Search Results

Search found 6099 results on 244 pages for 'mass effect'.

Page 61/244 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Wammu - USB Device Name?

    - by Paul
    I'm trying to get to my phone's filesystem through USB in Wammu, but I'm stuck in the configuration wizard when it asks for a USB device name. After about an hour of Internet searching, here are the failed solutions I've already tried, starting with the relevant information returned by lsusb in terminal. lsusb Bus 001 Device 003: ID 12d1:101e Huawei Technologies Co., Ltd. So I tried opening Wammu through sudo wammu in terminal and inputting "/dev/bus/usb/001/003" as the device name, which returns: Error opening device Device /dev/bus/usb/001/003 does not exist! and then "/dev/bus/usb/001/", which returns: Failed to connect to phone Description: Error opening device. Unknown, busy, or no permissions.<br> Function: Init<br> Error code: 2 Another proposed solution was to try "tail -f /var/log/messages" in terminal. But that only returned a "No such file or directory" message. Seemingly relevant dmesg info: [ 4739.716214] usb 1-1: new high-speed USB device number 8 using ehci_hcd [ 4739.854137] scsi9 : usb-storage 1-1:1.0 [ 4740.854416] scsi 9:0:0:0: CD-ROM HUAWEI T Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4740.867051] sr0: scsi-1 drive [ 4740.867806] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4740.870464] sr 9:0:0:0: Attached scsi generic sg1 type 5 I don't know why it is coming up as CD-ROM. But there it is. If you haven't noticed already, I'm an absolute beginner when it comes to Linux and terminal. So speaking to me like I'm a three year old is welcome if you can propose a solution. I'm running Ubuntu 12.04 LTS, and the phone is a Huawei U1250. My computer is an Acer Aspire One D250/KAV60. Any help is much appreciated.

    Read the article

  • Should I ditch a creative pet project in lieu of one that would demonstrate skills more applicable to an employer?

    - by Hart Simha
    I am currently working on a project on github that I think would be a good demonstration of my initiative, creativity and enthusiasm. It is an educational game I am developing in pygame that enables the user to learn to improve their development productivity by using vim, specifically with python, though learning to code faster with vim should be transferable to any language. I think this is something that might have a mass appeal and benefit to a lot of people in a measurable way. -However- I am graduating from college in a month (my degree is computer science with a minor in english), with no experience that is relevant to helping me get any kind of job in the field, and a gpa that doesn't tout my merits. I could pursue a career in game development, but it's not necessarily what I'm most interested in, and see myself applying to startups around the country. To the places I am looking at applying, showing that I have experience with pygame is going to be largely irrelevant, except in demonstration of my ability to code, period. A lot of skills that ARE more marketable, such a data modeling, GIS, mobile development, javascript, .net framework, and various web development technologies, are not going to be showcased by this project (on the upside, employers do like to see familiarity with git and python). I'm wondering if I should sink all my free time in the next couple of months into this project, since I'm motivated and interested in it, and if the value of being able to demonstrate ambition and 'good ideas' (for lack of a better term, and in my own opinion) will compensate for the absence of demonstrating more sought-after skills. I am probably at a point where I should either commit fully to this project now, or put it on the backburner in favor of something else, and I am leaning towards continuing with what I am already working on, because I think it's a great idea, and something achievable to me with enough dedication over the next couple months. But the most important thing to me is being able to get a job out of college, which I am exceedingly concerned about as the professional landscape which I am navigating for the first time is a lot more intimidating than I could have anticipated, with almost every job (even short-term contract positions) requiring years of experience which I lack. Oh, and in case anyone is interested, my repository is here: www.github.com/hmsimha/vimagine

    Read the article

  • Enterprise Software Development with Java by Markus Eisele

    - by JuergenKress
    This is a blog about software development for the enterprise. It focuses on Java Enterprise Edition (J2EE/Java EE). Beside this, I blog about Oracle WebLogic and GlassFish Server and other technologies that hit my road. Java Mission Control 5.2 is Finally Here! Welcome 7u40! It has been a while since we last heard of this fancy little thing called Mission Control. It came all the way from JRockit and was renamed to Java Mission Control. This is one of the parts which literally survived the convergence strategy between HotSpot and JRockit. With today's Java SE 7 Update 40 you can actually use it again. Java Mission Control 5.2 The former JRockit Mission Control (JRMC) is now called Java Mission Control (JMC) and is a tools suite which includes tools to monitor, manage, profile, and eliminate memory leaks in your Java application without introducing the performance overhead normally associated with tools of this type. Up to today the 5.1 version was available within the Oracle HotSpot downloads which could only be received by paying customers from the Oracle Support Website. Todays release is the first release of Java Mission Control that is bundled with the Hotspot JDK! The convergence project between JRockit and Hotspot has reached critical mass. With the 7u40 release of the Hotspot JDK there is an equivalent amount of Flight Recorder information available from Hotspot. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Markus Eisele,Java Development,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • How to copy all recovery points to another drive? - Norton Ghost

    - by chobo2
    Hi I have Norton Ghost and I have 2 drives dedicated to backing up my files. One is an external drive the other is internal. Now my internal drive has filled up with backups and I now want to copy all those backups to my external drive. However it seems to want me to do it one by one. Can I do it like a batch or some mass copy so it does one after another so I can say have my computer all night on? My plan was to fill up my internal drive - copy it to my external drive - fill up my external drive - copy it to my external drive. Once my external drive would be filled up I then would start deleting the oldest backups but that probably would give me like 6 months of backs that I can back through if I would ever need too.

    Read the article

  • Day 5 - Tada! My Game Menu Screen Graphics

    - by dapostolov
    So, tonight I took some time to mash up some graphics for my game menu screen. My artistic talent sucks...but here goes nothing...voila, my menu screen!! The Menu Screen The screen above is displaying 4 sprites, even though it looks like maybe 7... I guess one of the first things for me to test in the future is ... is it more memory efficient (and better frame rate) to draw one big background image OR tp paint the screen black, and place each sprite in set locations? To display the 4 sprites above, I borrowed my code from yesterday ... I know, tacky, but...I wanted to see it, feel it. Do you feel it? FEEL IT! (homer voice & shakes fist) Note: the menu items won't scale properly as it stands with this code, well pretty much they do nothing except look pretty... Paint.Net & Google Fun So how did I create that image above? Well, to create the background and 3 menu items I used Paint.Net. Basically, I scoured Google images for: a stone doorway, a stone pillar, an old book, a wizards hat, and...that's it pretty much it! I'll let you type in those searches and see if you can locate the images I used. I know, bad developer...but I figured since I modified the images considerably it doesn't count...well for a personal project it shouldn't count...*shrug* Anyhow, I extracted each key assest I wanted from each image and applied lots of matting, blurring, color changes, glow effects and such. Then, using my vivid imagination I placed / composed each of the layered assets into the mashed up the "scene" above. Pretty cool, eh? Hey, did you know, the cool mist effect is actually a fire rendition in Paint.net? I set it to black & white with opacity set next to nothing. I'm also very proud of the yellow "light" in the stone doorway. I drew that in and then applied gausian blur to it to give it the effect of light creeping out around the door and into the room...heheh. So did I achieve the dark, mysterious ritual as I stated in my design doc? I think I had a great stab at it! Maybe down the road I can get a real artist to crank out some quality graphics for the game... =) So, What's Next? Well, I don't have that animated brazier yet...however, I thought it would be even cooler if I can get that door pulsing that yellow light and it would be extremely cool to have the smoke / mist moving across the screen! Make the creative ideas stop!! (clutches head) haha! I'm having great fun working on this project =) I recommend others giving something like this a try, it's really fulfilling. OK. Tomorrow... I think I'm going to start creating some game / menu objects as per the design doc, maybe even get a custom mouse cursor up on the screen and handle a couple of mouse events, and lastly, maybe a feature to toggle a framerate display... D.

    Read the article

  • Bookmark Sentry Scans Your Chrome Bookmarks File For Bad Links and Dupes

    - by Jason Fitzpatrick
    Chrome: Bookmark Sentry, a free Chrome extension, takes the hard work out of checking your bookmark file for bad links and duplicates. Install it, forget about it, and get scheduled reports on the state of your bookmarks file. It’s that simple. Once you install the extension, open the options to toggle some basic settings to your liking (like the frequency of the scan, how long you want it to wait for a response, and whether you want it to look for bad links and/or duplicates). Once it finishes scanning you’ll get a report indicating the status of the links (why they are marked as missing or duped) and the ability to selectively or mass delete them. The only caveat we’d share is that it will tell you links behind any sort of security are unavailable. If you bookmark pages that you use for work, behind your corporate firewall for example, if the scanner runs when you’re not authenticated then it won’t be able to reach them. Other than that, it works like a charm. Bookmark Sentry is free, Google Chrome only. Bookmark Sentry [via Addictive Tips] How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

    Read the article

  • Jumping with Mecanim synchronization

    - by Abhishek Deb
    I am using Unity3D 4.1 for one of my projects. I have a robot character which is always running. I am using mecanim animation system. What I really want:When I press Space bar, the character should jump up in the air, triggering an animation clip and then by the time it reaches the ground, the animation clip should also end. What actually is happening:When I press Space bar, the character jumps in the air. Animation clip plays as it should, but ends way before it reaches the ground. So, it looks like he is running in the mid air. What have I done: I have this humanoid robot setup with a jump animation bounded with the space bar key. Also, instead of using root motion, I am directly moving the robot from code. //Jumping if(Input.GetKeyDown(KeyCode.Space)){ rigidbody.AddForce(Vector3.up*jumpVelocty); anim.SetBool("Jump",true); } else anim.SetBool("Jump",false); Character's Details: Rigidbody = Mass:30, Freeze rotaion:x,y,z Capsule Collider = Material: metal, center(0,4.5,0), radius:1, height:11 Script = jumpVelocity:20000 Jump Animation Clip: ~ 2 seconds. I am really out of ideas how to synchronize everything. Should I make the character jump in some other way so that it quickly comes down and touches the ground to match the animation clip? If yes, please provide a direction.

    Read the article

  • Better way to generate enemies of different sub-classes

    - by KDiTraglia
    So lets pretend I have an enemy class that has some generic implementation and inheriting from it I have all the specific enemies of my game. There are points in my code that I need to check whether an enemy is a specific type, but in Java I have found no easier way than this monstrosity... //Must be a better way to do this if ( enemy.class.isAssignableFrom(Ninja.class) ) { ... } My partner on the project saw these and changed them to use an enum system instead public class Ninja extends Enemy { //EnemyType is an enum containing all our enemy types public EnemyType = EnemyTypes.NINJA; } if (enemy.EnemyType = EnemyTypes.NINJA) { ... } I also have found no way to generate enemies on varying probabilities besides this for (EnemyTypes types : enemyTypes) { if ( (randomNext = (randomNext - types.getFrequency())) < 0 ) { enemy = createEnemy(types.getEnemyType()); break; } } private static Enemy createEnemy(EnemyType type) { switch (type) { case NINJA: return new Ninja(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); case GORILLA: return new Gorilla(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); case TREX: return new TRex(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); //etc } return null } I know java is a little weak at dynamic object creation, but is there a better way to implement this in a way such like this for (EnemyTypes types : enemyTypes) { if ( (randomNext = (randomNext - types.getFrequency())) < 0 ) { //Change enemyTypes to hold the classes of the enemies I can spawn enemy = types.getEnemyType().class.newInstance() break; } } Is the above possible? How would I declare enemyTypes to hold the classes if so? Everything I have tried so far as generated compile errors and general frustration, but I figured I might ask here before I completely give up to the huge mass that is the createEveryEnemy() method. All the enemies do inherit from the Enemy class (which is what the enemy variable is declared as). Also is there a better way to check which type a particular enemy that is shorter than enemy.class.isAssignableFrom(Ninja.class)? I'd like to ditch the enums entirely if possible, since they seem repetitive when the class name itself holds that information.

    Read the article

  • How can a usb be detected but not show up anywhere?

    - by George Mauer
    I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

    Read the article

  • USB to IDE/SATA adapter

    - by unknown (google)
    I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

    Read the article

  • CodePlex Daily Summary for Saturday, July 27, 2013

    CodePlex Daily Summary for Saturday, July 27, 2013Popular ReleasesSharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.10: - Added support for RAR Decryption (thanks to https://github.com/hrasyid) - Embedded some BouncyCastle crypto classes to allow RAR Decryption and Winzip AES Decryption in Portable and Windows Store DLLs - Built in Release (I think)Memory Teaser Game: Full Release 1.1.0: -> Fixed Memory leak issue. -> Restart game button issue. -> Added Splash screen. -> Changed Release Icon. This is the version 1.1.0.0VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginOfflineBrowser: Preview Release: This is a preview release so that others can help me find bugs. This should be pretty stable, but any bugs found should be reported here as an Issue.Home Access Plus+: v9.4.0727: Released to allow you to disable secure LDAP queriesOpen Source Job board: Version X3: Full version of job board, didn't have monies to fund it so it's free.DSeX DragonSpeak eXtended Editor: Version 1.0.116.0726: Cleaned up Wizard Interface Added Functionality for RTF UndoRedo IE Inserting Text from Wizard output to the Tabbed Editor Added Sanity Checks to Search/Replace Dialog to prevent crashes Fixed Template and Paste undoredo Fix Undoredo Blank spots Added New_FileTag Const = "(New FIle)" Added Filename to Modified FileClose queries (Thanks Lothus Marque)Math.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...Microsoft .NET Gadgeteer: .NET Gadgeteer Core 2.43.800: The .NET Gadgeteer Core installer includes the core libraries and end user project templates for Microsoft .NET Gadgeteer. This is a prerequisite for end users to build and deploy .NET Gadgeteer projects. It includes a project template wizard in the New Project dialog in Visual Studio 2012 or 2010 (or express versions) under the Gadgeteer tab - ".NET Gadgeteer Application". This template uses a graphical designer built for Visual Studio which allows end users to visually configure .NET Gadget...FogBugzPd - Project Dashboard For FogBugz: 1.0: First public release of FogBugzPd. Zip File includes web application. Requires: IIS 7+ Sql Server 2008/2012 or Sql Server Express 2012 .NET 4.5Open Url Rewriter for DotNetNuke: Open Url Rewriter Core 0.4.3 (Beta): bug fix for removing home page New Tab with rules count for each Portal with memory use estimation OpenUrlRewriter_00.04.03_Install.zip : for dnn 6.01 to 7.06 OpenUrlRewriter71_00.04.03_Install.zip : for dnn 7.1KerbalAlarmClock: v2.5.0.0 Release: Version 2.5.0.0 Recompiled it for 0.21 Fixed some issues with Hyperbolic orbits and AN/DN NodesAJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.GoAgent GUI: GoAgent GUI 1.3.5 Alpha (20130723): ????????Alpha?,???????????,?????????????。 ??????????GoAgent???(???phus lu?GitHub??????GoAgent??????,??????????????????) ????????????????????????Bug ?????????。??????????????。 ????issue????,????????,????????????????。LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/New Projectsagree grammar engineering environment: agree is a concurrent parse/generation engine, a .NET implementation of the DELPH-IN joint reference formalism for natural language analysis. AWF's Utility Library: A collection of awf utilities C# chat client with server: Newest chat with client and server.Charming components for Windows Phone: Build Charming apps for Windows Phone. Adds ready-made Search, Share and Settings functionality to Windows Phone. Share more code across platforms.Darkorbit Configuration Manager: config manager dark orbit darkorbit eltepvpers heaven 'Heaven. configuration manager configurationmanagerDarkorbit MultiTool: dark orbit darkorbit multi tool mulitool heaven 'Heaven. elitepvpers awesome skylab bot trade bot techcenter bot multiaccount diabind: Python binding of DIA (Debug Interface Access) SDKDoodle .Net Connector: This library allows an easy access to the Doodle REST API.DssCECB Version 2.0: aaaeCommunity: e-communityEFDemo: This is a demo for Entity frameworkEmployee Directory Webpart in SharePoint 2010: Employee Directory for SharePoint 2010EntityContext: A lightweight wrapper around Entity Framework allowing for accessing some internals of the framework, as well as, some functionality usually required.EwsRelentless: This is a sample application which demonstrates you might place a heavy load of EWS calls against an Exchange server in order to test performance. FogBugzPd - Project Dashboard For FogBugz: This tool helps PMs, Tech Leads and Executives to see actual progress on the projects tracked in FogBugz.HP Battery Health Scan Script: Silently runs HP Battery Check Utility and saves result to an Access DB.I am following: Users can follow nearly everything in SharePoint 2013. This solution provides a list of followed contend where ever you need it in you SharePoint.Image Viewer: Simple image viewer written for academic purposes LIBRERIA PRISA: sistema de ventasLiduv: Facilitate teachers daily work including creating marks and lesson drafts, curricula and calculating marks for written tests etc.Maze Builder Library: A builder for random maze generationPayPal Express Checkout for nopCommerce: nopCommerce plugin to allow for PayPal Express Checkout. Full integration with shipping options.PsTest - UnitTesting for PowerShell: PsTest is a lightweight UnitTesting Module for use in PowerShell. It lets PowerShell users create, discover and run UnitTests in PowerShell.SIGE: sistema integral gestion educativaSql Mass Dumper: Sql Mass Dumper. A simple project to dump all the data in your SQL Server in XML or in JSON format.SSIS Wait Task: A SSIS task which suspends execution for a time period or until a specific time. Additionally a sql statement can be defined that can also delay execution.Tactical Combat - Unity3d Game: A first person shooter! The main character is Billy Hills, need a story plot.The open source customer relation and billing software.: Memtem in a open source customer relation and billing software written in C#.NET.Tridion Gateway Service: WCF Support for the Tridion TOM COM APIWINJS CTK: WinJS Control kit is a set of custom WINJS controls that are not supported by Windows 8.

    Read the article

  • nagios wrongly reports packet loss

    - by Alien Life Form
    Lately, on my nagios 3.2.3 install (CentOS5, monitoring ~ 300 hosts, 1150 services) has sdtarted to occasionally report high packet loss on 50-60 hosts at a time. Problem is it's bogus. Manual runs of ping (or its own check_ping binary) finds no fault with any of the affected hosts. The only possible cures I found so far are: run all the checks manually (they will succeed but it may act up again on next check) acknowledge and wait for the problem to go away (may take several ours) I suspect (but have no particular reason other than single rescheduled checks succeeding) that the problem may lay with all the checks being mass scheduled together - in which case introducing some jitter in the scheduling (how?) might help. Or it may be something completely different. Ideas, anyone?

    Read the article

  • Patch msp into msi package

    - by Kvad
    The latest update of Windows Live Messenger is an msp added to the package. I want to patch a msp into an msi. Reference download http://wl.dlservice.microsoft.com/download/8/3/D/83D75746-DF04-45E9-8374-BD31B9419128/en/wlsetup-all.exe I extract all msi and msps from this. (To get the msp and msi's I did the following Use resource hacker to open up wlsetup-all.exe In the left hand tree browse to PACKAGE Right click PACKAGE, save PACKAGE resources Save to a new temp folder Eg. D:\temp\package.rc This will output a whole lot of .bin files These are just cab files so we need to do a mass rename “ren *.bin *.cab” Once done select all cab files and extract to a new sub folder \extracted In \extracted you will see all the msi, msp and 7z files you need) I try to apply the msp directly with no result msiexec /p messenger.msp /a messenger.msi I also try doing a admin install with nothing being extracted.

    Read the article

  • Galaxy Note II MTP on Ubuntu 12.04

    - by Anass Ahmed
    I bought a branding new Galaxy Note II and I tried to mount its storage to my ubuntu laptop. As you know, Android 4.0+ uses MTP by default. Android 4.1 doesn't support USB Mass Storage anymore! So I have to use MTP to open my files via USB. I followed this article to get it work. It worked only for External Memory Card. but the internal cannot be reached! $mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /media/Islamics type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda8 on /media/Technology type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda7 on /media/Misc type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/anass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=anass) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev) mtpfs on /media/GalaxyNote2 type fuse.mtpfs (rw,nosuid,nodev,allow_other,user=anass)

    Read the article

  • IIS site hacked with ww.robint.us malware

    - by sucuri
    A bunch of IIS sites got hacked with a javascript malware pointing to ww.robint.us/u.js. Google cache says more than 1,000,000 different pages got affected: http://www.google.com/#hl=en&source=hp&q=http%3A%2F%2Fww.robint.us%2Fu.js http://blog.sucuri.net/2010/06/mass-infection-of-iisasp-sites-robint-us.html My question is: Did anyone here got hacked with that and still have any logs (or network dump) available for analysis? If you do, have you spotted anything interesting in there? Sites as big as wsj.com got hacked and some people are saying that maybe a zero-day on IIS/ASP.net is in the wild...

    Read the article

  • Get to Know a Candidate (6 of 25): Jill Stein&ndash;Green Party

    - by Brian Lanham
    DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Stein is a physician with degrees from Harvard College and Harvard Medical School.  She serves on the boards of Greater Boston Physicians for Social Responsibility and MassVoters for Fair Elections, and has been active with the Massachusetts Coalition for Healthy Communities Jill Stein advocates a "Green New Deal" in which renewable energy jobs would be created to address climate change and environmental issues with the objective of employing "every American willing and able to work". Citing the research of Dr. Phillip Harvey, Professor of Law & Economics at Rutgers University, as evidence of the successful economic effects of the 1930s' New Deal projects, Stein would fund the plan with a 30% reduction in the U.S. military budget, returning US troops home, and increasing taxes on areas such as capital gains, offshore tax havens and multimillion dollar real estate. Stein plans on impacting what she sees as a growing convergence of environmental crises in water, soil, fisheries and forests, through the creation of sustainable infrastructure based in clean renewable energy generation and sustainable communities principles such as increasing intra-city mass transit and inter-city railroads, creating 'complete streets' that safely encourage bike and pedestrian traffic and regional food systems based on sustainable organic agriculture The Green Party of the United States was founded in 1991 as a voluntary association of state green parties. With its founding, the Green Party of the United States became the primary national Green organization in the United States, eclipsing the Greens/Green Party USA, which emphasized non-electoral movement building. The Green Party of the United States of America emphasizes environmentalism, non-hierarchical participatory democracy, social justice, respect for diversity, peace and nonviolence. Their "Ten Key Values," which are described as non-authoritative guiding principles, are as follows: Grassroots democracy Social justice and equal opportunity Ecological wisdom Nonviolence Decentralization Community-based economics Feminism and gender equality Respect for diversity Personal and global responsibility Future focus and sustainability The Green Party does not accept donations from corporations. Thus, the party's platforms and rhetoric critique any corporate influence and control over government, media, and American society at large. Stein has access to 403 electoral votes and is a write-in candidate in GA, IN, and MS Learn more about Jill Stein and Green Party on Wikipedia.

    Read the article

  • How to get my laptop to detect SD cards inserted into its built-in card reader?

    - by Candelight
    My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

    Read the article

  • No Wireless In Ubuntu 13.10

    - by viktorhubinette
    When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Error X3650 when compiling shader in XNA

    - by Saikai
    I'm attempting to convert the XBDEV.NET Mosaic Shader for use in my XNA project and having trouble. The compiler errors out because of the half globals. At first I tried replacing the globals and just writing the variables explicitly in the code, but that garbles the Output. Next I tried replacing all the half with float vars, but that still garbles the resulting Image. I call the effect file from SpriteBatch.Begin(). Is there a way to convert this shader to the new pixel shader conventions? Are there any good tutorials for this topic? Here is the shader file for reference: /*****************************************************************************/ /* File: tiles.fx Details: Modified version of the NVIDIA Composer FX Demo Program 2004 Produces a tiled mosaic effect on the output. Requires: Vertex Shader 1.1 Pixel Shader 2.0 Modified by: [email protected] (www.xbdev.net) */ /*****************************************************************************/ float4 ClearColor : DIFFUSE = { 0.0f, 0.0f, 0.0f, 1.0f}; float ClearDepth = 1.0f; /******************************** TWEAKABLES *********************************/ half NumTiles = 40.0; half Threshhold = 0.15; half3 EdgeColor = {0.7f, 0.7f, 0.7f}; /*****************************************************************************/ texture SceneMap : RENDERCOLORTARGET < float2 ViewportRatio = { 1.0f, 1.0f }; int MIPLEVELS = 1; string format = "X8R8G8B8"; string UIWidget = "None"; >; sampler SceneSampler = sampler_state { texture = <SceneMap>; AddressU = CLAMP; AddressV = CLAMP; MIPFILTER = NONE; MINFILTER = LINEAR; MAGFILTER = LINEAR; }; /***************************** DATA STRUCTS **********************************/ struct vertexInput { half3 Position : POSITION; half3 TexCoord : TEXCOORD0; }; /* data passed from vertex shader to pixel shader */ struct vertexOutput { half4 HPosition : POSITION; half2 UV : TEXCOORD0; }; /******************************* Vertex shader *******************************/ vertexOutput VS_Quad( vertexInput IN) { vertexOutput OUT = (vertexOutput)0; OUT.HPosition = half4(IN.Position, 1); OUT.UV = IN.TexCoord.xy; return OUT; } /********************************** pixel shader *****************************/ half4 tilesPS(vertexOutput IN) : COLOR { half size = 1.0/NumTiles; half2 Pbase = IN.UV - fmod(IN.UV,size.xx); half2 PCenter = Pbase + (size/2.0).xx; half2 st = (IN.UV - Pbase)/size; half4 c1 = (half4)0; half4 c2 = (half4)0; half4 invOff = half4((1-EdgeColor),1); if (st.x > st.y) { c1 = invOff; } half threshholdB = 1.0 - Threshhold; if (st.x > threshholdB) { c2 = c1; } if (st.y > threshholdB) { c2 = c1; } half4 cBottom = c2; c1 = (half4)0; c2 = (half4)0; if (st.x > st.y) { c1 = invOff; } if (st.x < Threshhold) { c2 = c1; } if (st.y < Threshhold) { c2 = c1; } half4 cTop = c2; half4 tileColor = tex2D(SceneSampler,PCenter); half4 result = tileColor + cTop - cBottom; return result; } /*****************************************************************************/ technique tiles { pass p0 { VertexShader = compile vs_1_1 VS_Quad(); ZEnable = false; ZWriteEnable = false; CullMode = None; PixelShader = compile ps_2_0 tilesPS(); } }

    Read the article

  • How do I mount my Android phone?

    - by Amanda
    I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

    Read the article

  • Is there ever a reason to do all an object's work in a constructor?

    - by Kane
    Let me preface this by saying this is not my code nor my coworkers' code. Years ago when our company was smaller, we had some projects we needed done that we did not have the capacity for, so they were outsourced. Now, I have nothing against outsourcing or contractors in general, but the codebase they produced is a mass of WTFs. That being said, it does (mostly) work, so I suppose it's in the top 10% of outsourced projects I've seen. As our company has grown, we've tried to take more of our development in house. This particular project landed in my lap so I've been going over it, cleaning it up, adding tests, etc etc. There's one pattern I see repeated a lot and it seems so mindblowingly awful that I wondered if maybe there is a reason and I just don't see it. The pattern is an object with no public methods or members, just a public constructor that does all the work of the object. For example, (the code is in Java, if that matters, but I hope this to be a more general question): public class Foo { private int bar; private String baz; public Foo(File f) { execute(f); } private void execute(File f) { // FTP the file to some hardcoded location, // or parse the file and commit to the database, or whatever } } If you're wondering, this type of code is often called in the following manner: for(File f : someListOfFiles) { new Foo(f); } Now, I was taught long ago that instantiated objects in a loop is generally a bad idea, and that constructors should do a minimum of work. Looking at this code it looks like it would be better to drop the constructor and make execute a public static method. I did ask the contractor why it was done this way, and the response I got was "We can change it if you want". Which was not really helpful. Anyway, is there ever a reason to do something like this, in any programming language, or is this just another submission to the Daily WTF?

    Read the article

  • Do we have enough time to build an electric car future?

    - by julien.groues
    A recent article from Greenbang has posed the question 'Do we have enough time to build an electric car future?'. The writer discusses that, although the future of transport might lie with electric cars, there is concern regarding whether we'll be able to build the market and infrastructure required to support them, before carbon and oil constraints create difficulties in powering the vehicles. Of course, the increasing use of Electric vehicles (EVs) is going to put excessive pressure on energy grids, as large volumes of electricity will need to be directed to charging points, which in turn must handle fluctuating demand at peak times. EVs are increasing in popularity as a sustainable method of transport to reduce carbon consumption, and electric utilities will have the opportunity, and the challenge, to quickly determine the best methods to fuel these vehicles and accommodate the associated increases in demand for energy. Critically, efficient software is required to provide diagnostic and predictive capabilities related to EV refuelling - for example, anticipated electricity flow will need to be addressed as the number of EVs on the road increases, and electricity will need to be directed to specific areas on-demand as vehicles attempt to recharge en-mass. But a smart grid infrastructure can meet these demands, intelligently. The implementation of a smart grid is not in the distant future, it is an achievable reality for utilities via simple installation of new software and technologies, which can be done incrementally for those facing existing legacy systems or concerned with upfront costs. The smart grid is integral to the monitoring and control of energy use as well as the future-proofing of the energy grid. A smart grid will be critical to meeting the electricity requirements of new EVs and will ensure their successful deployment by providing a reliable foundation for the data handling required to record and manage electricity distribution - from recording and assessing energy usage, to analysing data and sharing information with consumers via green billing. http://www.greenbang.com/do-we-have-enough-time-to-build-an-electric-car-future_14248.html

    Read the article

  • ArchBeat Link-o-Rama for 2012-09-18

    - by Bob Rhubart
    Eye on Architecture This week the Oracle Technology Network Solution Architect Homepage features an Oracle Reference Architecture for Software Engineering, a new podcast focusing on why IT governance is important whether you like it or not, and information on the next free OTN Architect Day event. Enabling WebLogic Administrator Group Inside Custom ADF Application | Andrejus Baranovskis A short but informative technical post from Oracle ACE Director Andrejus Baranovkis. Oracle OpenWorld 2012 Hands-on Lab: Leading Your Everyday Application Integration Projects with Enterprise SOA Yet another session to squeeze into your already-jammed Oracle OpenWorld schedule. This hands-on lab focuses on how "Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects." Mass Metadata Updates with Folders | Kyle Hatlestad "With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced," explains Fusion Middleware A-Team blogger Kyle Hatlestad. "This is meant to replace the folder architecture of 'Folders_g'. While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten." Creating your first OAM 11g R2 domain | Chris Johnson Prolific Fusion Middleware A-Team Blogger Chris Johnson reads the Oracle Identity and Access Management Installation Guide so you don't have to (though you probably should). Thought for the Day "Each pattern describes a problem which occurs over and over again in our environment, and then describes the core of the solution to that problem, in such a way that you can use this solution a million times over, without ever doing it the same way twice." — Christopher Alexander Source: SoftwareQuotes.com

    Read the article

  • Observing flow control idle time in TCP

    - by user12820842
    Previously I described how to observe congestion control strategies during transmission, and here I talked about TCP's sliding window approach for handling flow control on the receive side. A neat trick would now be to put the pieces together and ask the following question - how often is TCP transmission blocked by congestion control (send-side flow control) versus a zero-sized send window (which is the receiver saying it cannot process any more data)? So in effect we are asking whether the size of the receive window of the peer or the congestion control strategy may be sub-optimal. The result of such a problem would be that we have TCP data that we could be transmitting but we are not, potentially effecting throughput. So flow control is in effect: when the congestion window is less than or equal to the amount of bytes outstanding on the connection. We can derive this from args[3]-tcps_snxt - args[3]-tcps_suna, i.e. the difference between the next sequence number to send and the lowest unacknowledged sequence number; and when the window in the TCP segment received is advertised as 0 We time from these events until we send new data (i.e. args[4]-tcp_seq = snxt value when window closes. Here's the script: #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[3]-tcps_snxt - args[3]-tcps_suna) = args[3]-tcps_cwnd / { cwndclosed[args[1]-cs_cid] = timestamp; cwndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / cwndclosed[args[1]-cs_cid] && args[4]-tcp_seq = cwndsnxt[args[1]-cs_cid] / { @meantimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = avg(timestamp - cwndclosed[args[1]-cs_cid]); @stddevtimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = stddev(timestamp - cwndclosed[args[1]-cs_cid]); @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); cwndclosed[args[1]-cs_cid] = 0; cwndsnxt[args[1]-cs_cid] = 0; } tcp:::receive / args[4]-tcp_window == 0 && (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { swndclosed[args[1]-cs_cid] = timestamp; swndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["swnd", args[2]-ip_saddr, args[4]-tcp_dport] = count(); } tcp:::send / swndclosed[args[1]-cs_cid] && args[4]-tcp_seq = swndsnxt[args[1]-cs_cid] / { @meantimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = avg(timestamp - swndclosed[args[1]-cs_cid]); @stddevtimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = stddev(timestamp - swndclosed[args[1]-cs_cid]); swndclosed[args[1]-cs_cid] = 0; swndsnxt[args[1]-cs_cid] = 0; } END { printf("%-6s %-20s %-8s %-25s %-8s %-8s\n", "Window", "Remote host", "Port", "TCP Avg WndClosed(ns)", "StdDev", "Num"); printa("%-6s %-20s %-8d %@-25d %@-8d %@-8d\n", @meantimeclosed, @stddevtimeclosed, @numclosed); } So this script will show us whether the peer's receive window size is preventing flow ("swnd" events) or whether congestion control is limiting flow ("cwnd" events). As an example I traced on a server with a large file transfer in progress via a webserver and with an active ssh connection running "find / -depth -print". Here is the output: ^C Window Remote host Port TCP Avg WndClosed(ns) StdDev Num cwnd 10.175.96.92 80 86064329 77311705 125 cwnd 10.175.96.92 22 122068522 151039669 81 So we see in this case, the congestion window closes 125 times for port 80 connections and 81 times for ssh. The average time the window is closed is 0.086sec for port 80 and 0.12sec for port 22. So if you wish to change congestion control algorithm in Oracle Solaris 11, a useful step may be to see if congestion really is an issue on your network. Scripts like the one posted above can help assess this, but it's worth reiterating that if congestion control is occuring, that's not necessarily a problem that needs fixing. Recall that congestion control is about controlling flow to prevent large-scale drops, so looking at congestion events in isolation doesn't tell us the whole story. For example, are we seeing more congestion events with one control algorithm, but more drops/retransmission with another? As always, it's best to start with measures of throughput and latency before arriving at a specific hypothesis such as "my congestion control algorithm is sub-optimal".

    Read the article

  • Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

    - by Lunchbox
    Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >