Search Results

Search found 45031 results on 1802 pages for 'same name'.

Page 624/1802 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• Apache Issues on Windows Server 2008

  - by dlackey

  I'm looking to reinstall Apache 2.2.25 since I continue to get these errors in the Windows Application log every 2-5 minutes: Faulting application name: httpd.exe, version: 2.2.25.0, time stamp: 0x51dd049c Faulting module name: zlib1.dll, version: 1.2.3.0, time stamp: 0x4790446a Exception code: 0xc0000005 Fault offset: 0x00002bad Faulting process id: 0x38e8 Faulting application start time: 0x01cfbfd70cdfbc4f Faulting application path: C:\Apache2\bin\httpd.exe Faulting module path: C:\Apache2\bin\zlib1.dll Report Id: 745f20de-2bca-11e4-bd5d-002590f28d7e If the new install doesn't work or if there are some "issues", can I simply restore the Apache2 directory from backup and then I'll just be back where I started? I thought about just renaming the current install to something like c:\apache2_old and if something fails, I can delete the new install and rename c:\apace2_old back to c:\apache. What do you all think?

  Read the article

• Can't execute java files on command prompts when they work perfectly in Eclipse IDE, what to do?

  - by Eduardo de Luna

  I run the following code in Eclipse IDE: public class HelloWorld { public static void main(String[] args) { System.out.println("Hello World!" ) ; } } And it renders the expected output. When getting into the command prompt (DOS) already in the directory, I type this javac HelloWorld.java And then this java HelloWorld And the output reads Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld <wrong name:learning/HelloWorld> With a whole lot more errors, learning being the name of my general package. What's wrong? I have installed Eclipse x86 SDK 4.2.0 together bit with the latest JRE and JDK both in 64 bit as well.

  Read the article

• Replacing old server with new but different hostname & same IP

  - by MaxFr

  We have an old server 2000 and lots of users point to it by hostname and by its IP e.g \\server1, we have a new server 2008 R2 with new name serverlocation1 All folders and data have been sync'toy'd from the old server1 across to serverlocation1 each evening, the new server tree is exactly the same on the new server and all perms are correct. We need to make the new server the same IP as the old server1 as too many people access it directly via IP, and to ensure file and folder paths stay ok, anything \\server1\folder\file needs to go to \\newserverlocation1\folder\file etc I can change the old server1 name to server1-old & change IP and assign the old IP to the new server, but how do I force anything coming in for \\server1 to go to the new server and ensure anything referenced to the old server goes onto the new server ? I can CNAME but I need the new server to have the IP of the previous server so not sure if its straight forward etc..... point server1 to newserverlocation1 Then probably change DNS so that the OLD IP points to new hostname..... Any clarification appreciated.

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Block Domain User login

  - by Param

  I have created a Domain User id ( for example - Auser ). I have integrated my LDAP login with Firewall. I use this user to login in to firewall only. So, I want to block all the login for this User except on Firewall. Is there any way to accomplish this? As per my knowledge, we can specify :- By right click on Domain User -- Properties -- Account tab -- Logonto ( but here we have to specify Computer Name, we don't have any computer name for Firewall -- So i can't use this option ) Through Group Policy Window Setting -- Security Setting -- Local Policies -- User Rights Assignment -- Allow logon Locally (But it has to apply on Computer OU -- So i can't use this option also ) Any Other Option you know ??

  Read the article

• How to reset Chrome's search engines to default?

  - by AndreKR

  I accidentally deleted Google as the default search engine from Chrome. This also caused the "Search Google for this image" item in the context menu of images to disappear. I tried to add it back by adding a search engine with these settings, which I copied from another machine: Name: Google Keyword: google.com URL: {google:baseURL}search?q=%s&{google:RLZ}{google:originalQueryForSuggestion}{google:assistedQueryStats}{google:searchFieldtrialParameter}{google:searchClient}{google:sourceId}{google:instantExtendedEnabledParameter}{google:omniboxStartMarginParameter}ie={inputEncoding} Unfortunately this does not bring back the "Search Google for this image" menu item, so there must be more to this entry than just Name, Keyword and URL. I don't mind deleting all search engines and resetting the list to its default state, but how can I do this?

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• Outlook 2010 on Windows 7 crashes - ieframe.dll

  - by Bryan

  Outlook 2010 is crashing rather randomly, not at any specific time like opening a preview pane or message. Event viewer gives the following Faulting application name: OUTLOOK.EXE, version: 14.0.6131.5000, time stamp: 0x509b1020 Faulting module name: ieframe.dll, version: 9.0.8112.16464, time stamp: 0x50ec98f5 Similar events have been logged only with URLMON.DLL, but with ieframe.dll more frequent. I'm looking where to start with this problem, and I'm starting with running outlook in safe mode using Outlook /safe from the start menu. Further complicating this issue are 2 programs syncing email to other calenders. Should I start with these additional programs that are syncing email as being possible culprits? Or does this have to do with Internet Explorer because of the DLL associated with these crashes? I've tried regsvr32 with both DLL's mentioned, with ieframe being unsuccessful. So my question is: what's causing Outlook to crash?

  Read the article

• Need help translating rate limiting iptables rules to Puppet format

  - by geoffroy

  I use Puppet Iptables module to manage Iptables rules on my machine. I'd like to implement to rate limit failed SSH connections as described here : Hundreds of failed ssh logins iptables -A INPUT -p tcp --dport 22 -m recent --update --seconds 60 --hitcount 5 --name SSH --rsource -j DROP iptables -A INPUT -p tcp --dport 22 -m recent --set --name SSH --rsource -j ACCEPT Is it possible to translate it to Puppet syntax, such as firewall { '015 drop 5 failed attemps to connect to SSH in a minute ': proto => 'tcp', port => 22, action => 'drop', // what are the other paramters ? } Any help welcome. Best regards Geoffroy

  Read the article

• Can't deploy an ejb bean on jboss

  - by leo

  I am try to deploy a jar to an jboss server. It works on my environment. But when I deployed the same jar on another server, i kept getting an error saying that the persistence unit is already registered. There is no other bean using the same name and the same persistence unit name. I tried to restart the server and remove the tmp, work, data directory but still get the same error. here is my error: ObjectName: jboss.j2ee:service=EJB3,module=wess_jpa.jar State: FAILED Reason: java.lang.RuntimeException: javax.management.InstanceAlreadyExistsException: persistence.units:unitName=dses_wess already registered. This is almost identical to this issue in jboss forum but there is no solution: http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4211687#4211687

  Read the article

• Why does this login fail for user 'Servername\Guest'?

  - by Metassebia

  I install SQL Server 2005 EXPRESS edition on one computer, Computer Name = 'MyServe' and Database name='MyDB',take it as database server. it is configured as both Database and Windows Authentication Mode. with username=sa and password=adminaa. I have application in C#.Net my connection string is ConnectionString = "Data Source=MyServe\SQLEXPRESS;Initial Catalog=MyDB;Integrated Security=True;User ID=sa;Password=adminaa"; when I run the application on the computer called MyServe, the database server, it works well, while when I install the application on different computer, when it tries to connect the database it gives an error called "login failed for user 'MyServe\Guest" what is wrong with configuration in the database server or other mistakes. please help me. thankyou in advance. Metasebia

  Read the article

• VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

  - by Patrick

  Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

  Read the article

• Location Directive in a VirtualHost

  - by Yehia A.Salam

  I'm trying to add server-status location directive under one of my virtual host, however i'm getting a 403 Access Forbidden when browsing to www.mywebsite.com/server-status. Is it legal to put the Location Directive under a virtual host? Edit #1: Full vhost config <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin [email protected] ServerName aumento.io ServerAlias www.aumento.io # Index file and Document Root (where the public files are located) DirectoryIndex index.html index.php DocumentRoot /home/cairocubicles/web/aumento.io/public <Directory /home/cairocubicles/web/aumento.io/public> Order Allow,Deny Allow from all Options Indexes FollowSymLinks AllowOverride All AcceptPathInfo On </Directory> <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from aumento.io </Location> # Custom log file locations LogLevel warn ErrorLog /home/cairocubicles/web/aumento.io/log/error.log </VirtualHost>

  Read the article

• MS-Outlook add-on to move a new message to the same folder as the rest of the thread

  - by Guss

  I'm forced to use MS-Outlook in my job, while I very much like the feature that shows all the messages of a discussion thread (that are stored in different folders) in the inbox when a new message is received for that thread, if the previous messages are in a different data file (which I'm forced to have as the MS-Exchange server quota is very very small) then the message list only shows the name of the data file and not the name of the folder where the messages are stored. As a result, because I file my message by context (i.e. all the emails for project A go into a "Project A" folder, etc), and its important for me to have all the messages in a single thread in the same folder, it is sometimes hard to figure out into which folder should I file the new message. It would be great help if there was some add-on or VBA script that I could add to my setup that will offer a shortcut key or a button to "file this message to the same folder as the previous messages in the conversation thread".

  Read the article

• Adding a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.subdomain.domain.tdl': correctusername the password for dev.subdomain.domain.tdl: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• In Ubuntu I make changes to php.ini but nothing happens

  - by MrAn3

  Hi, Apache with php works well, but none of the changes I make in php.ini have effect, I've even delete all the contents of the file, then restart Apache, and run phpinfo() and surprisingly everything continues working well. The file I'm editing is the one that appears in the phpinfo() like "Loaded Configuration File". (/etc/php5/apache2/php.ini) P.S. I'm running Ubuntu 9.04 and PHP 5.2 Thanks in advance. More Details: I'm restarting with sudo /etc/init.d/apache2 restart, I've also tried sudo /etc/init.d/apache2 stop, and then start, at restarting I get: Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] "which php" did not produce any results. My installation of PHP was done using Synaptic Package Manger, choosing "Mark Packages by task" and then LAMP server. I don't have any clue of what to do...

  Read the article

• Parallels: How to see a Mac-hosted website from Windows?

  - by Jim Miller

  I'm traveling at the moment, and have moved one of the websites I'm working on to my MBP so I can work on it without a network connection. I've made an addition to the Mac's /etc/hosts file pointing the domain name to 127.0.0.1, and all's well. I now want to get into Parallels and check the site from Windows browsers. How do I get things so that the Windows browser will understand the domain name and access the site? The Windows image obviously doesn't recognize / can't find the Mac's /etc/hosts file, and references to 127.0.0.1 in the Windows hosts file just as obviously point to Windows, not the Mac. Any advice out there? Thanks!

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

• Desktop file for my pythin script

  - by Jason94

  Hi! I would like to make a .desktop file for my Python script, but so far the only thing i have is a clickable icon on my desktop! It does nothing when i click it, so im guessing there is something wrong with the execution :) The desktop file: [Desktop Entry] Version=1.0 Type=Python Exec=/home/user/MyDocs/Python/EasySteer/Main.py Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons and I also tried: [Desktop Entry] Version=1.0 Type=Application Exec=/usr/bin/xterm "python /home/user/MyDocs/Python/EasySteer/Main.py" Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons But nothing works :D if it matters this is for my Nokia N900 mobile phone that runs Maemo linux, but i think the basics are the same.

  Read the article

• Exchange 2007 - Distribution group not work correctly

  - by AlexB

  I have simple server Windows 2008 Standart SP2 with Exchange 2007 with apply SP1. Only one DC and one Exchange server (not exist Edge) in the same server. I have first distribution group by name "[email protected]" with 10 users. Working with internal and external mail correctly. I have second distribution group by name "[email protected]" with 3 users. Working with internal mail correctly, but external mail delivery failed 2 from 3 users. Only 1 users proclaims that external mail delivered correctly. Those 3 users they are too member of distribution group [email protected]" . I am not found in the eventlog any problem with Exchange server. Any user and any distribution group not check the box "Require that all senders are authenticated." Any ideas on how to solve the problem?

  Read the article

• SuexecUserGroup not working in Apache 2.4

  - by James W.

  I have upgraded my PHP from version 5.3 to 5.4 via yum which requires upgrading Apache from version 2.2 to 2.4. After doing configuration, it turns out that the userid and groupid is still using the global user/group which is "apache". <VirtualHost *:80> ServerName example.com ServerAdmin [email protected] DocumentRoot "/path/to/webroot" .... .... <IfModule mod_fcgid.c> SuexecUserGroup user-name group-name <Directory "/path/to/webroot"> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FcgidWrapper /path/to/webroot/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> </IfModule> ........ </VirtualHost> /etc/httpd/modules/base.conf: LoadModule suexec_module modules/mod_suexec.so I would appreciate if anyone could advise what was I missed. Thanks.

  Read the article

• Setting up DNS for a server on the same server. (Ubuntu 9.04)

  - by Minty

  Hi, recently I've purchased a VPS package which runs Ubuntu 9.04. I'm going to be using it as a general purpose server with a web server, git server, etc. Now, the package is fairly cheap, but in exchange in there's little to no auxiliary functionality, including an absence of nameservers. So, given that I have a domain name and full root access to the VPS, is it possible to configure a nameserver on the VPS for the VPS? That is, I want to link my domain name to my server without the need for an additional server. Thanks

  Read the article

• git log throws error "ambiguous argument"

  - by LonelyPixel

  This used to work about a year ago. Now it doesn't: git log --abbrev=6 The expected result would be all commit hashes abbreviated to 6 characters. The actual result is now this error message: fatal: ambiguous argument '6': unknown revision or path not in the working tree. Use '--' to separate paths from revisions, like this: 'git [...] -- [...]' I have the impression that Git doesn't even know about that argument and tries to silently ignore its name but not the value. Using Git 1.8.1.msysgit.1 on Windows 7. Addition: Oh and it fails on other parameters, too. The entire command is: git log --abbrev=6 --format=format:"----- Commit %%h on %%ci by %%an -----%%n%%n%%B" If I just leave the abbrev part out, it still returns another error: fatal: Invalid object name 'format'.

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >