Search Results

Search found 46413 results on 1857 pages for 'system speech recognition'.

Page 603/1857 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• 5 x 3GB drives and 4 x 1500GB drive best raid setup?

  - by Zen_Silence

  Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• Where does truecrypt store the backup volume header?

  - by happygolucky

  When using WDE, where does (if anywhere) truecrypt store a backup volume header? As i know there is always a backup header for regular truecrypt volumes, however i am not sure if this applies when system encryption is used. Because if i damage the volume header in track 0, my password won't boot my system anymore. So there is no backup header on the drive? I read somewhere on a forum that truecrypt might have a backup header relative to some position from the END of the HDD, however this doesn't make sense as it could easily be wiped over by programs running in Windows. And how would truecrypt know where this backup is anyway?

  Read the article

• "Cannot allocate memory " error whle copying data from window to ubuntu

  - by John

  I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

  Read the article

• Who should own exim4 under debian?

  - by raindog308

  Installed debian from DVD. And now I see exim4 is running owned by UID 107. There is no user 107 in my /etc/passwd. Same problem on another system (owned by UID 101), so I suspect this is a debian problem...? Running squeeze on both. So under debian, who should own the mail system? This is what I have installed: # dpkg -l | grep exim ii exim4 4.72-6+squeeze2 metapackage to ease Exim MTA (v4) installation ii exim4-base 4.72-6+squeeze2 support files for all Exim MTA (v4) packages ii exim4-config 4.72-6+squeeze2 configuration for the Exim MTA (v4) ii exim4-daemon-light 4.72-6+squeeze2 lightweight Exim MTA (v4) daemon The binary itself is owned by root: -rwsr-xr-x 1 root root 758852 May 12 2011 /usr/sbin/exim4

  Read the article

• Sysprep.exe completely missing on both of my Windows 7 64bit machines. How should I find a workaround?

  - by Zoltán Tamási

  The sysprep.exe file is simply missing on my Windows 7 64bit machine. I tried to find it on another computer, but it wasn't found there either. I can't understand it, because on a lot of forums and even in the official articles there are a lot of references to this tool. I've checked system, system32, sysWOW64 folders, and even made a full search with Total Commander. I only found a sysprep folder in the system32 folder, but inside was only an en-US subfolder, which was empty. Then I thought I will give my Windows PE bootdisk a try, which I've created a while ago. No result, only the same empty en-US folder is present there as well. Please if anyone knows what's happening, point me to the right direction. I need to clone my system and I'm stuck right at the first step...

  Read the article

• Windows Server 2008 freezes when I run programs as administrator

  - by user5795

  I am working on a machine running Windows Server 2008. Every program I have tried to run (firefox, notepad, wordpad) works fine, but if I right-click on any item on the desktop or the start menu and select "Run as Administrator" it freezes. I can move the mouse around and open/close the start menu, but the items in the start menu do not change color when the mouse hovers over them. I googled for answers for some time but had no luck. Does anyone have any ideas that I could try? (Update: I forgot to mention that the machine is virtual and I am using VMWare Workstation. In order to answer the questions below, I have been going to the same snapshot of the system each time. This lets me start the system in the exact same place each time in order to answer your questions and test.) (Update: When I run any process as administrator and it freezes, I can start task manager, but I cannot see the new process (notepad, etc...) )

  Read the article

• OOF (Out of Office) is not working for remote users (Outlook Anywhere)

  - by Doughecka

  I'm not sure how long this issue has been happening, but recently a few of the remote sales users were going to a sales meeting and wanted to set their Out of Office... however in Outlook 2010, they get this error message: "Your automatic reply settings cannot be displayed because the server is currently unavailable" When I run the Exchange Remote Connectivity Analyzer, Autodiscover completes fine, but the next step fails: Exception details: Message: The request failed. The remote server returned an error: (403) Forbidden. Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException Stack trace: at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute() at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet) at Microsoft.Exchange.Tools.ExRca.Tests.EnsureEmptyFolderTest.PerformTestReally() Exception details: Message: The remote server returned an error: (403) Forbidden. Type: System.Net.WebException Stack trace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) I've done some research, but I have yet to find a working fix for this... it seems like some permissions are messed up in IIS, but I haven't figured out what.

  Read the article

• Getting Started with windows server 2008/2012

  - by hbrock

  First let me say, I am a programmer(not a super star) but I want to get more into the system/network administration side of things. This because there are more jobs for system/network administrators in the area I live. Right now I am using virtual machines to learn how windows 2008/2012 works and to build labs with. But how would I prove to an employer what my skill set is with windows 2008/2012? As a programmer I would point to my past projects, code samples, and so on. Thanks for any help.

  Read the article

• Browsing freezes after installing SP2 on Vista

  - by n21jc

  After installing SP2 on Vista 32-bit HP laptop, all browsers (Firefox, IE, Maxthon) periodically freeze randomly. It occurs when opening a new webpage. It might happen after 45 minutes of browsing, or 3 minutes. The only way to get out of it is to right click the taskbar, "end program", and say "close now" when it tries to search for a solution. Or occasionally, I have to hard reboot. It doesn't seem to correlate with any one particular type of webpage, but I'm assuming that something being loaded doesn't play well with my system. I would uninstall SP2, but it fixed several even more annoying system problems I'd had with my computer.

  Read the article

• Installing OpenVPN on Windows7

  - by Darcara

  It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

  - by Usagi

  So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

  Read the article

• Somebody knows why the sectors of the IBM floppy disk are named 1 to 8 (and not 0 to 7 )

  - by Olivier Briand

  I am now programming on a 8 bits Z80 computer with CP/M 2.2, (as a hobby) and the floppy disk format is IBM, 40 tracks, 8 sectors per track, 512 bytes per sector. free space is 154 Ko on each face of the disk. Why the sectors are indexed 1 to 8 (and not zero to seven, as usually is seen with computers)? The catalog of the floppy disk is on the track 1 (sector 1 to 4, 64 entries). I'm wondering is the catalog on track zero? Is the zero track reserved to included a system (as track 0 & 1 are reserved to the system on a CP/M floppy disk, and catalog is on track 2)?

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

• Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

  - by Rob

  Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

  Read the article

• Config Time Service on Server 2008 DC using Group Policy Only

  - by Ed Fries

  I want to configure the Time Service using only GP in a Server 2008 R2 domain. I have created a GP as follows: Computer Config, Policies, Administrative Templates, System, Windows Time Policy: =Global Configuration Settings -Enabled w/ default settings. Computer Config, Policies, Administrative Templates, System, Windows Time Policy,Time Providers: =Configure Windows NTP Client -Enabled w/ default settings. =Enable Windows NTP Client -Enabled w/ default settings. =Enable Windows NTP Server -Enabled w/ default settings. The policy is linked, enforced and applied to Domain Controllers OU. The GP modeling results shows the policy is in effect on the DC (Single DC domain) and the DC is recognized as the PDC emulator. I have run gpupdate /force and logged off/on. The issue is that the DC shows the time source as internal. I understand I can force this at the cmd line using w32tm to set the peer but I would like to understand what is missing in the GP. The default NTP Client GP setting includes time.windows.com,0x9 as the source but it does not appear to be taking effect.

  Read the article

• ATI Radeon Drivers works with which linux distribution and version? [closed]

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

  Read the article

• Disable writing RAID degraded mode

  - by jolivier

  I have a RAID5 with 5 disks on my machine and suspect the motherboard chipset to fail at some points and make my raid going in degraded mode. Last time it happened I noticed it on the failure of the 2nd drive connected to the same chipset and lost a lot of data. So I would like to prevent this, and especially I would like to have mdadm disable writes on the raid if one of the disk fails. So that in between I get notified, I recover and can use my system again. Sadly I could not find it in man mdadm so I was wondering if this is possible via a tool or hidden option since for me it looks like a standard feature of a RAID system. If this is not possible I would also be happy with a solution to stop the raid if degraded.

  Read the article

• Cannot access to any windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual windows xp can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• Windows XP freezes completely

  - by Max

  Lately my Win XP SP3 started to make problems. From time to time it freezes completely. Which means that the system does not react to mouse and keyboard. Keyboard led indicators also do not react to CAPS-, SCROLL-, NUM- LOCK keys. The problem is that I don't understand what causes this behavior and it seems to happen randomly. System event log also does not contain any clues. I'm thinking this could be some driver/hardware problem, but I don't know which. Are there any tools that would help me figure out the cause of this problem? Does anybody have any clue how can I fix this?

  Read the article

• Lotus Notes won't open a hyperlink/uri in a browser!

  - by Andy O

  I'm still new to Lotus, but I have LN 8.0.2, and have it set up to open hyperlinks "using the browser i have set as the default for this operating system" which in my case is Firefox 3.6.13. If I try to select "use the browser embedded in this client" then it just forgets it after I click save (ie if i go back into preferences it's reset to the default for this operating system option) Windows XP SP 3. Whenever I click on a link in an email...memo... then it does nothing and flashes an underscore underneath it. It's so basic and so annoying there must be something I'm missing. Any help please!

  Read the article

• What is a good solution for an intranet video portal (YouTube-like) site?

  - by Ken Pespisa

  I would like an easy-to-setup site to handle videos to be viewed internally by my company. YouTube is essentially the perfect solution except for its being public. I'm looking for a place where a few people can upload videos, and the system will return a page where they can watch that video in a browser. I figure this would involve a dedicated Web server to run the Web application and process the videos. I've searched and I don't think such a system exists, but I perhaps there's one out there in its infancy that doesn't rank high on Google yet. Essentially the site I'm looking for is what MediaWiki is to Wikis, or what StackExchange is to Q&A sites, but for videos. Thanks in advance!

  Read the article

• GRUB2 not detecting OS on raid partitions

  - by sleeves

  I have recently added a drive to a system and have successfully raid'ed (RAID-1) the paritions, with the exception of the boot partition. I have it ready and mirrored, but can't get GRUB2 (update-grub) to find it. System: Ubuntu 11.04 Raid Metadata: 1.2 If I run update-grub, it finds the kernel images on the /dev/sda2 partition (present root) but not the images on /dev/md127. /dev/md127 is composed of "missing" and "/dev/sdb2". fdisk on /dev/sdb confirms that sdb2 is of type fd (raid autodetect) and is also flagged bootable. I have two things I want to do. Make the boot.cfg on /dev/sdb2 have a menu option to have the root be /dev/md127 Install grub onto /dev/md127 so the actual boot.cfg from there is being used. Thanks!

  Read the article

• Can software operation damage an SD card?

  - by Borek

  My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >