Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 631/754 | < Previous Page | 627 628 629 630 631 632 633 634 635 636 637 638  | Next Page >

• Resize Win2003 system+boot partitions to bigger disks & different controller?

  - by ane

  Have an old Win2003 server with 1 SCSI hard drive partitioned as follows: D: boot (includes D:\ntldr, boot.ini, etc.) C: system (includes C:\WINDOWS) Want to move the whole system to new hardware with bigger drives and different controllers. Specifically, C: to a 300GB SAS drive, and D: to a 2TB SATA drive. Tried: VMWare Converter - VMWare Server - Diskpart Result: Diskpart refuses to resize system or boot disks VMWare Converter - VMWare Server - GParted Result: Will not boot (see http://serverfault.com/questions/219868/resize-ntfs-system-partitions-with-gparted ) Attach original VMWare disk to a duplicate VMWare install - Diskpart Result: Will not boot (goes to Directory Services Restore mode) Backup Exec System Recovery Server Edition 2010 with Restore Anywhere (tried restoring both to VMWare and to the bare system, without VMWare) Result: Windows Boot error: Could not read from the selected boot disk. Check boot path. Supposedly this is a boot.ini problem, so I try bootcfg /rebuild from the recovery console. Says it can't find windows partition so it can't rebuild. Thought about Ghost but it's completely different hardware/controllers that we're restoring to, so I doubt it would boot. Reinstalling Windows from scratch is not an option due to critical custom software heavily embedded on the original machine. Has anyone been in a similar situation (with unusual boot/system partitions) before and figured out how to resize onto different disks?

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

  - by Dave

  Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

  Read the article

• Why does Windows make random "device connect" and "device disconnect" sounds?

  - by Steve Elmer

  Hello, I've been noticing this since Windows Vista. I see it on Windows 7, now, as well. In any case throughout the day I notice that my computer makes apparently random device-connect and/or device-disconnect ("boink") sounds. I suppose it is the same sound you hear when connecting or disconnecting a USB device such as a thumb drive. I've noticed that this happens on each of three computers I work with at home, my wife's computer, and my machine at work. It happens without any user action at all - i.e. I'll be just sitting there (hands off my mouse and keyboard), and the computer will make the sound. There is no visual queue or anything. Just the sound. I have sometimes gone in pursuit of the sound - running virus scans, examining event logs and such, and observing task manager - but have never had any luck tracking this thing down, but have not had any luck. Surely someone else out there must be experiencing this, too. Any ideas? Thanks, Steve

  Read the article

• Why does Windows make random "device connect" and "device disconnect" sounds?

  - by Steve Elmer

  Hello, I've been noticing this since Windows Vista. I see it on Windows 7, now, as well. In any case throughout the day I notice that my computer makes apparently random device-connect and/or device-disconnect ("boink") sounds. I suppose it is the same sound you hear when connecting or disconnecting a USB device such as a thumb drive. I've noticed that this happens on each of three computers I work with at home, my wife's computer, and my machine at work. It happens without any user action at all - i.e. I'll be just sitting there (hands off my mouse and keyboard), and the computer will make the sound. There is no visual queue or anything. Just the sound. I have sometimes gone in pursuit of the sound - running virus scans, examining event logs and such, and observing task manager - but have never had any luck tracking this thing down, but have not had any luck. Surely someone else out there must be experiencing this, too. Any ideas? Thanks, Steve

  Read the article

• Malware Defense Shows Up in PlayOn Settings/Logs Although System Has Been Thoroughly Cleaned

  - by nicorellius

  I was hit really hard by some nasty malware: Malware Defense. I was doing something I should not have been doing when I got it (surfing Pirate Bay for TV shows). It locked up my system and I had to reboot in safe mode. I was able to shut down the process and remove it using a malware killer tool. I then installed, after my machine was cleaned up a bit, Clamwin, Malwarebytes, and another AV tool. I cleaned the heck out of my system. Simultaneously, while this was going on, I was having trouble with my media-server, PlayOn. This tool is great, but has some bugs. One in particular is that it will not function well with AV software running. I found a way to allow the new AV software to run while using PlayOn, but it still says I have Malware Defense on. Firstly, Malware Defense is long gone. I cleaned all remnants from my registry and scoured my system with the above tools multiple times. PlayOn is getting some information that I have this crap installed on my system, but it's not. The system runs OK, but not optimally. I have a feeling it is causing my streaming to be interrupted sometimes. How is it that I can't even find Malware Defense on my system if I tried but yet somehow PlayOn is getting a finger print of it somewhere? I have gone back and forth with MediaMall to no avail. I kind of just gave up, because the streaming works OK. BTW, I also uninstalled/reinstalled PlayOn several times, reverted back to previous versions, etc. The only thing I haven't done is reformat my disk and reinstall Windows. I really don't want to do this if there is another way to remove this little print. Any ideas?

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• How can you connect to a SQL Server not on your domain?

  - by scotty2012

  I have a test machine that's not allowed on our domain because we are testing corporately unsupported applications (SQL 2008 and Server 2008). I want to use management studio to connect to the SQL2008 server but can't get it working. I have authentication set to mixed-mode, I've checked 'allow remote connections to this server', but when I try to access it, I get the error A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53) Since it says the provider is Named Pipes, I enabled Named Pipes on the server, but still no dice. I've tried connecting to the system name, the IP, the system name\instance and IP\instance, all to no avail. Is what I'm trying to do not possible? Edit: Well, through some basic troubleshooting, I've found that I can't ping the server from my client computer, but I can ping the client computer from the server? They are both plugged into the same switch, and are sitting next to each other. The windows firewall on the server is turned on, is there some specific settings I need to enable? DAH! So it was the firewall blocking me. How can I enable the firewall and still connect?

  Read the article

• KVM and JBoss Java Application Server

  - by Jason

  We have a large Xen deployment running on both RHEL and CentOS and have recently started looking at KVM since this is where it looks like the future of VM's are on Linux. We can load the server and get everything running without an issue. However when we load up a new one with JBoss (4.2 Community edition, Sun JDK 6) and load a large EAR the server goes a little crazy. The %sy will jump to 80-99% and just hang for large periods of time we see a similar jump in %us on the host machine. We though at first this might be I/O as it seems to happen at start of JBoss but then would "cool down" after everything got loaded. We did some tests by extracting some large tar.gz files and using jar -xvf on the ear but could not re-create. Then we starting thinking this might be some type of memory access issues. We loaded a c-program that would generate a lot of memory activity and sure enough we saw the spikes again. Not as high mind you but we did see it jump. We then wrote a small java program to do the same thing and sure enough we saw it jump again. Any thoughts on what might be causing this? Is this just the way KVM works? As a side note we do NOT see this behavior on any other setup. Xen, VMWare and/or native iron. The system does seem a bit slower than our Xen / VMware ones.

  Read the article

• VirtualBox VM running web server not accessible via external IP

  - by mwigdahl

  I have a Windows 7 machine running VirtualBox with an Ubuntu guest. The guest has a Bitnami LAMP stack installed. I have the guest configured for Bridged networking, and I can access the guest web server just fine from other machines on my LAN using the guest's IP. I'm trying to configure port forwarding so that I can access the web server from outside my LAN. (The router is a 2WIRE model as I'm on ATT's UVerse). I've set up port forwarding for ports 80 and 443 to the guest's IP in a similar manner to how I had them set up for my previous, physical web server, which worked just fine. However, I cannot seem to access the new, virtual web server using my external IP on the forwarded port. I suspected Windows Firewall issues on the host, but disabling it didn't solve the issue. Anyone have advice on what I should try next? EDIT: I've now attempted disabling the firewall on the guest with sudo ufw disable -- that doesn't seem to help either. However, after checking the router's port forwarding in more detail I may see the problem. My VM is named "linux" and in the router's configuration pages it shows up inconsistently. Sometimes it reports with a valid LAN IP and other times it doesn't show up with any IP. Even when it shows the correct IP the router indicates that it is disconnected. Could this be an indication that the 2WIRE router doesn't play well with VirtualBox's bridged networking mode?

  Read the article

• How do I remove encryption from a VMware Workstation 7 image?

  - by Chad

  I successfully encrypted a VM image and confirmed it still runs. I then closed the VM and reopened it and confirmed the encryption password was valid and worked. However, now I want to un-encrypt the VM. When I choose that option, it asks for "your password". I assume this means the password I created when I encrypted it. It doesn't work. I can still open the VM with the password and run it. But, it refuses to remove the encryption using that password. Am I missing something? Is there a password that I don't know about? Some details: I created this image (using standalone converter; physical machine source) I converted it to ACE Converted back to a normal VM (un-ACE'd it) Encrypted it Cannot remove the encryption but can open it and run it As you can see... I am exploring the VMware features. Thanks for any guidance you can give.

  Read the article

• Maintaining "Portability" Between Linux and Windows 7

  - by lokheart

  I am using the following ways in my office's Windows 7 machine to maintain my "portabilibity" when disaster strikes and I need to switch computer while I have no luxury of time for reinstalling all my program to the new PC. a majority of programs I used are portable, mostly from portableapp.com, like notepad+, GIMP, even R, I extract them and store them in a folder in My document, in a structure similar to the default portableapp installation when they are installed to a thumbdrive only a few software that portable version is not available and I will install them as usual all of my working files are stored in a folder in My document I regularly backup them all using syncback, because this program can keep versioning of my backup, and the backup is stored in a portable drive. One day I need to switch my computer and the operation is relative simple for me: I just move the two folders mentioned above into the my document folder of the new PC, install those few "non-portable" program in it, and this is almost done, some minor hiccups can be solved by reinstalling the portableapp into the drive. Overall speaking it is a smooth process. I would like to maintain the same degree of "portability" in my home Linux desktop (Ubuntu or Mint, I'm still deciding), that is, if my Linux crash and I need to reinstall it again. All I need to do is the move the two folder back to the new Linux, and most of my work will be almost ready to be worked on again. But I don't know how to find a Linux-alternative of portableapps. Being a newer to Linux, can anyone tell me whether this is possible in Linux?

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• How to set up port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

  - by mairtinh

  The basic situation that I have is a dedicated server running CentOS 5.4 At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running. The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding. Here's what I've tried so far. The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.) First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest. Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside. I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 . I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• Server freezes while installing Redhat Enterprise Linux Server 6

  - by eisaacson

  We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

  Read the article

• Dynamic DNS Updates with Wireless and Wired interfaces

  - by Phaedrus

  We have offices full of Windows & Mac users who obtain IP addresses from a Windows DHCP server, which in turn updates Dynamic DNS entries. We are noticing major inconsistencies with the entries, and have found that the problem is occurring more on Macs than on windows, and even more when users are frequently switching from wired to wireless adapter, which makes sense, as this sequence occurs: User enables wired adapter and registers Proper DNS User enables wireless adapter and registers 2nd proper DNS entry user switches off wireless manually and 2nd entry remains improperly until scavenge. Our help desk folks rely heavily (maybe more than they should) on the dynamic entries as part of their business process. For example, the user submits a help desk ticket, and the staff member expects to be able to remote desktop to their machine by hostname, which is hyperlinked in the helpdesk ticketing app. We have implemented multiple solutions & band-aids to different symptoms of the problems such as: Using DNS Reservations for Macintosh PCs Using DNS Scavenging to remove old records Switching from a Cisco DHCP server to the Windows DHCP Server But no matter what we do, it seems impossible to maintain perfect records. Has anyone encountered this problem before? What is industry best practice? Comments & Suggestions are much appreciated, /P

  Read the article

• Firefox proxy authentication with Kerberos: one service ticket per connection (Linux)

  - by Dari

  I am trying to enable proxy authentication via Kerberos for Firefox. The setup is: Active Directory domain (for LDAP and Kerberos; this works and I can log in the computer and get Kerberos tickets without problems) Microsoft Windows witness machine (on which Firefox runs fine with no ticket problem) CentOS 6.3 system with Firefox (the tests were performed with both the 10.0.1 ESR found in the CentOS package repositories and the 15.0.1 downloaded from Mozilla's website) BlueCoat proxy with Kerberos authentication enabled For the moment, Firefox requests an element of a website, gets an HTTP error code of "407 Proxy Authentication Required" from the proxy, gets a ticket granting service (TGS) from the domain for the proxy and performs the request again while passing the ticket. The transaction runs fine. However, when more elements are requested (in parallel), Firefox requests one more ticket per proxy connection. And this takes many DNS queries, Kerberos interactions with domain controllers and costs a lot of time (for example, the home page of Adobe takes several minutes to load and at the end, I have about 30 valid Kerberos tickets). I am stuck on this since a while, and help would be greatly appreciated. Minor information: the CentOS operating system is virtualized with VMware Player 3.1.3, but I do not think this would be a game changer.

  Read the article

• Are my iptables secure?

  - by Patricia

  I have this in my rc.local on my new Ubuntu server: iptables -F iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 9418 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 9418 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 5000 -m state --state NEW,ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -i eth0 -p tcp --sport 5000 -m state --state ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -p udp -s 74.207.242.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A INPUT -p udp -s 74.207.241.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT iptables -P INPUT DROP iptables -P FORWARD DROP 9418 is Git's port. 5000 is a port used to manage Heroku apps. And 74.207.242.5 and 74.207.241.5 are our DNS servers. Do you think that this is secure? Can you see any holes here? Update: Why is it important to block OUTPUT? This machine will be used only by me.

  Read the article

• WinHttpCertCfg not importing certificate

  - by Ramon Zarazua

  I need to setup a deployment script that imports an SSL certificate that my service uses. I have tried importing with WinHttpCertCfg and with CertMgr to no avail. Here are the command-line arguments I have tried to use with both: winhttpcertcfg.exe -i <certname>.pfx -c LOCAL_MACHINE\My -p <password> -a <user service runs as> and CertMgr.exe -add -all -s -r localMachine -c <cert name> My It seems from what I have investigated that CertMgr does not allow you to import certificates with a password, so I'd rather get winhttpcertcfg working. When I run them I get the following output: WinHttpCertCfg: Microsoft (R) WinHTTP Certificate Configuration Tool Copyright (C) Microsoft Corporation 2001. CertMgr: CertMgr Succeeded However, when I look into the local machine certificates in MMC, try to load them from my service, or list it out through winhttpcertcfg, or even looking at the registry in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SystemCertificates\MY\Certificates it is not found. I have tried all of the following: If I install the cert manually (Through CertMgr.msc dialogs) it works. The user installing is running as administrator The user installing has full access on the certificate The tools print out an error when something is wrong (wrong password) Tried it in multiple machines (All of them server 2008 R2) At this point I am officially out of ideas. Thank you.

  Read the article

• iptables rules to allow HTTP traffic to one domain only

  - by Emily

  Hi everyone, I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

  Read the article

• Modifier key bug with Adobe Design Standard CS4 (Mac OS 10.6.6)

  - by Andy

  When I launch the Adobe apps, they ask me if I want to delete the preferences file. I say 'no'. Then, when using the apps, none of the tools seem to work properly, eg in Illustrator, I can't move objects without it duplicating the object. Photoshop constantly displays the contextual menu icon that usually only appears when you hold down the control key. I can't do any work in them when this happens, so I am forced to log out and then back in. They work for a while and then this annoying bug happens again. I think it must be to do with the modifier keys (command option and control). I think Adobe's apps must think I'm permanently pressing the modifier keys down - the thing is, no other app on my machine has this problem! Does anyone else experience this? Or have a fix for it? Any suggestions much appreciated. Running: Mac OS X 10.6.6 on an iMac. Adobe CS4 Design standard installed.

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• Windows Media Center showing Jerky Video on PC

  - by Kris Erickson

  I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player. I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I hate the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions?

  Read the article

• Simulating audio playback on headless linux server

  - by afro

  Hi people, We have a headless linux server (Debian 5) we use for runnin integration tests of our web-page code. Among these tests are ones implemented using Selenium, which practically simulates a user browsing our pages and clicking on things. One of these tests is failing now, because it involves starting a flash-based audio player and checking to see whether the progress bar gets displayed properly. The reason this test fails is that there is no way to play the audio, and no sound card on the machine, which has simple webserver hardware. So, my question would be: Is there a simple way of giving a program the impression that its audio output is being processed, and playback is taking place? I don't have to record the playback, or redirect it or anything like that, just a dummy soundcard, like the dummy X-server we aer using, which actually does not need to display stuff. I have tried using JACK, but it's too complicated, and the documentation does not even answer this very simple question. I also installed alsa on the server; it 'pretends' to run, but when a program tries to play audio, just spews error and debug information having to do with the non-existence of a soundcard. It would be really awesome if one of you has a simple answer to this question. Cheers, Ulas

  Read the article

< Previous Page | 627 628 629 630 631 632 633 634 635 636 637 638  | Next Page >