Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 601/1106 | < Previous Page | 597 598 599 600 601 602 603 604 605 606 607 608  | Next Page >

• Recovery from hell - undeleting partition overwritten by Xubuntu 12.10 installer?

  - by DaimyoKirby

  This is turning into a nightmare - following my initial recovery of my two partitions, I went to install Xubuntu 12.10 (again). At this time I had two partitions - one of ~39 GB had Zorin OS 6 installed on it, and another of ~33 GB had nothing installed, just a few files in it that I had manually backed up (moved) there. When I got to the partitioning step, I chose "Replace Zorin OS 6 with Xubuntu 12.10", along with LVM, naturally thinking that the installer wouldn't touch the second partition, since Zorin wasn't installed on it. I was dead wrong. Upon booting my newly installed Xubuntu 12.10, I found in gparted that there were only two partitions - ~255MB, which appears to have the boot stuff in it (it's flagged boot in gparted), and another of ~74 GB. Question: Is there any way to salvage my old files on the non-Zorin ext3 partition? I'm really upset I made such a dumb move (again...), and any and all help is appreciated very, very much!

  Read the article

• unable remove/reinstall libxss1:amd

  - by mono

  Whenever I try to install anything (software-center or apt-get) I get an error report stating that libxss1:amd is in a "very bad inconsistent state" (translated from german) and that I should reinstall it. That would not bother me much but I am never sure if the stuff I'm trying will be working in the end. It really resists from being repaired apt-get install, apt-get remove, apt-get -f install, and all the usual suspects - nothing works. It always comes to: dpkg: Fehler beim Bearbeiten von libxss1:amd64 (--configure): Paket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten es nochmal installieren, bevor Sie die Konfiguration versuchen. Fehler traten auf beim Bearbeiten von: libxss1:amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) I posted the error as is, since my translation might not be exact. But I guess you can figure from my text. I found out that this file is the X screen saver. Maybe I should kill it before handling that file. If thats so, than please tell me how. Thanks for your help, thomas

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• How to get numpad out of "mouse emulation" mode?

  - by Jonik

  My numeric keypad has somehow got into a "mouse emulation" mode where the number keys just move the mouse pointer around (2 = down; 8 = up, 6 = right, etc). Anyone know how to make it work normally again? None of the other numpad keys work either (I first noticed the whole thing when Ctrl + ÷ (numpad division sign) no longer produced "line comment" in IntelliJ IDEA). Toggling num lock doesn't affect this (though the indicator LED works as usual). I'm using GNOME on Lucid Lynx (10.4).

  Read the article

• Dual monitor not working completely in 12.10 after upgrade

  - by Mark Baldridge

  At 12.04, dual monitors worked perfectly. After upgrading to 12.10, the primary monitor works, the second monitor only partly works. I am sure there is some difference between the releases that I have missed setting properly. System settings - Displays show both correctly as Acer 22" monitors at 1680x1050 (16:10). An icon on monitor 2 is present, but elongated; almost an artifact, since other icons on the primary screen are absent, but this one icon is there on th second monitor. Selecting the icons on both screens exist. Painting is weird on monitor 2. Launcher exists and works on both screens, but even with sticky edges off, the cursor stops at the left edge of monitor 2. Clicking on text editor on screen 2 launcer will launch gedit there. If I drag it, it leaves a trail of after images like repaint is failing. If I drive the cursor on the launcher, the help tags like "LibreOffice Writer" appear, but stay on screen unless I drag the active gedit window over them. Then part of the help bubbles are overwritten, leaving behind after images of the gedit window on screen. What is really fascinating is that the System settings - Displays is now ignoring monitor selection, after allowing it earlier. Just before this, the help popup which said "Select a monitor to change its properties; drag to rearrange its placement" actually let me do that. Maybe a trick of where I grab the edge of the monitor in the Displays setting. I just found a working handle. When I drag monitor 1 to the right of monitor 2, "Apply" and confirm, both monitors work normally (although the right monitor lets the cursor slide off the right edge onto the left edge of monitor 1 - which sounds correct). Painting of windows does not leave an after image. However, success is only temporary. The setting survives the reboot, but painting on the left monitor, now monitor 2, now replicates the issues from before. The after image of the gedit window and the small window for "Are you sure you want to close all programs and restart the computer?" are still on monitor 2 (on the left now), even though they are not real windows, nor do they have processes behind them. Curiously, in Displays, the "green" monitor on the left in the display window is matched by the right monitor color in the monitor upper left corner. Probably makes sense as the one on the right is now monitor 1. If I repeat the "drag the left monitor to the right of the right monitor on the "Displays" window, things are oriented properly, with no display artifacts as I drag windows around either screen. Also the description bubbles that pop up are overwritten on both screens, so none of those artifacts either. This goodness does not survive a reboot, however. Have not tried logging out and back in. All of this after positing that the motherboard VGA and HDMI ports could have been the issue. So, I installed an e-GeForce 7600 GT Dual DVI (I know the web thinks it is not DVI, but VGA, but the connectors are DVI). No change to the weird behavior. The good parts continue to work, the weirdness also works, and swapping monitor positions seems to cure the issue. So, is there a setting I have missed? Given "swapping" monitor 1 and 2 on the System Settings... - Displays makes it work, just not across boot, I suspect so.

  Read the article

• How do I scan my windows partition for viruses from Ubuntu?

  - by Alvar

  I think I might have a virus on my windows partition and I want to scan it Ubuntu. Is this possible? I would like a program that is free. clamAV I tried clamAV but I couldn't find a setting for scaning my other partition that I have windows on, it scaned my Ubuntu disk and that was fine. Antivirus Within Windows I can't use my Windows partition since the virus make my laptop freeze every time I log in. And I don't want it to spread or make more damage than it might have done already.

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

• Mounting Samba share whenever it's available, unmounting when it's not

  - by Laurynas Biveinis

  I am trying setup permanent samba share mounts. That's not too hard using these instructions. But, I want them to Automatically remount whenever I join the network where these shares are available. Automatically unmount (or make access requests fail immediately instead of hanging) whenever I leave the network, i.e. avoid this automatically. Googling suggests that AutoFS might be helpful. I gather it takes care of the 1. above but I am not sure about the 2. The other questions about automated Samba mounts, i.e. How to mount a samba share permanently?, do not seem to address automatic remounts/unmounts, so I think this is not a duplicate. Thanks.

  Read the article

• Why is the US international keyboard layout on Ubuntu different?

  - by pablo

  I have been using Linux on and off for 10 years, and more recently I have spent more time with OSX. But, I still remember that in the beginning I'd choose the US international keyboard layout and it would have exactly the same output as the Windows keyboard layout (and most recently, the OSX US international layout). However, a few years ago when I installed Ubuntu, I noticed that the cedilla wasn't printed anymore (ç or Ç). This is a combination of the following keys: ' + c. Instead, what I get is the c letter. When did it start to happen, and why the difference to the behavior on the other OSes? What puzzles me even more is that there is even an "US International alternative" keyboard layout, which prints exactly the same keys! So, what's it alternative to? This has been reported as a bug back to Canonical (can't find the link now), but the keyboard layout has never changed back to what I'd expect. I know the workarounds to fix it to what I need, but I just would like to know why/when it has become different.

  Read the article

• How to find out the installation path to my browser?

  - by rumtscho

  I am installing a proprietary CAD application (MEDUSA4 personal) and the installer wants to know the path to my web browser (as a prerequisite for online help). I have the default firefox installation and chromium, but I don't know the installation path for any of them, and couldn't find them among the usual suspects (/usr/bin, /usr/lib). It would be nice if you could tell me the path to one of them, and even nicer if you can tell me how to find out the installation path to any package managed by apt.

  Read the article

• Xorg constant high cpu usage

  - by user157342

  CPU AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ Kernel 2.6.38-7.dmz.1-liquorix-amd64 X server version: X.Org X Server 1.9.0 OpenGL direct rendering: Yes OpenGL vendor: NVIDIA Corporation OpenGL renderer: GeForce 8400 GS/PCI/SSE2 OpenGL version: 3.3.0 NVIDIA 270.41.06 GCC version: 4.4.5 Java version: 1.6.0_20 Python version: 2.6.6 GTK version: 2.22.0 PyGTK version: 2.21.0 Firefox version: Mozilla Firefox 5.0 Ubuntu version: 10.10 GNOME version: 2.32.0 The issue is, the Xorg process always seems to be active with over 6% CPU and +50MB RAM usage, which in turn keeps the fans blowing all the time.

  Read the article

• When Ubuntu Server restarts eth0 Doesn't come back up

  - by JoelGsus

  Every time I restart my Ubuntu Server 11.10 I can't ssh into it because ETH0 doesn't come up automatically. I never had this problem before upgrading to 11.10. I have to login to the server and start the ETH0 manually. I would appreciate it any help. Thanks. Here is my /etc/networks/interfaces file: #The loopback network interface auto lo eth0 iface lo inet loopback # The primary network interface iface eth0 inet static address 192.168.1.102 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 gateway 192.168.1.1

  Read the article

• Gnome 3 and compiz, everything works except Explode and Leaf Spread animations

  - by Erik

  I am using 11.10 with Gnome 3, I have installed Compiz, and have got it functioning almost how I want it. I want my windows to Leaf Spread, which seems to work fine for a few minutes after I enable it and restart my machine. However, over the time of a few window closes, I notice that the objects are not showing up little by little until the Leaf Spread just doesn't show at all? This really isn't a big deal, but I'd like things to work properly. Can anyone shed some light on this?

  Read the article

• How to fix Bluetooth Sound in Ubuntu 11.10

  - by Cerin

  Bluetooth sound worked perfectly for me in Ubuntu 10.04. I recently upgraded to 11.10, and although sound in general works fine, Bluetooth sound almost never works. My headset is paired, and Sound Settings shows it's selected as the output device, but no sound is being output. I've tested the headset with other devices, and confirmed it still works, so the issue is definitely with 11.10. I'm not seeing any explicit errors and I can't find any similar issues with 11.10 through Google. I tried restarting the bluetooth service, but that had no effect. What can I do to fix this?

  Read the article

• Can't start ubuntu 11.10, Stops at login screen!

  - by Martinpizza

  I have been trying to dual boot ubuntu with windows 7 via WUBI on my custom built pc but without success. When i start the computer i can choose windows or ubuntu i choose ubuntu and when i should get to the login screen the screen just stays purple/pink. Tried safe mode but cant get in there either. I have tried reinstall but did not work either. :( The second time i install ubuntu the screen was purple/pink and the screen was cut of so the left side was on the right side and right side on left side (hard to describe) Third time installing (The last time) it is just like the first time please help!!!! cant get nowhere without help i am kinda new at ubuntu and its creepy commands. Had ubuntu on my old computer. I think the problem is my hardware so here is my computer specs: Amd Fx 6100 Amd HIS Radeon HD 6950 ICEQ X Asus Sabertooth 990fx 1TB Harddrive I have no idea the name on it Please Help me!! Sorry for my bad English! :D

  Read the article

• How to install (or mock) Internet Explorer?

  - by Ivan

  I need to install a Windows application, which checks if there is Internet Explorer of at least 5th version installed and refuses to install (while I believe it does not really need it to work) if it is not. I've tried winetricks to install ie 8, 7, 6 full, 6 versions it offers - none worked - versions 7 and 8 installers report a function missing in msvcr (installing all msvcr versions didn't help), ie6 report some other error (I'll specify if it matters). I've also tried IEs4Linux - it also fails, complaining for a "BadIDChoice" X Window System error received by ies4linux-gtk.py. Is there a way to install any IE version in Ubuntu 10.10 with Wine or to mock its presence? I don't even need it to work, just to be installed in the Wine system so that other Windows programs could see it's there. I use Ubuntu 10.10 with Wine 1.3.8.

  Read the article

• MacBookPro 7,1 can only see one cpu

  - by gozzilli

  On a MacBookPro 7,1 running ubuntu 11.10, System monitor only sees 1 core (instead of 2). cat /proc/cpuinfo | grep 'cpu cores' also gives: cpu cores : 1 I followed this guide and added acpi_apic_instance=2 to the line with GRUB_CMDLINE_LINUX_DEFAULT, but that doesn't seem to change the situation. What can I do? I'm using rEFIt, installed under MacOS, and running in dual boot with MacOS. After the rEFIT menu, I'm still presented with the GRUB menu (I'm assuming that's normal). I saw similar posts on this matter, but could not fix my problem with what they suggested. EDIT: With the method mentioned above the computer runs sometimes with 1 core and other times with 2. Why is that? How can it be fixed?

  Read the article

• My Folders Become Hidden System Files And Access Denied?

  - by echolab

  I just aske a question in Superuser site , i have an external hdd which suddenly seems infected and one of my folders which contain my photos changed to something like this One of superuser guys suggest that i install an ubuntu and try to scan and change permissions , but i am not an ubuntu expert , and believe me if my problem solve i will switch to it ( cause all i do is writing and taking photos i am tired of malewares and etc ) Now i have ubuntu and fedora installed ( after a long read through guides ) , both of them show infected folder as empty ( in windows 7 i see this strange folders , you can see in picture )

  Read the article

• How to calibrate Toshiba LED screen - the colours are over saturated

  - by user94369

  I have purchased a new Toshiba Satellite C850-A812 laptop, with ATI Radeon HD 75xx series. When i first installed Ubuntu 12.04.1, the open source driver worked like a charm with the colors, i mean the colors were so vivid. However after installing the ATI proprietary driver from the repos, the colors went too "whity" and too bright. I even installed the updated driver, and went further to download the latest driver from ATI and install it in vain. I tried to use the ubuntu build in calibration tool, but it keeps on asking me to enter the ICC profile before i proceed to calibrate. I played with the catalyst control center, tried everything possible, but still the colors are still wayyyyyyyyy over exposed. Please advice :)

  Read the article

• Grub can't find device on boot resulting in Grub Rescue

  - by user1160163

  So I have 2 hard drives a HDD 320GB and a SSD 20GB. Before I had Windows 7 on the HDD and Ubuntu on the SSD but wanted to get rid of windows and reinstall a clean Ubuntu on the SSD then use the HDD for storage. So I deleted everything from the HDD and set up the SSD with 18GB ext4 and 2GB Swap and installed Ubuntu on the 18GB ext4. Though now when I boot up I get "Error: No such device Grub Rescue" I have a live USB and I ran the Boot Repair following these instructions - grub rescue after install of Ubuntu 12.04 (dual boot) - it says successful though still have the same problem. This is the given URL from Boot Repair - http://paste.ubuntu.com/1257988/ Thanks for any help given.

  Read the article

• Autodesk Maya 2012 x64 on Ubuntu 11.10

  - by anthony

  I've been searching everywhere for a solution to this problem and I'm pretty new to Linux. I have followed the instructions on several blogs about installing Maya 2012 on Ubuntu, but when I try to run Maya via the "maya" command, I receive this error: /usr/autodesk/maya2012-x64/bin/maya.bin: error while loading shared libraries: libssl.so.6: cannot open shared object file: No such file or directory Can anyone help? I have no idea what to do...

  Read the article

• Ubuntu installed along side Win 8 but not shown in boot

  - by Mahesha999

  Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

  Read the article

• busybox initramfs prompt while attempting to install from live cd on 2nd hdd

  - by da92n

  busybox initramfs prompt while attempting to install from live cd on 2nd hdd I've created a partition in ext3 on my second hdd to intall linux however when i come to boot the CD i get directed to a busybox prompt with no other choice than help. Other topics i've read on the subject where bound to the idea ubuntu has been already installed, and that the partition needs to be just indicated or else... But since i've no ubuntu installed, neither have i any partition that ubuntu should consider like that... How can i go through that?

  Read the article

• How to automatically resize the Dash when screen dimensions change?

  - by St.W.

  I use a convertible thinkpad (x201t) and magick-rotation to rotate the screen by 90 degrees in tablet mode. Therefore after rotation the screen's width is only 800 points (the ordinary resolution is 1200x800). The Dash does not adapt to this new state and therefore if I click on it, it is oversized and I cannot reach the applications/files/buttons on its side. Is there a way to tell the Dash that it should only ever use a width of 800 pixels, or any other solution to automatically adapt its size when rotating?

  Read the article

• How do I install oracle jdk 7 on ubuntu server 12.04?

  - by Muhammad Sholihin

  Folks, I'm new in ubuntu server. As I understand it, Oracle retired the Operating System Distributor's License for Java, meaning that Canonical could no longer include the JDK or JRE in their APT repositories. This means no more "sudo apt-get install sun-java-whatever". I just following this tutorial and other question but i still can't installing the jdk. How do I install oracle jdk 7 on ubuntu server 12.04? Thanks in advance

  Read the article

< Previous Page | 597 598 599 600 601 602 603 604 605 606 607 608  | Next Page >