Search Results

Search found 30537 results on 1222 pages for 'google toolbox for mac'.

Page 624/1222 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• Will unbinding a server to an Open Directory Master remove its own file shares

  - by scape

  According to this article: http://support.apple.com/kb/TS3180?viewlocale=en_US I am required to remove the ldap binding of my second Mac OS X Lion server before I set it up as a replica server. I initially set the server up as a replica, or so I thought, and created file shares (it refers to the first server's ACL) before I realized it was never promoted as a replica server. So as of now it's running and shares files with correct ACL permissions but if the Master goes down all the file shares seize up. I want to set it up as a replica so this is not an issue; however, I don't want to lose the file shares and their permissions as I remove the binding and restart the server-- apparently I must remove the ldap binding to the OD Master (also a Mac OS X Lion server) before setting it up as a replica.

  Read the article

• Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

  - by user1444233

  I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

  Read the article

• Laptop Suggestions and Alternatives [closed]

  - by Pennf0lio

  Hi, I need some suggestions and alternatives in buying laptops. Me and my Girlfriend are planning to buy laptops. Her budget is $600 and mine is $850. We both love apple products, because of it's elegant design and yet powerful. But we can't yet afford mac laptops.. so we are looking for alternatives. One we see is The Stylish Sony E-Series (white version) see it here. To give you an Idea, Software she frequently use are Photoshop, MS Office and firefox. Mine is Adobe CS4, Cinema4d, MS Office and firefox. We are looking for light, slick and clean interface of a laptop (very close to mac notebooks). Thanks!

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• Force Direct3D anti-aliasing in a Direct3D game?

  - by James McLaughlin

  Some old games look really jagged nowadays on large displays without any anti-aliasing, but don't have any option built-in to the game to enable it. On a PC with an NVIDIA graphics card, it's possible to force anti-aliasing in the NVIDIA control panel which can really improve this. But I'm playing the game in Parallels on a Mac, and although the Mac has an NVIDIA graphics card, it's Parallels' emulated card that Windows sees and so obviously there's no NVIDIA control panel. Is there some generic way I can force anti-aliasing for a Direct3D game without using the NVIDIA control panel?

  Read the article

• Firewall to block traffic to specific websites

  - by Ctroy

  I have recently switched from MAC to Windows Vista. I used to have LittleSnitch on Mac where I can create filters and disable browsing to other websites. I mean, I can create filters so that LittleSnitch will not send traffic to specific websites like Google Analytics etc. However, I cannot find a similar software on Windows. I tried Zone Alarm firewall, but it doesn't let you add filters to stop traffic to specific websites. Are there any software available on windows which are similar to LittleSnitch?

  Read the article

• Windows 7 Not Booting After Moving Partition

  - by Guillermo Phillips

  I have a Sony Vaio laptop. After using GParted to move the primary Windows partion, the laptop no longer boots, saying 'Operating system not found'. I don't have a recovery disc and the only other machine I have access to is a Mac Mini. I have tried creating a bootable USB using the recovery ISO from Microsoft. I can see all the files on the USB stick from my Mac. I followed the instructions here: http://borgstrom.ca/2010/10/14/os-x-bootable-usb.html I have set the laptop BIOS boot order to be 'External' first, but the laptop refuses to boot from the USB stick. I have previously been able to boot from a linux installation on the USB stick. Any help or ideas would be appreciated.

  Read the article

• pip install very slow through virtual box

  - by AJP

  pip install --exists-action=w -r requirements.txt is very very slow through virtual box. Any suggests of how to diagnose and fix? Would seeing the VagrantFile be useful? VirtualBox 4.2.12 (can't upgrade to .14 as it doesn't work.) Vagrant 1.0.7 Host machine: ProductName: Mac OS X ProductVersion: 10.7.5 BuildVersion: 11G63b VagrantFile contains: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.customize ["modifyvm", :id, "--memory", 2048] config.vm.box_url = "http://files.vagrantup.com/precise64.box" config.vm.network :hostonly, "33.33.33.21" config.vm.forward_port 5000, 5000 config.vm.forward_port 5555, 5555 config.vm.share_folder "v-root", "/vagrant", "./" Vagrant::Config.run do |config| config.vm.provision :shell, :inline => "VENV=/usr/local/venv bash /vagrant/setup_env.sh" end end Normal download speed is only about 5 times slower at 0.8 Mb per second versus 4 MB per second (as judged by curling a 50 Mb file from S3). But pip install is taking about 20 times longer from Mac (i.e. about 40 minutes) versus 2.

  Read the article

• DFS-R (2008 and R2) 2 node server cluster, all file writes end in conflictAndDeleted

  - by Andrew Gauger

  Both servers in a 2 server cluster are reporting event 4412 20,000 times per day. If I sit in the conflictAndDetected folder I can observe files appearing and disappearing. Users report that their files saved by peers at the same location are overriding each other. The configuration began with a single server, then DFS-R was set up using the 2008 R2 wizard that set up the share on the second server. DFSN was set up independently. Windows users have drives mapped using domain based namespace (\domain.com\share). Mac users are pointed directly to the new server share created by DFS-R. It is PC users indicating most of the lost files, but there has been 2 reports by Mac users about files reverting.

  Read the article

• How do I delete a route in OS X 10.5

  - by authormichael-olsen-craig

  I somehow configured my Mac to route all requests for a particular IP Name (sample.com) to the loopback address (127.0.0.1). Now I'm trying to remove this, but can't determine where to do it. There is no entry for it under /etc/hosts. The routing table shows that it is mapping the IP Name to the IP address of the Mac. Routing table output below: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.2.1 UGSc 4 1 en0 127 sample.com UCS 0 0 lo0 sample.com sample.com UH 1 7093 lo0 169.254 link#4 UCS 0 0 en0 192.168.2 link#4 UCS 6 0 en0 192.168.2.1 0:11:22:22:3f:fa UHLW 20 55565 en0 1070 192.168.2.15 tsema.org UHS 0 9 lo0 192.168.2.255 link#4 UHLWb 4 84777 en0 Any help would be greatly appreciated!

  Read the article

• DKIM- Filter No Signature Data

  - by Vineet Sharma

  I have installed DKIM-Filter on Postfix after reading this tutorial http://www.unibia.com/unibianet/systems-networking/how-setup-domainkeys-identified-mail-dkim-postfix-and-ubuntu-server My email now has a DKIM signature but still it is landing in the SPAM folder. Here is the header Received-SPF: neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=69.164.193.167; Authentication-Results: mx.google.com; spf=neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=hardfail (test mode) [email protected] Received: from promote.a2labs.in (localhost [127.0.0.1]) by promote.a2labs.in (Postfix) with ESMTPA id 34858530E8 for <[email protected]>; Mon, 28 Feb 2011 12:23:07 +0530 (IST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=a2labs.in; s=mail; t=1298875987; bh=bo+H1VYPIHMja2u7i1lnzr4k/j4Pe8iSf79bVw94XpI=; h=To:Subject:Message-ID:Date:From:Reply-To:MIME-Version: Content-Type:Content-Transfer-Encoding; b=nhTdlnUwo0iUJ92ycQzKSRjw 5Pfya0DJcJrAc8Mr2hIv8OLpgzBCzdOMWTGqR5nuUmAzgCGYBhYAM2XZwVxo9JG/iz7 oYKysmNQnskFx0TRyW3UOkDWcfHcPnCL6Y7fGzZWinmsyjsg47k+mKZg/e8jqlwTAMO PYKkt5pBz7SM0= Also my mail.err file shows Feb 28 12:17:03 ivineet dkim-filter[32181]: 1F788530E1: no signature data Feb 28 12:18:02 ivineet dkim-filter[32181]: 432BA530E2: no signature data How to fix it

  Read the article

• How do I create a calendar appointment from an e-mail in Outlook 2011?

  - by Jeff O

  How do I create a calendar appointment from an e-mail in Outlook 2011 for Mac? In Windows, the e-mail content and attachments are carried over just by dragging and dropping. Dragging and dropping on the Mac doesn't work. Is there any other function to take an e-mail and make it a calendar appointment? I'm trying to avoid emailing it to myself. Edit: Since someone went to the trouble to make email2task, is it safe to assume this feature is not available otherwise?

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• serving mp3s to mobile devices is flooding nginx with partial requests

  - by drumfire

  I am serving mp3s with a minimalistic nginx server. What I see in my log files is that there are a lot of requests, in particular from AppleCoreMedia and sometimes Android useragents, that flood the server with short requests. Sometimes they keep requesting to download the same partial content for a very long time; sometimes more than an hour. For example: "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" [...] I also get a lot, but not as much, of these: "-" 400 0 "-" "-" 400 0 "-" The IP addresses are always from clients that start downloading shortly after that request, usually they have roughly the same UserAgent as in the first example. emphasized text I have enabled server throttling and connection limits in nginx to limit the huge amount of log entries from equivalent IPs at least somewhat. There was a performance issue when I saw the same behaviour on the previous server that used Apache. I installed nginx on a better server then moved the site. When Apache could not handle more connections from the increasing number of clients effectively that server was ddossed. There was no bandwidth issue with already connected clients and I don't know if the already connected clients were using more than one connection at a time. Please tell me: Are clients that appear to get stuck on a download a Bad Thing™ I heard people say their mobile bandwidth use was much higher than they could account for. I'm thinking this type of client behaviour can account for that. And costs us more bandwidth too. Which up to date alternatives exist out there that can handle serving this type of data better than plain HTTP? Useful general insights for someone who just came into this field straight out of the late 90s. :-)

  Read the article

• ScreenShare: command line and observe only.

  - by Shyam

  Hi, I have a wide TV screen that is attached to a Mac Mini. I am able to use this screen as a second screen using an application like ScreenRecycler. However, Sometimes I want to demonstrate what I am doing on my box on this TV screen. As this TV is attached to a Mac Mini, I want to have a screen sharing done reversed. As I know screen share can be done in observe mode and full screen, this would be more than sufficient. Because it would be pretty useless to run it continuously, I want it on demand. For this, I want to use SSH. So the only thing I would like to know is, how do I start screen sharing in from a Terminal Session. On Windows, I could start an application by using "start notepad.exe", I am looking for something similar. Eventually, I want to make this work on other boxes too. Thanks for your help!

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

• Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

  - by Ranjith Kumar

  In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

  Read the article

• Switches with 802.1x "supplicant timeout" feature?

  - by chris

  I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

  Read the article

• forced reformat without login / and bootcamp

  - by debug

  ok.. im pretty good with stuff like this, but I have a question. I have mac mini with 10.5.(x) on one partition, and bootcamp (windows) on the other. My boss wants me to reformat the whole mac (10.6 (x)), which is usually easy. He does not remember his password to login, which means I cannot log in and allocate the bootcamp back to one partition using Disk Utility, then reformat the whole drive. When I insert the Snow leopard CD, I can only wipe out one partition, my question is: Is there a way to force a wipe out of both drives in the boot sequence? Any help to wipe out this whole drive and do a clean install would be helpful.. Thanks superusers!

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Sending email with exim and external sender address

  - by Tronic

  i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you! Edit with more details when sending a mail from command line with echo "Test" | mail -s Testmail [email protected] the logs says 2011-01-01 20:45:24 1PZ7OG-0001Vp-Rx <= root@gustav U=root P=local S=360 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx => [email protected] R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.229.27] X=TLS1.0:RSA_ARCFOUR_MD5:16 DN="C=US,ST=California,L=Mountain View,O=Google Inc,CN=mx.google.com" 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx Completed and i get the mail on my gmail account. but when sending by webapp (when testing locally with sendmail it works fine) i only get this log output 2011-01-01 20:50:08 1PZ7Sq-0001X9-L4 <= <> R=1PZ7Sq-0001X7-Jo U=Debian-exim P=local S=1780 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.3] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 Completed

  Read the article

• Mailman delivery troubles

  - by stanigator

  I'm not sure if this is a good place to ask this question. It's about mailing list management software called Mailman from GNU. Here are the details: Hosting provider: Vlexofree Domain: www.sysil.com with Google Apps Mailing List created from hosting cpanel: [email protected] I have registered a list of subscribers, and tried sending an email to [email protected]. I got the following error message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://mail.google.com/support/bin/answer.py?answer=6596 23si6479194ewy.44 (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.216.90.136 with SMTP id e8mr1469147wef.110.1264220118960; Fri, 22 Jan 2010 20:15:18 -0800 (PST) Date: Fri, 22 Jan 2010 20:15:18 -0800 Message-ID: <[email protected]> Subject: From: Stanley Lee <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=0016e6dab0931bccc3047dcd2f1e - Show quoted text - Is there any way of fixing this problem? I would like to be able to have this mailing list to work through my hosting and domain. Thanks in advance.

  Read the article

• Time capsule on windows 7

  - by Kiva

  Hi guys, I have a time machine to backup my mac book pro. All work fine with it. Now, my girlfriend have a PC on windows 7. She wants to backup her PC with cobian backup on the time machine. But her PC doesn't see the time capsule, so it's impossible to connect it. The Time capsule is connected on my box adsl with wifi and the mac and the pc are connected on the box with wifi. Why windows doesn't see the TC ? I installed "bonjour" on the PC but nothing worked. Thanks for your help.

  Read the article

• "blue screen" occurs when using VPN

  - by Milla Well

  I am using the VPN client "Tunnelblick" for getting access to the restricted sites of my university. This is working quite fine, until sometime out of a sudden a "blue screen" occurs which is telling me to restart the computer. I am using Mac OS X Lion on a 4,1 MacBook Air. The error report tells me, that the system crashed somewhere during processing the ipconfig thread. Is someone known to this or similar problems with Mac OS X Lion and VPN and has kind of a solution?

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >