Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 62/567 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Error "fixing recursive fault but reboot is needed"

    - by Gordon
    I am trying to install ubuntu for the first time. (long time windows user, first time linux!) Version = 11.04 Hardware = Acer Travelmate 4050 I can boot from USB or CD and it loads fine I have installed and reinstalled several times from both USB and CD and it completes correctly However, when I boot from the HDD I get the above error I don't see any errors like "kernel panic" mentioned elsewhere It happens whether I boot with AC adapter in or out and also with adapter in but battery out Not sure how to get further info to help with diagnosis Suggestions?

    Read the article

  • Unable to boot post upgade to 12.10 from 12.04 on a dial boot PC

    - by Prateek
    I have a dual boot PC with Win7 and Ubuntu. Last night I upgraded from 12.04 to 12.10 and since then I have not been able to boot and PC goes into grub rescue with error "File not found" I have tried the below steps set prefix=(hd0,msdos5)/boot/grub/i386-pc/ set root=(hd0,msdos5) insmod normal ( i get error symbol not found : 'grub_disk_dev_list'. when I try linux /boot/vmlinuz-3.2.0-32-generic root=/dev/sda5 ro (i get error - command not found 'linux' ) same for initrd I am not able to find out what sdXX to set also.

    Read the article

  • boot up fails. drops to initramfs prompt 12.04

    - by dpm
    I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

    Read the article

  • Formatted Ubuntu partition & now grub says "error: no such partition" - can't enter windows

    - by qwBJ
    I had installed Ubuntu (current version: 11.xx) alongside Windows Vista. Now I formatted the Ubuntu partition & merged it with another partition (without thinking, obviously). Now, when I restart the computer, GRUB probably tries to find the old partition (which does no longer exist) and says: error: no such partition. grub rescue> Now I dont know what to do (I'm a total beginner). I tried to re-install Ubuntu on the newly formatted partition but this won't work, because after removing the install-usb (which I am said to do during installation) I find the above error-message again. I guess I need some way to reconfigure grub OR to reinstall grub/ubuntu (on the newly formatted partition) OR to reinstall the windows boot manager (without reinstall. Windows), but I have no idea how to do either of these things.

    Read the article

  • iMac goes black, makes clicking sound... thoughts?

    - by Josh
    This is the second time this has happened. The display on my Apple iMac (20-inch Late 2006) just went black, system was completely unresponsive to mouse/keyboard input, I could not SSH into nor ping the machine, and it didn't show up in ARD. I could hear a fairly loud clicking noise from inside which sounded like the DVD drive trying to seek -- but there is no disc in the drive. It could possibly be the hard drive... I pressed the power button and the system powered off, and now will not power on again. Thoughts / suggestions as to next course of action?

    Read the article

  • `power/persist` file not found in USB device sysfs directory

    - by intuited
    The file /usr/share/doc/linux-doc/usb/persist.txt.gz mentions that the USB-persist capability can be enabled for a given USB device by writing 1 to the file persist in that device's directory in /sys/bus/usb/devices/$device/power. This is said — if I understood correctly — to allow mountings of volumes on the drive to persist across power loss during suspend. However, I've discovered that the device I'd like to enable this facility for — a USB hard drive — does not have such a file in its corresponding directory, and that attempts to create it are rebuffed. Is there perhaps a kernel module that needs to be loaded for this to work? Do I need to build a custom kernel? I'm running ubuntu 10.10.

    Read the article

  • How long does boot repair take?

    - by Emre
    Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

    Read the article

  • Doesn't boot after installation

    - by jchysk
    Downloaded Ubuntu 12.04.1-alternate-amd64 Installed to USB stick Integrity check fails on ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default but that seems to be a known bug where the file isn't included in the alternative 64-bit ISO and shouldn't affect installation. I ignore it and proceed on. For partitioning on 2 SSD Drives: Partition 300MB and 63GB on both RAID1 the 300MB and 63GBs Set the 300MB to EXT4 on /boot Encrypt the rest as MD1 and set it for LVM Create two volumes from MD1: 4GB swap and 59GB to / I go through the installation and get to the point where it says everything is ready and to take the media out so as to boot from the drives I receive the error "Error: No video mode activated." on startup I've read that this can be solved by running "cp /usr/share/grub/*.pf2 /boot/grub" and then updating grub but I can't get to a place where I can actually run this command. In rescue mode I can get to a shell from installer with /boot mounted to /target. So from there I can run "cp /cdrom/boot/grub/font.pf2 /target/grub/" but can't figure out a way to get it to update grub after that or know how what to change in manually updating the grub.cfg file. If I try other devices to mount the root filesystem I get the error "An error occurred while mounting the device you entered for your root file system". It just sits on the video mode error and doesn't progress further. Googling around it seems like people see the error briefly before it continues booting, not getting stuck on it the way I am which leads me to believe that error may be unrelated to Ubuntu not booting. So any ideas as to what I should try next or what needs to be done to install Ubuntu and get it to boot would be helpful.

    Read the article

  • How to reset settings when Unity won't finish booting?

    - by Emre
    I have a new 12.04 installation and I messed things up after trying to move /home to an NTFS partition, which I later learned was a bad idea. I removed references to the NTFS partition on fstab and created new users on the ext4 / partition. Now I can't get Unity to start up properly for any user. I get the GUI with only three Launch icons (none of which are clickable) and no bar at the top. The keyboard seems to the nonfunctional after I enter my credentials. The interesting thing is that I can boot when I go through recovery mode and select resume. I wonder whether I am creating the new users properly. What is the correct protocol for doing so in order to ensure that they can run Unity?

    Read the article

  • Communication between state machines with hidden transitions

    - by slartibartfast
    The question emerged for me in embedded programming but I think it can be applied to quite a number of general networking situations e.g. when a communication partner fails. Assume we have an application logic (a program) running on a computer and a gadget connected to that computer via e.g. a serial interface like RS232. The gadget has a red/green/blue LED and a button which disables the LED. The LEDs color can be driven by software commands over the serial interface and the state (red/green/blue/off) is read back and causes a reaction in the application logic. Asynchronous behaviour of the application logic with regard to the LED color down to a certain delay (depending on the execution cycle of the application) is tolerated. What we essentially have is a resource (the LED) which can not be reserved and handled atomically by software because the (organic) user can at any time press the button to interfere/break the software attempt to switch the LED color. Stripping this example from its physical outfit I dare to say that we have two communicating state machines A (application logic) and G (gadget) where G executes state changes unbeknownst to A (and also the other way round, but this is not significant in our example) and only A can be modified at a reasonable price. A needs to see the reaction and state of G in one piece of information which may be (slightly) outdated but not inconsistent with respect to the short time window when this information was generated on the side of G. What I am looking for is a concise method to handle such a situation in embedded software (i.e. no layer/framework like CORBA etc. available). A programming technique which is able to map the complete behaviour of both participants on classical interfaces of a classical programming language (C in this case). To complicate matters (or rather, to generalize), a simple high frequency communication cycle of A to G and back (IOW: A is rapidly polling G) is out of focus because of technical restrictions (delay of serial com, A not always active, etc.). What I currently see as a general solution is: the application logic A as one thread of execution an adapter object (proxy) PG (presenting G inside the computer), together with the serial driver as another thread a communication object between the two (A and PG) which is transactionally safe to exchange The two execution contexts (threads) on the computer may be multi-core or just interrupt driven or tasks in an RTOS. The com object contains the following data: suspected state (written by A): effectively a member of the power set of states in G (in our case: red, green, blue, off, red_or_green, red_or_blue, red_or_off...etc.) command data (written by A): test_if_off, switch_to_red, switch_to_green, switch_to_blue operation status (written by PG): operation_pending, success, wrong_state, link_broken new state (written by PG): red, green, blue, off The idea of the com object is that A writes whichever (set of) state it thinks G is in, together with a command. (Example: suspected state="red_or_green", command: "switch_to_blue") Notice that the commands issued by A will not work if the user has switched off the LED and A needs to know this. PG will pick up such a com object and try to send the command to G, receive its answer (or a timeout) and set the operation status and new state accordingly. A will take back the oject once it is no longer at operation_pending and can react to the outcome. The com object could be separated of course (into two objects, one for each direction) but I think it is convenient in nearly all instances to have the command close to the result. I would like to have major flaws pointed out or hear an entirely different view on such a situation.

    Read the article

  • How to use BT or emule across 2 or more hard drives?

    - by the searcher
    One difficulty with BT or emule is that, when the hard drive is full, we constantly need to move older files to a new hard drive so that we can download newer files. We can change BT or emule's setting so that the folder for downloading points to the new hard drive, but then, what if emule haven't finished downloading for some files that are hard to find, and it is 92% done... in that case, we would like to keep the old setting so that when the last 8% arrives, it can go into the correct file. (and same for BT, if we haven't finished some file or if we want to seed something later). So is there a good way to let BT or emule point to 2 hard drives, or somehow let the new hard drive "merge" into the existing hard drive / folder?

    Read the article

  • ubuntu stuck in a login loop after editing profile file

    - by varunit
    I'm stuck in a login loop now. What I did was edited /etc/profile as root and added the following line export PATH = /opt/my jdk 7 path/bin:$PATH After logging out and tried to login, I cannot I have tried booting in recovery mode, entered root prompt and tried to edit the file in vi but it always opens in read only mode and hence cannot be saved. I just need a way to delete that line and boot into ubuntu again. Please help me out guys..

    Read the article

  • Information about SATA, IDE (PATA) controllers

    - by Adam Matan
    I have a remote computer on which I want to install a new hard drive for rsync backup. The problem is, I don't know what controller technology is used (PATA, SATA, SATA2, ...) and how many available slots are left. I want to spare me an unnecessary drive just for opening the chassis and looking into wires. How do I query the SATA or PATA controllers? I'm interested in the following points: Which controllers exist in the machine How many (and which) disks are attached to each controller How many available slots are there

    Read the article

  • Windows7 Gone after Ubuntu dual boot install

    - by Adi
    I had a very hard time to dual boot install Ubuntu 12.04 Apparently, Ubuntu has restriction of 4 partitions and I already had 4, so it just couldn't recognise my partitions. This was something I realised too late, but finally got to install Ubuntu. Now, even though Windows 7 option is listed when I try to boot my laptop, it doesn't really let me boot and just loops back to begin. I tried windows repair DVD also, didn't work. I was fine with complete fresh install of windows too, but Windows CD didn't detect my Hard Disk Drive or any partitions (even though the original C drive with Windows is still an NTFS partition, according to gParted, and I can access the data from same using Ubuntu log in). My Ubuntu works fine, but I need windows log in also. Any suggestions anyone?

    Read the article

  • Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

    - by simpleton
    I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

    Read the article

  • best data+partition recovery software

    - by Pennf0lio
    I accidentally formatted my Drive D that contained all my Backups and Documents. I separated my files to my Drive D hoping I will not harm my files. Since I use Acronis Recovery to Install a new OS with some pre-installed application to my HDD I didn't realize I also formated/erase my Drive D. Now my drive D is unpartitioned. I am really in really in deep trouble and would need some urgent help, Please recommend a Software that at least can restore my Old Drive that contained my files. I'm assuming most of you think this is a duplicate of some old questions here, But I'm not looking for data recovery, I need to recover the whole partition with the files. I used to use "Recuva" but It only recovers files not the whole folders with the files in it. Please advice. Thank You!

    Read the article

  • "The disk drive for / is not ready yet or not present" message on boot

    - by MHS
    After upgrading my Ubuntu machine from ver. 11.10 to 12.04, I get the following error and the machine stop working before any graphical environment: ** (plymouthd:357): WARNING **: Command line `dbus-launch --autolaunch=530c973a1fe4d1e1e6bd... --binary-syntax --close-stderr' exited with non-zero exit status 1: Autolaunch error: X11 initialization failed.\n udevd[397]: specified group 'colord' unknown The disk drive for / is not ready yet or not present. Continue to wait, or Press S to skip mounting or M for manual recovery. Any help appreciated.

    Read the article

  • Ubuntu - Black Screen After Suspend

    - by EssAm
    I used Ubuntu with no problems and I upgraded to 11.10 and everything was fine. But when I did my first suspend I was not able to boot again, all I got was a black screen no bios screen, nothing just blank, I tried doing hard reset but when I power on again same happens. I tried ctrl+alt+delete F1-F12 but i think the keyboard is not working, also tried booting from CD but all I got was blank screen, the hard disk light is not blinking at all so i'm assuming it's not trying to boot. My laptop is Toshiba satellite with ATI Radeon graphics. Hibernate was working fine though. I searched the net for solutions but with no luck. Any ideas?

    Read the article

  • How to recover after embarrassing yourself and your company?

    - by gaearon
    I work in an outsourcing company in Russia, and one of our clients is a financial company located in USA. For the last six months I have been working on several projects for this particular company, and as I was being assigned a larger project, I was invited to work onsite in USA in order to understand and learn the new system. Things didn't work out as well as I hoped because the environment was messy after original developers, and I had to spent quite some time to understand the quirks. However we managed to do the release several days ago, and it looks like everything's going pretty smooth. From technical perspective, my client seems to be happy with me. My solutions seem to work, and I always try to add some spark of creativity to what I do. However I'm very disorganized in a certain sense, as I believe many of you fellas are. Let me note that my current job is my first job ever, and I was lucky enough to get a job with flexible schedule, meaning I can come in and out of the office whenever I want as long as I have 40 hours a week filled. Sometimes I want to hang out with friends in the evening, and days after that I like to have a good sleep in the morning—this is why flexible schedule (or lack of one) is ideal fit for me. [I just realized this paragraph looks too serious, I should've decorated it with some UNICORNS!] Of course, after coming to the USA, things changed. This is not some software company with special treatment for the nerdy ones. Here you have to get up at 7:30 AM to get to the office by 9 AM and then sit through till 5 PM. Personally, I hate waking up in the morning, not to say my productivity begins to climb no sooner than at 5 o'clock, i.e. I'm very slow until I have to go, which is ironic. Sometimes I even stay for more than 8 hours just to finish my current stuff without interruptions. Anyway, I could deal with that. After all, they are paying for my trip, who am I to complain? They need me to be in their working hours to be able to discuss stuff. It makes perfect sense that fixed schedule doesn't make any sense for me. But it does makes sense that it does make sense for my client. And I am here for client, therefore sense is transferred. Awww, you got it. I was asked several times to come exactly at 9 AM but out of laziness and arrogance I didn't take these requests seriously enough. This paid off in the end—on my last day I woke up 10 minutes before final status meeting with business owner, having overslept previous day as well. Of course this made several people mad, including my client, as I ignored his direct request to come in time for two days in the row, including my final day. Of course, I didn't do it deliberately but certainly I could've ensured that I have at least two alarms to wake me up, et cetera...I didn't do that. He also emailed my boss, calling my behavior ridiculous and embarrassing for my company and saying “he's not happy with my professionalism at all”. My boss told me that “the system must work both in and out” and suggested me to stay till late night this day working in a berserker mode, fixing as many issues as possible, and sending a status email to my client. So I did, but I didn't receive the response yet. These are my questions to the great programmers community: Did you have situations where your ignorance and personal non-technical faults created problems for your company? Were you able to make up for your fault and stay in a good relationship with your client or boss? How? How would you act if you were in my situation?

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • "merging" multiple hardrives for Ubuntu 14.04 install

    - by Thijser
    I have 3 hardrives inside my laptop 2 of which currently house other opperating systems but have a empty partitions of 8 and 9 gigabye and the third is just 12 gB (currently not partitioned at all). Now each of these 3 is to small to be useful to me, however combined they are 29gigs which can easily hold a ubuntu installation, and associated programs. Is there a way set up my installation in such a way that it threads these 3 disks as one? Or is there a way by which I can make it default storage of many things into one drive (downloads and sudo apt-get install for example) to one drive while keeping ubuntu onto another?

    Read the article

  • Ubuntu wont boot after installing Windows 8

    - by brian
    Ubuntu wont boot up after I installed Windows 8. I get this error: Windows Failed to start. "A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer. Choose your language settings, and then click "next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr status: 0xc000000f

    Read the article

  • Retro Ad – 10 MB Hard-Drive for $3398 [Image]

    - by Asian Angel
    This is definitely one hard-drive (and price) that you will not be feeling nostalgic over! View the Full-Size Version of the Ad (Image) The Hard Disk you’ve been waiting for. [via Fail Desk] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

    Read the article

  • Access secondary hard disk from Virtual Machine

    - by Frank V
    I have a fairly specific question. I had Ubuntu on my Laptop (for years). For a variety of reasons, I've had to switch to Windows but the computer has two hard drives. The main drive was reformatted and I've installed windows. The second hard drive still has the Linux system disk format (not sure on type). Obviously, windows can't access it but can I access it from a Virtual machine (VirtualBox) or will I need to load up a Live-Session to access / move the contents? Edit: If this is possible, how would one proceed to mount the disk?

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >