear about the requirement that´s driving your decision. You have to be able to answer the question: Why do you think will X deliver more value to the customer than the alternatives? Customers are not interested in romantic ideals of hard working, good willing, quality focused craftsmen. They don´t care how and why you work - as long as what you deliver fulfills their needs. They want to trust you to recognize this as your top priority - and then deliver. That´s all. Fundamental aspects of requirements If you´re like me you´re probably not used to such scrutinization. You want to be trusted as a professional developer - and decide quite a few things following your gut feeling. Or by relying on “established practices”. That´s ok in general and most of the time - but still… I think we should be more conscious about our decisions. Which would make us more responsible, even more professional. But without further guidance it´s hard to reason about many of the myriad decisions we´ve to make over the course of a software project. What I found helpful in this situation is structuring requirements into fundamental aspects. Instead of one large heap of requirements then there are smaller blobs. With them it´s easier to check if a decisions falls in their scope. Sure, every project has it´s very own requirements. But all of them belong to just three different major categories, I think. Any requirement either pertains to functionality, non-functional aspects or sustainability. For short I call those aspects: Functionality, because such requirements describe which transformations a software should offer. For example: A calculator software should be able to add and multiply real numbers. An auction website should enable you to set up an auction anytime or to find auctions to bid for. Quality, because such requirements describe how functionality is supposed to work, e.g. fast or secure. For example: A calculator should be able to calculate the sinus of a value much faster than you could in your head. An auction website should accept bids from millions of users. Security of Investment, because functionality and quality need not just be delivered in any way. It´s important to the customer to get them quickly - and not only today but over the course of several years. This aspect introduces time into the “requrements equation”. Security of Investments (SoI) sure is a non-functional requirement. But I think it´s important to not subsume it under the Quality (Q) aspect. That´s because SoI has quite special properties. For one, SoI for software means something completely different from what it means for hardware. If you buy hardware (a car, a hair blower) you find that a worthwhile investment, if the hardware does not change it´s functionality or quality over time. A car still running smoothly with hardly any rust spots after 10 years of daily usage would be a very secure investment. So for hardware (or material products, if you like) “unchangeability” (in the face of usage) is desirable. With software you want the contrary. Software that cannot be changed is a waste. SoI for software means “changeability”. You want to be sure that the software you buy/order today can be changed, adapted, improved over an unforseeable number of years so as fit changes in its usage environment. But that´s not the only reason why the SoI aspect is special. On top of changeability[1] (or evolvability) comes immeasurability. Evolvability cannot readily be measured by counting something. Whether the changeability is as high as the customer wants it, cannot be determined by looking at metrics like Lines of Code or Cyclomatic Complexity or Afferent Coupling. They may give a hint… but they are far, far from precise. That´s because of the nature of changeability. It´s different from performance or scalability. Also it´s because a customer cannot tell upfront, “how much” evolvability he/she wants. Whether requirements regarding Functionality (F) and Q have been met, a customer can tell you very quickly and very precisely. A calculation is missing, the calculation takes too long, the calculation time degrades with increased load, the calculation is accessible to the wrong users etc. That´s all very or at least comparatively easy to determine. But changeability… That´s a whole different thing. Nevertheless over time the customer will develop a feedling if changeability is good enough or degrading. He/she just has to check the development of the frequency of “WTF”s from developers ;-) F and Q are “timeless” requirement categories. Customers want us to deliver on them now. Just focusing on the now, though, is rarely beneficial in the long run. So SoI adds a counterweight to the requirements picture. Customers want SoI - whether they know it or not, whether they state if explicitly or not. In closing A customer´s requirements are not monolithic. They are not all made the same. Rather they fall into different categories. We as developers need to recognize these categories when confronted with some requirement - and take them into account. Only then can we make true professional decisions, i.e. conscious and responsible ones. I call this fundamental trait of software “changeability” and not “flexibility” to distinguish to whom it´s a concern. “Flexibility” to me means, software as is can easily be adapted to a change in its environment, e.g. by tweaking some config data or adding a library which gets picked up by a plug-in engine. “Flexibiltiy” thus is a matter of some user. “Changeability”, on the other hand, to me means, software can easily be changed in its structure to adapt it to new requirements. That´s a matter of the software developer. ?

Read the article

At the Java DEMOgrounds - JavaFX

- by Janice J. Heiss

JavaFX has made rapid progress in the last year, as is evidenced by the wealth of demos on display. A few questions appear to be prominent in the minds of JavaFX enthusiasts. Here are some questions with answers provided by Oracle’s JavaFX team.When will the rest of the JavaFX code be available in open source?Oracle has started to open source JavaFX. The existing platform code will finish being committed to OpenJFX by the end of the year.Why should I use JavaFX instead of HTML5?We see JavaFX as complementary to HTML5, and most companies we talk to react positively once they understand how they can benefit from a hybrid solution. As most HTML5 developers will tell you, the biggest obstacle to deploying HTML5 applications is fragmentation. JavaFX offers a convenient way to render HTML and JavaScript within its WebView component, which provides the same level of quality and features across Windows, Mac, and Linux. Additionally, JavaScript in WebView can make calls into the Java code, and vice versa, allowing developers to tap into the best of both worlds.What is the market penetration of JavaFX? It is currently limited, as we've just made available JavaFX on Mac and Linux in August, but we expect JavaFX to be present on millions of desktop-type systems now that JavaFX is included as part of the JRE. We have also significantly lowered the level of effort required to deploy an application bundling the JRE and JavaFX runtime libraries. Finally, we are seeing a lot of interest by companies operating in the embedded market, who have found it hard to develop compelling UIs with existing technologies.Below are summaries of JavaFX Demos on display at JavaOne 2012:JavaFX EnsembleEnsemble is a collection of over 100 JavaFX samples packaged as a JavaFX application. This demo is especially useful to those new to JavaFX, or those not familiar with its latest features (e.g. canvas, color picker). Ensemble is the reference for getting familiar with JavaFX functionality. Each sample can be run from within Ensemble, and the API for each sample, as well as the source code are available alongside the sample.The samples source code can be saved as a NetBeans project for convenience purposes, or can be copied as is in any other Java IDE. The version of Ensemble shown is packaged as a native Windows application, including the JRE and JavaFX libraries. It was created with the JavaFX packager, which provides multiple packaging options, and frees developers from the cumbersome and error-prone process of packaging a Java application.FX Experience ToolsFX Experience Tools is a JavaFX application that provides different utilities to create new skins for your JavaFX applications. One of the most powerful features of JavaFX is the ability to skin applications via CSS. Since not all Java developers are familiar with CSS, these utilities are a great starting point to create custom skins. JavaFX allows developers to easily customize the look and feel of their applications through CSS. FX Experience Tools makes it easy to create new themes for JavaFX applications, even if you are not familiar with CSS. FX Experience Tools is a JavaFX application packaged as a native application including the JRE and JavaFX runtime libraries. FX Experience tools shows how this type of deployment simplifies the packaging of Java applications without requiring developers to master the intricacies of Java application packaging. The download site for FX Experience Tools is http://fxexperience.com/2012/03/announcing-fx-experience-tools/ JavaFX Scene BuilderJavaFX Scene Builder is a visual layout tool that lets users quickly design the UI of your JavaFX application, without coding. Users can drag and drop UI components, modify their properties, apply style sheets, and the FXML code they create for the layout is automatically generated in the background. The result is an FXML file that can then be combined with a Java project by binding the UI to the application’s logic. Developers can easily create user interfaces for their application, as well as separate the application’s UI from the application logic for easier maintenance. Attendees can get this app by going to javafx.com and checking the link at top of the “Overview” page.Scene Builder allows developers to easily layout JavaFX UI controls, charts, shapes, and containers, so that you can quickly prototype user interfaces. It generates FXML, an XML-based markup language that enables users to define an application’s user interface, separately from the application logic. Scene Builder can be used in combination with any Java IDE, but is more tightly integrated with NetBeans IDE. It is written as a JavaFX application, with native desktop integration on Windows and Mac OS X. It’s a perfect example of a JavaFX application packages as a native application.Scene Builder is available for your preferred development platform. Besides the GA release on Windows and Mac, a Developer Preview of Scene Builder for Linux has just been made available.Scenic ViewScenic View is a tool that can be used to understand the current state of your application UI, and to also easily manipulate properties of the scenegraph without having to keep editing your code. Creating UIs is a complex process, and it can be hard and tedious detecting these issues, editing the code, and then compiling it to test the app again. Scenic View is a great diagnostics tool that helps developers identify these issues and correct them at runtime.Attendees can get Scenic View by going to javafx.com, selecting the “Community” tab, and clicking the link under the “Third Party Tools and Utilities” section.Scenic View allows developers to easily examine the state of a JavaFX application scenegraph while the application is running. Some of the latest features added to Scenic View include event monitoring, javadoc browsing, and contextual menus. The download site for Scenic View is available here: http://fxexperience.com/scenic-view/ Conference TourConference Tour is an application that lets users discover some of the major Java conferences throughout the world. The Conference Tour application shows how simple it is to mix JavaFX and HTML5 into a single, interactive application. Attendees get Conference Tour here.JavaFX includes a Web engine based on Webkit that provides a consistent web interface to render HTML5 across operating systems, within a JavaFX application. JavaFX features a bi-directional bridge that allows Java APIs to call JavaScript within WebView, or allows JavaScript to make calls to Java APIs. This allows developers to leverage the best of both worlds.Java EE developers can take advantage of WebView and the JavaScript-Java bridge to allow their HTML clients to seamlessly bypass Web browser’s sandbox to access native system resources, providing a richer user experience.FXMediaPlayerFXMediaPlayer is an application that lets developers check different media functionality in JavaFX, such as synthesizer or support for HTTP Live Streaming (HLS). This demo shows how developers can embed video content in their Java applications. JavaFX leverages the underlying video (e.g., H.264) and audio (e.g., AAC) codecs on the user’s computer. JavaFX APIs allow developers to interact with the video content (e.g. play/pause, or programmable markers). Some of the latest media features introduced in JavaFX 2.2 include HTTP Live Streaming (HLS). Obviously there is a lot for JavaFX enthusiasts to chew on!

Read the article

Building Great-Looking, Usable Apps: A two-day workshop applying Oracle’s best UX practices in ADF

- by mvaughan

By Misha Vaughan, Oracle Applications User ExperienceI have been with Oracle for more than 12 years. It is a company that has granted me extraordinary creative freedom to help deliver compelling experiences for customers.I am beyond proud to talk about one of the experiences we just took for a test drive. Recently, we delivered a first-of-its-kind, three-team collaboration, train-the-trainer event in Reading, U.K., on building great-looking, usable apps based on Oracle Fusion Applications -- using the ADF tool kit. A new kind of workshopKevin Li, Platform Product Director, asked the Oracle Applications User Experience VP, Jeremy Ashley, if the team had anything to help partners and customers build applications that looked like Fusion. He was receiving this request from European partners and customers.Some quick conversations ensued, and the idea for the workshop was born: We would conduct an experiment. We would work with feedback from the key Platform Technology Solutions (PTS) trainers under Andre Pavanello, Director, Platform Technology Solutions, in Europe, Middle East, and Africa. We would partner with the ADF team lead by Grant Ronald, Director of Product Management, title> and leverage the Applications UX expertise in Ashley’s team.The goal: Create a pilot workshop that in two days would explain to an ADF developer how to leverage the next-generation user experience best-practices developed for Fusion Apps. Why? Customers who need integrations with Oracle Fusion Applications, who are looking for custom applications that need to co-exist with Fusion, or who quite simply want a next-generation design for a custom app, need their solutions to reflect the next-generation research and design.Building an event for an ADF developerThe biggest hurdle was figuring out where to start. How far into user experience country do you take an ADF developer? How far into ADF do you need to go if you are a UX professional?After some time in the UX kitchen, the workshop recipe looked like this: Mix equal parts: Fusion user experience design principles and functional design patterns The art and science behind UX How to wireframe designs that you can build in Fusion How to translate those designs into an ADF application Ultan O’Broin, Director of Global User Experience, explaining the trouble ticket wireframe design exerciseLynn Munsinger, Senior Group Product Manager, explaining the follow-on trouble ticket ADF coding exercise For spice, add:• Debra Lilley, Fujitsu and ACE director, showcasing some of the latest ADF design work in the new face of Fusion Applications • Partner show-and-tell of example apps they have built with FMW and ADF that are dynamic, beautiful, and interactive.Debra Lilley, Oracle ACE Director and Fujitsu Fusion Champion on the new face of Fusion built with ADF and Fusion extensibility with composers as a window into “the possible”?The taste testThis first go-round of the workshop was aimed squarely at ADF developers and partners. We were privileged to have participation and feedback from:• Sten Vesterli, Scott/Tiger S. A., Denmark• John Sim, Fishbowl Solutions, UK• Josef Huber, Primus Delphi Group, Munich• Thaddaus Weindl, Primus Delphi, Group , Munich• Praveen Pillalamarri, EiS Technologies, Bangalore• Balaji Kamepalli, EiS Technologies, Bangalore• Plinio Arbizu, Services & Processes Solutions S. A., Mexico• Yannick Ongena, infoMENTUM, UK• Jakub Ciszek, infoMENTUM, UK• Mauro Flores, infoMENTUM, UK• Matteo Formica, infoMENTUM, UKRichard Bingham, Oracle, Mauro Flores and Matteo Formica, infoMENTUMWhy is this so exciting? Oracle has invested heavily in the research and development of the Oracle Fusion Applications user experience. This investment has been and continues to be applied across the product lines. Now, we finally get to teach customers and partners how to take advantage of this investment for custom solutions.This event was a pilot to test-drive the content, as well as a train-the-trainer event that our EMEA colleagues will be using with partners who want to build with Fusion Apps design patterns.What did attendees think?"I liked most the science stuff, like eye-tracking, design patterns and best-practice (color, contrast),” Josef Huber said. “It was a very good introduction to UI design, and most developers and project managers are very bad in that. So this course would be good for all developers and even project managers." Team Anonymous: John Sim, Fishbowl Solutions, Flavius Sana, Oracle, Josef Huber, infoMENTUM, Mireille Duroussaud, Oracle. Winners of the wireframing design exercise. Sten Vesterli, of Scott/Tiger, said he attended to learn techniques he could use in his own projects. He wants to ensure that his applications better meet the needs of his users, and he said sessions during the workshop on user interface design and wireframing were most useful to him. “Go to this event to learn the art and science of good user interfaces from people who really know how to do it,” he said.Sten Vesterli, Scott/Tiger, Angelo Santagata, Oracle Plinio Arbizu said the workshop fulfilled his goals, thanks to the recommendations given in how to design user interfaces to facilitate the adoption of applications among the final users. “The workshop combined these recommendations with an exercise that improved the technical comprehension, permitting the usage of JDeveloper to set forth our solutions,” he said. He added: “The first session that I really enjoyed was the five Fusion design principles. It was incredible to discover how these simple principles were included in an inherit manner in Fusion Applications, and I had been using many of them applying only ADF components. Another topic that I enjoyed a lot was the eight recommendations about the visual design of UIs. The issues that were raised in that lesson are unknown to the developers and of great value to achieve an attractive presentation layer to the end users. Participate in this workshop, and include these usability features in your projects and in this manner not only to facilitate and improve the user productivity, but also to distinguish you as a professional who takes advantage fully of the functionalities offered by Oracle technology. Praveen Pillalamarri came to the workshop to learn about the difficulties faced in UI and UX development, and how this can be resolved with the help of ADF. He also appreciated the opportunity to talk with other individuals who came to the workshop. Pillalmarri said, “The way we looked at things in terms of work and projects were sharpened. UI and UX design knowledge shared by you was quite interesting, especially the minute things which we ignored in the UI or UX design.” Plinio Arbizu, Services & Processes Solutions S. A., Richard Bingham, Oracle, Balaji Kamepalli, & Praveen Pillalamarri, EiS TechnologiesReady to spread the wordIn EMEA, Oracle customers and partners have access to three world-class trainers via Platform Technology Solutions: Mireille Duroussaud, Flavius Sana, and Angelo Santagata. Contact Andre Pavanello if you like to experience this workshop firsthand, or you have customers or partners who would benefit from the training.We are looking to bring the event to the U.S. in spring 2013. If you have interest in this kind of a workshop, leave a comment below. For those who want to follow the action, join the ADF Enterprise Methodology Group run by Oracle’s Chris Muir. Ask questions and continue with the conversation in this forum, or check blogs.oracle.com/usableapps for topics emerging from the workshop.

Read the article

PeopleSoft Upgrades, Fusion, & BI for Leading European PeopleSoft Applications Customers

- by Mark Rosenberg

With so many industry-leading services firms around the globe managing their businesses with PeopleSoft, it’s always an adventure setting up times and meetings for us to keep in touch with them, especially those outside of North America who often do not get to join us at Oracle OpenWorld. Fortunately, during the first two weeks of May, Nigel Woodland (Oracle’s Service Industries Director for the EMEA region) and I successfully blocked off our calendars to visit seven different customers spanning four countries in Western Europe. We met executives and leaders at four Staffing industry firms, two Professional Services firms that engage in consulting and auditing, and a Financial Services firm. As we shared the latest information regarding product capabilities and plans, we also gained valuable insight into the hot technology topics facing these businesses. What we heard was both informative and inspiring, and I suspect other Oracle PeopleSoft applications customers can benefit from one or more of the following observations from our trip. Great IT Plans Get Executed When You Respect the Users Each of our visits followed roughly the same pattern. After introductions, Nigel outlined Oracle’s product and technology strategy, including a discussion of how we at Oracle invest in each layer of the “technology stack” to provide customers with unprecedented business management capabilities and choice. Then, I provided the specifics of the PeopleSoft product line’s investment strategy, detailing the dramatic number of rich usability and functionality enhancements added to release 9.1 since its general availability in 2009 and the game-changing capabilities slated for 9.2. What was most exciting about each of these discussions was that shortly after my talking about what customers can do with release 9.1 right now to drive up user productivity and satisfaction, I saw the wheels turning in the minds of our audiences. Business analyst and end user-configurable tools and technologies, such as WorkCenters and the Related Action Framework, that provide the ability to tailor a “central command center” to the exact needs of each recruiter, biller, and every other role in the organization were exactly what each of our customers had been looking for. Every one of our audiences agreed that these tools which demonstrate a respect for the user would finally help IT pole vault over the wall of resistance that users had often raised in the past. With these new user-focused capabilities, IT is positioned to definitively partner with the business, instead of drag the business along, to unlock the value of their investment in PeopleSoft. This topic of respecting the user emerged during our very first visit, which was at Vital Services Group at their Head Office “The Mill” in Manchester, England. (If you are a student of architecture and are ever in Manchester, you should stop in to see this amazingly renovated old mill building.) I had just finished explaining our PeopleSoft 9.2 roadmap, and Mike Code, PeopleSoft Systems Manager for this innovative staffing company, said, “Mark, the new features you’ve shown us in 9.1/9.2 are very relevant to our business. As we forge ahead with the 9.1 upgrade, the ability to configure a targeted user interface with WorkCenters, Related Actions, Pivot Grids, and Alerts will enable us to satisfy the business that this upgrade is for them and will deliver tangible benefits. In fact, you’ve highlighted that we need to start talking to the business to keep up the momentum to start reviewing the 9.2 upgrade after we get to 9.1, because as much as 9.1 and PeopleTools 8.52 offers, what you’ve shown us for 9.2 is what we’ve envisioned was ultimately possible with our investment in PeopleSoft applications.” We also received valuable feedback about our investment for the Staffing industry when we visited with Hans Wanders, CIO of Randstad (the second largest Staffing company in the world) in the Netherlands. After our visit, Hans noted, “It was very interesting to see how the PeopleSoft applications have developed. I was truly impressed by many of the new developments.” Hans and Mike, sincere thanks for the validation that our team’s hard work and dedication to “respecting the users” is worth the effort! Co-existence of PeopleSoft and Fusion Applications Just Makes Sense As a “product person,” one of the most rewarding things about visiting customers is that they actually want to talk to me. Sometimes, they want to discuss a product area that we need to enhance; other times, they are interested in learning how to extract more value from their applications; and still others, they want to tell me how they are using the applications to drive real value for the business. During this trip, I was very pleased to hear that several of our customers not only thought the co-existence of Fusion applications alongside PeopleSoft applications made sense in theory, but also that they were aggressively looking at how to deploy one or more Fusion applications alongside their PeopleSoft HCM and FSCM applications. The most common deployment plan in the works by three of the organizations is to upgrade to PeopleSoft 9.1 or 9.2, and then adopt one of the new Fusion HCM applications, such as Fusion Performance Management or the full suite of Fusion Talent Management. For example, during an applications upgrade planning discussion with the staffing company Hays plc., Mark Thomas, who is Hays’ UK IT Director, commented, “We are very excited about where we can go with the latest versions of the PeopleSoft applications in conjunction with Fusion Talent Management.” Needless to say, this news was very encouraging, because it reiterated that our applications investment strategy makes good business sense for our customers. Next Generation Business Intelligence Is the Key to the Future The third, and perhaps most exciting, lesson I learned during this journey is that our audiences already know that the latest generation of Business Intelligence technologies will be the “secret sauce” for organizations to transform business in radical ways. While a number of the organizations we visited on the trip have deployed or are deploying Oracle Business Intelligence Enterprise Edition and the associated analytics applications to provide dashboards of easy-to-understand, user-configurable metrics that help optimize business performance according to current operating procedures, what’s most exciting to them is being able to use Business Intelligence to change the way an organization does business, grows revenue, and makes a profit. In particular, several executives we met asked whether we can help them minimize the need to have perfectly structured data and at the same time generate analytics that improve order fulfillment decision-making. To them, the path to future growth lies in having the ability to analyze unstructured data rapidly and intuitively and leveraging technology’s ability to detect patterns that a human cannot reasonably be expected to see. For illustrative purposes, here is a good example of a business problem where analyzing a combination of structured and unstructured data can produce better results. If you have a resource manager trying to decide which person would be the best fit for an assignment in terms of ensuring (a) client satisfaction, (b) the individual’s satisfaction with the work, (c) least travel distance, and (d) highest margin, you traditionally compare resource qualifications to assignment needs, calculate margins on past work with the client, and measure distances. To perform these comparisons, you are likely to need the organization to have profiles setup, people ranked against profiles, margin targets setup, margins measured, distances setup, distances measured, and more. As you can imagine, this requires organizations to plan and implement data setup, capture, and quality management initiatives to ensure that dependable information is available to support resourcing analysis and decisions. In the fast-paced, tight-budget world in which most organizations operate today, the effort and discipline required to maintain high-quality, structured data like those described in the above example are certainly not desirable and in some cases are not feasible. You can imagine how intrigued our audiences were when I informed them that we are ready to help them analyze volumes of unstructured data, detect trends, and produce recommendations. Our discussions delved into examples of how the firms could leverage Oracle’s Secure Enterprise Search and Endeca technologies to keyword search against, compare, and learn from unstructured resource and assignment data. We also considered examples of how they could employ Oracle Real-Time Decisions to generate statistically significant recommendations based on similar resourcing scenarios that have produced the desired satisfaction and profit margin results. --- Although I had almost no time for sight-seeing during this trip to Europe, I have to say that it may have been one of the most energizing and engaging trips of my career. Showing these dedicated customers how they can give every user a uniquely tailored set of tools and address business problems in ways that have to date been impossible made the journey across the Atlantic more than worth it. If any of these three topics intrigue you, I’d recommend you contact your Oracle applications representative to arrange for more detailed discussions with the appropriate members of our organization.

Read the article

bluetooth not working on Ubuntu 13.10

- by iacopo

I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

Read the article

Computer crashes on resume from standby almost every time

- by Los Frijoles

I am running Ubuntu 12.04 on a Core i5 2500K and ASRock Z68 Pro3-M motherboard (no graphics card, hd is a WD Green 1TB, and cd drive is some cheap lite-on drive). Since installing 12.04, my computer has been freezing after resume, but not every time. When I start to resume, it starts going normally with a blinking cursor on the screen and then sometimes it will continue on to the gnome 3 unlock screen. Most of the time, however, it will blink for a little bit and then the monitor will flip modes and shut off due to no signal. Pressing keys on the keyboard gets no response (num lock light doesn't respond, Ctrl-Alt-F1 fails to drop it into a terminal, Ctrl-Alt-Backspace doesn't work) and so I assume the computer is crashed. The worst part is, the logs look entirely normal. Here is my system log during one of these crashes and my subsequent hard poweroff and restart: Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-1, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[12419]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 22:09:01 kcuzner-desktop CRON[9061]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:17:01 kcuzner-desktop CRON[22142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 22:39:01 kcuzner-desktop CRON[26909]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560822] show_signal_msg: 36 callbacks suppressed Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560828] chromium-browse[9139]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:05:43 kcuzner-desktop kernel: [58586.415158] chromium-browse[21025]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:09:01 kcuzner-desktop CRON[13542]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 23:12:43 kcuzner-desktop kernel: [59006.317590] usb 2-1.7: USB disconnect, device number 8 Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319672] sd 7:0:0:0: [sdg] Synchronizing SCSI cache Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319737] sd 7:0:0:0: [sdg] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 6 23:17:01 kcuzner-desktop CRON[26580]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 23:19:04 kcuzner-desktop acpid: client connected from 29925[0:0] Jun 6 23:19:04 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30131 of process 30131 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 1 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30162 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 2 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30163 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 3 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30166 of process 30166 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 4 threads of 2 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop pulseaudio[30166]: [pulseaudio] pid.c: Daemon already running. Jun 6 23:19:10 kcuzner-desktop acpid: client 2942[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client 29925[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client connected from 1286[0:0] Jun 6 23:19:10 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:28:12 kcuzner-desktop kernel: imklog 5.8.6, log source = /proc/kmsg started. Jun 6 23:28:12 kcuzner-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1053" x-info="http://www.rsyslog.com"] start Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's groupid changed to 103 Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's userid changed to 101 Jun 6 23:28:12 kcuzner-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Ericsson MBM Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Sierra Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Generic Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Huawei Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Linktop Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Failed to init gatt_example plugin Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Listening for HCI events on hci0 Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> NetworkManager (version 0.9.4.0) is starting... Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> DNS: loaded plugin dnsmasq Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Sorry it's so huge; the restart happens at 23:28:12 I believe and all I see is that chromium segfaulted a few times. I wouldn't think a segfault from an individual program on the computer would crash it, but could that be the issue?

Read the article

Creating and maintaining Orchard translations

- by Bertrand Le Roy

Many volunteers have already stepped up to provide translations for Orchard. There are many challenges to overcome with translating such a project. Orchard is a very modular CMS, so the translation mechanism needs to account for the core as well as first and third party modules and themes. Another issue is that every new version of Orchard or of a module changes some localizable strings and adds new ones as others enter obsolescence. In order to address those problems, I've built a small Orchard module that automates some of the most complex tasks that maintaining a translation implies. In this post, I'll walk you through the operations I had to do to update the French translation for Orchard 1.0. In order to make sure you translate all the first party modules, I would recommend that you start from a full source code enlistment. The reason is that I'll show how you can extract the default en-US translation from any source code enlistment. That enables you to create a translation that is even more up-to-date than what is currently on the site. Alternatively, you could start by downloading the current en-US translation. If you decide to do so, just skip the relevant paragraphs. First, let's install the Orchard Translation Manager. I'm starting from a vanilla clone of the latest in the code repository. After you've setup the site, go into the dashboard and click on Gallery. Locate the Orchard Translation Manager in the list of modules and click "Install". Once the module is installed, you need to enable its one feature by going into Configuration/Features and clicking "Enable" next to Vandelay.TranslationManager. We're done with the setup that we need in order to start our translation work. We'll now switch to the command-line and to our favorite text editor. Open a command-line on the Orchard web site folder. I found the easiest way to do this is to do a SHIFT+right-click on the Orchard.Web folder in Windows Explorer and to click "Open command window here". Type bin\orchard to enter the Orchard command-line environment. If you do a "help commands" you should see four commands in the list that came from the module we just installed: extract default translation, install translation, package translation and sync translation. First, we're going to generate the default translation. Note that it is possible to generate that default translation for a specific list of modules and themes by using the /Extensions: switch, which should facilitate the translation of third party extensions, but in this tutorial we're going to generate it for the whole of the Orchard source code. extract default translation /Output:\temp .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This should have created an Orchard.en-us.po.zip file in the temp directory. Extract that archive into an orchard.po folder under \temp. The next step depends on whether you have an existing translation that you want to update or not. If you do have an existing translation, just extract it into the same \temp\orchard.po directory. That should result in a file structure where you have the default en-US translation alongside your own. If you don't have an existing translation, just continue, the commands will be the same. We are now going to synchronize those translations (or generate the stub for a new one if you didn't start from an existing translation). sync translation /Input:\temp\orchard.po /Culture:fr-FR After this command (where you should of course substitute fr-FR with the culture you're working on), we now have updated files that contain a few useful flags. Open each of the .po files under the culture you are working on (there should be around 36) with your favorite text editor. For all the strings that are still valid in the latest version, nothing changes and you don't need to do anything. For all the strings that disappeared from the default culture, the old translation will still be there but they will be prefixed with the following comment: # Obsolete translation Conveniently, all the obsolete strings will be grouped at the end of the file. You can select all those and delete them. For all the new strings, you will see the following comment: # Untranslated string This is where the hard work begins. You'll need to translate each of those new strings by entering the translation between the quotes in: msgstr "" Don't introduce hard carriage returns in the strings, just stay on one line (your text editor should do some reasonable wrapping so this shouldn't be a big deal). Once you're done with a file, save it. Make sure, and this is very important, that your text editor is saving using the UTF-8 encoding. In Notepad, that setting can be found in the file saving dialog by doing a "Save As" rather than a plain "Save": When all the po files have been edited, you are ready to package the translation for submission (a.k.a. sending e-mail to the localization mailing list). package translation /Culture:fr-FR /Input:\temp\orchard.po /Output:\temp You should now see a Orchard.fr-FR.po.zip file in temp that is ready to be submitted. That is, once you've tested it, which can be done by deploying it into the site: install translation \temp\orchard.fr-fr.po.zip Once this is done you can go into the dashboard under Configuration/Settings and click on "Add or remove supported cultures for the site". Choose your culture and click "Add". You can go back to settings and set the default culture. Save. You may now take a tour of the application and verify that everything works as expected: And that's it really. Creating a translation for Orchard is a matter of a few hours. If you don't see a translation for your culture, please consider creating it.

Read the article

SQL SERVER – Weekly Series – Memory Lane – #051

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Explanation and Understanding NOT NULL Constraint NOT NULL is integrity CONSTRAINT. It does not allow creating of the row where column contains NULL value. Most discussed questions about NULL is what is NULL? I will not go in depth analysis it. Simply put NULL is unknown or missing data. When NULL is present in database columns, it can affect the integrity of the database. I really do not prefer NULL in the database unless they are absolutely necessary. Three T-SQL Script to Create Primary Keys on Table I have always enjoyed writing about three topics Constraint and Keys, Backup and Restore and Datetime Functions. Primary Keys constraints prevent duplicate values for columns and provides a unique identifier to each column, as well it creates clustered index on the columns. 2008 Get Numeric Value From Alpha Numeric String – UDF for Get Numeric Numbers Only SQL is great with String operations. Many times, I use T-SQL to do my string operation. Let us see User Defined Function, which I wrote a few days ago, which will return only Numeric values from Alpha Numeric values. Introduction and Example of UNION and UNION ALL It is very much interesting when I get requests from blog reader to re-write my previous articles. I have received few requests to rewrite my article SQL SERVER – Union vs. Union All – Which is better for performance? with examples. I request you to read my previous article first to understand what is the concept and read this article to understand the same concept with an example. Downgrade Database for Previous Version The main questions is how they can downgrade the from SQL Server 2005 to SQL Server 2000? The answer is : Not Possible. Get Common Records From Two Tables Without Using Join Following is my scenario, Suppose Table 1 and Table 2 has same column e.g. Column1 Following is the query, 1. Select column1,column2 From Table1 2. Select column1 From Table2 I want to find common records from these tables, but I don’t want to use the Join clause because for that I need to specify the column name for Join condition. Will you help me to get common records without using Join condition? I am using SQL Server 2005. Retrieve – Select Only Date Part From DateTime – Best Practice – Part 2 A year ago I wrote a post about SQL SERVER – Retrieve – Select Only Date Part From DateTime – Best Practice where I have discussed two different methods of getting the date part from datetime. Introduction to CLR – Simple Example of CLR Stored Procedure CLR is an abbreviation of Common Language Runtime. In SQL Server 2005 and later version of it database objects can be created which are created in CLR. Stored Procedures, Functions, Triggers can be coded in CLR. CLR is faster than T-SQL in many cases. CLR is mainly used to accomplish tasks which are not possible by T-SQL or can use lots of resources. The CLR can be usually implemented where there is an intense string operation, thread management or iteration methods which can be complicated for T-SQL. Implementing CLR provides more security to the Extended Stored Procedure. 2009 Comic Slow Query – SQL Joke Before Presentation After Presentation Enable Automatic Statistic Update on Database In one of the recent projects, I found out that despite putting good indexes and optimizing the query, I could not achieve an optimized performance and I still received an unoptimized response from the SQL Server. On examination, I figured out that the culprit was statistics. The database that I was trying to optimize had auto update of the statistics was disabled. Recently Executed T-SQL Query Please refer to blog post query to recently executed T-SQL query on database. Change Collation of Database Column – T-SQL Script – Consolidating Collations – Extention Script At some time in your DBA career, you may find yourself in a position when you sit back and realize that your database collations have somehow run amuck, or are faced with the ever annoying CANNOT RESOLVE COLLATION message when trying to join data of varying collation settings. 2010 Visiting Alma Mater – Delivering Session on Database Performance and Career – Nirma Institute of Technology Everyone always dreams of visiting their school and college, where they have studied once. It is a great feeling to see the college once again – where you have spent the wonderful golden years of your time. College time is filled with studies, education, emotions and several plans to build a future. I consider myself fortunate as I got the opportunity to study at some of the best places in the world. Change Column DataTypes There are times when I feel like writing that I am a day older in SQL Server. In fact, there are many who are looking for a solution that is simple enough. Have you ever searched online for something very simple. I often do and enjoy doing things which are straight forward and easy to change. 2011 Three DMVs – sys.dm_server_memory_dumps – sys.dm_server_services – sys.dm_server_registry In this blog post we will see three new DMVs which are introduced in Denali. The DMVs are very simple and there is not much to describe them. So here is the simple game. I will be asking a question back to you after seeing the result of the each of the DMV and you help me to complete this blog post. A Simple Quiz – T-SQL Brain Trick If you have some time, I strongly suggest you try this quiz out as it is for sure twists your brain. 2012 List All The Column With Specific Data Types in Database 5 years ago I wrote script SQL SERVER – 2005 – List All The Column With Specific Data Types, when I read it again, it is very much relevant and I liked it. This is one of the script which every developer would like to keep it handy. I have upgraded the script bit more. I have included few additional information which I believe I should have added from the beginning. It is difficult to visualize the final script when we are writing it first time. Find First Non-Numeric Character from String The function PATINDEX exists for quite a long time in SQL Server but I hardly see it being used. Well, at least I use it and I am comfortable using it. Here is a simple script which I use when I have to identify first non-numeric character. Finding Different ColumnName From Almost Identitical Tables Well here is the interesting example of how we can use sys.column catalogue views and get the details of the newly added column. I have previously written about EXCEPT over here which is very similar to MINUS of Oracle. Storing Data and Files in Cloud – Dropbox – Personal Technology Tip I thought long and hard about doing a Personal Technology Tips series for this blog. I have so many tips I’d like to share. I am on my computer almost all day, every day, so I have a treasure trove of interesting tidbits I like to share if given the chance. The only thing holding me back – which tip to share first? The first tip obviously has the weight of seeming like the most important. But this would mean choosing amongst my favorite tricks and shortcuts. This is a hard task. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

June 2013 Release of the Ajax Control Toolkit

- by Stephen.Walther

I’m happy to announce the June 2013 release of the Ajax Control Toolkit. For this release, we enhanced the AjaxFileUpload control to support uploading files directly to Windows Azure. We also improved the SlideShow control by adding support for CSS3 animations. You can get the latest release of the Ajax Control Toolkit by visiting the project page at CodePlex (http://AjaxControlToolkit.CodePlex.com). Alternatively, you can execute the following NuGet command from the Visual Studio Library Package Manager window: Uploading Files to Azure The AjaxFileUpload control enables you to efficiently upload large files and display progress while uploading. With this release, we’ve added support for uploading large files directly to Windows Azure Blob Storage (You can continue to upload to your server hard drive if you prefer). Imagine, for example, that you have created an Azure Blob Storage container named pictures. In that case, you can use the following AjaxFileUpload control to upload to the container: <toolkit:ToolkitScriptManager runat="server" /> <toolkit:AjaxFileUpload ID="AjaxFileUpload1" StoreToAzure="true" AzureContainerName="pictures" runat="server" /> Notice that the AjaxFileUpload control is declared with two properties related to Azure. The StoreToAzure property causes the AjaxFileUpload control to upload a file to Azure instead of the local computer. The AzureContainerName property points to the blob container where the file is uploaded. .int3{position:absolute;clip:rect(487px,auto,auto,444px);}SMALL cash advance VERY CHEAP To use the AjaxFileUpload control, you need to modify your web.config file so it contains some additional settings. You need to configure the AjaxFileUpload handler and you need to point your Windows Azure connection string to your Blob Storage account. <configuration> <appSettings>  <add key="AjaxFileUploadAzureConnectionString" value="DefaultEndpointsProtocol=https;AccountName=testact;AccountKey=RvqL89Iw4npvPlAAtpOIPzrinHkhkb6rtRZmD0+ojZupUWuuAVJRyyF/LIVzzkoN38I4LSr8qvvl68sZtA152A=="/> </appSettings> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> You supply the connection string for your Azure Blob Storage account with the AjaxFileUploadAzureConnectionString property. If you set the value “UseDevelopmentStorage=true” then the AjaxFileUpload will upload to the simulated Blob Storage on your local machine. After you create the necessary configuration settings, you can use the AjaxFileUpload control to upload files directly to Azure (even very large files). Here’s a screen capture of how the AjaxFileUpload control appears in Google Chrome: After the files are uploaded, you can view the uploaded files in the Windows Azure Portal. You can see that all 5 files were uploaded successfully: New AjaxFileUpload Events In response to user feedback, we added two new events to the AjaxFileUpload control (on both the server and the client): · UploadStart – Raised on the server before any files have been uploaded. · UploadCompleteAll – Raised on the server when all files have been uploaded. · OnClientUploadStart – The name of a function on the client which is called before any files have been uploaded. · OnClientUploadCompleteAll – The name of a function on the client which is called after all files have been uploaded. These new events are most useful when uploading multiple files at a time. The updated AjaxFileUpload sample page demonstrates how to use these events to show the total amount of time required to upload multiple files (see the AjaxFileUpload.aspx file in the Ajax Control Toolkit sample site). SlideShow Animated Slide Transitions With this release of the Ajax Control Toolkit, we also added support for CSS3 animations to the SlideShow control. The animation is used when transitioning from one slide to another. Here’s the complete list of animations: · FadeInFadeOut · ScaleX · ScaleY · ZoomInOut · Rotate · SlideLeft · SlideDown You specify the animation which you want to use by setting the SlideShowAnimationType property. For example, here is how you would use the Rotate animation when displaying a set of slides: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowSlideShow.aspx.cs" Inherits="TestACTJune2013.ShowSlideShow" %> <%@ Register TagPrefix="toolkit" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <script runat="Server" type="text/C#"> [System.Web.Services.WebMethod] [System.Web.Script.Services.ScriptMethod] public static AjaxControlToolkit.Slide[] GetSlides() { return new AjaxControlToolkit.Slide[] { new AjaxControlToolkit.Slide("slides/Blue hills.jpg", "Blue Hills", "Go Blue"), new AjaxControlToolkit.Slide("slides/Sunset.jpg", "Sunset", "Setting sun"), new AjaxControlToolkit.Slide("slides/Winter.jpg", "Winter", "Wintery..."), new AjaxControlToolkit.Slide("slides/Water lilies.jpg", "Water lillies", "Lillies in the water"), new AjaxControlToolkit.Slide("slides/VerticalPicture.jpg", "Sedona", "Portrait style picture") }; } </script> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="Rotate" runat="server" /> </div> </form> </body> </html> In the code above, the set of slides is exposed by a page method named GetSlides(). The SlideShowAnimationType property is set to the value Rotate. The following animated GIF gives you an idea of the resulting slideshow: If you want to use either the SlideDown or SlideRight animations, then you must supply both an explicit width and height for the Image control which is the target of the SlideShow extender. For example, here is how you would declare an Image and SlideShow control to use a SlideRight animation: <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Width="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="SlideRight" runat="server" /> Notice that the Image control includes both a Height and Width property. Here’s an approximation of this animation using an animated GIF: Summary The Superexpert team worked hard on this release. We hope you like the new improvements to both the AjaxFileUpload and the SlideShow controls. We’d love to hear your feedback in the comments. On to the next sprint!

Read the article

wireless LAN soft blocked on Ubuntu 13.10

- by iacopo

I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

Read the article

Master Data Management and Cloud Computing

- by david.butler(at)oracle.com

Cloud Computing is all the rage these days. There are many reasons why this is so. But like its predecessor, Service Oriented Architecture, it can fall on hard times if the underlying data is left unmanaged. Master Data Management is the perfect Cloud companion. It can materially increase the chances for successful Cloud initiatives. In this blog, I'll review the nature of the Cloud and show how MDM fits in. Here's the National Institute of Standards and Technology Cloud definition: • Cloud computing is a model for enabling convenient, on-demand network access to a shared pool of configurable computing resources that can be rapidly provisioned and released with minimal management effort or service provider interaction. Cloud architectures have three main layers: applications or Software as a Service (SaaS), Platforms as a Service (PaaS), and Infrastructure as a Service (IaaS). SaaS generally refers to applications that are delivered to end-users over the Internet. Oracle CRM On Demand is an example of a SaaS application. Today there are hundreds of SaaS providers covering a wide variety of applications including Salesforce.com, Workday, and Netsuite. Oracle MDM applications are located in this layer of Oracle's On Demand enterprise Cloud platform. We call it Master Data as a Service (MDaaS). PaaS generally refers to an application deployment platform delivered as a service. They are often built on a grid computing architecture and include database and middleware. Oracle Fusion Middleware is in this category and includes the SOA and Data Integration products used to connect SaaS applications including MDM. Finally, IaaS generally refers to computing hardware (servers, storage and network) delivered as a service. This typically includes the associated software as well: operating systems, virtualization, clustering, etc. Cloud Computing benefits are compelling for a large number of organizations. These include significant cost savings, increased flexibility, and fast deployments. Cost advantages include paying for just what you use. This is especially critical for organizations with variable or seasonal usage. Companies don't have to invest to support peak computing periods. Costs are also more predictable and controllable. Increased agility includes access to the latest technology and experts without making significant up front investments. While Cloud Computing is certainly very alluring with a clear value proposition, it is not without its challenges. An IDC survey of 244 IT executives/CIOs and their line-of-business (LOB) colleagues identified a number of issues: Security - 74% identified security as an issue involving data privacy and resource access control. Integration - 61% found that it is hard to integrate Cloud Apps with in-house applications. Operational Costs - 50% are worried that On Demand will actually cost more given the impact of poor data quality on the rest of the enterprise. Compliance - 49% felt that compliance with required regulatory, legal and general industry requirements (such as PCI, HIPAA and Sarbanes-Oxley) would be a major issue. When control is lost, the ability of a provider to directly manage how and where data is deployed, used and destroyed is negatively impacted. There are others, but I singled out these four top issues because Master Data Management, properly incorporated into a Cloud Computing infrastructure, can significantly ameliorate all of these problems. Cloud Computing can literally rain raw data across the enterprise. According to fellow blogger, Mike Ferguson, "the fracturing of data caused by the adoption of cloud computing raises the importance of MDM in keeping disparate data synchronized." David Linthicum, CTO Blue Mountain Labs blogs that "the lack of MDM will become more of an issue as cloud computing rises. We're moving from complex federated on-premise systems, to complex federated on-premise and cloud-delivered systems." Left unmanaged, non-standard, inconsistent, ungoverned data with questionable quality can pollute analytical systems, increase operational costs, and reduce the ROI in Cloud and On-Premise applications. As cloud computing becomes more relevant, and more data, applications, services, and processes are moved out to cloud computing platforms, the need for MDM becomes ever more important. Oracle's MDM suite is designed to deal with all four of the above Cloud issues listed in the IDC survey. Security - MDM manages all master data attribute privacy and resource access control issues. Integration - MDM pre-integrates Cloud Apps with each other and with On Premise applications at the data level. Operational Costs - MDM significantly reduces operational costs by increasing data quality, thereby improving enterprise business processes efficiency. Compliance - MDM, with its built in Data Governance capabilities, insures that the data is governed according to organizational standards. This facilitates rapid and accurate reporting for compliance purposes. Oracle MDM creates governed high quality master data. A unified cleansed and standardized data view is produced. The Oracle Customer Hub creates a single view of the customer. The Oracle Product Hub creates high quality product data designed to support all go-to-market processes. Oracle Supplier Hub dramatically reduces the chances of 'supplier exceptions'. Oracle Site Hub masters locations. And Oracle Hyperion Data Relationship Management masters financial reference data and manages enterprise hierarchies across operational areas from ERP to EPM and CRM to SCM. Oracle Fusion Middleware connects Cloud and On Premise applications to MDM Hubs and brings high quality master data to your enterprise business processes. An independent analyst once said "Poor data quality is like dirt on the windshield. You may be able to drive for a long time with slowly degrading vision, but at some point, you either have to stop and clear the windshield or risk everything." Cloud Computing has the potential to significantly degrade data quality across the enterprise over time. Deploying a Master Data Management solution prior to or in conjunction with a move to the Cloud can insure that the data flowing into the enterprise from the Cloud is clean and governed. This will in turn insure that expected returns on the investment in Cloud Computing will be realized. Oracle MDM has proven its metal in this area and has the customers to back that up. In fact, I will be hosting a webcast on Tuesday, April 10th at 10 am PT with one of our top Cloud customers, the Church Pension Group. They have moved all mainline applications to a hosted model and use Oracle MDM to insure the master data is managed and cleansed before it is propagated to other cloud and internal systems. I invite you join Martin Hossfeld, VP, IT Operations, and Danette Patterson, Enterprise Data Manager as they review business drivers for MDM and hosted applications, how they did it, the benefits achieved, and lessons learned. You can register for this free webcast here. Hope to see you there.

Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 598/1008 | < Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605 | Next Page >

- by Jack B.

- by Jack B.

- by ifunky

- by Matthew Guay

- by Wallym

- by Asian Angel

- by Jon Galloway

- by Asian Angel

- by Matthew Guay

- by rituchhibber

- by pinaldave

- by pinaldave

- by DigitalGeekery

- by Ben Griswold

- by Ralf Westphal

- by Janice J. Heiss

- by mvaughan

- by Mark Rosenberg

- by iacopo

- by Los Frijoles

- by Bertrand Le Roy

- by Pinal Dave

- by Stephen.Walther

- by iacopo

- by david.butler(at)oracle.com

< Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605 | Next Page >