Search Results

Search found 40644 results on 1626 pages for 'ms access 2003'.

Page 63/1626 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• Convert Public Folders to a PST

  - by TrueDuality

  Alrighty so I've got a tricky one. I currently have a public folder database (edb & stm) residing on an Exchange 2003 folder. I need to export them into a pst file or otherwise make it so that I can manually get the data in it to end-users. I can not use the export feature built into Outlook as some of the folder refer to another server which doen't have the data. Trying only results in the Outlook Client hanging for close to an hour before giving an error about not finding the data. So this will need to be a server side export. There are a few tools out there that seem to be available for converting edb & stm files to psts but they are quite expensive. Does anybody have any ideas?

  Read the article

• Undeliverable messages to newly migrated Exchange user

  - by johnnyb10

  We are in the process of migrating from our old domain to a new one, part of which involves migrating mailboxes from Exchange 2003 to Exchange 2007. A bunch of users have been migrated already without problems. However, one of the users is having trouble receiving emails from others. When someone sends to him, they get an Undeliverable NDR that says "A configuration error in the e-mail system caused the message to bounce between two servers or to be forwarded between two recipients." The message shows the user's distinguished name as /OU=OurDomain/CN=Recipients/CN=USER57137172. The user's account name should just be "USER", so I don't know where the extra numbers ("57137172") are coming from. Thanks in advance.

  Read the article

• Two VPN (internet) connections rounting (win2003)

  - by tmp3128

  Here is my setup: - win2003 server (ISA installed) with 3 NICs:   1) internal network   2) ISP 1 (default) network (DHCP enabled)   3) ISP 2 (backup) network (DHCP enabled) - several "normal" PC within internal net - one "special" PC within internal net Both ISP 1 and ISP 2 provide access to internet and their resources thru their VPN connections. The goal is to enable all "normal" PCs to use internet from ISP_1's VPN connection and "special" should use only ISP_2's VPN connection. Futhermore all "normal" and "special" PCs should have access to several servers accesible only thru ISP_2's VPN connection. I have some thoughts how to achieve this but I want to be certain because everything should be configured as quickly as posible, avoiding significant downtime. windows-server-2003 isa routing vpn

  Read the article

• Permissions needed to read event log messages remotely?

  - by Neolisk

  When running under a limited account, local event log messages are displaying fine, for remote computer I am getting this error: The description for Event ID ( xxxxx ) in Source ( yyyyy ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: zzzzz. Same remote computer works fine under domain administrator. I am currently experimenting with just the Event Viewer, by using Run As. Original issue is a PowerShell script which does Get-EventLog. Are there any special permissions that need to be in place to able to read event log messages remotely? Supposedly there is a simple solution in Windows 2008 and higher, i.e. just add user to Event Log Readers group. Is there anything like that for Windows 2003?

  Read the article

• What is causing a vm to exhibit packet loss?

  - by Joe Philllips

  We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

  Read the article

• How do I get detailed information about what happens during logon

  - by Funky Si

  Due to my IT department leaving I am now responsible for all our IT systems. I now have several problems to get my head around and fix. I run Active Directory on windows server 2003 and use group policy to apply settings etc. Recently we have had some windows 7 clients added to our network, these are having awful problems with our logon scripts and drive mappings. For the most part my XP clients are working without a problem. What I want to know is what is going on during logon, as running the logon scripts after I have logged on often works. Does anyone know of a way to get detailed log information of what is happening before and during logon. Thanks for your help and any suggestions you have for tracking down the source of these problems.

  Read the article

• Need disc image help pronto!

  - by data

  I recently got a job as a junior network administrator. Last week the senior admins did their yearly reinstall of server 2003, exchange, drivers etc on the main server. I've been asked to back up the disc so that next year they can just copy over the pre-made image. What tools can i use to achieve both the creation of the entire servers HDD image and loading it back on (id like to test it in the sandbox.) To impress them, a program that is free is preferable. And maybe a tool that can do it all from booting the program off of a USB drive.

  Read the article

• Missing management console for Symantec Antivirus, Corporate Edition

  - by Alex C.

  I work for a small (80 employees) non-profit organization. We have a Windows network with a domain. The file server is running Server 2003. A vendor recently installed Symantec Antivirus, Corporate Edition, ver. 10.1.8.8000. It used to be the case that when I logged in to the file server as administrator, I would see an icon on the desktop that took me to the management console for the antivirus software. I could check logs, statuses of client machines, set policies, etc. That icon is now missing, and I can't find anything relevant under the "Start" menu. There is an entry for Symantec Antivirus, but that only gives me the panel for the client process, not the overall management console for the whole network. I don't want to call the vendor back to fix this (I'm baffled how we lost the icon in the first place). Can someone offer some guidance?

  Read the article

• Locking down remote desktop using AD GPO

  - by Brettski

  I am currently locking down a companies remote desktop access via a VPN. What I need to do is disable remote printing, file transfer and clipboard via active directory for the workstations that will be accessed. I am having trouble figuring out which GPO's are used to restrict this. My basic approach is to restrict VPN users to port 3389 so the will be able to access their work computers remotely but nothing else (I will look into layer 7 scanning later). With this I want to ensure they are unable to transfer and data via files, printing or the clipboard. The environment is Windows Server 2003

  Read the article

• Cross-Forest Trust

  - by cdalley

  I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

  Read the article

• Reporting available RDP sessions

  - by Sergei

  Hi All Default Windows 2003 Server has two RDP sessions available.If all of them are taken by someone else you will only be notified about it after providing your credentials. This seems like a waste of time especially in our environment where we share a lot of development server. Could a message be given as soon as you open the connection window if the connections are taken up? We can use qwinsta based script to check sessions before logon but it's still takes time. Is there a feature to do what I am asking for?

  Read the article

• Cannot start Xampp on server with IIS

  - by Vafello

  I am running a Windows Server 2003 with IIS and I am trying to install XAMPP in order to be able to run php and mysql based pages. I tried to install php on IIS, but it is too complicated and time consuming for me. I am able to run asp on localhost/ and I would like to run php websites on different port, say localhost:81/. After installing xampp and changing the port in httpd.conf file to 81 I try to turn on apache, but it turns off after about 5 seconds. Mysql works fine. It seems that there is a port clash, but I do not know how to change the ports and turn the apache permanently. Any advice appreciated. (I know it is more a server fault question, however I posted it there as well and did not get any reply, so I decided to try here)

  Read the article

• No Question mark suddenly É instead. Why?

  - by Xavierjazz

  Windows xp3. This happens occasionally. Today it happened in a calendar item in outlook 2003. As you can see from the title here, the question mark is working here (firefox). I am typing and suddenly the question mark is replaced by this character, É and I have no idea why. Can anyone answer this? I hope this is an appropriate site for this question. Thanks a lot.

  Read the article

• Windows Login Failure

  - by Chris Bateson

  I'm getting an error in the Event Viewer, which is also generating a lot of Logon Failure messages on our syslog server. Pretty much stuck on how to resolve. EventID: 536 Logon Type: 3 Reason: The NetLogon component is not active This is for a Windows Server 2003 system. I have checked here We're using Shavlik Protect 9 to scan and deploy patches. Shavlik stores the credentials for the systems and uses those stored credentials to deploy patches. This system is able to scan and deploy to other systems on the network using those credentials and no errors are generated. When installing to the local system that Shavlik is physically on then this error is generated. Whats interesting is that it doesn't generate during a scan, and the patches install fine. We've contacted Shavlik to get the response that they are unable to help since it's a Microsoft error. Has anyone seen this?

  Read the article

• IISRESET On IIS 6.0 failing

  - by Natasha Thapa

  I am trying to do a reset on IIS 6.0 from the command line and I get this message below, all the services are up and running, googled for a solution, tells me to reinstall IIS 6.0, which I tried so many times. Any idea what is the problem? Using windows server 2003. Attempting stop... Internet services successfully stopped Attempting start... Restart attempt failed. IIS Admin Service or a service dependent on IIS Admin is not active. It most likely failed to start, which may mean that it's disabled.

  Read the article

• Terminal Server/Win2K3: Users can't write to their My Documents or Temp folders

  - by Tim Sullivan

  I have a situation where a bunch of users are running our software on a Terminal Services machine on Windows 2003 Server. I've removed most permissions from the User group, but made sure they all have the appropriate permissions for their own application folders, as well as for their Documents and Settings folder. For some reason, even though everything seems to be set up properly, users can't create or delete files from their My Documents, Temp or other D&S folders. Whatever could be going on? I thought this was going to be straightforward, but clearly it's not! :-) Thanks for any help!

  Read the article

• Error when adding to the domain : the specified server cannot perform the requested operation

  - by James

  When we add computers to the domain in Windows 7, we get the error: Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "domain.com". The error was: The specified server cannot perform the requested operation. This happens on multiple computers and retrying yields the same result. Despite the error, the computer is still able to login to the domain ok. The DCs are windows 2003. Has anyone found a way to get rid of this error? Any help is appreciated.

  Read the article

• Windows diagnostic tools

  - by Tathagata

  I just joined a small computer lab which basically uses all Windows boxes and a few Windows Sever 2003. Coming from a *nix background I am missing all the nice tools that we have for diagnosis and troubleshooting. My question is what are the safe, free (not terribly concerned if it is like beer or freedom -both acceptable) tools out there that Windows system admins use for their day to day troubleshooting (network, applications, servers etc). I am aware of the tools that come with Windows (and their limited capabilites) - so my query is with what do you fill in your arsenal? (may be a list of win versions of tools that come in standard linux distros)

  Read the article

• MS SQL 2005 Express on a Phenom 9650.

  - by Ron Vyskocil

  Will MS SQL 2005 Express run and utilize the quad core processor of a Phenom X4 9650?

  Read the article

• Time difference between servers after disaster recovery

  - by Sandokan

  We are running an old training system based on Windows Server 2003 and XP-clients. The solution is rather simple with four servers, two of them beeing DC:s. Everything is preconfigured and that goes for backup scheme as well. The backup software is Symantec BackupExec 2010. The scheme is a standard GF-F-S routine with full backups running once a week on Sundays. The other six days run differential backups. Now let's say in a worst case scenario, a server crashes on Saturday and we have to restore it from backup. The last backup will then be six days old and thus it will come online with six days old configurations. Will this pose a problem for the other servers or will the recovered server "get in line" eventually?

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Schedule a batch file with parameters containing spaces

  - by Danilo Brambilla

  Hi, I need to schedule a task in Windows Server 2003 that executes this script that deletes files older that n days in the specified folder. The script needs 3 parameters: %1 path to folder where files need to be deleted %2 file names (es. *.log) %3 number of days @echo off forfiles -p %1 -s -m %2 -d -%3 -c "cmd /c del /q @path" The script works fine if the first parameter has no spaces inside. This is an example of parameters that work: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" N:\FOLDER\FOLDER *.zip 60 This is an example that does not work: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" N:\Program Files\LOG *.zip 60 This does not work too: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" "N:\Program Files\LOG" *.zip 60 I think it would be a quotes problem but I can't figure out the solution. I'd like not to insert values directly into the script if possible Thank you all for help

  Read the article

• Time issues on the Network -- How to find the Root Cause

  - by Jeff

  A number of application servers started erroring out in my domain. Troubleshooting led me to a missconfiguration of NTP. I fixed the issue, but I don't know how the issue arose in the first place. The only errors I can find are System Error: 1097 Source: useenv System Error: 1058 Source: useenv System Error: 1030 Source: useenv System Error: 1000 Source: mmc How else can I find out why NTP started acting up on my domain? Is there any troubleshooting steps to diagnose why my DC started pulling from a random timeserver with the wrong time? EDIT: Current issue actually remains: the two 2003 DCs are not syncing with the PDC (a 2k8 box). w32tm /resync -- The computer did not resync because no time data was available.

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >