Search Results

Search found 17336 results on 694 pages for 'richard long'.

Page 600/694 | < Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >

• Starting over and new to Ubuntu

  - by 2funnyyone

  We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

  Read the article

• Why are you doing this? [closed]

  - by NIcholas Lawson

  I am working on a story that I am going to be querying to several magazines in my hometown about this work that is being done by the AXR group. This is a group of people who have networked online and are working on developing a higher level syntax structure than CSS and HTML currently offer. I am covering this is as a story because I see potential in this as a human interest story in cosmopolitan society. I have been asked by the group to pose this question to you and would appreciate any and all comments you would have on the following ... To AXR: So when does the internet become finished? At what point does a computer scientist say to himself ... my job here is finished ... the internet is complete? When is the internet ready to be more about the display of content than the uploading of new websites or computer tech? You are embarking on upon a sixty year project every day you work with this internet, what drives you? Why are you spending your hard earned hours working on the code to this computer? I spend thirty hours a week online because I love the writing and I know what would make the internet better ... ease of use ... i know it is difficult to program but I see some very elegant solutions online ... in this early inception phase of your programming development for this HSS prototype ... I would like to know why I do not see you programmers asking questions such as ... What would make the end user's life the easiest when using this code? I know you can solve the problem but an evolution forward would be simple, not simple to a computer scientist but simple to use for a career janitor ... if you could solve the problem of alleviating the stress at using a the computer you could get better content out of the computer ... right now the main problem is that the best content is in the hands of the people least likely to use the computer and the more simple you make the computer to use ... the better the content collection will be in the long run ... That is not what I want to talk about though ... why are you writing code when you could be writing stories? I know the computer is worthless without content so I build content, I know the book is worthless without the combinations of words in them, i know the television is worthless without the television news anchor or the actor, what I want to know from you folks in a very journalistic sense is why are you even bothering to bother to write code for a machine that has only made our lives i would dare say less interesting. why are you feeding the beast your time when you could be writing stories or being an actor or musician or auto mechanic ... why code? why this machine? what do you love about it? what do you hate about it? what do you wonder about it? I want to know so that starting out I know how to further shape my questions with axr ... i want the full story ... i want the real answers ... and i want to know why you are doing this, it would make for great writing if you could elucidate on this point.

  Read the article

• Java EE 7 Roadmap

  - by Linda DeMichiel

  The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

  Read the article

• Personal Financial Management – The need for resuscitation

  - by Salil Ravindran

  Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

  Read the article

• PASS summit 2013. We do not remember days. We remember moments.

  - by Maria Zakourdaev

    "Business or pleasure?" barked the security officer in the Charlotte International Airport. "I’m not sure, sir," I whimpered, immediately losing all courage. "I'm here for the database technologies summit called PASS”. "Sounds boring. Definitely a business trip." Boring?! He couldn’t have been more wrong. If he only knew about the countless meetings throughout the year where I waved my hands at my great boss and explained again and again how fantastic this summit is and how much I learned last year. One by one, the drops of water began eating away at the stone. He finally approved of my trip just to stop me from torturing him. Time moves as slow as a turtle when you are waiting for something. Time runs as fast as a cheetah when you are there. PASS has come...and passed. It’s been an amazing week. Enormous sqlenergy has filled the city, filled the convention center and the surrounding pubs and restaurants. There were awesome speakers, great content, and the chance to meet most inspiring database professionals from all over the world. Some sessions were unforgettable. Imagine a fully packed room with more than 500 people in awed silence, catching each and every one of Paul Randall's words. His tremendous energy and deep knowledge were truly thrilling. No words can describe Rob Farley's unique presentation style, captivating and engaging the audience. When the precious session minutes were over, I could tell that the many random puzzle pieces of information that his listeners knew had been suddenly combined into a clear, cohesive picture. I was amazed as always by Paul White's great sense of humor and his phenomenal ability to explain complicated concepts in a simple way. The keynote by the brilliant Dr. DeWitt from Microsoft in front of the full summit audience of 5000 deeply listening people was genuinely breathtaking. The entire conference throughout offered excellent speakers who inspired me to absorb the knowledge and use it when I got home. To my great surprise, I found that there are other people in this world who like replication as much I do. During the Birds of a Feather Luncheon, SQL Server MVP Ted Krueger was writing a script for replicating the food to other tables. I learned many things at PASS, and not all of them were about SQL. After three summits, this time I finally got the knack of networking. I actually went up and spoke to people, and believe me, that was not easy for an introvert. But this is what the summit is all about. Sqlpeople. They are the ones who make it such an exciting experience. I will be looking forward to the next year. Till then I have my notes and new ideas. How long was the summit? Thousands of unforgettable moments.

  Read the article

• Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

  - by nightcrawler

  Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

  Read the article

• std::vector::size with glDrawElements crashes?

  - by NoobScratcher

  ( win32 / OpenGL 3.3 / GLSL 330 ) I decided after a long time of trying to do a graphical user interface using just opengl graphics to go back to a gui toolkit and so in the process have had to port alot of my code to win32. But I have a problem with my glDrawElement function. my program compiles and runs fine until it gets to glDrawElements then crashes.. which is rather annoying right. so I was trying to figure out why and I found out its std::vector::size member not returning the correct amount of faces in the unsigned interger vector eg, "vector<unsigned int>faces; " so when I use cout << faces.size() << endl; I got 68 elements???? instead of 24 as you can see here in this .obj file: # Blender v2.61 (sub 0) OBJ File: '' # www.blender.org v 1.000000 -1.000000 -1.000000 v 1.000000 -1.000000 1.000000 v -1.000000 -1.000000 1.000000 v -1.000000 -1.000000 -1.000000 v 1.000000 1.000000 -0.999999 v 0.999999 1.000000 1.000001 v -1.000000 1.000000 1.000000 v -1.000000 1.000000 -1.000000 s off f 1 2 3 4 f 5 8 7 6 f 1 5 6 2 f 2 6 7 3 <--- 24 Faces not 68? f 3 7 8 4 f 5 1 4 8 I'm using a parser I created to get the faces/vertexes in my .obj file: char modelbuffer [20000]; int MAX_BUFF = 20000; unsigned int face[3]; FILE * pfile; pfile = fopen(szFileName, "rw"); while(fgets(modelbuffer, MAX_BUFF, pfile) != NULL) { if('v') { Point p; sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); cout << " p.x = " << p.x << " p.y = " << p.y << " p.z = " << p.x << endl; } if('f') { sscanf(modelbuffer, "f %d %d %d %d", &face[0], &face[1], &face[2], &face[3]); cout << "face[0] = " << face[0] << " face[1] = " << face[1] << " face[2] = " << face[2] << " face[3] = " << face[3] << "\n"; faces.push_back(face[0] - 1); faces.push_back(face[1] - 1); faces.push_back(face[2] - 1); faces.push_back(face[3] - 1); cout << face[0] - 1 << face[1] - 1 << face[2] - 1 << face[3] - 1 << endl; } } using this struct to store the x,y,z positions also this vector was used with Point: vector<Point>points; struct Point { float x, y, z; }; If someone could tell me why its not working and how to fix it that would be awesome I also provide a pastebin to the full source code if you want a closer look. http://pastebin.com/gznYLVw7

  Read the article

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• Nokia Lumia 920 Windows Phone 8 Announcement

  - by Tim Murphy

  Today Nokia and Microsoft had an event to officially introduce the Lumia 920.  Below is a rundown of some of the things I found interesting. As a person who likes photography there was a lot to drool over.  The main feature that caught my attention was PureView with its optical stabilization.  This alone should improve the majority of you pictures.  Add to that the SmartShoot Object remover that uses multiple images to remove unwanted people or objects that move through your picture and you never have to accept reality again. For the most part the lenses concept introduced in Windows Phone 8 just makes the usability of leveraging camera better.  Of course that is Microsoft’s selling point.  One lens that caught my attention was the Bing lens.  I have to say it is about time that we can take pictures and use them to search for answers using Bing. There were a couple of features shown that involved augmented reality.  One was similar to the yapf application that is already in the market which overlays restaurants and other destination over live camera views.  The other was using the navigation directions with a live view. Then you get down to some of the physical features of the Lumia 920.  The one that got the most stage time is that it has a great 2000mah battery which can be charged wirelessly.  They also pointed out the improved glare reduction of the 4.5 in. curved glass screen.  This hardware improvement is improved further with software that detects glare conditions and adjusts the display attributes to enhance viewing ease. Adding to the wireless cool factor of the Lumia 920 is the general NFC capabilities.  This was demonstrated with NFC docking stations as well as JBL speakers and headphones. There was one more hardware feature that I applauded.  The super sensitive touch screen did away with one of my pet peeves with capacitive touch screens.  You will never have to remove you gloves to operate your phone again.  The mittens that they did the demo with looked more like boxing gloves. I was disappointed with Joe Belfiore said that they were only going to show a couple of new features of the Windows Phone 8 and would hear more at future events.  One of the things he did show is the ability to customize which buttons you preferred as defaults in IE10.  For example you could have the folders button where the refresh button normally is.  He also showed that at long last you can natively take screenshots on your phone.  Hopefully he will be back quickly to give us the rest of the features. The most disappointing part of the event was that we never found out when they would be released or how much they would cost.  Let’s hope this comes soon.  Even with these couple of items still left on my wish list I can’t wait to get my hands on a Lumia 920.  del.icio.us Tags: Windows Phone,Windows Phone 8,Nokia,Lumia,Lumia 920,Microsoft

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• trying to setup wireless

  - by JohnMerlino

  I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

  Read the article

• AI to move custom-shaped spaceships (shape affecting movement behaviour)

  - by kaoD

  I'm designing a networked turn based 3D-6DOF space fleet combat strategy game which relies heavily on ship customization. Let me explain the game a bit, since you need to know a bit about it to set the question. What I aim for is the ability to create your own fleet of ships with custom shapes and attached modules (propellers, tractor beams...) which would give advantages and disadvantages to each ship, so you have lots of different fleet distributions. E.g., long ship with two propellers at the side would let the ship spin around that plane easily, bigger ships would move slowly unless you place lots of propellers at the back (therefore spending more "construction" points and energy when moving, and it will only move fast towards that direction.) I plan to balance all the game around this feature. The game would revolve around two phases: orders and combat phase. During the orders phase, you command the different ships. When all players finish the order phase, the combat phase begins and the ship orders get resolved in real-time for some time, then the action pauses and there's a new orders phase. The problem comes when I think about player input. To move a ship, you need to turn on or off different propellers if you want to steer, travel forward, brake, rotate in place... These propellers don't have to work at their whole power, so you can achieve more movement combinations with less propellers. I think this approach is a bit boring. The player doesn't want to fiddle with motors or anything, you just want to MOVE and KILL. The way I intend the player to give orders to these ships is by a destination and a rotation, and then the AI would calculate the correct propeller power to achive that movement and rotation. Propulsion doesn't have to be the same throught the entire turn calculation (after the orders have been given) so it would be cool if the ships reacted as they move, adjusting the power of the propellers for their needs dynamically, but it may be too hard to implement and it's not really needed for the game to work. In both cases, how would that AI decide which propellers to activate for the best (or at least not worst) trajectory to be achieved? I though about some approaches: Learning AI: The ship types would learn about their movement by trial and error, adjusting their behaviour with more uses, and finally becoming "smart". I don't want to get involved THAT far in AI coding, and I think it can be frustrating for the player (even if you can let it learn without playing.) Pre-calculated timestep movement: Upon ship creation, ALL possible movements are calculated for each propeller configuration and power for a given delta-time. Memory intensive, ugly, bad. Pre-calculated trajectories: The same as above but not for each delta-time but the whole trajectory, which would then be fitted as much as possible. Requires a fixed propeller configuration for the whole combat phase and is still memory intensive, ugly and bad. Continuous brute forcing: The AI continously checks ALL possible propeller configurations throughout the entire combat phase, precalculates a few time steps and decides which is the best one based on that. Con: what's good now might not be that good later, and it's too CPU intensive, ugly, and bad too. Single brute forcing: Same as above, but only brute forcing at the beginning of the simulation, so it needs constant propeller configuration throughout the entire combat phase. Coninuous angle check: This is not a full movement method, but maybe a way to discard "stupid" propeller configurations. Given the current propeller's normal vector and the final one, you can approximate the power needed for the propeller based on the angle. You must do this continuously throughout the whole combat phase. I figured this one out recently so I didn't put in too much thought. A priori, it has the "what's good now might not be that good later" drawback too, and it doesn't care about the other propellers which may act together to make a better propelling configuration. I'm really stuck here. Any ideas?

  Read the article

• Deliberate Practice

  - by Jeff Foster

  It’s easy to assume, as software engineers, that there is little need to “practice” writing code. After all, we write code all day long! Just by writing a little each day, we’re constantly learning and getting better, right? Unfortunately, that’s just not true. Of course, developers do improve with experience. Each time we encounter a problem we’re more likely to avoid it next time. If we’re in a team that deploys software early and often, we hone and improve the deployment process each time we practice it. However, not all practice makes perfect. To develop true expertise requires a particular type of practice, deliberate practice, the only goal of which is to make us better programmers. Everyday software development has other constraints and goals, not least the pressure to deliver. We rarely get the chance in the course of a “sprint” to experiment with potential solutions that are outside our current comfort zone. However, if we believe that software is a craft then it’s our duty to strive continuously to raise the standard of software development. This requires specific and sustained efforts to get better at something we currently can’t do well (from Harvard Business Review July/August 2007). One interesting way to introduce deliberate practice, in a sustainable way, is the code kata. The term kata derives from martial arts and refers to a set of movements practiced either solo or in pairs. One of the better-known examples is the Bowling Game kata by Bob Martin, the goal of which is simply to write some code to do the scoring for 10-pin bowling. It sounds too easy, right? What could we possibly learn from such a simple example? Trust me, though, that it’s not as simple as five minutes of typing and a solution. Of course, we can reach a solution in a short time, but the important thing about code katas is that we explore each technique fully and in a controlled way. We tackle the same problem multiple times, using different techniques and making different decisions, understanding the ramifications of each one, and exploring edge cases. The short feedback loop optimizes opportunities to learn. Another good example is Conway’s Game of Life. It’s a simple problem to solve, but try solving it in a functional style. If you’re used to mutability, solving the problem without mutating state will push you outside of your comfort zone. Similarly, if you try to solve it with the focus of “tell-don’t-ask“, how will the responsibilities of each object change? As software engineers, we don’t get enough opportunities to explore new ideas. In the middle of a development cycle, we can’t suddenly start experimenting on the team’s code base. Code katas offer an opportunity to explore new techniques in a safe environment. If you’re still skeptical, my challenge to you is simply to try it out. Convince a willing colleague to pair with you and work through a kata or two. It only takes an hour and I’m willing to bet you learn a few new things each time. The next step is to make it a sustainable team practice. Start with an hour every Friday afternoon (after all who wants to commit code to production just before they leave for the weekend?) for month and see how that works out. Finally, consider signing up for the Global Day of Code Retreat. It’s like a daylong code kata, it’s on December 8th and there’s probably an event in your area!

  Read the article

• Sitting Pretty

  - by Phil Factor

  Guest Editorial for Simple-Talk IT Pro newsletter'DBAs and SysAdmins generally prefer an expression of calmness under adversity. It is a subtle trick, and requires practice in front of a mirror to get it just right. Too much adversity and they think you're not coping; too much calmness and they think you're under-employed' I dislike the term 'avatar', when used to describe a portrait photograph. An avatar, in the sense of a picture, is merely the depiction of one's role-play alter-ego, often a ridiculous bronze-age deity. However, professional image is important. The choice and creation of online photos has an effect on the way your message is received and it is important to get that right. It is fine to use that photo of you after ten lagers on holiday in an Ibiza nightclub, but what works on Facebook looks hilarious on LinkedIn. My splendid photograph that I use online was done by a professional photographer at great expense and I've never had the slightest twinge of regret when I remember how much I paid for it. It is me, but a more pensive and dignified edition, oozing trust and wisdom. One gasps at the magical skill that a professional photographer can conjure up, without digital manipulation, to make the best of a derisory noggin (ed: slang for a head). Even if he had offered to depict me as a semi-naked, muscle-bound, sword-wielding hero, I'd have demurred. No, any professional person needs a carefully cultivated image that looks right. I'd never thought of using that profile shot, though I couldn't help noticing the photographer flinch slightly when he first caught sight of my face. There is a problem with using an avatar. The use of a single image doesn't express the appropriate emotion. At the moment, it is weird to see someone with a laughing portrait writing something solemn. A neutral cast to the face, somewhat like a passport photo, is probably the best compromise. Actually, the same is true of a working life in IT. One of the first skills I learned was not to laugh at managers, but, instead, to develop a facial expression that promoted a sense of keenness, energy and respect. Every profession has its own preferred facial cast. A neighbour of mine has the natural gift of a face that displays barely repressed grief. Though he is characteristically cheerful, he earns a remarkable income as a pallbearer. DBAs and SysAdmins generally prefer an expression of calmness under adversity. It is a subtle trick, and requires practice in front of a mirror to get it just right. Too much adversity and they think you're not coping; too much calmness and they think you're under-employed. With an appropriate avatar, you could do away with a lot of the need for 'smilies' to give clues as to the meaning of what you've written on forums and blogs. If you had a set of avatars, showing the full gamut of human emotions expressible in writing: Rage, fear, reproach, joy, ebullience, apprehension, exasperation, dissembly, irony, pathos, euphoria, remorse and so on. It would be quite a drop-down list on forums, but given the vast prairies of space on the average hard drive, who cares? It would cut down on the number of spats in Forums just as long as one picks the right avatar. As an unreconstructed geek, I find it hard to admit to the value of image in the workplace, but it is true. Just as we use professionals to tidy up and order our CVs and job applications, we should employ experts to enhance our professional image. After all you don't perform surgery or dentistry on yourself do you?

  Read the article

• Comparing Apples and Pairs

  - by Tony Davis

  A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

  Read the article

• Need help with chronic slow wifi connections

  - by mgeorge

  I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

  Read the article

• Build 2012, the first post

  - by Dennis Vroegop

  Yes, I was one of the lucky few who made it to Build. Build, formerly known as the Professional Developers Conference (or PDC) is the place to be if you are a developer on the Microsoft platform. Since I take my job seriously I took out some time on my busy schedule, sighed at the thought of not seeing my family for another week and signed up for it. Now, before I talk about the amazing Surface devices (yes, this posting is written on one of them), the great Lumia 920 we all got, the long deserved love for touch, NUI and other things I have been talking about for years, I need to do some ranting. So if you are anxious to read about the technical goodies you’ll have to wait until the next post. Still here? Good. When I signed up for the Build conference during my holidays this summer it was pretty obvious that demand would be high. Therefor I made sure I was on time. But even though I registered only 7 minutes after the initial opening time the Early Bird discount for the first 500 attendees was already sold out. I later learned that registration actually started 5 minutes before the scheduled time but even though it is still impressive how fast things went. The whole event sold out in 57 minutes Or so they say… A lot of people got put on the waiting list. There was room for about 1500 attendees and I heard that at least 1000 people were on that waiting list, including a lot of people I know. Strangely, all of them got tickets assigned after 2 weeks. Here at the conference I heard from a guy from Nokia that they had shipped 2500 Lumia 920 phones. That number matches the rumors that the organization added 1000 extra tickets. This, of course is no problem. I am not an elitist and I think large crowds have a special atmosphere that I quite like. But…. The Microsoft Campus is not equipped for that sheer volume of visitors. That was painfully obvious during on-site registration where people had to stand in line for over 2 hours. The conference is spread out over 2 buildings, divided by a 15 minute busride (yes, the campus is that big). I have seen queues of over 200 people waiting for the bus and when that arrived it had a capacity of 16. I can assure you: that doesn’t fit. This of course means that travelling from one site to the other might take about 30 minutes. So you arrive at the session room just in time, only to find out it’s full. Since you can’ get into that session you try to find another one but now you’re even more late so you have no chance at all of entering. The doors are closed and you’re told: “Well, you can watch the live stream online”. Mmmm… So I spend thousands of dollars, a week away from home, family and work to be told I can also watch the sessions online? Are you fricking kidding me? I could go on but I won’t. You get the idea. It’s jus badly organized, something I am not really used to in my 20 years of experience at Microsoft events. Yes, I am disappointed. I hope a lot of people here in Redmond will also fill in the evals and that the organization next year will do a better job. Really, Build deserves better. </rantmode>

  Read the article

• PowerShell and SMO – be careful how you iterate

  - by Fatherjack

  I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

  Read the article

• Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

  - by Lunchbox

  Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

  Read the article

• It’s official – Red Gate is a great place to work!

  - by red@work

  At a glittering award ceremony last week, we found out that we’re officially the 14th best small company to work for in the whole of the UK! This is no mean feat, considering that about 1,000 companies enter the Sunday Times Top 100 best companies awards each year. Most of these are in the small companies category too. It's the fourth year in a row for us to be in the Top 100 list and we're tickled pink because the results are based on employee opinion. We’re particularly proud to be the best small company in Cambridge (in the whole of East Anglia, in fact) and the best small software development company in the entire UK. So how does it all work? Well, 90% of us took the time to answer over 70 questions on categories such as management, benefits, wellbeing, leadership, giving something back and what we think of Red Gate as a whole. It makes you think about every part of day to day working life and how you feel about it. Do you slightly or strongly agree or disagree that your manager motivates your to do your best every day, or that you have confidence in Red Gate's leaders, or that you’re not spending too much time working? It's great to see that we had one of the best scores in the country for the question "Do you think your company takes advantage of you?" We got particularly high scores for management, wellbeing and for giving something back too. A few of us got dressed up and headed to London for the awards; very excited about where we’d place but slightly nervous about having to get up on stage. There was a last minute hic up with a bow tie but the Managing Editor of the Sunday Times kindly stepped in to offer his assistance just before we had our official photo taken. We were nominated for two Special Recognition Awards. Despite not bringing them home this year, we're very proud to be nominated as there are only three nominations in each category. First we were up for the Training and Development award. Best Companies loved that we get together at lunchtimes to teach each other photography, cookery and French, as well as our book clubs and techie talks. And of course they liked our opportunities to go on training courses and to jet off to international conferences. Our other nomination was for the Wellbeing award. Best Companies loved our free food (and let’s face it, so do we). Porridge or bacon sandwiches for breakfast, a three course hot dinner, and free fruit and cereals all day long. If all that has an affect on the waistline then there are plenty of sporty activities for us all to get involved in, such as yoga, running or squash. Or if that’s not your thing then a relaxing massage helps us all to unwind every few months or so. The awards were hosted by news presenter Kate Silverton. She gave us a special mention during the ceremony for having great customer engagement as well as employee engagement, after we told her about Rodney Landrum (a Friend of Red Gate) tattooing our logo on his arm. We showed off our customised dinner jacket (thanks to Dom from Usability) with a flashing Red Gate logo on the back and she seemed suitability impressed. Back in the office the next day, we popped open the champagne and raised a glass to our success. Neil, our joint CEO, talked about how pleased he was with the award because it's based on the opinions of the people that count – us. You can read more about the Sunday Times awards here. By the way, we're still growing and are still hiring. If you’d like to keep up with our latest vacancies then why not follow us on Twitter at twitter.com/redgatecareers. Right now we're busy hiring in development, test, sales, product management, web development, and project management. Here's a link to our current job opportunities page – we'd love to hear from great people who are looking for a great place to work! After all, we're only great because of the people who work here. Post by: Alice Chapman

  Read the article

• How to fix: Ubuntu 12.04 reboots after loading with elilo

  - by Casey

  I have an HP p6-2120 with CPU: AMD A6-3620 APU with Radeon Graphics RAM: 6GB BIOS: HO2_710.ROM v7.10 [AMI v7.10 4/19/2012] Disk: SATA1 (/dev/sda) - 1 TB (windows) Disk: SATA2 (/dev/sdb) - 1 TB partitioned using "parted -a optimal /dev/sdb" as follows: .. 1049KB 201MB FAT32 boot flag set .. 201MB 60GB ext2 (/) .. 68GB 78GB linux-swap(v1) (swap) .. 78GB 790GB ext4 (/home) .. - rest is "free" space reserved for other purposes (eventually) ubuntu: 12.04.1 LTS [specifically: Release 12.04 (precise) 64-bit] kernel: linux 3.2.0-29-generic I created a bootable EFI USB from the ISO (64-bit) which I downloaded. I can run and install from the USB without any problems. The BIOS is an EFI bios that appears to be capable of booting in either EFI or Legacy mode. Initially, I did the "standard" install with NOTHING on disk2, and let the installer configure everything. The net result of this was that when I started the computer and forced it into "boot" menu mode, it DOES NOT recognize SATA2 as an EFI drive, and when I attempt to "legacy" boot from it, I get the message "ERROR: No Boot Disk has been detected." The "standard" install created one large partition that consumed the entire disk. At that point, I manually partitioned the disk (using sudo parted -a optimal /dev/sdb) as described above. I selected the "other" install, and changed the /dev/sdb1 to "bios_grub", /dev/sdb2 as "/" (ext4), /dev/sdb3 as swap, and /dev/sdb4 as "/home". [Note: fearing that possibly elilo did not recognize ext4, I switched /dev/sdb2 to ext2 and re-insalled] The net result was that the install appeared to trash the /dev/sdb1 partition so that it was NOT readable by anything. I re-formated /dev/sdb1 as FAT32 and set the boot flag. I repeated the install ignoring the messages about no bios_grub partition. After several attempts to get GRUB2 to work, I switched to elilo. I downloaded the most recent version and copied it (elilo-3.14-ia64.efi) to /dev/sdb1/efi/boot/bootx64.efi. (The BIOS boot loader did not recognize it either as elilo-3.14.ia64.efi or as elilo.efi. Based on the advice in one of the web-pages I found, I renamed it to bootx64.efi. This worked.) In that same directory (/efi/boot), I copied the file pointed to the link in /dev/sdb2/vmlinuz to /efi/boot/vmlinuz, and the file pointed to the link in /dev/sdb2/initrd.img to /efi/boot/initrd.img. I created an elilo.conf file as follows: timeout=5000 prompt default=linux-boot image=vmlinuz label=linux-boot read-only initrd=initrd.img root=/dev/sdb2 The /efi/boot directory contains 4 files: bootx64.efi elilo.conf vmlinuz initrd.img When I power-cycle the computer and force the boot menu, drive2 shows up as an EFI bootable drive. When I select it, I get the elilo prompt. Pressing , it appears to load the kernal (I have tried it with verbose=5, and there is a long string of messages with the final one a command line to load the kernel and a series of several dots that fly by) then the screen goes blank, and it reboots the computer. [Note: I have also tried substituting the UUID as found in the /etc/fstab of the installed system for the root directory. This had no effect.] This is a brief synopsis of several nights of fiddling with this. I would deeply appreciate any help you can give.

  Read the article

• Minimum team development sizes

  - by MarkPearl

  Disclaimer - these are observations that I have had, I am not sure if this follows the philosophy of scrum, agile or whatever, but most of these insights were gained while implementing a scrum scenario. Two is a partnership, three starts a team For a while I thought that a team was anything more than one and that scrum could be effective methodology with even two people. I have recently adjusted my thinking to a scrum team being a minimum of three, so what happened to two and what do you call it? For me I consider a group of two people working together a partnership - there is value in having a partnership, but some of the dynamics and value that you get from having a team is lost with a partnership. Avoidance of a one on one confrontation The first dynamic I see missing in a partnership is the team motivation to do better and how this is delivered to individuals that are not performing. Take two highly motivated individuals and put them together and you will typically see them continue to perform. Now take a situation where you have two individuals, one performing and one not and the behaviour is totally different compared to a team of three or more individuals. With two people, if one feels the other is not performing it becomes a one on one confrontation. Most people avoid confrontations and so nothing changes. Compare this to a situation where you have three people in a team, 2 performing and 1 not the dynamic is totally different, it is no longer a personal one on one confrontation but a team concern and people seem more willing to encourage the individual not performing and express their dissatisfaction as a team if they do not improve. Avoiding the effects of Tuckman’s Group Development Theory If you are not familiar with Tuckman’s group development theory give it a read (http://en.wikipedia.org/wiki/Tuckman's_stages_of_group_development) In a nutshell with Tuckman’s theory teams go through these stages of Forming, Storming, Norming & Performing. You want your team to reach and remain in the Performing stage for as long as possible - this is where you get the most value. When you have a partnership of two and you change the individuals in the partnership you basically do a hard reset on the partnership and go back to the beginning of Tuckman’s model each time. This has a major effect on the performance of a team and what they can deliver. What I have seen is that you reduce the effects of Tuckman's theory the more individuals you have in the team (until you hit the maximum team size in which other problems kick in). While you will still experience Tuckman's theory with a team of three, the impact will be greatly reduced compared to two where it is guaranteed every time a change occurs. It's not just in the numbers, it's in the people One final comment - while the actual numbers of a team do play a role, the individuals in the team are even more important - ideally you want to keep individuals working together for an extended period. That doesn't mean that you never change the individuals in a team, or that once someone joins a team they are stuck there - there is value in an individual moving from team to team and getting cross pollination, but the period of time that an individual moves should be in month's or years, not days or weeks. Why? So why is it important to know this? Why is it important to know how a team works and what motivates them? I have been asking myself this question for a while and where I am at right now is this… the aim is to achieve the stage where the sum of the total (team) is greater than the sum of the parts (team members). This is why we form teams and why understanding how they work is a challenge and also extremely stimulating.

  Read the article

• News From EAP Testing

  - by Fatherjack

  There is a phrase that goes something like “Watch the pennies and the pounds/dollars will take care of themselves”, meaning that if you pay attention to the small things then the larger things are going to fare well too. I am lucky enough to be a Friend of Red Gate and once in a while I get told about new features in their tools and have a test copy of the software to trial. I got one of those emails a week or so ago and I have been exploring the SQL Prompt 6 EAP since then. One really useful feature of long standing in SQL Prompt is the idea of a code snippet that is automatically pasted into the SSMS editor when you type a few key letters. For example I can type “ssf” and then press the tab key and the text is expanded to SELECT * FROM. There are lots of these combinations and it is possible to create your own really easily. To create your own you use the Snippet Manager interface to define the shortcut letters and the code that you want to have put in their place. Let’s look at an example. Say I am writing a blog about something and want to have the demo code create a temporary table. It might looks like this; The first time you run the code everything is fine, a lovely set of dates fill the results grid but run it a second time and this happens.   Yep, we didn’t destroy the temporary table so the CREATE statement fails when it finds the table already exists. No matter, I have a snippet created that takes care of this.   Nothing too technical here but you will see that in the Code section there is $CURSOR$, this isn’t a TSQL keyword but a marker for SQL Prompt to place the cursor in that position when the Code is pasted into the SSMS Editor. I just place my cursor above the CREATE statement and type “ifobj” – the shortcut for my code to DROP the temporary table – which has been defined in the Snippet Manager as below. This means I am right-away ready to type the name of the offending table. Pretty neat and it’s been very useful in saving me lots of time over many years.   The news for SQL Prompt 6 is that Red Gate have added a new Snippet Command of $PASTE$. Let’s alter our snippet to the following and try it out   Once again, we will type type “ifobj” in the SSMS Editor but first of all, highlight the name of the table #TestTable and copy it to your clipboard. Now type “ifobj” and press Tab… Wherever the string $PASTE$ is placed in the snippet, the contents of your clipboard are merged into the pasted TSQL. This means I don’t need to type the table name into the code snippet, it’s already there and I am seeing a fully functioning piece of TSQL ready to run. This means it is it even easier to write TSQL quickly and consistently. Attention to detail like this from Red Gate means that their developer tools stay on track to keep winning awards year after year and help take the hard work out of writing neat, accurate TSQL. If you want to try out SQL Prompt all the details are at http://www.red-gate.com/products/sql-development/sql-prompt/.

  Read the article

• It happens only at Devoxx ...

  - by arungupta

  After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

< Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >