Search Results

Search found 19878 results on 796 pages for 'bit pirate'.

Page 600/796 | < Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Truecrypt and hidden volumes

  - by user51166

  I would like to know the opinion of some users using (or not) the hidden volume encryption feature of Truecrypt. Personally until now I never used this feature: on Windows I encrypt the system drive as a standard volume, on GNU/Linux I encrypt using LUKS which is Truecrypt's equivalent to standard volume. As for data I use the standard volume approach as well. I read that this feature is nice and all, but it isn't really used by most people. Do you use it or not? Why? Do you only store inside it VERY sensible data or what else? Because technically speaking doing a hidden volume which has (almost) the same size as the outer one doesn't make sense: the outer volume will be encrypted but no data will be on it, which will appear very strange. So not only one has to plan which data store where, but has even to remember each time to mount the outer volume with hidden volume protection (otherwise there'll be a data loss when writing to it). It's a bit messy: hidden OS + outer OS + outer volume + hidden volume = 4 partitions :( Similar question about the hidden operating system (which I don't use [yet]).

  Read the article

• ffmpeg What's the difference between -to and -t options?

  - by Vantuz

  Command ffmpeg -ss 5:09 -i foo.mkv -to 5:10 -c copy bar.mkv works exactly like ffmpeg -ss 5:09 -i foo.mkv -t 5:10 -c copy bar.mkv Is it a bug? Using Zeranoe git-bd75651 for Windows 64-bit >ffmpeg -version ffmpeg version N-57906-gbd75651 built on Nov 4 2013 18:09:19 with gcc 4.8.2 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 - -disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enabl e-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --ena ble-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmo dplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enab le-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis - -enable-libvpx --enable-libwavpack --enable-libx264 --enable-libxavs --enable-li bxvid --enable-zlib libavutil 52. 51.100 / 52. 51.100 libavcodec 55. 41.100 / 55. 41.100 libavformat 55. 21.100 / 55. 21.100 libavdevice 55. 5.100 / 55. 5.100 libavfilter 3. 90.101 / 3. 90.101 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100

  Read the article

• iPhone all day meeting request bug?

  - by RodH257

  We've come across a bit of a weird bug in the office. our office is closing for a week or so over christmas, and our admin staff sent a meeting request to everyone in the office to go from 5pm on the 23rd of December until we return to work at 8.30 on the 5th. However there was some confusion, as if you look at the image below, the same meeting request is showing up with different start times for some people. While most people get the 5pm date, for others it shows up as an all day event! Staff have been planning their activities for the 23rd only to find out that their calendar is wrong and they are required to work. With some investigation, we noticed that all of the people with the incorrect time own iPhones or iPads. So perhaps they accepted the meeting on their phones, and it has put the meeting in wrong? There are people with the correct one that have iPhones, but perhaps they are on ios4 still, or perhaps they didn't accept the meeting request on their phone. has anyone else come across this error at all? is there a fix?

  Read the article

• WSUS registry file: NoAutoRebootWithLoggedOnUsers entry being ignored

  - by the_pete

  We are using a registry entry to connect our internal workstations to our WSUS server and everything seems to be working except the NoAutoRebootWithLoggedOnUsers entry. Without fail, over the last few weeks, our lab setup as well as our users have been prompted to restart their machines with a 15 minute time out and there's nothing they can do about it. They can't postpone or cancel the restart, all options in the prompt are greyed out. Below is the registry file we are using to connect our workstations to our WSUS server: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "AcceptTrustedPublisherCerts"=dword:00000001 "ElevateNonAdmins"=dword:00000000 "WUServer"="http://xxx.xxx.xxx.xxx:8530" "WUStatusServer"="http://xxx.xxx.xxx.xxx:8530" [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU] "AUOptions"=dword:00000004 "AutoInstallMinorUpdates"=dword:00000001 "DetectionFrequencyEnabled"=dword:00000001 "DetectionFrequency"=dword:00000002 "NoAutoUpdate"=dword:00000000 "NoAutoRebootWithLoggedOnUsers"=dword:00000001 "RebootRelaunchTimeout"=dword:00000030 "RebootRelaunchTimeoutEnabled"=dword:00000001 "RescheduleWaitTime"=dword:00000020 "RescheduleWaitTimeEnabled"=dword:00000001 "ScheduledInstallDay"=dword:00000000 "ScheduledInstallTime"=dword:00000003 "UseWUServer"=dword:00000001 There is a bit of redundancy, if you want to call it that, having both the NoAutoRebootWithLoggedOnUsers entry as well as the entries for RebootRelaunchTimeout but we wanted to see if we could either disable the restart, or give our users a larger window within which they could wrap up their work, etc. before restarting. Neither of these entries seems to work, but our priority is getting NoAutoRebootWithLoggedOnUsers working and any help with this would be greatly appreciated.

  Read the article

• Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

  - by Rob

  Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

  Read the article

• Limited user requires admin rights for plug and play printer?

  - by Kalamane

  I have a small fleet of laptops that aren't part of a domain running Windows XP Pro SP3 as limited users. They are used for printing different shipping documents. I have a script that runs when they start up that uses devcon and prntmngr to detect and install/configure the currently connected usb printers. This lets us deploy the laptops to any printing station with a USB printer and have the printer 'just work' for the end user employee. I've taken the original clone image and have added functionality to it. Since then I've discovered a bit of an issue with using HP LaserJet P1606dn printers. They have started asking for admin rights on setup. This is with and without the script running. Previously they would automatically install because I had installed WHQL plug and play drivers for them. I thought it might have to do with the HP Smart Install Utility but it happens when that is disabled. I don't have a good point to roll back to before this started happening because this was an issue on the image I took initially to start this upgrade. What could be causing this?

  Read the article

• building a debian base image

  - by Michael

  Is there a preferred way to create base images for Debian-based customized installations? We are currently going with multistrap but although it's better than hand-crafted chroot stuff, it still has a lot of edges and corners. Is there a more reliable and less error-prone way to produce a root filesystem of a Debian installation with some additional .debs installed? (I don't want to send out a Debian installer with a preseed file though.) Addendum 1: To clarify things a bit: We are delivering some kind of software appliance to our customers. That is, a debian operating system, with some additional software packages -- both our own and third-party ones -- and some configuration changes. To ease the installation process, we have an installer that does nothing more than partitioning, copying files to the partitions and setting up grub. So it's basically an image-based installer. So we are basically running the debian installation ourselves and just distribute the already installed operating system. The question is about the installation part. I want to have that as easy and robust as possible, and of course, it should be an automated process.

  Read the article

• How do I view source in Outlook 2010?

  - by Martin Duys

  This question has already been asked here; but the answer only gives advice on how to view the email header not the actual html source of the email. There is another question here, which I think may be caused by the same issue as mine, but does not have a satisfactory answer (the answer does not work for the person who posted the question) If I right click on the bottom of an email I can see the option to 'view source' but when I select it nothing happens. I have done a bit of research and came across a post for a much earlier version of Outlook that suggested adding something into the registry. I applied this advice, but it made no difference; but I'm pretty sure that applying this solution correctly for my circumstances will do the trick. When I first received this machine it had a demo version of UltraEdit installed. I uninstalled UltraEdit and installed Notepad++ instead. I am convinced that there is a registry entry that is pointing to UltraEdit as the default view for 'view source' in my email and I need to replace this entry with a reference to Notepad or Notepad++, but I don't know how to do this. Any suggestions?

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• Are there tools available for trimming PDF margins?

  - by Charles Duffy

  I have an ebook I'm trying to read in PDF format on a Kindle. Unfortunately, the page headers and footers have some content (page number and copyright info, respectively) preventing the device from scaling the actual text to match its usable area viewing area, thus leaving the actual content too small to read. Various tools are available which will trim off whitespace, but the Kindle already does this; my goal, by contrast, is to remove printed matter outside of a defined bounding box, and the only tool I've found for the purpose is moderately expensive commercial software. I could probably generate a mask in Inkscape; split out the individual pages using pdftk, apply the mask to each page individually (outputting to postscript), and recombine the numerous postscript files into a single PDF. However, this decode/reencode steps would be pretty unfortunate in terms of document size; something able to operate with a bit more finesse would be ideal. I have all major operating systems handy (Windows, several modern Linux distros, a Mac, etc) so solutions don't need to be constrained by platform. Suggestions? (I've reported the issue to the author, who mentioned it to his editor, who hasn't done anything about the issue over the course of more than a month, making the zero-work approach evidently nonproductive).

  Read the article

• How do I connect to and factory reset a Catalyst 3560 Switch?

  - by Josh

  My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

  Read the article

• Eclipse Indigo freezes on 'Open Type' search

  - by NickGreen

  When I'm trying to search for a Java class with Ctrl-shift-T (Open Type popup), Eclipse freezes when I'm typing 1 character. It usually takes about 8 seconds to 'unfreeze', but sometimes it won't come back at all.. When it freezes, I see that the eclipse process takes about 1Gig of mem and the CPU is about 100%! I've tried creating a new workspace, adjusting the eclipse.ini (perm size, different memory values), starting with -clean and at last reinstall the whole IDE. Nothing helps.. My eclipse.ini: -startup plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.library plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505 -product org.eclipse.epp.package.jee.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 768m --launcher.defaultAction openFile -vmargs -server -Dosgi.requiredJavaVersion=1.5 -Xmn128m -Xms1024m -Xmx1024m -Xss2m -XX:PermSize=128m -XX:MaxPermSize=128m -XX:+UseParallelGC -Djava.library.path=/usr/lib/jni I'm using the following plugins: JRebel and m2e. I'm desperate for a solution because this problems causes me a great deal of time loss. System: Ubuntu 12.04 LTS 64 bit, 4GB mem, Intel core i7 860 @ 2.8 Ghz. Hope somebody knows a solution. Thank you for your time.

  Read the article

• Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

  - by emotionull

  I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

  Read the article

• MysqlTunner and query_cache_size dilemma

  - by wbad

  On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

  Read the article

• Local user vs. domain user? What is the right way here?

  - by ebeeb

  I'm a software developer in a company with 6 employees. Everyone has a machine for him-/herself, so none of the machines is shared. I'm currently setting up my machine with Windows 8 and was experimenting a bit with domain and local user accounts. Correct me please if I'm wrong, but I think the idea behind is, that domain users generally should not be able to modify the configuration of a machine (like installing software), since they are able to login on every single machine in the domain. The local user (usually just one local administrator per machine) is the one who cares about the configuration of the machine. But in my case the login into the domain is just for being able to access directories/servers in the domain (I do not really know the details, all I know is, that loggin into the domain user account is necessary). So overall I've got a local admin account and a domain account used on my machine. While working I'm logged in to my domain user account. But it annoys me, that I always need to enter the credentials of my local user account when I'm about to update/install something, which happens quite often as a software developer. I fixed this with adding the domain account into the user accounts in my control panel and putting it into the Administrators group. The only thing I wanted to know about this: is there something REALLY bad about doing this? Or is there maybe a more common way to be able to act like a local admin, while logged in as a domain user? PS: I'm sorry about the tags, but I don't know the proper ones. I'd be glad if some of the superuser experts could fix this :-)

  Read the article

• Should I buy more RAM for my computer or a better CPU?

  - by Reijer The Coder

  I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

  Read the article

• Security Token for Mac/Linux/Windows, self-managed, pref. open source?

  - by DevelopersDevelopersDevelopers

  I'm looking to buy an evaluation security token (combined smart card/usb reader) for my business that works on: Windows 7 x64 OS X 10.6.x x64 Ubuntu Linux (64 or 32 bit, 10.04 or 10.10, I can bend based on possible tokens) Functionality I need is: Login authentication Authentication for whole-disk encryption (in Linux/Windows, Mac is flexible here) Signing/encryption using PGP and x.509 certificates RSA-2048 key-capable (1024 not good enough.) I can manage the certificates myself Open source middleware/drivers (not necessarily FOSS, just source available. Can flex on this, I just want to be able to audit the code. OpenSC-compatible on Linux would be great.) Is there any token that can do all of this? Or would I need multiple ones to accomplish this? Or do I need to look at smart cards and readers to get this? I have been researching this for a while and have had a heck of a time even getting accurate information about products. Also, I am in the USA, and it appears that EU export laws prevent me from buying from there, so those vendors are out. I was looking at Feitian tokens from Gooze, but since they are in France I can't buy.

  Read the article

• Windows 7 Laptop Randomly Sleeping

  - by Josh Arenberg

  I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• Apache https is slow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• Linksys SFE2000 Interface

  - by boburob

  I have a real problem with a layer 3 Linksys switch. First, every time it looses power, it seems to reset back to an older config. Not only this, but when this happens it looses interface settings on one subnet. This would not be a problem but I am completely unable to get to the interface on the working side. It allows me to log on and then just displays a blank screen. I have tried this on: IE6 IE7 IE8 IE9 Firefox 3.5 Opera Chrome All with the same results, except for Opera, which loads half the interface but nothing I can really use. I really need to get onto this switch so I can sort out routing and VLAN tagged ports, so if anyone has any ideas on either of these issues please let me know ASAP! Thanks! Also, due to its location and my lack of laptops with serial connections I cannot putty into it. UPDATE: Looked into this a bit more and it looks like this model of switch does not save the current config to boot unless you make sure to save it yourself, which explains the first issue, however the broken interface is more worrying!

  Read the article

• Centralized backup method recommendation for SMEs with various OSes

  - by Akinator

  Hi I was wondering what in your opinion is the "best" method for having "everything" backed-up in the following situation. We are a SMEs with 10 computers in total. Three of those computers are MACs The rest are windows (1 vista, 4 win7 and 2 XPs) I'm very open to what the method should be but you should also consider the follwing: Very limited resources Quite "small" bandwidth (4 MBs for all (download) 0.4 MBs (upload, yep, thats it)- though this might get, a little bit better) One of the main thing to back up would be the mails, considerations: All windows computers use outlook, mainly 2003 There is one mac that uses outlook too (for mac of course - not 2011 yet) We also have to backup the files: Not a huge amount Very few very big files Very organizes (by machine) What I would like is to hear your opinions as to which would be the best method (or combination of methods - preferably one of course) considering. We are not sure what do we need and I'm open to suggestions, though an online (cloud based applications) would be great, remember the the bandwidth is unbearable. Last think to consider, it that we would like to do weekly updates (unless the method is very easy of course). Thanks in advance!! I tried to be as specific as possible, but if anything is needed I'll gladly update, please ask for any clarification needed! Please avoid any answers like upgrade all to windows 7 and throw away your macs :) our's may not be an ideal situation, but it is what it is, and right now, it would be impossible for us to change it for a lot of circumstances.

  Read the article

• Role of MBR in the booting process

  - by pg4421

  I am new to stack overflow. So please correct me if my question seems irrelevant or stupid. I read here in Booting Process : The job of the primary boot loader is to find and load the secondary boot loader (stage 2). It does this by looking through the partition table for an active partition. When it finds an active partition, it scans the remaining partitions in the table to ensure that they're all inactive. When this is verified, the active partition's boot record is read from the device into RAM and executed. The question is that I am having a Hard disk which has two Operating System images windows and ubuntu and hence both partitions in which they reside are active. Then why do we have only one active partition always? (I know that active partition is one of the primary partition but then why we are giving special reference to one primary partition? ) I am confused a bit. Please solve my query. Thank you so much.

  Read the article

< Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >