Search Results

Search found 2253 results on 91 pages for 'grep'.

Page 62/91 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• How should I determine if a user is logged in graphically while lightdm is running?

  - by Jack

  I want to know if someone is logged into a local X-session. In the past I looked at the output of ck-list-sessions. The output looked something like this: Session12: unix-user = '[redacted]' realname = '[redacted]' seat = 'Seat1' session-type = '' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T18:17:55.553236Z' login-session-id = '4294967295' If no one was logged in, there was no output. I checked if someone was logged in with ck_result" string => execresult("/usr/bin/ck-list-sessions | /bin/grep x11 | /usr/bin/cut --delimiter=\\' -f 2 | /usr/bin/wc -w This no longer works, because lightdm greeter looks like a logged in user Session12: unix-user = '[redacted]' realname = 'Light Display Manager' seat = 'Seat1' session-type = 'LoginWindow' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T22:17:55.553236Z' login-session-id = '4294967295' I guess I could check session-type, but I don't know how to do that and check x11-display in one-liner. I then need to write my own script, but at that point I thought I would check if anyone else has already done the work or if there is a way to get ConsoleKit to tell me what I want (or if I should be using a different tool)?

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• dist-upgrade runs and completes but current kernel stays the same

  - by jaguare22

  I think that my system is staying at an older kernel version. It seems to update when I run dist-upgrade but the current kernel version doesn't change. Is it possible the system is set to install new kernel updates but only load an older version at start up? $ uname -a Linux HTPC 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:32:50 UTC 2012 i686 athlon i386 GNU/Linux $ dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-32-generic-pae 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-32-virtual 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 Virtual Guests dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' linux-headers-3.2.0-36 linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-37 linux-headers-3.2.0-37-generic-pae linux-headers-3.2.0-38 linux-headers-3.2.0-38-generic-pae linux-headers-3.2.0-39 linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-40 linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-41 linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-43 linux-headers-3.2.0-43-generic-pae linux-headers-3.2.0-44 linux-headers-3.2.0-44-generic-pae linux-headers-3.2.0-45 linux-headers-3.2.0-45-generic-pae linux-headers-3.2.0-48 linux-headers-3.2.0-48-generic-pae

  Read the article

• Unsure about TRIM enabled on my SSD

  - by user84750

  I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• Is there a way to make catalyst driver work in Trusty for the radeon hd4330?

  - by Laurent BERNABE

  Though official Catalyst software 13.1 is suitable for ati radeon hd4330, it can't be installed on Ubuntu 14.04 as it can't support Xorg = 7.6 As I need proprietary drivers for trusty, I would like to know if there is a way to bypass this limitation ? (For example by fetching driver sources) Here are some results from the terminal : $ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux bordeaux80 3.13.0-27-generic #50-Ubuntu SMP Thu May 15 18:06:16 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-27-generic root=UUID=4015e6f7-d11a-45fd-ac9b-5b6c7ab9eaa0 ro quiet splash vt.handoff=7 Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. $ xrandr Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 353mm x 198mm 1366x768 60.0*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 VGA-0 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) $ uname -rp 3.13.0-27-generic x86_64 $ glxinfo | grep OpenGL OpenGL vendor string: X.Org OpenGL renderer string: Gallium 0.4 on AMD RV710 OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.1.0 OpenGL core profile shading language version string: 1.40 OpenGL core profile context flags: (none) OpenGL core profile extensions: OpenGL version string: 3.0 Mesa 10.1.0 OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL extensions: Regards

  Read the article

• Error: kernel headers not found. (But they are in place)

  - by Guandalino

  I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

  Read the article

• Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus?

  - by george rowell

  ref: Close button on notify-osd? Bookmark: Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus? Currently, this script dbus-monitor "interface='org.freedesktop.Notifications'" | \ grep --line-buffered "member=Notify" | \ sed -u -e 's/.*/killall notify-osd/g' | \ bash will kill all pending notifications. It would be better to finesse the specific target OSD notification to cancel, by using org.freedesktop.Notifications.CloseNotification(uint id). Is there an interface method that can put this on (in?) the DBus to fire when a particular notify event occurs? The method will need to get the notify PID to use as the argument for CloseNotification(uint id). Alternatively, qdbus org.freedesktop.Notifications \ /org/freedesktop/Notifications \ org.freedesktop.Notifications.CloseNotification(uint id) could be used from the shell, if the (uint id) argument could be determined. The actual command syntax would use an integer in place of (uint id). Perhaps a better question to ask first might be "How is the DBus address for a notification found?". In hindsight the previous question "How is the (uint id) for a notification found?" is rhetorical! This previous answer: http://askubuntu.com/a/186311/89468 provided details so either method below can be used: gdbus call --session --dest org.freedesktop.DBus \ --object-path / \ --method org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: (uint32 8957,) or qdbus --literal --session org.freedesktop.DBus / \ org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: 8957

  Read the article

• How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

  - by racerror

  My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

• 1080p Screen resolution problem after 10.04 to 12.04 update

  - by Ale

  I have a Samsung LCD 40" with a NVidia GeForce 6150SE nForce 430 Card. I recently upgraded from 10.04 to 12.04 and the best resolution I can get is 1360x768. I've tried the propietary drivers available on the repository kmod:nvidia_current kmod:nvidia_173_updates kmod:nvidia_current_updates kmod:nvidia_96 kmod:nvidia_96_updates kmod:nvidia_173 I've also downloaded latest from NVidia's Web, version: 295.40. But still no luck. With Nouveau driver, I can only get 1024x768. I know there is no problem with my hardware (video card, cable and monitor), I was using it perfectly on 10.04. Can anybody suggest something else I could try, to get my 1920x1080 resolution back? Thanks in advance. Here are some more information, that I got reading other similar posts on askubuntu. $ lspci | grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1360 x 768, maximum 1360 x 768 default connected 1360x768 0 0 0mm x 0mm 1360x768 50.0 52.0* 1024x768 51.0 800x600 53.0 54.0 55.0 680x384 56.0 57.0 640x480 58.0 576x432 59.0 512x384 60.0 400x300 61.0 62.0 63.0 320x240 64.0

  Read the article

• why doesn't my computer resume after sleeping overnight?

  - by bamdad

  i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

  Read the article

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• I can't hear any sounds on ubuntu 11.10 on Dell inspiron N5010

  - by Ahmed

  I have a problem that I can't hear any sounds and I don't know where to start. I did the following : lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at fbf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at fbe40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel And It seems that I have 2 soundcards. Is that normal ?? I also did this: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Also on the sound setting GUI. I have 2 hardware profiles for sound cards but none of them works when I test the speakers. Where should I start searching ?

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Use crontab scheduling java application problem occurs

  - by koma

  The main method to start the java application. The main method initialize the log, and then determine whether the process is running. Every 10 minutes, scheduled to run through the linux crontab. Able to determine that the 10 minutes of this program must end. Under normal circumstances, will print the following log The beginning of the implementation of 10 minutes The end of the 10 minutes of normal The beginning of the implementation of 20 minutes The end of the 20 minutes of normal The beginning of the implementation of 30 minutes The end of the 30 minutes of normal ..... But now this situation: The beginning of the implementation of 10 minutes The end of the 10 minutes of normal Execution starts in 30 minutes, but detected already have a process in operation, the program exits. Start the execution of 40 points, but detected already have a process in operation, the program exits. ..... Very strange 20-minute log does not print, but the 20-minute program has been launched by the ps-ef | grep java view java thread, found in a 20-minute thread is locked. But why not see the log Check the linux dispatch log, not see scheduling a 20-minute log.

  Read the article

• Dim (NEARLY blank) laptop screen, secondary screen works - why?

  - by LIttle Ancient Forest Kami

  My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

  Read the article

• Intermittent sound on an Medion Akoya S5610

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• How to reset the language of the package descriptions

  - by xubuntix

  I have had German as my main language about a year ago. Later I changed it to English. Most parts of the system accepted the change. The notable exceptions are the package descriptions, which remain in German for some packages. You can see in the image (apt-cache and software-center), that while some descriptions are in English, some have remained in German. So the question is: how do I reset this? I guess that there is somewhere a description cache that needs to be told that it should update all descriptions? EDIT: As asked: the output of some language related commands: $ cat /etc/default/locale LANG="en_US.UTF-8" $ apt-config dump | grep Lang Acquire::Languages ""; Acquire::Languages:: "de_DE"; Acquire::Languages:: "de"; Acquire::Languages:: "en"; Acquire::Languages:: "none"; $ locale LANG=de_DE.UTF-8 LANGUAGE=en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= As a note: I'm not sure what each entry means, but some of the de_DE.UTF-8 are probably ok, since I do want paper-sizes, monetary, time, etc. in standard German formats.

  Read the article

• Ubuntu NTP issues

  - by Anups

  I am trying to setup the NTP server on Ubuntu machine. Am breaking my head in this particular issue. Getting an error ntpdate[5005]: no server suitable for synchronization found when doing the command ntppdate. Can anyone please help me out in this? /etc/ntp.conf: server 0.ubuntu.pool.ntp.org server 1.ubuntu.pool.ntp.org server 2.ubuntu.pool.ntp.org server 3.ubuntu.pool.ntp.org Also when I gave command netstat -anltp | grep "LISTEN" tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1816/dnsmasq tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 939/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1013/cupsd tcp 0 0 127.0.0.1:39558 0.0.0.0:* LISTEN 5529/rsession tcp 0 0 0.0.0.0:902 0.0.0.0:* LISTEN 1275/vmware-authdla tcp 0 0 127.0.0.1:47304 0.0.0.0:* LISTEN 5822/rsession tcp6 0 0 :::80 :::* LISTEN 1400/apache2 tcp6 0 0 :::22 :::* LISTEN 939/sshd tcp6 0 0 ::1:631 :::* LISTEN 1013/cupsd So what should I do so that it listens on 123? If I get output as PORT STATE SERVICE 123/udp open ntp If I give command nmap -p 123 -sU -P0 192.168.36.198, it means UDP is open right? Then why doesn't it show in the command to to show listening ports?

  Read the article

• Can't get Unity 3D to work in 11.10

  - by pmoseph

  I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

  Read the article

• aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

  - by nimasmi

  I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

  Read the article

• Eliminating zero-length files

  - by RhZ

  I have been having multiple crashes recently. 4-5 last night within a few hours. I posted about it before, and got an answer but not sure how to proceed. The messages in my logs right before the crash are multiple complaints about valid eCryptfs headers. But the chron might not be related, I don't think I saw that in previous crashes: xxx-desktop kernel: [ 1112.274474] Valid eCryptfs headers not found in file header region or xattr region, inode 32376924 xxx-desktop CRON[4212]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) So I was sent to an answer providing this script: for i in find $(mount | grep " on $HOME type ecryptfs" | awk '{print $1}') -size 0c; do if ! fuser -v $i; then rm -f $i fi done I did find some zero byte files, not in the exactly right place (a folder called .private as I remember), but I need to fix this, its too bad right now. So I need to delete any of them that are not in use. I am a little too clueless, can someone walk me through executing this script? I don't know how.

  Read the article

• Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

  - by user100987

  When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >