Search Results

Search found 16911 results on 677 pages for 'top hat'.

Page 625/677 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

  • How can I import one Gradle script into another?

    - by Ant
    Hi all, I have a complex gradle script that wraps up a load of functionality around building and deploying a number of netbeans projects to a number of environments. The script works very well, but in essence it is all configured through half a dozen maps holding project and environment information. I want to abstract the tasks away into another file, so that I can simply define my maps in a simple build file, and import the tasks from the other file. In this way, I can use the same core tasks for a number of projects and configure those projects with a simple set of maps. Can anyone tell me how I can import one gradle file into another, in a similar manner to Ant's task? I've trawled Gradle's docs to no avail so far. Additional Info After Tom's response below, I thought I'd try and clarify exactly what I mean. Basically I have a gradle script which runs a number of subprojects. However, the subprojects are all Netbeans projects, and come with their own ant build scripts, so I have tasks in gradle to call each of these. My problem is that I have some configuration at the top of the file, such as: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] I then generate tasks such as: projects.each({ task "checkout_$it.shortname" << { // Code to for example check module out from cvs using config from 'it'. } }) I have many of these sort of task generation snippets, and all of them are generic - they entirely depend on the config in the projects list. So what I want is a way to put this in a separate script and import it in the following sort of way: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] import("tasks.gradle") // This will import and run the script so that all tasks are generated for the projects given above. So in this example, tasks.gradle will have all the generic task generation code in, and will get run for the projects defined in the main build.gradle file. In this way, tasks.gradle is a file that can be used by all large projects that consist of a number of sub-projects with Netbeans ant build files.

    Read the article

  • Tracking upstream svn changes with git-svn and github?

    - by Joseph Turian
    How do I track upstream SVN changes using git-svn and github? I used git-svn to convert an SVN repo to git on github: $ git svn clone -s http://svn.osqa.net/svnroot/osqa/ osqa $ cd osqa $ git remote add origin [email protected]:turian/osqa.git $ git push origin master I then made a few changes in my git repo, committed, and pushed to github. Now, I am on a new machine. I want to take upstream SVN changes, merge them with my github repo, and push them to my github repo. This documentation says: "If you ever lose your local copy, just run the import again with the same settings, and you’ll get another working directory with all the necessary SVN metainfo." So I did the following. But none of the commands work as desired. How do I track upstream SVN changes using git-svn and github? What am I doing wrong? $ git svn clone -s http://svn.osqa.net/svnroot/osqa/ osqa $ cd osqa $ git remote add origin [email protected]:turian/osqa.git $ git push origin master To [email protected]:turian/osqa.git ! [rejected] master -> master (non-fast forward) error: failed to push some refs to '[email protected]:turian/osqa.git' $ git pull remote: Counting objects: 21, done. remote: Compressing objects: 100% (17/17), done. remote: Total 17 (delta 7), reused 9 (delta 0) Unpacking objects: 100% (17/17), done. From [email protected]:turian/osqa * [new branch] master -> origin/master From [email protected]:turian/osqa * [new tag] master -> master You asked me to pull without telling me which branch you want to merge with, and 'branch.master.merge' in your configuration file does not tell me either. Please name which branch you want to merge on the command line and try again (e.g. 'git pull <repository> <refspec>'). See git-pull(1) for details on the refspec. ... $ /usr//lib/git-core/git-svn rebase warning: refname 'master' is ambiguous. First, rewinding head to replay your work on top of it... Applying: Added forum/management/commands/dumpsettings.py error: Ref refs/heads/master is at 6acd747f95aef6d9bce37f86798a32c14e04b82e but expected a7109d94d813b20c230a029ecd67801e6067a452 fatal: Cannot lock the ref 'refs/heads/master'. Could not move back to refs/heads/master rebase refs/remotes/trunk: command returned error: 1

    Read the article

  • How do I catch the error from my printer with PrintDocument?

    - by Scottie
    I am using the PrintDocument class to print to my Brother label printer. When I execute the Print() method, the printer starts flashing a red error light, but everything else returns successful. I can run this same code on my laser printer and everything works fine. How can I see what is causing the error on my label printer? Code: public class Test { private Font printFont; private List<string> _documentLinesToPrint = new List<string>(); public void Run() { _documentLinesToPrint.Add("Test1"); _documentLinesToPrint.Add("Test2"); printFont = new Font("Arial", 10); var pd = new PrintDocument(); pd.DefaultPageSettings.Margins = new Margins(25, 25, 25, 25); pd.DefaultPageSettings.PaperSize = new PaperSize("Label", 400, 237); var printerSettings = new System.Drawing.Printing.PrinterSettings(); printerSettings.PrinterName ="Brother QL-570 LE"; pd.PrinterSettings = printerSettings; pd.PrinterSettings.Copies = 1; pd.PrintPage += new PrintPageEventHandler(this.pd_PrintPage); pd.Print(); } // The PrintPage event is raised for each page to be printed. private void pd_PrintPage(object sender, PrintPageEventArgs ev) { float linesPerPage = 0; float yPos = 0; int count = 0; float leftMargin = ev.MarginBounds.Left; float topMargin = ev.MarginBounds.Top; string line = null; // Calculate the number of lines per page. linesPerPage = ev.MarginBounds.Height / printFont.GetHeight(ev.Graphics); // Print each line of the file. while ((count < linesPerPage) && (count < _documentLinesToPrint.Count)) { line = _documentLinesToPrint[count]; yPos = topMargin + (count * printFont.GetHeight(ev.Graphics)); ev.Graphics.DrawString(line, printFont, Brushes.Black, leftMargin, yPos, new StringFormat()); line = null; count++; } // If more lines exist, print another page. if (line != null) ev.HasMorePages = true; else ev.HasMorePages = false; } }

    Read the article

  • Binding using ElementName for a control within the Grid\ListView

    - by i2nfo
    Hi I am currently busy with a WPF application that uses a "GridView". There are several template columns one of which is a ComboBox in column 3 named cmbInputControlType. What I would like to do using my Converter class, which I have already created, is binding the visibility of the TextBox(txtFrom) in column 4 to the selected value of the ComboBox(Column 3). Basically if you select a value from the the ComboBox(cmbInputControlType - column 3), it must update teh visibility of the TextBox(txtFrom - column 4) <ListView Height="150" ScrollViewer.HorizontalScrollBarVisibility="Auto" ScrollViewer.VerticalScrollBarVisibility="Auto" Width="435" HorizontalAlignment="Center" Margin="5,0,5,5" Name="lstInput" VerticalAlignment="Top" SelectionMode="Single" HorizontalContentAlignment="Left"> <ListView.Resources> <local:InputControlTypeConverter x:Key="InputConType" /> </ListView.Resources> <ListView.View> <GridView> <!--Column 1--> <GridViewColumn Header="ParameterName" x:Name="lblParameterName" DisplayMemberBinding="{Binding ParameterName}" Width="100" /> <!--Column 2--> <GridViewColumn Header="DisplayName"> <GridViewColumn.CellTemplate> <DataTemplate> <TextBox x:Name="txtDisplayName" Width="150" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <!--Column 3--> <GridViewColumn Header="ControlType"> <GridViewColumn.CellTemplate> <DataTemplate> <ComboBox x:Name="cmbInputControlType" Width="100" SelectionChanged="cmbInputControlType_SelectionChanged" > <ComboBoxItem Content="TextBox" /> <ComboBoxItem Content="Copy" /> </ComboBox> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <!--Column 4--> <GridViewColumn Header="From"> <GridViewColumn.CellTemplate> <DataTemplate> <TextBox x:Name="txtCopyFrom" Width="150" Visibility="{Binding ElementName=cmbInputControlType,Path=SelectedItem, Converter={StaticResource InputConType}}" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <!--Column 5--> <GridViewColumn Header="To"> <GridViewColumn.CellTemplate> <DataTemplate> <TextBox x:Name="txtCopyTo" Width="150" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> </GridView> </ListView.View> </ListView>

    Read the article

  • Subroutine & GoTo design

    - by sub
    I have a strange question concerning subroutines: As I'm creating a minimal language and I don't want to add high-level loops like while or for I was planning on just adding gotos to keep it Turing-Complete. Now I thought, eww - gotos - I wouldn't want to program in that language if I had to use gotos so often. So I thought about adding subroutines instead. I see the difference as the following: gotos Go to (captain obvious) a previously defined point and continue executing the program from there. Leads to hardly understandable and buggy code, I think that's a fact. subroutines Similiar: You define their starting point somewhere, as you call them the program jumps there - but the subroutine can go back to the point it was called from with return. Okay. Why didn't I just add the more function-like, nice looking subroutines? Because: In order to make return work if I call subroutines from within subroutines from within other subroutines, I'd have to use a stack containing the point where the currently running subroutine came from at top. That would then mean that I would, if I create loops using the subroutines, end up with an extremely memory-eating, overflowing stack with return locations. Not good. Don't think of my subroutines as functions. They are just gotos that return to the point they were called from, they don't actually give back values like the return x; statement in nearly all today's languages. Now to my actual questions: How can I solve the above problem with the stack overflow on loops with subroutines? Do I have to add a separate goto language construct without the return option? Assembler doesn't have loops but as I have seen myJumpPoint:, jnz, jz, retn. That means to me that there must also be a stack containing all the return locations. Am I right with that? What about long running loops then? Don't they overflow the stack/eat memory then? Am I getting the retn symbol in assembler totally wrong? If yes, please explain it to me.

    Read the article

  • Proper binding data to combobox and handling its events.

    - by Wodzu
    Hi guys. I have a table in SQL Server which looks like this: ID Code Name Surname 1 MS Mike Smith 2 JD John Doe 3 UP Unknown Person and so on... Now I want to bind the data from this table into the ComboBox in a way that in the ComboBox I have displayed value from the Code column. I am doing the binding in this way: SqlDataAdapter sqlAdapter = new SqlDataAdapter("SELECT * FROM dbo.Users ORDER BY Code", MainConnection); sqlAdapter.Fill(dsUsers, "Users"); cbxUsers.DataSource = dsUsers.Tables["Users"]; cmUsers = (CurrencyManager)cbxUsers.BindingContext[dsUsers.Tables["Users"]]; cbxUsers.DisplayMember = "Code"; And this code seems to work. I can scroll through the list of Codes. Also I can start to write code by hand and ComboBox will autocomplete the code for me. However, I wanted to put a label at the top of the combobox to display Name and Surname of the currently selected user code. My line of though was like that: "So, I need to find an event which will fire up after the change of code in combobox and in that event I will get the current DataRow..." I was browsing through the events of combobox, tried many of them but without a success. For example: private void cbxUsers_SelectionChangeCommitted(object sender, EventArgs e) { if (cmUsers != null) { DataRowView drvCurrentRowView = (DataRowView)cmUsers.Current; DataRow drCurrentRow = drvCurrentRowView.Row; lblNameSurname.Text = Convert.ToString(drCurrentRow["Name"]) + " " + Convert.ToString(drCurrentRow["Surname"]); } } This give me a strange results. Firstly when I scroll via mouse scroll it doesn't return me the row wich I am expecting to obtain. For example on JD it shows me "Mike Smith", on MS it shows me "John Doe" and on UP it shows me "Mike Smith" again! The other problem is that when I start to type in ComboBox and press enter it doesn't trigger the event. However, everything works as expected when I bind data to lblNameSurname.Text in this way: lblNameSurname.DataBindings.Add("Text", dsusers.Tables["Users"], "Name"); The problem here is that I can bind only one column and I want to have two. I don't want to use two labels for it (one to display name and other to display surname). So, what is the solution to my problem? Also, I have one question related to the data selection in ComboBox. Now, when I type something in the combobox it allows me to type letters that are not existing in the list. For example, I start to type "J" and instead of finishing with "D" so I would have "JD", I type "Jsomerandomtexthere". Combobox will allow that but such item does not exists on the list. In other words, I want combobox to prevent user from typing code which is not on the list of codes. Thanks in advance for your time.

    Read the article

  • Two unordered list from this XML data

    - by Daniel
    Hi I have this XML: <Tekstside id="1081" level="3" nodeName="Test" urlName="test"> <umbracoRedirect /> <overskrift>Test</overskrift> <tekst></tekst> <sidensTitel /> <sidensBeskrivelse /> <sidensNgleord /> - <Faktaboks id="1113" level="4" nodeName="Det her virker" urlName="det-her-virker"> <umbracoNaviHide>1</umbracoNaviHide> - <fordele> - <values> <value>Ingen emission</value> <value>Det virker bare</value> <value>Det er top nice</value> <value>Det er bare fedt</value> <value>Udstødnings</value> <value /> </values> </fordele> - <ulemper> - <values> <value>Giver sygdom</value> <value>Er farligt</value> <value /> </values> </ulemper> </Faktaboks> </Tekstside> I want the "fordele" values and the "ulemper" values made into the unorderes lists with XSLT in Umbraco: <div class="fanda"> <ul class="for"> <li>Købsprisen</li> </ul> <ul class="against"> <li>Kortere servicerings interval pga. additivet fylder med i filteret.</li> <li>Der kan forekomme meget varieret modtryk, isærpå biler med lav - udstødningstemperatur.</li> <li>Udgifter til Additiv - typisk fra 400 - 600 kr. pr. liter.</li> <li>Kan ikke klare alle kørselsmønstre</li> </ul> </div>

    Read the article

  • Loading external pngs into an AS2 swf that is loaded into an AS3 swf wrapper

    - by James Fassett
    I have a Wrapper SWF that loads a series of AS2 movies. Each AS2 movie loads a series of .png files. AS3_wrapper.swf |-> AS2_1.swf |-> image_1.png |-> image_2.png |-> AS2_2.swf |-> image_1.png |-> image_2.png Inside of the AS2 I listen for the load of the pngs using onLoadInit and update my UI. This works fine for the first AS2 swf. But when I load the second AS2 swf the onLoadInit isn't triggered for the pngs. My guess is that the images are in a cache or something like that. I put a random string on the end of the request to try and avoid the cache but that doesn't seem to work. The code in the as2 looks roughly like this: var flagLoader:MovieClipLoader = new MovieClipLoader(); var listener:Object = new Object(); listener.onLoadInit = Delegate.create(this, handleImageLoad); flagLoader.addListener(listener); var row:MovieClip = frame1["row" + (numLoaded + 1)]; flagLoader.loadClip(predictionData[numLoaded].flag + "?r="+Math.random(), row.flag); I'm making sure to load only one image at a time (I've read anecdotal evidence loading more than one thing at a time can confuse the MovieClipLoader). For the first as2 file everything works great. When I load the second as2 file the handleImageLoad never gets called. Update: Even more perplexing is if I reload the first AS2 movie (after the second AS2 movie fails to load the images) the first AS2 movie loads the images again fine. Update 2: After trying to change from using a MovieClipLoader to polling (as was helpfully suggested) I have found some more evidence that is relevant. When I load the first AS2 files and trace from the top level clip it prints out _root. The second AS2 file when loaded traces the same _root. This lead me to check if they were clashing on names and they are. Both have a child called frame. The first one, when I trace it comes out as _root.frame as expected. The second AS2 file traces _level0.instance3.instance118.instance111.frame. I'm guessing this is related to the problem. Flash is keeping the _root of the two files the same but it is changing the locations of their children (for subsequently loaded files that have children with the same names). So either the onLoad is going to the wrong clip or the events about it loading are.

    Read the article

  • INSERT OR IGNORE in a trigger

    - by dan04
    I have a database (for tracking email statistics) that has grown to hundreds of megabytes, and I've been looking for ways to reduce it. It seems that the main reason for the large file size is that the same strings tend to be repeated in thousands of rows. To avoid this problem, I plan to create another table for a string pool, like so: CREATE TABLE AddressLookup ( ID INTEGER PRIMARY KEY AUTOINCREMENT, Address TEXT UNIQUE ); CREATE TABLE EmailInfo ( MessageID INTEGER PRIMARY KEY AUTOINCREMENT, ToAddrRef INTEGER REFERENCES AddressLookup(ID), FromAddrRef INTEGER REFERENCES AddressLookup(ID) /* Additional columns omitted for brevity. */ ); And for convenience, a view to join these tables: CREATE VIEW EmailView AS SELECT MessageID, A1.Address AS ToAddr, A2.Address AS FromAddr FROM EmailInfo LEFT JOIN AddressLookup A1 ON (ToAddrRef = A1.ID) LEFT JOIN AddressLookup A2 ON (FromAddrRef = A2.ID); In order to be able to use this view as if it were a regular table, I've made some triggers: CREATE TRIGGER trg_id_EmailView INSTEAD OF DELETE ON EmailView BEGIN DELETE FROM EmailInfo WHERE MessageID = OLD.MessageID; END; CREATE TRIGGER trg_ii_EmailView INSTEAD OF INSERT ON EmailView BEGIN INSERT OR IGNORE INTO AddressLookup(Address) VALUES (NEW.ToAddr); INSERT OR IGNORE INTO AddressLookup(Address) VALUES (NEW.FromAddr); INSERT INTO EmailInfo SELECT NEW.MessageID, A1.ID, A2.ID FROM AddressLookup A1, AddressLookup A2 WHERE A1.Address = NEW.ToAddr AND A2.Address = NEW.FromAddr; END; CREATE TRIGGER trg_iu_EmailView INSTEAD OF UPDATE ON EmailView BEGIN UPDATE EmailInfo SET MessageID = NEW.MessageID WHERE MessageID = OLD.MessageID; REPLACE INTO EmailView SELECT NEW.MessageID, NEW.ToAddr, NEW.FromAddr; END; The problem After: INSERT OR REPLACE INTO EmailView VALUES (1, '[email protected]', '[email protected]'); INSERT OR REPLACE INTO EmailView VALUES (2, '[email protected]', '[email protected]'); The updated rows contain: MessageID ToAddr FromAddr --------- ------ -------- 1 NULL [email protected] 2 [email protected] [email protected] There's a NULL that shouldn't be there. The corresponding cell in the EmailInfo table contains an orphaned ToAddrRef value. If you do the INSERTs one at a time, you'll see that Alice's ID in the AddressLookup table changes! It appears that this behavior is documented: An ON CONFLICT clause may be specified as part of an UPDATE or INSERT action within the body of the trigger. However if an ON CONFLICT clause is specified as part of the statement causing the trigger to fire, then conflict handling policy of the outer statement is used instead. So the "REPLACE" in the top-level "INSERT OR REPLACE" statement is overriding the critical "INSERT OR IGNORE" in the trigger program. Is there a way I can make it work the way that I wanted?

    Read the article

  • showing errors from actions in table-based views

    - by enashnash
    I have a view where I want to perform different actions on the items in each row in a table, similar to this (in, say, ~/Views/Thing/Manage.aspx): <table> <% foreach (thing in Model) { %> <tr> <td><%: thing.x %></td> <td> <% using (Html.BeginForm("SetEnabled", "Thing")) { %> <%: Html.Hidden("x", thing.x) %> <%: Html.Hidden("enable", !thing.Enabled) %> <input type="submit" value="<%: thing.Enabled ? "Disable" : "Enable" %>" /> <% } %> </td> <!-- more tds with similar action forms here, a few per table row --> </tr> <% } %> In my ThingController, I have functions similar to the following: public ActionResult Manage() { return View(ThingService.GetThings()); } [HttpPost] public ActionResult SetEnabled(string x, bool enable) { try { ThingService.SetEnabled(x, enable); } catch (Exception ex) { ModelState.AddModelError("", ex.Message); // I know this is wrong... } return RedirectToAction("Manage"); } In the most part, this is working fine. The problem is that if ThingService.SetEnabled throws an error, I want to be able to display the error at the top of the table. I've tried a few things with Html.ValidationSummary() in the page but I can't get it to work. Note that I don't want to send the user to a separate page to do this, and I'm trying to do it without using any javascript. Am I going about displaying my table in the best way? How do I get the errors displayed in the way I want them to? I will end up with perhaps 40 small forms on the page. This approach comes largely from this article, but it doesn't handle the errors in the way I need to. Any takers?

    Read the article

  • Writing reports with Perl

    - by georgemp
    Hi, I am trying to write out multiple report files using perl. Each file has the same structure, but with different data. So, my basic code looks something like #begin code our $log_fh; open %log_fh, ">" . $logfile our $rep; if (multipleReports) { while (@reports) { printReport($report[0]); } } sub printReports { open $rep, ">" . $[0]; printHeaders(); printBody(); close $rep; } sub printHeader() { format HDR = @>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> $generatedLine . format HDR_TOP = . $rep->format_name("HDR"); $rep->format_top_name("HDR_TOP"); $generatedLine = "test"; write($rep); $generatedLine = "next item"; write($rep); $generatedLine = "last header item"; write($rep); } sub printBody #There are multiple such sections in my code. For simplicity, I have just shown 1 here { #declare own header and header top. Set report to use these and print items to $rep } #end code The above is just a high level of the code I am using and I hope I have captured all the salient points. However, for some reason, I get the first report file output correctly. The second file instead of having in the first section test next item last item reads last item last item last item I have tried a whole lot of options primarily around autoflush, but, for the life of me can't figure out why it is doing this. I am using Perl 5.8.2. Any help/pointers much appreciated. Thanks George

    Read the article

  • Thread not behaving correctly

    - by ivor
    Hello, I wonder if anyone can help me to understand where I could be going wrong with this code; Basically I'm working on a turorial and calling the class below from another class - and it is getting the following error; Exception in thread "Thread-1" java.lang.NullPointerException at org.newdawn.spaceinvaders.TCPChat.run(TCPChat.java:322) at java.lang.Thread.run(Unknown Source) I realise the error is beibg flagged in another class- but I have tested the other class with a small class which sets up a separate thread - and it works fine, but as soon as I try and implement a new thread in this class - it causes all sorts of problems. Am I setting up the thread correctly in this class? Basically I can set up a thread in this class, with a test loop and it's fine, but when I bring in the functionality of the rest of the game it sometimes hangs, or does not display at all. Any suggestions on where I could be going wrong would be greatly appreciated. Thanks for looking. package org.newdawn.spaceinvaders; import java.awt.BorderLayout; import java.awt.Canvas; import java.awt.Color; import java.awt.Dimension; import java.awt.FlowLayout; import java.awt.Graphics2D; import java.awt.GridLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyAdapter; import java.awt.event.KeyEvent; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import java.awt.image.BufferStrategy; import java.util.ArrayList; import java.util.Scanner; import java.awt.*;//maybe not needed import javax.swing.*;//maybenot needed import java.util.Random; //import java.io.*; /** * The main hook of our game. This class with both act as a manager * for the display and central mediator for the game logic. * * Display management will consist of a loop that cycles round all * entities in the game asking them to move and then drawing them * in the appropriate place. With the help of an inner class it * will also allow the player to control the main ship. * * As a mediator it will be informed when entities within our game * detect events (e.g. alient killed, played died) and will take * appropriate game actions. * * @author Kevin Glass */ public class Game extends Canvas implements Runnable{ /** The stragey that allows us to use accelerate page flipping */ private BufferStrategy strategy; /** True if the game is currently "running", i.e. the game loop is looping */ private boolean gameRunning = true; /** The list of all the entities that exist in our game */ private ArrayList entities = new ArrayList(); /** The list of entities that need to be removed from the game this loop */ private ArrayList removeList = new ArrayList(); /** The entity representing the player */ private Entity ship; /** The speed at which the player's ship should move (pixels/sec) */ private double moveSpeed = 300; /** The time at which last fired a shot */ private long lastFire = 0; /** The interval between our players shot (ms) */ private long firingInterval = 500; /** The number of aliens left on the screen */ private int alienCount; /** The number of levels progressed */ private double levelCount; /** high score for the user */ private int highScore; /** high score for the user */ private String player = "bob"; //private GetUserInput getPlayer; /** The list of entities that need to be removed from the game this loop */ /** The message to display which waiting for a key press */ private String message = ""; /** True if we're holding up game play until a key has been pressed */ private boolean waitingForKeyPress = true; /** True if the left cursor key is currently pressed */ private boolean leftPressed = false; /** True if the right cursor key is currently pressed */ private boolean rightPressed = false; /** True if we are firing */ private boolean firePressed = false; /** True if game logic needs to be applied this loop, normally as a result of a game event */ private boolean logicRequiredThisLoop = false; //private Thread cThread = new Thread(this); //public Thread t = new Thread(this); //private Thread g = new Thread(this); void setHighscore(int setHS) { highScore = setHS; } public int getHighscore() { return highScore; } public void setPlayer(String setPlayer) { player = setPlayer; } public String getPlayer() { return player; } public void run() { //setup(); System.out.println("hello im running bob"); /*int count = 1; do { System.out.println("Count is: " + count); count++; try{Thread.sleep(1);} catch(InterruptedException e){} } while (count <= 2000000);*/ //Game g =new Game(); //Game g = this; // Start the main game loop, note: this method will not // return until the game has finished running. Hence we are // using the actual main thread to run the game. //setup(); //this.gameLoop(); //try{thread.sleep(1);} //catch{InterruptedException e} } /** * Construct our game and set it running. */ public Game () { //Thread t = new Thread(this);//set up new thread for invaders game //t.run();//run the run method of the game //Game g =new Game(); //setup(); //Thread t = new Thread(this); //thread.start(); //SwingUtilities.invokeLater(this); Thread er = new Thread(this); er.start(); } public void setup(){ //initialise highscore setHighscore(0); // create a frame to contain our game JFrame container = new JFrame("Space Invaders 101"); // get hold the content of the frame and set up the resolution of the game JPanel panel = (JPanel) container.getContentPane(); panel.setPreferredSize(new Dimension(800,600)); //panel.setLayout(null); // setup our canvas size and put it into the content of the frame setBounds(0,0,800,600); panel.add(this); // Tell AWT not to bother repainting our canvas since we're // going to do that our self in accelerated mode setIgnoreRepaint(true); // finally make the window visible container.pack(); container.setResizable(false); container.setVisible(true); // add a listener to respond to the user closing the window. If they // do we'd like to exit the game container.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent e) { //cThread.interrupt(); System.exit(0); } }); // add a key input system (defined below) to our canvas // so we can respond to key pressed addKeyListener(new KeyInputHandler()); // request the focus so key events come to us requestFocus(); // create the buffering strategy which will allow AWT // to manage our accelerated graphics createBufferStrategy(2); strategy = getBufferStrategy(); // initialise the entities in our game so there's something // to see at startup initEntities(); } /** * Start a fresh game, this should clear out any old data and * create a new set. */ private void startGame() { // clear out any existing entities and intialise a new set entities.clear(); initEntities(); //initialise highscore setHighscore(0); // blank out any keyboard settings we might currently have leftPressed = false; rightPressed = false; firePressed = false; } /** * Initialise the starting state of the entities (ship and aliens). Each * entitiy will be added to the overall list of entities in the game. */ //private void initEntities() { public void initEntities() { Random randomAlien = new Random(); // create the player ship and place it roughly in the center of the screen //ship = new ShipEntity(this,"sprites/ship.gif",370,550);//orignal ship = new ShipEntity(this,"sprites/ship.gif",700,300);//changed postioning to right hand side entities.add(ship); // create a block of aliens (5 rows, by 12 aliens, spaced evenly) alienCount = 0; levelCount = 1.02; for (int row=0;row<7;row++) {//altered number of rows for (int x=0;x<5;x++) { int r = randomAlien.nextInt(100);//loop added to produce random aliens if (r < 50){ //Entity alien = new AlienEntity(this,"sprites/alien.gif",/*100+*/(x*50),(50)+row*30); Entity alien = new AlienEntity(this,"sprites/alien.gif",100+(x*90),(12)+row*85); entities.add(alien); alienCount++; } } } } //private void initEntities() { public void initAlienEntities() { Random randomAlien = new Random(); // create the player ship and place it roughly in the center of the screen //ship = new ShipEntity(this,"sprites/ship.gif",370,550);//orignal //ship = new ShipEntity(this,"sprites/ship.gif",700,300);//changed postioning to right hand side //entities.add(ship); // create a block of aliens (5 rows, by 12 aliens, spaced evenly) alienCount = 0; levelCount = levelCount + 0.10;//this increases the speed on every level for (int row=0;row<7;row++) {//altered number of rows for (int x=0;x<5;x++) { int r = randomAlien.nextInt(100);//loop added to produce random aliens if (r < 50){//randome check to show alien //Entity alien = new AlienEntity(this,"sprites/alien.gif",/*100+*/(x*50),(50)+row*30); Entity alien = new AlienEntity(this,"sprites/alien.gif",-250+(x*90),(12)+row*85); entities.add(alien); alienCount++; } } } advanceAlienSpeed(levelCount); } /** * Notification from a game entity that the logic of the game * should be run at the next opportunity (normally as a result of some * game event) */ public void updateLogic() { logicRequiredThisLoop = true; } /** * Remove an entity from the game. The entity removed will * no longer move or be drawn. * * @param entity The entity that should be removed */ public void removeEntity(Entity entity) { removeList.add(entity); } /** * Notification that the player has died. */ public void notifyDeath() { message = "Oh no! They got you, try again?"; waitingForKeyPress = true; } /** * Notification that the player has won since all the aliens * are dead. */ public void notifyWin() { message = "Well done! You Win!"; waitingForKeyPress = true; } /** * Notification that an alien has been killed */ public void notifyAlienKilled() { // reduce the alient count, if there are none left, the player has won! alienCount--; if (alienCount == 0) { //notifyWin();win not relevant here... this.initAlienEntities();//call fresh batch of aliens } // if there are still some aliens left then they all need to get faster, so // speed up all the existing aliens advanceAlienSpeed(1.30); } public void advanceAlienSpeed(double speed) { // if there are still some aliens left then they all need to get faster, so // speed up all the existing aliens for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); if (entity instanceof AlienEntity) { // speed up by 2% entity.setHorizontalMovement(entity.getHorizontalMovement() * speed); //entity.setVerticalMovement(entity.getVerticalMovement() * 1.02); } } } /** * Attempt to fire a shot from the player. Its called "try" * since we must first check that the player can fire at this * point, i.e. has he/she waited long enough between shots */ public void tryToFire() { // check that we have waiting long enough to fire if (System.currentTimeMillis() - lastFire < firingInterval) { return; } // if we waited long enough, create the shot entity, and record the time. lastFire = System.currentTimeMillis(); ShotEntity shot = new ShotEntity(this,"sprites/shot.gif",ship.getX()+10,ship.getY()-30); entities.add(shot); } /** * The main game loop. This loop is running during all game * play as is responsible for the following activities: * <p> * - Working out the speed of the game loop to update moves * - Moving the game entities * - Drawing the screen contents (entities, text) * - Updating game events * - Checking Input * <p> */ public void gameLoop() { long lastLoopTime = System.currentTimeMillis(); // keep looping round til the game ends while (gameRunning) { // work out how long its been since the last update, this // will be used to calculate how far the entities should // move this loop long delta = System.currentTimeMillis() - lastLoopTime; lastLoopTime = System.currentTimeMillis(); // Get hold of a graphics context for the accelerated // surface and blank it out Graphics2D g = (Graphics2D) strategy.getDrawGraphics(); g.setColor(Color.black); g.fillRect(0,0,800,600); // cycle round asking each entity to move itself if (!waitingForKeyPress) { for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.move(delta); } } // cycle round drawing all the entities we have in the game for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.draw(g); } // brute force collisions, compare every entity against // every other entity. If any of them collide notify // both entities that the collision has occured for (int p=0;p<entities.size();p++) { for (int s=p+1;s<entities.size();s++) { Entity me = (Entity) entities.get(p); Entity him = (Entity) entities.get(s); if (me.collidesWith(him)) { me.collidedWith(him); him.collidedWith(me); } } } // remove any entity that has been marked for clear up entities.removeAll(removeList); removeList.clear(); // if a game event has indicated that game logic should // be resolved, cycle round every entity requesting that // their personal logic should be considered. if (logicRequiredThisLoop) { //g.drawString("Press any key",(800-g.getFontMetrics().stringWidth("Press any key"))/2,300); for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.doLogic(); } logicRequiredThisLoop = false; } // if we're waiting for an "any key" press then draw the // current message //show highscore at top of screen //show name at top of screen g.setColor(Color.white); g.drawString("Player : "+getPlayer()+" : Score : "+getHighscore(),20,20); if (waitingForKeyPress) { g.setColor(Color.white); g.drawString(message,(800-g.getFontMetrics().stringWidth(message))/2,250); g.drawString("Press any key",(800-g.getFontMetrics().stringWidth("Press any key"))/2,300); } // finally, we've completed drawing so clear up the graphics // and flip the buffer over g.dispose(); strategy.show(); // resolve the movement of the ship. First assume the ship // isn't moving. If either cursor key is pressed then // update the movement appropraitely ship.setVerticalMovement(0);//set to vertical movement if ((leftPressed) && (!rightPressed)) { ship.setVerticalMovement(-moveSpeed);//**took out setHorizaontalMOvement } else if ((rightPressed) && (!leftPressed)) { ship.setVerticalMovement(moveSpeed);//**took out setHorizaontalMOvement } // if we're pressing fire, attempt to fire if (firePressed) { tryToFire(); } // finally pause for a bit. Note: this should run us at about // 100 fps but on windows this might vary each loop due to // a bad implementation of timer try { Thread.sleep(10); } catch (Exception e) {} } } /** * A class to handle keyboard input from the user. The class * handles both dynamic input during game play, i.e. left/right * and shoot, and more static type input (i.e. press any key to * continue) * * This has been implemented as an inner class more through * habbit then anything else. Its perfectly normal to implement * this as seperate class if slight less convienient. * * @author Kevin Glass */ private class KeyInputHandler extends KeyAdapter { /** The number of key presses we've had while waiting for an "any key" press */ private int pressCount = 1; /** * Notification from AWT that a key has been pressed. Note that * a key being pressed is equal to being pushed down but *NOT* * released. Thats where keyTyped() comes in. * * @param e The details of the key that was pressed */ public void keyPressed(KeyEvent e) { // if we're waiting for an "any key" typed then we don't // want to do anything with just a "press" if (waitingForKeyPress) { return; } // if (e.getKeyCode() == KeyEvent.VK_LEFT) { ////leftPressed = true; ///} //// if (e.getKeyCode() == KeyEvent.VK_RIGHT) { //rightPressed = true; if (e.getKeyCode() == KeyEvent.VK_UP) { leftPressed = true; } if (e.getKeyCode() == KeyEvent.VK_DOWN) { rightPressed = true; } if (e.getKeyCode() == KeyEvent.VK_SPACE) { firePressed = true; } } /** * Notification from AWT that a key has been released. * * @param e The details of the key that was released */ public void keyReleased(KeyEvent e) { // if we're waiting for an "any key" typed then we don't // want to do anything with just a "released" if (waitingForKeyPress) { return; } if (e.getKeyCode() == KeyEvent.VK_UP) {//changed from VK_LEFT leftPressed = false; } if (e.getKeyCode() == KeyEvent.VK_DOWN) {//changed from VK_RIGHT rightPressed = false; } if (e.getKeyCode() == KeyEvent.VK_SPACE) { firePressed = false; } } /** * Notification from AWT that a key has been typed. Note that * typing a key means to both press and then release it. * * @param e The details of the key that was typed. */ public void keyTyped(KeyEvent e) { // if we're waiting for a "any key" type then // check if we've recieved any recently. We may // have had a keyType() event from the user releasing // the shoot or move keys, hence the use of the "pressCount" // counter. if (waitingForKeyPress) { if (pressCount == 1) { // since we've now recieved our key typed // event we can mark it as such and start // our new game waitingForKeyPress = false; startGame(); pressCount = 0; } else { pressCount++; } } // if we hit escape, then quit the game if (e.getKeyChar() == 27) { //cThread.interrupt(); System.exit(0); } } } /** * The entry point into the game. We'll simply create an * instance of class which will start the display and game * loop. * * @param argv The arguments that are passed into our game */ //public static void main(String argv[]) { //Game g =new Game(); // Start the main game loop, note: this method will not // return until the game has finished running. Hence we are // using the actual main thread to run the game. //g.gameLoop(); //} }

    Read the article

  • How do I use jQueryUI's ui-states with JSF2's h:messages?

    - by Andrew
    It seems like it should be very simple to specify that the h:messages generated by JSF should be styled using jQueryUI's nice ui-states. But sadly I can't make it fit. It seems that the jQueryUI states require several elements (div,div,p,span) in order to make it work. So taking inspiration directly from the jQueryUI theme demo page: <!-- Highlight / Error --> <h2 class="demoHeaders">Highlight / Error</h2> <div class="ui-widget"> <div class="ui-state-highlight ui-corner-all" style="margin-top: 20px; padding: 0 .7em;"> <p><span class="ui-icon ui-icon-info" style="float: left; margin-right: .3em;"></span> <strong>Hey!</strong> Sample ui-state-highlight style.</p> </div> </div> <br/> <div class="ui-widget"> <div class="ui-state-error ui-corner-all" style="padding: 0 .7em;"> <p><span class="ui-icon ui-icon-alert" style="float: left; margin-right: .3em;"></span> <strong>Alert:</strong> Sample ui-state-error style.</p> </div> </div> and trying to jam the css class details into my h:message as best I can: <div class="ui-widget"> <h:messages globalOnly="true" errorClass="ui-state-error ui-corner-all ui-icon-alert" infoClass="ui-state-highlight ui-corner-all ui-icon-info"/> </div> I don't get the icon or sufficient padding etc but the colours make it through. So, the styles are being applied but they aren't working as intended. Any idea how I can make this work?

    Read the article

  • Last Grid Column Not Auto Resizing With Grid

    - by photo_tom
    I'm having a problem with my TextBoxs not "Auto" resizing. I'm trying to create a form that behaves and looks like the Properties Editor in Visual Studio. What appears to be happening is that the third column is not expanding to fill all of the available remaining space in the grid. Image below is how my form looks on startup. The width of the textboxs is determined by the MinWidth setting on the third ColumnDefinition statement. Also, the Width is set to "*". With any other setting, the resizing done with the GridSplitter doesn't work correctly. <StackPanel Orientation="Vertical" VerticalAlignment="Top" x:Name="Stacker" Grid.IsSharedSizeScope="True"> <Expander x:Name="Expand" IsExpanded="True" Header="This is a test of a Second Panel" Width="{Binding Width, ElementName=Stacker}"> <Grid x:Name="EditGrid1" Margin="3" > <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" MinWidth="50" SharedSizeGroup="SharedSize1" /> <ColumnDefinition Width="Auto" SharedSizeGroup="SharedSize2" /> <ColumnDefinition Width="*" MinWidth="50" x:Name="ValueCol" /> </Grid.ColumnDefinitions> <GridSplitter Grid.Column="1" x:Name="ToolBoxSplitter1" Grid.Row="1" Grid.RowSpan="6" Panel.ZIndex="1" HorizontalAlignment="Stretch" ResizeBehavior="PreviousAndNext" Width="3"/> <TextBlock MaxHeight="40" Grid.Column="0" Grid.Row="1" Text="{x:Static lex:DoSomeThingView.Name}" /> <TextBlock MaxHeight="40" Grid.Column="0" Grid.Row="2" Text="{x:Static lex:DoSomeThingView.Address}" /> <TextBlock MaxHeight="40" Grid.Column="0" Grid.Row="3" Text="{x:Static lex:DoSomeThingView.Zip}" /> <TextBlock MaxHeight="40" Grid.Column="0" Grid.Row="4" Text="{x:Static lex:DoSomeThingView.NumberOfDoors}" TextTrimming="CharacterEllipsis" Grid.IsSharedSizeScope="True" /> <TextBlock MaxHeight="40" Grid.Column="0" Grid.Row="5" Text="{x:Static lex:DoSomeThingView.DoubleNumber}" /> <TextBox Grid.Column="2" Grid.Row="1" x:Name="UserName1" MaxHeight="50" TextWrapping="Wrap" VerticalScrollBarVisibility="Auto" SpellCheck.IsEnabled="True" /> <TextBox Grid.Column="2" Grid.Row="2" x:Name="Address1" /> <TextBox Grid.Column="2" Grid.Row="3" x:Name="Zip1" /> <TextBox Grid.Column="2" Grid.Row="4" x:Name="NumberOfDoors1" /> <TextBox Grid.Column="2" Grid.Row="5" x:Name="DoubleNumber1" /> </Grid> </Expander> </StackPanel> Any suggestions on how to correct this?

    Read the article

  • Keeping WPF grids from getting out of parent bounds

    - by Jonathan Perry
    In my UI, I have a big grid with two columns and one row. in the right column, I have a grid with three rows where in the top row I have a user control, and in the two bottom rows I have two Expander objects, each containing an ItemsControl with a list that gets populated in runtime. Sometimes, that list gets really long and "spills" from the screen towards the bottom. What I want to do is to allow the user to see both expanders, be able to expand or collapse them while keeping them both in sight. I tried wrapping them in WrapPanels or StackPanel but to no avail. Here's some code to help explain my problem: <Grid Grid.Row="1" x:Name="grid1"> <Grid.RowDefinitions> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Expander Grid.Row="0" Header="Expander 1" x:Name="expander1" FontSize="14" IsExpanded="True"> <Expander.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFC4C4C4" Offset="0" /> <GradientStop Color="White" Offset="1" /> </LinearGradientBrush> </Expander.Background> <ContentPresenter Content="{Binding ViewModel.OpenAlerts, ElementName=m_viewControl}" ClipToBounds="True"/> </Expander> <Expander Grid.Row="1" x:Name="expander2" Header="Expander 2" FontSize="14" IsExpanded="True"> <Expander.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFC4C4C4" Offset="0" /> <GradientStop Color="White" Offset="1" /> </LinearGradientBrush> </Expander.Background> <ContentPresenter Content="{Binding ViewModel.ClosedAlerts, ElementName=m_viewControl}" ClipToBounds="True"/> </Expander> </Grid> Any assistance or tips will be highly appreciated! Thanks, John.

    Read the article

  • How to optimize my PostgreSQL DB for prefix search?

    - by asmaier
    I have a table called "nodes" with roughly 1.7 million rows in my PostgreSQL db =#\d nodes Table "public.nodes" Column | Type | Modifiers --------+------------------------+----------- id | integer | not null title | character varying(256) | score | double precision | Indexes: "nodes_pkey" PRIMARY KEY, btree (id) I want to use information from that table for autocompletion of a search field, showing the user a list of the ten titles having the highest score fitting to his input. So I used this query (here searching for all titles starting with "s") =# explain analyze select title,score from nodes where title ilike 's%' order by score desc; QUERY PLAN ----------------------------------------------------------------------------------------------------------------------- Sort (cost=64177.92..64581.38 rows=161385 width=25) (actual time=4930.334..5047.321 rows=161264 loops=1) Sort Key: score Sort Method: external merge Disk: 5712kB -> Seq Scan on nodes (cost=0.00..46630.50 rows=161385 width=25) (actual time=0.611..4464.413 rows=161264 loops=1) Filter: ((title)::text ~~* 's%'::text) Total runtime: 5260.791 ms (6 rows) This was much to slow for using it with autocomplete. With some information from Using PostgreSQL in Web 2.0 Applications I was able to improve that with a special index =# create index title_idx on nodes using btree(lower(title) text_pattern_ops); =# explain analyze select title,score from nodes where lower(title) like lower('s%') order by score desc limit 10; QUERY PLAN ------------------------------------------------------------------------------------------------------------------------------------------ Limit (cost=18122.41..18122.43 rows=10 width=25) (actual time=1324.703..1324.708 rows=10 loops=1) -> Sort (cost=18122.41..18144.60 rows=8876 width=25) (actual time=1324.700..1324.702 rows=10 loops=1) Sort Key: score Sort Method: top-N heapsort Memory: 17kB -> Bitmap Heap Scan on nodes (cost=243.53..17930.60 rows=8876 width=25) (actual time=96.124..1227.203 rows=161264 loops=1) Filter: (lower((title)::text) ~~ 's%'::text) -> Bitmap Index Scan on title_idx (cost=0.00..241.31 rows=8876 width=0) (actual time=90.059..90.059 rows=161264 loops=1) Index Cond: ((lower((title)::text) ~>=~ 's'::text) AND (lower((title)::text) ~<~ 't'::text)) Total runtime: 1325.085 ms (9 rows) So this gave me a speedup of factor 4. But can this be further improved? What if I want to use '%s%' instead of 's%'? Do I have any chance of getting a decent performance with PostgreSQL in that case, too? Or should I better try a different solution (Lucene?, Sphinx?) for implementing my autocomplete feature?

    Read the article

  • jquerymobile conflict with autocomplete : $this.attr("href") is undefined

    - by sweets-BlingBling
    When I use jquery ui autocomplete version 1.8.5 with jquery mobile alpha 2. I get an error when I click an item from the autocomplete list: $this.attr("href") is undefined. Does anyone know any fix for it? EDITED: <html> <head> <link rel="stylesheet" type="text/css" href="css/ui-lightness/jquery-ui-1.8.custom.css"> <link rel="stylesheet" type="text/css" href="css/autocomplete.css"> </head> <body> <div id="formWrap"> <form id="messageForm" action="#"> <fieldset> <label id="toLabel">select:</label> <div id="friends" class="ui-helper-clearfix"> <input id="to" type="text"> </div> </fieldset> </form> </div> <script type="text/javascript" src="js/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="js/jquery.mobile-1.0a2.js"></script> <script type="text/javascript" src="js/jquery-ui-1.8.custom.min.js"></script> <script type="text/javascript"> $(function(){ var availableTags = [ "ActionScript", "AppleScript", "Asp", "BASIC", "C", "C++", "Clojure", "COBOL", "ColdFusion", "Erlang", "Fortran", "Groovy", "Haskell", "Java", "JavaScript", "Lisp", "Perl", "PHP", "Python", "Ruby", "Scala", "Scheme" ]; //attach autocomplete $("#to").autocomplete({ source:availableTags , //define select handler select: function(e, ui) { var contact = ui.item.value; createSpan(contact); $("#to").val("").css("top", 2); return false; } }); }); function createSpan(contact){ //create formatted friend span = $("<span>").text(contact) //add contact to contact div span.insertBefore("#to"); } </script> </body> </html>

    Read the article

  • jquery ajax error cannot find url outside of debug mode

    - by John Orlandella Jr.
    I inherited some code two weeks ago that is using the jquery.ajax method to connect to a .NET web service. Here is the piece of code give me the trouble... if (MSCTour.AppSettings.OFFLINE !== 'TRUE') { $.ajax({ url: url, data: json, type: "POST", contentType: "application/json", timeout: 10000, dataType: "json", // not "json" we'll parse success: function(res){ if (!callback) { return; } /* // *** Use json library so we can fix up MS AJAX dates */ var result = ""; if (res !== "") { try { result = $.evalJSON(res); } catch (e) { result = {}; bare = true; } } /* // *** Bare message IS result */ if (bare) { callback(result); return; } /* // *** Wrapped message contains top level object node // *** strip it off */ for (var property in result) { callback(result[property]); break; } }, error: function(xhr,status,error){ if (status === 'parsererror') {} else {return error;} }, complete: function(res, status){ if (callback) { if ((status != 'success' && status != 'error') || status === 'parsererror' || (status === 'timeout' && res !== '')) { try { result = $.secureEvalJSON(res); } catch (e) { result = {}; bare = true; } callback(res); } } return; } }); } The url variable at this point equals /testsite/service.svc/GetItems Now here is where my problem lies... When running this site out of debug mode through visual studio I am not having any problem connecting to the database through the web service and seeing all my data, for both viewing and updating. When I go through the normal web server for the same site, on the same page, no data is showing up. When I put a break on the error portion of the code above in firebug this is information I am getting in the image linked below. link text I am getting what appears to be a 404 error, but when I look on the server all of the files are in the right place... coupled with the fact that it works when in debug mode, I think I am slowly going crazy staring at these same lines of code trying to find the needle in the haystack. Any help or just a direction to look in would be greatly appreciated.

    Read the article

  • Style list of divs as 2 column layout with css

    - by Anders Svensson
    I'm trying out ASP.NET MVC 2 by going through the "NerdDinner" tutorial. But apparently version 2 of MVC doesn't create a Details page the same as in the tutorial, and you get divs with css classes on them to style. However, I want to get the style where each label is followed on the same line with the field, and I can't do it, I get them on top of each other, or if I try using floats weird things happen (probably because I don't know exactly how to use it in this situation, where every other div should be on the same line). Here's the generated html for the Details page: <fieldset> <legend>Fields</legend> <div> <div class="display-label">DinnerID</div> <div class="display-field"><%: Model.DinnerID %></div> <div class="display-label">Title</div> <div class="display-field"><%: Model.Title %></div> <div class="display-label">EventDate</div> <div class="display-field"><%: String.Format("{0:g}", Model.EventDate) %></div> <div class="display-label">Description</div> <div class="display-field"><%: Model.Description %></div> <div class="display-label">HostedBy</div> <div class="display-field"><%: Model.HostedBy %></div> <div class="display-label">ContactPhone</div> <div class="display-field"><%: Model.ContactPhone %></div> <div class="display-label">Address</div> <div class="display-field"><%: Model.Address %></div> <div class="display-label">Country</div> <div class="display-field"><%: Model.Country %></div> <div class="display-label">Latitude</div> <div class="display-field"><%: String.Format("{0:F}", Model.Latitude) %></div> <div class="display-label">Longitude</div> <div class="display-field"><%: String.Format("{0:F}", Model.Longitude) %></div> <div class="display-label">IsValid</div> <div class="display-field"><%: Model.IsValid %></div> </div> </fieldset> How do I get the display-label and display-field for each "entry" to appear on the same line?

    Read the article

  • Dealing with missing messages in JavaScript when using BOSH

    - by JamieD
    We recently went into private beta on our flagship product and had a small launch event. Unfortunately the venue had a terrible wireless connection and packets were being dropped left right and centre causing havoc with out system, basically it wasn't able to work at all! Luckily we were able to switch to a different network and rescue the demo. This highlighted something that I knew was already an issue but hadn't appreciated quite how much of an issue it could be. Our system relies heavily on BOSH and has a rather large JavaScript code base which now works rather well under good network conditions. However we need to make it work well under bad network conditions as well. Due to the way that XMPP works, a fire and forget system, it's not easy to tell if a message you sent, or were supposed to receive, was actually sent or received. For instance, we have an offer system, one user will send an offer to another over BOSH. When this message is received by the server a message is published to the offering users offers_sent PEP node and a similar message to the receiving users offers_received PEP node. While the sending user is able to tell if their offer was send (relatively) easily, if the notification to the receiving user is never received that user will never know it missed a message. A little about out JavaScript setup, it has 4 main layers: StropheJS An MVC framework for dealing with low level tasks and to build on top of An application layer which contains the app logic routes, controllers models etc. as well as a browser cache of the model data A UI layer that receives events and publishes events to and from the application layer One way to solve the missing messages issue would be to periodically check the PEP nodes for new data that the browser doesn't know about. If a new message was discovered the browsers cache would be invalidated and all new data would be requested from the server. I'm not sure this is the best way to go and it also doesn't cover all situations. We certainly don't want to get into the situation where we are sending messages to confirm the previous message was received at it's destination as this would double the network traffic. With the number of real time websites growing daily this is an issue that must have been encountered by other developers, it would be interesting to see how it's been solved by others. As far as I can see there are two situations in which messages go missing: On poor connections messages are not sent or received due to the packets being dropped Involving navigating between pages, a message is received by the browser but is not fully processed and stored in the local cache before the page is unloaded. Or a message is added to the send queue but never sent before the page is unloaded I suspect the hardest issue to solve will be number 2. Any thoughts on the subject would be much appreciated.

    Read the article

  • Dependency property does not work within a geometry in a controltemplate

    - by Erik Bongers
    I have a DepencencyProperty (a boolean) that works fine on an Ellipse, but not on an ArcSegment. Am I doing something that is not possible? Here's part of the xaml. Both the TemplateBindings of Origin and LargeArc do not work in the geometry. But the LargeArc DependencyProperty does work in the Ellipse, so my DependencyProperty seems to be set up correctly. <ControlTemplate TargetType="{x:Type nodes:TestCircle}"> <Canvas Background="AliceBlue"> <Ellipse Height="10" Width="10" Fill="Yellow" Visibility="{TemplateBinding LargeArc, Converter={StaticResource BoolToVisConverter}}"/> <Path Canvas.Left="0" Canvas.Top="0" Stroke="Black" StrokeThickness="3"> <Path.Data> <GeometryGroup> <PathGeometry> <PathFigure IsClosed="True" StartPoint="{TemplateBinding Origin}"> <LineSegment Point="150,100" /> <ArcSegment Point="140,150" IsLargeArc="{TemplateBinding LargeArc}" Size="50,50" SweepDirection="Clockwise"/> </PathFigure> </PathGeometry> </GeometryGroup> </Path.Data> </Path> </Canvas> </ControlTemplate> What I'm trying to build is a (sort of) pie-shaped usercontrol where the shape of the Pie is defined by DependencyProperties and the actual graphics used are in a template, so they can be replaced or customized. In other words: I would like the code-behind to be visual-free (which, I assume, is good separation). SOLUTION--------------------------(I'm not allowed to answer my own questions yet) I found the answer myself, and this can be useful for others encountering the same issue. This is why the TemplateBinding on the Geometry failed: A TemplateBinding will only work when binding a DependencyProperty to another DependencyProperty. Following article set me on the right track: http://blogs.msdn.com/b/liviuc/archive/2009/12/14/wpf-templatebinding-vs-relativesource-templatedparent.aspx The ArcSegment properties are no DependencyProperties. Thus, the solution to the above problem is to replace <ArcSegment Point="140,150" IsLargeArc="{TemplateBinding LargeArc}" with <ArcSegment Point="140,150" IsLargeArc="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=LargeArc}" Colin, your working example where an 'ordinary' binding was used in the geometry set me on the right track. BTW, love the infographics and the construction of your UserControl in your blogpost. And, hey, that quick tip on code snippets, and especially on that DP attribute and the separation of those DPs into a partial class file is pure gold!

    Read the article

  • Mootools Accordion nonfunctional in Opera

    - by nona
    While working as expected in all other browsers, opera refuses to tween the height of content. oddly enough, as i sat annoyed rapidly clicking it over and over again, if it's closed, and you select some text, and keep clicking the same spot long enough, sometimes it pops open. lol. seriously. ahh, it seems to sometimes open the first time clicked after the page is loaded. wth? the javascript: window.addEvent('domready', function(){ var content_height = [];i=0; $$( '.bio_accordion' ).each(function(item){ i++; content_height.push(item.getElement('.moreInfo').offsetHeight); var thisSlider = new Fx.Slide( item.getElement( '.moreInfo' ), { mode: 'horizontal' } ); thisSlider.hide(); item.getElement('.moreInfo').set('tween').tween('height', '0px'); var morph = new Fx.Morph(item.getElement( '.divToggle' )); var selected = 0; item.getElement( '.divToggle' ).addEvents({ 'mouseenter': function(){ if(!selected) this.morph('.div_highlight'); }, 'mouseleave': function(){ if(!selected) { this.morph('.divToggle'); } }, 'click': function(){ if (!selected){ if (this.getElement('.symbol').innerHTML == '+') this.getElement('.symbol').innerHTML = '-'; else this.getElement('.symbol').innerHTML = '+'; item.getElement('.moreInfo').set('tween', { duration: 1500, transition: Fx.Transitions.Bounce.easeOut }).tween('height', content_height[i]); selected = 1; thisSlider.slideIn(); } else{ if (this.getElement('.symbol').innerHTML == '+') this.getElement('.symbol').innerHTML = '-'; else this.getElement('.symbol').innerHTML = '+'; thisSlider.slideOut(); item.getElement('.moreInfo').set('tween', { duration: 1000, transition: Fx.Transitions.Bounce.easeOut }).tween('height', '0px'); selected = 0; } } }); } ); }); the html: <div class="bio_accordion"> <div class="divToggle">test<span class="symbol">-</span></div> <div class="moreInfo" style="margin-left:10px;"> aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa asdfasdfasdfasdfasdfasdfasdfasdfasdfasdfasdf aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa asdfasdfasdfasdfasdfasdfasdfasdfasdfasdfasdf aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa asdfasdfasdfasdfasdfasdfasdfasdfasdfasdfasdf </div> </div> the css: .bio_accordion { padding:0px; margin:0px; } .divToggle { cursor: pointer; color: #ffffff; background-color:#1089b5; padding: 8px; } .div_highlight { padding-left:30px; padding-right:30px; background-color:#096687; } .moreInfo { padding: 2px; padding-top:15px; padding-bottom:15px; overflow: hidden; } .symbol { float:right; }

    Read the article

  • How to set Source of s:BitmapFill dinamicaly? (FLASH BUILDER, CODE INSIDE)

    - by Ole Jak
    In Flash Builder (flex 4) I try to use next code to set selected by user (from file system) Image as a repeated background. It worked with mx:Image but I want to use cool repited capabiletis of s:BitmapFill. BTW: Technic I use also does not work with S:BitmapImage. Also FP does not return any errors. What Shall I do with my code to make it work? <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" xmlns:net="flash.net.*" minWidth="955" minHeight="600" > <fx:Script> <![CDATA[ import mx.controls.Alert; import mx.utils.ObjectUtil; private function btn_click(evt:MouseEvent):void { var arr:Array = []; arr.push(new FileFilter("Images", ".gif;*.jpeg;*.jpg;*.png")); fileReference.browse(arr); } private function fileReference_select(evt:Event):void { fileReference.load(); } private function fileReference_complete(evt:Event):void { img.source = fileReference.data; Alert.show(ObjectUtil.toString(fileReference)); } ]]> </fx:Script> <fx:Declarations> <net:FileReference id="fileReference" select="fileReference_select(event);" complete="fileReference_complete(event);" /> </fx:Declarations> <s:Rect id="backgroundRect" left="0" right="0" top="0" bottom="0"> <s:fill> <s:BitmapFill id="img" source="@Embed('1.jpg')" fillMode="repeat" /> </s:fill> </s:Rect> <mx:Button id="btn" label="Browse and preview..." click="btn_click(event);" /> </s:Application> Any ideas?

    Read the article

  • Contact Bubble EditText

    - by toobsco42
    I am trying to create contact bubbles in the MultiAutoCompleteTextView similiar to how it is implemented in the Google+ app. Below is a screen shot: . I have tried to extend the DynamicDrawableSpan class in order to get a spannable drawable in the background of a span of text public class BubbleSpan extends DynamicDrawableSpan { private Context c; public BubbleSpan(Context context) { super(); c = context; } @Override public Drawable getDrawable() { Resources res = c.getResources(); Drawable d = res.getDrawable(R.drawable.oval); d.setBounds(0, 0, 100, 20); return d; } } Where my oval.xml drawable is defined as so: <?xml version="1.0" encoding="utf-8"?> <shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="oval"> <solid android:color="#00000000"/> <stroke android:width="4dp" android:color="#99000000" android:dashWidth="4dp" android:dashGap="2dp" /> <padding android:left="7dp" android:top="7dp" android:right="7dp" android:bottom="7dp" /> <corners android:radius="4dp" /> </shape> In my Activity class that has the MulitAutoCompleteTextView, I set the bubble span like so: final Editable e = tv.getEditableText(); final SpannableStringBuilder sb = new SpannableStringBuilder(); sb.append("some sample text"); sb.setSpan(new BubbleSpan(getApplicationContext()), 0, 6, Spannable.SPAN_EXCLUSIVE_EXCLUSIVE); e.append(sb); However, instead of the oval shape displaying behind the first 6 characters in the string, the characters are not visible and there is no oval drawable in the background. If i change the BubbleSpan's getDrawable() method to use a .png instead of a shape drawable: public Drawable getDrawable() { Resources res = c.getResources(); Drawable d = res.getDrawable(android.R.drawable.bottom_bar); d.setBounds(0, 0, 100, 20); return d; } Then the .png will show up but the characters in the string that are a part of the span will not show up. How can I make it so that the characters in the span are displayed in the foreground, meanwhile a custom shape drawable gets displayed in the background? I attempted to also use an ImageSpan instead of subclassing DynamicDrawableSpan but was unsuccessful.

    Read the article

  • Execution Plan Optimization when where clause is removed then added back

    - by nmushov
    I have a stored procedure that uses a table valued function which executes in 9 seconds. If I alter the table valued function and remove the where clause, the stored procedure executes in 3 seconds. If I add the where clause back, the query still executes in 3 seconds. I took a look at the execution plans and it appears that after I remove the where clause, the execution plan includes parallelism and the scan count for 2 of my tables drops for 50000 and 65000 down to 5 and 3. After I add the where clause back, the optimized execution plan still runs unless I run DBCC FREEPROCCACHE. Questions 1. Why would SQL Server start using the optimized execution plan for both queries only when I first remove the where clause? Is there a way to force SQL Server to use this execution plan? Also, this is a paramaterized all-in-one query that uses the (Parameter is null or Parameter) in the where clause, which I believe is bad for performance. RETURNS TABLE AS RETURN ( SELECT TOP (@PageNumber * @PageSize) CASE WHEN @SortOrder = 'Expensive' THEN ROW_NUMBER() OVER (ORDER BY SellingPrice DESC) WHEN @SortOrder = 'Inexpensive' THEN ROW_NUMBER() OVER (ORDER BY SellingPrice ASC) WHEN @SortOrder = 'LowMiles' THEN ROW_NUMBER() OVER (ORDER BY Mileage ASC) WHEN @SortOrder = 'HighMiles' THEN ROW_NUMBER() OVER (ORDER BY Mileage DESC) WHEN @SortOrder = 'Closest' THEN ROW_NUMBER() OVER (ORDER BY P1.Distance ASC) WHEN @SortOrder = 'Newest' THEN ROW_NUMBER() OVER (ORDER BY [Year] DESC) WHEN @SortOrder = 'Oldest' THEN ROW_NUMBER() OVER (ORDER BY [Year] ASC) ELSE ROW_NUMBER() OVER (ORDER BY InventoryID ASC) END as rn, P1.InventoryID, P1.SellingPrice, P1.Distance, P1.Mileage, Count(*) OVER () RESULT_COUNT, dimCarStatus.[year] FROM (SELECT InventoryID, SellingPrice, Zip.Distance, Mileage, ColorKey, CarStatusKey, CarKey FROM facInventory JOIN @ZipCodes Zip ON Zip.DealerKey = facInventory.DealerKey) as P1 JOIN dimColor ON dimColor.ColorKey = P1.ColorKey JOIN dimCarStatus ON dimCarStatus.CarStatusKey = P1.CarStatusKey JOIN dimCar ON dimCar.CarKey = P1.CarKey WHERE (@ExteriorColor is NULL OR dimColor.ExteriorColor like @ExteriorColor) AND (@InteriorColor is NULL OR dimColor.InteriorColor like @InteriorColor) AND (@Condition is NULL OR dimCarStatus.Condition like @Condition) AND (@Year is NULL OR dimCarStatus.[Year] like @Year) AND (@Certified is NULL OR dimCarStatus.Certified like @Certified) AND (@Make is NULL OR dimCar.Make like @Make) AND (@ModelCategory is NULL OR dimCar.ModelCategory like @ModelCategory) AND (@Model is NULL OR dimCar.Model like @Model) AND (@Trim is NULL OR dimCar.Trim like @Trim) AND (@BodyType is NULL OR dimCar.BodyType like @BodyType) AND (@VehicleTypeCode is NULL OR dimCar.VehicleTypeCode like @VehicleTypeCode) AND (@MinPrice is NULL OR P1.SellingPrice >= @MinPrice) AND (@MaxPrice is NULL OR P1.SellingPrice < @MaxPrice) AND (@Mileage is NULL OR P1.Mileage < @Mileage) ORDER BY CASE WHEN @SortOrder = 'Expensive' THEN -SellingPrice WHEN @SortOrder = 'Inexpensive' THEN SellingPrice WHEN @SortOrder = 'LowMiles' THEN Mileage WHEN @SortOrder = 'HighMiles' THEN -Mileage WHEN @SortOrder = 'Closest' THEN P1.Distance WHEN @SortOrder = 'Newest' THEN -[YEAR] WHEN @SortOrder = 'Oldest' THEN [YEAR] ELSE InventoryID END )

    Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >