Search Results

Search found 18842 results on 754 pages for 'the machine'.

Page 625/754 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

• Abysmal transfer speeds on gigabit network

  - by Vegard Larsen

  I am having trouble getting my Gigabit network to work properly between my desktop computer and my Windows Home Server. When copying files to my server (connected through my switch), I am seeing file transfer speeds of below 10MB/s, sometimes even below 1MB/s. The machine configurations are: Desktop Intel Core 2 Quad Q6600 Windows 7 Ultimate x64 2x WD Green 1TB drives in striped RAID 4GB RAM AB9 QuadGT motherboard Realtek RTL8810SC network adapter Windows Home Server AMD Athlon 64 X2 4GB RAM 6x WD Green 1,5TB drives in storage pool Gigabyte GA-MA78GM-S2H motherboard Realtek 8111C network adapter Switch dLink Green DGS-1008D 8-port Both machines report being connected at 1Gbps. The switch lights up with green lights for those two ports, indicating 1Gbps. When connecting the machines through the switch, I am seeing insanely low speeds from WHS to the desktop measured with iperf: 10Kbits/sec (WHS is running iperf -c, desktop is iperf -s). Using iperf the other way (WHS is iperf -s, desktop iperf -c) speeds are also bad (~20Mbits/sec). Connecting the machines directly with a patch cable, I see much higher speeds when connecting from desktop to WHS (~300 Mbits/sec), but still around 10Kbits/sec when connecting from WHS to the desktop. File transfer speeds are also much quicker (both directions). Log from desktop for iperf connection from WHS (through switch): C:\temp>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [248] local 192.168.1.32 port 5001 connected with 192.168.1.20 port 3227 [ ID] Interval Transfer Bandwidth [248] 0.0-18.5 sec 24.0 KBytes 10.6 Kbits/sec Log from desktop for iperf connection to WHS (through switch): C:\temp>iperf -c 192.168.1.20 ------------------------------------------------------------ Client connecting to 192.168.1.20, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 192.168.1.32 port 57012 connected with 192.168.1.20 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-10.3 sec 28.5 MBytes 23.3 Mbits/sec What is going on here? Unfortunately I don't have any other gigabit-capable devices to try with.

  Read the article

• Ubuntu second static IP, ifconfig, /etc/network/interfaces

  - by Schmoove

  I would like to add a second static IP to my local Ubuntu 11.10 desktop machine and have it automatically available after rebooting. So far I am successfully using ifconfig to to temporarily set up an alias for my primary network interface: # ifconfig eth1:0 192.168.178.3 up # ifconfig eth1 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.2 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:feef:a3d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:61929 errors:0 dropped:0 overruns:0 frame:0 TX packets:64034 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:45330863 (45.3 MB) TX bytes:28175192 (28.1 MB) Interrupt:42 Base address:0x4000 eth1:0 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.3 Bcast:192.168.178.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:42 Base address:0x4000 However, when I add the following to /etc/network/interfaces, the alias is not up and running as expected after a reboot: # vi /etc/network/interfaces auto eth1:0 iface eth1:0 inet static address 192.168.178.3 netmask 255.255.255.0 I would like to know what to configure to get this to work. As a side note, I am running gnome shell.

  Read the article

• Using mod_rewrite to mask /cgi-bin/abc as /def

  - by Alois Mahdal

  I have a seemingly easy task, but somehow I just can't get it to work: Some interesting lines from my httpd.conf: ... DocumentRoot "D:/opt/apache/htdocs" ... ScriptAlias /cgi-bin/ "D:/opt/apache/cgi-bin/" ... <Directory "D:/opt/apache/htdocs"> Options Indexes FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> <Directory "D:/opt/apache/cgi-bin/"> AllowOverride None Options ExecCGI Order allow,deny Allow from all </Directory> (I know it's dumb but it's only a testing machine :D.) Now, I have d:\opt\apache\cgi-bin\expired.pl and I expect GET /licensecheck.php?code=123456. And I wish to fake client into thinking it speaks with /licensecheck.php, but actually return data by \expired.pl. What I tried was setting following at the end of http.conf: RewriteEngine on RewriteRule ^/licensecheck.php$ /cgi-bin/expired.pl [T=application/x-httpd-cgi,L] ...but it keeps 404-ing me, looking for cgi-bin directory (not cgi-bin\expired.pl) in my DocumentRoot! [error] [client 127.0.0.1] script not found or unable to stat: D:/opt/apache/htdocs/cgi-bin /cgi-bin/expired.pl and all other scripts in /cgi-bin/ work as expected, Only way I could make it work was actually putting the \expired.pl to DocumentRoot, but I don't want this, I want my cgi-bin neatly separated :)

  Read the article

• Group Policy Software Installs Too Silent on Windows 7

  - by jonblock

  I'm trying to migrate a Windows XP deployment process to Windows 7. The process has been surprisingly smooth, after figuring out how to bring up a base system. We rely heavily on Group Policy software installation, which in XP can mean long periods on any given morning sitting around watching the machine install new updates. At least the typical Windows Installer message shows the user that something is indeed happening. As far as I can tell, Windows 7 retains the startup installation process (good), but eliminates the on-screen message to indicate what's happening (bad). All a user will see, possibly for a half-hour or more if they haven't restarted for a while, is the electric hamster wheel and the words "Please wait...". I forsee a significant increase in support calls... If you're familiar with msiexec.exe parameters, XP behaves like /qb-, and 7 behaves like /qn. I want the /qb- behavior back. Is there a way to re-enable the Windows Installer notices for Group Policy startup installations?

  Read the article

• How to diagnose website performance/app pool recycling with Windows 2008/IIS7

  - by ilasno

  Ok, so there are various symptoms here (clients and and our own employees complaining of intermittent slowdowns, getting 'kicked out' to login page or just having a save request not properly save the submitted data). The environment: Windows Server 2008 (Datacenter), Service Pack 2, 64-bit, 2x2.8 GHz processors, 7.5 GB RAM MS SQL Server 2008 (running on the same machine) IIS 7 There are ~10 websites running on the server, each in their own application pool - most of these pools are running in Integrated mode, 2 are in Classic, all are on .NET 2.0 and all run as ApplicationPoolIdentity. I'm trying to analyze, diagnose, and troubleshoot and am struggling with where to get more info about what could be happening. Here are some steps i have already taken: Set each application pool to recycle once per day, and removed any other automatic recycling Set a Virtual Memory Limit for each to 1024000KB (1GB) Enabled ALL 'Generate Recycle Event Log Entry' entries (Config Changes, Isapi Reported Unhealthy, Manual Recycle, Private Memory Limit Exceeded, Regular Time Interval, Request Limit Exceeded, Specific Time, Virtual Memory Limit Exceeded) I have seen the app pool processes recycle (in Task Manager) - a new one will start up, and then the first one dies off - and this has happened without the memory or time going over the settings. This is a fairly new server, and most of these came from Windows Server 2003/IIS6. Any 'next steps' for setting up information gathering, logging, diagnosing, etc. would be much appreciated! j

  Read the article

• simple apache2 reverse proxy setup not working

  - by Nick

  I know what proxy is (very high level), it's just I have never set up one, and it feels like I might be missing some big fat point here. My setup: client server (static IP), runs apache on port 80 proxy (has 2 network cards, one is on the clients network, the other one with a static IP on the server network), runs apache on port 80 I am trying to configure these three machines so that when client requests: http://proxy/machine1 It gets served server's pages at server root URL, i.e. http://server/ I can access client pages just fine. However, when I try accessing a page from the client machine, it simply gets redirected to server's IP address, which it clearly can't access since they are not on the same network: ... <meta http-equiv="REFRESH" content="0;url=http://server/machine1"></meta> <title>Redirect</title> ... My apache2 config is: LoadModule proxy_module /modules/mod_proxy.so LoadModule proxy_http_module /modules/mod_proxy_http.so ProxyRequests off <Proxy *> Order Allow,Deny Allow from all </Proxy> ProxyPass /machine1 http://server:80 <Location /machine1> ProxyPassReverse / </Location> What gives? Thanks!

  Read the article

• How to find the cause of locked user account in Windows AD domain

  - by Stephane

  After a recent incident with Outlook, I was wondering how I would most efficiently resolve the following problem: Assume a fairly typical small to medium sized AD infrastructure: several DCs, a number of internal servers and windows clients, several services using AD and LDAP for user authentication from within the DMZ (SMTP relay, VPN, Citrix, etc.) and several internal services all relying on AD for authentication (Exchange, SQL server, file and print servers, terminal services servers). You have full access to all systems but they are a bit too numerous (counting the clients) to check individually. Now assume that, for some unknown reason, one (or more) user account gets locked out due to password lockout policy every few minutes. What would be the best way to find the service/machine responsible for this ? Assuming the infrastructure is pure, standard Windows with no additional management tool and few changes from default is there any way the process of finding the cause of such lockout could be accelerated or improved ? What could be done to improve the resilient of the system against such an account lockout DOS ? Disabling account lockout is an obvious answer but then you run into the issue of users having way to easily exploitable passwords, even with complexity enforced.

  Read the article

• Vanishing Windows Desktop Shortcut Keys

  - by Henry Keiter

  The Situation Like you, I have many applications that I like to open. I've set up keyboard shortcuts for the most common, by placing a link on the desktop and setting its Shortcut Key property: This is all fine and dandy, most of the time. When I want to bring up the GIMP, I press Ctrl+Alt+G and the GIMP launches. Lovely. The Problem Sometimes--perhaps once a month per desktop shortcut--the shortcut key assignment simply vanishes. I press Ctrl+Alt+G and nothing happens, so I go check the shortcut and see that lo and behold: nothing is there. This happens regularly to all my shortcuts (not all at once). It doesn't matter what keys I assign, and there doesn't seem to be any correlation with particular applications being open or anything of that sort. This has happened on every Windows XP machine I've ever used with any regularity. Obviously what makes this issue particularly obnoxious is that it's not easily reproducible. I have searched long and hard for a solution for (or at least acknowledgement of) this problem, to no avail, so hopefully you guys know something that I don't. I did find this question, where the answers are all basically "use a third-party app", but as far as I could tell that was a slightly different issue, related to Explorer being busy. If the solution for this turns out to be the same, fine, but I'd prefer a native fix if at all possible. Note: I've tagged this with Windows in general because I seem to remember it happening on Windows 7 as well as XP, but I rarely notice it because I use the start-menu search in preference to desktop shortcuts.

  Read the article

• Cannot click send button in Outlook (+ Exchange) for unknown addresses

  - by Graphain

  Hi, I have a very unusual problem. I have Outlook 2010 connected to Exchange 2010. This can send emails perfectly to known addresses (that is, addresses in the address book or ones that have been sent to previously). However, if I put in an address that is unknown, I cannot actually click the Send button in Outlook. (it simply does nothing). Corresponding to this I get errors in the Event Log for each Send click stating "The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.". However, Outlook shows as connected the whole time, pings do not break, and I have no reason to suspect it has lost connection. To further complicate matters, Outlook is fine on all other PCs, and this was all perfect until I installed BitDefender on the PC in question and the Exchange Server. Outlook was still fine on these other PCs while BitDefender was installed, but I have removed it from the PC in question and the Server just in case (no success). Summary: Outlook encounters Exchange connectivity issues when sending to unknown (new) email addresses that prevent the Send button actually working at all. This is isolated to one machine and occurred after installation of AV/Firewall software which has since been thoroughly removed. If you have any potential solutions I'd love to hear them, as I will be resorting to reformatting the PC in question, and probably removing Exchange because I'm sick of its issues if I cannot resolve this soon. Big thanks for any help.

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to forward all the traffic sent to one of these local addresses through the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 should be not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. May be I could then do NAT forwarding of all traffic directed to fake 192.168.1.2 on eth1, rerouted to 192.168.1.1 internally? I am actually struggling with iptables, but it is too tough for me. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Why do messenger keeps coming up when I adjust screen brightness?

  - by Asaf R

  My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

  Read the article

• HAproxy with MySQL Master-Master Replication incredibly slow

  - by Yayap

  I have two MySQL servers in multi-master mode, with an HAproxy machine for simple load balancing/redundancy. When I am connected to one of the servers directly and try to update about 100,000 entries, it is completed including replication in about half a minute. When connecting through the proxy it takes usually over three whole minutes. Is it normal to have that type of latency? Is something amiss with my proxy configuration (included below)? This is getting really frustrating as I assumed the proxy would do some sort of load balancing, or at least have little to no overhead. #--------------------------------------------------------------------- # Example configuration for a possible web application. See the # full configuration options online. # # http://haproxy.1wt.eu/download/1.4/doc/configuration.txt # #--------------------------------------------------------------------- #--------------------------------------------------------------------- # Global settings #--------------------------------------------------------------------- global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local2 # chroot /var/lib/haproxy # pidfile /var/run/haproxy.pid maxconn 4096 user haproxy group haproxy daemon #debug #quiet # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode tcp log global #option tcplog option dontlognull option tcp-smart-accept option tcp-smart-connect #option http-server-close #option forwardfor except 127.0.0.0/8 #option redispatch retries 3 #timeout http-request 10s #timeout queue 1m timeout connect 400 timeout client 500 timeout server 300 #timeout http-keep-alive 10s #timeout check 10s maxconn 2000 listen mysql-cluster 0.0.0.0:3306 mode tcp balance roundrobin option tcpka option httpchk server db01 192.168.15.118:3306 weight 1 inter 1s rise 1 fall 1 server db02 192.168.15.119:3306 weight 1 inter 1s rise 1 fall 1

  Read the article

• xt_TCPMSS: bad length messages

  - by Matic

  Hey! I'm getting loads of messages like: Jun 23 10:24:20 awakening kernel: [ 1691.596823] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663362] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663495] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663588] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663671] xt_TCPMSS: bad length (1440 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.062914] xt_TCPMSS: bad length (474 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.305525] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:27 awakening kernel: [ 1698.946633] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:36 awakening kernel: [ 1707.481198] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:37 awakening kernel: [ 1708.723526] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:38 awakening kernel: [ 1709.599461] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.211052] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.260588] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.976058] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.225209] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.914961] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192696] xt_TCPMSS: bad length (1480 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192825] xt_TCPMSS: bad length (1480 bytes) In my dmesg/syslog. This linux machine is among other things used as an internet gateway. Connection is over PPPoE. I have the following line in my iptables script: $IPT -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu # PPPoE fix The frequency of this messages increased 10x when I upgraded from Debian lenny with 2.6.27 to squeeze with 2.6.32 few days ago. Why am I seeing this messages and how can I fix them?

  Read the article

• WinDbg Problem with ntoskrnl

  - by Wilf

  I've got a similar problem to "BSOD - Unable to verify timestamp for ntoskrnl.exe", in that I can't seem to get the correct symbols to read ntoskrnl. I've followed the advice given by BK1E, but still can't get a result. Text from debug below: Loading Dump File [C:\Users\XXXX\AppData\Local\Temp\WER9D78.tmp\Mini030610-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\Windows\Symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Machine Name: Kernel base = 0xfffff800`01e59000 PsLoadedModuleList = 0xfffff800`0201ddd0 Debug session time: Sat Mar 6 14:08:20.516 2010 (UTC + 0:00) System Uptime: 0 days 0:42:01.723 Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ......................... Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {11, c, 0, fffff80001ec9489} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. How do I fix this issue? OS is Windows Vista x64 SP2.

  Read the article

• Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

  - by Pukku

  This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

  Read the article

• TFS 2012: Backup Plan Fails with empty log file

  - by Vitor

  I have a Team Foundation Server 2012 installation with Power Tools, and I defined a backup plan using the wizard found in the "Database Backup Tools" in the Team Foundation Server Administration Console. I set the backup plan to do a full database backup on Sunday mornings, to another server in the network. I followed the wizard with no problems and the Backup Plan was set successfully. However when the backup runs it returns Error as result and when I go to the log file I only get the header and no further info: [Info @01:00:01.078] ==================================================================== [Info @01:00:01.078] Team Foundation Server Administration Log [Info @01:00:01.078] Version : 11.0.50727.1 [Info @01:00:01.078] DateTime : 11/25/2012 02:00:01 [Info @01:00:01.078] Type : Full Backup Activity [Info @01:00:01.078] User : <backup user> [Info @01:00:01.078] Machine : <TFS Server> [Info @01:00:01.078] System : Microsoft Windows NT 6.2.9200.0 (AMD64) [Info @01:00:01.078] ==================================================================== I can imagine it's a permission problem, but I have no idea where to start ... Can anyone help? Thank you for your time! EDIT I'm not sure if it is related, but I logged in with "backup user" in "TFS Server" and there was this crash window opened with "TFS Power Tool Shell Extension (TfsComProviderSvr) has stopped working". The full crash log is here: Problem signature: Problem Event Name: APPCRASH Application Name: TfsComProviderSvr.exe Application Version: 11.0.50727.0 Application Timestamp: 5050cd2a Fault Module Name: StackHash_e8da Fault Module Version: 6.2.9200.16420 Fault Module Timestamp: 505aaa82 Exception Code: c0000374 Exception Offset: PCH_72_FROM_ntdll+0x00040DA8 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1043 Additional Information 1: e8da Additional Information 2: e8dac447e1089515a72386afa6746972 Additional Information 3: d903 Additional Information 4: d9036f986c69f4492a70e4cf004fb44d Does it help? Thanks everyone!

  Read the article

• Recover NTFS data from a ZFS pool that was exposed as an iSCSI target

  - by David

  This was me being stupid and the data is by no means critical and is now a learning experience first, time saver second. I set up a 100GB iSCSI target via the bare bone instructions in napp-it. It's a volume LU. I then had my Windows 7 machine connect to the iSCSI target, formatted it to NTFS, and tested the performance of it with some large iso file transfers. I then unmapped the drive, reconnected to the target, and was forced to format to NTFS again. It was then I realized the files I had transferred only existed on the iSCSI target. I threw a little fit and then went about my business. When I was cleaning up my experiment I noticed in this screen: http://imgur.com/1xlcu.jpg That is my experimental target tank/iSCSI and it still has a lot of data in it. Assuming my isos are still in this pool how would I go about recovering them? While writing this I used GetDataBackup for NTFS from www.runtime.org. And while it found two previous NTFS partitions there was no data.

  Read the article

• IPv6 Routing / Subnetting

  - by nappo

  Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Hard Drive benchmark values show write very very slow

  - by John

  I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

  Read the article

• Is there an SSL equivelent to an ssh agent?

  - by Matthew J Morrison

  Here is my situation: There are a number of developers who all need to have access to be able to install ruby gems and python eggs from a remote source. Currently, we have a server inside our firewall that hosts the gems and eggs. We now want the ability to be able to install things hosted on that server outside of our firewall. Since some of the gems and eggs that we host are proprietary I would like to somewhat lock access to that machine down, as unobtrusively as possible to the developers. My first thought was using something like ssh keys. So, I spent some time looking at SSL mutual authentication. I was able to get everything set up and working correctly, testing with curl, but the unfortunate thing was that I had to pass extra arguments to curl so it knows about the certificate, key and certificate authority. I was wondering if there is anything like the ssh agent that I can set up to provide that information automatically so that I can push the certificates and keys to the developer's machines so the developers don't have to log in or provide keys each time they try to install something. Another thing that I want to avoid is having to modify the 'gem' command and the 'pip' command to provide keys when they make the http connection. Any other suggestions that may solve this problem (not related to ssl mutual auth) are also welcome. EDIT: I've been continuing to research this and I came across stunnel. I think this may be what I'm looking for, any feedback regarding stunnel would also be great!

  Read the article

• Need advice on a monitoring, reminder and warning application.

  - by cbmeeks

  I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

  Read the article

• SSH client not showing prompt after successful login

  - by user431949

  I'm having problems with my SSH client on Ubuntu 10.10. When I switch on my computer and open a Terminal and execute the command ssh user@host, it gives me a password prompt after which I enter the right password, I then get a prompt to execute my commands on the remote computer. Now the problem is, after a little while (probably around 10 minutes), the terminal window stops accepting commands (No matter what I type, nothing shows). Once this happens, I close the Terminal window and try to start all over again by opening another Terminal window. But this time around, after entering the right password, I don't get a welcome message or prompt. The cursor just keeps blinking on a new line. I ran the ssh command with -v parameter and the message I get after a successful login is: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_GB.utf8 Still the cursor keeps blinking on a new line without a prompt. However, Putty SSH client works perfectly on the same machine. Thank you very much for your time. Your help would be greating appreciated.

  Read the article

• Windows Vista: Folder options not working

  - by Thomas Matthews

  I'm running Windows Vista Service Pack 2. I have the Folder Options set to "Open each folder in the same window." (Organize | Folder Options | General). Each time I open a folder, it opens in a new window. How do I get it to open each folder in the same window? I have tried the following techniques with no success: 1. Expand number of MBAG entries in Registry. (The number is 40,000 now.) 2. Delete Bags and MBAG entries in Registry. (Rebooted machine after, still no success). 3. Change to "Open each folder in its own window". Saved, then changed back. 4. Under View tab, changed "Remember each folder's view settings": unchecked, Apply to Folders, checked, Apply to folders. 5. Applied application from Annoyances.org. Still no success. 6. Clicked on Reset Default Options, then OK. (Opening in same fold is a default option!) Still unsucessful. I want the folders to open in the same window, just like the options say.

  Read the article

• Why is OpenSSH not using the user specified in ssh_config?

  - by Jordan Evens

  I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

  Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >