Search Results

Search found 17003 results on 681 pages for 'multi index'.

Page 625/681 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

• Problem with apt-get update: failed to fetch error

  - by user171447

  I run an Ubuntu Server 12.04.3 LTS. Today, I wanted to update it, but I did not managed it (yes...), however upgrading worked well. I don't want you to solve my problem but it would be greatful if you could give me some hints. I googled hours, I fould a lot of this kind of errors, but not exactly this. Here is the output of apt-get update: Hit http://filepile.fastit.net precise Release.gpg Hit http://filepile.fastit.net precise Release Hit http://filepile.fastit.net precise/main amd64 Packages Hit http://filepile.fastit.net precise/restricted amd64 Packages Hit http://filepile.fastit.net precise/universe amd64 Packages Hit http://filepile.fastit.net precise/multiverse amd64 Packages Hit http://filepile.fastit.net precise/main i386 Packages Hit http://filepile.fastit.net precise/restricted i386 Packages Hit http://filepile.fastit.net precise/universe i386 Packages Hit http://filepile.fastit.net precise/multiverse i386 Packages Ign http://filepile.fastit.net precise/main TranslationIndex Ign http://filepile.fastit.net precise/multiverse TranslationIndex Ign http://filepile.fastit.net precise/restricted TranslationIndex Ign http://filepile.fastit.net precise/universe TranslationIndex Ign http://filepile.fastit.net precise/main Translation-en_GB Ign http://filepile.fastit.net precise/main Translation-en Ign http://filepile.fastit.net precise/main Translation-en_GB.UTF-8 Hit http://archive.canonical.com precise Release.gpg Ign http://filepile.fastit.net precise/multiverse Translation-en_GB Ign http://filepile.fastit.net precise/multiverse Translation-en Ign http://filepile.fastit.net precise/multiverse Translation-en_GB.UTF-8 Ign http://filepile.fastit.net precise/restricted Translation-en_GB Ign http://filepile.fastit.net precise/restricted Translation-en Ign http://filepile.fastit.net precise/restricted Translation-en_GB.UTF-8 Ign http://filepile.fastit.net precise/universe Translation-en_GB Ign http://filepile.fastit.net precise/universe Translation-en Ign http://filepile.fastit.net precise/universe Translation-en_GB.UTF-8 Hit http://archive.ubuntu.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.ubuntu.com precise Release Hit http://archive.ubuntu.com precise/main Sources Hit http://archive.ubuntu.com precise/restricted Sources Hit http://archive.ubuntu.com precise/main i386 Packages Hit http://archive.ubuntu.com precise/restricted i386 Packages Hit http://archive.ubuntu.com precise/multiverse i386 Packages Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://archive.ubuntu.com precise/restricted TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en_GB Hit http://archive.ubuntu.com precise/main Translation-en Hit http://archive.ubuntu.com precise/multiverse Translation-en_GB Hit http://archive.ubuntu.com precise/multiverse Translation-en Hit http://archive.ubuntu.com precise/restricted Translation-en_GB Hit http://archive.ubuntu.com precise/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-security Release.gpg Hit http://fr.archive.ubuntu.com precise-updates Release.gpg Hit http://fr.archive.ubuntu.com precise-security Release Hit http://fr.archive.ubuntu.com precise-updates Release Hit http://fr.archive.ubuntu.com precise-security/main amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/restricted amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/universe amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/multiverse amd64 Packages :W: Failed to fetch http://archive.canonical.com/dists/precise/Release Unable to find expected entry 'main/binary-amd64/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files failed to download. They have been ignored, or old ones used instead. Hit http://fr.archive.ubuntu.com precise-security/main i386 Packages Hit http://fr.archive.ubuntu.com precise-security/restricted i386 Packages Hit http://fr.archive.ubuntu.com precise-security/universe i386 Packages Hit http://fr.archive.ubuntu.com precise-security/multiverse i386 Packages Hit http://fr.archive.ubuntu.com precise-security/main TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/multiverse TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/restricted TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/universe TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/main amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/restricted amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/universe amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/multiverse amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/main i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/restricted i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/universe i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/multiverse i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/main TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/restricted TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/universe TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/main Translation-en Hit http://fr.archive.ubuntu.com precise-security/multiverse Translation-en Hit http://fr.archive.ubuntu.com precise-security/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-security/universe Translation-en Hit http://fr.archive.ubuntu.com precise-updates/main Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/main Translation-en Hit http://fr.archive.ubuntu.com precise-updates/multiverse Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://fr.archive.ubuntu.com precise-updates/restricted Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-updates/universe Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/universe Translation-en And here is my /etc/apt/sources.list: ###### Ubuntu Main Repos deb http://filepile.fastit.net/ubuntu/ precise main restricted universe multiverse # deb http://de.archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.canonical.com/ precise main restricted universe multiverse ###### Ubuntu Update Repos deb http://fr.archive.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise main restricted multiverse deb-src http://archive.ubuntu.com/ubuntu precise main restricted multiverse Thanks for your help!

  Read the article

• SQL SERVER – Solution – Puzzle – SELECT * vs SELECT COUNT(*)

  - by pinaldave

  Earlier I have published Puzzle Why SELECT * throws an error but SELECT COUNT(*) does not. This question have received many interesting comments. Let us go over few of the answers, which are valid. Before I start the same, let me acknowledge Rob Farley who has not only answered correctly very first but also started interesting conversation in the same thread. The usual question will be what is the right answer. I would like to point to official Microsoft Connect Items which discusses the same. RGarvao https://connect.microsoft.com/SQLServer/feedback/details/671475/select-test-where-exists-select tiberiu utan http://connect.microsoft.com/SQLServer/feedback/details/338532/count-returns-a-value-1 Rob Farley count(*) is about counting rows, not a particular column. It doesn’t even look to see what columns are available, it’ll just count the rows, which in the case of a missing FROM clause, is 1. “select *” is designed to return columns, and therefore barfs if there are none available. Even more odd is this one: select ‘blah’ where exists (select *) You might be surprised at the results… Koushik The engine performs a “Constant scan” for Count(*) where as in the case of “SELECT *” the engine is trying to perform either Index/Cluster/Table scans. amikolaj When you query ‘select * from sometable’, SQL replaces * with the current schema of that table. With out a source for the schema, SQL throws an error. so when you query ‘select count(*)’, you are counting the one row. * is just a constant to SQL here. Check out the execution plan. Like the description states – ‘Scan an internal table of constants.’ You could do ‘select COUNT(‘my name is adam and this is my answer’)’ and get the same answer. Netra Acharya SELECT * Here, * represents all columns from a table. So it always looks for a table (As we know, there should be FROM clause before specifying table name). So, it throws an error whenever this condition is not satisfied. SELECT COUNT(*) Here, COUNT is a Function. So it is not mandetory to provide a table. Check it out this: DECLARE @cnt INT SET @cnt = COUNT(*) SELECT @cnt SET @cnt = COUNT(‘x’) SELECT @cnt Naveen Select 1 / Select ‘*’ will return 1/* as expected. Select Count(1)/Count(*) will return the count of result set of select statement. Count(1)/Count(*) will have one 1/* for each row in the result set of select statement. Select 1 or Select ‘*’ result set will contain only 1 result. so count is 1. Where as “Select *” is a sysntax which expects the table or equauivalent to table (table functions, etc..). It is like compilation error for that query. Ramesh Hi Friends, Count is an aggregate function and it expects the rows (list of records) for a specified single column or whole rows for *. So, when we use ‘select *’ it definitely give and error because ‘*’ is meant to have all the fields but there is not any table and without table it can only raise an error. So, in the case of ‘Select Count(*)’, there will be an error as a record in the count function so you will get the result as ’1'. Try using : Select COUNT(‘RAMESH’) and think there is an error ‘Must specify table to select from.’ in place of ‘RAMESH’ Pinal : If i am wrong then please clarify this. Sachin Nandanwar Any aggregate function expects a constant or a column name as an expression. DO NOT be confused with * in an aggregate function.The aggregate function does not treat it as a column name or a set of column names but a constant value, as * is a key word in SQL. You can replace any value instead of * for the COUNT function.Ex Select COUNT(5) will result as 1. The error resulting from select * is obvious it expects an object where it can extract the result set. I sincerely thank you all for wonderful conversation, I personally enjoyed it and I am sure all of you have the same feeling. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 2)

  - by Sadequl Hussain

  Continuing from Part 1  , our Migration Checklist continues: Step 5: Update statistics It is always a good idea to update the statistics of the database that you have just installed or migrated. To do this, run the following command against the target database: sp_updatestats The sp_updatestats system stored procedure runs the UPDATE STATISTICS command against every user and system table in the database.  However, a word of caution: running the sp_updatestats against a database with a compatibility level below 90 (SQL Server 2005) will reset the automatic UPDATE STATISTICS settings for every index and statistics of every table in the database. You may therefore want to change the compatibility mode before you run the command. Another thing you should remember to do is to ensure the new database has its AUTO_CREATE_STATISTICS and AUTO_UPDATE_STATISTICS properties set to ON. You can do so using the ALTER DATABASE command or from the SSMS. Step 6: Set database options You may have to change the state of a database after it has been restored. If the database was changed to single-user or read-only mode before backup, the restored copy will also retain these settings. This may not be an issue when you are manually restoring from Enterprise Manager or the Management Studio since you can change the properties. However, this is something to be mindful of if the restore process is invoked by an automated job or script and the database needs to be written to immediately after restore. You may want to check the database’s status programmatically in such cases. Another important option you may want to set for the newly restored / attached database is PAGE_VERIFY. This option specifies how you want SQL Server to ensure the physical integrity of the data. It is a new option from SQL Server 2005 and can have three values: CHECKSUM (default for SQL Server 2005 and latter databases), TORN_PAGE_DETECTION (default when restoring a pre-SQL Server 2005 database) or NONE. Torn page detection was itself an option for SQL Server 2000 databases. From SQL Server 2005, when PAGE_VERIFY is set to CHECKSUM, the database engine calculates the checksum for a page’s contents and writes it to the page header before storing it in disk. When the page is read from the disk, the checksum is computed again and compared with the checksum stored in the header.  Torn page detection works much like the same way in that it stores a bit in the page header for every 512 byte sector. When data is read from the page, the torn page bits stored in the header is compared with the respective sector contents. When PAGE_VERIFY is set to NONE, SQL Server does not perform any checking, even if torn page data or checksums are present in the page header.  This may not be something you would want to set unless there is a very specific reason.  Microsoft suggests using the CHECKSUM page verify option as this offers more protection. Step 7: Map database users to logins A common database migration issue is related to user access. Windows and SQL Server native logins that existed in the source instance and had access to the database may not be present in the destination. Even if the logins exist in the destination, the mapping between the user accounts and the logins will not be automatic. You can use a special system stored procedure called sp_change_users_login to address these situations. The procedure needs to be run against the newly attached or restored database and can accept four parameters. Depending on what you want to do, you may be using less than four though. The first parameter, @Action, can take three values. When you specify @Action = ‘Report’, the system will provide you with a list of database users which are not mapped to any login. If you want to map a database user to an existing SQL Server login, the value for @Action will be ‘Update_One’. In this case, you will only need to provide the database user name and the login it will map to. So if your newly restored database has a user account called “bob” and there is already a SQL Server login with the same name and you want to map the user to the login, you will execute a query like the following: sp_change_users_login         @Action = ‘Update_One’,         @UserNamePattern = ‘bob’,         @LoginName = ‘bob’ If the login does not exist, you can instruct SQL Server to create the login with the same name. In this case you will need to provide a password for the login and the value of the @Action parameter will be ‘Auto_Fix’. If the login already exists, it will be automatically mapped to the user account. Unfortunately sp_change_users_login system stored procedure cannot be used to map database users to trusted logins (Windows accounts) in SQL Server. You will need to follow a manual process to re-map the database user accounts.  Continues…

  Read the article

• CodePlex Daily Summary for Saturday, March 20, 2010

  CodePlex Daily Summary for Saturday, March 20, 2010New ProjectsaMaze Mapa Generator: Parte do Projeto aMazeASP.Net RIA Controls: Simple ASP.Net server controls to integrate Flash and Silverlight controls into your web applications. Included controls don't use any JavaScript,...BMap.NET: BMaps.NET is a .NET application written in C#, for access Bing Maps from your computer without web browsers. With it you can access to Bing Maps an...DaliNet: A .NET API for the Tridonic.Atco DALI USB device.Fabrica7: This is the main project of Fabrica 7 Corp.Image Ripper: A Winform application parse & fetch various HD pictures in specific photo galleries.IoCWrap: Provides interfaces which wrap various IoC container implementations so that it is possible to switch to a different provider without changing any ...NetSockets: NetSockets is a .NET class library that provides easy-to-use, multi-threaded, event-based, client and server network communication.Network Backup: Network Backup is a home and small company backup solution for workstations and a backup server. It incorporates a backup service, scheduler, data ...NUnit.Specs: Specification extensions for NUnit.Nutrivida: Sistema para avaliação de especialização.OHTB Snake: OHTB Snake is a multiplayer game. In this incarnation, snakes may eat 3 types of powerups: standard berries, causing them to grow; sawberries, caus...Playground TDrouen: Tjerk's PlaygroundPower Plan Chooser: This is my first endeavor into a C# Windows application with XAML. The program sits in the notification area (task bar) and lets you quickly activa...Search IMDB in C#: In lack of an IMDB API most of us resort to screen scraping utilities to query the Internet Movie Database. This one is written in C# (.NET 2.0 sta...SIGPRO Desktop: FUNCERNSql2008 PerfMonCounter Fix: Small console application to Fix the SQL 2008 Express Edition installation error: Pequena aplicação para Corrigir o seguinte erro de Instalação do...TwiztedTracker: TwiztedTracker designed to make your bug tracking easy.UmbracoXsltLogHelper: I needed a way to easily add log rows from my xslt macros, and added a single-line-extension for that reason. Then I played around with the umbraco...VisualStock: VisualStock is stock data visualization, analysis application build on the Micorsoft Composite Application Library.WHS File Mover: A Windows Home Server Plugin to move files from a local directory ("drop" or "staging" directory to a folder share)XML based Content Deployment in SharePoint: XML based Content Deployment in Sharepoint helps you to easy deploy content into SharePoint, including webs, lists, items, files and folder. You wi...New ReleasesASP.Net RIA Controls: Version 1.0 Beta: The first functionnal version.BMap.NET: BMap.NET 1: This is the 1st version of BMap.NETDigital Media Processing Project 1: Image Processor: Image Processor 1.0: All features implemented. Added: clipping imageFamily Tree Analyzer: Version 1.3.1.0: Version 1.3.1.0 Added a cancel button to marriage and children IGI Searches Opening Results window now automatically shows first record Updated IGI...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.5 Released: Hi, This release contains fix for the following bug: * Chart threw exception if ZoomingEnabled property was set to True at real-time. You ca...Homework Helper: Homework Helper v.1.1: Sorry but the latest release didn't seem to be the latest. This should be the right one!Image Ripper: Image Ripper: Image Ripper based on HtmlAgilityPack and GData library.ManPowerEngine: 0.1: UpdatesSound System added. Bitmap Collider in Physics System works now. Improved the performance of HTTP download in images Physics Framework...NIPO Data Processing Component Framework: NIPO 1.0: The first release of NIPO. Includes the NIPO binary dll and documentation. This release does not include a starter application since it is still in...patterns & practices SharePoint Guidance: SPG2010 Drop7: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...Photosynth Point Cloud Exporter: Photosynth Point Cloud Exporter 1.0.2: Photosynth webservice reference updated to work with the new site OBJ file format support added (Note: this format doesn't support vertex colors)Power Plan Chooser: Power Plan Chooser 1.0.0: Power Plan Chooser is a small utility that sits in the notification area (task bar) in Windows 7 and allows the user to quickly activate one of the...Restart Explorer: RestartExplorer Release 1.00.0001: Initial release: Start, stop and restart Windows Explorer with this utility.Search IMDB in C#: Search IMDB 1.0: Source code included with compiled example.SIMD Detector: 3rd Release: Added Intel AES instruction check Added a CSharp Winform NetSIMDDetector application. Changes the red ball and green ball images to red cross a...Sql2008 PerfMonCounter Fix: Sql2008FIx_PerfMonCounter.zip: Small console application to Fix the SQL 2008 Express Edition installation error: http://support.microsoft.com/kb/300956 Rule Name PerfMonCounter...UmbracoXsltLogHelper: 0.9 Working Beta: First version. XsltLogHelper09 is the installable package.VCC: Latest build, v2.1.30319.0: Automatic drop of latest buildWCF RIA Services Contrib: RIA Services Contrib RC Release: This version is recompiled against the RC release of WCF RIA Services.XML based Content Deployment in SharePoint: SPContentDeployment 1.0.0.0: The first link contains the resources and a sample project. The second link contains everything included in the first package and an additional fo...Yet Another GPS: YAGPS Alfa.2: Yet another GPS tracker is a very powerful GPS track application for Windows Mobile Speed Guage, Sat Count number, KML for google map file formatZGuideTV.NET: ZGuideTV.NET 0.92: Vendredi 19 mars 2010 (ZGuideTV.NET bêta 9 build 0.92) - English below Corrections : - Gestion de certains contrôles dans l'écran principal. - Div...Most Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQPHPExcelpatterns & practices – Enterprise LibraryBlogEngine.NETFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• Preview and Purchase Ebooks with Kindle for PC

  - by Matthew Guay

  Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

• Helping install mrcwa and solve problems with f2py in Ubuntu 14.04 LTS

  - by user288160

  I am sorry if this is the wrong section but I am starting to get desperate, please someone help me... I need to install the program mrcwa-20080820 (sourceforge.net/projects/mrcwa/) because a summer project that I am involved. I need to use it together with anaconda (store.continuum.io/cshop/anaconda/), I already installed Anaconda and apparently it is working. When I type: conda --version I got the expected answer. conda 3.5.2 If I tried to import numpy or scipy with python or simple type f2py there are no errors. So far so good. But when I tried to install this program sudo python setup.py install I got these errors: running install running build sh: 1: f2py: not found cp: cannot stat ‘mrcwaf.so’: No such file or directory running build_py running install_lib running install_egg_info Removing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Writing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Obs: I am trying to use intel fortran 64-bits and Ubuntu 14.04 LTS. So I was checking f2py and tried to execute the program hello world f2py -c -m hello hello.f from here: cens.ioc.ee/projects/f2py2e/index.html#usage and I had some problems too: running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "hello" sources f2py options: [] f2py:> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c creating /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 Reading fortran codes... Reading file 'hello.f' (format:fix,strict) Post-processing... Block: hello Block: foo Post-processing (stage 2)... Building modules... Building module "hello"... Constructing wrapper function "foo"... foo(a) Wrote C/API module "hello" to file "/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 /hellomodule.c" adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c' to sources. adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7' to include_dirs. copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.c -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.h -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Could not locate executable gfortran Could not locate executable f95 customize IntelFCompiler Found executable /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort customize LaheyFCompiler Could not locate executable lf95 customize PGroupFCompiler Could not locate executable pgfortran customize AbsoftFCompiler Could not locate executable f90 Could not locate executable f77 customize NAGFCompiler customize VastFCompiler customize CompaqFCompiler Could not locate executable fort customize IntelItaniumFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler using build_ext building 'hello' extension compiling C sources C compiler: gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC creating /tmp/tmpf8P4Y3/tmp creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3 creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local/lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c:17: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c:2: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ compiling Fortran sources Fortran f77 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict Fortran f90 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FR -fPIC -xhost -openmp -fp-model strict Fortran fix compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local /lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' ifort:f77: hello.f /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -shared -shared -nofor_main /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.o /tmp/tmpf8P4Y3 /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.o /tmp/tmpf8P4Y3/hello.o -L/home/felipe /anaconda/lib -lpython2.7 -o ./hello.so Removing build directory /tmp/tmpf8P4Y3 Please help me I am new in ubuntu and python. I really need this program, my advisor is waiting an answer. Thank you very much, Felipe Oliveira.

  Read the article

• ORA-4030 Troubleshooting

  - by [email protected]

  QUICKLINK: Note 399497.1 FAQ ORA-4030 Note 1088087.1 : ORA-4030 Diagnostic Tools [Video]   Have you observed an ORA-0430 error reported in your alert log? ORA-4030 errors are raised when memory or resources are requested from the Operating System and the Operating System is unable to provide the memory or resources.   The arguments included with the ORA-4030 are often important to narrowing down the problem. For more specifics on the ORA-4030 error and scenarios that lead to this problem, see Note 399497.1 FAQ ORA-4030.   Looking for the best way to diagnose? There are several available diagnostic tools (error tracing, 11g Diagnosibility, OCM, Process Memory Guides, RDA, OSW, diagnostic scripts) that collectively can prove powerful for identifying the cause of the ORA-4030.    Error Tracing   The ORA-4030 error usually occurs on the client workstation and for this reason, a trace file and alert log entry may not have been generated on the server side.  It may be necessary to add additional tracing events to get initial diagnostics on the problem. To setup tracing to trap the ORA-4030, on the server use the following in SQLPlus: alter system set events '4030 trace name heapdump level 536870917;name errorstack level 3';Once the error reoccurs with the event set, you can turn off  tracing using the following command in SQLPlus:alter system set events '4030 trace name context off; name context off';NOTE:   See more diagnostics information to collect in Note 399497.1  11g DiagnosibilityStarting with Oracle Database 11g Release 1, the Diagnosability infrastructure was introduced which places traces and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-4030 occurs.  For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file may contain vital information about what led to the error condition.    Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Informationto Support[Video]  Oracle Configuration Manager (OCM) Oracle Configuration Manager (OCM) works with My Oracle Support to enable proactive support capability that helps you organize, collect and manage your Oracle configurations. Oracle Configuration Manager Quick Start Guide Note 548815.1: My Oracle Support Configuration Management FAQ Note 250434.1: BULLETIN: Learn More About My Oracle Support Configuration Manager    General Process Memory Guides   An ORA-4030 indicates a limit has been reached with respect to the Oracle process private memory allocation.    Each Operating System will handle memory allocations with Oracle slightly differently. Solaris     Note 163763.1Linux       Note 341782.1IBM AIX   Notes 166491.1 and 123754.1HP           Note 166490.1Windows Note 225349.1, Note 373602.1, Note 231159.1, Note 269495.1, Note 762031.1Generic    Note 169706.1   RDAThe RDA report will show more detailed information about the database and Server Configuration. Note 414966.1 RDA Documentation Index Download RDA -- refer to Note 314422.1 Remote Diagnostic Agent (RDA) 4 - Getting Started OS Watcher (OSW)This tool is designed to gather Operating System side statistics to compare with the findings from the database.  This is a key tool in cases where memory usage is higher than expected on the server while not experiencing ORA-4030 errors currently. Reference more details on setup and usage in Note 301137.1 OS Watcher User Guide Diagnostic Scripts   Refer to Note 1088087.1 : ORA-4030 Diagnostic Tools [Video] Common Causes/Solutions The ORA-4030 can occur for a variety of reasons.  Some common causes are:   * OS Memory limit reached such as physical memory and/or swap/virtual paging.   For instance, IBM AIX can experience ORA-4030 issues related to swap scenarios.  See Note 740603.1 10.2.0.4 not using large pages on AIX for more on that problem. Also reference Note 188149.1 for pointers on 10g and stack size issues.* OS limits reached (kernel or user shell limits) that limit overall, user level or process level memory * OS limit on PGA memory size due to SGA attach address           Reference: Note 1028623.6 SOLARIS How to Relocate the SGA* Oracle internal limit on functionality like PL/SQL varrays or bulk collections. ORA-4030 errors will include arguments like "pl/sql vc2" "pmucalm coll" "pmuccst: adt/re".  See Coding Pointers for pointers on application design to get around these issues* Application design causing limits to be reached* Bug - space leaks, heap leaks   ***For reference to the content in this blog, refer to Note.1088267.1 Master Note for Diagnosing ORA-4030

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

• How do I prove or disprove "god" objects are wrong?

  - by honestduane

  Problem Summary: Long story short, I inherited a code base and an development team I am not allowed to replace and the use of God Objects is a big issue. Going forward, I want to have us re-factor things but I am getting push-back from the teams who want to do everything with God Objects "because its easier" and this means I would not be allowed to re-factor. I pushed back citing my years of dev experience, that I'm the new boss who was hired to know these things, etc, and so did the third party offshore companies account sales rep, and this is now at the executive level and my meeting is tomorrow and I want to go in with a lot of technical ammo to advocate best practices because I feel it will be cheaper in the long run (And I personally feel that is what the third party is worried about) for the company. My issue is from a technical level, I know its good long term but I'm having trouble with the ultra short term and 6 months term, and while its something I "know" I cant prove it with references and cited resources outside of one person (Robert C. Martin, aka Uncle Bob), as that is what I am being asked to do as I have been told having data from one person and only one person (Robert C Martin) is not good enough of an argument. Question: What are some resources I can cite directly (Title, year published, page number, quote) by well known experts in the field that explicitly say this use of "God" Objects/Classes/Systems is bad (or good, since we are looking for the most technically valid solution)? Research I have already done: I have a number of books here and I have searched their indexes for the use of the words "god object" and "god class". I found that oddly its almost never used and the copy of the GoF book I have for example, never uses it (At least according to the index in front of me) but I have found it in 2 books per the below, but I want more I can use. I checked the Wikipedia page for "God Object" and its currently a stub with little reference links so although I personally agree with that it says, It doesn't have much I can use in an environment where personal experience is not considered valid. The book cited is also considered too old to be valid by the people I am debating these technical points with as the argument they are making is that "it was once thought to be bad but nobody could prove it, and now modern software says "god" objects are good to use". I personally believe that this statement is incorrect, but I want to prove the truth, whatever it is. In Robert C Martin's "Agile Principles, Patterns, and Practices in C#" (ISBN: 0-13-185725-8, hardcover) where on page 266 it states "Everybody knows that god classes are a bad idea. We don't want to concentrate all the intelligence of a system into a single object or a single function. One of the goals of OOD is the partitioning and distribution of behavior into many classes and many function." -- And then goes on to say sometimes its better to use God Classes anyway sometimes (Citing micro-controllers as an example). In Robert C Martin's "Clean Code: A Handbook of Agile Software Craftsmanship" page 136 (And only this page) talks about the "God class" and calls it out as a prime example of a violation of the "classes should be small" rule he uses to promote the Single Responsibility Principle" starting on on page 138. The problem I have is all my references and citations come from the same person (Robert C. Martin), and am from the same single person/source. I am being told that because he is just one guy, my desire to not use "God Classes" is invalid and not accepted as a standard best practice in the software industry. Is this true? Am I doing things wrong from a technical perspective by trying to keep to the teaching of Uncle Bob? God Objects and Object Oriented Programming and Design: The more I think of this the more I think this is more something you learn when you study OOP and its never explicitly called out; Its implicit to good design is my thinking (Feel free to correct me, please, as I want to learn), The problem is I "know" this, but but not everybody does, so in this case its not considered a valid argument because I am effectively calling it out as universal truth when in fact most people are statistically ignorant of it since statistically most people are not programmers. Conclusion: I am at a loss on what to search for to get the best additional results to cite, since they are making a technical claim and I want to know the truth and be able to prove it with citations like a real engineer/scientist, even if I am biased against god objects due to my personal experience with code that used them. Any assistance or citations would be deeply appreciated.

  Read the article

• General monitoring for SQL Server Analysis Services using Performance Monitor

  - by Testas

  A recent customer engagement required a setup of a monitoring solution for SSAS, due to the time restrictions placed upon this, native Windows Performance Monitor (Perfmon) and SQL Server Profiler Monitoring Tools was used as using a third party tool would have meant the customer providing an additional monitoring server that was not available.I wanted to outline the performance monitoring counters that was used to monitor the system on which SSAS was running. Due to the slow query performance that was occurring during certain scenarios, perfmon was used to establish if any pressure was being placed on the Disk, CPU or Memory subsystem when concurrent connections access the same query, and Profiler to pinpoint how the query was being managed within SSAS, profiler I will leave for another blogThis guide is not designed to provide a definitive list of what should be used when monitoring SSAS, different situations may require the addition or removal of counters as presented by the situation. However I hope that it serves as a good basis for starting your monitoring of SSAS. I would also like to acknowledge Chris Webb’s awesome chapters from “Expert Cube Development” that also helped shape my monitoring strategy:http://cwebbbi.spaces.live.com/blog/cns!7B84B0F2C239489A!6657.entrySimulating ConnectionsTo simulate the additional connections to the SSAS server whilst monitoring, I used ascmd to simulate multiple connections to the typical and worse performing queries that were identified by the customer. A similar sript can be downloaded from codeplex at http://www.codeplex.com/SQLSrvAnalysisSrvcs.     File name: ASCMD_StressTestingScripts.zip. Performance MonitorWithin performance monitor,  a counter log was created that contained the list of counters below. The important point to note when running the counter log is that the RUN AS property within the counter log properties should be changed to an account that has rights to the SSAS instance when monitoring MSAS counters. Failure to do so means that the counter log runs under the system account, no errors or warning are given while running the counter log, and it is not until you need to view the MSAS counters that they will not be displayed if run under the default account that has no right to SSAS. If your connection simulation takes hours, this could prove quite frustrating if not done beforehand JThe counters used……  Object Counter Instance Justification System Processor Queue legnth N/A Indicates how many threads are waiting for execution against the processor. If this counter is consistently higher than around 5 when processor utilization approaches 100%, then this is a good indication that there is more work (active threads) available (ready for execution) than the machine's processors are able to handle. System Context Switches/sec N/A Measures how frequently the processor has to switch from user- to kernel-mode to handle a request from a thread running in user mode. The heavier the workload running on your machine, the higher this counter will generally be, but over long term the value of this counter should remain fairly constant. If this counter suddenly starts increasing however, it may be an indicating of a malfunctioning device, especially if the Processor\Interrupts/sec\(_Total) counter on your machine shows a similar unexplained increase Process % Processor Time sqlservr Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process % Processor Time msmdsrv Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process Working Set sqlservr If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Process Working Set msmdsrv If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Processor % Processor Time _Total and individual cores measures the total utilization of your processor by all running processes. If multi-proc then be mindful only an average is provided Processor % Privileged Time _Total To see how the OS is handling basic IO requests. If kernel mode utilization is high, your machine is likely underpowered as it's too busy handling basic OS housekeeping functions to be able to effectively run other applications. Processor % User Time _Total To see how the applications is interacting from a processor perspective, a high percentage utilisation determine that the server is dealing with too many apps and may require increasing thje hardware or scaling out Processor Interrupts/sec _Total  The average rate, in incidents per second, at which the processor received and serviced hardware interrupts. Shoulr be consistant over time but a sudden unexplained increase could indicate a device malfunction which can be confirmed using the System\Context Switches/sec counter Memory Pages/sec N/A Indicates the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays, this is the primary counter to watch for indication of possible insufficient RAM to meet your server's needs. A good idea here is to configure a perfmon alert that triggers when the number of pages per second exceeds 50 per paging disk on your system. May also want to see the configuration of the page file on the Server Memory Available Mbytes N/A is the amount of physical memory, in bytes, available to processes running on the computer. if this counter is greater than 10% of the actual RAM in your machine then you probably have more than enough RAM. monitor it regularly to see if any downward trend develops, and set an alert to trigger if it drops below 2% of the installed RAM. Physical Disk Disk Transfers/sec for each physical disk If it goes above 10 disk I/Os per second then you've got poor response time for your disk. Physical Disk Idle Time _total If Disk Transfers/sec is above  25 disk I/Os per second use this counter. which measures the percent time that your hard disk is idle during the measurement interval, and if you see this counter fall below 20% then you've likely got read/write requests queuing up for your disk which is unable to service these requests in a timely fashion. Physical Disk Disk queue legnth For the OLAP and SQL physical disk A value that is consistently less than 2 means that the disk system is handling the IO requests against the physical disk Network Interface Bytes Total/sec For the NIC Should be monitored over a period of time to see if there is anb increase/decrease in network utilisation Network Interface Current Bandwidth For the NIC is an estimate of the current bandwidth of the network interface in bits per second (BPS). MSAS 2005: Memory Memory Limit High KB N/A Shows (as a percentage) the high memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Limit Low KB N/A Shows (as a percentage) the low memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Usage KB N/A Displays the memory usage of the server process. MSAS 2005: Memory File Store KB N/A Displays the amount of memory that is reserved for the Cache. Note if total memory limit in the msmdsrv.ini is set to 0, no memory is reserved for the cache MSAS 2005: Storage Engine Query Queries from Cache Direct / sec N/A Displays the rate of queries answered from the cache directly MSAS 2005: Storage Engine Query Queries from Cache Filtered / Sec N/A Displays the Rate of queries answered by filtering existing cache entry. MSAS 2005: Storage Engine Query Queries from File / Sec N/A Displays the Rate of queries answered from files. MSAS 2005: Storage Engine Query Average time /query N/A Displays the average time of a query MSAS 2005: Connection Current connections N/A Displays the number of connections against the SSAS instance MSAS 2005: Connection Requests / sec N/A Displays the rate of query requests per second MSAS 2005: Locks Current Lock Waits N/A Displays thhe number of connections waiting on a lock MSAS 2005: Threads Query Pool job queue Length N/A The number of queries in the job queue MSAS 2005:Proc Aggregations Temp file bytes written/sec N/A Shows the number of bytes of data processed in a temporary file MSAS 2005:Proc Aggregations Temp file rows written/sec N/A Shows the number of bytes of data processed in a temporary file 

  Read the article

• Atmospheric Scattering

  - by Lawrence Kok

  I'm trying to implement atmospheric scattering based on Sean O`Neil algorithm that was published in GPU Gems 2. But I have some trouble getting the shader to work. My latest attempts resulted in: http://img253.imageshack.us/g/scattering01.png/ I've downloaded sample code of O`Neil from: http://http.download.nvidia.com/developer/GPU_Gems_2/CD/Index.html. Made minor adjustments to the shader 'SkyFromAtmosphere' that would allow it to run in AMD RenderMonkey. In the images it is see-able a form of banding occurs, getting an blueish tone. However it is only applied to one half of the sphere, the other half is completely black. Also the banding appears to occur at Zenith instead of Horizon, and for a reason I managed to get pac-man shape. I would appreciate it if somebody could show me what I'm doing wrong. Vertex Shader: uniform mat4 matView; uniform vec4 view_position; uniform vec3 v3LightPos; const int nSamples = 3; const float fSamples = 3.0; const vec3 Wavelength = vec3(0.650,0.570,0.475); const vec3 v3InvWavelength = 1.0f / vec3( Wavelength.x * Wavelength.x * Wavelength.x * Wavelength.x, Wavelength.y * Wavelength.y * Wavelength.y * Wavelength.y, Wavelength.z * Wavelength.z * Wavelength.z * Wavelength.z); const float fInnerRadius = 10; const float fOuterRadius = fInnerRadius * 1.025; const float fInnerRadius2 = fInnerRadius * fInnerRadius; const float fOuterRadius2 = fOuterRadius * fOuterRadius; const float fScale = 1.0 / (fOuterRadius - fInnerRadius); const float fScaleDepth = 0.25; const float fScaleOverScaleDepth = fScale / fScaleDepth; const vec3 v3CameraPos = vec3(0.0, fInnerRadius * 1.015, 0.0); const float fCameraHeight = length(v3CameraPos); const float fCameraHeight2 = fCameraHeight * fCameraHeight; const float fm_ESun = 150.0; const float fm_Kr = 0.0025; const float fm_Km = 0.0010; const float fKrESun = fm_Kr * fm_ESun; const float fKmESun = fm_Km * fm_ESun; const float fKr4PI = fm_Kr * 4 * 3.141592653; const float fKm4PI = fm_Km * 4 * 3.141592653; varying vec3 v3Direction; varying vec4 c0, c1; float scale(float fCos) { float x = 1.0 - fCos; return fScaleDepth * exp(-0.00287 + x*(0.459 + x*(3.83 + x*(-6.80 + x*5.25)))); } void main( void ) { // Get the ray from the camera to the vertex, and its length (which is the far point of the ray passing through the atmosphere) vec3 v3FrontColor = vec3(0.0, 0.0, 0.0); vec3 v3Pos = normalize(gl_Vertex.xyz) * fOuterRadius; vec3 v3Ray = v3CameraPos - v3Pos; float fFar = length(v3Ray); v3Ray = normalize(v3Ray); // Calculate the ray's starting position, then calculate its scattering offset vec3 v3Start = v3CameraPos; float fHeight = length(v3Start); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fCameraHeight)); float fStartAngle = dot(v3Ray, v3Start) / fHeight; float fStartOffset = fDepth*scale(fStartAngle); // Initialize the scattering loop variables float fSampleLength = fFar / fSamples; float fScaledLength = fSampleLength * fScale; vec3 v3SampleRay = v3Ray * fSampleLength; vec3 v3SamplePoint = v3Start + v3SampleRay * 0.5; // Now loop through the sample rays for(int i=0; i<nSamples; i++) { float fHeight = length(v3SamplePoint); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fHeight)); float fLightAngle = dot(normalize(v3LightPos), v3SamplePoint) / fHeight; float fCameraAngle = dot(normalize(v3Ray), v3SamplePoint) / fHeight; float fScatter = (-fStartOffset + fDepth*( scale(fLightAngle) - scale(fCameraAngle)))/* 0.25f*/; vec3 v3Attenuate = exp(-fScatter * (v3InvWavelength * fKr4PI + fKm4PI)); v3FrontColor += v3Attenuate * (fDepth * fScaledLength); v3SamplePoint += v3SampleRay; } // Finally, scale the Mie and Rayleigh colors and set up the varying variables for the pixel shader vec4 newPos = vec4( (gl_Vertex.xyz + view_position.xyz), 1.0); gl_Position = gl_ModelViewProjectionMatrix * vec4(newPos.xyz, 1.0); gl_Position.z = gl_Position.w * 0.99999; c1 = vec4(v3FrontColor * fKmESun, 1.0); c0 = vec4(v3FrontColor * (v3InvWavelength * fKrESun), 1.0); v3Direction = v3CameraPos - v3Pos; } Fragment Shader: uniform vec3 v3LightPos; varying vec3 v3Direction; varying vec4 c0; varying vec4 c1; const float g =-0.90f; const float g2 = g * g; const float Exposure =2; void main(void){ float fCos = dot(normalize(v3LightPos), v3Direction) / length(v3Direction); float fMiePhase = 1.5 * ((1.0 - g2) / (2.0 + g2)) * (1.0 + fCos*fCos) / pow(1.0 + g2 - 2.0*g*fCos, 1.5); gl_FragColor = c0 + fMiePhase * c1; gl_FragColor.a = 1.0; }

  Read the article

• XNA Notes 002

  - by George Clingerman

  This past week (much like every week in the XNA community) was filled with things happening and people doing cool things (and getting noticed for doing cool things!). You can definitely tell there are some Xbox LIVE Indie game developers starting to make some names for themselves. Can’t wait to name drop them at bars. Me- “Oh you played Game X? Yeah, I know the guy that made that. Pretty cool guy.” Yeah, I’ll be THAT guy.   Time Critical XNA News 30 days left to submit XBLIGs made in XNA Game Studio 3.1 http://blogs.msdn.com/b/xna/archive/2011/01/08/30-days-left-to-submit-xna-gs-3-1-games-to-app-hub.aspx Jeromy Walsh wants you to know his XNA 4.0 Winter Workshop starting soon, go get signed up! And the forum is now LIVE on GameDev.net http://gamedevelopedia.com/ http://tinyurl.com/4gg2cfv The XNA Team Per Nick Gravelyn, Aaron Stebner’s blog post is a must read for icons on Windows Phone http://forums.create.msdn.com/forums/p/72022/439597.aspx#439597 http://blogs.msdn.com/b/astebner/archive/2010/10/01/10070507.aspx Shawn Hargreaves writes about Sprite Billboards in a 3D world http://blogs.msdn.com/b/shawnhar/archive/2011/01/12/spritebatch-billboards-in-a-3d-world.aspx XNA MVPs Andy “The ZMan” Dunn wants YOU to come to the MVP Summit and run a 5K http://www.indiegameguy.com/blogs/zman/archive/2010/12/26/come-to-the-mvp-summit-and-run-a-5k-yes-you.aspx Jim Perry updates his forum signature just to make it clear that he’s not speaking for Microsoft or giving official information (LOL, thanks Jim, now if only people will take the time to read that...) XNA MVP | Please use the Forum Search and read the Forum FAQs | My posts are not official info http://forums.create.msdn.com/forums/p/70849/439613.aspx#439613 XNA Developers Robert Boyd (@werezombie) working hard at converting his RPG engine used to make Breath of Death VII and Chtulu Saves the World to XNA 4.0. If you haven’t done the upgrade yet yourself, might be useful to read back through his tweets and recent forum posts to see the problems/solutions he’s encountered. http://forums.create.msdn.com/forums/p/71834/438099.aspx#438099 http://www.twitter.com/werezompire SpynDoctorGames is in the final phase before the release of Your Doodles are Bugged for the PC! Going to be interesting to watch as more XNA game developers explore the PC game market for their games. http://twitter.com/SpynDoctorGames/statuses/24503173217521664 http://www.spyn-doctor.de @DrMistry shares some details of his next title YoYoYo http://www.mstargames.co.uk/mistryblogmain/35-genblog/177-a-new-year-a-new-game-and-maybe-a-new-approach.html Travis Woodward (@RabidLionGames) has a blog post coming this weekend on Farseer and Mario-like platformer movement. http://twitter.com/RabidLionGames/statuses/24992762021548032 http://www.rabidlion.com/ S4G Interview with Radiangames http://n4g.com/news/679492/s4g-interview-with-radiangames XBLAratings.com interviews Steve Flores (@DragonDivide) developer of Alpha Squad http://www.xblaratings.com/developer-qaa/3621-alpha-squad-developer-interview XBox LIVE Indie Games If you haven’t been reading the roundups on IndieGames by NaviFairy on GayGamer, you’ve been missing out! http://gaygamer.net/2011/01/xbox_indie_review_roundup_1112.html Armless Octopus posts the Top 20 Games of 2010 Part 1 http://www.armlessoctopus.com/2011/01/10/top-20-xbox-live-indie-games-of-2010-part-1/ Armless Octopus posts the Top 20 Games of 2010 Part 2 http://www.armlessoctopus.com/2011/01/12/top-20-xbox-live-indie-games-of-2010-%E2%80%93-part-2/ Xbox LIVE Indie Game Reviews http://www.gamemarx.com/ Don’t forget to be following @XboxHornet . That’s a great way to snag free copies of Xbox LIVE Indie Games http://twitter.com/XboxHornet/statuses/24471103808208896 http://www.xboxhornet.com/wordpress/ Xbox LIVE Indie Game Review posts the top 20 Xbox 360 LIVE Indie Games of 2010 http://www.xbox-360-community-games-reviews.com/top-20-best-xbox-360-live-indie-games-of-2010/ VVGtv to Stream #XBLIG Again! Help out if you can. http://vvgtv.com/2011/01/07/vvgtv-to-stream-xblig-again/ Indie Gamer Magazine Issue 14 has a look at the Xbox LIVE Winter Indie Game Uprisiing http://www.indiegamemag.com/issue14/ XNA Game Development Andrew Russell announced and asked for help in his development of ExEn: XNA for iPhone, Android and Silverlight http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight App Hub forums letting you down? Don’t forget about StackOverflow and the game development specific version gamedev.stackexchange http://stackoverflow.com/questions/tagged/xna http://gamedev.stackexchange.com/questions/tagged/xna Transmute gets an update from Aaron Foley (@slyprid) and you can now add and visually edit parallax layers to your 2D tile game. http://twitpic.com/3nudj0 http://twitter.com/slyprid/statuses/23418379574448128 http://forgottenstarstudios.com/Transmute/default.html Webcomics Weekly #75 touches on some feelings I’ve seen people try to express (myself included) when talking about game development and what types of games should be released for XBLIG http://www.pvponline.com/2011/01/05/webcomics-weekly-75-sour-oats/ Setting up a new PC for XNA development? Here’s a site that helps you quickly build a installer for all the most common applications developers use. http://ninite.com/ Fun wew thread on the XNA forums asking XBLIG/XNA developers just what their Top 10 favorite video games of all time are. http://forums.create.msdn.com/forums/107.aspx Christopher Hill (@Xalterax) stumbled across an entire community that does nothing but create box art. This is a great potential resource for Xbox LIVE Indie Game developers to get some awesome box art for their games. http://forums.create.msdn.com/forums/p/46582/441451.aspx#441451 http://www.vgboxart.com/browse/plat/360/ Don’t forget about the XNA Wiki, fantastic community resource (and roll up those sleeves and contribute already!) http://xnawiki.com/index.php?title=Main_Page

  Read the article

• Parallel LINQ - PLINQ

  - by nmarun

  Turns out now with .net 4.0 we can run a query like a multi-threaded application. Say you want to query a collection of objects and return only those that meet certain conditions. Until now, we basically had one ‘control’ that iterated over all the objects in the collection, checked the condition on each object and returned if it passed. We obviously agree that if we can ‘break’ this task into smaller ones, assign each task to a different ‘control’ and ask all the controls to do their job - in-parallel, the time taken the finish the entire task will be much lower. Welcome to PLINQ. Let’s take some examples. I have the following method that uses our good ol’ LINQ. 1: private static void Linq(int lowerLimit, int upperLimit) 2: { 3: // populate an array with int values from lowerLimit to the upperLimit 4: var source = Enumerable.Range(lowerLimit, upperLimit); 5:  6: // Start a timer 7: Stopwatch stopwatch = new Stopwatch(); 8: stopwatch.Start(); 9:  10: // set the expectation => build the expression tree 11: var evenNumbers =   from num in source 12: where IsDivisibleBy(num, 2) 13: select num; 14: 15: // iterate over and print the returned items 16: foreach (var number in evenNumbers) 17: { 18: Console.WriteLine(string.Format("** {0}", number)); 19: } 20:  21: stopwatch.Stop(); 22:  23: // check the metrics 24: Console.WriteLine(String.Format("Elapsed {0}ms", stopwatch.ElapsedMilliseconds)); 25: } I’ve added comments for the major steps, but the only thing I want to talk about here is the IsDivisibleBy() method. I know I could have just included the logic directly in the where clause. I called a method to add ‘delay’ to the execution of the query - to simulate a loooooooooong operation (will be easier to compare the results). 1: private static bool IsDivisibleBy(int number, int divisor) 2: { 3: // iterate over some database query 4: // to add time to the execution of this method; 5: // the TableB has around 10 records 6: for (int i = 0; i < 10; i++) 7: { 8: DataClasses1DataContext dataContext = new DataClasses1DataContext(); 9: var query = from b in dataContext.TableBs select b; 10: 11: foreach (var row in query) 12: { 13: // Do NOTHING (wish my job was like this) 14: } 15: } 16:  17: return number % divisor == 0; 18: } Now, let’s look at how to modify this to PLINQ. 1: private static void Plinq(int lowerLimit, int upperLimit) 2: { 3: // populate an array with int values from lowerLimit to the upperLimit 4: var source = Enumerable.Range(lowerLimit, upperLimit); 5:  6: // Start a timer 7: Stopwatch stopwatch = new Stopwatch(); 8: stopwatch.Start(); 9:  10: // set the expectation => build the expression tree 11: var evenNumbers = from num in source.AsParallel() 12: where IsDivisibleBy(num, 2) 13: select num; 14:  15: // iterate over and print the returned items 16: foreach (var number in evenNumbers) 17: { 18: Console.WriteLine(string.Format("** {0}", number)); 19: } 20:  21: stopwatch.Stop(); 22:  23: // check the metrics 24: Console.WriteLine(String.Format("Elapsed {0}ms", stopwatch.ElapsedMilliseconds)); 25: } That’s it, this is now in PLINQ format. Oh and if you haven’t found the difference, look line 11 a little more closely. You’ll see an extension method ‘AsParallel()’ added to the ‘source’ variable. Couldn’t be more simpler right? So this is going to improve the performance for us. Let’s test it. So in my Main method of the Console application that I’m working on, I make a call to both. 1: static void Main(string[] args) 2: { 3: // set lower and upper limits 4: int lowerLimit = 1; 5: int upperLimit = 20; 6: // call the methods 7: Console.WriteLine("Calling Linq() method"); 8: Linq(lowerLimit, upperLimit); 9: 10: Console.WriteLine(); 11: Console.WriteLine("Calling Plinq() method"); 12: Plinq(lowerLimit, upperLimit); 13:  14: Console.ReadLine(); // just so I get enough time to read the output 15: } YMMV, but here are the results that I got:    It’s quite obvious from the above results that the Plinq() method is taking considerably less time than the Linq() version. I’m sure you’ve already noticed that the output of the Plinq() method is not in order. That’s because, each of the ‘control’s we sent to fetch the results, reported with values as and when they obtained them. This is something about parallel LINQ that one needs to remember – the collection cannot be guaranteed to be undisturbed. This could be counted as a negative about PLINQ (emphasize ‘could’). Nevertheless, if we want the collection to be sorted, we can use a SortedSet (.net 4.0) or build our own custom ‘sorter’. Either way we go, there’s a good chance we’ll end up with a better performance using PLINQ. And there’s another negative of PLINQ (depending on how you see it). This is regarding the CPU cycles. See the usage for Linq() method (used ResourceMonitor): I have dual CPU’s and see the height of the peak in the bottom two blocks and now compare to what happens when I run the Plinq() method. The difference is obvious. Higher usage, but for a shorter duration (width of the peak). Both these points make sense in both cases. Linq() runs for a longer time, but uses less resources whereas Plinq() runs for a shorter time and consumes more resources. Even after knowing all these, I’m still inclined towards PLINQ. PLINQ rocks! (no hard feelings LINQ)

  Read the article

• MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

  - by Bertrand Matthelié

  Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• SQL SERVER – What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1

  - by Pinal Dave

  This is the first part of the series Incremental Statistics. Here is the index of the complete series. What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1 Simple Example of Incremental Statistics – Performance improvements in SQL Server 2014 – Part 2 DMV to Identify Incremental Statistics – Performance improvements in SQL Server 2014 – Part 3 Statistics are considered one of the most important aspects of SQL Server Performance Tuning. You might have often heard the phrase, with related to performance tuning. “Update Statistics before you take any other steps to tune performance”. Honestly, I have said above statement many times and many times, I have personally updated statistics before I start to do any performance tuning exercise. You may agree or disagree to the point, but there is no denial that Statistics play an extremely vital role in the performance tuning. SQL Server 2014 has a new feature called Incremental Statistics. I have been playing with this feature for quite a while and I find that very interesting. After spending some time with this feature, I decided to write about this subject over here. New in SQL Server 2014 – Incremental Statistics Well, it seems like lots of people wants to start using SQL Server 2014′s new feature of Incremetnal Statistics. However, let us understand what actually this feature does and how it can help. I will try to simplify this feature first before I start working on the demo code. Code for all versions of SQL Server Here is the code which you can execute on all versions of SQL Server and it will update the statistics of your table. The keyword which you should pay attention is WITH FULLSCAN. It will scan the entire table and build brand new statistics for you which your SQL Server Performance Tuning engine can use for better estimation of your execution plan. UPDATE STATISTICS TableName(StatisticsName) WITH FULLSCAN Who should learn about this? Why? If you are using partitions in your database, you should consider about implementing this feature. Otherwise, this feature is pretty much not applicable to you. Well, if you are using single partition and your table data is in a single place, you still have to update your statistics the same way you have been doing. If you are using multiple partitions, this may be a very useful feature for you. In most cases, users have multiple partitions because they have lots of data in their table. Each partition will have data which belongs to itself. Now it is very common that each partition are populated separately in SQL Server. Real World Example For example, if your table contains data which is related to sales, you will have plenty of entries in your table. It will be a good idea to divide the partition into multiple filegroups for example, you can divide this table into 3 semesters or 4 quarters or even 12 months. Let us assume that we have divided our table into 12 different partitions. Now for the month of January, our first partition will be populated and for the month of February our second partition will be populated. Now assume, that you have plenty of the data in your first and second partition. Now the month of March has just started and your third partition has started to populate. Due to some reason, if you want to update your statistics, what will you do? In SQL Server 2012 and earlier version You will just use the code of WITH FULLSCAN and update the entire table. That means even though you have only data in third partition you will still update the entire table. This will be VERY resource intensive process as you will be updating the statistics of the partition 1 and 2 where data has not changed at all. In SQL Server 2014 You will just update the partition of Partition 3. There is a special syntax where you can now specify which partition you want to update now. The impact of this is that it is smartly merging the new data with old statistics and update the entire statistics without doing FULLSCAN of your entire table. This has a huge impact on performance. Remember that the new feature in SQL Server 2014 does not change anything besides the capability to update a single partition. However, there is one feature which is indeed attractive. Previously, when table data were changed 20% at that time, statistics update were triggered. However, now the same threshold is applicable to a single partition. That means if your partition faces 20% data, change it will also trigger partition level statistics update which, when merged to your final statistics will give you better performance. In summary If you are not using a partition, this feature is not applicable to you. If you are using a partition, this feature can be very helpful to you. Tomorrow: We will see working code of SQL Server 2014 Incremental Statistics. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SQL Statistics, Statistics

  Read the article

• MySQL Connect 9 Days Away – Optimizer Sessions

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following my previous blog post focusing on InnoDB talks at MySQL Connect, let us review today the sessions focusing on the MySQL Optimizer: Saturday, 11.30 am, Room Golden Gate 6: MySQL Optimizer Overview—Olav Sanstå, Oracle The goal of MySQL optimizer is to take a SQL query as input and produce an optimal execution plan for the query. This session presents an overview of the main phases of the MySQL optimizer and the primary optimizations done to the query. These optimizations are based on a combination of logical transformations and cost-based decisions. Examples of optimization strategies the presentation covers are the main query transformations, the join optimizer, the data access selection strategies, and the range optimizer. For the cost-based optimizations, an overview of the cost model and the data used for doing the cost estimations is included. Saturday, 1.00 pm, Room Golden Gate 6: Overview of New Optimizer Features in MySQL 5.6—Manyi Lu, Oracle Many optimizer features have been added into MySQL 5.6. This session provides an introduction to these great features. Multirange read, index condition pushdown, and batched key access will yield huge performance improvements on large data volumes. Structured explain, explain for update/delete/insert, and optimizer tracing will help users analyze and speed up queries. And last but not least, the session covers subquery optimizations in Release 5.6. Saturday, 7.00 pm, Room Golden Gate 4: BoF: Query Optimizations: What Is New and What Is Coming? This BoF presents common techniques for query optimization, covers what is new in MySQL 5.6, and provides a discussion forum in which attendees can tell the MySQL optimizer team which optimizations they would like to see in the future. Sunday, 1.15 pm, Room Golden Gate 8: Query Performance Comparison of MySQL 5.5 and MySQL 5.6—Øystein Grøvlen, Oracle MySQL Release 5.6 contains several improvements in the query optimizer that create improved performance for complex queries. This presentation looks at how MySQL 5.6 improves the performance of many of the queries in the DBT-3 benchmark. Based on the observed improvements, the presentation discusses what makes the specific queries perform better in Release 5.6. It describes the relevant new optimization techniques and gives examples of the types of queries that will benefit from these techniques. Sunday, 4.15 pm, Room Golden Gate 4: Powerful EXPLAIN in MySQL 5.6—Evgeny Potemkin, Oracle The EXPLAIN command of MySQL has long been a very useful tool for understanding how MySQL will execute a query. Release 5.6 of the MySQL database offers several new additions that give more-detailed information about the query plan and make it easier to understand at the same time. This presentation gives an overview of new EXPLAIN features: structured EXPLAIN in JSON format, EXPLAIN for INSERT/UPDATE/DELETE, and optimizer tracing. Examples in the session give insights into how you can take advantage of the new features. They show how these features supplement and relate to each other and to classical EXPLAIN and how and why the MySQL server chooses a particular query plan. You can check out the full program here as well as in the September edition of the MySQL newsletter. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• NoSQL Java API for MySQL Cluster: Questions & Answers

  - by Mat Keep

  The MySQL Cluster engineering team recently ran a live webinar, available now on-demand demonstrating the ClusterJ and ClusterJPA NoSQL APIs for MySQL Cluster, and how these can be used in building real-time, high scale Java-based services that require continuous availability. Attendees asked a number of great questions during the webinar, and I thought it would be useful to share those here, so others are also able to learn more about the Java NoSQL APIs. First, a little bit about why we developed these APIs and why they are interesting to Java developers. ClusterJ and Cluster JPA ClusterJ is a Java interface to MySQL Cluster that provides either a static or dynamic domain object model, similar to the data model used by JDO, JPA, and Hibernate. A simple API gives users extremely high performance for common operations: insert, delete, update, and query. ClusterJPA works with ClusterJ to extend functionality, including - Persistent classes - Relationships - Joins in queries - Lazy loading - Table and index creation from object model By eliminating data transformations via SQL, users get lower data access latency and higher throughput. In addition, Java developers have a more natural programming method to directly manage their data, with a complete, feature-rich solution for Object/Relational Mapping. As a result, the development of Java applications is simplified with faster development cycles resulting in accelerated time to market for new services. MySQL Cluster offers multiple NoSQL APIs alongside Java: - Memcached for a persistent, high performance, write-scalable Key/Value store, - HTTP/REST via an Apache module - C++ via the NDB API for the lowest absolute latency. Developers can use SQL as well as NoSQL APIs for access to the same data set via multiple query patterns – from simple Primary Key lookups or inserts to complex cross-shard JOINs using Adaptive Query Localization Marrying NoSQL and SQL access to an ACID-compliant database offers developers a number of benefits. MySQL Cluster’s distributed, shared-nothing architecture with auto-sharding and real time performance makes it a great fit for workloads requiring high volume OLTP. Users also get the added flexibility of being able to run real-time analytics across the same OLTP data set for real-time business insight. OK – hopefully you now have a better idea of why ClusterJ and JPA are available. Now, for the Q&A. Q & A Q. Why would I use Connector/J vs. ClusterJ? A. Partly it's a question of whether you prefer to work with SQL (Connector/J) or objects (ClusterJ). Performance of ClusterJ will be better as there is no need to pass through the MySQL Server. A ClusterJ operation can only act on a single table (e.g. no joins) - ClusterJPA extends that capability Q. Can I mix different APIs (ie ClusterJ, Connector/J) in our application for different query types? A. Yes. You can mix and match all of the API types, SQL, JDBC, ODBC, ClusterJ, Memcached, REST, C++. They all access the exact same data in the data nodes. Update through one API and new data is instantly visible to all of the others. Q. How many TCP connections would a SessionFactory instance create for a cluster of 8 data nodes? A. SessionFactory has a connection to the mgmd (management node) but otherwise is just a vehicle to create Sessions. Without using connection pooling, a SessionFactory will have one connection open with each data node. Using optional connection pooling allows multiple connections from the SessionFactory to increase throughput. Q. Can you give details of how Cluster J optimizes sharding to enhance performance of distributed query processing? A. Each data node in a cluster runs a Transaction Coordinator (TC), which begins and ends the transaction, but also serves as a resource to operate on the result rows. While an API node (such as a ClusterJ process) can send queries to any TC/data node, there are performance gains if the TC is where most of the result data is stored. ClusterJ computes the shard (partition) key to choose the data node where the row resides as the TC. Q. What happens if we perform two primary key lookups within the same transaction? Are they sent to the data node in one transaction? A. ClusterJ will send identical PK lookups to the same data node. Q. How is distributed query processing handled by MySQL Cluster ? A. If the data is split between data nodes then all of the information will be transparently combined and passed back to the application. The session will connect to a data node - typically by hashing the primary key - which then interacts with its neighboring nodes to collect the data needed to fulfil the query. Q. Can I use Foreign Keys with MySQL Cluster A. Support for Foreign Keys is included in the MySQL Cluster 7.3 Early Access release Summary The NoSQL Java APIs are packaged with MySQL Cluster, available for download here so feel free to take them for a spin today! Key Resources MySQL Cluster on-line demo  MySQL ClusterJ and JPA On-demand webinar  MySQL ClusterJ and JPA documentation MySQL ClusterJ and JPA whitepaper and tutorial

  Read the article

• Oracle Expands Sun Blade Portfolio for Cloud and Highly Virtualized Environments

  - by Ferhat Hatay

  Oracle announced the expansion of Sun Blade Portfolio for cloud and highly virtualized environments that deliver powerful performance and simplified management as tightly integrated systems.  Along with the SPARC T3-1B blade server, Oracle VM blade cluster reference configuration and Oracle's optimized solution for Oracle WebLogic Suite, Oracle introduced the dual-node Sun Blade X6275 M2 server module with some impressive benchmark results.   Benchmarks on the Sun Blade X6275 M2 server module demonstrate the outstanding performance characteristics critical for running varied commercial applications used in cloud and highly virtualized environments.  These include best-in-class SPEC CPU2006 results with the Intel Xeon processor 5600 series, six Fluent world records and 1.8 times the price-performance of the IBM Power 755 running NAMD, a prominent bio-informatics workload.   Benchmarks for Sun Blade X6275 M2 server module  SPEC CPU2006  The Sun Blade X6275 M2 server module demonstrated best in class SPECint_rate2006 results for all published results using the Intel Xeon processor 5600 series, with a result of 679.  This result is 97% better than the HP BL460c G7 blade, 80% better than the IBM HS22V blade, and 79% better than the Dell M710 blade.  This result demonstrates the density advantage of the new Oracle's server module for space-constrained data centers.     Sun Blade X6275M2 (2 Nodes, Intel Xeon X5670 2.93GHz) - 679 SPECint_rate2006; HP ProLiant BL460c G7 (2.93 GHz, Intel Xeon X5670) - 347 SPECint_rate2006; IBM BladeCenter HS22V (Intel Xeon X5680)  - 377 SPECint_rate2006; Dell PowerEdge M710 (Intel Xeon X5680, 3.33 GHz) - 380 SPECint_rate2006.  SPEC, SPECint, SPECfp reg tm of Standard Performance Evaluation Corporation. Results from www.spec.org as of 11/24/2010 and this report.    For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Fluent The Sun Fire X6275 M2 server module produced world-record results on each of the six standard cases in the current "FLUENT 12" benchmark test suite at 8-, 12-, 24-, 32-, 64- and 96-core configurations. These results beat the most recent QLogic score with IBM DX 360 M series platforms and QLogic "Truescale" interconnects.  Results on sedan_4m test case on the Sun Blade X6275 M2 server module are 23% better than the HP C7000 system, and 20% better than the IBM DX 360 M2; Dell has not posted a result for this test case.  Results can be found at the FLUENT website.   ANSYS's FLUENT software solves fluid flow problems, and is based on a numerical technique called computational fluid dynamics (CFD), which is used in the automotive, aerospace, and consumer products industries. The FLUENT 12 benchmark test suite consists of seven models that are well suited for multi-node clustered environments and representative of modern engineering CFD clusters. Vendors benchmark their systems with the principal objective of providing comparative performance information for FLUENT software that, among other things, depends on compilers, optimization, interconnect, and the performance characteristics of the hardware.   FLUENT application performance is representative of other commercial applications that require memory and CPU resources to be available in a scalable cluster-ready format.  FLUENT benchmark has six conventional test cases (eddy_417k, turbo_500k, aircraft_2m, sedan_4m, truck_14m, truck_poly_14m) at various core counts.   All information on the FLUENT website (http://www.fluent.com) is Copyrighted1995-2010 by ANSYS Inc. Results as of November 24, 2010. For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   NAMD Results on the Sun Blade X6275 M2 server module running NAMD (a parallel molecular dynamics code designed for high-performance simulation of large biomolecular systems) show up to a 1.8X better price/performance than IBM's Power 7-based system.  For space-constrained environments, the ultra-dense Sun Blade X6275 M2 server module provides a 1.7X better price/performance per rack unit than IBM's system.     IBM Power 755 4-way Cluster (16U). Total price for cluster: $324,212. See IBM United States Hardware Announcement 110-008, dated February 9, 2010, pp. 4, 21 and 39-46.  Sun Blade X6275 M2 8-Blade Cluster (10U). Total price for cluster:  $193,939. Price/performance and performance/RU comparisons based on f1ATPase molecule test results. Sun Blade X6275 M2 cluster: $3,568/step/sec, 5.435 step/sec/RU. IBM Power 755 cluster: $6,355/step/sec, 3.189 step/sec/U. See http://www-03.ibm.com/systems/power/hardware/reports/system_perf.html. See http://www.ks.uiuc.edu/Research/namd/performance.html for more information, results as of 11/24/10.   For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Reverse Time Migration The Reverse Time Migration is heavily used in geophysical imaging and modeling for Oil & Gas Exploration.  The Sun Blade X6275 M2 server module showed up to a 40% performance improvement over the previous generation server module with super-linear scalability to 16 nodes for the 9-Point Stencil used in this Reverse Time Migration computational kernel.  The balanced combination of Oracle's Sun Storage 7410 system with the Sun Blade X6275 M2 server module cluster showed linear scalability for the total application throughput, including the I/O and MPI communication, to produce a final 3-D seismic depth imaged cube for interpretation. The final image write time from the Sun Blade X6275 M2 server module nodes to Oracle's Sun Storage 7410 system achieved 10GbE line speed of 1.25 GBytes/second or better performance. Between subsequent runs, the effects of I/O buffer caching on the Sun Blade X6275 M2 server module nodes and write optimized caching on the Sun Storage 7410 system gave up to 1.8 GBytes/second effective write performance. The performance results and characterization of this Reverse Time Migration benchmark could serve as a useful measure for many other I/O intensive commercial applications. 3D VTI Reverse Time Migration Seismic Depth Imaging, see http://blogs.sun.com/BestPerf/entry/3d_vti_reverse_time_migration for more information, results as of 11/14/2010.                            

  Read the article

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• What Counts For a DBA: Simplicity

  - by Louis Davidson

  Too many computer processes do an apparently simple task in a bizarrely complex way. They remind me of this strip by one of my favorite artists: Rube Goldberg. In order to keep the boss from knowing one was late, a process is devised whereby the cuckoo clock kisses a live cuckoo bird, who then pulls a string, which triggers a hat flinging, which in turn lands on a rod that removes a typewriter cover…and so on. We rely on creating automated processes to keep on top of tasks. DBAs have a lot of tasks to perform: backups, performance tuning, data movement, system monitoring, and of course, avoiding being noticed.  Every day, there are many steps to perform to maintain the database infrastructure, including: checking physical structures, re-indexing tables where needed, backing up the databases, checking those backups, running the ETL, and preparing the daily reports and yes, all of these processes have to complete before you can call it a day, and probably before many others have started that same day. Some of these tasks are just naturally complicated on their own. Other tasks become complicated because the database architecture is excessively rigid, and we often discover during “production testing” that certain processes need to be changed because the written requirements barely resembled the actual customer requirements.   Then, with no time to change that rigid structure, we are forced to heap layer upon layer of code onto the problematic processes. Instead of a slight table change and a new index, we end up with 4 new ETL processes, 20 temp tables, 30 extra queries, and 1000 lines of SQL code.  Report writers then need to build reports and make magical numbers appear from those toxic data structures that are overly complex and probably filled with inconsistent data. What starts out as a collection of fairly simple tasks turns into a Goldbergian nightmare of daily processes that are likely to cause your dinner to be interrupted by the smartphone doing the vibration dance that signifies trouble at the mill. So what to do? Well, if it is at all possible, simplify the problem by either going into the code and refactoring the complex code to simple, or taking all of the processes and simplifying them into small, independent, easily-tested steps.  The former approach usually requires an agreement on changing underlying structures that requires countless mind-numbing meetings; while the latter can generally be done to any complex process without the same frustration or anger, though it will still leave you with lots of steps to complete, the ability to test each step independently will definitely increase the quality of the overall process (and with each step reporting status back, finding an actual problem within the process will be definitely less unpleasant.) We all know the principle behind simplifying a sequence of processes because we learned it in math classes in our early years of attending school, starting with elementary school. In my 4 years (ok, 9 years) of undergraduate work, I remember pretty much one thing from my many math classes that I apply daily to my career as a data architect, data programmer, and as an occasional indentured DBA: “show your work”. This process of showing your work was my first lesson in simplification. Each step in the process was in fact, far simpler than the entire process.  When you were working an equation that took both sides of 4 sheets of paper, showing your work was important because the teacher could see every step, judge it, and mark it accordingly.  So often I would make an error in the first few lines of a problem which meant that the rest of the work was actually moving me closer to a very wrong answer, no matter how correct the math was in the subsequent steps. Yet, when I got my grade back, I would sometimes be pleasantly surprised. I passed, yet missed every problem on the test. But why? While I got the fact that 1+1=2 wrong in every problem, the teacher could see that I was using the right process. In a computer process, the process is very similar. We take complex processes, show our work by storing intermediate values, and test each step independently. When a process has 100 steps, each step becomes a simple step that is tested and verified, such that there will be 100 places where data is stored, validated, and can be checked off as complete. If you get step 1 of 100 wrong, you can fix it and be confident (that if you did your job of testing the other steps better than the one you had to repair,) that the rest of the process works. If you have 100 steps, and store the state of the process exactly once, the resulting testable chunk of code will be far more complex and finding the error will require checking all 100 steps as one, and usually it would be easier to find a specific needle in a stack of similarly shaped needles.  The goal is to strive for simplicity either in the solution, or at least by simplifying every process down to as many, independent, testable, simple tasks as possible.  For the tasks that really can’t be done completely independently, minimally take those tasks and break them down into simpler steps that can be tested independently.  Like working out division problems longhand, have each step of the larger problem verified and tested.

  Read the article

• ASP.NET MVC3 checkbox dropdownlist create [migrated]

  - by user95381

  i'm new in asp.net MVC and I/m use view model to poppulate the dropdown list and group of checkboxes. I use SQL Server 2012, where have many to many relationships between Students - Books; Student - Cities. I need collect StudentName, one city and many books for one student. I have next questions: 1. How can I get the values from database to my StudentBookCityViewModel? 2. How can I save the values to my database in [HttpPost] Create method? Here is the code: MODEL public class Student { public int StudentId { get; set; } public string StudentName { get; set; } public ICollection<Book> Books { get; set; } public ICollection<City> Cities { get; set; } } public class Book { public int BookId { get; set; } public string BookName { get; set; } public bool IsSelected { get; set; } public ICollection<Student> Students { get; set; } } public class City { public int CityId { get; set; } public string CityName { get; set; } public bool IsSelected { get; set; } public ICollection<Student> Students { get; set; } } VIEW MODEL public class StudentBookCityViewModel { public string StudentName { get; set; } public IList<Book> Books { get; set; } public StudentBookCityViewModel() { Books = new[] { new Book {BookName = "Title1", IsSelected = false}, new Book {BookName = "Title2", IsSelected = false}, new Book {BookName = "Title3", IsSelected = false} }.ToList(); } public string City { get; set; } public IEnumerable<SelectListItem> CityValues { get { return new[] { new SelectListItem {Value = "Value1", Text = "Text1"}, new SelectListItem {Value = "Value2", Text = "Text2"}, new SelectListItem {Value = "Value3", Text = "Text3"} }; } } } Context public class EFDbContext : DbContext{ public EFDbContext(string connectionString) { Database.Connection.ConnectionString = connectionString; } public DbSet<Book> Books { get; set; } public DbSet<Student> Students { get; set; } public DbSet<City> Cities { get; set; } protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Entity<Book>() .HasMany(x => x.Students).WithMany(x => x.Books) .Map(x => x.MapLeftKey("BookId").MapRightKey("StudentId").ToTable("StudentBooks")); modelBuilder.Entity<City>() .HasMany(x => x.Students).WithMany(x => x.Cities) .Map(x => x.MapLeftKey("CityId").MapRightKey("StudentId").ToTable("StudentCities")); } } Controller public ActionResult Create() { return View(); } [HttpPost] public ActionResult Create() { //I don't understand how I can save values to db context.SaveChanges(); return RedirectToAction("Index"); } View @model UsingEFNew.ViewModels.StudentBookCityViewModel @using (Html.BeginForm()) { Your Name: @Html.TextBoxFor(model = model.StudentName) <div>Genre:</div> <div> @Html.DropDownListFor(model => model.City, Model.CityValues) </div> <div>Books:</div> <div> @for (int i = 0; i < Model.Books.Count; i++) { <div> @Html.HiddenFor(x => x.Books[i].BookId) @Html.CheckBoxFor(x => x.Books[i].IsSelected) @Html.LabelFor(x => x.Books[i].IsSelected, Model.Books[i].BookName) </div> } </div> <div> <input id="btnSubmit" type="submit" value="Submit" /> </div> </div> }

  Read the article

• Curing the Database-Application mismatch

  - by Phil Factor

  If an application requires access to a database, then you have to be able to deploy it so as to be version-compatible with the database, in phase. If you can deploy both together, then the application and database must normally be deployed at the same version in which they, together, passed integration and functional testing.  When a single database supports more than one application, then the problem gets more interesting. I’ll need to be more precise here. It is actually the application-interface definition of the database that needs to be in a compatible ‘version’.  Most databases that get into production have no separate application-interface; in other words they are ‘close-coupled’.  For this vast majority, the whole database is the application-interface, and applications are free to wander through the bowels of the database scot-free.  If you’ve spurned the perceived wisdom of application architects to have a defined application-interface within the database that is based on views and stored procedures, any version-mismatch will be as sensitive as a kitten.  A team that creates an application that makes direct access to base tables in a database will have to put a lot of energy into keeping Database and Application in sync, to say nothing of having to tackle issues such as security and audit. It is not the obvious route to development nirvana. I’ve been in countless tense meetings with application developers who initially bridle instinctively at the apparent restrictions of being ‘banned’ from the base tables or routines of a database.  There is no good technical reason for needing that sort of access that I’ve ever come across.  Everything that the application wants can be delivered via a set of views and procedures, and with far less pain for all concerned: This is the application-interface.  If more than zero developers are creating a database-driven application, then the project will benefit from the loose-coupling that an application interface brings. What is important here is that the database development role is separated from the application development role, even if it is the same developer performing both roles. The idea of an application-interface with a database is as old as I can remember. The big corporate or government databases generally supported several applications, and there was little option. When a new application wanted access to an existing corporate database, the developers, and myself as technical architect, would have to meet with hatchet-faced DBAs and production staff to work out an interface. Sure, they would talk up the effort involved for budgetary reasons, but it was routine work, because it decoupled the database from its supporting applications. We’d be given our own stored procedures. One of them, I still remember, had ninety-two parameters. All database access was encapsulated in one application-module. If you have a stable defined application-interface with the database (Yes, one for each application usually) you need to keep the external definitions of the components of this interface in version control, linked with the application source,  and carefully track and negotiate any changes between database developers and application developers.  Essentially, the application development team owns the interface definition, and the onus is on the Database developers to implement it and maintain it, in conformance.  Internally, the database can then make all sorts of changes and refactoring, as long as source control is maintained.  If the application interface passes all the comprehensive integration and functional tests for the particular version they were designed for, nothing is broken. Your performance-testing can ‘hang’ on the same interface, since databases are judged on the performance of the application, not an ‘internal’ database process. The database developers have responsibility for maintaining the application-interface, but not its definition,  as they refactor the database. This is easily tested on a daily basis since the tests are normally automated. In this setting, the deployment can proceed if the more stable application-interface, rather than the continuously-changing database, passes all tests for the version of the application. Normally, if all goes well, a database with a well-designed application interface can evolve gracefully without changing the external appearance of the interface, and this is confirmed by integration tests that check the interface, and which hopefully don’t need to be altered at all often.  If the application is rapidly changing its ‘domain model’  in the light of an increased understanding of the application domain, then it can change the interface definitions and the database developers need only implement the interface rather than refactor the underlying database.  The test team will also have to redo the functional and integration tests which are, of course ‘written to’ the definition.  The Database developers will find it easier if these tests are done before their re-wiring  job to implement the new interface. If, at the other extreme, an application receives no further development work but survives unchanged, the database can continue to change and develop to keep pace with the requirements of the other applications it supports, and needs only to take care that the application interface is never broken. Testing is easy since your automated scripts to test the interface do not need to change. The database developers will, of course, maintain their own source control for the database, and will be likely to maintain versions for all major releases. However, this will not need to be shared with the applications that the database servers. On the other hand, the definition of the application interfaces should be within the application source. Changes in it have to be subject to change-control procedures, as they will require a chain of tests. Once you allow, instead of an application-interface, an intimate relationship between application and database, we are in the realms of impedance mismatch, over and above the obvious security problems.  Part of this impedance problem is a difference in development practices. Whereas the application has to be regularly built and integrated, this isn’t necessarily the case with the database.  An RDBMS is inherently multi-user and self-integrating. If the developers work together on the database, then a subsequent integration of the database on a staging server doesn’t often bring nasty surprises. A separate database-integration process is only needed if the database is deliberately built in a way that mimics the application development process, but which hampers the normal database-development techniques.  This process is like demanding a official walking with a red flag in front of a motor car.  In order to closely coordinate databases with applications, entire databases have to be ‘versioned’, so that an application version can be matched with a database version to produce a working build without errors.  There is no natural process to ‘version’ databases.  Each development project will have to define a system for maintaining the version level. A curious paradox occurs in development when there is no formal application-interface. When the strains and cracks happen, the extra meetings, bureaucracy, and activity required to maintain accurate deployments looks to IT management like work. They see activity, and it looks good. Work means progress.  Management then smile on the design choices made. In IT, good design work doesn’t necessarily look good, and vice versa.

  Read the article

• CodePlex Daily Summary for Wednesday, May 19, 2010

  CodePlex Daily Summary for Wednesday, May 19, 2010New Projects3FD - Framework For Fast Development: This is a C++ framework that provides a solid error handling structure, garbage collection, multi-threading and portability between compilers. The ...ali test project: test projectAttribute Builder: The Attribute Builder builds an attribute from a lambda expression because it can.BDK0008: it is a food lovers websitecgdigest: cg digest template for non-profit orgCokmez: Bilmuh cokmez duyuru sistemiDot Game: It is a dot game that our Bangladeshi people used to play at their childhood time and their last time when they are poor for working.ESRI Javascript .NET Integration: Visual Studio project that shows how to integrate the Esri Javascript API with .NET Exchange 2010 RBAC Editor (RBAC GUI): Exchange 2010 RBAC Editor (RBAC GUI) Developed in C# and using Powershell behind the scenes RBAC tool to simplfy RBAC administrationFile Validator (Validador de Archivos): Componente que permite realizar la validación de archivos (txt, imagenes, PDF, etc) actualmente solo tiene implementado la parte de los txt, permit...Grip 09 Lab4: GripjPageFlipper: This is a wonderful implementation of page flipper entirely based on HTML 5 <canvas> tag. It means that it can work in any browser that supports HT...Main project: Index bird families and associated species. Malware Analysis and Can Handler: MACH is a tool to organize and catalog your malware analysis canned responses, and to track the topic response lifecycle for forum experts.Perf Web: Performance team web sitePiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统。 PiPiBugNet代码基于ASP.NET 2.0平台开发，编程语言为C#。 PiPiBugNet界面基于Ext JS设计，提供了极佳的用户体验。RemoteDesktop: integrated remote console, desktop and chat utilityRuneScape emulation done right.: RuneScape emulator.Sandkasten: SandkastenSilverlight Metro Theme: Metro Theme for Silverlight.Silverlight Stereoscopy: Stereoscopy with Silverlight.Twitivia: Twitivia is an online trivia service that runs through twitter and is being used as an example set of projects. C#, MVC, Windows Services, Linq ...XPool: A simple school project.New ReleasesDot Game: 'Dot Game' first release: Dot Game first release This is the 'Dot Game' first release.DotNetNuke® Store: 02.01.35: What's New in this release? Bugs corrected: - Fixed a resource for the header in the Category list of the Store Admin module. - Added several test...ESRI Javascript .NET Integration: Map search results in a DataView: Visual Studio 2010 example showing how to pass Map results back to ASP.NET for use in a DataView.Exchange 2010 RBAC Editor (RBAC GUI): RBAC Editor: This binary is still beta (0.0.9.1) but in most case it's very stableExtending C# editor - Outlining, classification: first revision: a couple of bug has been eliminated, performance improvementFloe IRC Client: Floe IRC Client 2010-05 R6: Corrected bug where text would be unexpectedly copied to the clipboard.Floe IRC Client: Floe IRC Client 2010-05 R7: - Fixed bug where text would show up in a query window with someone if they said something on a channel that you are both present on.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.9 GA released: Hi, Today we have released the final version of Visifire v3.0.9 which contains the following enhancements: * Two new properties ActualAxisMin...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.2 GA Released: Hi, Today we have released the final version of Visifire v3.5.2 which contains the following enhancements: Two new properties ActualAxisMinimum a...HB Batch Encoder Mk 2: HB Batch Encoder Mk2 v1.02: Added .mov support.jPageFlipper: jPageFlipper 0.9: This is an initial community preview of jPageFlipper. It's not ready for production usage but has almost all functionality implemented.linq.js - LINQ for JavaScript: ver 2.1.0.0: Add Class Dictionary Lookup Grouping OrderedEnumerable Add Method ToDictionary MemoizeAll Share Let Add Overload ...Microsoft Research Biology Extension for Excel: MSR Biology Extension for Excel - M9: M9 Release includes the following updates to the previous release: > Import / Export support from Excel for multiple file formats > Bug fixes and ...Nifty CSharp Tools: Event Watcher: Event Watcher!Paint.NET Bulk Image Processor: Paint.NET Bulk Image Processor v1.0: This is the initial release of the Paint.NET Bulk Image processor plugin. All feedback is welcome.PiPiBugNet: PiPiBugNet架构设计: PiPiBugNet架构设计，未包含功能实现RuneScape emulation done right.: rc0: Release cantidate 0.Rx Contrib: V1.6: Adding CCR queue as adapter for the ReactiveQueue credits goes to Yuval Mazor http://blogs.microsoft.co.il/blogs/yuvmaz/Silverlight Metro Theme: Silverlight Metro Theme Alpha 1: Silverlight Metro Theme Alpha 1Silverlight Stereoscopy: Silverlight Stereoscopy Alpha 1: Silverlight Stereoscopy Alpha 20100518Stratosphere: Stratosphere 1.0.6.0: Introduced support for batch put Introduced Support for conditional updates and consistent read Added support for select conditions Brought t...VCC: Latest build, v2.1.30518.0: Automatic drop of latest buildVideo Downloader: Example Program - 1.1: Example Program showing the features of the DLL and what can be achieved using it. For DLL Version 1.1.Video Downloader: Version 1.1: Version 1.1 See Home Page for usage and more information regarding new features. Please remember changes at You-Tube can prevent this software from...WatchersNET.TagCloud: WatchersNET.TagCloud 01.06.00: Whats New New Tag Mode: Show Tags from Ventrian.com NewsArticles Module New Tag Mode: Show Tags from Ventrian.com SimpleGallery Module Hyperlin...Windows Double Explorer: WDE v0.4: -optimization -switch to new vst2010 -viewer close now by pressing escape -reorder tabs -send selected fullname or shortnames via email (eye button...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelGMap.NET - Great Maps for Windows Forms & PresentationCustomer Portal Accelerator for Microsoft Dynamics CRMBlogEngine.NETWindows Azure Command-line Tools for PHP DevelopersCassiniDev - Cassini 3.5/4.0 Developers EditionSQL Server PowerShell ExtensionsFluent Ribbon Control Suite

  Read the article

• CodePlex Daily Summary for Sunday, June 01, 2014

  CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

  Read the article

• CodePlex Daily Summary for Sunday, May 23, 2010

  CodePlex Daily Summary for Sunday, May 23, 2010New ProjectsA2Command: Apple 2 port of CBM-Command (http://cbmcommand.codeplex.com)AgUnit: AgUnit is a plugin for Jetbrains ReSharper (R#) that allows you to run and debug Silverlight unit tests from within Visual Studio.BSonPosh Powershell Module: A collection of useful Powershell functions I have written and collected over the years. It is a Powershell v2 Module composed of mostly scripts.DB Restriker: Simple tool for lookup, parsing, searching some standard databases using wildcards and pattern recognition.Entity Framework Repository & Unit of Work Template: T4 Template for Entity Framework 4 for creating a data access layer using the repository and unit of work patterns. Designed to work well with dep...Fiction Catalog: A catalog project designed to store information about fictional literature.Giving a Presentation: Useful for people doing presentations, this application hides desktop icons, disables screensaver, closes chosen programs when presentation starts,...glueless: Glueless is a local message bus which allows architect to design highly decoupled systems and applications. Glueless is a step beyond dependency i...HtmlCodeIt: Take any code and format it so that it can be viewed properly on a web browser, blog post or website.just testproject :): just have a test!KanbanTaskboard: The aim of the project is to design and implement a functional prototype for visualizing and operating a multi-platform virtual "Kanban Taskboard”Life System: Life SystemOaSys Project: Project Oasys is a project that aims to help solve desertification. Scoring of pingPong Game: Scoring of pingPong GameSilverlight Web Comic: The Silverlight Web Comic makes easier for the people create your own comic with your own pictures o drawings, and add the globes of text like the ...TickSharp: C# Wrapper for http://TickSpot.com RESTful API.Traductor: El Traductor es una aplicación de escritorio para traducción de frases entre distintos idiomas basada en la plataforma Silverlight Out Of Browser y...WatchersNET.SkinObjects.ModulActionsMenu: Displays the Module Actions Menu as a Unsorted CSS Menu.xxfd1r4w96: testingNew ReleasesAgUnit: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1.zip into the "Bin\Plugins\" folder of your ReSharper installation (default C:...ASP.NET MVC | SCAFFOLD: ASP.NET MVC SCAFFOLD - Beta 1.0: Release versão betaBizTalk Server 2006 Documenter: Documenter_v3.4.0.0: This is the new release of the documenter which has the following highlights Support for 64 bit systems Support for SxS scenarios (so now the sys...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 Beta 2- VS 2008 Replacement: The CassiniDev Visual Studio build is a fully compatibly Visual Studio 2008/2010 Development server drop-in replacement with all CassiniDev enhance...CBM-Command: 2010-05-22 Beta: Release Notes - 2010-05-22 BetaNew Features Simple text file viewer. Now when you use SHIFT-RETURN to open a file, it will ask if you want to view...Easy Validation: Documentation: Documentation for easyVal was created and presented at University of Texas at Austin in May of 2010.Entity Framework Repository & Unit of Work Template: 1.0: Initial ReleaseFrotz.NET: FrotzNet 1.0 beta: Many, many changes, including: - Got Adaptive Palette working for graphics - Got undo working - Implemented all zcodes - Added scripting as well as...Giving a Presentation: CTP: This release includes basic extensibility infrastructure and three extensions: hides desktop icons, disables screensaver, closes chosen programs wh...Gov 2.0 Kit: SharePoint 2010 MyPeeps Mysite Accelerators: SharePoint 2010 MyPeeps Mysite Accelerators. Attached are the installation and documentations files.HKGolden Express: HKGoldenExpress (Build 201005221900): New features: (None) Bug fix: Hong Kong special characters now can be posted without encoding problem. Improvements: (None) Other changes: (None) K...Intellibox - A WPF auto complete textbox search control: Beta 2: Updated the namespace of the Intellibox control from "System.Windows.Controls" to "FeserWard.Controls". Empty binding Path properties now work on...MDownloader: MDownloader-0.15.14.59111: Fixed DepositFile provider. Fixed FileFactory provider. Added simple fakeness detector (can check if .rar, .zip, .7z files have valid signature...Mute4: V1: Initial version of Mute4NLog - Advanced .NET Logging: Nightly Build 2010.05.22.003: Changes since the last build:No changes. Unit test results:Passed 191/191 (100%) Passed 191/191 (100%) Passed 214/214 (100%) Passed 216/216 (100%)...NSIS Autorun: NSIS Autorun 0.1.9: This release includes source code, executable binaries and example materials.Silverlight Gantt Chart: Silverlight Gantt Chart 1.3 (SL4): The latest release mainly makes the Gantt Chart useful in Silverlight 4 applications.SqlServerExtensions: V 0.2 beta: V 0.2 Beta release: New features available TrimStart - trim leading characters TrimEnd - trim trailing characters Remove - remove characters f...Traductor: Version 3.1: Nuevo en esta versión: El Traductor ahora permite escoger entre los motores de Microsoft y Google. El Text to Speech is es ahora habilitado por...VCC: Latest build, v2.1.30522.0: Automatic drop of latest buildVDialer Add-In for Outlook 2007 & 2010 - Dial your Vonage phone from Outlook: VDialer Add-In 1.0.3: This release adds new features related to Journal and use of Vonage API Changes in version 1.0.3 Added configurable option to automatically open J...WatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.00: First Release For Informations How To Install, the Skin Object Read the DocumentationMost Popular ProjectsCodeComment.NETRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlightpatterns & practices: Windows Azure Security GuidanceCassiniDev - Cassini 3.5/4.0 Developers EditionGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSQL Server PowerShell ExtensionsBlogEngine.NETCodeReview

  Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >