Search Results

Search found 4578 results on 184 pages for 'connections'.

Page 62/184 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Postmaster uses excessive CPU and Disk Writes

    - by wolfcastle
    using PostgreSQL 9.1.2 I'm seeing excessive CPU usage and large amounts of writes to disk from postmaster tasks. This happens even while my application is doing almost nothing (10s of inserts per MINUTE). There are a reasonable number of connections open however. I've been trying to determine what in my application is causing this. I'm pretty newb with postgresql, and haven't gotten anywhere so far. I've turned on some logging options in my config file, and looked at connections in the pg_stat_activity table, but they are all idle. Yet each connection consumes ~ 50% CPU, and is writing ~15M/s to disk (reading nothing). I'm basically using the stock postgresql.conf with very little tweaks. I'd appreciate any advice or pointers on what I can do to track this down. Here is a sample of what top/iotop is showing me: Cpu(s): 18.9%us, 14.4%sy, 0.0%ni, 53.4%id, 11.8%wa, 0.0%hi, 1.5%si, 0.0%st Mem: 32865916k total, 7263720k used, 25602196k free, 575608k buffers Swap: 16777208k total, 0k used, 16777208k free, 4464212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17057 postgres 20 0 236m 33m 13m R 45.0 0.1 73:48.78 postmaster 17188 postgres 20 0 219m 15m 11m R 42.3 0.0 61:45.57 postmaster 17963 postgres 20 0 219m 16m 11m R 42.3 0.1 27:15.01 postmaster 17084 postgres 20 0 219m 15m 11m S 41.7 0.0 63:13.64 postmaster 17964 postgres 20 0 219m 17m 12m R 41.7 0.1 27:23.28 postmaster 18688 postgres 20 0 219m 15m 11m R 41.3 0.0 63:46.81 postmaster 17088 postgres 20 0 226m 24m 12m R 41.0 0.1 64:39.63 postmaster 24767 postgres 20 0 219m 17m 12m R 41.0 0.1 24:39.24 postmaster 18660 postgres 20 0 219m 14m 9.9m S 40.7 0.0 60:51.52 postmaster 18664 postgres 20 0 218m 15m 11m S 40.7 0.0 61:39.61 postmaster 17962 postgres 20 0 222m 19m 11m S 40.3 0.1 11:48.79 postmaster 18671 postgres 20 0 219m 14m 9m S 39.4 0.0 60:53.21 postmaster 26168 postgres 20 0 219m 15m 10m S 38.4 0.0 59:04.55 postmaster Total DISK READ: 0.00 B/s | Total DISK WRITE: 195.97 M/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 17962 be/4 postgres 0.00 B/s 14.83 M/s 0.00 % 0.25 % postgres: aggw aggw [local] idle 17084 be/4 postgres 0.00 B/s 15.53 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17963 be/4 postgres 0.00 B/s 15.00 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17188 be/4 postgres 0.00 B/s 14.80 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17964 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 18664 be/4 postgres 0.00 B/s 15.13 M/s 0.00 % 0.23 % postgres: aggw aggw [local] idle 17088 be/4 postgres 0.00 B/s 14.71 M/s 0.00 % 0.13 % postgres: aggw aggw [local] idle 18688 be/4 postgres 0.00 B/s 14.72 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 24767 be/4 postgres 0.00 B/s 14.93 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18671 be/4 postgres 0.00 B/s 16.14 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 17057 be/4 postgres 0.00 B/s 13.58 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 26168 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18660 be/4 postgres 0.00 B/s 15.85 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle

    Read the article

  • Openvpn mat through access server depending on client

    - by Lucas Kauffman
    I have several services which should be accessible through a VPN. Clients who connect through the VPN server should be NATed so that all their traffic passes through the access server. However server residing on the network should not pass their traffic through the access server their VPN facing services should be accessible, but their internet connections should not pas through the access server. So how can I enable NAT on a per client basis using OpenVPN?

    Read the article

  • Access ReverseProxy from iframe only

    - by soundsofpolaris
    I have OwnCloud setup and it has a feature called External Site. It loads a site in an iframe, so you can stay in the websites shell. I have a page running on a reverse proxy. Is there anyway to only allow the OwnCloud page to access the reverse proxy while blocking any other connections to it? So in this situation, the OwnCloud site is publically accessible but I don't want the reverse proxy to be. On apache2, Ubuntu 14.04, own cloud 7

    Read the article

  • Malware - Technical anlaysis

    - by nullptr
    Note: Please do not mod down or close. Im not a stupid PC user asking to fix my pc problem. I am intrigued and am having a deep technical look at whats going on. I have come across a Windows XP machine that is sending unwanted p2p traffic. I have done a 'netstat -b' command and explorer.exe is sending out the traffic. When I kill this process the traffic stops and obviously Windows Explorer dies. Here is the header of the stream from the Wireshark dump (x.x.x.x) is the machines IP. GNUTELLA CONNECT/0.6 Listen-IP: x.x.x.x:8059 Remote-IP: 76.164.224.103 User-Agent: LimeWire/5.3.6 X-Requeries: false X-Ultrapeer: True X-Degree: 32 X-Query-Routing: 0.1 X-Ultrapeer-Query-Routing: 0.1 X-Max-TTL: 3 X-Dynamic-Querying: 0.1 X-Locale-Pref: en GGEP: 0.5 Bye-Packet: 0.1 GNUTELLA/0.6 200 OK Pong-Caching: 0.1 X-Ultrapeer-Needed: false Accept-Encoding: deflate X-Requeries: false X-Locale-Pref: en X-Guess: 0.1 X-Max-TTL: 3 Vendor-Message: 0.2 X-Ultrapeer-Query-Routing: 0.1 X-Query-Routing: 0.1 Listen-IP: 76.164.224.103:15649 X-Ext-Probes: 0.1 Remote-IP: x.x.x.x GGEP: 0.5 X-Dynamic-Querying: 0.1 X-Degree: 32 User-Agent: LimeWire/4.18.7 X-Ultrapeer: True X-Try-Ultrapeers: 121.54.32.36:3279,173.19.233.80:3714,65.182.97.15:5807,115.147.231.81:9751,72.134.30.181:15810,71.59.97.180:24295,74.76.84.250:25497,96.234.62.221:32344,69.44.246.38:42254,98.199.75.23:51230 GNUTELLA/0.6 200 OK So it seems that the malware has hooked into explorer.exe and hidden its self quite well as a Norton Scan doesn't pick anything up. I have looked in Windows firewall and it shouldn't be letting this traffic through. I have had a look into the messages explorer.exe is sending in Spy++ and the only related ones I can see are socket connections etc... My question is what can I do to look into this deeper? What does malware achieve by sending p2p traffic? I know to fix the problem the easiest way is to reinstall Windows but I want to get to the bottom of it first, just out of interest. Edit: Had a look at Deoendency Walker and Process Explorer. Both great tools. Here is a image of the TCP connections for explorer.exe in Process Explorer http://img210.imageshack.us/img210/3563/61930284.gif

    Read the article

  • Outlook express under RHEL 5 server

    - by Kumar P
    I am using RHEL 5 server as proxy server in Local network. Under server i have few windows machines. Now i want to configure Outlook express in windows boxes, When i configure and test connections, It showing connection failed. In browser, internet working well. Without proxy, windows outlook express configure well in windows boxes. And working well. What you think about it and How can i solve this problem ?

    Read the article

  • How do I notify Oracle that an IIS Worker Process is about to recycle?

    - by Brien
    I have an ASP.NET web application with an Oracle back end. The worker process recycling in IIS is set for 40 minutes, and when that occurs, the Oracle server sets a mutex lock while it cleans up all of its open connections. During this cleanup (up to a few minutes in duration), all DB requests get a timeout. Is there a way for IIS to notify Oracle that a worker process recycle is about to occur, so Oracle can be smarter about how it cleans up its resources without locking the entire database?

    Read the article

  • Redirect local service to custom proxy

    - by Pedro Laguna
    Hello, I'm trying to create a custom proxy program but I have a problem. My program connects to a fixed port from a random port and I need to tunnel all this traffic by my local proxy. I think the solution is using iptables, but all the topics I found are related to redirect incoming connections, not outbounds. How can I redirect all the traffic from a local port to another local port and later to the internet? Thanks,

    Read the article

  • Is there an equivalent command for 'init.d/networking restart' in OS X

    - by l0c0b0x
    From time to time, I've encountered issues with OS X clients' network connections (Wired and Wireless, Leopard/Snow Leopard) where nothing will fix the issue, until you reboot. Is there a particular 'network service/process' I should be watching out for? I was thinking it would be useful to know of a command that will reset a 'network connection' type service/process (same as running a sudo /etc/init.d/networking restart). Thanks!

    Read the article

  • Deny to administrators to change network configuration settings

    - by moronrats
    I need to provide admin rights to every user but the users should not able to change network configuration settings. For this I have enabled following policies in User Configuration\Administrative Templates\Network\Network connections Enable Windows 2000 network connection settings for administrators Prohibit access to properties of a LAN connection Prohibit access to properties of components a LAN connection Users (that exist in administrators) still can change the LAN properties. Are there any other solutions?

    Read the article

  • What other protocols must not be fire-walled for FTP to work?

    - by Chris
    my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

    Read the article

  • internet connection occasionally stops, but can still ping .com sites

    - by rj
    hi, every half hour or so, for 1-2 minutes my browser will stop navigating to sites, "waiting for ... to respond.." within 2 minutes i will be able to connect to sites and browse like normal again. weird thing is, while i cannot connect to sites, i get ping replies from any .com i type in. this happens on my home wireless network, using FF and IE on a win7 desktop AND FF on an ubuntu laptop the network is wpa2 secured, these are the only connections.

    Read the article

  • Problem with monitoring Glassfish with JConsole..

    - by Pavel
    I have enabled JMX connection on remote Glassfish server and then I've restarted it. During starting server notified: Standard JMX Clients (like JConsole) can connect to JMXServiceURL: [service:jmx:rmi:///jndi/rmi://myserver:8686/jmxrmi] for domain management purposes. Port 8686 is opened for connections. But I can't connect to server with JConsole.. It says: Connection failed. How can I solve this problem? Thanks in advance.

    Read the article

  • How to read haproxy stats page

    - by w00t
    Hello, For those of you using HAProxy along with the stats papge (haproxy?stats), how do I interpret this page? There is no decent explanation. For instance: Which Session column displays the number of currently active connections to the backend? Session or Sessions Rate?

    Read the article

  • Monitor ssh on non-default port with Nagios

    - by obvio171
    I just deployed Nagios on a Gentoo server and everything is fine except ssh, which it marks as "CRITICAL" because it's refusing connections. But that's because it's running on a port different from the default 22. How do I change it so that it monitors the right port?

    Read the article

  • vsFTPD mixed SSL and plain text mode

    - by stan31337
    Is it possible to configure vsFTPD to use Explicit FTP over TLS for all connections except those coming from 127.0.0.1? Joomla website is being hosted on a server, and it's unable to use FTPES, so I had to set: force_local_data_ssl=NO force_local_logins_ssl=NO But I want to force content managers to use FTPES, and I am unable to control whether they have chosen FTP or FTPES in their client's connection properties. Thank you!

    Read the article

  • Krusader on Linux

    - by Guus
    In Krusader you can create a New Network Connection (CTRL-N) How can I save those connections? Now I have to enter all details every time.

    Read the article

  • Unable to connect to MSN network with Adium

    - by Adam Driscoll
    I'm new to the Mac world and tried both MSN Messenger for Mac (7.0 and 8.0 beta) as well as Adium to connect to the Windows network. I've enable 'Allow all incoming connections' in the Firewall settings. Windows Live Messenger works fine when connecting through the same router on my Windows laptop. I've triple checked my password and verified it through a web browser and Windows Live. Any ideas what my issue could be?

    Read the article

  • How to route certain applications through a VPN and others to use my 'standard' connection in OSX 10.6?

    - by Alfie
    I am currently working abroad and use my company's VPN for FTP and some browsing. This is a relatively slow connection and while it is suitable for those VPN necessities; much of my other internet usage can be done without the VPN at a much higher speed. Is there a way to tell Safari and my FTP software to use the VPN and for all other connections to go directly to the internet. I am currently using OSX's Network Prefs for running my VPN connection. Ta

    Read the article

  • Are FC and SAS DAS devices standard enough?

    - by user222182
    Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

    Read the article

  • Fortigate 80C multi wan

    - by emamdouh
    I've Fortigate 80c and two internet lines from two separate ISPs. I'm trying to distribute sessions between both internet lines following http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/routing_ecmp_basic.html , but it seems connections go through just one of two internet lines. I have "wan1 as it's configured first, and I could edit static route table to be wan2 instead of wan1", but not both of internet lines I have. Any ideas why this happens? Thanks in advance

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • How do you keep track of what's connected to your switches?

    - by Kamil Kisiel
    Currently we manually document the connections to the ports of our switches. Of course, maintenance is a chore, and the documentation is out of date as soon as you save it. Are there any tools for querying switches, preferably via SNMP, that can tell you what is connected on the other end? For the record, we use primarily HP ProCurve switches.

    Read the article

  • NetworkManager applet looks like it can't see network

    - by amorfis
    My system is Ubuntu 9.04. There is NetworkManager applet, but it looks like there are no networks. When I click it, there is disabled menu "Wired Network/device not managed". I have working eth0 interface, internet is working fine and I can see eth0 in ifconfig When I right-click and choose "Edit connections", there is only "Auto vboxnet0" under "Wired" tab. No "eth0". It shouldn't be a problem, but I cannot connect to VPN because of this :(

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >