Search Results

Search found 14028 results on 562 pages for 'online storage'.

Page 62/562 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Windows 7 hangs with 100% disk activity but only when online

    - by jeremy
    I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

    Read the article

  • Client-based program to track response time for online webservice

    - by Søren Haagerup
    I am helping a customer with general IT support, and they have a problem with a hosted web-based system being slow. The provider of the system blames the client's computer, and the client calls me for help. I blame the provider, but it is hard to get them to do something about it without rock-solid evidence. And every time the provider comes around for a TeamViewer session, everything of course runs smoothly. Does there exist a client program or browser plugin that tracks statistics about response time for specific web services?

    Read the article

  • Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

    - by charfeddine.ahmed
    Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

    Read the article

  • How ZFS handles online replacement in a RAID-Z (theoretical)

    - by Kevin
    This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

    Read the article

  • "must issue a starttls command first" when MSSQL emails via Microsoft Online

    - by David
    I have written a stored procedure in MSSQL Server 2008 R2 which sends emails when my Application logs errors. It works fine on servers at our office but when I ran it on our remote servers I got must issue a starttls command first So maybe there is a setting somewhere which is different between the two servers, and that's why it's working on one and not the other. How do I set the server so that it issues a "starttls commaned first"?

    Read the article

  • Distributed storage and computing

    - by Tim van Elteren
    Dear Serverfault community, After researching a number of distributed file systems for deployment in a production environment with the main purpose of performing both batch and real-time distributed computing I've identified the following list as potential candidates, mainly on maturity, license and support: Ceph Lustre GlusterFS HDFS FhGFS MooseFS XtreemFS The key properties that our system should exhibit: an open source, liberally licensed, yet production ready, e.g. a mature, reliable, community and commercially supported solution; ability to run on commodity hardware, preferably be designed for it; provide high availability of the data with the most focus on reads; high scalability, so operation over multiple data centres, possibly on a global scale; removal of single points of failure with the use of replication and distribution of (meta-)data, e.g. provide fault-tolerance. The sensitivity points that were identified, and resulted in the following questions, are: transparency to the processing layer / application with respect to data locality, e.g. know where data is physically located on a server level, mainly for resource allocation and fast processing, high performance, how can this be accomplished? Do you from experience know what solutions provide this transparency and to what extent? posix compliance, or conformance, is mentioned on the wiki pages of most of the above listed solutions. The question here mainly is, how relevant is support for the posix standard? Hadoop for example isn't posix compliant by design, what are the pro's and con's? what about the difference between synchronous and asynchronous opeartion of a distributed file system. Though a synchronous distributed file system has the preference because of reliability it also imposes certain limitations with respect to scalability. What would be, from your expertise, the way to go on this? I'm looking forward to your replies. Thanks in advance! :) With kind regards, Tim van Elteren

    Read the article

  • Plug and Go NAS Storage

    - by graham.reeds
    My wife and I are separating. One of the things we need to extricate is the media we have accumulated over the years. So I am looking for a NAS solution that is a) relatively low-cost, b) reliable and c) easy for a non-geek to use (I don't want to be tech support). All it needs to do is hold our iTunes library, photos, course work and maybe some movies and TV shows that I currently have. She will be connecting via her Netbook. I have seen this thread but the reviews on Amazon aren't particularly favourable. Due to the need for simplicity, WHS and FreeNAS are none-starters. I need redundancy as if a single drive system was to die then she would lose her course work and photos. Is the ReadyNAS the only real solution out there?

    Read the article

  • Tape vs SSDs backups regarding long-term storage reliability

    - by user66131
    My question is very specifically about solid state drives, not regular hard drives. I would like to put in place a grandfather-father-son backup scheme, with the SSDs being used for the grandfather and father portions, and the yearly grandfather would be locked in a safe offsite for maybe 5-10 years. Can I expect that after this period of time the data would be preserved as well as it would be on a tape?

    Read the article

  • Data transfer speed to USB storage connected to wifi router very slow

    - by RonakG
    Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

    Read the article

  • Installing windows xp from a removable storage

    - by objectiveME
    Hello,i want to install windows xp from my flash disk but upon running DISKPART and LIST PART my flash disk is not being listed.I soon find out its not supported on another forum.I tried unet bootin but i dont want to go that route.I have learn't that i can make my flash disk appear a hard drive but i am not sure since i have never done this before. I am following this tutorial: http://www.intowindows.com/how-to-install-windows-7-rc-on-acer-aspire-one-netbook/ If i present a usb stick as a hard drive,will i be able to install xp now?.

    Read the article

  • Storage of various linux config files

    - by stantona
    I'm using git to track/store all my various config files required for linux. They're organized as if they live in my home directory, eg: .Xresources .config/ Awesome rc.lua .xmodmap .zshrc vim/ <- submodule emacs/ <- submodule etc I use git submodules for other things like vim/emacs configuration (since I also want to keep those separate repos). I'm thinking of creating a shell script to create the various links to these files. The goal is to make it easier to setup another linux painlessly. Is this a reasonable idea? Is there a preferred approach? I'm mostly interested in hearing how others people store their configs.

    Read the article

  • How Is A SAN Storage Device Managed? [closed]

    - by slickboy
    Apologies if this is a stupid question but my only previous experience with SAN technology is using a SAN virtualisation tool (StarWind iSCSI SAN Free). This tool comes with a management interface that allows for iSCSI targets to be configured on the simulated SAN that can then be accessed. My question is basically: How is physical SAN device managed? Is an operating system required to be installed on the SAN device and then managed via software? Or can it be managed remotely via an application with no OS on the device? Thanks for any help.

    Read the article

  • Linux data storage and partitioning

    - by Rajeev
    In the following output of df -h you can see that i have added a new hard drive(/dev/hdd1) and have mounted as /hdd1. My question is if I start dumping data to /opt will that data be mounted in /hdd1 or / My goal is to utilise the new hdd1 instead of old disk(/dev/sda3). How can this be done? Filesystem Size Used Avail Use% Mounted on /dev/sda3 442G 312G 12G 86% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 57M 128M 31% /boot /dev/sdb1 1.7T 201M 2.6T 1% /hdd1

    Read the article

  • Tool to edit the online pages

    - by doug
    hi there When i read something I need to underscore what i like, or what i think is important, and to take notices about that read, near on that current paragraph. Soo, does anyone know a firefox addon or something else(other browser, any other application) which can provide me such a functionality? ps: I've tried some research tools as zotero, but it is not what I'm looking for.

    Read the article

  • Hard Disk based storage library

    - by Ryan M.
    We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

    Read the article

  • Not enough storage is available to process this command

    - by Mohit
    I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

    Read the article

  • migrating storage to a different controller

    - by bellocarico
    Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

    Read the article

  • Running RAID on an internal storage drive

    - by Johnny W
    I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

    Read the article

  • Password History Storage and Variability Comparison

    - by z3ke
    I believe this situation would be similar to many others out there, so maybe some of you can shed some light... Supposedly, when making password changes through MS exchange every 90 days, you cannot use any simple variation of one of your old passwords, up to whatever limit the admin's set for a system. My question: If your previous passwords are only stored as hashes, how can they check for the "just changed one letter" case. Wouldn't they have to have access to the old plain-text passwords in order to make those comparisons? The only other thing I can think of is if upon original creation of a password, they also stored all other one character permutations of it, so that they can be banned later?

    Read the article

  • Exchange Online - granting admin rights on a multi-domain account

    - by user1571299
    I'm the admin of a handful of domains on Office 365. The thing is some of my clients would like to manage their mailboxes by themselves. So I started looking into it and the closest I got was this page: http://community.office365.com/en-us/forums/158/p/20912/98083.aspx I created a Group Role with a Write Scope according to that post. I also assigned the Reset Password, Recipiants Creation, Mail Recipients and Distribution Groups rolls. But unfortunately that just doesnt work. The user in question is still unable to manage anything. Any suggestions?

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >