Search Results

Search found 11822 results on 473 pages for 'external assembly'.

Page 63/473 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Linksys router with multiple external IP's

  - by Adrian Mester

  In an office I've got a network connection with 5 external IPs and a Linksys router (I'm not 100% percent sure of the model). I need 4 of those 5 IPs to be routed to a server, and the fifth to be shared between the other computers at the office. This can probably be done using a switch in front of the router. Connect the server and the router to the switch, and let the router handle the rest of the network. Is there a way to configure the router to route the 4 IPs to the server, and create an internal network the the other computers at the same time?

  Read the article

• RHEL kickstart with external DVDrom drive

  - by AndyM

  HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

  Read the article

• Technicolor TG582n with external DHCP server [on hold]

  - by Jack

  We have a small home setup with a Technicolor TG582n on Plusnet ISP. We have a Samba4 DC with DNS forwarding enabled. The DC forwards to the Technicolor. However, the client machines have their DNS settings manually set. This is an annoyance when using laptops on other networks. We would like to have DHCP handled on the server machine, such that when a client connects to the Technicolor, it gets its IP and DNS information from the DHCP server, eliminating the need to manually set adapter DNS settings. However, I cannot find an option to disable DHCP on the Technicolor and am not completely clear on how one would point DHCP services to the server from the Technicolor if there were the option. So, how would one make the Technicolor use an external server for DHCP leases?

  Read the article

• IIS Redirect a sub directory to an external URL

  - by Will Hancock

  Hi forgive my ignorance for I am a humble client side developer... I am a webapp made up of static HTML and JS. But I want to call an external service via AJAX, this causes some issues with CORS or Cross Domain policy on the browser. So I need to make a request to MY server http://dev.webapp.com/service So I want to redirect the /service on the server to http://externaldata.com/service And return the result. The Mac boys have acheived this in Apache with a proxy pass: ProxyPass /service http://externaldata.com/service Can anybody help with how to do this in IIS? I have found articles about ARRs and Reverse Proxy, terms that are alien and seem too complicated. As a humble webdev can I do this using IIS GUI?

  Read the article

• Importing from referenced assembly - MEF

  - by cmaduro

  I have the following simplified code: namespace Silverbits.Applications { public partial class SilverbitsApplication : Application { [Import("MainPage")] public UserControl MainPage { get { return RootVisual as UserControl; } set { RootVisual = value; } } public SilverbitsApplication() { this.Startup += this.SilverbitsApplication_StartUp; this.Exit += new EventHandler(SilverbitsApplication_Exit); this.UnhandledException += this.SilverbitsApplication_UnhandledException; InitializeComponent(); } private void SilverbitsApplication_StartUp(object sender, StartupEventArgs e) { CompositionInitializer.SatisfyImports(this); } } namespace Manpower4U { public class App : SilverbitsApplication { public App() : base() { } } } namespace Manpower4U { [Export("MainPage")] public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); } } } The idea is that I have a Silverbits Library which is a completely different solution. And I have Manpower4U silverlight application that references my Silverbits library. I want to export MainPage from Manpower4U and set it to the RootVisual in my SilverbitsApplication class. SilverbitsApplication class is basically App.xaml/App.cs from the silverlight application, only I put it in a class library and subclassed App.cs file in Manpower4U, which is now the entry point of Manpower4U. MEF cannot resolve the import. How do I get this to work?

  Read the article

• Video Hosting External or Internal?

  - by user69334

  I have a client who wants to offer videos for downloading or streaming on his website. Now we have hosting for him, which is wonderful: it's reliable and fast, offers unlimited space and databases BUT it only offers 10GB in bandwidth. The videos could easily be placed on his server (unlimited space) but the bandwidth is a real problem. Now I am wondering if he would purchase external hosting for his videos, and people would want to download them, woould this still eat up all his available bandwidth in no time, because the download request would go via his site, or is there a way to circumvent this?

  Read the article

• How to change the assemblyIdentity of an executable

  - by David

  I want to hide the tool I used to create an .exe file. I am not doing anything illegal, I just want to protect my intellectual property from being copied. If I open the exe file in a text editor I see the following section. <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="XXX.XX" processorArchitecture="X86" name="Microsoft.Windows.NameOfTheTool" type="win32" /> </assembly> I have attempted to change the name to: name="Microsoft.Windows.SomeOtherName" This resulted in the following message when I attempted to execute the file. "This application has failed to start because its side-by-side configuration is incorrect." How can I solve this?

  Read the article

• How to get an enum value from an assembly using late binding in C#

  - by tetranz

  Hello I have a C# 3.0 WinForms application which is occasionally required to control Excel with automation. This is working nicely with normal early binding but I've had some problems when people don't have Excel installed but still want to use my app except for the Excel part. Late binding seems to be a solution to this. Late binding is rather tedious in C# 3 but I'm not doing anything particularly difficult. I'm following http://support.microsoft.com/kb/302902 as a starter and it's working out well. My question is how can I use an enum by name? e.g, how can I use reflection to get the value of Microsoft.Office.Interop.Excel.XlFileFormat.xlTextWindows so that I can use it an InvokeMethod call? I know the easiest way is probably to create my own local enum with the same "magic" integer value but it would be nicer to be able to access it by name. The docs often don't list the value so to get it I probably need to have a little early bound test app that can tell me the value. Thanks

  Read the article

• Sending mail from a java app without using an external SMTP server

  - by Andrew

  JavaMail requires that you specify an external SMTP server when sending mail. I want to have my java app send email directly without having to use an external SMTP server such as postfix or sendmail. Can anyone recommend a library which provides this kind of functionality? Ive done some googling and have come up with nothing.

  Read the article

• Eclipse: open file in external editor only temporarily

  - by user54690

  Using Eclipse, I can open a Java source file with an external editor by right-clicking on the file name (in the Package Explorer) and selecting Open With ... - emacsclient. I'm very glad to be able to do that. However, I only want to do that sometimes, not every time. Now, when I double-click on that same file name, I always automatically get the file opened in emacsclient. This is particularly annoying when I use the Open Type dialog to find a file, because in that case it's not possible to right-click and choose the default Eclipse editor. Is there a way to make Eclipse forget that I previously opened a particular file with emacsclient, so that it can go back to the default behavior of using the regular Eclipse editor?

  Read the article

• Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

  - by ron

  I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

  Read the article

• HP Probook 6550b has issues with an external monitor

  - by chama

  I recently got a new HP Probook 6550b laptop for work. However, very often, when left alone (not put to sleep), the built in display will go dark. Not only that, but whenever I plug in an external monitor, the display will blank out as well. Sometimes after this happens, putting the laptop to sleep and then waking it up solves the problem. But only sometimes and only for a short time. The next time I plug in my monitor, it happens again. I know this isn't only my problem - 6 other people got the same laptop as I have at the same time, and we're all having such issues. Any suggestions as to the root of this problem and a way to fix it? It's driving me crazy!

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Memory section handling error

  - by Basilevs

  I'm getting a link time error: WARNING: /home/gulevich/development/camac-fedorov/camac/linux/k0607-lsi6/camac-k0607-lsi6.o (.ctors): unexpected non-allocatable section. Did you forget to use "ax"/"aw" in a .S file? Note that for example <linux/init.h> contains section definitions for use in .S files. The code causing the error (assembly in C source): # if defined(__ELF__) # define __SECTION_FLAGS ", \"aw\" , @progbits" /* writable flag needed for ld ".[cd]tors" sections bug workaround) */ # elif defined(__COFF__) # define __SECTION_FLAGS ", \"dr\"" /* untested, may be writable flag needed */ # endif asm ( ".section .ctors" __SECTION_FLAGS "\n" ".globl __ctors_begin__\n" "__ctors_begin__:\n" ".previous\n" ); Is there any way to fix this? The idea is to put a varaible __ctors_begin__ at the beginning of a certain memory section. This code is a legacy that worked fine using a different build system and older compiler. Meaning of this assembly code explained in an answer to my previous question.

  Read the article

• Difference between x86 and 64bit assembly in .NET

  - by Mita

  Could some tell me the difference between 32bit and 64bit .NET assemblies? I understand when it is needed to be precise instead of selecting AnyCPU configuration. Regards, Mita

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• External stereo receiver and speakers on desktop PC work during test but no other time

  - by Debbie

  I have a desktop PC running Windows 7. I have connected an external stereo receiver and speakers to it and everything works fine when I test it in the Realtek Audio Sound through the control panel. However, when I play a video or an audio CD, the stereo speakers do not work. I have line in, line out, and speakers connected to the receiver. I have been through the configure speakers portion also. Is there someplace else I need to configure?

  Read the article

• AFP AD ACL permissions issues with external drive

  - by AlanGBaker

  Mac OS X Server 10.4.11 connected to an AD domain system serving AFP shares to Mac OS X 10.5.8. If I create a share on the the internal RAID of the server with an ACL that allows RW to all ("Domain Users"), then it works, but a share created identically on the external RAID appliance (Drobo v2) doesn't. When the share from the Drobo is mounted, it shows no sign that it has any ACLs associated with it: neither in the Finder (Get Info), nor when checked via the terminal with "ls -lae". The Drobo does show that the ACLs exist when I ssh into the server and check it there, but when the clients mount that share, they just... ...disappear. Any thoughts?

  Read the article

• Different graphic cards drivers while booting from external media

  - by goran

  I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

  Read the article

• Populate data and submit on external page

  - by joey m

  Hi, Is is possible to populate data on an external website (example mail.yahoo.com) and subsequently submit the page by using javascript executed from my own webpage? Or is there another way to do this. I am trying to figure out how to do an autologin function into external website. Thanks.

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >