Search Results

Search found 16892 results on 676 pages for 'linear search'.

Page 632/676 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

• Is there an IDE that can simplify the process of creating a game matchmaking website?

  - by Scott

  Yes, I'm an old guy. And I'm well versed in "C" and have written several games which I have been selling on the web for a number of years. And now, I would like to adapt one of my games to be "online". Sounds simple. I'm sure I can use the thousands of lines of "C" code that I've already written. Right? So my initial investigation begins. First, I think I'll need a server program that lives on a dedicated server (or a VPS probably) that talks to a bunch of client applications that live on individual devices around the world. I can certainly handle that! (I think to myself). I'll break up my existing game into two pieces, a client piece that is just the game displays and buttons, and a server piece that does everything else. Piece of cake, right? But that means that the "server piece" must be executed on a remote machine somewhere and run 24/7. Can I do that? [apparently, that question is so basic, so uneducated, and so lame, that nobody has ever posed it before. Because hours of Googling does not yield an answer. Fine. I'll assume I can do that and move on.] I'll need a "game room", which to me means a website where you log in and then go to a lobby of some kind where you can setup your preferences, see if any of your friends are connected, and create or join games. Should be easy, but it's not. No way. Can I do all this with my local website builder? (which happens to be 90 Second Website Builder, a nice product, btw). It turns out, I can not. I can start with that, but must modify each page, so I can interact with my sql database. So I begin making each page a "PHP" page and dynamically modifying the HTML code with PHP code. I'm already starting to get a headache. Because the resulting web pages looked terrible, I began looking at using JQuery. I want to user a JQuery dialog on my website to display a list of friends and allow the user to select one to invite to the game. [google search for "how to populate a JQuery dialog from a sql database" yields nothing but more confusion.] Javascript? Java? HTML? XML? HTML5? PHP? JQuery? Flash? Sockets? Forms? CSS? Learning about each one of these, and how they interact with each other and/or depend on each other is too much for my feeble old brain. Can anyone simplify this process for me? Is there an IDE that will help me do all this without having to go back to college for a few years? Thanks, Scott

  Read the article

• Surviving MATLAB and R as a Hardcore Programmer

  - by dsimcha

  I love programming in languages that seem geared towards hardcore programmers. (My favorites are Python and D.) MATLAB is geared towards engineers and R is geared towards statisticians, and it seems like these languages were designed by people who aren't hardcore programmers and don't think like hardcore programmers. I always find them somewhat awkward to use, and to some extent I can't put my finger on why. Here are some issues I have managed to identify: (Both): The extreme emphasis on vectors and matrices to the extent that there are no true primitives. (Both): The difficulty of basic string manipulation. (Both): Lack of or awkwardness in support for basic data structures like hash tables and "real", i.e. type-parametric and nestable, arrays. (Both): They're really, really slow even by interpreted language standards, unless you bend over backwards to vectorize your code. (Both): They seem to not be designed to interact with the outside world. For example, both are fairly bulky programs that take a while to launch and seem to not be designed to make simple text filter programs easy to write. Furthermore, the lack of good string processing makes file I/O in anything but very standard forms near impossible. (Both): Object orientation seems to have a very bolted-on feel. Yes, you can do it, but it doesn't feel much more idiomatic than OO in C. (Both): No obvious, simple way to get a reference type. No pointers or class references. For example, I have no idea how you roll your own linked list in either of these languages. (MATLAB): You can't put multiple top level functions in a single file, encouraging very long functions and cut-and-paste coding. (MATLAB): Integers apparently don't exist as a first class type. (R): The basic builtin data structures seem way too high level and poorly documented, and never seem to do quite what I expect given my experience with similar but lower level data structures. (R): The documentation is spread all over the place and virtually impossible to browse or search. Even D, which is often knocked for bad documentation and is still fairly alpha-ish, is substantially better as far as I can tell. (R): At least as far as I'm aware, there's no good IDE for it. Again, even D, a fairly alpha-ish language with a small community, does better. In general, I also feel like MATLAB and R could be easily replaced by plain old libraries in more general-purpose langauges, if sufficiently comprehensive libraries existed. This is especially true in newer general purpose languages that include lots of features for library writers. Why do R and MATLAB seem so weird to me? Are there any other major issues that you've noticed that may make these languages come off as strange to hardcore programmers? When their use is necessary, what are some good survival tips? Edit: I'm seeing one issue from some of the answers I've gotten. I have a strong personal preference, when I analyze data, to have one script that incorporates the whole pipeline. This implies that a general purpose language needs to be used. I hate having to write a script to "clean up" the data and spit it out, then another to read it back in a completely different environment, etc. I find the friction of using MATLAB/R for some of my work and a completely different language with a completely different address space and way of thinking for the rest to be a huge source of friction. Furthermore, I know there are glue layers that exist, but they always seem to be horribly complicated and a source of friction.

  Read the article

• Silverlight Cream for June 01, 2010 -- #874

  - by Dave Campbell

  In this Issue: Michael Washington, Alan Beasley and Michael Washington, Miroslav Miroslavov, Max Paulousky, Teresa and Ronald Burger, Laurent Duveau, Tim Heuer, Jeff Brand, Mike Snow, and John Papa. Shoutouts: To pay homage to the Advanced Options button in Expression Blend, Adam Kinney posted: Expression Blend Advanced Options square wallpaper SilverLaw stood his drag and drop ripple on it's head for this one: Silver Soccer - A Case Study for the Flexible Surface Effect (Silverlight 4) From SilverlightCream.com: Expression Blend DataStore - A Powerful Tool For Designers Michael Washington dug into the documentation and with some Microsoft assistance has figured out how to use the SetDataStoreAction in SketchFlow... good tutorial and a game to demonstrate it's use. Windows Phone 7 View Model Style Video Player Alan Beasley and Michael Washington teamed up again to produce a ViewModel-Style Video Player for WP7 ... very nice interface I might add... very detailed tutorial and all the code... oh, and did you notice it uses MVVMLight... on WP7? ... just thought I'd mention that :) Navigation in 3D world of 2D objects In part 7 of the CompleteIT code explenation, Miroslav Miroslavov is discussing some of the very cool animation they did... 3D, moving camera... cool stuff! Search Engine Optimization (SEO) for Silverlight Applications. Part 2 Max Paulousky has part 2 of his Silverlight 4 and SEO series up. In part 2 he's discussing sitemaps and html content providing. He also has good links showing where to submit your sitemaps and information. Mousin’ down the PathListBox Teresa and Ronald Burger (not sure which) has a post up about the PathListBox and how they drew the path that they ended up using, and the code used to enable animation. Dynamically apply and change Theme with the Silverlight Toolkit We've all had fun playing with themes, but Laurent Duveau has an example up of letting your users change the theme at run-time. Microsoft Translator client library for Silverlight Tim Heuer has been playing with the Microsoft Translator for Silverlight and he has a "Works on My Machine" license on what he's making available .. but considering his access to resources... I'd say go for it :) Custom Per-Page Transitions in Windows Phone 7 Jeff Brand has a follow-on to his other WP7 post about page transitions and is now discussing per-page transitions Silverlight Tip of the Day #26 – Changing the Startup Class Mike Snow's latest 'tip' is a little more involved than a tip ... changing the startup class and actually removing (in his example), the page and app classes... code and xaml! I've seen this before but never explained as clean... fun stuff. Behaviors in Blend 4 (Silverlight TV #30) Episode 30 of Silverlight TV (now a tag at Silverlight Cream) finds John Papa talking to Adam Kinney about Behaviors in Blend 4... not only using them but creating a custom one. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Notes from a short presentation on NodeJs

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/05/30/notes-from-a-short-presentation-on-nodejs.aspxI volunteered myself to give a short 30 minute presentation at a work lunch and learn on NodeJs. With my limited experience I see using Node as a great tool for build process improvement, scaffolding with yeoman, and running tests with Karma. I haven’t looked into using as a full server or development stack. I guess I’m too stuck on IIS and Visual Studio :-). Here are my notes, that aren’t very well formatted, but I wanted to share it anyways. What is it? "Node.js is a platform built on Chrome's JavaScript runtime for easily building fast, scalable network applications. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient, perfect for data-intensive real-time applications that run across distributed devices." Why should you be interested? another popular tool that can help you get the job done you can use the command prompt! can be run at build or release time to automate tasks What are some uses? https://www.npmjs.org/ - NuGet for Node packages http://bower.io/ - NuGet for UI JavaScript libraries (jQuery, Bootstrap, Angular, etc) http://yeoman.io/ "Our workflow is comprised of three tools for improving your productivity and satisfaction when building a web app: yo (the scaffolding tool), grunt (the build tool) and bower (for package management)." -> yeoman asks which components you want alternative - http://joakimbeng.eu01.aws.af.cm/slush-replacing-yeoman-with-gulp/ https://www.npmjs.org/package/generator-cg-angular - phantom js, less, // git is needed for bower http://git-scm.com/ run installer in Windows before you can use bower // select Run Git from the Windows Command Prompt in the installer // requires a reboot http://stackoverflow.com/questions/20069297/bower-git-not-in-the-path-error npm install -g git npm install -g yo npm install -g generator-cg-angular mkdir myapp cd myapp yo cg-angular npm install -g bower npm install -g grunt-cli yo bower grunt serve grunt test grunt build // there are many generators (generator-angular) is another one // I like the Nuget HotTowel-Angular from John Papa myself // needed IIS Node for Express -> prompt from WebMatrix Karma bat to startup Karma - see below image compression - https://www.npmjs.org/search?q=optimize+images, https://github.com/heldr/node-smushit - do it from the command line LESS compiling js and css combine and minification at build with Gulp for requireJS apps quick lightweight HTTP server - "Express" Build pipeline with Grunt or Gulp http://www.johnpapa.net/gulp-and-grunt-at-anglebrackets/ Gulp is the newer and improved over Grunt. Supposed to be easier to use, but Grunt is more established. https://github.com/johnpapa/ng-demos/tree/master/grunt-gulp https://github.com/assetgraph/assetgraph-builder Does a lot of the minimizing, combining, image optimization etc using Node. Looks interesting.... http://nodejs.org http://nodeschool.io/ http://sub.watchmecode.net/getting-started-with-nodejs-installing-and-writing-your-first-code/ https://stormpath.com/blog/build-a-killer-node-dot-js-client-for-your-rest-plus-json-api/ https://codio.com/ http://www.hanselman.com/blog/ItsJustASoftwareIssueEdgejsBringsNodeAndNETTogetherOnThreePlatforms.aspx run unit tests - Karma in msBuild karma-start.bat @echo off cd %~dp0\.. REM 604800 is to make sure we only update once every 7 days call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 call npm install --cache-min 604800 -g karma-cli karma start UnitTests\karma.conf.js REM karma start UnitTests\karma.conf.js --single-run REM see karma-start.bat and karam.config.js REM jsHint comes from Nuget

  Read the article

• 65536% Autogrowth!

  - by Tara Kizer

  Twice a year, we move our production systems to our disaster recovery site.  Last Saturday night was one of those days.  There are about 50 SQL Server databases to be moved to the DR site, which is done via database mirroring.  It takes only a few seconds to failover, but some databases have a bit more involved work such as setting up replication.  Everything went relatively smooth, but we encountered a weird bug on our most mission critical system.  After everything was successfully failed over to the DR site, it was noticed that mirroring was in a suspended state on one of the databases.  We thought we had run into a SQL Server 2005 bug that we had been encountering and were working with Microsoft on a fix.  Microsoft did fix it in both SQL Server 2005 service pack 3 cumulative update package 13 and service pack 4 cumulative update package 2, however SP3 CU13 and SP4 both recently failed on this system so we were not patched yet with the bug fix.  As the suspended state was causing us issues with replication, we dropped mirroring.  We then noticed we had 10MB of free disk space on the mount point where the principal’s data files are stored.  I knew something went amiss as this system should have at least 150GB free on that mount point.  I immediately checked the main database’s data file and was shocked to see an autgrowth size of 65536%.  The data file autogrew right before mirroring went into the suspended state. 65536%! I didn’t have a lot of time to research if this autgrowth problem was a known SQL Server bug, so I deferred that research to today.  A quick Google search yielded no results but emphasis on “quick”.  I checked our performance system, which was recently restored with a copy of the affected production database, and found the autogrowth setting to be 512MB.  So this autogrowth bug was encountered sometime in the last two weeks.  On February 26th, we had attempted to install SQL 2005 SP4 on production, however it had failed (PSS case open with Microsoft).  I suspected that the SP4 failure was somehow related to this autgrowth bug although that turned out not to be the case. I then tweeted (@TaraKizer) about this problem to see if the SQL Server community (#sqlhelp) had any insights.  It seems several people have either heard of this bug or encountered it.  Aaron Bertrand (blog|twitter) referred me to this Connect item. Our affected database originated on SQL Server 2000 and was upgraded to SQL Server 2005 in 2007.  Back on SQL Server 2000, we were using the default file growth setting which was a percentage.  Sometime after the 2005 upgrade is when we changed it to 512MB.  Our situation seemed to fit the bug Aaron referred to me, so now the question was whether Microsoft had fixed it yet. I received a reply to my tweet from Amit Banerjee (twitter) that it had been fixed in SP3 CU1 (KB958004).  My affected system is SP3 CU8, so I was initially confused why we had encountered the bug.  Because I don’t read things fully, I had missed that there are additional steps you have to follow after applying the bug fix.  Amit set me straight.  Although you can read this information in the KB article, I will also copy it here in case you are as lazy as me and miss the most important section of it (although if you are as lazy as me, you won’t have read this far down my blog post): This hotfix will prevent only future occurrences of this problem. For example, if you restore a database from SQL Server 2000 to a SQL Server 2005 instance that contains this hotfix, this problem will not occur. However, if you already have a database that is affected by this problem, you must follow these steps to resolve this problem manually: Apply this hotfix. Set the file growth settings for the affected files to percentage settings, and then set the settings back to megabyte settings. Take the database offline, and then bring it back online. Verify that the values of the is_percent_growth column are correct in the sys.database_files system table and in the sys.master_files system table.

  Read the article

• DeveloperDeveloperDeveloper! Scotland 2010 - DDDSCOT

  - by Plip

  DDD in Scotland was held on the 8th May 2010 in Glasgow and I was there, not as is uaual at these kind of things as an organiser but actually as a speaker and delegate. The weekend started for me back on Thursday with the arrival of Dave Sussman to my place in Lancashire, after a curry and watching the Electon night TV coverage we retired to our respective beds (yes, I know, I hate to shatter the illusion we both sleep in the same bed wearing matching pijamas is something I've shattered now) ready for the drive up to Glasgow the following afternoon. Before heading up to Glasgow we had to pick up Young Mr Hardy from Wigan then we began the four hour drive back in time... Something that struck me on the journey up is just how beautiful Scotland is. The menacing landscapes bordered with fluffy sheep and whirly-ma-gigs are awe inspiring - well worth driving up if you ever get the chance. Anywho we arrived in Glasgow, got settled intot he hotel and went in search of Speakers for pre conference drinks and food. We discovered a gaggle (I believe that's the collective term) of speakers in the Bar and when we reached critical mass headed off to the Speakers Dinner location. During dinner, SOMEONE set my hair on FIRE. That's all I'm going to say on the matter. Whilst I was enjoying my evening there was something nagging at me, I realised that I should really write my session as I was due to give it the following morning. So after a few more drinks I headed back to the hotel and got some well earned sleep (and washed the fire damage out of my hair). Next day, headed off to the conference which was a lovely stroll through Glasgow City Centre. Non of us got mugged, murdered (or set on fire) arriving safely at the venue, which was a bonus.   I was asked to read out the opening Slides for Barry Carr's session which I did dilligently and with such professionalism that I shocked even myself. At which point I reliased in just over an hour I had to give my presentation, so headed back to the speaker room to finish writing it. Wham, bam and it was all over. Session seemed to go well. I was speaking on Exception Driven Development, which isn't so much a technical solution but rather a mindset around how one should treat exceptions and their code. To be honest, I've not been so nervous giving a session for years - something about this topic worried me, I was concerned I was being too abstract in my thinking or that what I was saying was so obvious that everyone would know it, but it seems to have been well recieved which makes me a happy Speaker. Craig Murphy has some brilliant pictures of DDD Scotland 2010. After my session was done I grabbed some lunch and headed back to the hotel and into town to do some shopping (thus my conspicuous omission from the above photo). Later on we headed out to the geek dinner which again was a rum affair followed by a few drinks and a little boogie woogie. All in all a well run, well attended conference, by the community for the community. I tip my hat to the whole team who put on DDD Scotland!       

  Read the article

• 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• My Dog, Cross-Channel Shopping, and Fusion SCM

  - by Kathryn Perry

  A guest post by Mark Carson, Director, Oracle Fusion Supply Chain Management I was walking my dog Max in an open space behind my house. As we tromped through the tall weeds I remembered it is tick season and that I should get Max some protection. While he sniffed merrily in the tick infested brush, I started shopping in the middle of an open field on my phone. I thought it would be convenient to pick up the tick medicine from a pet store on the way home. Searching the pet store website I saw that they had the medicine, but there was no information on whether the store had any in stock and there were no options for shipping it to the store for pickup. I could return it, but not pick it up which seamed kind of odd. I really didn't feel like making calls to the local stores to find out if they had it. Since the product is popular, I tried one of the large 'everything' stores. Browsing its website I could see that it could be shipped to me, shipped to the store for free, and that the store nearest to me had it in stock. Needless to say, this store became a better option. This experience is a small example of why retailers, distributors, and manufactures have placed a high priority on enabling 'cross-channel commerce.' Shoppers like you and me expect to be able to search, compare, buy and return products on-line and over the phone using a variety of devices including PDAs, tablets and in-store kiosks. The pet store lost my business because its web channel had limited information about its stores. I have spoken with many customers and prospects about cross-channel commerce. They all realize the business implications and urgency behind cross-channel commerce but recognize there are challenges to enable it. New and existing applications must be integrated together globally through a consistent cross-channel business process. Integration is required between applications that provide the initial shopping experience and delivery applications associated with warehouses, stores, and partners. The enablement must be accomplished in a flexible way to react to fast-changing product portfolios and new acquisitions, while at the same time minimizing costs through reuse of existing systems. Meanwhile, the business must continue to grow and decision makers need to balance new capability with peak seasons. The challenges above are not unique to retail. Any customer in any industry who has multiple points for capturing orders and multiple points for fulfilling orders will face these challenges. With this in mind, we had a unique opportunity in Fusion SCM to re-think how to build a set of modular and flexible applications in the order management space that would make these challenges easier to conquer. The results are Fusion Distributed Order Orchestration and Global Order Promising. These applications can help companies, such as the pet store, enable true cross-channel commerce. The apps provide highly adaptable and flexible business processes to automate order orchestration across multiple cross-channel systems. They also show a global view of supply across warehouses, stores, and partners for real-time availability and more accurate order promising. Additional capability includes a standards-based integration framework for seamless execution and the ability to reuse existing systems for faster and lower cost implementations. OK, that was a mouthful of features and benefits. As Max waited to cross the street (he can do basic math too), I wondered if he could relate. He does not care about leash laws, pick-up courtesy, where he can/can't walk, what time of day it is, or even ticks. He does not care about how all these things could make walking complicated. He just wants to walk. Similarly, customers just want to shop and companies just want to make it easier to sell and deliver. You can learn more about Distributed Order Orchestration and Global Order Promising in cross-channel here.

  Read the article

• Wisdom Lies in Collaborative Power and Intelligence

  - by kellsey.ruppel

  By Alakh Verma, Director, Platform Technology Solutions   In my recent blog posts, I shared insights on Predictive Analytics (Will Predictive Analytics at 'Speed of Thoughts' Help Businesses?), Real Time Decisions (How critical are Real Time decisions in business today?) and their significance in our lives in general and in businesses today. In the current business paradigm shift- with evolutionary social business, it is paramount that businesses look for wisdom in collaborative power and intelligence and equip their employees with the tools to engage with one another. There is an old time saying that 5 sticks tied together are stronger and unable to break as opposed to an individual stick. We have recently witnessed the power of ordinary people uniting together and fought collaboratively using Facebook and Twitter to topple down dictators in Tunisia, Egypt and Libya—and are threatening absolute rule in Syria. And an India one man’s (Anna Hazare) campaign against corruption went viral, bringing thousands to the streets in support. As anyone who has worked in a sizeable organization knows, there is no guarantee that the organization as a whole will perform efficiently and achieve its goals, even if each employee is individually efficient and every team has a high level of productivity. To achieve enterprise productivity, it is necessary not only for individuals and groups to “do things right” by working productively but also for the enterprise as a whole to “do the right things” - form the right teams, make the right decisions, allocate resources correctly, and effectively coordinate activities across the entire organization. Most organizations fall short of the optimal level of enterprise productivity because of one or more of these reasons, all at a great cost to the business.  They are disconnected from themselves with various parts of the organization unintentionally working at cross-purposes with each other.  Information that exists is not getting shared or reused.  Human talent is not being applied where it is most needed.  The same problems are being solved repeatedly by multiple groups. Intelligent collaboration through automated business processes has the ability to alter the course of any important business activity, with a potentially dramatic impact on the financial performance of the business. Whether it is a simple email exchange, a physical or virtual meeting, a task force, or a large-scale project, the activity is inherently collaborative.  In fact, collaboration can be defined as the work that takes place among people when a business process is not pre-determining how the work should take place. Collaboration is many things: information sharing, brainstorming, problem solving, best practice negotiation, innovation, coordination of activity, alignment of purpose, and so forth.  Collaboration is the “white space” between the business processes; it is the glue that holds an organization together, and the lubricant that allows the machinery to keep running.  Real time search and collaborative capabilities of the right people with the right content supported by defined processes will provide unparallel wisdom in the organization in the most competitive business environment today. Interestingly, technologies such as Oracle WebCenter offer these capabilities in our Web based business transactions and compliment in the overall collaborative intelligence and power to truly transform organizations to social businesses. Looking to learn more about engaging your employees to collaborate together and providing a complete user experience for your customers? You won't want to miss our webcast today! Drive Online Engagement with Intuitive Portals and Websites

  Read the article

• Restrict number of characters to be typed for af:autoSuggestBehavior

  - by Arunkumar Ramamoorthy

  When using AutoSuggestBehavior for a UI Component, the auto suggest list is displayed as soon as the user starts typing in the field. In this article, we will find how to restrict the autosuggest list to be displayed till the user types in couple of characters. This would be more useful in the low latency networks and also the autosuggest list is bigger. We could display a static message to let the user know that they need to type in more characters to get a list for picking a value from. Final output we would expect is like the below image Lets see how we can implement this. Assuming we have an input text for the users to enter the country name and an autosuggest behavior is added to it. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior /> </af:inputText> Also, assuming we have a VO (we'll name it as CountryView for this example), with a view criteria to filter out the VO based on the bind variable passed. Now, we would generate View Impl class from the java node (including bind variables) and then expose the setter method of the bind variable to client interface. In the View layer, we would create a tree binding for the VO and the method binding for the setter method of the bind variable exposed above, in the pagedef file As we've already added an input text and an autosuggestbehavior for the test, we would not need to build the suggested items for the autosuggest list.Let us add a method in the backing bean to return us List of select items to be bound to the autosuggest list. padding: 5px; background-color: #fbfbfb; min-height: 40px; width: 544px; height: 168px; overflow: auto;"> public List onSuggest(String searchTerm) { ArrayList<SelectItem> selectItems = new ArrayList<SelectItem>(); if(searchTerm.length()>1) { //get access to the binding context and binding container at runtime BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry(); //set the bind variable value that is used to filter the View Object //query of the suggest list. The View Object instance has a View //Criteria assigned OperationBinding setVariable = (OperationBinding) bindings.get("setBind_CountryName"); setVariable.getParamsMap().put("value", searchTerm); setVariable.execute(); //the data in the suggest list is queried by a tree binding. JUCtrlHierBinding hierBinding = (JUCtrlHierBinding) bindings.get("CountryView1"); //re-query the list based on the new bind variable values hierBinding.executeQuery(); //The rangeSet, the list of queries entries, is of type //JUCtrlValueBndingRef. List<JUCtrlValueBindingRef> displayDataList = hierBinding.getRangeSet(); for (JUCtrlValueBindingRef displayData : displayDataList){ Row rw = displayData.getRow(); //populate the SelectItem list selectItems.add(new SelectItem( (String)rw.getAttribute("Name"), (String)rw.getAttribute("Name"))); } } else{ SelectItem a = new SelectItem("","Type in two or more characters..","",true); selectItems.add(a); } return selectItems; } So, what we are doing in the above method is, to check the length of the search term and if it is more than 1 (i.e 2 or more characters), the return the actual suggest list. Otherwise, create a read only select item new SelectItem("","Type in two or more characters..","",true); and add it to the list of suggested items to be displayed. The last parameter for the SelectItem (boolean) is to make it as readOnly, so that users would not be able to select this static message from the displayed list. Finally, bind this method to the input text's autosuggestbehavior's suggestedItems property. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior suggestedItems="#{AutoSuggestBean.onSuggest}"/> </af:inputText>

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Keeping an Eye on Your Storage

  - by Fatherjack

  There are plenty of resources that advise you about looking for signs that your storage hardware is having problems. SQL Server Alerts for 823, 824 and 825 are covered here by Paul Randall of SQL Skills: http://www.sqlskills.com/blogs/paul/a-little-known-sign-of-impending-doom-error-825/ and here by me: https://www.simple-talk.com/blogs/2011/06/27/alerts-are-good-arent-they/. Now until very recently I wasn’t aware that there was a different way to track the 823 + 824 errors. It was by complete chance that I happened to be searching about in the msdb database when I found the suspect_pages table. Running a query against it I got zero rows. This, as it turns out is a good thing. Highlighting the table name and pressing F1 got me nowhere – Is it just me or does Books Online fail to load properly for no obvious reason sometimes? So I typed the table name into the search bar and got my local version of http://msdn.microsoft.com/en-us/library/ms174425.aspx. From that we get the following description: Contains one row per page that failed with a minor 823 error or an 824 error. Pages are listed in this table because they are suspected of being bad, but they might actually be fine. When a suspect page is repaired, its status is updated in the event_type column. So, in the table we would, on healthy hardware, expect to see zero rows but on disks that are having problems the event_type column would show us what is going on. Where there are suspect pages on the disk the rows would have an event_type value of 1, 2 or 3, where those suspect pages have been restored, repaired or deallocated by DBCC then the value would be 4, 5 or 7. Having this table means that we can set up SQL Monitor to check the status of our hardware as we can create a custom metric based on the query below: USE [msdb] go SELECT COUNT(*) FROM [dbo].[suspect_pages] AS sp All we need to do is set the metric to collect this value and set an alert to email when the value is not 1 and we are then able to let SQL Monitor take care of our storage. Note that the suspect_pages table does not have any updates concerning Error 825 which the links at the top of the page cover in more detail. I would suggest that you set SQL Monitor to alert on the suspect_pages table in addition to other taking other measures to look after your storage hardware and not have it as your only precaution. Microsoft actually pass ownership and administration of the suspect_pages table over to the database administrator (Manage the suspect_pages Table (SQL Server)) and in a surprising move (to me at least) advise DBAs to actively update and archive data in it. The table will only ever contain a maximum of 1000 rows and once full, new rows will not be added. Keeping an eye on this table is pretty important, although In my opinion, if you get to 1000 rows in this table and are not already waiting for new disks to be added to your server you are doing something wrong but if you have 1000 rows in there then you need to move data out quickly because you may be missing some important events on your server.

  Read the article

• Cloud Apps News @#OOW12

  - by Natalia Rachelson

  All eyes were on Oracle this past week and the news cycle was in full swing. What better time to make some key announcements that were guaranteed to create buzz ... and so we did. The name of the game was Cloud! Here are the key Cloud announcements for Apps, which included Fusion Tap that enables mobility across all Cloud Apps, HCM customer momentum in the Cloud, and our very first ERP Cloud Services customer. Oracle Unveils Oracle Fusion Tap for the iPadOracle Fusion Tap - Productivity Amplified Anywhere, Anytime "Both the enterprise and technology providers must recognize the need to innovate and adapt for the increasing mobility of the workforce - not just for sales teams, but across the organization," said Carter Lusher, Research Fellow and Chief Analyst of Enterprise Applications Ecosystem, Ovum. "A mobile application that quickly and powerfully allows employees to make connections, analyze data, and complete activities at any time and wherever they may be located drives new levels of business value and enhances efficiency. Frankly, mobile access is no longer a 'nice to have' but a 'must have.'"  "The mobile workforce is a business reality, and Oracle Fusion Tap is an example of how Oracle delivers mobile and cloud innovations that fundamentally improve productivity and how we work," said Chris Leone, Senior Vice President of Application Development, Oracle. "With Oracle Fusion Tap users will have an all-in-one, easily extensible app that puts mission-critical data and colleague connection at their fingertips." The entire release is available here http://www.oracle.com/us/corporate/press/1855392 Customers Live on Oracle Fusion Human Capital ManagementOracle HCM Cloud Service Helps Power HR's Contribution to the Business "More than 25 of the 100-plus customers who have selected Oracle Fusion Human Capital Management (HCM) are already live. Ardent Leisure, Peach Aviation, Toshiba Medical Systems and Zillow have deployed Oracle HCM Cloud Service and are using it to transform their HR operations. They join companies such as Principal Financial Group and Elizabeth Arden, who are already using Oracle HCM Cloud Service to help manage international growth and deliver pervasive, role-based, configurable solutions to their employees. With these recent go-lives, Oracle takes a leading position in successfully bringing live HCM customers in the cloud."  "As a technology company, Zillow looked to a partner who could scale with us. Zillow has gone live on Oracle HCM Cloud Service, which will give us the ability automate and streamline HR operations for our employees in the near future," said Sarah Bilton, Senior Director HR, Zillow. Read the entire release here http://www.oracle.com/us/corporate/press/1859573 Lending Club Selects Oracle ERP Cloud Service to Help Increase Insight and EfficienciesOracle ERP Cloud Service Provides an Open Architecture, Best-of-Breed Decision-Making, and Scalability in the Cloud "Lending Club, the leading platform for investing in and obtaining personal loans, has selected Oracle ERP Cloud Service to help improve decision-making and workflow, implement robust reporting, and take advantage of the inherent scalability and cost savings provided by the cloud. With more than 76,000 borrowers and 90,000 investors Lending Club utilizes technology and innovation to reduce the cost of traditional banking and offer borrowers better rates and investors better returns.  After an extensive search, Lending Club selected Oracle ERP Cloud Service due to the breadth and depth of capabilities and ongoing innovation of Oracle ERP Cloud Service, as well as Oracle's open architecture, industry leadership and commitment to partners." "Lending Club is an innovative, data-intensive, high-growth company and we needed a solution and partner that could match us," said Carrie Dolan, CFO, Lending Club. "We conducted a thorough review of our options, and Oracle ERP Cloud Service was the clear winner in terms of capabilities and business value as well as commitment to us as a customer." Read the entire release here http://www.oracle.com/us/corporate/press/1859020

  Read the article

• Building a personal website using Silverlight.

  - by mbcrump

  I’ve always believed that as a developer you should always have a hobby project going on. I think a hobby project needs to contain at least one of following things: Something that you have never done before. Something that you are interested in. Something that you can work on in your spare time without affecting your *paying* job. I decided my hobby project would be an entire web application written in Silverlight that could be used as a self-promotion/marketing tool. This goal of the site is to provide information on the work that I’ve done to conferences, future employers and anyone else that wanted to learn more about me. Before I go any further, if you just want to check out the site then it is located at http://michaelcrump.info. So, what did I use to create it? MVVM Light – I’m a big fan of this software. The item and project templates plus code snippets make this a huge win for any SL/WPF/WP7 application. Jetpack Theme by Microsoft – I suck at designing so I used this template to help speed up this project. ComponentOne 3rd Party Controls – I have a license and really like several of their products. A User Control that Jeremy Likness created called DynamicXaml (used with his permission). I had created my own version of this a while back, but Jeremy’s implementation was simply better. Main Page – Designed to create my “brand”. This was built for a quick glimpse of who I am and what do I do.  Blog – The best marketing tool for a developer is their blog. I decided to go with an HTML page displaying my site and the user could pop into full-screen if desired. I also included my feed and Silverlight-Zone. (Another site I work on) Online – This page links to sites that I have been featured on as well as community involvement and awards. I also have a web service that I can update this information without re-compiling the Silverlight App. Projects – I’ve been wanting to use a CoverFlow for a really long time now. =) This page list several hobby projects as well as a few professional projects.  Resume Page – This page only exist because I got tired of sending companies my resume in e-mail. I can now provide a deep link to this page and the recruiter can print, search or save my resume. The PDF of my resume exist in a folder that I can easily update without recompiling the app. Contact Page – Just a contact page with a web service that sends the email. The Send button becomes disabled after a successful send. I thought of adding captcha to this page but in the end didn’t think it was worth it. Looking back at this app, I’m happy with how it turned out. I love Silverlight and I am already thinking of my next hobby project. (Thinking another Windows Phone 7 app or MVC3).  Subscribe to my feed

  Read the article

• Expanding on requestaudit - Tracing who is doing what...and for how long

  - by Kyle Hatlestad

  One of the most helpful tracing sections in WebCenter Content (and one that is on by default) is the requestaudit tracing.  This tracing section summarizes the top service requests happening in the server along with how they are performing.  By default, it has 2 different rotations.  One happens every 2 minutes (listing up to 5 services) and another happens every 60 minutes (listing up to 20 services).  These traces provide the total time for all the requests against that service along with the number of requests and its average request time.  This information can provide a good start in possibly troubleshooting performance issues or tracking a particular issue.   >requestaudit/6 12.10 16:48:00.493 Audit Request Monitor !csMonitorTotalRequests,47,1,0.39009329676628113,0.21034042537212372,1>requestaudit/6 12.10 16:48:00.509 Audit Request Monitor Request Audit Report over the last 120 Seconds for server wcc-base_4444****requestaudit/6 12.10 16:48:00.509 Audit Request Monitor -Num Requests 47 Errors 1 Reqs/sec. 0.39009329676628113 Avg. Latency (secs) 0.21034042537212372 Max Thread Count 1requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 1 Service FLD_BROWSE Total Elapsed Time (secs) 3.5320000648498535 Num requests 10 Num errors 0 Avg. Latency (secs) 0.3531999886035919 requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 2 Service GET_SEARCH_RESULTS Total Elapsed Time (secs) 2.694999933242798 Num requests 6 Num errors 0 Avg. Latency (secs) 0.4491666555404663requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 3 Service GET_DOC_PAGE Total Elapsed Time (secs) 1.8839999437332153 Num requests 5 Num errors 1 Avg. Latency (secs) 0.376800000667572requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 4 Service DOC_INFO Total Elapsed Time (secs) 0.4620000123977661 Num requests 3 Num errors 0 Avg. Latency (secs) 0.15399999916553497requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 5 Service GET_PERSONALIZED_JAVASCRIPT Total Elapsed Time (secs) 0.4099999964237213 Num requests 8 Num errors 0 Avg. Latency (secs) 0.051249999552965164requestaudit/6 12.10 16:48:00.509 Audit Request Monitor ****End Audit Report***** To change the default rotation or size of output, these can be set as configuration variables for the server: RequestAuditIntervalSeconds1 – Used for the shorter of the two summary intervals (default is 120 seconds)RequestAuditIntervalSeconds2 – Used for the longer of the two summary intervals (default is 3600 seconds)RequestAuditListDepth1 – Number of services listed for the first request audit summary interval (default is 5)RequestAuditListDepth2 – Number of services listed for the second request audit summary interval (default is 20) If you want to get more granular, you can enable 'Full Verbose Tracing' from the System Audit Information page and now you will get an audit entry for each and every service request.  >requestaudit/6 12.10 16:58:35.431 IdcServer-68 GET_USER_INFO [dUser=bob][StatusMessage=You are logged in as 'bob'.] 0.08765099942684174(secs) What's nice is it reports who executed the service and how long that particular request took.  In some cases, depending on the service, additional information will be added to the tracing relevant to that  service. >requestaudit/6 12.10 17:00:44.727 IdcServer-81 GET_SEARCH_RESULTS [dUser=bob][QueryText=%28+dDocType+%3cmatches%3e+%60Document%60+%29][StatusCode=0][StatusMessage=Success] 0.4696030020713806(secs) You can even go into more detail and insert any additional data into the tracing.  You simply need to add this configuration variable with a comma separated list of variables from local data to insert. RequestAuditAdditionalVerboseFieldsList=TotalRows,path In this case, for any search results, the number of items the user found is traced: >requestaudit/6 12.10 17:15:28.665 IdcServer-36 GET_SEARCH_RESULTS [TotalRows=224][dUser=bob][QueryText=%28+dDocType+%3cmatches%3e+%60Application%60+%29][Sta... I also recently ran into the case where services were being called from a client through RIDC.  All of the services were being executed as the same user, but they wanted to correlate the requests coming from the client to the ones being executed on the server.  So what we did was add a new field to the request audit list: RequestAuditAdditionalVerboseFieldsList=ClientToken And then in the RIDC client, ClientToken was added to the binder along with a unique value that could be traced for that request.  Now they had a way of tracing on both ends and identifying exactly which client request resulted in which request on the server.

  Read the article

• How views are changing in future versions of SQL

  - by Rob Farley

  April is here, and this weekend, SQL v11.0 (previous known as Denali, now known as SQL Server 2012) reaches general availability. And so I thought I’d share some news about what’s coming next. I didn’t hear this at the MVP Summit earlier this year (where there was lots of NDA information given, but I didn’t go), so I think I’m free to share it. I’ve written before about CTEs being query-scoped views. Well, the actual story goes a bit further, and will continue to develop in future versions. A CTE is a like a “temporary temporary view”, scoped to a single query. Due to globally-scoped temporary objects using a two-hashes naming style, and session-scoped (or ‘local’) temporary objects a one-hash naming style, this query-scoped temporary object uses a cunning zero-hash naming style. We see this implied in Books Online in the CREATE TABLE page, but as we know, temporary views are not yet supported in the SQL Server. However, in a breakaway from ANSI-SQL, Microsoft is moving towards consistency with their naming. We know that a CTE is a “common table expression” – this is proving to be a more strategic than you may have appreciated. Within the Microsoft product group, the term “Table Expression” is far more widely used than just CTEs. Anything that can be used in a FROM clause is referred to as a Table Expression, so long as it doesn’t actually store data (which would make it a Table, rather than a Table Expression). You can see this is not just restricted to the product group by doing an internet search for how the term is used without ‘common’. In the past, Books Online has referred to a view as a “virtual table” (but notice that there is no SQL 2012 version of this page). However, it was generally decided that “virtual table” was a poor name because it wasn’t completely accurate, and it’s typically accepted that virtualisation and SQL is frowned upon. That page I linked to says “or stored query”, which is slightly better, but when the SQL 2012 version of that page is actually published, the line will be changed to read: “A view is a stored table expression (STE)”. This change will be the first of many. During the SQL 2012 R2 release, the keyword VIEW will become deprecated (this will be SQL v11 SP1.5). Three versions later, in SQL 14.5, you will need to be in compatibility mode 140 to allow “CREATE VIEW” to work. Also consistent with Microsoft’s deprecation policy, the execution of any query that refers to an object created as a view (rather than the new “CREATE STE”), will cause a Deprecation Event to fire. This will all be in preparation for the introduction of Single-Column Table Expressions (to be introduced in SQL 17.3 SP6) which will finally shut up those people waiting for a decent implementation of Inline Scalar Functions. And of course, CTEs are “Common” because the Table Expression definition needs to be repeated over and over throughout a stored procedure. ...or so I think I heard at some point. Oh, and congratulations to all the new MVPs on this April 1st. @rob_farley

  Read the article

• Did I lose my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

  Read the article

• What is the difference between Workcenters, Dashboards, and the Interaction Hub?

  - by Matthew Haavisto

  Oracle Open World has just concluded.  Over the course of the conference, we presented several sessions covering different aspects of the PeopleSoft user experience, including Workcenters, Dashboards, and the PeopleSoft Interaction Hub (formerly known as the PeopleSoft Applications Portal).  Although we've produced collateral on these features and covered them in sessions, it became apparent at the conference that customers still have many questions about the these products, including how they are licensed, how they are installed, what their various purposes are, and how they can be used together synergistically. Let's Start with Licensing and Installation As you may know, we've extended the restricted use license (RUL) for the Interaction Hub.  This grants customers with PeopleTools 8.52 licenses the right to install the Interaction Hub for free for use as specified in the Tools license notes.  Note that this means customers receive a restricted use license for the Interaction Hub that doesn't cost them an additional license fee, but it is a separate product, not part of PeopleTools or PeopleSoft applications, and is a separate installation.  This means customers must provide the infrastructure to install and run the Hub, just like any other application.  The benefits of using the Hub to unify your PeopleSoft user experience can be great.  PeopleSoft applications have not yet delivered instances of the Hub with their products, though they may in the future. Workcenters and Dashboards, on the other hand, are frameworks provided by PeopleTools.  No other license is required, and no additional installation of a separate product is needed (apart from PeopleTools and PeopleSoft applications).  PeopleSoft applications are delivering instances of the workcenters and dashboards with their products.  Some are available now, and more are coming in future releases.  These delivered workcenter and dashboard instances require no additional licenses, and no additional installations beyond Tools and the applications that provide them.  In addition, the workcenter and dashboard frameworks provided by PeopleTools can be used by customers to build their own workcenters and dashboards, and it's quite easy and simple to do so. What are Their Differences?  What Purposes do they Serve? Workcenters, Dashboards and the Interaction Hub appear somewhat similar.  They all contain pagelets, and have some visual characteristics in common.  However, their strengths and purposes are very different, and they were designed to provide different benefits to your PeopleSoft ecosystem. Workcenters and Dashboards have the following characteristics: Designed for specific roles Focus on the daily tasks of those roles Help to streamline the work performed most often Personal view of my work world Makes navigation and search easier and quicker, particularly for transactions and decision support Reports and data needed for day-to-day work Personalizable, but minimal Delivered by PS Apps, but can be altered by customer for their requirements Customers can create their own Workcenters can be used for guided processes  The Interaction Hub is designed to aggregate content from multiple applications, and is is used to unify the user experience of those applications.  It offers a rich, web site-based user experience, and is often used to provide access to infrequently performed activities like benefits enrollment, payroll inquiries, life event changes, onboarding, and so on. Full-featured and robust Centrally administered Pushed to large audience Broad info like Company News Infrequent activities like benefits, not day-to-day tasks Self-service, access to employer info Central launch point for other activities and can navigate to workcenters and dashboards Deployed by customers or consultants, instances not delivered by PeopleSoft (at this time) Content management Unified PS application navigation Although these products are quite different and serve different purposes in your PeopleSoft environment, they can be used together to provide a richer, more efficient and engaging user experience for your all your user communities.

  Read the article

• October in Review

  - by Richard Bingham

  With OpenWorld over October was time to get back to serious work for everyone, including the Fusion Applications Developer Relations team. Don't forget the OpenWorld content is still available, including presentation downloads, for a limited period of time so be sure to grab anything you found useful or take another scan for anything you might have missed. Of all the announcements, the continued evolution of the Oracle Cloud services for extending and integrating with Fusion Applications is increasing in popularity, and certainly the Cloud Marketplace is something we're becoming involved in. More details to follow. Fusion Concepts Last week Vik from our team started the new "Fusion Concepts" series of articles, providing those new to Fusion Applications an explanation of the architectural basics, with the aim to reduce the learning curve and lay the platform for more efficient and effective development. The series begun with an insightful first post on the different schemas that exist in the Fusion Applications database. Look out for upcoming posts on multi-lingual entities, profile options, look-ups and more. New Learning Resources Our YouTube channel continued to expand with more 'how to' videos on using page composer, extending the Simplified UI (aka FUSE), and integrating BI reports and analytics. Also the Oracle Learning Library is now well established as a central resource for knowledge, now with thousands of tutorials, videos, and documents. Of particular note are the great new extensibility-related videos added by the CRM Product Management team, including more on the ever-expanding capabilities of Application Composer. To see some examples of these search using keyword 'customization' or the product 'Sales Cloud'. Finally on learning resources, as Oliver mentioned the Oracle Press book on Fusion Application Customization and Extensibility is now available for pre-order on Amazon (due out 1st Jan). Out And About October also saw us attend the annual Apps Conference held by the UK Oracle User Group in London. Interestingly there was an Applications Transformation stream of sessions and content that included Fusion Applications with all the latest in the Oracle Applications evolution, as always focused around the three tenets of social, mobile, and cloud. Read more in Richard's post-event write up. Other teams around Oracle have also been busy. Angelo from the Platform Technical Services group has done quite a bit of work using web services with Fusion SaaS and has published many interesting findings on his blog. It's definitely recommended reading if you are working on any related integration projects. The middleware-for-applications group has built a new tool called "AppAdvantage" offering an online assessment of your use of Fusion Middleware technologies with Oracle Applications. As the popularity of integrating cloud applications with on-premises systems continued to grow, leveraging existing middleware technologies (and licenses) to support the integration solution is likely to be of paramount importance. Similarly the "Build Enterprise Application Extensions with Ease" section of the related webpage has AppsUX director Killan Evers speaking about customization using the composer tools. Both are useful resources for those just getting started with a move to Fusion Applications. The Oracle A-Team, specialists in middleware technical architecture, always publish superb content via their 'chronicles' site, now with a substantial amount specifically related to Fusion Applications. Click on the Fusion Applications menu on the top right of their homepage to see more. Last month of particular note was an article on customizing the timeout pop-up message that shows to inactive users, providing design-time insight and easy-to-follow steps. Finally if you're looking at using Oracle Middleware and Cloud to tailor and extend your applications then you may also be interested in this new blog post on the roadmap for Oracle SOA and the latest on-demand Cloud Development webcast.

  Read the article

• BizTalk: Suspend shape and Convoy

  - by Leonid Ganeline

  Part 1: BizTalk: Instance Subscription and Convoys: Details This is a Part 2. I am discussing the Suspend shape together with Convoys and going to show that using them together is undesirable. In previous article we investigated the Instance Subscriptions and how they could create situation with dangerous zones in processing.  Let' start with Suspend shape. [See the BizTalk Help] "You can use the Suspend shape to make an orchestration instance stop running until an administrator explicitly intervenes, perhaps to reflect an error condition that requires attention beyond the scope of the orchestration. All of the state information for the orchestration instance is saved, and will be reinstated when the administrator resumes the orchestration instance. When an orchestration instance is suspended, an error is raised. You can specify a message string to accompany the error to help the administrator diagnose the situation."   On the Suspend shape the orchestration is stopped in the Suspended (Resumable) state. Next we have two choices, one is to resume and the second is to terminate the orchestration. Is the orchestration is stopped or unenlisted? You don't find a note about it anywhere. The fact is the Orchestration is stopped and still enlisted. It is very important. So again, the suspended orchestration can be resumed or terminated. The moment when the operator or the operation script resumes or terminates can be far away. It is also important too. Let's go back to the case from previous article. Make sure you notice the convoy and the dangerous zone after the last Receive shape.     Now we have a Suspend shape inside the orchestration. The first orchestration instance is suspended. Next messages start new orchestration instance and have been consumed by this orchestration, right? Wrong! The orchestration is stopped on the Suspend shape but still enlisted. Now the dangerous zone, the "zombie zone" is expanded to the interval between the last receive and the moment of termination or end of the orchestration. The new orchestration instance for this convoy will not start till this moment. How fast operator finds out this suspended orchestration? Maybe hours or days. All this time orchestration is still enlisted and gathering the convoy messages. We can resume the orchestration but we cannot resume these messages together with orchestration. Seems the name Suspended of the orchestration is misleading. The orchestration can be in the Started (and Enlisted)/Stopped (and Enlisted)/Unenlisted state. The Suspend shape switches orchestration exactly to the Stopped state. The Stop name would describe the shape clearly and unambiguously and the Stopped state would describe the orchestration. Imagine we can change the BizTalk. The Orchestration editor can search these situations and returns the compile error. In similar case the Orchestration Editor forces us to use only ordered delivery port with convoys. The run-time core can force the orchestration with convoy be suspended in Unresumable state, that means the run-time unenlists the orchestration instance subscriptions. The Suspend shape name should be changed. The "Suspend" name is misleading. The "Stop" name is clear and unambiguous. The same for the orchestration state, it should be “Stopped” not “Suspended (Resumable)”.   Conclusion:  It is not recommended using a Suspend shape together with the convoy orchestrations.

  Read the article

• EPM troubleshooting Utilities

  - by THE

  (in via Maurice) "Are you keeping up-to-date with the latest troubleshooting utilities introduced from EPM 11.1.2.2? These are typically not described in product documentation, so you might miss references to them. The following five utilities may be run from the command line.(1) Deployment Report was introduced with EPM 11.1.2.2 (11 April 2012). It details logical web addresses, web servers, application ports, database connections, user directories, database repositories configured for the EPM system, data directories used by EPM system products, instance directories, FMW homes, deployment distory, et cetera. It also helps to keep you honest about whether you made changes to the system and at what times! Download Shared Services patch 13530721 to get the backported functionality in EPM 11.1.2.1. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/epmsys_registry.sh report deployment (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\epmsys_registry.bat report deployment (on Microsoft Windows). The output is saved under \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\deployment_report.html (2) Log Analysis has received more "press". It was released with EPM 11.1.2.3 and helps the user to slice and dice EPM logs. It has many parameters which are documented when run without parameters, when run with the -h parameter, or in the 'Readme' file. It has also been released as a standalone utility for EPM 11.1.2.3 and earlier versions. (Sign in to  My Oracle Support, click the 'Patches & Updates' tab, enter the patch number 17425397, and click the Search button. Download the appropriate platform-specific zip file, unzip, and read the 'Readme' file. Note that you must provide a proper value to a JAVA_HOME environment variable [pointer to the mother directory of the Java /bin subdirectory] in the loganalysis.bat | .sh file and use the -d parameter when running standalone.) Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/loganalysis.sh -h (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\loganalysis.bat -h (on Microsoft Windows). The output is saved under the \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\ subdirectory. (3) The Registry Cleanup command may be used (without fear!) to clean up various corruptions which can  affect the Hyperion (database-based) Repository. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/registry-cleanup.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\registry-cleanup.bat (on Microsoft Windows). The actions are described on the command line. (4) The Remove Instance Command is only used if there are two or more instances configured on one computer and one of those should be deleted. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/remove-instance.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\remove-instance.bat (on Microsoft Windows). (5) The Reset Configuration Tool was introduced with EPM 11.1.2.2. It nullifies Shared Services Hyperion Registry settings so that a service may be reconfigured. You may locate the values to substitute for <product> or <task> by scanning registry.html (generated by running epmsys_registry.bat | .sh). Find productNAME in INSTANCE_TASKS_CONFIGURATION and SYSTEM_TASKS_CONFIGURATION nodes and identify tasks by property pairs that have values of 'Configurated' or 'Pending'. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/resetConfigTask.sh -product <product> -task <task> (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\resetConfigTask.bat -product <product> -task <task> (on Microsoft Windows). "Thanks to Maurice for this collection of utilities.

  Read the article

• Microsoft Build 2012 Day 1 Keynote Summary

  - by Tim Murphy

  So I have finally dried the tears after watching the Keynote for Build 2012.  This wasn’t because it was an emotional presentation, but because for the second year I missed the goodies.  Each on site attendee got a Surface RT, a Lumia 920 and a voucher for 100GB of SkyDrive storage. The event was opened with the announcement that in the three days since the launch of Windows 8 over 4 million upgrades have been sold.  I don’t care who you are that is an impressive stat.  Ballmer then spent a fair amount of time remaking the case for the Windows and Windows Phone platforms similar to what we have heard over the last to launch events. There were some cool, but non-essential demos.  The one that was the most fun was the Perceptive Pixel 82” slate device.  At first glance I wondered why I would ever want such a device, but then Ballmer explained it’s possible use for schools and boardrooms.  The actually made sense. Then things got strange.  Steve started explaining features that developers could leverage.  Usually this type of information is left to the product leads.  He focused on the integration with the Charms features such as Search and Share. Steve “Guggs” Guggenheim showed off an app that would appeal to my kids from Disney called “Agent P” which is base on Phineas and Ferb.  Then he got to the meat of the presentation.  We found out that you could add a tile that can be used to sell ad space.  In the same vein we also found out that you could use Microsoft’s, Paypal’s or any commerce engine of your own creation or choosing. For those who are interested in sports and especially developing sports apps you would have found the small presentation from Michael Bayle of ESPN.  He introduced the ESPN app which has tons of features.  For the developers in the crowd he also mentioned that ESPN has an API available at developer.espn.com. During the launch events we were told apps were coming.  In this presentation we were actually shown a scrolling list of logos and told about a couple of them.  Ballmer mentioned specifically Twitter, SAP and DropBox.  These are impressive names that were just a couple of the list impressive names. Steve Ballmer addressed the question of why you should develop for the Windows 8 platform.  He feels that Microsoft has the best commercial terms for developers, a better way to build apps than other platforms and a variety of form factors.  His key point though was the available volume of customers given the current Windows install base and assuming even a flat growth of the platform.  This he backed with a promise that Microsoft is going to do better at marketing and you won’t be able to avoid the ads that they are bringing out. The last section of the key note was present by Kevin Gallo from the Windows Phone team.  This was the real reason I tuned into the webcast.  He impressed upon those watching that the strength of developing for the Microsoft platform is the common programming model that now exist.  While there are difference between form factor implementations you can leverage code across them. He claimed that 90% of developer requests for Windows Phone 8 had been implemented.  These include: More controls with better performance Better live tiles including lock screen integration Speech support in custom apps Easier submission to the market place App camera integration VOIP and chat support Bluetooth and NFC support Native C++ development Direct 3D development   The quote from Kevin that stood out for me was that “Take your Dramamine and buckle your seatbelt type of games are coming to Windows Phone 8”.  He back this up by displaying a list of game development frameworks and then having Unity come out and do a demo. Ok, almost done … The last two things of note for me were the announcement that the SDK is immediately available at dev.windowsphone.com and that they were reducing the cost of an individual developer account to $8 for the next 8 days. Let the development commence. del.icio.us Tags: Build 2012,Windows 8,Windows Phone 8,Windows Phone

  Read the article

• SQL SERVER – Last Two Days to Get FREE Book – Joes 2 Pros Certification 70-433

  - by pinaldave

  Earlier this week we announced that we will be giving away FREE SQL Wait Stats book to everybody who will get SQL Server Joes 2 Pros Combo Kit. We had a fantastic response to the contest. We got an overwhelming response to the offer. We knew there would be a great response but we want to honestly say thank you to all of you for making it happen. Rick and I want to make sure that we express our special thanks to all of you who are reading our books. The offer is still on and there are two more days to avail this offer. We want to make sure that everybody who buys our most selling combo kits, we will send our other most popular SQL Wait Stats book. Please read all the details of the offer here. The books are great resources for anyone who wants to learn SQL Server from fundamentals and eventually go on the certification path of 70-433. Exam 70-433 contains following important subject and the book covers the subject of fundamental. If you are taking the exam or not taking the exam – this book is for every SQL Developer to learn the subject from fundamentals.  Create and alter tables. Create and alter views. Create and alter indexes. Create and modify constraints. Implement data types. Implement partitioning solutions. Create and alter stored procedures. Create and alter user-defined functions (UDFs). Create and alter DML triggers. Create and alter DDL triggers. Create and deploy CLR-based objects. Implement error handling. Manage transactions. Query data by using SELECT statements. Modify data by using INSERT, UPDATE, and DELETE statements. Return data by using the OUTPUT clause. Modify data by using MERGE statements. Implement aggregate queries. Combine datasets. INTERSECT, EXCEPT Implement subqueries. Implement CTE (common table expression) queries. Apply ranking functions. Control execution plans. Manage international considerations. Integrate Database Mail. Implement full-text search. Implement scripts by using Windows PowerShell and SQL Server Management Objects (SMOs). Implement Service Broker solutions. Track data changes. Data capture Retrieve relational data as XML. Transform XML data into relational data. Manage XML data. Capture execution plans. Collect output from the Database Engine Tuning Advisor. Collect information from system metadata. Availability of Book USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Friday Tips #3

  - by Chris Kawalek

  Even though yesterday was Thanksgiving here in the US, we still have a Friday tip for those of you around your computers today. In fact, we have two! The first one came in last week via our #AskOracleVirtualization Twitter hashtag. The tweet has disappeared into the ether now, but we remember the gist, so here it is: Question: Will there be an Oracle Virtual Desktop Client for Android? Answer by our desktop virtualization product development team: We are looking at Android as a supported platform for future releases. Question: How can I make a Sun Ray Client automatically connect to a virtual machine? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Someone recently asked how they can assign VM’s to specific Sun Ray Desktop Units (“DTU’s”) without any user interfaction being required, without the “Desktop Selector” being displayed, or any User Directory.  That is, they wanted each Sun Ray to power on and immediately connect to a pre-assigned Solaris VM.   This can be achieved by using “tokens” for user assignment – that is, the tokens found on Smart Cards, DTU’s, or OVDC clients can be used in place of user credentials.  Note, however, that mixing “token-only” assignments and “User Directories” in the same VDI Center won’t work.   Much of this procedure is covered in the documentation, particularly here. But it can useful to have everything in one place, “cookbook-style”:  1. Create the “token-only” directory type: From the VDI administration interface, select:  “Settings”, “Company”, “New”, select the “None” radio button, and click “Next.” Enter a name for the new “Company”, and click “Next”, then “Finish.” 2. Create Desktop Providers, Pools, and VM’s as appropriate. 3. Access the Sun Ray administration interface at http://servername:1660 and login using “root” credentials, and access the token-id’s you wish to use for assignment.  If you’re using DTU tokens rather than Smart Card tokens, these can be found under the “Tokens” tab, and “Search-ing” using the “Currently Used Tokens” tab.  DTU’s can be identified by the prefix “psuedo.”   For example: 4. Copy/paste this token into the VDI administrative interface, by selecting “Users”, “New”, and pasting in the token ID, and click “OK” - for example: 5. Assign the token (DTU) to a desktop, that is, in the VDI Admin Gui, select “Pool”, “Desktop”, select the VM, and click "Assign" and select the token you want, for example: In addition to assigning tokens to desktops, you'll need to bypass the login screen.  To do this, you need to do two things:  1.  Disable VDI client authentication with:  /opt/SUNWvda/sbin/vda settings-setprops -p clientauthentication=Disabled 2. Disable the VDI login screen – to do this,  add a kiosk argument of "-n" to the Sun Ray kiosk arguments screen.   You set this on the Sun Ray administration page - "Advanced", "Kiosk Mode", "Edit", and add the “-n” option to the arguments screen, for example: 3.  Restart both the Sun Ray and VDI services: # /opt/SUNWut/sbin/utstart –c # /opt/SUNWvda/sbin/vda-service restart Remember, if you have a question for us, please post on Twitter with our hashtag (again, it's #AskOracleVirtualization), and we'll try to answer it if we can. See you next time!

  Read the article

• On The Road with the HR Community

  - by Kathryn Perry

  A guest post by Steve Boese, Director, Talent Strategy, Oracle One of the best ways to connect with and to get a feel for what is on the minds of Human Resources leaders is to get out of the office and hit the road. I’ve had the great honor to attend and/or present at a number of events recently, including the massive SHRM Annual Conference, the HR Florida Conference, and Taleo World in Chicago. These events, and many others, offer solution providers, talent management professionals, business leaders, and even more casual observers of the Human Resources field with tremendous opportunities to connect, to share information, and to learn from each other. Attending the conferences also give people a sense of how they can improve and enhance their skills and knowledge, learn about the latest workforce technologies, and bring new and innovative ideas back to their organizations. And sure, the parties and conference swag can be pretty nice as well! If you attend a few of these industry events, one of the most beneficial by-products that you can emerge with -- whether you are on the front lines in HR at your organization, or as we are at Oracle, in the business of developing and delivering innovative and impactful technology solutions to our customers -- is to get a larger sense of the big ideas and major trends, concerns, and challenges facing organizations all across the landscape, and to be able to better understand how your strategies and solutions can be improved with this greater perspective. So what are HR folks discussing and debating? What questions and problems keep them up at night? What are the bloggers and large community of HR social media enthusiasts buzzing about? From my perspective some of the common themes you see over and again across the HR community break down (broadly), into three main areas: Talent attraction - How can we locate, attract, recruit, and hire the best talent possible? What new strategies, approaches, and technologies can help us in this critically important area? What role do external social networks like LinkedIn, Facebook, and Twitter play in the increasingly competitive search for talent? Talent Retention - How can we make sure to keep that talent on our team? What engagement, development, recognition, and compensation tools can help us in this regard? How can we continue, (or become), an employer of choice? What is our unique and compelling employer value proposition? Talent Empowerment - How can we put our employees in the best position to succeed? What can we do to better align our talent with the organization’s mission and goals, while simultaneously providing the best and most driven to succeed individuals a clear path to achieve their career goals and aspirations? How can new technologies, particularly social and collaboration tools help in this area? While these are the ‘big themes’ that I know I have seen this year, certainly they are not really new, nor are they likely to fundamentally change in the next year or two. I think the reason is that at the core of any successful enterprise is a collection of smart, interested, engaged, challenged, and empowered group of people. And that was likely the case 10 or 20 years ago, and will probably be the case 10 or 20 years into the future. But what has changed, and what you can see -- evidenced by simply following the Twitter backchannel for an event and by reading some of the many fantastic HR blogs out there -- is that the HR professional's ability, along with technology solution providers like Oracle, to connect, to more openly share information with each other, and to make each other better in the process, (and to create new, improved, and more innovative solutions), has never been greater. And I think it is with this heretofore unprecedented level of opportunity to connect with other members of the community that HR professionals will be better equipped to help their organizations attract, retain, and empower their teams. We at Oracle HCM look forward to continuing to meet, engage, and connect with the HR community in the coming months. Until then -- follow us on Twitter and Facebook.

  Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >