Search Results

Search found 16021 results on 641 pages for 'mr nothing'.

Page 616/641 | < Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >

• Ubuntu cannot access internet, LAN is fine

  - by Kevin Southworth

  I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• OData &ndash; The easiest service I can create: now with updates

  - by Jon Dalberg

  The other day I created a simple NastyWord service exposed via OData. It was read-only and used an in-memory backing store for the words. Today I’ll modify it to use a file instead of a list and I’ll accept new nasty words by implementing IUpdatable directly. The first thing to do is enable the service to accept new entries. This is done at configuration time by adding the “WriteAppend” access rule: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: }   Next I placed a file, NastyWords.txt, in the “App_Data” folder and added a few *choice* words to start. This required one simple change to our NastyWordDataSource.cs file: 1: public NastyWordsDataSource() 2: { 3: UpdateFromSource(); 4: } 5:   6: private void UpdateFromSource() 7: { 8: var words = File.ReadAllLines(pathToFile); 9: NastyWords = (from w in words 10: select new NastyWord { Word = w }).AsQueryable(); 11: }   Nothing too shocking here, just reading each line from the NastyWords.txt file and exposing them. Next, I implemented IUpdatable which comes with a boat-load of methods. We don’t need all of them for now since we are only concerned with allowing new values. Here are the methods we must implement, all the others throw a NotImplementedException: 1: public object CreateResource(string containerName, string fullTypeName) 2: { 3: var nastyWord = new NastyWord(); 4: pendingUpdates.Add(nastyWord); 5: return nastyWord; 6: } 7:   8: public object ResolveResource(object resource) 9: { 10: return resource; 11: } 12:   13: public void SaveChanges() 14: { 15: var intersect = (from w in pendingUpdates 16: select w.Word).Intersect(from n in NastyWords 17: select n.Word); 18:   19: if (intersect.Count() > 0) 20: throw new DataServiceException(500, "duplicate entry"); 21:   22: var lines = from w in pendingUpdates 23: select w.Word; 24:   25: File.AppendAllLines(pathToFile, 26: lines, 27: Encoding.UTF8); 28:   29: pendingUpdates.Clear(); 30:   31: UpdateFromSource(); 32: } 33:   34: public void SetValue(object targetResource, string propertyName, object propertyValue) 35: { 36: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 37: }   I use a simple list to contain the pending updates and only commit them when the “SaveChanges” method is called. Here’s the order these methods are called in our service during an insert: CreateResource – here we just instantiate a new NastyWord and stick a reference to it in our pending updates list. SetValue – this is where the “Word” property of the NastyWord instance is set. SaveChanges – get the list of pending updates, barfing on duplicates, write them to the file and clear our pending list. ResolveResource – the newly created resource will be returned directly here since we aren’t dealing with “handles” to objects but the actual objects themselves. Not too bad, eh? I didn’t find this documented anywhere but a little bit of digging in the OData spec and use of Fiddler made it pretty easy to figure out. Here is some client code which would add a new nasty word: 1: static void Main(string[] args) 2: { 3: var svc = new ServiceReference1.NastyWordsDataSource(new Uri("http://localhost.:60921/NastyWords.svc")); 4: svc.AddToNastyWords(new ServiceReference1.NastyWord() { Word = "shat" }); 5:   6: svc.SaveChanges(); 7: }   Here’s all of the code so far for to implement the service: 1: using System; 2: using System.Collections.Generic; 3: using System.Data.Services; 4: using System.Data.Services.Common; 5: using System.Linq; 6: using System.ServiceModel.Web; 7: using System.Web; 8: using System.IO; 9: using System.Text; 10:   11: namespace ONasty 12: { 13: [DataServiceKey("Word")] 14: public class NastyWord 15: { 16: public string Word { get; set; } 17: } 18:   19: public class NastyWordsDataSource : IUpdatable 20: { 21: private List<NastyWord> pendingUpdates = new List<NastyWord>(); 22: private string pathToFile = @"path to your\App_Data\NastyWords.txt"; 23:   24: public NastyWordsDataSource() 25: { 26: UpdateFromSource(); 27: } 28:   29: private void UpdateFromSource() 30: { 31: var words = File.ReadAllLines(pathToFile); 32: NastyWords = (from w in words 33: select new NastyWord { Word = w }).AsQueryable(); 34: } 35:   36: public IQueryable<NastyWord> NastyWords { get; private set; } 37:   38: public void AddReferenceToCollection(object targetResource, string propertyName, object resourceToBeAdded) 39: { 40: throw new NotImplementedException(); 41: } 42:   43: public void ClearChanges() 44: { 45: pendingUpdates.Clear(); 46: } 47:   48: public object CreateResource(string containerName, string fullTypeName) 49: { 50: var nastyWord = new NastyWord(); 51: pendingUpdates.Add(nastyWord); 52: return nastyWord; 53: } 54:   55: public void DeleteResource(object targetResource) 56: { 57: throw new NotImplementedException(); 58: } 59:   60: public object GetResource(IQueryable query, string fullTypeName) 61: { 62: throw new NotImplementedException(); 63: } 64:   65: public object GetValue(object targetResource, string propertyName) 66: { 67: throw new NotImplementedException(); 68: } 69:   70: public void RemoveReferenceFromCollection(object targetResource, string propertyName, object resourceToBeRemoved) 71: { 72: throw new NotImplementedException(); 73: } 74:   75: public object ResetResource(object resource) 76: { 77: throw new NotImplementedException(); 78: } 79:   80: public object ResolveResource(object resource) 81: { 82: return resource; 83: } 84:   85: public void SaveChanges() 86: { 87: var intersect = (from w in pendingUpdates 88: select w.Word).Intersect(from n in NastyWords 89: select n.Word); 90:   91: if (intersect.Count() > 0) 92: throw new DataServiceException(500, "duplicate entry"); 93:   94: var lines = from w in pendingUpdates 95: select w.Word; 96:   97: File.AppendAllLines(pathToFile, 98: lines, 99: Encoding.UTF8); 100:   101: pendingUpdates.Clear(); 102:   103: UpdateFromSource(); 104: } 105:   106: public void SetReference(object targetResource, string propertyName, object propertyValue) 107: { 108: throw new NotImplementedException(); 109: } 110:   111: public void SetValue(object targetResource, string propertyName, object propertyValue) 112: { 113: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 114: } 115: } 116:   117: public class NastyWords : DataService<NastyWordsDataSource> 118: { 119: // This method is called only once to initialize service-wide policies. 120: public static void InitializeService(DataServiceConfiguration config) 121: { 122: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 123: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 124: } 125: } 126: } Next time we’ll allow removing nasty words. Enjoy!

  Read the article

• ANTS CLR and Memory Profiler In Depth Review (Part 2 of 2 &ndash; Memory Profiler)

  - by ToStringTheory

  One of the things that people might not know about me, is my obsession to make my code as efficient as possible. Many people might not realize how much of a task or undertaking that this might be, but it is surely a task as monumental as climbing Mount Everest, except this time it is a challenge for the mind… In trying to make code efficient, there are many different factors that play a part – size of project or solution, tiers, language used, experience and training of the programmer, technologies used, maintainability of the code – the list can go on for quite some time. I spend quite a bit of time when developing trying to determine what is the best way to implement a feature to accomplish the efficiency that I look to achieve. One program that I have recently come to learn about – Red Gate ANTS Performance (CLR) and Memory profiler gives me tools to accomplish that job more efficiently as well. In this review, I am going to cover some of the features of the ANTS memory profiler set by compiling some hideous example code to test against. Notice As a member of the Geeks With Blogs Influencers program, one of the perks is the ability to review products, in exchange for a free license to the program. I have not let this affect my opinions of the product in any way, and Red Gate nor Geeks With Blogs has tried to influence my opinion regarding this product in any way. Introduction – Part 2 In my last post, I reviewed the feature packed Red Gate ANTS Performance Profiler.  Separate from the Red Gate Performance Profiler is the Red Gate ANTS Memory Profiler – a simple, easy to use utility for checking how your application is handling memory management…  A tool that I wish I had had many times in the past.  This post will be focusing on the ANTS Memory Profiler and its tool set. The memory profiler has a large assortment of features just like the Performance Profiler, with the new session looking nearly exactly alike: ANTS Memory Profiler Memory profiling is not something that I have to do very often…  In the past, the few cases I’ve had to find a memory leak in an application I have usually just had to trace the code of the operations being performed to look for oddities…  Sadly, I have come across more undisposed/non-using’ed IDisposable objects, usually from ADO.Net than I would like to ever see.  Support is not fun, however using ANTS Memory Profiler makes this task easier.  For this round of testing, I am going to use the same code from my previous example, using the WPF application. This time, I will choose the ‘Profile Memory’ option from the ANTS menu in Visual Studio, which launches the solution in its currently configured state/start-up project, and then launches the ANTS Memory Profiler to help.  It prepopulates all of the fields with the current project information, and all I have to do is select the ‘Start Profiling’ option. When the window comes up, it is actually quite barren, just giving ideas on how to work the profiler.  You start by getting to the point in your application that you want to profile, and then taking a ‘Memory Snapshot’.  This performs a full garbage collection, and snapshots the managed heap.  Using the same WPF app as before, I will go ahead and take a snapshot now. As you can see, ANTS is already giving me lots of information regarding the snapshot, however this is just a snapshot.  The whole point of the profiler is to perform an action, usually one where a memory problem is being noticed, and then take another snapshot and perform a diff between them to see what has changed.  I am going to go ahead and generate 5000 primes, and then take another snapshot: As you can see, ANTS is already giving me a lot of new information about this snapshot compared to the last.  Information such as difference in memory usage, fragmentation, class usage, etc…  If you take more snapshots, you can use the dropdown at the top to set your actual comparison snapshots. If you beneath the timeline, you will see a breadcrumb trail showing how best to approach profiling memory using ANTS.  When you first do the comparison, you start on the Summary screen.  You can either use the charts at the bottom, or switch to the class list screen to get to the next step.  Here is the class list screen: As you can see, it lists information about all of the instances between the snapshots, as well as at the bottom giving you a way to filter by telling ANTS what your problem is.  I am going to go ahead and select the Int16[] to look at the Instance Categorizer Using the instance categorizer, you can travel backwards to see where all of the instances are coming from.  It may be hard to see in this image, but hopefully the lightbox (click on it) will help: I can see that all of these instances are rooted to the application through the UI TextBlock control.  This image will probably be even harder to see, however using the ‘Instance Retention Graph’, you can trace an objects memory inheritance up the chain to see its roots as well.  This is a simple example, as this is simply a known element.  Usually you would be profiling an actual problem, and comparing those differences.  I know in the past, I have spotted a problem where a new context was created per page load, and it was rooted into the application through an event.  As the application began to grow, performance and reliability problems started to emerge.  A tool like this would have been a great way to identify the problem quickly. Overview Overall, I think that the Red Gate ANTS Memory Profiler is a great utility for debugging those pesky leaks.  3 Biggest Pros: Easy to use interface with lots of options for configuring profiling session Intuitive and helpful interface for drilling down from summary, to instance, to root graphs ANTS provides an API for controlling the profiler. Not many options, but still helpful. 2 Biggest Cons: Inability to automatically snapshot the memory by interval Lack of complete integration with Visual Studio via an extension panel Ratings Ease of Use (9/10) – I really do believe that they have brought simplicity to the once difficult task of memory profiling.  I especially liked how it stepped you further into the drilldown by directing you towards the best options. Effectiveness (10/10) – I believe that the profiler does EXACTLY what it purports to do.  Features (7/10) – A really great set of features all around in the application, however, I would like to see some ability for automatically triggering snapshots based on intervals or framework level items such as events. Customer Service (10/10) – My entire experience with Red Gate personnel has been nothing but good.  their people are friendly, helpful, and happy! UI / UX (9/10) – The interface is very easy to get around, and all of the options are easy to find.  With a little bit of poking around, you’ll be optimizing Hello World in no time flat! Overall (9/10) – Overall, I am happy with the Memory Profiler and its features, as well as with the service I received when working with the Red Gate personnel.  Thank you for reading up to here, or skipping ahead – I told you it would be shorter!  Please, if you do try the product, drop me a message and let me know what you think!  I would love to hear any opinions you may have on the product. Code Feel free to download the code I used above – download via DropBox

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• Web browsing is fast, but downloads are slow

  - by Ricket

  I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

  Read the article

• Why JSF Matters (to You)

  - by reza_rahman

        "Those who have knowledge, don’t predict. Those who predict, don’t have knowledge."                                                                                                    – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

  Read the article

• Project Jigsaw: Late for the train: The Q&A

  - by Mark Reinhold

  I recently proposed, to the Java community in general and to the SE 8 (JSR 337) Expert Group in particular, to defer Project Jigsaw from Java 8 to Java 9. I also proposed to aim explicitly for a regular two-year release cycle going forward. Herewith a summary of the key questions I’ve seen in reaction to these proposals, along with answers. Making the decision Q Has the Java SE 8 Expert Group decided whether to defer the addition of a module system and the modularization of the Platform to Java SE 9? A No, it has not yet decided. Q By when do you expect the EG to make this decision? A In the next month or so. Q How can I make sure my voice is heard? A The EG will consider all relevant input from the wider community. If you have a prominent blog, column, or other communication channel then there’s a good chance that we’ve already seen your opinion. If not, you’re welcome to send it to the Java SE 8 Comments List, which is the EG’s official feedback channel. Q What’s the overall tone of the feedback you’ve received? A The feedback has been about evenly divided as to whether Java 8 should be delayed for Jigsaw, Jigsaw should be deferred to Java 9, or some other, usually less-realistic, option should be taken. Project Jigsaw Q Why is Project Jigsaw taking so long? A Project Jigsaw started at Sun, way back in August 2008. Like many efforts during the final years of Sun, it was not well staffed. Jigsaw initially ran on a shoestring, with just a handful of mostly part-time engineers, so progress was slow. During the integration of Sun into Oracle all work on Jigsaw was halted for a time, but it was eventually resumed after a thorough consideration of the alternatives. Project Jigsaw was really only fully staffed about a year ago, around the time that Java 7 shipped. We’ve added a few more engineers to the team since then, but that can’t make up for the inadequate initial staffing and the time lost during the transition. Q So it’s really just a matter of staffing limitations and corporate-integration distractions? A Aside from these difficulties, the other main factor in the duration of the project is the sheer technical difficulty of modularizing the JDK. Q Why is modularizing the JDK so hard? A There are two main reasons. The first is that the JDK code base is deeply interconnected at both the API and the implementation levels, having been built over many years primarily in the style of a monolithic software system. We’ve spent considerable effort eliminating or at least simplifying as many API and implementation dependences as possible, so that both the Platform and its implementations can be presented as a coherent set of interdependent modules, but some particularly thorny cases remain. Q What’s the second reason? A We want to maintain as much compatibility with prior releases as possible, most especially for existing classpath-based applications but also, to the extent feasible, for applications composed of modules. Q Is modularizing the JDK even necessary? Can’t you just put it in one big module? A Modularizing the JDK, and more specifically modularizing the Java SE Platform, will enable standard yet flexible Java runtime configurations scaling from large servers down to small embedded devices. In the long term it will enable the convergence of Java SE with the higher-end Java ME Platforms. Q Is Project Jigsaw just about modularizing the JDK? A As originally conceived, Project Jigsaw was indeed focused primarily upon modularizing the JDK. The growing demand for a truly standard module system for the Java Platform, which could be used not just for the Platform itself but also for libraries and applications built on top of it, later motivated expanding the scope of the effort. Q As a developer, why should I care about Project Jigsaw? A The introduction of a modular Java Platform will, in the long term, fundamentally change the way that Java implementations, libraries, frameworks, tools, and applications are designed, built, and deployed. Q How much progress has Project Jigsaw made? A We’ve actually made a lot of progress. Much of the core functionality of the module system has been prototyped and works at both compile time and run time. We’ve extended the Java programming language with module declarations, worked out a structure for modular source trees and corresponding compiled-class trees, and implemented these features in javac. We’ve defined an efficient module-file format, extended the JVM to bootstrap a modular JRE, and designed and implemented a preliminary API. We’ve used the module system to make a good first cut at dividing the JDK and the Java SE API into a coherent set of modules. Among other things, we’re currently working to retrofit the java.util.ServiceLoader API to support modular services. Q I want to help! How can I get involved? A Check out the project page, read the draft requirements and design overview documents, download the latest prototype build, and play with it. You can tell us what you think, and follow the rest of our work in real time, on the jigsaw-dev list. The Java Platform Module System JSR Q What’s the relationship between Project Jigsaw and the eventual Java Platform Module System JSR? A At a high level, Project Jigsaw has two phases. In the first phase we’re exploring an approach to modularity that’s markedly different from that of existing Java modularity solutions. We’ve assumed that we can change the Java programming language, the virtual machine, and the APIs. Doing so enables a design which can strongly enforce module boundaries in all program phases, from compilation to deployment to execution. That, in turn, leads to better usability, diagnosability, security, and performance. The ultimate goal of the first phase is produce a working prototype which can inform the work of the Module-System JSR EG. Q What will happen in the second phase of Project Jigsaw? A The second phase will produce the reference implementation of the specification created by the Module-System JSR EG. The EG might ultimately choose an entirely different approach than the one we’re exploring now. If and when that happens then Project Jigsaw will change course as necessary, but either way I think that the end result will be better for having been informed by our current work. Maven & OSGi Q Why not just use Maven? A Maven is a software project management and comprehension tool. As such it can be seen as a kind of build-time module system but, by its nature, it does nothing to support modularity at run time. Q Why not just adopt OSGi? A OSGi is a rich dynamic component system which includes not just a module system but also a life-cycle model and a dynamic service registry. The latter two facilities are useful to some kinds of sophisticated applications, but I don’t think they’re of wide enough interest to be standardized as part of the Java SE Platform. Q Okay, then why not just adopt the module layer of OSGi? A The OSGi module layer is not operative at compile time; it only addresses modularity during packaging, deployment, and execution. As it stands, moreover, it’s useful for library and application modules but, since it’s built strictly on top of the Java SE Platform, it can’t be used to modularize the Platform itself. Q If Maven addresses modularity at build time, and the OSGi module layer addresses modularity during deployment and at run time, then why not just use the two together, as many developers already do? A The combination of Maven and OSGi is certainly very useful in practice today. These systems have, however, been built on top of the existing Java platform; they have not been able to change the platform itself. This means, among other things, that module boundaries are weakly enforced, if at all, which makes it difficult to diagnose configuration errors and impossible to run untrusted code securely. The prototype Jigsaw module system, by contrast, aims to define a platform-level solution which extends both the language and the JVM in order to enforce module boundaries strongly and uniformly in all program phases. Q If the EG chooses an approach like the one currently being taken in the Jigsaw prototype, will Maven and OSGi be made obsolete? A No, not at all! No matter what approach is taken, to ensure wide adoption it’s essential that the standard Java Platform Module System interact well with Maven. Applications that depend upon the sophisticated features of OSGi will no doubt continue to use OSGi, so it’s critical that implementations of OSGi be able to run on top of the Java module system and, if suitably modified, support OSGi bundles that depend upon Java modules. Ideas for how to do that are currently being explored in Project Penrose. Java 8 & Java 9 Q Without Jigsaw, won’t Java 8 be a pretty boring release? A No, far from it! It’s still slated to include the widely-anticipated Project Lambda (JSR 335), work on which has been going very well, along with the new Date/Time API (JSR 310), Type Annotations (JSR 308), and a set of smaller features already in progress. Q Won’t deferring Jigsaw to Java 9 delay the eventual convergence of the higher-end Java ME Platforms with Java SE? A It will slow that transition, but it will not stop it. To allow progress toward that convergence to be made with Java 8 I’ve suggested to the Java SE 8 EG that we consider specifying a small number of Profiles which would allow compact configurations of the SE Platform to be built and deployed. Q If Jigsaw is deferred to Java 9, would the Oracle engineers currently working on it be reassigned to other Java 8 features and then return to working on Jigsaw again after Java 8 ships? A No, these engineers would continue to work primarily on Jigsaw from now until Java 9 ships. Q Why not drop Lambda and finish Jigsaw instead? A Even if the engineers currently working on Lambda could instantly switch over to Jigsaw and immediately become productive—which of course they can’t—there are less than nine months remaining in the Java 8 schedule for work on major features. That’s just not enough time for the broad review, testing, and feedback which such a fundamental change to the Java Platform requires. Q Why not ship the module system in Java 8, and then modularize the platform in Java 9? A If we deliver a module system in one release but don’t use it to modularize the JDK until some later release then we run a big risk of getting something fundamentally wrong. If that happens then we’d have to fix it in the later release, and fixing fundamental design flaws after the fact almost always leads to a poor end result. Q Why not ship Jigsaw in an 8.5 release, less than two years after 8? Or why not just ship a new release every year, rather than every other year? A Many more developers work on the JDK today than a couple of years ago, both because Oracle has dramatically increased its own investment and because other organizations and individuals have joined the OpenJDK Community. Collectively we don’t, however, have the bandwidth required to ship and then provide long-term support for a big JDK release more frequently than about every other year. Q What’s the feedback been on the two-year release-cycle proposal? A For just about every comment that we should release more frequently, so that new features are available sooner, there’s been another asking for an even slower release cycle so that large teams of enterprise developers who ship mission-critical applications have a chance to migrate at a comfortable pace.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 4: Application Development Considerations

  - by Tim Murphy

  This is the final part in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Application Development Considerations Now we get to the actual building of your solutions.  What are the skills and resources that will be needed in order to develop a smartphone application in the enterprise? Language Knowledge One of the first things you need to consider when you are deciding which platform language do you either have the most in house skill base or can you easily acquire.  If you already have developers who know Java or C# you may want to use either Android or Windows Phone.  You should also take into consideration the market availability of developers.  If your key developer leaves how easy is it to find a knowledgeable replacement? A second consideration when it comes to programming languages is the qualities exposed by the languages of a particular platform.  How well does that development language and its associated frameworks support things like security and access to the features of the smartphone hardware?  This will play into your overall cost of ownership if you have to create this infrastructure on your own. Manage Limited Resources Everything is limited on a smartphone: battery, memory, processing power, network bandwidth.  When developing your applications you will have to keep your footprint as small as possible in every way.  This means not running unnecessary processes in the background that will drain the battery or pulling more data over the airwaves than you have to.  You also want to keep your on device in as compact a format as possible. Mobile Design Patterns There are a number of design patterns that have either come to life because of smartphone development or have been adapted for this use.  The main pattern in the Windows Phone environment is the MVVM (Model-View-View-Model).  This is great for overall application structure and separation of concerns.  The fun part is trying to keep that separation as pure as possible.  Many of the other patterns may or may not have strict definitions, but some that you need to be concerned with are push notification, asynchronous communication and offline data storage. Real estate is limited on smartphones and even tablets. You are also limited in the type of controls that can be represented in the UI. This means rethinking how you modularize your application. Typing is also much harder to do so you want to reduce this as much as possible.  This leads to UI patterns.  While not what we would traditionally think of as design patterns the guidance each platform has for UI design is critical to the success of your application.  If user find the application difficult navigate they will not use it. Development Process Because of the differences in development tools required, test devices and certification and deployment processes your teams will need to learn new way of working together.  This will include the need to integrate service contracts of back-end systems with mobile applications.  You will also want to make sure that you present consistency across different access points to corporate data.  Your web site may have more functionality than your smartphone application, but it should have a consistent core set of functionality.  This all requires greater communication between sub-teams of your developers. Testing Process Testing of smartphone apps has a lot more to do with what happens when you lose connectivity or if the user navigates away from your application. There are a lot more opportunities for the user or the device to perform disruptive acts.  This should be your main testing concentration aside from the main business requirements.  You will need to do things like setting the phone to airplane mode and seeing what the application does in order to weed out any gaps in your handling communication interruptions. Need For Outside Experts Since this is a development area that is new to most companies the need for experts is a lot greater. Whether these are consultants, vendor representatives or just development community forums you will need to establish expert contacts. Nothing is more dangerous for your project timelines than a lack of knowledge.  Make sure you know who to call to avoid lengthy delays in your project because of knowledge gaps. Security Security has to be a major concern for enterprise applications. You aren't dealing with just someone's game standings. You are dealing with a companies intellectual property and competitive advantage. As such you need to start by limiting access to the application itself.  Once the user is in the app you need to ensure that the data is secure at all times.  This includes both local storage and across the wire.  This means if a platform doesn’t natively support encryption for these functions you will need to find alternatives to secure your data.  You also need to keep secret (encryption) keys obfuscated or locked away outside of the application. People can disassemble the code otherwise and break your encryption. Offline Capabilities As we discussed earlier one your biggest concerns is not having connectivity.  Because of this a good portion of your code may be dedicated to handling loss of connection and reconnection situations.  What do you do if you lose the network?  Back up all your transactions and store of any supporting data so that operations can continue off line. In order to support this you will need to determine the available flat file or local data base capabilities of the platform.  Any failed transactions will need to support a retry mechanism whether it is automatic or user initiated.  This also includes your services since they will need to be able to roll back partially completed transactions.  What ever you do, don’t ignore this area when you are designing your system. Deployment Each platform has different deployment capabilities. Some are more suited to enterprise situations than others. Apple's approach is probably the most mature at the moment. Prior to the current generation of smartphone platforms it would have been Windows CE. Windows Phone 7 has the limitation that the app has to be distributed through the same network as public facing applications. You mark them as private which means that they are only accessible by a direct URL. Unfortunately this does not make them undiscoverable (although it is very difficult). This will change with Windows Phone 8 where companies will be able to certify their own applications and distribute them.  Given this Windows Phone applications need to be more diligent with application access in order to keep them restricted to the company's employees. My understanding of the Android deployment schemes is that it is much less standardized then either iOS or Windows Phone. Someone would have to confirm or deny that for me though since I have not yet put the time into researching this platform further. Given my limited exposure to the iOS and Android platforms I have not been able to confirm this, but there are varying degrees of user involvement to install and keep applications updated. At one extreme the user just goes to a website to do the install and in other case they may need to download files and perform steps to install them. Future Bluetooth Today we use Bluetooth for keyboards, mice and headsets.  In the future it could be used to interrogate car computers or manufacturing systems or possibly retail machines by service techs.  This would open smartphones to greater use as a almost a Star Trek Tricorder.  You would get you all your data as well as being able to use it as a universal remote for just about any device or machine. Better corporation controlled deployment At least in the Windows Phone world the upcoming release of Windows Phone 8 will include a private certification and deployment option that is currently not available with Windows Phone 7 (Mango). We currently have to run the apps through the Marketplace certification process and use a targeted distribution method. Platform independent approaches HTML5 and JavaScript with Web Service has become a popular topic lately for not only creating flexible web site, but also creating cross platform mobile applications.  I’m not yet convinced that this lowest common denominator approach is viable in most cases, but it does have it’s place and seems to be growing.  Be sure to keep an eye on it. Summary From my perspective enterprise smartphone applications can offer a great competitive advantage to many companies.  They are not cheap to build and should be approached cautiously.  Understand the factors I have outlined in this series, do you due diligence and see if there is a portion of your business that can benefit from the mobile experience. del.icio.us Tags: Architecture,Smartphones,Windows Phone,iOS,Android

  Read the article

• parallel_for_each from amp.h – part 1

  - by Daniel Moth

  This posts assumes that you've read my other C++ AMP posts on index<N> and extent<N>, as well as about the restrict modifier. It also assumes you are familiar with C++ lambdas (if not, follow my links to C++ documentation). Basic structure and parameters Now we are ready for part 1 of the description of the new overload for the concurrency::parallel_for_each function. The basic new parallel_for_each method signature returns void and accepts two parameters: a grid<N> (think of it as an alias to extent) a restrict(direct3d) lambda, whose signature is such that it returns void and accepts an index of the same rank as the grid So it looks something like this (with generous returns for more palatable formatting) assuming we are dealing with a 2-dimensional space: // some_code_A parallel_for_each( g, // g is of type grid<2> [ ](index<2> idx) restrict(direct3d) { // kernel code } ); // some_code_B The parallel_for_each will execute the body of the lambda (which must have the restrict modifier), on the GPU. We also call the lambda body the "kernel". The kernel will be executed multiple times, once per scheduled GPU thread. The only difference in each execution is the value of the index object (aka as the GPU thread ID in this context) that gets passed to your kernel code. The number of GPU threads (and the values of each index) is determined by the grid object you pass, as described next. You know that grid is simply a wrapper on extent. In this context, one way to think about it is that the extent generates a number of index objects. So for the example above, if your grid was setup by some_code_A as follows: extent<2> e(2,3); grid<2> g(e); ...then given that: e.size()==6, e[0]==2, and e[1]=3 ...the six index<2> objects it generates (and hence the values that your lambda would receive) are:    (0,0) (1,0) (0,1) (1,1) (0,2) (1,2) So what the above means is that the lambda body with the algorithm that you wrote will get executed 6 times and the index<2> object you receive each time will have one of the values just listed above (of course, each one will only appear once, the order is indeterminate, and they are likely to call your code at the same exact time). Obviously, in real GPU programming, you'd typically be scheduling thousands if not millions of threads, not just 6. If you've been following along you should be thinking: "that is all fine and makes sense, but what can I do in the kernel since I passed nothing else meaningful to it, and it is not returning any values out to me?" Passing data in and out It is a good question, and in data parallel algorithms indeed you typically want to pass some data in, perform some operation, and then typically return some results out. The way you pass data into the kernel, is by capturing variables in the lambda (again, if you are not familiar with them, follow the links about C++ lambdas), and the way you use data after the kernel is done executing is simply by using those same variables. In the example above, the lambda was written in a fairly useless way with an empty capture list: [ ](index<2> idx) restrict(direct3d), where the empty square brackets means that no variables were captured. If instead I write it like this [&](index<2> idx) restrict(direct3d), then all variables in the some_code_A region are made available to the lambda by reference, but as soon as I try to use any of those variables in the lambda, I will receive a compiler error. This has to do with one of the direct3d restrictions, where only one type can be capture by reference: objects of the new concurrency::array class that I'll introduce in the next post (suffice for now to think of it as a container of data). If I write the lambda line like this [=](index<2> idx) restrict(direct3d), all variables in the some_code_A region are made available to the lambda by value. This works for some types (e.g. an integer), but not for all, as per the restrictions for direct3d. In particular, no useful data classes work except for one new type we introduce with C++ AMP: objects of the new concurrency::array_view class, that I'll introduce in the post after next. Also note that if you capture some variable by value, you could use it as input to your algorithm, but you wouldn’t be able to observe changes to it after the parallel_for_each call (e.g. in some_code_B region since it was passed by value) – the exception to this rule is the array_view since (as we'll see in a future post) it is a wrapper for data, not a container. Finally, for completeness, you can write your lambda, e.g. like this [av, &ar](index<2> idx) restrict(direct3d) where av is a variable of type array_view and ar is a variable of type array - the point being you can be very specific about what variables you capture and how. So it looks like from a large data perspective you can only capture array and array_view objects in the lambda (that is how you pass data to your kernel) and then use the many threads that call your code (each with a unique index) to perform some operation. You can also capture some limited types by value, as input only. When the last thread completes execution of your lambda, the data in the array_view or array are ready to be used in the some_code_B region. We'll talk more about all this in future posts… (a)synchronous Please note that the parallel_for_each executes as if synchronous to the calling code, but in reality, it is asynchronous. I.e. once the parallel_for_each call is made and the kernel has been passed to the runtime, the some_code_B region continues to execute immediately by the CPU thread, while in parallel the kernel is executed by the GPU threads. However, if you try to access the (array or array_view) data that you captured in the lambda in the some_code_B region, your code will block until the results become available. Hence the correct statement: the parallel_for_each is as-if synchronous in terms of visible side-effects, but asynchronous in reality.   That's all for now, we'll revisit the parallel_for_each description, once we introduce properly array and array_view – coming next. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• How to Implement Project Type "Copy", "Move", "Rename", and "Delete"

  - by Geertjan

  You've followed the NetBeans Project Type Tutorial and now you'd like to let the user copy, move, rename, and delete the projects conforming to your project type. When they right-click a project, they should see the relevant menu items and those menu items should provide dialogs for user interaction, followed by event handling code to deal with the current operation. Right now, at the end of the tutorial, the "Copy" and "Delete" menu items are present but disabled, while the "Move" and "Rename" menu items are absent: The NetBeans Project API provides a built-in mechanism out of the box that you can leverage for project-level "Copy", "Move", "Rename", and "Delete" actions. All the functionality is there for you to use, while all that you need to do is a bit of enablement and configuration, which is described below. To get started, read the following from the NetBeans Project API: http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/ActionProvider.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/CopyOperationImplementation.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/MoveOrRenameOperationImplementation.html http://bits.netbeans.org/dev/javadoc/org-netbeans-modules-projectapi/org/netbeans/spi/project/DeleteOperationImplementation.html Now, let's do some work. For each of the menu items we're interested in, we need to do the following: Provide enablement and invocation handling in an ActionProvider implementation. Provide appropriate OperationImplementation classes. Add the new classes to the Project Lookup. Make the Actions visible on the Project Node. Run the application and verify the Actions work as you'd like. Here we go: Create an ActionProvider. Here you specify the Actions that should be supported, the conditions under which they should be enabled, and what should happen when they're invoked, using lots of default code that lets you reuse the functionality provided by the NetBeans Project API: class CustomerActionProvider implements ActionProvider { @Override public String[] getSupportedActions() { return new String[]{ ActionProvider.COMMAND_RENAME, ActionProvider.COMMAND_MOVE, ActionProvider.COMMAND_COPY, ActionProvider.COMMAND_DELETE }; } @Override public void invokeAction(String string, Lookup lkp) throws IllegalArgumentException { if (string.equalsIgnoreCase(ActionProvider.COMMAND_RENAME)) { DefaultProjectOperations.performDefaultRenameOperation( CustomerProject.this, ""); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_MOVE)) { DefaultProjectOperations.performDefaultMoveOperation( CustomerProject.this); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_COPY)) { DefaultProjectOperations.performDefaultCopyOperation( CustomerProject.this); } if (string.equalsIgnoreCase(ActionProvider.COMMAND_DELETE)) { DefaultProjectOperations.performDefaultDeleteOperation( CustomerProject.this); } } @Override public boolean isActionEnabled(String command, Lookup lookup) throws IllegalArgumentException { if ((command.equals(ActionProvider.COMMAND_RENAME))) { return true; } else if ((command.equals(ActionProvider.COMMAND_MOVE))) { return true; } else if ((command.equals(ActionProvider.COMMAND_COPY))) { return true; } else if ((command.equals(ActionProvider.COMMAND_DELETE))) { return true; } return false; } } Importantly, to round off this step, add "new CustomerActionProvider()" to the "getLookup" method of the project. If you were to run the application right now, all the Actions we're interested in would be enabled (if they are visible, as described in step 4 below) but when you invoke any of them you'd get an error message because each of the DefaultProjectOperations above looks in the Lookup of the Project for the presence of an implementation of a class for handling the operation. That's what we're going to do in the next step. Provide Implementations of Project Operations. For each of our operations, the NetBeans Project API lets you implement classes to handle the operation. The dialogs for interacting with the project are provided by the NetBeans project system, but what happens with the folders and files during the operation can be influenced via the operations. Below are the simplest possible implementations, i.e., here we assume we want nothing special to happen. Each of the below needs to be in the Lookup of the Project in order for the operation invocation to succeed. private final class CustomerProjectMoveOrRenameOperation implements MoveOrRenameOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyRenaming() throws IOException { } @Override public void notifyRenamed(String nueName) throws IOException { } @Override public void notifyMoving() throws IOException { } @Override public void notifyMoved(Project original, File originalPath, String nueName) throws IOException { } } private final class CustomerProjectCopyOperation implements CopyOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyCopying() throws IOException { } @Override public void notifyCopied(Project prjct, File file, String string) throws IOException { } } private final class CustomerProjectDeleteOperation implements DeleteOperationImplementation { @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public List<FileObject> getDataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyDeleting() throws IOException { } @Override public void notifyDeleted() throws IOException { } } Also make sure to put the above methods into the Project Lookup. Check the Lookup of the Project. The "getLookup()" method of the project should now include the classes you created above, as shown in bold below: @Override public Lookup getLookup() { if (lkp == null) { lkp = Lookups.fixed(new Object[]{ this, new Info(), new CustomerProjectLogicalView(this), new CustomerCustomizerProvider(this), new CustomerActionProvider(), new CustomerProjectMoveOrRenameOperation(), new CustomerProjectCopyOperation(), new CustomerProjectDeleteOperation(), new ReportsSubprojectProvider(this), }); } return lkp; } Make Actions Visible on the Project Node. The NetBeans Project API gives you a number of CommonProjectActions, including for the actions we're dealing with. Make sure the items in bold below are in the "getActions" method of the project node: @Override public Action[] getActions(boolean arg0) { return new Action[]{ CommonProjectActions.newFileAction(), CommonProjectActions.copyProjectAction(), CommonProjectActions.moveProjectAction(), CommonProjectActions.renameProjectAction(), CommonProjectActions.deleteProjectAction(), CommonProjectActions.customizeProjectAction(), CommonProjectActions.closeProjectAction() }; } Run the Application. When you run the application, you should see this: Let's now try out the various actions: Copy. When you invoke the Copy action, you'll see the dialog below. Provide a new project name and location and then the copy action is performed when the Copy button is clicked below: The message you see above, in red, might not be relevant to your project type. When you right-click the application and choose Branding, you can find the string in the Resource Bundles tab, as shown below: However, note that the message will be shown in red, no matter what the text is, hence you can really only put something like a warning message there. If you have no text at all, it will also look odd.If the project has subprojects, the copy operation will not automatically copy the subprojects. Take a look here and here for similar more complex scenarios. Move. When you invoke the Move action, the dialog below is shown: Rename. The Rename Project dialog below is shown when you invoke the Rename action: I tried it and both the display name and the folder on disk are changed. Delete. When you invoke the Delete action, you'll see this dialog: The checkbox is not checkable, in the default scenario, and when the dialog above is confirmed, the project is simply closed, i.e., the node hierarchy is removed from the application. However, if you truly want to let the user delete the project on disk, pass the Project to the DeleteOperationImplementation and then add the children of the Project you want to delete to the getDataFiles method: private final class CustomerProjectDeleteOperation implements DeleteOperationImplementation { private final CustomerProject project; private CustomerProjectDeleteOperation(CustomerProject project) { this.project = project; } @Override public List<FileObject> getDataFiles() { List<FileObject> files = new ArrayList<FileObject>(); FileObject[] projectChildren = project.getProjectDirectory().getChildren(); for (FileObject fileObject : projectChildren) { addFile(project.getProjectDirectory(), fileObject.getNameExt(), files); } return files; } private void addFile(FileObject projectDirectory, String fileName, List<FileObject> result) { FileObject file = projectDirectory.getFileObject(fileName); if (file != null) { result.add(file); } } @Override public List<FileObject> getMetadataFiles() { return new ArrayList<FileObject>(); } @Override public void notifyDeleting() throws IOException { } @Override public void notifyDeleted() throws IOException { } } Now the user will be able to check the checkbox, causing the method above to be called in the DeleteOperationImplementation: Hope this answers some questions or at least gets the discussion started. Before asking questions about this topic, please take the steps above and only then attempt to apply them to your own scenario. Useful implementations to look at: http://kickjava.com/src/org/netbeans/modules/j2ee/clientproject/AppClientProjectOperations.java.htm https://kenai.com/projects/nbandroid/sources/mercurial/content/project/src/org/netbeans/modules/android/project/AndroidProjectOperations.java

  Read the article

• Windows 7: Search indexing is stuck

  - by Ricket

  When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

  Read the article

• ldirectord ipvsadm not show reals ip and not work wtih pacemaker and corosync

  - by miguer27

  first thanks for your time. I'm having a problem with ldirectord that I can not solve, I comment my situation: I have two nodes with pace maker and corosync and configure somes resources: root@ldap1:/home/mamartin# crm status Last updated: Tue Jun 3 12:58:30 2014 Last change: Tue Jun 3 12:23:47 2014 via cibadmin on ldap1 Stack: openais Current DC: ldap2 - partition with quorum Version: 1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff 2 Nodes configured, 2 expected votes 7 Resources configured. Online: [ ldap1 ldap2 ] Resource Group: IPV_LVS IPV_4 (ocf::heartbeat:IPaddr2): Started ldap1 IPV_6 (ocf::heartbeat:IPv6addr): Started ldap1 lvs (ocf::heartbeat:ldirectord): Started ldap1 Clone Set: clon_IPV_lo [IPV_lo] Started: [ ldap2 ] Stopped: [ IPV_lo:1 ] root@ldap1:/home/mamartin# crm configure show node ldap2 \ attributes standby="off" node ldap1 \ attributes standby="off" primitive IPV-lo_4 ocf:heartbeat:IPaddr \ params ip="192.168.1.10" cidr_netmask="32" nic="lo" \ op monitor interval="5s" primitive IPV-lo_6 ocf:heartbeat:IPv6addrLO \ params ipv6addr="[fc00:1::3]" cidr_netmask="64" \ op monitor interval="5s" primitive IPV_4 ocf:heartbeat:IPaddr2 \ params ip="192.168.1.10" nic="eth0" cidr_netmask="25" lvs_support="true" \ op monitor interval="5s" primitive IPV_6 ocf:heartbeat:IPv6addr \ params ipv6addr="[fc00:1::3]" nic="eth0" cidr_netmask="64" \ op monitor interval="5s" primitive lvs ocf:heartbeat:ldirectord \ params configfile="/etc/ldirectord.cf" \ op monitor interval="20" timeout="10" \ meta target-role="Started" group IPV_LVS IPV_4 IPV_6 lvs group IPV_lo IPV-lo_6 IPV-lo_4 clone clon_IPV_lo IPV_lo \ meta interleave="true" target-role="Started" location cli-prefer-IPV_LVS IPV_LVS \ rule $id="cli-prefer-rule-IPV_LVS" inf: #uname eq ldap1 colocation LVS_no_IPV_lo -inf: clon_IPV_lo IPV_LVS property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1401264327" rsc_defaults $id="rsc-options" \ resource-stickiness="1000" The problem is in the ipvsadm only show a one real IP, when i configured two now, show the ldirector.cf: root@ldap1:/home/mamartin# ipvsadm IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConn TCP ldap-maqueta.cica.es:ldap wrr - ldap2.cica.es:ldap Route 4 0 0 TCP [[fc00:1::3]]:ldap wrr - [[fc00:1::2]]:ldap Route 4 0 0 root@ldap1:/home/mamartin# cat /etc/ldirectord.cf checktimeout=10 checkinterval=2 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=yes #ipv4 virtual=192.168.1.10:389 real=192.168.1.11:389 gate 4 real=192.168.1.12:389 gate 4 scheduler=wrr protocol=tcp checktype=on #ipv6 virtual6=[[fc00:1::3]]:389 real6=[[fc00:1::1]]:389 gate 4 real6=[[fc00:1::2]]:389 gate 4 scheduler=wrr protocol=tcp checkport=389 checktype=on and in the logs I see nothing clear: root@ldap1:/home/mamartin# ldirectord -d /etc/ldirectord.cf start DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.11:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.12:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Checking on: Real servers are added without any checks DEBUG2: Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Destination already exists root@ldap1:/home/mamartin# cat /var/log/ldirectord.log [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.11:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::2]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t [[fc00:1::3]]:389 -r [[fc00:1::2]]:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: [[fc00:1::2]]:389 ([[fc00:1::3]]:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::1]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: [[fc00:1::1]]:389 ([[fc00:1::3]]:389) (Weight set to 4) do not know if this is a bug or a configuration error, can anyone help? Regards.

  Read the article

• Strange Flash AS3 xml Socket behavior

  - by Rnd_d

  I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"> <!-- Policy file for xmlsocket://ep1c.org --> <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

  Read the article

• Nokia Windows Phone 8 App Collection

  - by Tim Murphy

  I recently upgraded to a Nokia Lumia 920.  Along with it came the availability of a number of Nokia developed apps or apps that Nokia has made available from other developers.  Below is a summary of some of the ones that I have used to this point.  There are quite a few of them so I won’t be covering everything that is available. Nokia Maps I am quite pleased with the accuracy of Nokia Maps and not having to tap the screen for each turn any more.  The information on the screen is quite good as well.  The couple of improvements I would like to see are for the voice directions to include which street or exit you need to use and improve the search accuracy.  Bing maps had much better search results in my opinion. Nokia Drive This one really had me confused when I first setup the phone.  I was driving down the road and suddenly I am getting notification tones, but there were no visual notifications on the phone.  It seems that in their infinite wisdom Nokia thinks I don’t know when I am going over the speed limit and need to be told. ESPN I really liked my ESPN app on Windows Phone 7.5, but I am not getting the type of experience I was looking for out of this app.  While it allows me to pick my favorite teams, but there isn’t a pivot page or panorama page that shows a summary of my favorite teams.  I have also found that the live tile don’t update very often.  Over all I am rather disappointed compared app produced by ESPN. Smart Shoot I really need to get the kids to let me use this on.  I like the concept, but I need to spend more time with it.  The idea how running the camera through a continuous shooting mode and then picking the best is something that I have done with my DSLR and am glad to see it available here. Cinemagraph Here is a fun filter.  It doesn’t have the most accurate editing features, but it is fun to stop certain parts of a scene and let other parts move.  As a test I stopped the traffic on the highway and let the traffic on the frontage road flow.  It makes for a fun effect.  If nothing else it could be great for sending prank animations to your friends. YouSendIt I have only briefly touched this application.  What I don’t understand is why it is needed.  Most of the functionality seems to be similar to SkyDrive and it gives you less storage.  They only feature that seems to differentiate the app is the signature capability. Creative Studio This app has some nice quick edits, but it is not very comprehensive.  I am also not to thrilled with the user experience.  It puts you though an initial color cast series that I’m not sure why it is there.  Discovery of the remaining adjustments isn’t that great.  In the end I found myself wanting Thumbia back. Panorama This is one of the apps that I like.  I found it easy to use as it guides you with a target circle that you center for it to take the next pictures.  It also stitches the images with amazing speed.  The one thing I wish it had was the capability to turn the phone into portrait orientation and do a taller panorama.  Perhaps we will see this in the future. Nokia Music After getting over the missing album art I found that there were a number of missing features with this app as well.  I have a Zune HD and I am used to being able to go through my collection and adding songs, albums or artists to my now playing.  There also doesn’t seem to be a way to manage playlists that I have seen yet.  Other than that the UI is familiar and it give Nokia City Lens Augmented reality is a cool concept, but I still haven’t seen it implemented in a compelling fashion beyond a demo at TED a couple of years ago.  The app still leaves me wanting as well.  It does give an interesting toy.  It gives you the ability to look for general categories and see general direction and clusters of locations.  I think as this concept is better thought out it will become more compelling. Nokia Trailers I don’t know how often I will use this app, but I do like being able to see what movies are being promoted.  I can’t wait for The Hobbit to come out and the trailer was just what the doctor ordered.  I can see coming back to this app from time to time. PhotoBeamer PhotoBeamer is a strange beast that needs a better instruction manual.  It seems a lot like magic but very confusing.  I need some more testing, but I don’t think this is something that most people are going to understand quickly and may give up before getting it to work.  I may put an update here after playing with it further. Ringtone Maker The app was just published and it didn’t work very well for me. It couldn’t find 95% of the songs that Nokia Music was playing for me and crashed several times.  It also had songs named wrong that when I checked them in Nokia Music they were fine.  This app looks like it has a long way to go. Summary In all I think that Nokia is offering a well rounded set of initial applications that can get any new owner started.  There is definitely room for improvement in all of these apps.  The main need is usability upgrades.  I would guess that with feedback from users they will come up to acceptable levels.  Try them out and see if you agree. del.icio.us Tags: Windows Phone,Nokia,Lumia,Nokia Apps,ESPN,PhotoBeamer,City Lens,YouSendIt,Drive,Maps

  Read the article

• CodePlex Daily Summary for Thursday, August 07, 2014

  CodePlex Daily Summary for Thursday, August 07, 2014Popular ReleasesSharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...JSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.AD4 Application Designer for flow based .NET applications: AD4.AppDesigner.23.24: AD4.Iteration.23.24(Advanced Rendering Features) DesignAttribute parameter LabelPosition to define position of flow pin label: AD4_SyntaxDefinition extended by parameter LabelPosition FileExtension extended to parse value of parameter LabelPosition AppDesignAttribute extended by LabelPosition RaiseAlarmFlow of AlarmClockSample.10 extended to test the new attribute RenderFlowChartPinCaptions improved to handle LabelPosition parameter ToDo: Some tutorials are unfinished but coming soon...Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialForms 7 - A lightweight InfoPath alternative for SharePoint: Forms7 0.0.07 Alpha Release: Minor bug fixes for repeating content functionality and modifications so that Forms7 will work with older versions of Internet ExplorerEASTester: EASTester 1.4: This release has several new features: •You can set proxy server settings. This means you can point it to Fiddler and see more details on the requests and responses. The default is 127.0.0.8 and port 8888 – which is what Fiddler’s proxy defaults to. •There is limited ability for the application to lookup helpful information on the first status code in the response – you will see it displayed in the lowest text box of the Conversation window. This will make the Conversation window a lot easi...Lexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.BoxStarter: Boxstarter 2.4.80: Running the Setup.bat file will install Chocolatey if not present and then install the Boxstarter modules.ProjkyAddin ssms addin script shortcut ssmsaddin: projkyaddin source code and msi files.: projkyaddin source code and msi files.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.New ProjectsADShop: Project ADShop Categoty : Shop / Bussiness Dev : Andy Nguy?n Create : 7/13/2014 Notes : This source is for students . Don't use for marketing online !Aspose Java for Docx4j: Comparison Between Docx4j And AsposeCode Coverage With Visual Studio: This is going to be Code Coverage Plugin for Visual StudioEuler circuit: Initial releaseLexisnexis directory of corporate affiliates Text Analyzer: The program is made for analyzing documents, Lexisnexis directory of corporate affiliates.Manipulator: It's an HTML tool that provides you some functions. Written in javascript.MicroJSON - Lightweight JSON library: MicroJSON is a lightweight JSON library that provides methods to create and read JSON objects and strings. It is useful for .Net Micro Framework.Ollies MSCRM Tools: Useful tools for your working life with MSCRMOnline: This is a demo appPESS2: nothing particularPrivateScriptLanguage: PSL is a simple Script-Language which can be used for custom shell-development or low-level scripting in applications. You can easily integrate it in any app!QuickDAL: QDAL provides a simple and efficient Data Access Layer between business entities and a T-SQL compatible database.Regular delaunay triangulation: Initial releaseSimpleWebService: This application should provide a simple platform to simulate all kinds of Web-API and/or network services, to provide a good testing environment for developersThe Mario Kart 8 App: Well hello there people! Today I bring to you a new working project for Mario Kart 8 called The Mario Kart 8 App!Visual Studio Online REST API: Visual Studio Online Work Item Tracking REST API sample client written in C#.

  Read the article

• PASS Summit 2010 BI Workshop Feedbacks

  - by Davide Mauri

  As many other speakers already did, I’d like to share with the SQL Community the feedback of my PASS Summit 2010 Workshop. For those who were not there, my workshop was the “BI From A-Z” and the main objective of that workshop was to introduce people in the BI world not only from a technical point of view but insist a lot on the methodological and “engineered” approach. The will to put more engineering in the IT (and specially in the BI field) is something that has been growing stronger and stronger in me every day for of this last 5 years since is simply envy the fact that Airbus, Fincatieri, BMW (just to name a few) can create very complex machine “just” using putting people together and giving them some rules to follow (Of course this is an oversimplification but I think you get what I mean). The key point of engineering is that, after having defined the project blueprint, you have the possibility to give to a huge number of people, the rules to follow, the correct tools in order to implement the rules easily and semi-automatically and a way to measure the quality of the results. Could this be done in IT? Very big question, so my scope is now limited to BI. So that’s the main point of my workshop: and entry-level approach to BI (level was 200) in order to allow attendees to know the basics, to understand what tools they should use for which purpose and, above all, a set of rules and tools in order to make a BI solution scalable in terms of people working on it, while still maintaining a very good quality. All done not focusing only on the practice but explaining the theory behind to see how it can help *a lot* to build a correct solution despite the technology used to implement it. The idea is to reach a point where more then 70% of the work done to create a BI solution can be reused even if technologies changes. This is a very demanding challenge nowadays with the coming of Denali and its column-aligned storage and the shiny-new DAX language. As you may understand I was looking forward to get the feedback since you may have noticed that there’s a lot of “architectural” stuff in IT but really nothing on “engineering”. So how the session could be perceived by the attendees was really unknown to me. The feedback could also give a good indication if the need of more “engineering” is something I feel only by myself or if is something more broad. I’m very happy to be able to say that the overall score of 4.75 put my workshop in the TOP 20 session (on near 200 sessions)! Here’s the detailed evaluations: How would you rate the usefulness of the information presented in your day-to-day environment? 4.75 Answer:    # of Responses 3    1         4    12        5    42               How would you rate the Speaker's presentation skills? 4.80 Answer:    # of Responses 3 : 1         4 : 9         5 : 45               How would you rate the Speaker's knowledge of the subject? 4.95 Answer:    # of Responses 4 :  3         5 : 52               How would you rate the accuracy of the session title, description and experience level to the actual session? 4.75 Answer:    # of Responses 3 : 2         4 : 10         5 : 43               How would you rate the amount of time allocated to cover the topic/session? 4.44 Answer:    # of Responses 3 : 7         4 : 17        5 : 31               How would you rate the quality of the presentation materials? 4.62 Answer:    # of Responses 4 : 21        5 : 34 The comments where all very positive. Many of them asked for more time on the subject (or to shorten the very last topics). I’ll make treasure of these comments and will review the content accordingly. We’ll organize a two-day classes on this topic, where also more examples will be shown and some arguments will be explained more deeply. I’d just like to answer a comment that asks how much of what I shown is “universally applicable”. I can tell you that all of our BI project follow these rules and they’ve been applied to different markets (Insurance, Fashion, GDO) with different people and different teams and they allowed us to be “Adaptive” against the customer. The more the rules are well defined and the more there are tools that supports their implementations, the easier is to add new people to the project and to add or change solution features. Think of a car. How come that almost any mechanic can help you to fix a problem? Because they know what to expect. Because there a rules that allow them to identify the problem without having to discover each time how the car has been implemented build. And this is of course also true for car upgrades/improvements. Last but not least: thanks a lot to everyone for coming!

  Read the article

• Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

  - by Latheesan Kanes

  I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• Server HTTP Load times slow?

  - by cdog5000

  Hello, My server @ codemeh.com (HTTP Server) seems to be randomly loading slowly, I cannot tell if it just my forums (http://www.codemeh.com/forums/) that are loading slowly or if the WHOLE site is just loading slowly since my forums are the largest thing on the site right now. load average: 0.02, 0.17, 0.20 That is super low to my knowledge. I have tried Google Page Analytic plug-in for FireFox to solve the problem but nothing comes up that is VERY bad. If someone could investigate this for me since I am very new at apache and server configurations. Thanks! (top): PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7493 www-data 15 0 98.2m 16m 9092 S 3 0.8 0:27.24 apache2 26429 www-data 15 0 98.2m 15m 7392 S 3 0.7 0:03.45 apache2 26477 www-data 17 0 98.2m 15m 7396 S 3 0.7 0:03.16 apache2 1 root 15 0 2468 1384 1156 S 0 0.1 0:00.49 init 1367 root 25 0 2564 816 660 S 0 0.0 0:00.00 xinetd 1526 root 15 0 29576 5420 1976 S 0 0.3 1:02.69 fail2ban-server 3703 root 15 0 13512 9312 1696 S 0 0.4 0:11.59 miniserv.pl 3915 postfix 15 0 6056 1652 1320 S 0 0.1 0:00.00 pickup 4010 root 15 0 4548 1296 972 S 0 0.1 0:37.36 ntpd 7448 root 15 0 98528 26m 20m S 0 1.3 0:00.27 apache2 7454 www-data 18 0 33580 2616 368 S 0 0.1 0:00.04 apache2 7528 www-data 18 0 108m 24m 15m S 0 1.2 0:27.60 apache2 7974 root 16 0 8700 2728 2164 S 0 0.1 0:00.08 sshd 8123 cdog5000 15 0 8832 1596 896 S 0 0.1 0:00.00 sshd 8126 cdog5000 18 0 4484 1716 1384 S 0 0.1 0:00.00 bash 8141 cdog5000 15 0 2344 980 796 R 0 0.0 0:00.11 top 13461 root 15 0 8700 2728 2164 S 0 0.1 0:00.07 sshd 13567 cdog5000 18 0 8832 1492 896 S 0 0.1 0:00.33 sshd 13569 cdog5000 18 0 4484 1728 1388 S 0 0.1 0:00.09 bash 17983 root 15 0 4392 1268 988 S 0 0.1 0:00.00 su 17987 root 15 0 4516 1752 1380 S 0 0.1 0:00.09 bash 18081 www-data 15 0 98.2m 14m 6588 S 0 0.7 0:04.91 apache2 20000 www-data 15 0 98.3m 15m 8040 S 0 0.8 0:02.45 apache2 20019 www-data 15 0 98.2m 14m 6808 S 0 0.7 0:04.97 apache2 30343 root 15 0 3964 1012 764 S 0 0.0 0:00.03 vsftpd 30382 root 15 0 2304 908 716 S 0 0.0 0:00.62 cron 30401 mysql 17 0 141m 17m 5416 S 0 0.9 1:02.20 mysqld 30424 root 15 0 5472 912 504 S 0 0.0 0:00.04 sshd 30473 syslog 15 0 1916 676 536 S 0 0.0 0:01.02 syslogd 30611 amavis 15 0 33872 25m 2292 S 0 1.2 0:03.11 amavisd-new 31890 amavis 18 0 34888 24m 1792 S 0 1.2 0:00.00 amavisd-new 31891 amavis 18 0 34888 24m 1784 S 0 1.2 0:00.00 amavisd-new 32397 clamav 18 0 104m 84m 1272 S 0 4.1 1:06.46 clamd 32563 clamav 15 0 12832 5716 4440 S 0 0.3 0:01.29 freshclam 32573 root 23 0 1892 456 372 S 0 0.0 0:00.00 courierlogger 32575 root 18 0 2096 684 544 S 0 0.0 0:00.01 authdaemond 32583 root 23 0 1892 360 284 S 0 0.0 0:00.00 courierlogger 32584 root 24 0 2000 612 516 S 0 0.0 0:00.00 couriertcpd 32598 root 23 0 1892 360 284 S 0 0.0 0:00.00 courierlogger 32599 root 25 0 2000 612 516 S 0 0.0 0:00.00 couriertcpd 32604 root 18 0 1892 460 372 S 0 0.0 0:00.00 courierlogger 32605 root 18 0 2000 624 532 S 0 0.0 0:00.00 couriertcpd 32607 root 18 0 2308 404 256 S 0 0.0 0:00.02 authdaemond 32608 root 18 0 2096 260 116 S 0 0.0 0:00.03 authdaemond 32609 root 15 0 2308 404 256 S 0 0.0 0:00.03 authdaemond 32610 root 18 0 2096 260 116 S 0 0.0 0:00.02 authdaemond 32612 root 18 0 2308 404 256 S 0 0.0 0:00.02 authdaemond 32621 root 24 0 1892 364 284 S 0 0.0 0:00.00 courierlogger 32622 root 25 0 2000 608 516 S 0 0.0 0:00.00 couriertcpd 32633 root 15 0 105m 936 716 S 0 0.0 0:02.26 nscd 32719 root 16 0 6252 1680 1344 S 0 0.1 0:01.24 master 32738 postfix 15 0 6188 1776 1400 S 0 0.1 0:00.44 qmgr 32758 postfix 15 0 6492 2564 1788 S 0 0.1 0:00.14 tlsmgr (/etc/apache2/sites-available/default): NameVirtualHost * <VirtualHost *> ServerAdmin webmaster@localhost DocumentRoot /var/www/web1/web/ <Directory /var/www/web1/web/> Options Indexes MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have fail2ban server and I dont have any firewall at this point and time that I know of. SMF is 2.0 RC4 and apache version is 2.2.14. I run a MySQL server on another box in the same DC (Persistent Connection). I installed eAccelerator today and it didnt help.

  Read the article

• I'm a contract developer and I think I'm about to get screwed [closed]

  - by kagaku

  I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

  Read the article

• Maintenance plans love story

  - by Maria Zakourdaev

  There are about 200 QA and DEV SQL Servers out there.  There is a maintenance plan on many of them that performs a backup of all databases and removes the backup history files. First of all, I must admit that I’m no big fan of maintenance plans in particular or the SSIS packages in general.  In this specific case, if I ever need to change anything in the way backup is performed, such as the compression feature or perform some other change, I have to open each plan one by one. This is quite a pain. Therefore, I have decided to replace the maintenance plans with a stored procedure that will perform exactly the same thing.  Having such a procedure will allow me to open multiple server connections and just execute an ALTER PROCEDURE whenever I need to change anything in it. There is nothing like good ole T-SQL. The first challenge was to remove the unneeded maintenance plans. Of course, I didn’t want to do it server by server.  I found the procedure msdb.dbo.sp_maintplan_delete_plan, but it only has a parameter for the maintenance plan id and it has no other parameters, like plan name, which would have been much more useful. Now I needed to find the table that holds all maintenance plans on the server. You would think that it would be msdb.dbo.sysdbmaintplans but, unfortunately, regardless of the number of maintenance plans on the instance, it contains just one row.    After a while I found another table: msdb.dbo.sysmaintplan_subplans. It contains the plan id that I was looking for, in the plan_id column and well as the agent’s job id which is executing the plan’s package: That was all I needed and the rest turned out to be quite easy.  Here is a script that can be executed against hundreds of servers from a multi-server query window to drop the specific maintenance plans. DECLARE @PlanID uniqueidentifier   SELECT @PlanID = plan_id FROM msdb.dbo.sysmaintplan_subplans Where name like ‘BackupPlan%’   EXECUTE msdb.dbo.sp_maintplan_delete_plan @plan_id=@PlanID   The second step was to create a procedure that will perform  all of the old maintenance plan tasks: create a folder for each database, backup all databases on the server and clean up the old files. The script is below. Enjoy.   ALTER PROCEDURE BackupAllDatabases                                   @PrintMode BIT = 1 AS BEGIN          DECLARE @BackupLocation VARCHAR(500)        DECLARE @PurgeAferDays INT        DECLARE @PurgingDate VARCHAR(30)        DECLARE @SQLCmd  VARCHAR(MAX)        DECLARE @FileName  VARCHAR(100)               SET @PurgeAferDays = -14        SET @BackupLocation = '\\central_storage_servername\BACKUPS\'+@@servername               SET @PurgingDate = CONVERT(VARCHAR(19), DATEADD (dd,@PurgeAferDays,GETDATE()),126)               SET @FileName = '?_full_'+                      + REPLACE(CONVERT(VARCHAR(19), GETDATE(),126),':','-')                      +'.bak';          SET @SQLCmd = '               IF ''?'' <> ''tempdb'' BEGIN                      EXECUTE master.dbo.xp_create_subdir N'''+@BackupLocation+'\?\'' ;                        BACKUP DATABASE ? TO  DISK = N'''+@BackupLocation+'\?\'+@FileName+'''                      WITH NOFORMAT, NOINIT,  SKIP, REWIND, NOUNLOAD, COMPRESSION,  STATS = 10 ;                        EXECUTE master.dbo.xp_delete_file 0,N'''+@BackupLocation+'\?\'',N''bak'',N'''+@PurgingDate+''',1;               END'          IF @PrintMode = 1 BEGIN               PRINT @SQLCmd        END               EXEC sp_MSforeachdb @SQLCmd        END

  Read the article

• A Simple Collapsible Menu with jQuery

  - by Vincent Maverick Durano

  In this post I'll demonstrate how to make a simple collapsible menu using jQuery. To get started let's go ahead and fire up Visual Studio and create a new WebForm.  Now let's build our menu by adding some div, p and anchor tags. Since I'm using a masterpage then the ASPX mark-up should look something like this:   1: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 2: <div id="Menu"> 3: <p>CARS</p> 4: <div class="section"> 5: <a href="#">Car 1</a> 6: <a href="#">Car 2</a> 7: <a href="#">Car 3</a> 8: <a href="#">Car 4</a> 9: </div> 10: <p>BIKES</p> 11: <div class="section"> 12: <a href="#">Bike 1</a> 13: <a href="#">Bike 2</a> 14: <a href="#">Bike 3</a> 15: <a href="#">Bike 4</a> 16: <a href="#">Bike 5</a> 17: <a href="#">Bike 6</a> 18: <a href="#">Bike 7</a> 19: <a href="#">Bike 8</a> 20: </div> 21: <p>COMPUTERS</p> 22: <div class="section"> 23: <a href="#">Computer 1</a> 24: <a href="#">Computer 2</a> 25: <a href="#">Computer 3</a> 26: <a href="#">Computer 4</a> 27: </div> 28: <p>OTHERS</p> 29: <div class="section"> 30: <a href="#">Other 1</a> 31: <a href="#">Other 2</a> 32: <a href="#">Other 3</a> 33: <a href="#">Other 4</a> 34: </div> 35: </div> 36: </asp:Content>   As you can see there's nothing fancy about the mark up above.. Now lets go ahead create a simple CSS to set the look and feel our our Menu. Just for for the simplicity of this demo, add the following CSS below under the <head> section of the page or if you are using master page then add it a the content head. Here's the CSS below:   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <style type="text/css"> 3: #Menu{ 4: width:300px; 5: } 6: #Menu > p{ 7: background-color:#104D9E; 8: color:#F5F7FA; 9: margin:0; 10: padding:0; 11: border-bottom-style: solid; 12: border-bottom-width: medium; 13: border-bottom-color:#000000; 14: cursor:pointer; 15: } 16: #Menu .section{ 17: padding-left:5px; 18: background-color:#C0D9FA; 19: } 20: a{ 21: display:block; 22: color:#0A0A07; 23: } 24: </style> 25: </asp:Content>   Now let's add the collapsible effects on our menu using jQuery. To start using jQuery then register the following script at the very top of the <head> section of the page or if you are using master page then add it the very top of  the content head section.   <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" ></script>   As you can see I'm using Google AJAX API CDN to host the jQuery file. You can also download the jQuery here and host it in your server if you'd like. Okay here's the the jQuery script below for adding the collapsible effects:   1: <script type="text/javascript"> 2: $(function () { 3: $("a").mouseover(function () { $(this).addClass("highlightRow"); }) 4: .mouseout(function () { $(this).removeClass("highlightRow"); }); 5:   6: $(".section").hide(); 7: $("#Menu > p").click(function () { 8: $(this).next().slideToggle("Slow"); 9: }); 10: }); 11: </script>   Okay to give you a little bit of explaination, at line 3.. what it does is it looks for all the "<a>" anchor elements on the page and attach the mouseover and mouseout event. On mouseover, the highlightRow css class is added to <a> element and on mouse out we remove the css class to revert the style to its default look. at line 6 we will hide all the elements that has a class name set as "section" and if you look at the mark up above it is refering to the <div> elements right after each <p> element. At line 7.. what it does is it looks for a <p> element that is a direct child of the element that has an ID of "Menu" and then attach the click event to toggle the visibilty of the section. Here's how it looks in the page: On Initial Load: After Clicking the Section Header:   That's it! I hope someone find this post usefu!   Technorati Tags: ASP.NET,JQuery,Master Page,JavaScript

  Read the article

• Beyond Cloud Technology, Enabling A More Agile and Responsive Organization

  - by sxkumar

  This is the second part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain”. In the first part,  I was sharing with you how a broad-based transformation makes cloud more than a technology initiative, I will describe in this section how it requires people (organizational) and process changes as well, and these changes are as critical as is the choice of right tools and technology. People: Most IT organizations have a fairly complex organizational structure. There are different groups, managing different pieces of the puzzle, and yet, they don't always work together. Provisioning a new application therefore may require a request to float endlessly through system administrators, DBAs and middleware admin worlds – resulting in long delays and constant finger pointing.  Cloud users expect end-to-end automation - which requires these silos to be greatly simplified, if not completely eliminated.  Most customers I talk to acknowledge this problem but are quick to admit that such a transformation is hard. As hard as it may be, I am afraid that the status quo is no longer an option. Sticking to an organizational structure that was created ages back will not only impede cloud adoption,  it also risks making the IT skills increasingly irrelevant in a world that is rapidly moving towards converged applications and infrastructure.   Process: Most IT organizations today operate with a mindset that they must fully "control" access to any and all types of IT services. This in turn leads to people clinging on to outdated manual approval processes .  While requiring approvals for scarce resources makes sense, insisting that every single request must be manually approved defeats the very purpose of cloud. Not only this causes delays, thereby at least partially negating the agility benefits, it also results in gross inefficiency. In a cloud environment, self-service access should be governed by policies, quotas that the administrators can define upfront . For a cloud initiative to be successful, IT organizations MUST be ready to empower users by giving them real control rather than insisting on brokering every single interaction between users and the cloud resources. Technology: From a technology perspective, cloud is about consolidation, standardization and automation. A consolidated and standardized infrastructure helps increase utilization and reduces cost. Additionally, it  enables a much higher degree of automation - thereby providing users the required agility while minimizing operational costs.  Obviously, automation is the key to cloud. Unfortunately it hasn’t received as much attention within enterprises as it should have.  Many organizations are just now waking up to the criticality of automation and it still often gets relegated to back burner in favor of other "high priority" projects. However, it is important to understand that without the right type and level of automation, cloud will remain a distant dream for most enterprises. This in turn makes the choice of the cloud management software extremely critical.  For a cloud management software to be effective in an enterprise environment, it must meet the following qualifications: Broad and Deep Solution It should offer a broad and deep solution to enable the kind of broad-based transformation we are talking about.  Its footprint must cover physical and virtual systems, as well as infrastructure, database and application tiers. Too many enterprises choose to equate cloud with virtualization. While virtualization is a critical component of a cloud solution, it is just a component and not the whole solution. Similarly, too many people tend to equate cloud with Infrastructure-as-a-Service (IaaS). While it is perfectly reasonable to treat IaaS as a starting point, it is important to realize that it is just the first stepping stone - and on its own it can only provide limited business benefits. It is actually the higher level services, such as (application) platform and business applications, that will bring about a more meaningful transformation to your enterprise. Run and Manage Efficiently Your Mission Critical Applications It should not only be able to run your mission critical applications, it should do so better than before.  For enterprises, applications and data are the critical business assets  As such, if you are building a cloud platform that cannot run your ERP application, it isn't truly a "enterprise cloud".  Also, be wary of  vendors who try to sell you the idea that your applications must be written in a certain way to be able to run on the cloud. That is nothing but a bogus, self-serving argument. For the cloud to be meaningful to enterprises, it should adopt to your applications - and not the other way around.  Automated, Integrated Set of Cloud Management Capabilities At the root of many of the problems plaguing enterprise IT today is complexity. A complex maze of tools and technology, coupled with archaic  processes, results in an environment which is inflexible, inefficient and simply too hard to manage. Management tool consolidation, therefore, is key to the success of your cloud as tool proliferation adds to complexity, encourages compartmentalization and defeats the very purpose that you are building the cloud for. Decision makers ought to be extra cautious about vendors trying to sell them a "suite" of disparate and loosely integrated products as a cloud solution.  An effective enterprise cloud management solution needs to provide a tightly integrated set of capabilities for all aspects of cloud lifecycle management. A simple question to ask: will your environment be more or less complex after you implement your cloud? More often than not, the answer will surprise you.  At Oracle, we have understood these challenges and have been working hard to create cloud solutions that are relevant and meaningful for enterprises.  And we have been doing it for much longer than you may think. Oracle was one of the very first enterprise software companies to make our products available on the Amazon Cloud. As far back as in 2007, we created new cloud solutions such as Cloud Database Backup that are helping customers like Amazon save millions every year.  Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies. I will dedicated the third and final part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain” to Oracle Cloud Technologies Building Blocks and how they mapped into our vision of Enterprise Cloud. Stay Tuned.

  Read the article

• Object array updates one instance repeatedly [on hold]

  - by MGN001

  I'm making a 2D shooter, and the player object holds an array of bullets that represent how many shots the player can have on screen at once. At least, this is what I'm trying for. What's happening is that each time any of the objects in the array is called, it seems to update a single object in memory. So, if I fire and then fire again, the object "starts over" from where I shot from and moves twice as fast. I've spent weeks trying to fix this and I've managed nothing. Hopefully another pair of eyes will see something I've missed. Player.cpp #include "Player.h" const int startLives = 3; const int maxHealth = 2; const float speed = 1; const int maxVelocity = 500; const int topBound = WINDOW_HEIGHT / 5 * 3; const int slowRate = 500; const int accRate = 1000; const int maxBullets = 5; const float spriteWidth = 99; const float spriteHeight = 75; const Vector2f startPosition = { (WINDOW_WIDTH / 2) - (spriteWidth / 2), (WINDOW_HEIGHT / 4 * 3) - (spriteHeight / 2) }; Bullet bullets[maxBullets]; Bullet * bulletPointers[maxBullets]; SDL_Texture * playerHealthy; SDL_Texture * playerDamaged; SDL_Texture * currentSprite; SDL_Rect * rect; Vector2f position; Vector2f velocity; int Health; int Lives; Player::Player() { rect = new SDL_Rect(); } Player::~Player() { SDL_DestroyTexture(playerHealthy); SDL_DestroyTexture(playerDamaged); SDL_DestroyTexture(currentSprite); rect = NULL; } void Player::Initialize(SDL_Renderer * renderer) { SDL_Surface * temp; temp = IMG_Load(".\\Sprites\\player.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } playerHealthy = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\playerDamaged.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } playerDamaged = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\laserGreen.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } SDL_Texture * bullet = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\laserGreenShot.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } SDL_Texture * explosion = SDL_CreateTextureFromSurface(renderer, temp); for (int i = 0; i < maxBullets; i++) { bullets[i].Initialize(renderer, bullet, explosion); bulletPointers[i] = NULL; } temp = NULL; rect->h = spriteHeight; rect->w = spriteWidth; Reset(); } void Player::Update(Input input, float deltaTime) { if (abs(velocity.x) < slowRate * deltaTime) { velocity.x = 0; } else if (velocity.x > 0) { velocity.x -= slowRate * deltaTime; } else if (velocity.x < 0) { velocity.x += slowRate * deltaTime; } if (abs(velocity.y) < slowRate * deltaTime) { velocity.y = 0; } if (velocity.y > 0) { velocity.y -= slowRate * deltaTime; } else if (velocity.y < 0) { velocity.y += slowRate * deltaTime; } if (Health <= 0) { --Lives; Spawn(); } velocity.x += UnitVector(input.InputNew.movement).x * accRate * deltaTime; velocity.y += UnitVector(input.InputNew.movement).y * accRate * deltaTime; if (Magnitude(velocity) > maxVelocity) { velocity.x = UnitVector(velocity).x * maxVelocity; velocity.y = UnitVector(velocity).y * maxVelocity; } position.x += velocity.x * deltaTime * speed; position.y += velocity.y * deltaTime * speed; if (input.InputNew.JumpLeft && !input.InputOld.JumpLeft) { position.x -= spriteWidth; } if (input.InputNew.JumpRight && !input.InputOld.JumpRight) { position.x += spriteWidth; } Boundaries(); rect->x = position.x; rect->y = position.y; if (input.InputNew.Fire && !input.InputOld.Fire) { Fire(); } for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] != NULL) { bullets[i].Update(deltaTime); if (bullets[i].getPosition().y < -33) { bulletPointers[i] = NULL; } } } } void Player::Draw(SDL_Renderer * renderer) { for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] != NULL) { bullets[i].Draw(renderer); } } SDL_RenderCopy(renderer, currentSprite, NULL, rect); } void Player::Spawn() { position = startPosition; Health = maxHealth; currentSprite = playerHealthy; rect->x = position.x; rect->y = position.y; } void Player::Boundaries() { if (position.x < 0) { position.x = 0; velocity.x *= -1; } else if (position.x > WINDOW_WIDTH - spriteWidth) { position.x = WINDOW_WIDTH - spriteWidth; velocity.x *= -1; } if (position.y < topBound) { position.y = topBound; velocity.y *= -1; } else if (position.y > WINDOW_HEIGHT - spriteHeight) { position.y = WINDOW_HEIGHT - spriteHeight; velocity.y *= -1; } } int Player::getLives() { return Lives; } void Player::Reset() { Lives = startLives; Spawn(); } void Player::Fire() { for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] == NULL) { bulletPointers[i] = &bullets[i]; bullets[i].Fire(position,velocity.x/2); break; } } } Bullet.cpp #include "Bullet.h" const int speed = 500; Vector2f bulletVelocity; float ExplosionMax = 0.5f; float ExplosionTimer; const Vector2f fireOffset = { 45.5f, 10.0f }; const Vector2f explosionOffset = { 23.5f, -27.0f }; const Vector2i bulletSize = { 9, 33 }; const Vector2i explosionSize = { 56, 54 }; Vector2f bulletPosition; SDL_Texture * bulletSprite; SDL_Texture * explosionSprite; SDL_Texture * bulletCurrentSprite; SDL_Rect * bulletRect; Bullet::Bullet() { } Bullet::~Bullet() { } void Bullet::Initialize(SDL_Renderer * renderer, SDL_Texture * bullet, SDL_Texture * explosion) { bulletSprite = bullet; explosionSprite = explosion; bulletRect = new SDL_Rect(); } void Bullet::Update(float deltaTime) { bulletPosition.y -= bulletVelocity.y * deltaTime; bulletPosition.x += bulletVelocity.x * deltaTime; bulletRect->x = static_cast<int>(bulletPosition.x); bulletRect->y = static_cast<int>(bulletPosition.y); } void Bullet::Draw(SDL_Renderer * renderer) { SDL_RenderCopy(renderer, bulletCurrentSprite, NULL, bulletRect); } void Bullet::Fire(Vector2f pos, float xSpeed) { bulletPosition.x = pos.x + fireOffset.x; bulletPosition.y = pos.y + fireOffset.y; bulletVelocity.x = xSpeed; bulletVelocity.y = speed; bulletCurrentSprite = bulletSprite; bulletRect->h = bulletSize.y; bulletRect->w = bulletSize.x; bulletRect->x = static_cast<int>(bulletPosition.x); bulletRect->y = static_cast<int>(bulletPosition.y); } Vector2f Bullet::getPosition() { return bulletPosition; } void Bullet::Hit() { bulletCurrentSprite = explosionSprite; bulletVelocity = { 0.0f, 0.0f }; ExplosionTimer = ExplosionMax; bulletPosition.x += explosionOffset.x; bulletPosition.y += explosionOffset.y; bulletRect->w = explosionSize.x; bulletRect->h = explosionSize.y; }

  Read the article

• Set the JAXB context factory initialization class to be used

  - by user1902288

  I have updated our projects (Java EE based running on Websphere 8.5) to use a new release of a company internal framework (and Ejb 3.x deployment descriptors rather than the 2.x ones). Since then my integration Tests fail with the following exception: [java.lang.ClassNotFoundException: com.ibm.xml.xlxp2.jaxb.JAXBContextFactory] I can build the application with the previous framework release and everything works fine. While debugging i noticed that within the ContextFinder (javax.xml.bind) there are two different behaviours: Previous Version (Everything works just fine): None of the different places brings up a factory class so the default factory class gets loaded which is com.sun.xml.internal.bind.v2.ContextFactory (defined as String constant within the class). Upgraded Version (ClassNotFound): There is a resource "META-INF/services/javax.xml.bind.JAXBContext" beeing loaded successfully and the first line read makes the ContextFinder attempt to load "com.ibm.xml.xlxp2.jaxb.JAXBContextFactory" which causes the error. I now have two questions: What sort is that resource? Because inside our EAR there is two WARs and none of those two contains a folder services in its META-INF directory. Where could that value be from otherwise? Because a filediff showed me no new or changed properties files. No need to say i am going to read all about the JAXB configuration possibilities but if you have first insights on what could have gone wrong or help me out with that resource (is it a real file i have to look for?) id appreciate a lot. Many Thanks! EDIT (according to comments Input/Questions): Out of curiosity, does your framework include JAXB JARs? Did the old version of your framework include jaxb.properties? Indeed (i am a bit surprised) the framework has a customized eclipselink-2.4.1-.jar inside the EAR that includes both a JAXB implementation and a jaxb.properties file that shows the following entry in both versions (the one that finds the factory as well as in the one that throws the exception): javax.xml.bind.context.factory=org.eclipse.persistence.jaxb.JAXBContextFactory I think this is has nothing to do with the current issue since the jar stayed exactly the same in both EARs (the one that runs/ the one with the expection) It's also not clear to me why the old version of the framework was ever selecting the com.sun implementation There is a class javax.xml.bind.ContextFinder which is responsible for initializing the JAXBContextFactory. This class searches various placess for the existance of a jaxb.properties file or a "javax.xml.bind.JAXBContext" resource. If ALL of those places dont show up which Context Factory to use there is a deault factory loaded which is hardcoded in the class itself: private static final String PLATFORM_DEFAULT_FACTORY_CLASS = "com.sun.xml.internal.bind.v2.ContextFactory"; Now back to my problem: Building with the previous version of the framework (and EJB 2.x deployment descriptors) everything works fine). While debugging i can see that there is no configuration found and thatfore above mentioned default factory is loaded. Building with the new version of the framework (and EJB 3.x deployment descriptors so i can deploy) ONLY A TESTCASE fails but the rest of the functionality works (like i can send requests to our webservice and they dont trigger any errors). While debugging i can see that there is a configuration found. This resource is named "META-INF/services/javax.xml.bind.JAXBContext". Here are the most important lines of how this resource leads to the attempt to load 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' which then throws the ClassNotFoundException. This is simplified source of the mentioned javax.xml.bind.ContextFinder class: URL resourceURL = ClassLoader.getSystemResource("META-INF/services/javax.xml.bind.JAXBContext"); BufferedReader r = new BufferedReader(new InputStreamReader(resourceURL.openStream(), "UTF-8")); String factoryClassName = r.readLine().trim(); The field factoryClassName now has the value 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' (The day i understand how to format source code on stackoverflow will be my biggest step ahead.... sorry for the formatting after 20 mins it still looks the same :() Because this has become a super lager question i will also add a bounty :)

  Read the article

< Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >