Search Results

Search found 47506 results on 1901 pages for 'system sounds'.

Page 598/1901 | < Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605  | Next Page >

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• How do Windows 7 encrypted files look like?

  - by Sean Farrell

  Ok this is kind of an odd question: How do Windows 7 (Home Premium) encrypted files look like "from the outside"? Now here is the story. An acquaintance of a freind of mine got a nasty virus / scareware. So I wiped out my PC technician cap and went to work on it. What I did was remove the drive from the laptop and put drive into my external drive bay. I scanned the drive and yes it was loaded with stuff. That basically cured the infection and I could start the system back up. To check if it cured the problem I wanted to see the system while running. There where two user accounts, on with a password and one without (both admin users !?!). So I logged into the unprotected user and cleaned up the residual issues, like proxy server to localhost in the browser config. Now I wanted to do the same for the password protected user. What I noticed that from my system and the unprotected user account the files of the protected user looked garbled. The files are something like 12 random alphanum chars, but the folders looked ok. Naive as was thought this might be how encrypted files looked "from the outside". (I never use Microsoft's own security features, so how would I know. TrueCrypt is one big blob.) Since the second user could not be reached, I though sod it and removed the password from the account. (That might have been a mistake, I know.) Now I did the same clean up tasks and all nice and fine; except for the files which where still "encrypted". So I looked into many Windows Encrypted Files recovery posts and not all hope is lost, since I should be able to extract the certificate and with the password regain access to the files. Also note that windows did "only" prompt me that removing the password would be insecure, not that access to encrypted files would be lost, like it is claimed in most recovery articles. Resetting the password did not help and I gave up for the night. The question that nagged me half of the last night was, what if the files are not encrypted, but the scare-ware encrypted / destroyed the files? I don't want to spend hours of work trying to recover files that are not recoverable. The ting is that the user does not remember turning it on and aren't the files marked in blue and the filename is readable? Many thanks for input from users who have more knowledge about WEF...

  Read the article

• Internet Explorer changes brightness

  - by Sale

  I have a very annoying problem with IE8 on Vista: My screen brightness changes when I view a page with IE. It slowly dimms brightness some 20% - enough to be noticeable. This seems to be dependent on the OVERALL brightness of the page viewed or of the amount of bright space on the page... sometimes it dimms down if the page is bright, sometimes the complete different, it dimms when lot of dark space is on the page. I know this sounds weird, I cannot describe it better. It takes about one,two seconds from on brightness level to the other. This ONLY occurs in IE - not in Word or any other application. Please help! This dimming is very stressfull for my eyes.

  Read the article

• OS2/Warp - Remotely Stop and Restart a Program

  - by Justin S

  Our current phone system runs off of a legacy OS2/Warp box. Periodically we have to log into the machine and restart OS2RSD.exe and then start it again and the phone system starts working again. The problem is we have to physically get in front of the box and use the GUI to stop and restart the process. Is it possibly to remotely run a script to kill OS2RSD.exe if its running and then start it again? I have been unable to figure this out on my own. The OS is OS2/Warp Version 3 if that helps.

  Read the article

• What is the effect on LVM snapshot size when a file block is rewritten with it's original contents?

  - by NevilleDNZ

  I'm exploring using LVM snapshot's to off site incremental archives from a snapshot "master" file system. In essence: simply copy across only the files on the "master" that have changed since the last incremental copy to the "archive". Then snapshot the "archive" to retain the incremental. I am a bit puzzled as to the block usage behaviour of the archive's own incremental snapshot. I'm expecting that LVM is not smart enough to know that the "file block" is actually unchanged, and the a new copy will be allocated and written for the fresh "archive" file system. Can anyone confirm this, or point me to a document/page that gives some hints? BTW: the OS hard disk cache, hard disk physical cache and hard disk itself also doesn't need to do any actual "disk writes" as the "disk block" likewise is unnecessary. Any pointers to discussion of this style of optimisation would also be ineresting.

  Read the article

• Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

  - by Shoshomiga

  I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

  Read the article

• port redirection on solaris 11

  - by mo3lyana

  I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

  - by wjlafrance

  Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• Few questions about SLI

  - by toomanyairmiles

  Hi all, thanks in advance for your help. I've just added a second card to my system so I can add a third monitor. I'd got as far as determining both cards need to use the same driver (after a blind alley with another cheap ATi card) so I'm now the proud owner of a second BFG 9800 GTX+ card. One is a BFG OCX and the other an BFG OC (small difference in clock speeds but they are in all other respects the same) but wanted to know the following:- 1) Is it worth adding the SLI connector, will it really boost overall performance (I'm guessing that the OCX card will then perform as the OC card does)? 2) Are SLI connectors (the one's that run across the top of the cards) motherboard or manufacturer specific? 3) If I do SLI the cards will I still be able to use all four monitor connectors or just the two on the master card? I'm not a gamer, I'm an IA and web designer so the system is mostly for Photoshop and Illustrator work and the occasional knock around in command and conquer.

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

  - by Software Monkey

  I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

  Read the article

• webmail suite recommendation

  - by hoball

  Hello, I have serveral emails in a few domains (email@domain1, email@domain2, email@domain3). Currently they are on an owned email server and I am collecting emails via IMAP protocol (i would not like to use POP..) in Thunderbird. I have a few partners and I want to allow them to access the same email address. Here is what I desired: All users can open All the inboxes via IMAP @ Thunderbird (with proper configuration) at the same time, there are a webmail system, every user can login their account (userA, userB, userC), and they will see all inboxes (email@domain1, email@domain2, email@domain3) Would you recommend any suite that fits my needs? Either (a system to be installed on my server) or (a remote service where I need to config MX records) will do. Thank you.

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• Installed Java 7, but terminal still shows Java 6

  - by chipbk10

  I've installed Java 7 on my Mac (10.7.5), but in the terminal there is still java 6. java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) There will be no problem with the version 6 on terminal, if I always got that errors when I tried to install a java application (LatexDraw): : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 The problem is related to instability of java 6 inferred from this link I've read this installed-java-7-on-mac-osx-but-terminal-is-still-using-version-6 and also try to change my Java version by using export JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home", but in my folder /System/Library/Frameworks/JavaVM.framework/Versions, there is no version 1.7, only versions under 1.6 ??? So, how can I fix this issue?

  Read the article

• Color Calibrate Dual Monitor XP SP2

  - by Laramie

  This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

  Read the article

• Missing disk space in Windows XP

  - by Jørn Schou-Rode

  On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

  Read the article

• Windows Server 2003 - passwordless access to \\myhost\ but not \\myhost.mydomain.net\

  - by Charles Duffy

  I have a Windows Server 2003 system on which passwordless access to local UNC paths is possible using the server's unqualified hostname or its IP address, but not via its FQDN -- even when the hosts file is used to map that FQDN directly to 127.0.0.1. That is: \\127.0.0.1\ - passwordless \\myhost\ - passwordless \\myhost.mydomain.com\ - brings up an authentication dialog Unfortunately, I have a local application trying to resolve UNC paths including the host's FQDN. I've tried resolving myhost.mydomain.com to 127.0.0.1 in both hosts and lmhosts, and calling ping myhost.mydomain.com at the command prompt gives the appearance that this resolution has taken effect; even so, attempting to open \\myhost.mydomain.com\ from Windows Explorer brings up a password prompt, while \\127.0.0.1\ does not. The system is using an OpenDirectory server (Apple's Kerberos+LDAP directory service) for authentication.

  Read the article

• ATI Radeon Drivers works with which linux distribution and version?

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. UPDATE: The kind of problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta Thanks

  Read the article

• Approach for monitoring internet backbone traffic volume

  - by Greg Harman

  I'm interested in getting a picture of relative volume across different internet backbones. In particular, I'd like to see how traffic volume over a given route differs over the course of a day or from one day to the next. InternetTrafficReport.com is the closest approximation to this that I've found online, and their approach is to test ping times to a number of key routers from several geographically-dispersed servers. This sounds like one straightforward way to measure, but I don't have several geographically-dispersed servers. Is there a different approach for sampling this type of information from a single server?

  Read the article

• Thermal risks to other components when watercooling CPU

  - by B Sharp

  I recently ordered all the components for a new desktop system to replace my old, dying computer. I wanted to have a really quiet desktop, so I got a case rated for being quiet and opted to try a closed-system CPU water cooling kit (Antec Kuhler H2O 620) that was on sale for a very good price over the Thanksgiving weekend. Most of my components are still in transit, but I became somewhat worried when a friend mentioned that abandoning air cooling units can result in heat buildup inside the case due to heat generated by the video card and other components such as RAM, the northbridge, MOSFETs and voltage regulators radiating heat that the CPU fan would normally at least keep circulating around so it doesn't build up in localized areas. Is this a realistic problem? What other precautions should I take to remove heat from other components? Adding more case fans seems like it would get really noisy. Are there quiet alternatives?

  Read the article

• Client-based program to track response time for online webservice

  - by Søren Haagerup

  I am helping a customer with general IT support, and they have a problem with a hosted web-based system being slow. The provider of the system blames the client's computer, and the client calls me for help. I blame the provider, but it is hard to get them to do something about it without rock-solid evidence. And every time the provider comes around for a TeamViewer session, everything of course runs smoothly. Does there exist a client program or browser plugin that tracks statistics about response time for specific web services?

  Read the article

• User Profile modified dates don't match....what is the difference?

  - by Sean Perkins

  This question came up while I was investigating a server that randomly restarted last night. I was looking through the event logs to see if someone manually restarted the system, but nothing was identified. I went to C:\Users and there wasn't a single profile that had a modify date in a couple of years. When went to User Profiles by way of the System Properties window, I found that a handful of accounts logged in as recently as today. Those same names match to C:\Users, but the modify dates do not match. Why is this?

  Read the article

• Non-Windows, non-Unix-like OS's?

  - by dsimcha

  Since most operating systems I've heard of besides Windows seem to derive their heritage from Unix, I've been curious whether any OS's with the following characteristics exist: Not generally considered Unix-like, i.e. wasn't designed with Unix compatibility as a primary goal, doesn't use X11 as its default GUI in the most common distributions, doesn't support Unix commands by default, etc. Not in the Windows NT family. Is a modern production operating system, not a purely legacy operating system, a research/hobby project or an OS that's still in an alpha state. Is targeted at commodity x86/x64 PC hardware.

  Read the article

• Exim force TLS for specific destination domain

  - by helpmhost

  Hi, I need to configure Exim to require TLS when sending emails to a specific domain. I know that I can use hosts_require_tls = host in the smtp transport. But it sounds like that requires that I set the host of the receiving mail server. I would instead like to specify the domain. Also, if I use this, will all other hosts/domains work without TLS? Just want to confirm before I implement. Thanks.

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

< Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605  | Next Page >