Search Results

Search found 4721 results on 189 pages for 'traffic'.

Page 63/189 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• SharePoint 2010 MySites - Simple explanation needed!

  - by Chris W

  I've been playing around with the 2010 beta for a couple of weeks, experimenting with topology options etc. I think I've got myself totally confused as to how it works hence if there's any SP experts out there that can explain things in simple terms for me I'd appreciate it! I want to setup a farm with 3 servers providing the content & MySites. I presume that the way to do this is to load balance or DNS round robin traffic between the 3 servers. The bit where I'm confused is that My Site Settings page asks for a specific My Site Host hence all my site traffic will be pushed to a single server even though we have 3 in the farm. If this hosts fails I presume MySites will be unavailable. Is this right? How do I configure it so that access to MySites is load balanced across the 3 servers in the farm?

  Read the article

• 2 DSL lines...any benefit?

  - by EJB

  I have verizon DSL in my office, I put DSL in about a year ago for $29.95 month...I added a new phone line recently and it was cheaper to actually get it bundled with DSL so now I have two DSL lines...my plan was to shut the first one off when my 1 year contract comes up (in September). A couple of times DSL has gone out on one line so I just used the other, which is a nice redundancy to have - but it doesn't happen often. (I unplugged one line and plugged in the other) Question is, is there any way to use both DSL lines together so that 1) I can increase bandwidth and effective speed might increase (is that possible?) or 2) have them both on and connected someway so that traffic on my network would just use either one, and if one went down the traffic would route automatically? If I can either increase speed by having two, or at a minimum get some automatic redundancy, I see no reason to keep both on.... Thanks!

  Read the article

• Rsync to take the newest file. And a cron job?

  - by user1704877

  I have a log file on two different servers. The servers are under a load balancer so half the traffic goes to one server, and half the traffic goes to the other server. I need to take the newest log file from one machine and transfer that log file to the other machine. So if one log file is changed on one server, it gets updated on the other server. I think I need to use rsync. And do I also need to put it in a cron job?

  Read the article

• Which TCP ports to use?

  - by rowatt

  Is there a TCP port range which I can be sure will not be used by anything else for traffic between two machines? If I am reading RFC6335 correctly, I can be sure that no other applications will use specific ports in the Dynamic/Private/Ephemeral range of 49152-65535. However, if I understand correctly, it also states (section 8.1.2) that an application shouldn't assume that any given port in that range is available at any given time, which would mean I can't be 100% sure that it will be unused all the time. Specifically, I want to assign specific SSH traffic to a different port for the security benefit and so I can classify it differently for QoS purposes, and not have to worry about changing the port in the future.

  Read the article

• Dreamweaver not connecting RDC

  - by thomas

  I am trying to use Dreamweaver to Remote Desktop Connect into a computer where a website is hosted. Normal traffic to this server is routed to another domain, but when accessed by IP (it is my understanding) the traffic never hits any sort of nameserver request, and so stays there. This server is set up so that the only way I can access it is RDC. I can connect using an RDC program, but when I attempt to use Dreamweaver, I get a vague error. The desired action could not be completed because an unexpected client/server communication error occurred. I have Web URL as http://my.ip.number/directory And in the settings panel, I have Host name: my.ip.number Port: 3388 Host directory: C:\Program Files (x86)\directory/directory Username: user Password: ••••••• What could be preventing Dreamweaver form connecting? Thanks! SERVER DETAILS It is a virtual server Windows SERVER 2008 R2 Standard Service Pack 1

  Read the article

• VPS stops responding every now and again

  - by Or W

  I have a Linode vps that I use to host some of my websites on. It's Ubuntu based and it's up to date in terms of all packages. I don't have any cron jobs scheduled or any automatic processes. I host a few (up to date) wordpress blogs there that have very little traffic altogether. Every day (at a different time) my server stops responding, I can't SSH to it, web access is getting timed out and it just dies until I reboot it through the Linode manager. On the linode dashboard I can see that the CPU is not very high (2-3%) Incoming/Outgoing traffic is on 0 and the IO count has a spike just before the server stops responding (SWAP IO is at 2k and IO Rate is at 5k). When I reboot the server everything is just fine. I'm trying to figure out a way to analyze what's going on at these random times where the server freezes up. How can I determine the problem?

  Read the article

• Are there any tools for monitoring individual Apache virtual hosts in real-time?

  - by Dave Forgac

  I'm looking for a way to monitor and record Apache traffic, separated by virtual host. I am currently using Munin to capture this and other data for the entire server however I can't seem to find a way to do this by vhost. This link describes using a module called mod_watch which is apparently no longer in development: http://www.freshnet.org/wordpress/2007/03/08/monitoring-apaches-virtualhost-with-munin/ The file that is listed as being compatible with Apache 2.x is reported to have problems with missing vhosts an reporting data correctly. Does anyone know of a reliable way to determine real-time traffic per vhost? If I can find this it should be easy enough to write a new Munin plugin.

  Read the article

• System Center 2012 R2 System Discovery Network Utilization

  - by AtomicReaction

  I'm in charge of a deployment of Microsoft System Center Configuration Manager 2012 R2. Currently, I'm working through the discovery methods and trying to decide how to enable automatic discovery of systems and users. On Microsoft's documentation, they warn that Configuration Manager Automatic Discovery traffic can get pretty significant if you aren't careful in your implementation. Can anyone who has used this give me some information on how much traffic I should expect? We currently have around 1000 computers and 4000 user accounts in Active Directory. Thanks!

  Read the article

• PHP and load balancing

  - by StCee

  I have one major domain but the server spec behind it is not good enough. Hence I want to relay the traffic, in particular php-mysql queries to multiple smaller servers. How is that normally be done? (BTW I wonder how much traffic or number of php/mysql request a normal setup on ec2 micro instance can handle? ) I did have a look of EC2 load balancer. But is it only possible to load balance on machines of your own account?

  Read the article

• KVM guest storage difference with NBD and NFS

  - by WojonsTech

  I am setting up my own little private cloud for my own use maybe for a project or to. I am using linux kvm on debian 6. I have 3 servers 2 of them for compute nodes and 1 storage node. I would I have already installed kvm made a few test machines got my networking setup. I have 2 nics on each server 1 nic is for web traffic other nic is for network traffic. My first Idea was to use NFS for storing the guest machines which can range in size, maybe 8gb maybe 100gb, it just depends. I was doing have heard of nbd before seems like it could work but I dont know what the performance differences are and if it will effect my enviroment, nfs looks like it will be easier to use.

  Read the article

• What is the best way to configure the number of workers in Apache?

  - by rbm

  My site receives a lot of traffic for 2 hours during the day (2000 hits per minute). The rest of the day receives less traffic(500e hits per minute). I have been experimenting with the MaxClients and MaxSpareServers values but I still get some downtime during peek hours. How can I calculate the best values for my configuration based on the amount of ram that I have ? Each process is like 36-40 M of Memory total used free shared buffers cached Mem: 3096 793 2302 0 0 0 -/+ buffers/cache: 793 2302 Swap: 0 0 0 Values that I am using now <IfModule prefork.c> StartServers 10 MinSpareServers 22 MaxSpareServers 60 ServerLimit 90 MaxClients 90 MaxRequestsPerChild 400 </IfModule>

  Read the article

• How to tunnel local port through proxy server?

  - by Joe Casadonte

  I have a non-proxy-aware program that I need to get working through an HTTP proxy server. The program (MYPROG) running on a machine I can configure at will (MYSRV) connects to a specific server (DESTSRV) on a specific port (DESTPRT). There is an existing HTTP proxy server (PROXYSRV:PROXYPRT) that will allow the traffic through if MYPROG was proxy-aware, but it isn't. Is there a way to listen locally on a specific port and forward the traffic through the proxy server? I can totally configure where MYPROG points to, so I could point it to MYSRV:4545 with the thought that some wonder program will redirect the data to DESTSRV:DESTPRT through PROXYSRV:PROXYPRT. I'm thinking IP Tables or netcat could do the trick if only I could figure them out... Thanks!

  Read the article

• How to schedule download of windows 7 updates?

  - by atoMerz

  To put it short: I'd like to schedule my windows updates to start/stop at certain times of day. How can I do this? More explanation: This is because my internet traffic is limited by ISP and it's free only during a specific period throughout the day (2:00am-7:00am). I've set windows update setting to check for updates but notify me before downloading in order to prevent it from automatically using up my traffic. But then I have to manually tell it when to start downloading. I obviously don't want to stay up that late just to push a button. So again, how can I schedule windows updates to start/stop at specified times?

  Read the article

• Server Requirement and Cost for an android Application [duplicate]

  - by CagkanToptas

  This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers Can you help me with my capacity planning? 2 answers I am working on a project which is an android application. For my project proposal, I need to calculate what is my server requirements to overcome the traffic I explained below? and if possible, I want to learn what is approximate cost of such server? I am giving the maximum expected values for calculation : -Database will be in mysql (Average service time of DB is 100-110ms in my computer[i5,4GB Ram]) -A request will transfer 150Kb data for each request on average. -Total user count : 1m -Active user count : 50k -Estimated request/sec for 1 active user : 0.06 -Total expected request/second to the server = ~5000 I am expecting this traffic between 20:00-1:00 everyday and then this values will decrease to 1/10 rest of the day. Is there any solution to this? [e.g increasing server capacity in a specific time period everyday to reduce cost]

  Read the article

• How can I monitor ports on Windows?

  - by Olav

  What is the simplest way on "local" (1*) Windows, for known ports, to: Find out if it is used. Find out as much as possible about what is behind the port. Find out as much as possible about traffic through the port. Find out if something else is interfering with the port and traffic to it. I have used Fiddler in the past, but I think that's mostly HTTP? I don't if Wire-shark does more? I think there is a tool closely integrated with Windows? Which one? (5). I am looking at NMap, but its seems to be more a suite of tools, and a high entry level. 1*: Primarily this is for what happens inside my Windows Machine, but if necessary, I can for example use a VM, or the wireless connection.

  Read the article

• process ksoftirqd consumes permanent 15% CPU load [closed]

  - by markus

  Possible Duplicate: Anyone else experiencing high rates of Linux server crashes during a leap second day? The process ksoftirqd/0 uses permanent 15% CPU on our debian squeeze server. 4 root 20 0 0 0 0 R 15.0 0.0 850:59.17 ksoftirqd/0 I already read that this can have various reason like Full harddisk or high network traffic. In our case we do have more or less low network traffic and enough space on hard disk. How can I analyse what causes ksoftirqd/0 to use permanently 15% CPU?

  Read the article

• SSH tunnel doesn't work

  - by s1ck

  I am trying to use my server as a "proxy" with ssh. However, setting up tunneling with ssh -D localhost:8000 user@myserver does not work. I tested this on various machines with ssh and putty - It connects just fine, but when I set my browser settings accordingly, I just get an error "Connection has been reset". I tried monitoring the traffic with wireshark, but I didn't even see some tunnel-traffic. I explicitly set AllowTcpForwarding to "yes" but I still can't use the tunnel. When running ssh in verbose mode, I don't get any errors but debug1: Connection to port 8000 forwarding to socks port 0 requested. debug1: channel 3: new [dynamic-tcpip] debug1: channel 3: free: dynamic-tcpip, nchannels 4 What am I doing wrong?

  Read the article

• Accessing Application Server directly by public IP in citrix Farm

  - by EmilioG

  I have an citrix application server in SiteB and I have a Farm in SiteA. We want to add this server into that Farm in SiteB, and access it from the internet via web interface. SiteA and SiteB are connected via VPN. But we would like to do that in a way the ICA traffic goes directly to the application server public IP (behind NAT) in siteB without using siteA and the VPN to route this traffic. Do you know if this is posible? Maybe there is a way to change the host in the ica file for this server in the webinterface (without editing manually each time)? We are using Citrix 4.5. Thanks in advance.

  Read the article

• Windows Firewall 2008 Server - Allow only given IP in, block all others

  - by chumad

  I've got a Windows 2008 Server. It has the built-in windows firewall on it. I've played around with the Advanced settings where I can setup inbound/outbound rules, but it doesn't appear that I can create a rule that would say "Block All incoming traffic except traffic coming from this IP address" I created a rule that Blocks All, but there's no way that I've found to create a rule that will "override" the block rule and allow 1 or more IP's to get in. I accomplished this on a Win2k box using IPSEC, but it seems that IPSEC is now built-in to windows firewall. Any tips?

  Read the article

• ssh tunnel through an intermediate host

  - by user1190650

  I have configured an SSH tunnel to forward my web traffic from hostA to hostC using this command on hostA: ssh -D 2222 user@hostC after configuring my browser to use a proxy on port 2222. This works great. However, I now want to forward the same traffic through an intermediate SSH connection on hostB in order to get to hostC. I tried this on hostA: ssh user@hostB -L 2222:hostB:22 but I get "channel x: open failed" errors. Does anyone know the correct way of doing this?

  Read the article

• hosting website on a private network

  - by razor

  i'm currently running a website off 3 linux servers. I'd like to setup a private network and only allow port 80 traffic to one of the servers. I'd also like to setup a vpn so only I can access the servers via ssh or any port for developing/debugging. How hard is this to setup and what do I need to get? Do enterprise/commercial routers have vpn functionality built in? how do I handle DNS? eg- www.mydomain.com would need to point to the router, which forwards traffic to the webserver. Do I set the A record to the router, and somehow tell the router which server to send the http request to? And how would I make server1.mydomain.com resolve to server1 within the private network (without editing host files)? Would I need to run my own DNS (eg- powerdns?) to do this?

  Read the article

• Block a Server from reaching a machine

  - by user

  I have a Windows 2003 server that I want to block from accessing a specific IP address. I want to control this from the Server. because I control the machine. The traffic is http traffic (webservice call). It uses a non-standard port, so IP address+ Port combination would also work. Background: I have a development enviornment that for some reason is ignoring host file enteries under some circumstances. These host files point the enviornment at services in another Dev enviornment. Wne th host files are ignored, dev is talking to production. This is not my question, rather the motivation for this inquiry. I want is a failsafe to ensure dev will error instead of happily engaging in transactions with production. I control the dev server, I do not control the firewalls or the target production machine.

  Read the article

• redirecting arbitrary tcp/udp in kvm

  - by jbfink

  I've got a server with KVM on it, and multiple guest VMs. I'd like a way to redirect traffic from the host server to the VMs. Like, say, forward all traffic on port 2222 on the host to 22 on a guest VM for ssh. This would have to be done either through virt-manager or libvirt XML config files -- I've found multiple references to doing it through qemu (like http://forums.fedoraforum.org/showthread.php?t=237969) but absolutely nothing that I can see related to either libvirt or virt-manager. Do you know how I can do this?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >