Search Results

Search found 20242 results on 810 pages for 'faith in unseen things'.

Page 63/810 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• PASS Summit 2011 &ndash; Part I

  - by Tara Kizer

  What an amazing week I had at PASS Summit 2011 in Seattle, WA!  I hadn’t attended a PASS conference since September of 2005 when it was in Grapevine, Texas.  It has grown so much since then.  I am not sure how many people attended back then, but I’d guesstimate about 1500.  They announced that at this year’s conference there were 4000 attendees.  WOW! Here are my favorite aspects of this conference: Networking! – Not only did I meet a lot of new people, but I also got to meet people in person that I’ve known on the Internet for years like Mladen Prajdic (blog|twitter) and Rob Volk (blog|twitter).  I even met someone that I’d recently helped out in the SQLTeam forums.  Learning – I took a lot of notes during the sessions I attended and plan on blogging very soon about them.  It is amazing the amount of things you learn and the things that you unlearn.  Yes I said unlearn.  Some of the stuff that I thought I knew was either out-dated or just plain wrong.  Fun, fun, fun – To say that this conference was fun would be an understatement.  I had a blast!  I attended the “Welcome Reception and Quizbowl” on Tuesday night, the “Exhibitor Reception” on Wednesday night, and the “Community Appreciation Party” at GameWorks on Thursday night.  There were many other after-hours events to attend, but I had to make my kids a priority at night so I had to get back to my hotel room before 9pm so that I could Skype with them.   It was very entertaining reading and posting with #sqlpass on Twitter.  Twitter has changed the conference experience for the better.  I will definitely be able to do my job better due to attending this conference.  The return on investment is HUGE!

  Read the article

• Rule of thumb for cost vs. savings for code re-use

  - by Styler

  Is it a good rule of thumb to always write code for the intent of re-using it somewhere down the road? Or, depending on the size of the component you are writing, is it better practice to design it for re-use when it makes sense with regards to time spent on it. What is a good rule of thumb for spending extra time on analysis and design on project components that have "some probability" of being needed later down the road for other things that may or may need this part. For example, if I have the need for project X to do things A, and B. A definitely needs to be written for re-use because it just makes sense to do so. B is very project specific at the moment, and I can hack it all together in a couple days to finish the project on time and give everyone kudos for being a great team, etc. Or if we say, lets spend a whole friggin' 2 weeks figuring out what project Y/Z might need this thing for and spend a load of extra time on on part B because someday we might need to use it on project Y/Z (where the savings will be realized). I'd imagine a perfect world situation would be a nicely crafted combination of project specific vs. re-use architected components given the project. However some code shops might feel it would be a great idea to write everything for the intention of using it at some point down the road.

  Read the article

• What do I need to know to design a language and write a interpreter for it?

  - by alFReD NSH

  I know this question has been asked and even there are thousands of books and articles about it. But the problem is that there are too many, and I don't know are they good enough, I have to design a language and write a interpreter for it. The base language is javascript (using nodejs) but it's ok if the compiler was written in another language that I can use from node. I had done a research about compiler compilers in JS, there is jison (Bison implementaion in JS), waxeye, peg.js. I decided to give jison a try, due to the popularity and its being used by coffee script, so it should be able to cover my language too. The grammar definition syntax is similar to bison. But when I tried read the bison manual it seemed very hard to understand for me. And I think it's because I don't know a lot of things about what I'm doing. Like I don't what is formal language theory. I am experienced in Javascript (I'm more talented in JS than most average programmers). And also know basic C and C++ (not much experience but can write a working code for basic things). I haven't had any formal education, so I may not be familiar with some software engineering and computer science principles. Though everyday I try to grasp a lot of articles and improve. So I'm asking if you know any good book or article that can help me. Please also write why the resource you're suggesting is good. --update-- The language I'm trying to create, is not really complicated. All it has is expressions (with or without units), comparisons and logical operators. There are no functions, loops, ... The goal is to create a language that non-programmers can easily learn. And to write customized validations and calculations.

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• so, my Cassandra consultant left me and now I'm thinking about reverting to mysql

  - by sathia

  I run a middle size community and some time ago I started to develop social capabilities such as follow, status update, wall etc. For some reason i thought that Cassandra was the right tool for the job so I looked online for a Cassandra developer and I found a very talented one. Unluckily in the midst of the development the dev left (too much jobs) and so I'm here with a very nice class, a very nice demo, but a lot of fears that I won't be able to handle basic things such as compaction, scaling etc. My biggest fear is to go online with all this coolness and then having a site inaccessible for hours or days. The mysql consultant (very talented too) keeps saying me that I should stick with Mysql which I know rather well and in case something's wrong we can manage. In that case I should take the class made for cassandra and abstract it for Mysql. My question is this: Should I find another dev/consultant and stick with Cassandra because for social things it is definitely the best tool for the job, or should I listen to the Mysql consultant and revert to Mysql? About 15k login each day Average 20 actions per user Avg 6 followers x user (These are current statistics, but of course I'd like to increase them as much as possible.)

  Read the article

• Updating an ADF Web Service Data Control When Service Structure or Location Change

  - by Shay Shmeltzer

  The web service data control in Oracle ADF gives you a simplified approach to consuming services in ADF applications, and now with ADF Mobile the usage of this service seems to be growing. A frequent question we get is what happens if the service that I'm consuming changes - how do I update my data control? Well, first we should mention that if you do a good design of your application before you actually code - then things like Web service method signature shouldn't change. The signature is the contract between the publisher and the consumer, and contracts shouldn't be broken. But in reality things do change during development stages, so here is how you can update both method signatures and service location with the Web service data control: After watching this video you might be tempted to not copy the WSDLs to your project - which lets you use the right click update on a data control. However there is a reason why the copy is on by default, it reduces network traffic when you are actually running your application since ADF doesn't need to go to the server to find out the service structure. So for runtime performance, you probably should keep the WSDL local.  I encourage you to further look into both the connections.xml file where your service location is saved, and the datacontrols.dcx file where its definition is kept to get an even deeper understanding of how ADF works underneath the declarative layers.

  Read the article

• I don't know how to connect to the internet

  - by Michiel

  I'm having some trouble finding an answer to my problem. I have a dell desktop (studio hybrid) and i have windows vista on it. The internet on windows vista works great, no problem. But now i downloaded Ubuntu 11.10 and I'm having problems. I can't find how to connect to my wireless network, when i click the network icon, it shows a list of things but I can only click 'enable wireless network' or something like that and 'edit connections'. But in this list it also says ( in a grey collor and i can't click it ) : 'No wireless connection, device not ready (firmware missing)" Or something like that. Now i tried several things i read on the internet (using my vista OS cause i can't use ubuntu for the internet, which is really enoying). But none of them helped me. I would like someone to tell me what my problem is or what information I have to give you to get an answer. So tell me if i have to edit a connection, or tell me how i have to get the wireless connection to work and to repair the 'firmware missing problem'. I hope someone can/is willing to help me. Bye

  Read the article

• Non-Obvious Topics to Learn for Game Development

  - by ashes999

  I've been writing games for around 10 years now (from QBasic to C# and everything in-between). I need to start stretching my skills into different areas. What are other, surprising topics I should read up on? Expected topics would include the usual suspects: Programming language of your choice Scripting language Source control Project management (or Agile) Graphics API Maybe some AI (A* path-finding?) Physics (projectile physics) Unit testing (automated testing) I'm looking for more esoteric topics; things that you don't expect to need to know, but if you do know them, they make a difference. This could include things like: Art skills (drawing, lighting, colouring, layout, etc.) Natural language processing The physics of sound (sound-waves, doppler effect, etc.) Personally, I feel that having technical art skills (eg. can make decent art-work if you can only come up with ideas; or, following Photoshop/GIMP tutorials) was the most beneficial for me. This is not intended to be an open-ended question; I'm looking for specific skills that helped you and you expect will continue to benefit you in the short- and long-term.

  Read the article

• Confused about javascript module pattern implementation

  - by Damon

  I have a class written on a project I'm working on that I've been told is using the module pattern, but it's doing things a little differently than the examples I've seen. It basically takes this form: (function ($, document, window, undefined) { var module = { foo : bar, aMethod : function (arg) { className.bMethod(arg); }, bMethod : function (arg) { console.log('spoons'); } }; window.ajaxTable = ajaxTable; })(jQuery, document, window); I get what's going on here. But I'm not sure how this relates to most of the definitions I've seen of the module (or revealing?) module pattern. like this one from briancray var module = (function () { // private variables and functions var foo = 'bar'; // constructor var module = function () { }; // prototype module.prototype = { constructor: module, something: function () { } }; // return module return module; })(); var my_module = new module(); Is the first example basically like the second except everything is in the constructor? I'm just wrapping my head around patterns and the little things at the beginnings and endings always make me not sure what I should be doing.

  Read the article

• Good practice or service for monitoring unhandled application errors for a small organization

  - by palto

  I'm working with multiple software with varying ways of monitoring for errors. When I make software, I usually send email with the stack trace to admins(usually me). Some customer software is monitored by a team who check that a particular batch run was successfull. Other software might not have any monitoring at all(someone will call when things go wrong horribly). Sending emails is good, except when things start going wrong, my mail gets filled fast. Also I don't want to solve the same problem in code for every software. Is there some relatively cheap and low maintenance software or practice to handle this. I want it to be cheap/low maintenance because usually I work alone or in teams of 5 or smaller. For example it would be great if errors would be aggregated so I don't get 10 000 emails when something unexpected happens... For clarification: By unhandled errors I mean Exceptions that were unhandled by application code that were propagated to Tomcat or Jboss. I don't need help with how to catch those errors. I need help with what to do with them. Is there any cloud application that I could send my errors to? Or some simple server to install? Or some library that can handle errors using configuration files. I use Java if that is any help.

  Read the article

• Microsoft Dev Days &ndash; Johannesburg 2010

  - by MarkPearl

  So I am half way through dev days in Johannesburg. It has been quite an interesting day… Maybe it is me, but this year it hasn’t been as OMG as at previous conferences. A few things that stood out though… 1) This is the first time I have had to queue in a line to use the gents toilets before – yes, a true sign that we are at a typically male dominated industry event in this country – the men’s toilets were jam packed – the ladies if there were any there didn’t have a problem. 2) Bart De Smet presentation still rocks – I am a fan of Bart’s and once again his presentation was great. Something that I am going to look into in more depth which I think is a new feature in .Net is called Code Contracts. 3) I have got to get into Silverlight more… I have known this for a long time and have dabbled in it for a while, but Silverlight in my opinion will become the main platform for “hosting” applications. So… 3 things so far, hopefully I get some OMG’s from the rest of the day…

  Read the article

• Software Design Idea for multi tier architecture

  - by Preyash

  I am currently investigating multi tier architecture design for a web based application in MVC3. I already have an architecture but not sure if its the best I can do in terms of extendability and performance. The current architecure has following components DataTier (Contains EF POCO objects) DomainModel (Contains Domain related objects) Global (Among other common things it contains Repository objects for CRUD to DB) Business Layer (Business Logic and Interaction between Data and Client and CRUD using repository) Web(Client) (which talks to DomainModel and Business but also have its own ViewModels for Create and Edit Views for e.g.) Note: I am using ValueInjector for convering one type of entity to another. (which is proving an overhead in this desing. I really dont like over doing this.) My question is am I having too many tiers in the above architecure? Do I really need domain model? (I think I do when I exposes my Business Logic via WCF to external clients). What is happening is that for a simple database insert it (1) create ViewModel (2) Convert ViewModel to DomainModel for Business to understand (3) Business Convert it to DataModel for Repository and then data comes back in the same order. Few things to consider, I am not looking for a perfect architecure solution as it does not exits. I am looking for something that is scalable. It should resuable (for e.g. using design patterns ,interfaces, inheritance etc.) Each Layers should be easily testable. Any suggestions or comments is much appriciated. Thanks,

  Read the article

• High Power Consumption and Wakeups on my Asus X54H with 12.04

  - by Marogian

  So I've been using powertop to try and reduce the power consumption on my laptop as I only seem to get about 3 hours of battery. From reading other threads on here it seems my power consumption and wakeups are strangely high, here's a summary: The battery reports a discharge rate of 10.2 W Summary: 651.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec The things which stand out as odd: 1.31 W 4.0 ms/s 166.7 Interrupt PS/2 Touchpad / Keyboard / Mouse So more than 10% of my battery is being consumed by my touchpad/keyboard? That doesn't seem right. 548 mW 34.3 ms/s 45.9 Process compiz 5% from Compiz. Is this correct? 376 mW 1.8 ms/s 47.5 Interrupt [51] i915 298 mW 1.4 ms/s 37.7 Timer tick_sched_timer Another few percent from these things- not quite sure what they are. For reference I've installed Laptop Mode Tools, Jupiter (on power save), the CPU governor is definitely on powersave and brightness is on minimum. What else can I do/Any ideas? I've seen other posts on here reporting laptop battery lives of ~8 hours and power consumption of 4W rather than my 10W... Thanks!

  Read the article

• Why does video playback lag/freeze when I go into full-screen mode?

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• Which AMI should I use as a base for a Django application?

  - by Edan Maor

  I'm starting development of a Django application, on Amazon's Web Services. I'm looking to build an instance that will serve the Django. I don't have much experience with such things, having only used a shared host before (WebFaction). So I'm wondering, which AMI should I use as a base? I'm assuming I want an Ubuntu AMI, possibly with certain things like Apache pre-installed? One minor point: I'm planning to serve several different Django projects from the same instance. I use virtualenv on my dev machine right now to separate the different projects, I'm assuming I'll do the same on EC2. Thanks!

  Read the article

• Two new profile in new visual studio 2010.

  - by Jalpesh P. Vadgama

  Visual studio 2010 is a great tool and i have become fan of visual studio 2010. I have found two new code profile in visual studio 2010. Web Development Profile Web Development Code Optimized Profile. Web Development profile will hide the top bar which contains the client object and and event dropdowns. So it will have more spaces. Another one web development code optimized which will hide all the things except main windows. It will hide Toolbox,CSS properties and all other things so you will have more spaces to play with your html. So as a web developer you can use this two great new profile as per your convenience when you only want to play with your html then use webdevelopement code  optimized profile and another interesting thing is that you don’t have to reset your settings you can also just do with Tools->Settings menu like below. This will swap different profile like below. Hope this will help you.. Technorati Tags: Visual Studio 2010,ASP.NET 4.0

  Read the article

• What tools can be used to monitor a web application? Beyond "doesn't 404"

  - by Freiheit

  I have an internal web application that has recently gone through a major version upgrade. I would like to monitor this application over the weekend and look for 'soft' errors. I will still need to spot check things by hand, but there are some common failure patterns that I think I can automate. Examples include data with bad formatting, blank rows in tables (indicates missing non-critical data), patterns for identifiers ("TEST" means one of my devs left a testing feed on), etc. I think there are applications out there that can be scripted to do things like: 1. log in 2. Go to $URL 3. select 3rd link in $LIST or $PATTERN 4. Check HTML from that link for $PATTERNS 5. Email report Are these goals sane? What applications/tools can help with this?

  Read the article

• Can you make torrents start downloading only AFTER the previous torrent has finished downloading in uTorrent?

  - by Sammy

  If I have multiple downloads I can have them all download simultaneously or pause one and let the other download and then when the 1st is done I manually pause it and have the second download, afterward I let both seed for a while. But How can I set it so that the 2nd torrent will start downloading only after the 1st has finished. And is it possible to have the 1st pause seeding after it has finished downloading. I have nothing against seeding but I want to wait till all my downloads are done before sole seeding. If these things aren't possible in uTorrent is there another client that handles these things?

  Read the article

• (Abstract) Game engine design

  - by lukeluke

  I am writing a simple 2D game (for mobile platforms) for the first time. From an abstract point of view, i have the main player controlled by the human, the enemies, elments that will interact with the main player, other living elements that will be controlled by a simple AI (both enemies and non-enemies). The human player will be totally controlled by the player, the other actors will be controlled by AI. So i have a class CActor and a class CActorLogic to start with. I would define a CActor subclass CHero (the main player controlled with some input device). This class will probably implement some type of listener, in order to capture input events. The other players controlled by the AI will be probably a specific subclass of CActor (a subclass per-type, obviously). This seems to be reasonable. The CActor class should have a reference to a method of CActorLogic, that we will call something like CActorLogic::Advance() or similar. Actors should have a visual representation. I would introduce a CActorRepresentation class, with a method like Render() that will draw the actor (that is, the right frame of the right animation). Where to change the animation? Well, the actor logic method Advance() should take care of checking collisions and other things. I would like to discuss the design of a game engine (actors, entities, objects, messages, input handling, visualization of object states (that is, rendering, sound output and so on)) but not from a low level point of view, but from an high level point of view, like i have described above. My question is: is there any book/on line resource that will help me organize things (using an object oriented approach)? Thanks

  Read the article

• I know how to program, and how to learn how to program, but how/where do you learn how to make systems properly?

  - by Ryan

  There are many things that need to be considered when making a system, let's take for example a web based system where users log in and interact with each other, creating and editing content. Now I have to think about security, validation (I don't even think I am 100% sure what that entails), "making sure users don't step on each others feet" (term for this?), preventing errors in many cases, making sure database data doesn't become problematic through unexpected... situations? All these things I don't know how or where to learn, is there a book on this kind of stuff? Like I said there seems to be a huge difference between writing code and actually writing the right code, know what I mean? I feel like my current programming work lacks much of what I have described and I can see the problems it causes later, and then the problems are much harder to solve because data exists and people are using it. So can anyone point me to books or resources or the proper subset of programming(?) for this type of learning? PS: feel free to correct my tags, I don't know what I am talking about. Edit: I assume some of the examples I wrote apply to other types of systems too, I just don't know any other good examples because I've been mostly involved in web work.

  Read the article

• SharePoint 2010 in the cloud a.k.a. SharePoint Online

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). There are 3 ways to run SharePoint On premises, you buy the servers, and you run the servers. Hosted servers, where you don’t run the servers, but you let a hosting company run dedicated servers. Multi-tenant, like SharePoint online – this is what I am talking about in this blog post. Also known as SaaS (Software as a Service). The advantages of a cloud solution are undeniable. Availability, (SharePoint line offers a 99.9% uptime SLA) Reliability. Cost. Due to economies of scale, and no need to hire specialized dedicated staff. Scalability. Security. Flexibility – grow or shrink as you need to. If you are seriously considering SharePoint 2010 in the cloud, there are some things you need to know about SharePoint online. What will work - OOTB Customization, collaboration features etc. will work SharePoint Designer 2010 is supported, so no code workflows will work Visual Studio sandbox solutions, client object model will work. What won’t work - SharePoint 2010 online cloud environment supports only sandbox solutions. BCS, business connectivity services is not supported in SharePoint online. What you can do however is to host your services in Azure, and call them using Silverlight. Custom timer jobs will not work. Long story short, get used to Sandbox solutions – and the new way of programming. Sandbox solutions are pretty damn good. Most of the complaints I have heard around sandbox solutions being too restrictive, are uninformed mechanisms of doing things mired in the ways of 2002. .. or you could just live in 2002 too. Comment on the article ....

  Read the article

• What's your most controversial programming opinion?

  - by Jon Skeet

  This is definitely subjective, but I'd like to try to avoid it becoming argumentative. I think it could be an interesting question if people treat it appropriately. The idea for this question came from the comment thread from my answer to the "What are five things you hate about your favorite language?" question. I contended that classes in C# should be sealed by default - I won't put my reasoning in the question, but I might write a fuller explanation as an answer to this question. I was surprised at the heat of the discussion in the comments (25 comments currently). So, what contentious opinions do you hold? I'd rather avoid the kind of thing which ends up being pretty religious with relatively little basis (e.g. brace placing) but examples might include things like "unit testing isn't actually terribly helpful" or "public fields are okay really". The important thing (to me, anyway) is that you've got reasons behind your opinions. Please present your opinion and reasoning - I would encourage people to vote for opinions which are well-argued and interesting, whether or not you happen to agree with them.

  Read the article

• OS X server large scale storage and backup

  - by user135217

  I really hope this question doesn't come across as trolling or asking for buying advice. It's not intended. I've just started working for a small ad agency (40 employees). I actually quit being a system administrator a few years ago (too stressful!), but the company we're currently outsourcing our IT stuff to is doing such a bad job that I've felt compelled to get involved and do what I can to improve things. At the moment, all the company's data is stored on an 8TB external firewire drive attached to a Mac Mini running OS X Server 10.6, which provides filesharing (using AFP) for the whole company. There is a single backup drive, which is actually a caddy containing two 3TB hard drives arranged in RAID 0 (arrggghhhh!), which someone brings in as and when and copies over all the data using Carbon Copy Cloner. That's the entirety of the infrastructure, and the whole backup and restore strategy. I've been having sleepless nights. I've just started augmenting the backup process with FreeBSD, ZFS, sparse bundles and snapshot sends to get everything offsite. I think this is a workable behind the scenes solution, but for people's day to day use I'm struggling. Given the quantity and importance of the data, I think we should really be looking towards enterprise level storage solutions, high availability and so on, but the whole company is all Mac all the time, and I cannot find equipment that will do what we need. No more Xserve; no rack storage; no large scale storage at all apart from that Pegasus R6 that doesn't seem all that great; the Mac Pro has fibre channel, but it's not a real server and it's ludicrously expensive; Xsan looks like it's on the way out; things like heartbeatd and failoverd have apparently been removed from Lion Server; the new Mac Mini only has thunderbolt which severely limits our choices; the list goes on and on. I'm really, really not trying to troll here. I love Macs, but I just genuinely don't know where I'm supposed to look for server stuff. I have considered Linux or FreeBSD and netatalk for serving files with all the server-y goodness those OSes bring, but some the things I've read make me wonder if it's really the way to go. Also, in my own (admittedly quite cursory) experiments with it, I've struggled to get decent transfer speeds. I guess there's also the possibility of switching everyone off AFP and making them use SMB or NFS, but I understand that this can cause big problems with resource forks and file locks. I figure there must be plenty of all Mac companies out there. If you're the sysadmin at one, what do you use? Any suggestions very gratefully received.

  Read the article

• Overwhelmed by complex C#/ASP.NET project in Visual Studio 2008

  - by Darren Cook

  I have been hired as a junior programmer to work on projects that extend existing functionality in a very large, complex solution. The code base consists of C#, ASP.NET, jQuery, javascript, html and xml. I have some knowledge of all these in addition to fair knowledge of object-oriented programming and its fundamental concepts of inheritance, abstraction, polymorphism and encapsulation. I can follow code up through its base classes, interfaces, abstract classes and understand a large part of the code that I read while doing this. However, this solution is so humongous and so many things get tied together whenever I navigate through the code that I feel absolutely overwhelmed. I often find myself unable to fully follow everything that is going on with objects being serialized, large amounts of C# and javascript operating on the same pages and methods being called from template files that consist mainly of markup. I love learning about code, but trying to deal with this really stresses me out. Additionally, I do know that a significant amount of unit testing has been done but I know nothing about unit testing or how to utilize it. Any advice anyone could offer me regarding dealing with a large code base while using Visual Studio 2008 would be greatly appreciated. Are there tools that I can use to help get a handle on what is going on? Perhaps there are things even in Visual Studio that I am not aware of. How can I follow the code to low level functionality in order to get a better grasp of what is going on at a high level?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >