Search Results

Search found 24624 results on 985 pages for 'linux rrt'.

Page 626/985 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

• Laptop Charger Not Recognised Properly on Samsung NP900X3F

  - by user193732

  Firstly thanks for your time. Secondly, having an issue with my power charger on my Samsung Series 9 NP900X3F. When I boot into Ubuntu with the charger plugged in it recognises it as charging. When I unplug the charger after this it is still says it is charging. If I suspend in Ubuntu then plug/unplug during this suspended state it recognises it, but not during normal running. If I knew a little more I'm sure I could grab logs and find out what the difference between wake on suspend and normal running is, but alas I need help! I also am having issues with my keyboard backlight via the fn keys, but that I care about far less. Thank you very much. Linux mikey-900X3F 3.12.0-031200rc1-generic #201309161735 SMP Mon Sep 16 21:38:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux (I upgraded my kernel version to remove heinous horizontal artefacts I was getting) Happy to list more info about my system, ima bit of a noob. I did try searching however I can't find any questions at all about my system or related models with the same issue.

  Read the article

• Why ping another innet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• USB device is recognized but has no address

  - by SeanMG

  Good day folks, I'm trying to use a USRP1 with GNURadio if anyone knows what any of that is. I am running Ubuntu on a Windows 7 machine via VMware player. When I connect this USRP1 via USB 2.0 drive to Windows 7 it is recognized as Ettus Research LLC USRP1... When I connect the device to Ubuntu through VMware, it shows: usb device fffe:0002 on my removable devices. When I run lsusb I receive the following: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 004: ID fffe:0002 When I run this program that comes with the USRP driver... uhd_find_devices I receive: -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 00000000 So when I run this program, it does recognize the fact that this device is connected. However, the device has no address, no name, and has a null serial. I need to know the device address so I can run more programs in GNURadio. Does anyone know what the problem is here? Thanks!

  Read the article

• Heading Out to Oracle Open World

  - by rickramsey

  In case you haven't figured it out by now, Oracle reserves an awful lot of announcements for Oracle Open World. As a result, the show is always a lot of fun for geeks. What will the Oracle Solaris team have to say? Will the Oracle Linux team have any surprises? And what about Oracle hardware? For my part, I'll be one of the lizards at the OTN Lounge with the OTN crew, handing out t-shirts to system admins and developers, or anyone who is willing to impersonate one. I understand, not everyone can have the raw animal magnetism of a sysadmin, or the debonair sophistication of a C++ developer, so some of you have no choice but to pretend. I won't judge. I'll also be doing video interviews of as many techie people as I can corner. I've got more than 30 interviews already scheduled. Most of them will be 3-5 minutes long. I'll be asking our best technical minds what's cool about their latest technologies and what impact it will have on system admins or system developers. I'll be posting those videos here: Find OTN Systems Videos from Oracle Open World Here! We've got some great topics in mind. A dummies guide to hardware-assisted cryptography with Glenn Brunette. ZFS deduplication. The momentum building around Oracle Solaris 11, with Lynn Rohrer, plus conversations with partners who have deployed Oracle Solaris 11. Migrating to Oracle Database with SQL Developer. The whole database cloud thing. Oracle VM and, of course, Oracle Linux. So even if you can't be part of the fun, keep an eye out for the videos on our YouTube channel. - Rick Website Newsletter Facebook Twitter

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• Hybrid Graphics on Ubuntu 12.04 switching to discrete

  - by cfstras

  I have a Sony Vaio VPCCB-27FX with hybrid graphics. Using vgaswitcheroo enables me to switch my discrete card off to save power. Now when i want to switch to the discrete card for performance, my system freezes. I already tried logging out and killing x with service lightdm stop, but still, it freezes as soon as I echo DIS > switch. typing blindly, echo IGD > switch returns me to my console where it reads [ 179.555171] i915: switched off, but it seems the discrete card never gets switched on... running echo DDIS > switch gives me the following: [540....] [drm:atop_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CEE2 (len 62, WS 0, PS 0) @ 0xCEFE [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BBF6 (len 1036, WS 4, PS 0) @ 0xBCF3 [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BB8C (len 76, WS 0, PS 0) @ 0xBB94 [541....] [drm:r600_RING_TEST] *ERROR* radeon: ring test failed (scratch(0x8504)=0xFFFFFFFF) [541....] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume after that, the atombios part repeats a few times. also, the terminal locks up again and sysrq+REISUB is my only rescue. Has anybody an idea how I can switch to my discrete card without the system locking up? #uname -srvmpio Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux #lsb_release -r Description: Ubuntu 12.04 LTS

  Read the article

• How the computer could be used by two users at the same time

  - by user59595

  Running windows 7 64, Is there any application that allows me to connect an additional keeyboard and mice and monitor, so that this can be used by other user at the samee time while I use the main computer, There is an application called cpnmouse but it doesnt work on win7, betwin crashes before win7 start up, teamplayer is too expensive Has anyone figured out this functionality maybe with virtual machinees or something, i've tried team player in a virtual machine but it crashes I have 3 monitors one of theem is a Tv, i would like that my girlfried uses it as a terminal without me loosing the focus cause she uses the mice There is a linux software called userful, but it's linux and doesnt work for me, and windows multipoint server needs a clean installation and also that's not a valid choice

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

  - by user108754

  I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

  Read the article

• Lubuntu 12.04 on Acer laptop boots to blank blue screen

  - by WGCman

  My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• openvpn and virtualbox

  - by hyperboreean

  Hi guys, I have a linux machine on which I occasionally run Windows XP in Virtual Box. All runs wonderful, except for the openvpn in XP, which can't connect to the vpn server running on a remote machine. The vpn client works from linux ... as far as I read until now it seems to be a problem of port forwarding ... I keep getting this error: TCP/UDP: Incoming packet rejected from 10.0.2.2:1194, expected peer address: (allow this incoming source address/port by removing --remote or adding --float) , but have no idea how to fix it.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Screencasting with explanation boxes

  - by Bakhtiyor

  I wanted to make a video demonstration of one software. I wanted to use text description instead of using voice description, a simple example of what I've explained could be this short screencasting, where author uses short text messages instead of explaining it with his own voice. Could you recommend any free software for doing such a screencasting please? Would be better if it works in Ubuntu or if it is a web application. UPDATE I have found out Wink which could add explanations boxes as I said. Now the problem is that it doesn't support Linux 64bit, has only 32bit. Any other app like Wink for 64bit Linux?

  Read the article

• Why is Thunar not creating and showing thumbnails of images?

  - by darenw

  Thunar is my main file manager. Normally it automatically creates thumbnail images of all images in the directory being viewed. After experimenting with other Linux distros then installing Arch Linux once and for all, Thunar is not showing thumbs. Image files all get the same generic image icon. Googling turned up some information: Something called gvfs needs to be installed. I have it. Still no go. (Apparently this isn't actually needed anyway.) Someone had this problem and fixed it by running some mime-related command (I didn't save any notes) I did this same command but no go. Checking the obvious: in Thunar's Edit/Preferences, yes, the [x] Show thumbnails is turned on. When I view one image in GIMP or EOG, the generic icon in Thunar is replaced by a thumbnail. But only for that one file I opened.

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Recover files after unsuccesfull partitioning

  - by arsan

  I wanted to install another Linux on my comp, so i tried to resize one of my NTFS partitions with Norton Partition Magic, but it didn't complete successfully and it showed some errors and said that the partition is not resized and that it's the same size like before, but when i rebooted my comp i couldn't open that partition anymore and also i am not able to mount it from my linux. So this is my question: I had very important data on that partition - can i recover it back ? I guess nothing's deleted it's just something messed up so it's not usable, but can i get it back ? Please if there's any possible way of doing it, reply to me, thank you.

  Read the article

• b43 module loaded, but no interface showed up

  - by Eduardo Bezerra

  I'm using CentOS 6.3 x86_64 on a hardware with a BCM43224 chip for wi-fi. I installed the b43-fwcutter module and then run modprobe b43, with no error messages. However, no new network interface showed up, and the return of iwconfig is: lo no wireless extensions. eth0 no wireless extensions. lspci -nn | grep 43224 returns: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) and uname -a: Linux localhost.localdomain 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Any ideas of how to make the wireless device work?

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

• Is there an open source clone of a game in the Total War Series?

  - by sinekonata

  I loved Shogun:Total War gameplay and then later on spent weeks re-enacting historical wars and battles with Europa Barbarorum. It's a mod for Rome:TW that focuses on historical accuracy in the peoples, units, sounds, visuals, everything from macro mechanics to actual battles (e.g. a lot more missiles). Since that time I kind of turned my back on Windows cause it sucks and use Linux cause Mac sucks even worse. So as I miss that game (Eur. Barb.) and consider it the most realistic RTS to date, I'd like to know if there are any free and open source alternatives to it because ever since I'm under linux, I became addicted to FOSS so I also turned my back on paying (even kickstarters) for closed source, pay to play games. I have found a clone/alternative for everyone of the best games like Minecraft, CSS, Natural Selection, TA/SupCom etc... It's kind of the last one I need. The Spring engine is amazing for example, is there another open source project of the source in current development? Or would Spring itself be enough (it certainly looks capable) to make it? Thanks in advance guys...

  Read the article

• File doesn't exist when trying to change permissions following the avasys image scan manual

  - by Howard Graham

  I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

  Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >