Search Results

Search found 2279 results on 92 pages for 'cable clutter'.

Page 62/92 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Can I use the Airport Express as a an uplink between two networks?

  - by Ant Swift

  I have two separate networks using different IP ranges, 192.168.0.* for the wired only, isolated network and 192.160.1.* for the wireless only network which is connected to the internet. The wired network has a network printer setup and working and I want to be able to share it out to members of the wireless network (see diagram below). In short I need some kind of uplink between the two networks. Currently running a cable is out since there is no suitable route. I have a spare Airport Express and I am wondering if I could attach it to the wired network and have it join the wireless and act as the uplink between the two. Anyone know if the device is capable of this?

  Read the article

• IIS site not resolved by DNS server

  - by Alexio

  I've a problem with my network. My Config: SVR01 (ws2008r2): DNS server and Domain Server SVR02 (ws2008r2): IIS (v7.5) Domain Clients In SVR02 there are many sites. When I try to connect on one site (such as: demo1.myhomesite.intra) the browser say "Internet Explor can not display the webpage". Well... In this case I found a workaround: unplug and plug the lan cable (or disable and enable wifi) in my client and the site work correctly. But this workaround is not a solution. Please, can you help me??

  Read the article

• Media Center is sending duplicate #'s when changing channels

  - by Robert

  I recently switched from cable to DirecTV (satellite). I went through the "Set up TV signal" in Media Center, and I went through the manual setup of the remote as it didn't recognize the DirecTV remote. All seemed okay, except sometimes (often - about 1/2 the time) when I select a channel in Media Center's guide it sends 5527 instead of 527 or 5446 instead of 546 - so it doesn't change the channel correctly. (I see the numbers show up on the TV screen before the channel changes.) I tried re-learning the remote, but the problem is still there. (Media Center is changing channels through the IR Blaster attached to the front of the DirecTV box.)

  Read the article

• 3 Monitors, 1 graphics card

  - by mikelbring

  I have a Nvidia GT 120 graphics card. It has a VGA, DVI and DMI output. Can I have 3 monitors with this? One for each port. Also if not, can I use DVI and HDMI and have 2 monitors. I know I can do 2 with the VGA and DVI but I am wondering about DVI and HDMI. Also my last question is, if I can have 2 monitors with the DVI and HDMI, can I use a HDMI to DVI cable and still have the same success?

  Read the article

• How to set up my network/bridging using Apple Airport equipment?

  - by John

  I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

  Read the article

• Connect two devices with ethernet

  - by mofle

  I have a MacBook Pro and I'm going to buy a Boxee Box. I have access to wireless internet, but it's slow and out of my control. So my question is, what is the best way for both devices to get internet access, and the Boxee Box to get SMB access to the Mac, when only the Mac is connected to the wireless internet? I'm thinking an ethernet cable from the Boxee Box to my Mac, and connection sharing on my Mac. Can you explain the setup, is there any configuring.

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

• Lenovo G530 laptop screen flicker

  - by Kevin

  I have a Lenovo G530 laptop that has an issue with screen flicker that is getting worse. The computer screen will start going thru a crazy screen flicker then will stop and start again. I have already checked cable connection to lcd on motherboard and reseated connection as someone suggested in another posting I found online that resolved issue. I am starting to think it might be a bad inverter or screen because I have hooked up laptop to external monitor and it is running fine with no flickering happening when the flickering is occurring on laptop. I am attaching a link to a small video I shot of the issue as it is occurring on laptop screen. Does anyone have any further suggestions? Bad inverter or screen? Screen flicker vid

  Read the article

• Making my computer an iPhone music dock?

  - by deddebme

  Are there any application which lets me play the music in my iPhone through the USB cable? It will be very convenient if I can just dock the phone (while the music is playing), and the music will come out from the computer's speakers instead of the speaker in the iPhone. Edit 1: Stock iPhone dock does have a line-out jack, thanks SidneySM for reminding me. Now the problem is, even though I have select Line In as the Sound Input in Mac OSX, there is no sound coming out from the speaker. How do I make the Speaker output the Line In audio?

  Read the article

• Is there a way to make scp run faster on a Mac OS X?

  - by paul_sns

  I'm trying to a upload a Flex generated SWF file from my Macbook (running Snow Leopard) using the command scp main.swf server.com:/ I had setup key authentication to prevent typing the user/pass every time. This process normally takes up to two minutes using my connection at home (768kbps down/300+ kbps up). The interesting part is that when I use WinSCP in my Windows XP machine, the process only takes 30 seconds max. Both my MacBook and Windows XP machine use the same internet connection. The MacBook is connected to the router via cable (which should be faster right?) while the Windows XP connects through Wifi. Let me know if you need additional information in order to diagnose the problem. Thanks!

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Text on Cisco ASA console is garbled/missing letters

  - by Some Linux Nerd

  I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• No picture on HDMI Output from a Pioneer 921 AV Receiver to a Projector

  - by Alexey Kulikov

  I am trying hard to tackle a what seemed to be simple problem if wiring my setup together. The setup: Mac Mini (2011) with HDMI Output Pioneer 921 K AV Receiver Acer HD Projector (HDMI) When I hook up my Mac Mini directly to the Projector with a 30 foot (10 meter) HDMI Cable everything is just fine. The picture is sharp and the colors brilliant. However, when I send HDMI to the receiver (into the BD HDMI Input) then I get absolutely no HDMI output to the projector, it keeps saying "no signal". Is there perhaps some magic combination of setup buttons that may help me resolve this problem?

  Read the article

• Any experience with SATA SAS Interposer Cards?

  - by korkman

  Driven by the current price difference between SATA and SAS disks on one side and the potentially bad behaviour of SATA disks in bigger storage arrays on the other side, I have found so-called SATA-to-SAS interposer cards. Advertised as "seamlessly adding SAS capabilities to existing SATA disk drives", I wonder if anyone here has had some experience with these or similar products. The major benefits I can identify are the increased cable voltage (if all drives are SAS connected), the ability to power-cycle the drive and multipath (if desired). Obviously the SATA drive will still have to be RAID edition. The question is: Do these cards indeed increase the overall reliability of a storage system, or will failing SATA disks cause trouble nevertheless? Edit: I'm not asking for hypothetical answers, only actual experience please. I'm well aware that the typical 10k SAS drive is more reliable (and better performing) than 7200 SATA drives. But how does a nearline SAS, which is phyiscally the same disk as its SATA counterpart, compare to the SATA version with interposer?

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

• Can anyone recommend an iPhone dock with PC pass through? [closed]

  - by Kelsey

  I am looking for a dock for my iPhone that has external speakers, a PC pass through, ability to dock vertical and horizontal and accomodate my iPhone case (Oakley case). The case I use is a problem with most docs but if there was one with an extendable connector it would be fine. I really haven't found any docs that work well with any cases. PC pass through doesn't seem very common at all. I don't want to have a seperate cable for my synching and a dock for my desk. Any recommendations even if they are not released yet? Maybe even alternatives to a dock?

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• Setting Screen Resolution for Extended Display on Windows 8

  - by ptamzz

  I'm using a Dell Inspiron laptop with Windows 8 Developers Preview. I've connected a second screen (some Dell 22 inch one) and have been using it with 'Extend these displays' options in the Screen Resolution settings. It use to be all fine but yesterday I changed my VGA cable to the 2nd monitor and since then the resolution of the 2nd monitor is not setting properly. Earlier, while auto detecting the monitor, the right resolution use to appear but now, as you can see from the attached image, none of the resolution in the drop down fits with the right proportion. So how do I set the right screen resolution. (I think the right one is 1680 x 1050 which is not there in the list)

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• Can connect to WAN via PC but router doesnt.

  - by user16877

  I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• My MacBook Pro (2011) is dead

  - by Dave

  I connected my Sony digital camera with the MacBook and the screen turned black. I wonder why because the Sony camera was not on at the time and technically could not be accessed. So I thought it might be temporary and I turned on my camera. Well, it did not work, but my MacBook Pro has been dead since then. It will not turn on - when I hold the power button for five seconds, nothing happens. When I connect the charger cable, the green light is very dim and blinks a little (with about 20% illumination). I wonder what the problem is. I have to call Apple Care, but just so that I know, what could be wrong? Is my MacBook permanently dead? It might be under warranty but I am not sure.

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >