Search Results

Search found 85480 results on 3420 pages for 'change data capture'.

Page 599/3420 | < Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >

• Windows 7 on an EEE PC 901 - Is it a practical change?

  - by Dave

  I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

  Read the article

• How to change mod_rewrite to avoid {REQUEST_FILENAME} in order to get around 255 character URL limit?

  - by Jeremy Reimer

  According to this answer: max length of url 257 characters for mod_rewrite? there is a maximum 255 character hard limit based on the file system for using mod_rewrite. According to the accepted answer, there are two solutions: Change the URL format of your application to a max of 255 characters between each slash. Move the Rewrite rules into the apache virtual host config and remove the REQUEST_FILENAME. I cannot use the first method, so I am trying to figure out the second. I have put the Rewrite rules into the Apache virtual host config as requested. However I cannot figure out how to remove the REQUEST_FILENAME and still have my web application framework (Dragonfly) still work. Here is the portion of the rewrite rules that I moved from .htaccess into the virtual host config file of Apache: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l RewriteCond %{REQUEST_FILENAME} !-f [OR] # if don't want Dragonfly to process html files comment # out the line below (you may need to remove the [OR] above too). RewriteCond %{REQUEST_FILENAME} \.(html|nl)$ # Main URL rewriting. RewriteRule (.*) index.cgi?$1 [L,QSA] I've tried removing {REQUEST_FILENAME} and it just breaks the framework in various ways. How do I rewrite this without using {REQUEST_FILENAME}?

  Read the article

• Safe mode boot with no change on screen but ongoing hard disk activity - why?

  - by omatai

  I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

  Read the article

• Why does the file date always change to the current date?

  - by Marshall

  We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

  Read the article

• How to change controller numbering/enumeration in Solaris 10?

  - by Jim

  After moving a Solaris 10 server to a new machine, the rpool disk is now c1t0d0. We have some third party applications hard coded for c0t0d0. How can I change the controller enumeration on this machine? There is no longer a c0. I've tried rebuilding the /etc/path_to_inst, but the instance numbers don't seem to match up with the controller numbers. Also, it's not clear if i86pc platforms use this file. I've tried devfsadm -C to clear the dangling links, but I'm not sure how to cause devfsadm to start numbering from 0 again (or force certain devices in the tree to a specific controller number). Next I am going to try to create the symlinks manually in /dev/dsk and rdsk to point to the correct /devices. I feel like I am going way off path here. Any suggestions? Thanks Update: This is on virtual ESXi hardware with an additional pass-through HBA. There is no controller 0 on the machine, that is for sure. devfsadm -C cleans up all the c0 device symlinks but keeps the already linked controllers at their current ids.

  Read the article

• Is there a way to force spam-filter to change their policy or remove them as recognized spam service?

  - by Alvin Caseria

  As per mxtoolbox I got 1 blacklist still active for quite sometime now. UCEPROTECTL1's is running on 7 day policy since last spam mail. This is too strict compared to the 98 other spam filters out there as per mxtoolbox. (Or at least to the other 4 that detected the problem) I have no problem with our e-mail since it is hosted locally. But our domain is hosted outside the country and it run on a different IP. I contacted them but since it is the spam-filter's rule, there's nothing to be done but wait. I do believe services like spam-filters should at lease be bounded by guidelines and standards for this matter. Otherwise problem on delivering valid (after the fix) e-mails will be disastrous. Is there a way to force UCEPROTECT to change their policy or remove them as recognized spam service? Apart from contacting them in case they do not answer. Currently they are charging for fast removal if you pay by PayPal. I'm still looking for guideline/standard on how they should operate regarding this matter. Appreciate the help.

  Read the article

• Monitoring / metric collection for system collectives that change a lot in time (a.k.a. cloud)

  - by Florin Andrei

  When your server fleet doesn't change a lot in time, like when you're using bare-metal hosting, classic monitoring and metric collection solutions (Nagios, Munin) work well. But if the number of systems varies a lot in time, and may in fact vary rapidly, classic software is more difficult to setup and use. E.g., trying to make Nagios (monitoring) keep up with a rapidly evolving cloud infrastructure can be cumbersome. Same for Munin (metric collection). It's not just the configuration, but the way the information is conveyed to the user, or displayed, is inadequate for the cloud. What are some possible alternatives that work well with the cloud? The goals are to collect and display metrics (analog to Munin), and generate alerts when certain metrics go out of bounds or when certain services are unavailable (analog to Nagios), and do everything in a cloud-friendly manner. Some cloud providers offer monitoring / metric collection as services, but not always, and if you use more than one provider you don't want to become too dependent of just one vendor. So provider-independent solutions are required. EDIT: I am asking this question in a general fashion - not limited to any given cloud infrastructure (like OpenStack), but in the general case of using arbitrary cloud providers.

  Read the article

• How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

  - by Abs

  I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

  Read the article

• Can I replicate data between mySQL and SQL Server/SQL Azure?

  - by Ernest Mueller

  I have a replicated mySQL setup running happily on Amazon AWS, making user data available locally in various regions. Now I'm faced with an app that needs to go up on Microsoft Azure and I need to replicate the data over to there as well. So that's annoying. I am faced with several options: Replicate from mySQL to SQL Azure/SQL Server seems like it would be lovely - is this possible? I'd consider using a third party tool and paying $$ if I had to. We're not using anything complicated in the db feature set, it's just data in tables. Get mySQL working on Microsoft Azure - which seems really dicey at best. All the HOWTOs I can find say "this is possible but you really shouldn't try this for production apps." Go non-realtime and do syncs from mySQL to SQL Azure, which may be somewhat expensive and slower. Rip out all my mySQL on Amazon and use SQL Server there, which would make Baby Jesus cry. Has anyone gotten mySQL to SQL Azure/SQL Server replication or syncing working? Or have any other approaches (a NoSQL solution that replicates and might meet our but-we-need-to-join-some-tables needs that can easily be run on Amazon and Azure)?

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

  - by Chadddada

  I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

  Read the article

• pg_dump not working - do I need to change order of $PATH?

  - by A4J

  I'm trying to set the $PATH to pick up the latest version of pg_dump as I'm currently getting a mismatch error while doing a migrate in my Rails app (I recently changed the schema type to SQL). I have added a new file in /etc/profile.d called pg_dump.sh, and inside that put: PG_DUMP=/usr/pgsql-9.1 export PG_DUMP PATH=$PATH:$PG_DUMP/bin export PATH On looking at echo $PATH, I get: /usr/local/rvm/gems/ruby-1.9.3-p194/bin:/usr/local/rvm/gems/ruby-1.9.3-p194@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p194/bin:/usr/local/rvm/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pgsql-9.1/bin:/root/bin And I still get the error. Do I need to change the order? If so any ideas how? Output of 'ls /usr/pgsql-9.1/bin': clusterdb droplang pg_archivecleanup pg_ctl pg_standby psql createdb dropuser pg_basebackup pg_dump pg_test_fsync reindexdb createlang ecpg pgbench pg_dumpall pg_upgrade vacuumdb createuser initdb pg_config pg_resetxlog postgres vacuumlo dropdb oid2name pg_controldata pg_restore postmaster And output of 'which pg_dump': /usr/bin/pg_dump Error message on running cap 'deploy:migrate': ** [out :: 46.4.9.199] pg_dump: server version: 9.1.4; pg_dump version: 8.4.11 ** [out :: 46.4.9.199] pg_dump: aborting because of server version mismatch ** [out :: 46.4.9.199] rake aborted! ** [out :: 46.4.9.199] Error dumping database output of 'pg_dump --version': pg_dump (PostgreSQL) 8.4.11

  Read the article

• Is there a way to change the string format for an existing CSR "Country Code" field from UTF8 to Printable String?

  - by Mike B

  CentOS 5.x The short version: Is there a way to change the encoding format for an existing CSR "Country Code" field from UTF8 to Printable String? The long version: I've got a CSR generated from a product using standard java security providers (jsse/jce). Some of the information in the CSR uses UTF8 Strings (which I understand is the preferred encoding requirement as of December 31, 2003 - RF 3280). The certificate authority I'm submitting the CSR to explicitly requires the Country Code to be specified as a PrintableString. My CSR has it listed as a UTF8 string. I went back to the latest RFC - http://www.ietf.org/rfc/rfc5280.txt. It seems to conflict specifically on countryName. Here's where it gets a little messy... The countryName is part of the relative DN. The relative DN is defined to be of type DirectoryString, which is defined as a choice of teletexString, printableString, universalString, utf8String, or bmpString. It also more specifically defines countryName as being either alpha (upper bound 2 bytes) or numeric (upper bound 3 bytes). Furthermore, in the appendix, it refers to the X520countryName, which is limited to be only a PrintableString of size 2. So, it is clear why it doesn't work. It appears that the certificate authority and Sun/Java do not agree on their interpretation of the requirements for the countryName. Is there anything I can do to modify the CSR to be compatible with the CA?

  Read the article

• Can I change a MySQL table back and forth between InnoDB and MyISAM without any problems?

  - by Daniel Magliola

  I have a site with a decently big database, 3Gb in size, a couple of tables with a dozen million records. It's currently 100% on MyISAM, and I have the feeling that the server is going slower than it should because of too much locking, so I'd like to try going to InnoDB and see if that makes things better. However, I need to do that directly in production, because obviously without load this doesn't make any difference. However, I'm a bit worried about this, because InnoDB actually has potential to be slower, so the question is: If I convert all tables to InnoDB and it turns out i'm worse off than before, can I go back to MyISAM without losing anything? Can you think of any problems I might encounter? (For example, I know that InnoDB stores all data in ONE big file that only gets bigger, can this be a problem?) Thank you very much Daniel

  Read the article

• Change the order of IP addresses returned by ifconfig?

  - by erikcw

  I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

  Read the article

• Is it possible to change "working directory" of XeTeX?

  - by Herbert Sitz

  Using XeTeX there are many working files that get created in process of producing the pdf, and they litter the directory where my main .tex file is. Is it possible to change the working directory of XeTeX so that it stores all these scratch files in some other directory, out of the way? There is a previous question on Superuser.com that discusses a utility that cleans up the working files by deleting them after they're produced: http://superuser.com/questions/95712/how-to-avoid-littering-ones-tex-directories-with-intermediate-files That solution doesn't work for me since I'm using XeTeX, but also it seems like it would be preferable to simply be able to designate a "scratch" directory where all working files are saved. I haven't been able to find any info on how to do it though. Is there a way? (My question is prompted partly because of the fact that I often work with files in a directory that is shared using DropBox, so it creates a lot of unnecessary traffic if files are getting created and destroyed willy nilly. I don't know if it affects speed in any way, but the idea of having a separate working directory that is not shared/replicated by DropBox would be a cleaner solution, even if I could use the method suggested in the earlier thread.)

  Read the article

• Is there a faster way to change default apps associated with file types on OS X?

  - by Lri

  Is there anything more convenient than using RCDefaultApp or Magic Launch, or just repeatedly pressing the Change All buttons in Finder's information panels? I thought about writing a shell script that would modify the CFBundleDocumentTypes arrays in Info.plist files. But each app has multiple keys (sometimes an icon) that would need to be changed. lsregister can't be used to make specific modifications to the Launch Services database. $ `locate lsregister` -h lsregister: [OPTIONS] [ <path>... ] [ -apps <domain>[,domain]... ] [ -libs <domain>[,domain]... ] [ -all <domain>[,domain]... ] Paths are searched for applications to register with the Launch Service database. Valid domains are "system", "local", "network" and "user". Domains can also be specified using only the first letter. -kill Reset the Launch Services database before doing anything else -seed If database isn't seeded, scan default locations for applications and libraries to register -lint Print information about plist errors while registering bundles -convert Register apps found in older LS database files -lazy n Sleep for n seconds before registering/scanning -r Recursive directory scan, do not recurse into packages or invisible directories -R Recursive directory scan, descending into packages and invisible directories -f force-update registration even if mod date is unchanged -u unregister instead of register -v Display progress information -dump Display full database contents after registration -h Display this help

  Read the article

• How best to manage my growing data in Excel?

  - by Mike

  This isn't a question about formulas or features in Excel. I'm debating the correct/best way to manage the growing amount of data 'I have to' manage in Excel (I produce PIVOT tables/reports for my management). DATA: I record the number of publications we order: cost, date ordered, start and end of subscription, who requested it, when they ordered it, when I ordered it, will it be cancelled next year, etc, etc, etc. DILEMMA: Obviously we re-order a lot of the same publications, so depending on how I manage the data I could be duplicating all over the place. OPTION 1: So, do I use ROWs = publication name in Row 1 and all the related columns for each financial year are copied and pasted after each financial year ready for the new FY information? This will lead to me going to column ZZ. OPTION 2: Or, do I use COLUMNs = each row has only one FY information for each publication and if we re-order or cancel a publication I re-type the publication name in a row below and fill in appropriate columns? This will lead to a long list of publications down to row 10000, and potential for misspelling of repeat ordered publication names. IDEAS: What's the best way - thinking in terms of pivot table best practice, being able to sum or count easy, report formatting, etc. Any best practices much appreciated.

  Read the article

• Is there a command to change primary group for a new user in Cygwin?

  - by Rob Gilliam

  Is there a way to set a (new) user's primary group in Cygwin's /etc/passwd file without hand-editing the file? I have a local group set up for members of the Dev Team on a Windows Server 2008 R2 box so that we can all modify a particular group files, but the regular users can only read them. As some of the work we do uses scripts that rely on Cygwin tools, this group is also in the /etc/group file. When I need to add a new user to the "Dev Team" group, I add them in Server Manager, and then use mkpasswd to add that user to Cygwin's /etc/passwd file. Unfortunately, they get the regular Domain Users group assigned as their primary group and I then have to go in and edit the passwd file to change the group. I now need to write some instructions for someone else who is not au fait with UNIX/Linux/Cygwin so that they can set up new Dev Team users and obviously "hand editing" /etc/passwd is a recipe for disaster if you don't know what you're doing. So, is there a way of getting mkpasswd to set a different primary group, or another tool like Linux's usermod which can be used for the purpose of changing the group in a more controlled manner?

  Read the article

• Change cell formatting without VBA. Custom formatting?

  - by Sux2Lose

  I have a dropdown field with two values in a form I am creating. The expected data in cell D15 changes depending on the selection. If Option A is selected then a dollar amount is expected. If option B is selected that a percentage is expected. I would like the cell to be formatted as 'accounting' w/ zero decimals for option A and 'percentage' with zero decimals if option B is selected. I do not want to use VBA, if possible. I'm hoping there is a custom formatting solution.

  Read the article

• SBS 2008 R2: Did something change with anonymous relays?

  - by gravyface

  Have noticed that prior documentation on setting up anonymous relays in SBS 2008 no longer work without some additional configuration. Used to be able to follow this documentation, which is basically: setup a new receive connector add the IP address(es) that will be permitted to relay check off "anonymous" under Permission Group and then run the Exchange shell script to grant permissions. Now what seems to be happening is that if the permitted IP address happens to fall within the same address space as another more restrictive Receive Connector (like the "Default SBS08" one) and possibly if it's ahead of the new Receive Connector alphabetically (haven't tested that yet), the relay attempt fails with "Client Was Not Authenticated" error. To get it to work, I had to modify the scope of the "Default SBS08" Receive Connector to exclude the one LAN IP that I wanted to allow relaying for. I can't recall ever having to do this for Exchange 2007 Standard and/or any other SBS 2008 servers I've setup over the last couple of years and I don't remember doing this and the wiki entry I added at the office doesn't mention it either. So my question is, has anyone else experienced this? Has there been a new change with R2 or perhaps an Exchange Service Pack?

  Read the article

• What causes a switch port to receive data not destined for it?

  - by user1693454

  We are having an intermittent fault which is effecting one of our control systems on one of our HP Procurve switches. For some reason, this PLC (10mbit port - 192.168.6.56) which is attached directly to the HP Switch intermittantly start's receiving data which is not destined for it. The data is being sent from a Thecus NAS with latest firmware (192.168.6.218) to a physical IBM Server running Win2003R2 and SAP (192.168.6.225). The problem does not just send to this server, it has been to other physical servers in the past too, but always from the Thecus NAS. I am using a monitor port to wireshark what is going in/out of the PLC - normally there would be about 1mb in/out per 2 or 3 minutes - only a server asking the state of the coils. When the problem occurs, there is a flood of data being put onto the PLC line - in this captured instance, about 67mb in less than a minute. Due to this, there is no way that the PLC can be queried as the port is effectively DOSed, in turn killing part of our factory. I know that having Production on the same vlan as IT is not a good idea - I agree, however it cannot be changed at the moment (will have to wait 3 months), as well as the problem has only started happening in the last 3 months. Here is a screen cap of one of the packets being sent from the Thecus NAS which was captured from the PLC port on the HP Switch: And there are over 700 of these in this one 1024kb file. If anyone has any idea on what could be going on, some help would be greatly appreciated. If you need to know anything more, let me know! Cheers!

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• How can I recover my data from a damaged hard drive?

  - by krk

  a few days ago when I was working on windows my laptop was beaten on the side where the hard drive is located. As a result, it was damaged and I couldn't access the windows partition. I had to boot the linux one, which is working without any trouble. I have 2 partition formatted with ntfs, the one with windows on it, and the other one intended to store data. I mounted the windows partition from ubuntu and I could see all my files. But when I tried to mount the data partition it was impossible. It threw me an error, it couldn't recognize ntfs partition. I try to copy the damaged disk into an external hard drive using the command: dd if=/dev/sda of=/dev/sdb conv=noerror,sync The progress stopped at 60%. I was still unable to mount the data partition. Now I'm trying to backup my files using an utility called Photorec. The problem is that it is recovering my files in a disorderly way, it is all mixed up and I need my original directory structure, it will become an endless task to organize the files as they were before. Is there any way I can get my partition back?

  Read the article

< Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >