Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 600/779 | < Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >

  • USB Device With Embedded Fileserver

    - by Richard Martinez
    I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

    Read the article

  • Is SSL to the proxy good enough?

    - by Josh Smeaton
    We are currently trying to decide on how best to do SSL traffic in our environment. We have an externally facing Apache proxy server that is responsible for directing all traffic into our environment. It is also doing the SSL work for the majority of our servers. There are one or two IIS servers in particular that are doing their own SSL, but they are also behind the proxy. I'm wondering, is SSL to the proxy good enough? It would mean that traffic within our network is identifiable, but is that such a big deal?

    Read the article

  • Ubuntu: nautilus cannot browse samba shares

    - by Alexey Pilipchuk
    Got a problem with browsing samba shares with nautilus in ubuntu i can see workgroups but cannot go any deeper. On the other hand i can use smbclient and mount samba shares from command line. Also i can browse ubuntu shares from windows but not vise versa. So i suspect it is nautilus problem. Moreover it has never been working for me since very first ubuntu i used. Systems i tryed to browse shares on: Ubuntu 8-12 Windows Xp 7 Dune HD Max Could someone provide me with ideas how to diagnose this issue? Or describe how network browsing is implemented in nautilus Thanx in advance

    Read the article

  • Ubuntu 12.04 Transparent proxy gateway

    - by user146536
    i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

    Read the article

  • Bind dns server in Solaris 10 and win xp clients

    - by stevecomptech
    Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

    Read the article

  • Uralelektrostroy Improves Turnaround Times for Engineering and Construction Projects by Approximately 50% with Better Project Data Management

    - by Melissa Centurio Lopes
    LLC Uralelektrostroy was established in 1998, to meet the growing demand for reliable energy supply, which included the deployment and operation of a modern power grid system for Russia’s booming economy and industrial sector. To rise to the challenge, the country required a company with a strong reputation and the ability to strategically operate energy production and distribution facilities. As a renowned energy expert, Uralelektrostroy successfully embarked on the mission—focusing on the design, construction, and operation of power grids, transmission lines, and generation facilities. Today, Uralelektrostroy leads the Russian utilities industry with operations across the country, particularly in the Ural, Western Siberia, and Moscow regions. Challenges: Track work progress through all engineering project development stages with ease—from planning and start-up operations, to onsite construction and quality assurance—to enhance visibility into complex projects, such as power grid and power-transmission-line construction Implement and execute engineering projects faster—for example, designing and building power generation and distribution facilities—by better monitoring numerous local subcontractors Improve alignment of project schedules with project owners’ requirements—awarding federal and regional authorities—to avoid incurring fines for missing deadlines Solutions: Used Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 to streamline communication with customers and subcontractors through better data management and harmonized reporting, reducing construction project implementation and turnaround times by approximately 50%, on average Enabled fast generation of work-in-progress reports that track project schedules, budgets, materials, and staffing—from approval and material procurement, to construction and delivery Reduced the number of construction sites by nearly 30% (from 35 to 25) by identifying unprofitable sites—streamlining operations at the company’s construction site network and increasing profitability Improved project visibility by enabling managers to efficiently track project status, ensuring on-time reporting and punctual project deliveries to federal customers to reduce delay penalties to zero “Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 drastically changed the way we run our business. We’ve reduced the number of redundant assets, streamlined project implementation and execution, and improved collaboration with our customers and contractors. Overall, the Oracle deployment helped to increase our profitability.” – Roman Aleksandrovich Naumenko, Head of Information Technology, LLC Uralelektrostroy Read the complete customer snapshot here.

    Read the article

  • AuthInfoRequired cups overwrites

    - by mooscape
    My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

    Read the article

  • What are my X client options for MS Windows?

    - by Nick Bolton
    I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

    Read the article

  • Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

    - by tlianza
    I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

    Read the article

  • Can't connect to the internet in Windows Vista

    - by Kola
    I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

    Read the article

  • Unable to connect to remote MS SQL Server 2008 Express SP3 instance by name

    - by Max
    I am trying to connect to a remote MS SQL Server 2008 SP3 x86 Instance using it's name. At the first glance all seems to work well (e.g. it is possible to connect to the server locally and succesfully telnet it's port remotely), but there is a thing I can't understand... This line should connect us to the default instance of remote SQL Server: osql -S ServerIP -d MyDatabase /U sa -P MyPassword and it does the trick, however the next one: osql -S ServerIP\MyInstance -d MyDatabase /U sa -P MyPassword ends up with the following error: [SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The only instance running on the server is MyInstance, which is (I guess) the default one. Could you please put some time in explaining the issue.

    Read the article

  • Full Access user removed from NTFS Share

    - by TJ
    I don't know how it happened but for some reason one of the sub folders in the Network shares (call the share Market and the sub folder Support) no longer has any groups or users with full permissions on the share. The Market top level has users and groups with these permissions and everything is set up for folder inheritance but it's not inheriting permissions from the top level and only has modify permissions for the single group that is in the Access List for the sub folder Support. I can see items in the sub folder but I can not add, edit, or delete permissions to the Support folder. What are my options so I can once again manage permissions?

    Read the article

  • VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

    - by macke
    I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

    Read the article

  • ts_block.vbs and mac intosh

    - by Eric Le breton
    I am using your excellent ts_blocker, release 20120530, on my server 2008 R2 Enterprise. it works very fine, i use the vbs script, launched with wscript. The only problem is that is does not work for users attempting to connect RDP from a mac intosh. With this machine the distant IP seems to be not recognized when the login fails. The IP is visible when the login is good (event ID 4624) but not when it fails (Audit failure event ID 4625) : then the IP is not to be seen in the event log ! In the "network information" of the event log entry is nothing given. Have you already been told of that and is there something to do ?

    Read the article

  • How can I tell if a host is bridged and acting as a router

    - by makerofthings7
    I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

    Read the article

  • Today's Links (6/27/2011)

    - by Bob Rhubart
    2011 Entrepreneurs of the Year, Northern California Region Drake Martinet reports on the new batch of entrepreneurs joining the ranks of Oracle CEO Larry Ellison, Yahoo CEO Carol Bartz and eBay co-founder Pierre Omidyar as the Norther California Region winners of Ernst & Young's Entrepreneurs of the Year awards. Technical Article: Caching Strategies for Oracle Service Bus 11g William Markito Oliveira illustrates how the right caching strategy can make a big difference in application performance. Kscope 11 - Day 1 and 2 Oracle ACE Director Markus Eisele checks in from Long Beach. Kaleidoscope 2011: Sunday’s Symposium And so does Oracle ACE Director Marco Gralike. Yet another GlassFish 3.1.1 promoted build | The Aquarium "This version was carefully designed to be highly compatible with the previous 3.x versions," says Alexis, "thus leaving you with little reasons not to upgrade as soon as it comes out this summer." Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now! "The NoSQL databases are not intended to be a replacement for the mainstream RDBMS," says Arun Gupta. I have a performance problem | Alan Hargreaves Good (and entertaining) advice from an Australian Solaris and Network Domain TSC* Principal Field Technologist.

    Read the article

  • Filemaker Server Not Installing and Windows Problems

    - by Shelly
    When I tried installing Filemaker Server 8.0 on Windows 2003 Server Standard Edition R2, an error message pop up that states: MMC has detected an error in a snap-in. It is recommended that you shut down and restart MMC. After this message pops up, Filemaker Server freezes. I'm also having problems with openssl and running executable files, but am not sure if the 2 are related. Error message for openssl states: Openssl.exe encountered a problem and needed to close. In one of the computers connected to the network running this same Server 2003 R2, when I tried double-clicking on Dr. Web antivirus to do a scan, nothing happens. I have done this many times before reinstalling the server, and it never gave trouble before this. Any help given is appreciated.

    Read the article

  • Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

    - by den-javamaniac
    I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

    Read the article

  • Is it possible to hide the SSID of the Windows 7 soft AP

    - by Goro
    I know it is possible to create a sofware AP in windows 7 using command prompt: netsh wlan set hostednetwork ... But is it possible to set such a network not to broadcast its SSID? I realize that this does not gain any security - or may even make the system more secure, but I am not asking about security here. I want to know if it is possible, through the netsh command interface, to hide the SSID. If my client wants to hide the SSID, then I will make them aware of security implications, but in the end it is their decision.

    Read the article

  • Do TCP connections work differently within the same subnet?

    - by Dean
    I've encountered some network behaviour that confuses me while trying to get Java RMI working. I use netcat to connect to a local machine: [my_machine]$ nc -w 1 192.168.0.100 60000 && echo success success I try to do the same to my server: [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success This doesn't work, unless I explicitly listen on the server socket: [amazon_ec2]$ nc -l 60000 [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success success For the version that fails, the SYN packet receives a RST, ACK in response. I'm not too knowledgable about this stuff, at this point I only have wild theories such as the one in the question. Any ideas? Potentially useful details: Local Machine (192.168.0.100) - Macbook Remote Machine (Amazon EC2) - Amazon Linux AMI 2012.03 Security Group Settings: 22 (SSH) 0.0.0.0/0 1099 0.0.0.0/0 49152-65535 0.0.0.0/0 "iptables -L" shows no rules set

    Read the article

  • Putty freezes at random when logging into a remote machine in another continent

    - by artknish
    I have to ssh to a remote machine in Europe from Asia every day for my work. But Putty freezes sometimes at totally random times and I have no choice but to close and re-open a new ssh session. It's frustrating especially when I'm editing something or executing a long running program. I know the question really doesn't have much details ('cause nothing seems to be wrong with the network at all). Has anyone experienced this sort of issue with Putty and had resolved it? Thanks for your time!

    Read the article

  • Binding services to localhost and using SSH tunnels - can requests be forged?

    - by Martin
    Given a typical webserver, with Apache2, common PHP scripts and a DNS server, would it be sufficient from a security perspective to bind administration interfaces like phpmyadmin to localhost and access it via SSH tunnels? Or could somebody, who knew eg. that phpmyadmin (or any other commonly availible script) is listening at a certain port on localhost easily forge requests that would be executed if no other authentication was present? In other words: could somebody from somewhere in the internet easily forge a request, so that the webserver would accept it, thinking it originated from 127.0.0.1 if the server is listening on 127.0.0.1 only? If there were a risk, could it be somehow dealt with on a lower level than the application, eg. by using iptables? The idea being, that if someone found a weakness in a php script or apache, the network would still block this request because it did not arrive via a SSH-tunnel?

    Read the article

  • Standalone server setup for compute capacity

    - by mikera
    I'm developing an application for my company that will require a lot of compute capacity (running some very big mathematical calculations), and looking for some form of server setup to do this. For various reasons, we want to run this on-site in our office rather than hosting it externally. It's been a while since I last had to set up my own servers so I thought I would tap into the collective wisdom of serverfault! My broad requirements are: Budget $30-50k, with an aim to get as much compute capacity as possible for that budget 64-bit servers suitable to run Ubuntu Linux + Java Some relatively standalone rack that can be installed in secure office space Fast/low latency network connections between the servers, but don't really care about connectivity to the outside world Storage capacity shared between the servers - they don't necessarily need their own storage providing they can be booted from a common image Downtime can be tolerated (since the calculations are run in batch mode) The software itself is fault-tolerant, so there is no need for extra resiliency in the server setup (cheap replaceable commodity parts will be fine in general) Given these requirements what kind of setup would you recommend and why?

    Read the article

  • Oracle Partner Days and Oracle Days are coming to an EMEA city near you!

    - by Javier Puerta
    Oracle Partner Days A new round of Oracle Partner Days is coming to a large number of European cities. These events are exclusive for Oracle partners and will deliver to you real Business return on your OPN membership.You will hear the business opportunities coming from the adoption of the entire Oracle stack, the latest products value propositions and related sales strategy and be able to connect directly with Oracle executives and find new business opportunities with other partners in your region.The EMEA Oracle Partner Days are Local/Regional live events targeting the key contacts in sales and consultancy delivering Oracle strategy, engaging around the several perspectives of the Oracle portfolio, executive keynotes and deep dive Business content-related breakout sessions. The first city will be Frankfurt, on Oct. 29. Check the full list to find an Oracle Partner Day in a city near you. Oracle Days Oracle Days will be hosted after Oracle OpenWorld across EMEA, along October and November. By attending an Oracle Day, customers and partners can: Learn about how to leverage the power of the Oracle stack, by hearing customer case studies about successful business transformation, and by following cross-stack solution tracks within the agenda Discuss key issues for business and IT executives in cloud, big data, social, and mobile solutions, and network with peers who are facing the same challenges Meet Oracle experts and watch live demos of new products Get the latest news from Oracle OpenWorld. See full calendar and cities here

    Read the article

  • Sharing internet connection with WDS

    - by cornjuliox
    Is it possible to share an internet connection through WDS? I'm on the very edge of a wireless network, the spot that I'm in maintains a stable 22% according to XP with the help of a parabolic reflector crafted from a cheap pie tin. I was thinking I could grab another wireless router, use WDS to bridge the this router with the other one and share the 'net connection through it thus giving me a little bit more freedom but when I tried it it didn't work. WDS looks like it bridged the networks just fine, but I couldn't access anything on the internet. Do I need to do anything special or is this just not possible?

    Read the article

< Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >