Search Results

Search found 20997 results on 840 pages for 'adobe ideas'.

Page 610/840 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

  - by Maniac13

  I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

  Read the article

• Upgrading Visio 2000 to Visio 2007

  - by dirtside

  I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

  Read the article

• Munin with postgresql 9.2

  - by jreid9001

  I am trying to set up Munin to collect stats on a server with postgresql 9.1 and 9.2 (the server is currently running 9.1, have tested on a fresh VM with 9.2 to rule out some weird problem on the running server. I had to patch some of the plugins for 9.2 due to renamed columns (e.g. procpid to pid), but that's no problem). Munin is installed from the EPEL repos, postgres from the official one. Both up to date. When I try to run munin-node-configure --suggest, I get this output: # The following plugins caused errors: # postgres_bgwriter: # Junk printed to stderr # postgres_cache_: # Junk printed to stderr # postgres_checkpoints: # Junk printed to stderr # postgres_connections_: # Junk printed to stderr # postgres_connections_db: # Junk printed to stderr # postgres_locks_: # Junk printed to stderr # postgres_querylength_: # Junk printed to stderr # postgres_scans_: # Junk printed to stderr # postgres_size_: # Junk printed to stderr # postgres_transactions_: # Junk printed to stderr # postgres_tuples_: # Junk printed to stderr # postgres_users: # Junk printed to stderr # postgres_xlog: # Junk printed to stderr After a lot of searching around, I edited /etc/munin/plugin-conf.d/munin-node and added the following: [postgres*] user postgres This stops munin-node-configure complaining about stderr and lets me add the plugins, but when I telnet to the server on 4949 and try to fetch the stats, I just get "Bad exit". When I run the plugin individually via munin-run (e.g. munin-run postgres_size_ALL ), it works completely fine. Looking at /var/log/munin/munin-node.log, this is the output: Error output from postgres_size_ALL: DBI connect('dbname=template1','',...)failed: could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/share/perl5/vendor_perl/Munin/Plugin/Pgsql.pm line 377 Service 'postgres_size_ALL exited with status 1/0. I am now out of ideas... the socket definitely exists, and pg_hba.conf is set to allow all users/databases from localhost with trust.

  Read the article

• VMware Workstation reboot 32-bit host when starting 64-bit guest

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

  Read the article

• Trying to use a SmartHost with my Exchange 2010 server

  - by Pure.Krome

  Hi folks, I'm trying to use a SmartHost with my Exchange 2010 Server. SmartHost details: Secure SMTPS: securemail.internode.on.net 465 <-- Note: that's port 465 Configure your existing SMTP settings (in your email program) to: use authentication (enter your Internode username and password, enter your username as [email protected]). enable SSL for sending email (SMTPS). So I've added the smart host details to my Org Config -> Hub Transport. I then used PowerShell to add the port:- Set-SendConnector "securemail.internode.on.net" -port 465 I've then added my username/password (as suggested above) to the SmartHost as Basic Authentication (with no TLS). Then I try sending an email and I get the following error message :- 451 4.4.0 Primary target IP address responded with: "421 4.4.2 Connection dropped due to ConnectionReset." So i'm not sure how to continue. I also tried ticking the TLS box but stll I get the same error. If i don't use SMTPS (secure SMTP, on port 465) and use basic SMTP on port 25 with no Authentication, email gets sent. Any ideas? EDIT: Btw, I can telnet to that server on port 465 from my mail server .. just to make sure i'm not getting firewall'd, etc.

  Read the article

• Email bouncing sent from Google

  - by davidmck

  I'm hoping someone here has an idea of where to look next. We have a domain we support which has email sent to it from one particular user bounce with the following message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unrouteable address (state 14). We only have reports of bouncing form this one particular user (who is someone we don't support - except they'd like to be able to contact our customer and we're trying to figure out if the problem is on our end). Many people can successfully send to this domain and the user who is getting bounce messages can send to other domains that we support (so it's clearly something specific with the princetonscoop.com domain and not our setup in general). I've reviewed the MX records multiple times and the server logs don't show a connection which generates this error (in fact this error is not one that our mail server would ever return). So it appears that google is contacting a different mail server for some reason. I have tested sending from my gmail account and that works. I believe the sender is using a google-apps account (the account they are using is from their own domain, not a gmail account). Any ideas on what might be happening here or what to test/investigate next? Thanks.

  Read the article

• directory services group query changing randomly

  - by yamspog

  I am receiving an unusual behaviour in my asp.net application. I have code that uses Directory Services to find the AD groups for a given, authenticated user. The code goes something like ... string username = "user"; string domain = "LDAP://DC=domain,DC=com"; DirectorySearcher search = new DirectorySearcher(domain); search.Filter = "(SAMAccountName=" + username + ")"; And then I query and get the list of groups for the given user. The problem is that the code was receiving the list of groups as a list of strings. With our latest release of the software, we are starting to receive the list of groups as a byte[]. The system will return string, suddenly return byte[] and then with a reboot it returns string again. Anyone have any ideas? code sample: DirectoryEntry dirEntry = new DirectoryEntry("LDAP://" + ldapSearchBase); DirectorySearcher userSearcher = new DirectorySearcher(dirEntry) { SearchScope = SearchScope.Subtree, CacheResults = false, Filter = ("(" + txtLdapSearchNameFilter.Text + "=" + userName + ")") }; userResult = userSearcher.FindOne(); ResultPropertyValueCollection valCol = userResult.Properties["memberOf"]; foreach (object val in valCol) { if (val is string) { distName = val.ToString(); } else { distName = enc.GetString((Byte[])val); } }

  Read the article

• Windows XP laptop doesn't appear in WSUS All computers list

  - by George

  I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

  Read the article

• Object Not found - Apache Rewrite issue

  - by Chris J. Lee

  I'm pretty new to setting up apache locally with xampp. I'm trying to develop locally with xampp (Ubuntu 11.04) linux 1.7.4 for a Drupal Site. I've actually git pulled an exact copy of this drupal site from another testing server hosted at MediaTemple. Issue I'll visit my local development environment virtualhost (http://bbk.loc) and the front page renders correctly with no errors from drupal or apache. The issue is the subsequent pages don't return an "Object not found" Error from apache. What is more bizarre is when I add various query strings and the pages are found (like http://bbk.loc?p=user). VHost file NameVirtualHost bbk.loc:* <Directory "/home/chris/workspace/bbk/html"> Options Indexes Includes execCGI AllowOverride None Order Allow,Deny Allow From All </Directory> <VirtualHost bbk.loc> DocumentRoot /home/chris/workspace/bbk/html ServerName bbk.loc ErrorLog logs/bbk.error </VirtualHost> BBK.error Error Log File: [Mon Jun 27 10:08:58 2011] [error] [client 127.0.0.1] File does not exist: /home/chris/workspace/bbk/html/node, referer: http://bbk.loc/ [Mon Jun 27 10:21:48 2011] [error] [client 127.0.0.1] File does not exist: /home/chris/workspace/bbk/html/sites/all/themes/bbk/logo.png, referer: http://bbk.$ [Mon Jun 27 10:21:51 2011] [error] [client 127.0.0.1] File does not exist: /home/chris/workspace/bbk/html/node, referer: http://bbk.loc/ Actions I've taken: Move Rewrite module loading to load before cache module http://drupal.org/node/43545 Verify modrewrite works with .htaccess file Any ideas why mod_rewrite might not be working?

  Read the article

• Can you share offline files cache with two user accounts?

  - by Joel Coehoorn

  I have a new laptop that I use for both home and work. It runs windows 7 ultimate, and is joined to the domain at work. It is okay to use this laptop for both work and personal activities, and I even have an account set up on the local machine in addition to the work domain account specifically for this to help keep the two separate. At home, I have a file server that I use to share files and printers with my wife's laptop, this new laptop, and my old desktop which will now become the family machine. My mp3 library is on there, among other things. What I want to do is use the windows Offline Files feature to keep a synced copy of my music library on the laptop. That part is easy. What's tricky is that I want to share this offline cache between both the local account on the laptop and my work domain account. I could do them both separately, but then I have two copies of a very large music library stored locally. This also means twice the sync burden, when the domain account is rarely connected to the file share. I really want to be able to sync from the local machine account only, and have the domain account be able to use the synced files. I know where the offline file cache is kept (\Windows\CSC) and I can find the cached files (not encrypted), but permissions on the cache are setup weird, and so using that cache directly is not trivial. Any ideas appreciated.

  Read the article

• Finding cause of TCP retransmission within a LAN

  - by Surreal

  Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

  Read the article

• Cisco 7206 error trying to copy running-config (Bad file number)

  - by jasondewitt

  I have a cisco 7206 that terminates a bunch of pppoa sessions for dsl users. Today I noticed that if I tried to "show run" nothing happened. I mean that it doesn't show anything and just sends me right back to the command prompt. I decided I should probably try and back up the config and that is where I'm stuck. Any time I try to copy the running-config to tftp or to pcmcia card that I know is not full I get the following error: %Error opening system:/running-config (Bad file number) I get this error when I try to do anything with the running config. I've been googling around, but I haven't found any thing else that talks about this error. I've seen people say to erase the nvram and then try to "copy run start", but I don't want to erase the nvram until I can pull off a copy of the running-config. I would try to reboot it, but the startup-config that is on the nvram looks to be woefully out of date (good job me!). Any ideas what might be wrong? or how I can get the running config off the router?

  Read the article

• VPN Error 691 but server says authenticated on server

  - by Andy

  Hello all, I have a problem with a vpn connection on Windows XP SP3 that appears to be related to an account (maybe privilleges or an option that I have missed). When connecting using my account, which is a domain administrator account it will connect to through the vpn fine. However, using an account created for another person they receive Error 691: Username or Password is not valid for this domain. On the domain controller (windows 2003) I see a logon successful message: User DOMAIN\user was granted access. Fully-Qualified-User-Name = int.company.net.au/People/Management/User NAS-IP-Address = 10.30.0.3 NAS-Identifier = not present Client-Friendly-Name = MelbourneCore Client-IP-Address = Router-ip Calling-Station-Identifier = not present NAS-Port-Type = Virtual NAS-Port = 77 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = undetermined Policy-Name = Remote VPN Access Authentication-Type = MS-CHAPv1 EAP-Type = Does anyone have any ideas as to where else I should look for finding a solution? If i use the wrong password it gives a logon failure error in the event viewer. Also removing them from the remote access group gives a logon failure error. Nothing appears in the event viewer on the local machine. In the past all that is required is to add them into our Remote Access Users group. Any help?

  Read the article

• mysqld-nt.exe exist in task list, but actually it's not running?

  - by PHP

  mysqld-nt.exe is showing in the task manager, but I cannot connect to it. I tried: telnet localhost 3306 And it fails to connect. So I restarted the server,and it's ok. This happens every day. Any ideas? EDIT Here is the error log(I didn't find anything abnormal though): 100122 10:11:16 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100122 10:11:16 InnoDB: Starting shutdown... 100122 10:11:18 InnoDB: Shutdown completed; log sequence number 0 22939338 100122 10:11:18 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100122 10:12:40 InnoDB: Started; log sequence number 0 22939338 100122 10:12:42 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL) 100123 16:20:44 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100123 16:20:44 InnoDB: Starting shutdown... 100123 16:20:46 InnoDB: Shutdown completed; log sequence number 0 22939832 100123 16:20:46 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100123 16:22:09 InnoDB: Started; log sequence number 0 22939832 100123 16:22:11 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL) 100125 9:18:59 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100125 9:18:59 InnoDB: Starting shutdown... 100125 9:19:00 InnoDB: Shutdown completed; log sequence number 0 22941001 100125 9:19:00 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100125 9:20:22 InnoDB: Started; log sequence number 0 22941001 100125 9:20:25 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL)

  Read the article

• Make a snapshot of a live mySQL database with myISAM & innoDB tables without locking

  - by Artem

  We have a live database in production where we are running out of space on the server. So I would like to transfer to a new server without any downtime (or as little downtime as possible). In general, I would also like to have a hot failover copy of the database available. I would like to use replication to get all of the data copied to the new machine, and then at some point flip a switch and have that new machine become the master (normal failover scenario). My problem is that I am not sure how to initialize replication without locking the db to make the initial snapshot I will use? Is there any way to do this? I know I could do it using single-transaction if I was using innoDB, but very unfortunately we have some myISAM tables in there (in fact the largest 150GB table is myISAM and I want to switch it to InnoDB but I can't do it until I have more space & a hot copy to switch to). Any ideas? Is there some way to make such a snapshot? Or is there alternatively a way to get replication to "catch up" without an snapshot for initialization?

  Read the article

• can't install mysql-devel on centos 6.5

  - by Latheesan Kanes

  I need mysql-devel package to be installed on my CentOS 6.5 running Percona 5.5 (already installed & running). When I try to install the devel package like this: yum --enablerepo=remi install mysql-devel I get the following error: Error: Package: mysql-devel-5.5.37-1.el6.remi.i686 (remi) Requires: real-mysql-libs(x86-32) = 5.5.37-1.el6.remi Available: mysql-libs-5.5.36-1.el6.remi.i686 (remi) real-mysql-libs(x86-32) = 5.5.36-1.el6.remi Available: mysql-libs-5.5.37-1.el6.remi.i686 (remi) real-mysql-libs(x86-32) = 5.5.37-1.el6.remi Error: Package: mysql-5.5.37-1.el6.remi.i686 (remi) Requires: real-mysql-libs(x86-32) = 5.5.37-1.el6.remi Available: mysql-libs-5.5.36-1.el6.remi.i686 (remi) real-mysql-libs(x86-32) = 5.5.36-1.el6.remi Available: mysql-libs-5.5.37-1.el6.remi.i686 (remi) real-mysql-libs(x86-32) = 5.5.37-1.el6.remi Error: mysql conflicts with Percona-Server-client-55-5.5.37-rel35.0.el6.i686 Here's what's currently installed on my server: [root@server1 ~]# yum list installed | grep mysql php-mysqlnd.i686 5.4.29-1.el6.remi @remi [root@server1 ~]# yum list installed | grep percona Percona-Server-client-55.i686 5.5.37-rel35.0.el6 @percona Percona-Server-server-55.i686 5.5.37-rel35.0.el6 @percona Percona-Server-shared-55.i686 5.5.37-rel35.0.el6 @percona [root@server1 ~]# Any ideas how to fix this dependency error?

  Read the article

• creating metapackages

  - by olpanis

  got some problems while creating metapackages tried to create a meta package containing forensic toolkits, on ubuntu i even got problems creating an .deb file. dpkg-source: error: can't build with source format '3.0 (quilt)': no orig.tar file found dpkg-buildpackage: error: dpkg-source -b forensics-0.1 gave error exit status 255 later i tried it using debian 5, creating the deb works, but there i got into some problems with Depends debian:/home/matthias/Desktop/meta# dpkg --install *.deb Wähle vormals abgewähltes Paket meta. (Lese Datenbank ... 96897 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke meta (aus meta_0.1-1_i386.deb) ... dpkg: Abhängigkeitsprobleme verhindern Konfiguration von meta: meta hängt ab von python (>= 2.6.6-2); aber: Version von python auf dem System ist 2.5.2-3. dpkg: Fehler beim Bearbeiten von meta (--install): Abhängigkeitsprobleme - lasse es unkonfiguriert Fehler traten auf beim Bearbeiten von: meta the file control looks like this: Source: meta Section: unknown Priority: extra Maintainer: root <[email protected]> Build-Depends: debhelper (>= 7) Standards-Version: 3.7.3 Homepage: <insert the upstream URL, if relevant> Package: meta Architecture: any Depends: python (>= 2.6.6-2) Description: short description forensic toolkits any ideas? kind regards

  Read the article

• How do I get a Wireless N PCi card to connect to a wireless G router?

  - by Andy

  I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

  - by g18c

  I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

  Read the article

• apache2: ssl_error_rx_record_too_long when visiting port 80?

  - by John

  Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): auto lo iface lo inet loopback #iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] /etc/apache2/ports.conf: Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> /etc/apache2/sites-enabled/mysite.conf: <VirtualHost [my second IP ]:80> ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf </VirtualHost> Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

  Read the article

• Postfix 554 <[email protected]>: Relay access denied

  - by Matt

  So i am trying to set postfix up and I am running into some problems.....here is my files vim /etc/postfix/main.cf relayhost = [smtp.gmail.com]:587 smtp_connection_cache_destinations = smtp.gmail.com smtp_sasl_auth_enable=yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_tls_security_options = noanonymous tls_random_source = dev:/dev/urandom smtp_tls_CAfile= /etc/pki/CA/cacert.pem smtp_tls_security_level = may smtp_tls_scert_verifydepth = 9 append_dot_mydomain = no readme_directory = no myhostname = maggie.deliverypath.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = maggie.deliverypath.com, localhost.deliverypath.com, , localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all I also have the gmail password info vim /etc/postfix/sasl_passwd gmail-smtp.l.google.com [email protected]:somepass smtp.gmail.com [email protected]:somepass then I try to follow this article and i get this output telnet mail.demoslice.com 25 Trying 67.207.128.80... Connected to www.slicehost.com. Escape character is '^]'. 220 www.slicehost.com ESMTP Postfix (Ubuntu) HELO test.demoslice.com 250 www.slicehost.com MAIL FROM:<[email protected]> 250 Ok RCPT TO:<[email protected]> 554 <[email protected]>: Relay access denied its started service postfix start * Starting Postfix Mail Transport Agent postfix ...done. then the screen gets frozen and i cant do anything....any ideas

  Read the article

• Primary zone will not transfer to secondary zone

  - by Matt Beckman

  Using DNS on Windows Server 2008, there is a constant struggle with adding primary and secondary zones. I will add a primary zone to NS1 for a new domain, edit it as needed, and when it's ready add the secondary zone to NS2. However, MOST of the time, the secondary zone remains in an error state, and will never acquire the primary zone data. I have gone back to domains a few weeks after adding them to find out that Windows never propagated the change. Annoying. Anyway, I recently updated SP1 to SP2 thinking this would help, but it hasn't. I added two new domains today, and spent an hour after the secondary zone would just not sync. During that time, the only error in the logs I had seen was for one of them where DNS complained about not being authoritative. In order to eventually resolve the issue, I ended up deleting the primary zone, creating a new primary zone, and hitting "Apply" after each and every field change. For example, after modifying the serial number from "1" to a date appropriate "2010093001", I hit apply, and then the Primary Server (apply), Responsible Person (apply), and finally Name Servers (apply). After I did this, the secondary zone didn't waste any time getting the data. Ideas?

  Read the article

• Powershell Copy-Item fails silently

  - by R W

  I have a powershell 2.0 script running on Windows Server 2008 R2 64bit that copies some Hyper-V .vhd files to another server as a 'backup solution'. The script gets a list of the .vhd's to copy then iterates over that list to copy them using Copy-Item. It also writes some logging info to a file as well. The files are copied to another server (Windows Server 2003 Sp2) into a directory compressed with NTFS compression. One of the files isn't copied. It's relatively big ~ 68Gb. The others are 20Gb or less. The wierd thing is that during the copy process the file appears on the destination server and the log file generated seems to indicate the file is copied due to the difference in the times of the log file entries. I see no error messages on the log file and nothing in the event log of either machine. Here's the code that does the copy. Get-ChildItem $VMSource *.vhd -Recurse | foreach-object { $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) started" $fullname = $_.FullName Add-Content $logFileName "$time : Copying $fullname to $VMDestination" Copy-Item $fullname $VMDestination -Force -ErrorAction SilentlyContinue -ErrorVariable errors foreach($error in $errors) { if ($error.Exception -ne $null) { Add-Content $logFileName "'tERROR COPYING FILE : $($error.Exception)" } } $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) finished" } I can only think there's some problem with copying a file that big to a compressed directory maybe? Any ideas?

  Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >