Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 615/678 | < Previous Page | 611 612 613 614 615 616 617 618 619 620 621 622  | Next Page >

• Dead Linux server - need help and options

  - by Choi S.

  All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

  Read the article

• Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

  - by William

  I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

  Read the article

• Recover windows cached domain password

  - by theguy

  I have a computer from another small organization that works with our school. It was previously joined to another domain from elsewhere. The organization doesn't have an IT person so they didn't think of what they needed to do about the information on the computer before they moved it to our school. The previous user of the computer is no longer with the organization so no information about the password. The computer has information that needs to be accessed and programs so putting the hard drive on another computer and grabbing the information is a no go as I need the computer itself to be working as well. The computer is running Windows Vista Business Edition and is joined to a domain with a cached profile. The admin accounts are disabled by GPO. I've been asked to see if I could recover the password but running ophcrack gave me no hits on the cached profile. I'm not too familiar with password recovery tools that would work on a cached profile from a domain so I'm looking for answers here. Any other suggestions? Preferably something free as we're a small school and an easy to use liveCD solution like ophcrack would be appreciated.

  Read the article

• Locked out of our Comcast Business Gateway for seemingly no reason

  - by Tyler

  A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

  Read the article

• Whats the best cloud backup solution for a small scale server environment?

  - by nbv4

  I have a server that runs a postgres database that contains about 200MB of data. Currently I have a cron job setup on my home computer which: ssh's into my server runs a remote script which makes a backup of the database scp's that dump over to my local hard drive for storage. Each dump is 20MiB. does this every six hours (one months of backups is roughly 2GiB) The problem with this setup is that if my local machine goes down for whatever reason, no backups will be made. Also, I can't have the cron run from the server, because I can't have it scp'd to my local machine from my server (firewalls and all that crap). My local machine is running Ubuntu 10.04, and my server is Ubuntu 9.10 server edition. I looked into Ubuntu One, but currently it's gui-only. I also looked into dropbox, but it's a pain in the ass to get setup in linux without gui support. Amazon S3 looks good but it's not free (yet dirt cheap). Is there any other alternative that I should look into? I'd prefer something where I can just have my script dump the database into a directory, and have the backup service 'watch' that folder and sync accordingly. I can maybe also have my local machine sync to the cloud backup so I have even more redundancy, plus easy access to my backups for use in testing. Edit: My server is a VPS, so what solution I end up using has to be 100% software based.

  Read the article

• hyper-v cluster behavior when losing network connectivity

  - by ChristopheD

  Setup: (rather new) Hyper-V R2 cluster with 2 nodes (in failover configuration). Fysical host OS: Windows Server 2008. About eight VM's (mixed: Windows Server 2008 and Linux) Yesterday we had a power outage of about 15 minutes. Our blades are on UPS so the fysical host machines (Windows Server 2008) never went down. Our main switches are not on UPS (yet) and we saw the behaviour similar to the following (as distilled from the event logs). The nodes in the cluster lost means of communication (because the external switches went down). The cluster wants to bring down one (the first) of the nodes (to start failover?). The previous step impacts clustered storage where the virtual machine VHD's are located. All VM's got brutally terminated and were found in a failed state in the failover manager in the host OS'es. The Linux VM's were kernel panicking and looked like they had their disk ripped out. This whole setup is rather new to us, so we are still learning about this. The question: We are putting switches on UPS soon but were wondering if the above is expected behavior (seems rather fragile) or if there are obvious improvements configuration-wise to handle such scenario's ? I can upload an evtx file concerning what exactly was going on in case that's necessary.

  Read the article

• RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

  - by Ed

  I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• ssh hangs on "Last login" line

  - by Pavel H

  This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

  Read the article

• Windows 7 x64 support for Intel GMA 3650 (or GMA 3600)

  - by Loom

  I recently purchased an Intel D2700 MUD motherboard and I cannot find drivers for the Win7 x64 integrated graphics (Intel GMA 3650 aka PowerVR sgs545). The accompanying CD contains Win7 x32 version only. When I run it I got an error: This computer does not meet the minimum requirements for installing the software. I tried to use online utility Intel Driver Update Utility Graphics. I used Chrome, Firefox, Internet Explorer without success. First, UAC prompt appear, and then endlessly spinning progress-bar with text "Analyzing computer...". The text in UAC prompt is: Program file name: System Requirements Lab Verified publisher: Husdawg, LLC I downloaded this utility (intel_srldetect_4.5.5.0) and started it from my hard disk. I got an error: A network error occured while attempting to read from the file: C:\Users\Loom\Downloads\SystemRequirementsLab_intel_4.5.5.0.msi Standard VGA driver works for this video card but without hardware acceleration: Hardware acceleration is either disabled or not supported by your video card driver, which could slow game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. Where I can get appropriate driver?

  Read the article

• Cannot install windows. Compaq Presario CQ62

  - by Matthew

  I bought a used Compaq Presario CQ62 for cheap, and went to install windows on it. I formatted the partition and went to install when I got this error.... Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017 I have used this disk before with no problems, but internet searching suggested I burn one at 2x speed because that helps for some reason... I'm burning one now, but my question is, why would I get this error, OTHER than the disc being bad? I'm pretty certain this one isn't as I have used it before... (ok so the slowly burned cd (using imgburn) didn't work either so it's DEFINITELY not the disc) Thanks in advanced for any answers Also I took one stick of ram out because internet searching also suggested that, but it didn't make a difference. Also I ran memory and hard drive checks and they passed fine. Also I reset the motherboard options to default What could it be!? Help I'm completely stumped...

  Read the article

• How do I set up Grub properly to quad-boot Windows, Mac OS X, Linux, and FreeBSD?

  - by Joe

  Grub has gone completely insane on me. My quad-boot system was working great up until I upgraded Ubuntu to 12.04. Since Ubuntu overwrote the Grub stuff I had to repair it with my Mac OS X and FreeBSD entries. After this, trying to boot Mac OS X gave me the error "couldn't open file" and FreeBSD gave the error "no such partition". Windows and Ubuntu worked fine. So I tried repairing again because I figured something must've gone wrong in the install process. Then only Ubuntu would boot. Trying to boot Windows would give me the error "no argument specified". I tried repairing Grub once again, since I seemed to be getting different results each time. This time, Ubuntu no longer appeared in the Grub menu, and the errors for the other OSes were the same. So I booted into the Ubuntu 12.04 live CD and ran Boot-Repair with recommended settings. Now Grub is completely skipped and Windows boots up. I have absolutely no idea what is going on or why I get different results every time I reinstall Grub. Here is how my partitions are set up: sda1 - Storage drive, sdb1 - Windows, sdb2 - Mac OS X, sdb3 - FreeBSD, sdb4 - Extended, sdb5 - Ubuntu, sdb6 - Shared storage, sdb7 - Shared Storage, Here's my grub.cfg file: grub.cfg

  Read the article

• Lost Windows 7 boot after EasyBCD with EFI

  - by drent

  I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

  Read the article

• Command line switching

  - by Larry

  I have read through some suggestions but I am just not technical enough to get this I think. I am a CAD designer and each file has 5 files associated with it. I have 3 sets of 5 files, and each set needs to go into its own zip file, placed on a separate server. For example: "C:\Program Files\7-zip\7z.exe" a file1.zip "O:\server2\map files\BC\BC.d*"-0 "C:\Program Files\7-zip\7z.exe" a file2.zip "O:\server2\map files\BC\ON.d*"-0 "C:\Program Files\7-zip\7z.exe" a file3.zip "O:\server2\map files\BC\AB.d*"-0 and I am in directory "S:\server\map files\provinces" (for example). These lines run within an existing batch file and by the time it reaches the 3 lines above, it's in the S: directory sample above. So it's looking on my pc for the 7-zip program, creating 3 zip file names which it does, but places those zip files on a separate server which it doesn't and the first zip file also includes all the other 10 files, the second zip file the same plus the first zip file, and the third the same with the other two zip files making me think the code isn't recognizing the part after file1.zip where I am trying to tell it what files to include and where to place the zip files. Ultimately, I want to either have the system create a new zip file if the old one was deleted, or copy the new files into the existing zip and overwrite any older files, and for these zip files to be placed in a separate location which is where we share our files with other personnel from within our company. The S: drive is for all originals, and O: is for sharing. Is there a list of all switching options with many different samples?

  Read the article

• Hibernation fails; The system cannot find the file specified

  - by GMMan

  Recently I installed Ubuntu 12.04.1 LTS on my Lenovo Y480. Hibernation was working properly after the Ubuntu install, but I was making sure all of the operating systems on my system worked, including OneKey Recovery (recovery partition). It is of note that I installed Windows 7 from scratch with a disk image I downloaded off of my university's DreamSpark program, and further to that I had to image the partition with Paragon Backup & Recovery, repartition to convert the Windows partition to extended, install Ubuntu, and then restore the image. During that process I also used the Windows disc to edit the BCD as to reuse the existing entry for the restored partition. I also used the automated "repair your computer" option. With verification, I noticed that the "repair your computer" option actually wrote to the wrong BCD (the recovery partition), and I mounted the partition and restored the original BCD (from a copy I made earlier), and rebooted. At this point my GRUB broke, and I was able to restore it. At this point hibernation broke. I tried powercfg /h off and powercfg /h on, rebooted, and nothing. Also tried increasing the hibernation file size as directed on this post, but it still doesn't work. Executing shutdown /h yields The system cannot find the file specified.(2). What file? It seems that mounting the system partition sometimes works, but I don't want to keep it mounted in case it gets written to accidentally. How do I permanently fix this?

  Read the article

• Safe to remove Python2.6 files?

  - by darkfeline

  I'm using Linux Mint 11 (will upgrade soon), and I've noticed that, even though I don't have any python2.6 packages installed with apt, there's a bunch of residual python2.6 files scattered around my drive, including, but not limited to, dist-packages in /usr/lib/python2.6 and various /usr/share stuff. Is there any way to test if these files are still being used? I'm tempted to sudo rm -rf the lot of them, but I'm scared it'll break stuff. Also, does anyone have any idea where these files could have come from? I believe I had python2.6 installed once upon a time, but I made sure to --purge them, so there shouldn't be any trace of them left, right? EDIT: after using a quick script to check all of the files, it appears most of them belong to important packages, so I won't try weeding out the few which I know are probably useless. Although I am curious why so many packages have python2.6 files when I don't even have it installed. These files are not associated with any packages and I'm not sure if they are safe to remove: /usr/bin/ipython2.6 /usr/lib/python2.6/dist-packages/distribute-0.6.15.egg-info /usr/lib/python2.6/dist-packages/easy_install.py /usr/lib/python2.6/dist-packages/IPython /usr/lib/python2.6/dist-packages/ipython-0.10.1.egg-info /usr/lib/python2.6/dist-packages/setuptools /usr/lib/python2.6/dist-packages/setuptools.egg-info /usr/lib/python2.6/dist-packages/setuptools.pth /usr/lib/python2.6/dist-packages/site.py /usr/lib/python2.6/dist-packages/wx.pth /usr/local/lib/python2.6 /usr/local/lib/python2.6/dist-packages /usr/local/lib/python2.6/site-packages /usr/share/man/man1/ipython2.6.1.gz

  Read the article

• I want to dual boot Windows 8 on a Macbook Pro that doesn't already have Windows. Do I have to buy Windows twice?

  - by Cam Jackson

  My girlfriend just bought a Macbook Pro, and she wants to to dual boot OSX with Windows. Specifically, she would like to use Windows 8. What I already know is the following: Windows 8 discs are only meant for upgrading from previous versions of Windows Windows 8 discs can be used to do a clean install, but (officially) only if there's already a legit version of Windows on the hard disk I've read somewhere of a disc being used to install Windows 8 on a fresh, out-of-the-box hard drive, and it all went well until the activation phase, where it said that the disc could only be used for upgrades The logical conclusion would be that in my circumstance, the only option is to buy a full (non-upgrade) retail copy of Windows 7, install that using boot camp, then load up Windows 7, insert the Windows 8 upgrade disc and do the 7-8 upgrade. However, I've read quite a few blog posts of people installing Windows 8 using bootcamp (e.g., Ars Technica, which leads me to believe that it might be possible to do so without installing Win7 first. The problem is that I'm not sure if these people were using preview versions, which obviously won't have the license issues down the track. Can anyone provide a definitive answer as to how to put Win8 on a Mac?

  Read the article

• Embedded Windows XP

  - by Kyle

  My company acquired a brake press for bending large structural steel plates. We received it second hand and it came with an embedded copy of windows XP. Now for the part that's driving me nuts: plug and play has been turned off, also accessibility options has been disabled. What does this mean for me? Keyboards will not work! Nothing that plugs into a USB port will work and it does not have a CD ROM drive. I have tried to turn on plug and play using the on screen keyboard but it is not there since accessibility options is turned off. I would just get an updated copy of the the embedded OS but they come from Sweden and are extremely expensive. I assume there has got to be a way to get a USB devices to work. We need to get a wifi adapter on it so I can use team viewer and remotely configure it for our needs. Things to keep in mind: There is no keyboard so everything has to be done with the mouse There is no PS2 port for a keyboard just a mouse. Odd. I am 5 states away from this location and have been working with a tech who is physically installing the machine. System 32 seems to be missing A LOT of files, the tech told me there is only 8 folders in there and no other files (I don't even understand how Windows is running like this). If anyone has ANY ideas I would appreciate it, I am unsure where to go from here.

  Read the article

• Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

  - by Josh Stodola

  So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

  Read the article

• Grub rescue, unknown file system. Can't boot into Windows 7

  - by Sam J

  So, I'm confused, so I'm also going to use this question to get clarification and fix my computer. So, some background: I had Windows 7 on a 1 TB HDD and decided to partition my hard drive into two ~500 GB, one for Windows 7 and one for Ubuntu or whatever flavour I desired (like a sandbox partition...) I installed Ubuntu but the installation had issues so I decided to uninstall. Note before uninstallation I had to press f12 when I turned on to boot from my primary HDD, then choose what OS I wanted to use. Undesirable, but it worked. Anyway, after I decided to uninstall Ubuntu I went into Windows 7 Start Computer Manage and deleted the EXT4 filesystem (Ubuntu parition) giving me 4xx GB of free space. However when I restarted Windows 7, I am now unable to boot Windows. When I DON'T hit f12, I see a blank screen with a flashing underscore. When I DO hit f12, I choose my primary HDD, and then I get a GRUB error: Unknown filesystem: grub rescue _ Something I'm unclear of: GRUB boots linux partitions, right? What boots Windows? Is GRUB "overwriting" the Windows bootloader? How can I completely get Windows back to normal? (IE, It boots automatically without hitting f12.) Thanks for any help, I'm on a live CD version of Ubuntu right now until I can get back on Windows.

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• I just got a virus 6 mins ago, how? Situation.

  - by acidzombie24

  -Edit- for the people who say it isn't a virus. Norton does detect it as a virus, an icon was placed on my system tray and rkpg.exe is in my C: which was placed 6 min ago around the time my computer rebooted on its own causing me to lose data :@. Situation I on Windows XP, behind a Linksys router, I don't have DMZ on so nothing should be connecting to me. I had Firefox, MSN and Visual Studio opened. With C# I programmed a quick application to scan some pages with Internet Explorer. The site it was scanning was deviantART (which is pretty trustworthy), I doubt any banners there would hold a virus. I went to a suspicious site called freetxt.com but that was on Firefox and it didn't load the site. With an extra check I ping it and got this message "Ping request could not find host freetxt.com." The virus seems to be called braviax. Right now it brought up a message saying my computer may be infected? How on earth did it get in? I don't have uTorrent installed or any torrent or p2p applications. Nothing is installed on my computer that I haven't installed before and I know the exact time it installed because I see rkpg.exe on my C drive and my computer restarted on its own around the same time. For the previous 30 minutes actually the previous hour all I did was talk on MSN, not click any links (I went to freetxt on my own) and had that Internet Explorer thing running (which I programmed). How did it get in? I really doubt it came from a banner on deviantART and installed when I loaded the page with the webbrowser-control so something else may have happened? Is there any system defaults I should turn off? I have remote assistance off but even if it was on I shouldn't be infected due to the router not forwarding any ports?

  Read the article

• What could cause Windows 7 to hang whenever I install something?

  - by Larsenal

  I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

  Read the article

• Best SSD tweaks for Windows 7

  - by Nick Berardi

  I have seen many articles about tweaking an SSD, but many of them seem outdated, or too broad (read all Windows XP, Vista, and Windows 7 general tweaks). And I know that Windows 7 has been specifically tweaked for SSD by the Windows team, so I don't want to do something that was written for Windows XP in mind and end up circumventing something the Windows team has specifically designed in to Windows 7. So my question is what are the best SSD tweaks for Windows 7 that you have found to get the performance out of your drive? I hope to make a comprehensive list in the answers below so there won't be so much disinformation in the forums about what to do and what not to do. Here are a few that I see posted up on the forums alot, and some questions to get the discussion started: Disabling Superfetch. Yes or No Disabling Page File or limiting it to a really small size such as 500 MB. Disabling Indexing. Yes or No Disabling Defragmenting. Yes or No What are your thoughts do you have any that have worked for you? When providing an answer please do your best to back it up with a reason and possibly some documentation from MSDN, TechNet, or another credible source.

  Read the article

< Previous Page | 611 612 613 614 615 616 617 618 619 620 621 622  | Next Page >