Search Results

Search found 22281 results on 892 pages for 'password management'.

Page 615/892 | < Previous Page | 611 612 613 614 615 616 617 618 619 620 621 622  | Next Page >

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• The Software Update tool shows already installed updates

  - by Gilead

  The Software Update tool shows already installed updates. I already installed them a few times, clicking either the 'Update All' button or the indivisual 'Update' buttons. The apps are: Keynote, Numbers, Pages, Skitch, Evernote, Fotor. 'Check for unfinished downloads' reports all downloads have finished. Signing out and back in and reloading didn't help. $ sudo softwareupdate -ia Password: Software Update Tool Copyright 2002-2012 Apple Inc. Finding available software No updates are available. Googling didn't help. How can I fix the GUI tool so it updates its status? OSX 10.9.3

  Read the article

• Windows Home Server Passwords Do Not Match [closed]

  - by Ben Fulton

  I have a Windows Home Server that chunks along just fine most of the time. I've never bothered to put it on a GPS and so it's vulnerable to power outages that happen a few times a year. This most recent time, it came back and seemed to be fine, but whenever I try to access a shared folder I get "Passwords do not match". They matched before the power went out, and I couldn't update the WHS password since I apparently didn't know the old one. How do I fix this?

  Read the article

• Battery notification always showing 'xx% remaining' with Windows 7 on an acer Aspire 5590

  - by dindeman

  My battery level always shows up as something like 55% remaining or 63% remaining ...etc despite that it is in fact charging. Additionally it doesn't go any further than 80% remaining even if I keep it in charge forever. This leads me to a side annoying effect which is that I cannot proceed to install Windows 7 Service Pack 1 as its installer requires the laptop to be plugged with a power cord. My laptop is plugged with the power cord but because of the above issue (it doesn't display anything else than the xx% remaining) Windows thinks that the laptop is using its battery and that the power cord is disconnected. I have installed the original acer ePower Management tool that let you configure the power scheme... etc, I was hoping that this would help me circumvent the 80% issue but it doesn't.

  Read the article

• squid ip based authentication

  - by Ian R.

  I have 10 ip's on a VPS and squid3 installed. I want to lease all of them to 10 co-workers. The authentication should be ip-based. Basically I want to allow only their home ip address (not internal - we're not on a network) to connect to my squid. I would also like to offer them a dedicated ip from my outgoing addresses. I managed to get it working using username/password based authentication but some software do not support that feature so I would like to switch to this limit if possible. Any guidance/sample acl's?

  Read the article

• Is there an encrypted write-only file system for Linux?

  - by Grumbel

  I am searching for an encrypted file system for Linux that can be mounted in a write-only mode, by that I mean you should be able to write/append files, but not be able to read the files you have written. Access to the files should only be given when the filesystem is mounted via a password. The purpose of this is to write log files and such, without having the log files themselves be accessible. Does such a thing exist on Linux? Or if not, what would be the best alternative to create encrypted log files? My current workaround consists of simply piping the data through gpg --encrypt, which works, but is very cumbersome, as you can't get easy access to the file system as a whole, you have to pipe each file through gpg --decrypt manually.

  Read the article

• Getting Steam.exe to run through a http proxy

  - by Kryptonite

  I'm sitting behind an http proxy which Steam refuses to go through. Trying Proxifier to fix the solution rendered an error about having to use an https proxy, though research shows that it shouldn't need one. Is it possible to make a target parameter in a shortcut? ie. "C:\Program Files\Steam\Steam.exe" --http-proxy=myusername:mypassword@SERVERNAME:8080 I have the server name and port number, though I'm yet to understand the relevance of 'myusername:mypassword', or infact which username and password these instructions were referring to. Of course, if a target parameter wouldn't work, would there be another way to get Steam to work?

  Read the article

• Data loss with roaming profiles on login on two different computers

  - by Jurriaan Pijpers

  We have a Windows server 2003 system with Active Directory and all of our users have roaming profiles. One of the users let someone login with his username and password on a different computer (2) while he was working on his own computer (1). Now when this user logs in on his own computer (1), the profile that is loaded is one that dates back many months (i think from the last time he logged on to computer 2). My suspicion is that the profile that was cached on computer 2 from many months back when this user last logged on on this computer, on logoff, synced over the newer profile on the server. so that now when he logs in, he gets this old profile. Now my questions: Is it possible to retrieve te newer profile? Is it possible to keep this from happening in the future?

  Read the article

• How does Amazon ec2-user get its sudo rights

  - by Johan

  I am looking for where the default Amazon AMI linux image sets up the privileges for the default ec2-user account. After logging in with this account I can use sudo successfully. Checking via the sudoers file, which I open by running visudo (with no other options) I see a few default settings and permissions for root ALL ALL So ... Where is the permissions for ec2-user assigned? I have not yet tried to add a new permission but ultimately I want to resign ec2-user for systems management tasks and use a non-full root user for administering the applications (stop and start mysql, httpd, edit apache's vhost files, and upload / edit web content under the web root)

  Read the article

• Can't ssh from Ubuntu to RHEL or CentOS

  - by Alex N

  I am trying to setup publickey based authenitcation for 2 different boxes. One RHEL another on e is CentOS. I am having same issue with both where ssh fails and falls back to password based authentication. Error that seems to be causing this is quite obscure: debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found Both boxes are completely unrelated. I have my public key in .ssh/authorized_keys file on both boxes, all permissions are checked and good(700 for .ssh and 600 for internals) I have bunch of other servers that are running on various flavors(Gentoo, Fedora, FreeBSD etc.) and publickey ssh works just fine, but CentOS and RHEL giving me this for some reason :( Anyone experienced this before? I am not even sure how to further analyze this issue :(

  Read the article

• Running a webserver behind a firewall, is it secure?

  - by i.am.intern

  Currently we have a Linux-based firewall which NAT-ing our public IP address to give internet access to our staff's PCs and a Windows Server 2003 for internal filesharing. I want to host Redmine/SVN (a bugtracker) internally behind this firewall using a Linux server. This webserver will be accessed by our clients externally so they can post bug reports. This means that I have to open port 80 & 22 at the firewall to give access to the webserver and me to SSH it from home. However, let's say I'm using password-based SSH for the webserver and somebody cracked it. Does that mean the cracker could ping and access other servers and PCs in the network?

  Read the article

• How to make a non-root user to use chown for any user group files?

  - by user1877716

  I would like to make a user super powerful, with almost all root rights but unable to touch a the root user (to change the password of the root). My goal is to user "B" to manage my web server. The problem is user B need to able to run the chown and chmod commands on some files belonging to other users. I tried to put B in root group or use visudo, but it's not enough. I'm working an Centos 6 system. If some body have ideas!

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• Using command line to connect to a wireless network with an http login

  - by Shane

  I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

  Read the article

• Network Block Device (NBD) clients for Windows or similar solutions

  - by przemoc

  Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

  Read the article

• Change ownership of directory and all contents to a new user from root.

  - by Andrew Fashion

  I created a website under /var/www/html/ all under root, all images, files, .htacess, directories, etc... I uploaded and configured everything as root. I want to make it it's own username/password so it's not owned by root. I currently do not have the user account made either, I want to also setup FTP for the user account. There is also about 30GB of images in the folder as well. How can I go about changing all of this? I am running CentOS 5.5 64 bit. Thank you!

  Read the article

• Gitosis installation of public key not working...

  - by user29600

  I've been following this tutorial to install and setup git on Ubuntu Server 10.04 using Windows 7 as a client. However, after finally figuring out how it works (executed gitosis-init a bunch of times on the wrong key), I copied the id_rsa.pub file over to the server in /tmp folder and ran it again. Unfortunately it still doesn't work and when I execute git clone [email protected]:gitosis-admin.git it asks for gitosis's password rather than the RSA Passphrase. I'm assuming is the same problem this guy is having here... however, after following his instructions: Purge git-core and gitosis and manually remove the /srv/gitosis folder and following the instructions again (with the proper id_rsa.pub file this time), I'm still having the same issue. Anyone know what I'm doing wrong? Is there any way to probe for more information that might help in solving this?

  Read the article

• sudo access for desktop actions in Gnome/KDE?

  - by Jakobud

  I feel kinda silly asking this question. I'm using CentOS 5.4 and KDE. I downloaded an archive and I want to drag/drop the contents into a folder that I need root access to write to. I can obviously go into terminal and sudo blah blah. But how do I get sudo access for desktop procedures? Like for simple dragging and dropping of files? KDE just tells me that I don't have permission to do that, but doesn't give me the option of entering the root password or sudo.

  Read the article

• Simplest vpn server for linux

  - by Ian R.

  I'm supposed to setup a vpn server on our linux machine for some of our employees who travel a lot. I have 10 ip's on that server so I'm looking into a simple software (not openvpn which is a hell to digest). The software should be able to allow connections from any os type (linux, mac, windows). It should also be able to allow connections via username/password. I would like to assign 1 ip to each client. Any ideas, names?

  Read the article

• Root access amazon ec2

  - by mazzzzz

  Hey guys, I am very new to linux, and amazon-ec2. I wanted to put a quick server. For some reason, when I sign in with my key pair, it prompts me for a username, I input ec2-user, and I'm in. The problem is that I don't have root access (and can't find the root password). I need to install screen to run the server in the background, and also create a new user, that doesn't have root, to run the server. Neither of which I can do without root.. Any help? Edit: I am using Basic 32-bit Amazon Linux AMI 2010.11.1 Beta as the 'AMI'. Thanks, Max

  Read the article

• Remote desktop Client versus Web based access to reports and limited data entry

  - by Voyager

  We have a requirement from management to give limited access of our Application to Distributors \ Dealers to look at their account statements in our books of account, enter their purchase requirements (sales order for us). We have given a few of them the RDC who connect to our terminal server and access the reports. This involves licensing of TS Client per each distributor. Is it more better, secure and less costly if a web based application is made to only enter the orders and retrive reports like pending orders, ledgers, receivables etc. Also which is more secure as far as database access is concerened...browser based access or RDC access. Please answer.

  Read the article

• Can I get back a disabled account from Microsoft Exchange 2010?

  - by gtaylor85

  We had an employee leave today and I disabled their account. For clarification I right click the user in the Exchange Management Console and clicked "Disable." I got a message that said "Disabling the mailbox will remove the Exchange properties from the Windows user object and mark the mailbox in the database for removal. Are you sure you want to disable 'Users Name'? I clicked "yes" and not 60 seconds later I was asked to just change the password temporarily. Can I get this account back?

  Read the article

• why need select privileges on *.* to use view?

  - by profy

  I have a problem using view with MySQL server 5.0 (5.0.92) I cannot use view with a user granted like that : GRANT USAGE ON *.* TO 'testuser'@'' IDENTIFIED BY PASSWORD '**********'; GRANT ALL PRIVILEGES ON `testuser`.* TO 'testuser'@''; I can create view, but when I try to select in, I have this messages : ERROR 1356 (HY000): View 'testuser.v' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them I need to "GRANT SELECT ON . TO 'testuser'@''" to make select working on the view. Why ? Do you know a solution to use VIEW's without the select privileges on . ? Thanks a lots for your answers.

  Read the article

• Win7 XP mode install fails with cryptic error

  - by MAW74656

  Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

  Read the article

• How do you know which domain owns the hosting?

  - by BubbleStalker

  For example if I have 1) host adress 2) login 3) password, I am entering by SSH on ruby on rails hosting, then how can i be sured that this hosting belongs to a specific domain? for example how can I know if www.site.com - belongs to some specific hosting to which I have access. I am asking this because I have access to hosting of ruby on rails, and when i modify files, there is no changes, i've tried to use the files "script", "serv", "restart.txt" - by ssh: touch tmp/restart.txt ./serv restart script restart nothing of the above helped...and I don't know what to do, any ideas?

  Read the article

< Previous Page | 611 612 613 614 615 616 617 618 619 620 621 622  | Next Page >