Search Results

Search found 36698 results on 1468 pages for 'old linux fan'.

Page 632/1468 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

• OFM 11g: Implementing OAM SSO with Forms

  - by olaf.heimburger

  There is some confusion about the integration of OFM 11g Forms with Oracle Access Manager 11g (OAM). Some say this does not work, some say it works, but.... Actually, having implemented it many times I belong to the later group. Here is how. Caveat Before you start installing anything, take a step back and consider your current implementation and what you really need and want to achieve. The current integration of Forms 11g with OAM 11g does not support self-service account creation and password resets from the Forms application. If you really need this, you must use the existing Oracle AS 10.1.4.3 infrastructure. On the other hand, if your user population is pretty stable, you can enjoy the latest Forms 11g with OAM 11g. Assumptions The whole process should be done in one day. I assume that all domains and instances are started during setup, if you need to restart them on demand or purpose, be sure to have proper start/stop scripts, I don't mention them. Preparation It goes without saying, that you always should do a proper backup before you change anything on your production environment. With proper backup, I also mean a tested and verified restore process. If you dared to test it before, do it now. It pays off. Requirements For OAM 11g to work properly you need a LDAP repository. For the integration of Forms 11g you need an Oracle Internet Directory (OID) configured with the Oracle AS SSO LDAP extensions. For better support I usually give the latest version a try, in this case OID 11g is a good choice.During the Installation and Integration steps we use an upgrade wizard that needs the old OID configuration on the same host but in a different ORACLE_HOME. Installation vs Configuration With OFM 11g Oracle introduced a clear separation between Installation of the binaries (the software) and the Configuration of the instances (the runtime). This is really great as you can install all the software and create new instances when needed. In the following we adhere to this scheme and install the software first and then configure the instances later. Installation Steps The Oracle documentation contains all the necessary steps for the installation of all pieces of software. But some hints help to avoid traps and pitfalls. Step 1 The Database Start the installation with the database. It is quite obvious but we need an Oracle database for all the other steps. If you have one at hand, fine. If not, just install at least a Oracle 10.2.0.4 version. This database can be on a different host. Step 2 The Repository Creation Utility The next step should be to run the Repository Creation Utility (RCU). This is a client application that just needs to connect to your database. It can be run on any host that can reach the database and is a Windows or Linux 32-bit machine. When you run it, be sure to install the OID schema and the OAM schema. If you miss one of these, you can run the RCU again to install the missing schema. Step 3 The Foundation With OFM 11g Oracle started to use WebLogic Server 11g (WLS) as its foundation for all OFM 11g installation. We therefore install it first. Depending on your operating system, it might be possible, that no native installer is available. My approach to this dilemma is to use the WLS Generic Installer for all my installations. It does not include a JDK either but if you have both for your platform you are ready to go. Step 3a The JDK To make things interesting, Oracle currently has two JDKs in its portfolio. The Sun JDK and the JRockit JDK. Both are available for a number of platforms. If you are lucky and both are available for your platform, install both in a separate directory (and not one of your ORACLE_HOMEs) each, You can use the later as you like. Step 3b Install WLS for OID and OAM With the JDK installed, we start the generic installer with java -jar wls_generic.jar.STOP! Before you do this, check the version first. It should be 1.6.0_18 or later and not the GCC one (Some Linux distros have it installed by default). To verify the version, issue a java -version command and make sure that the output does not contain the text gcj and the version matches. If this does not work, use an absolute path like /opt/java/jdk1.6.0_23/bin/java to start the installer. The installer allows you to specify a path to install the software into, say /opt/oracle/iam/11.1.1.3 for the OID and OAM installation. We will call this IAM_HOME. Step 4 Install OID Now we are ready to install OID. Start the OID installer (in the Disk1 directory) and just select the installation only step. This will install the software only and does not configure the instance. Use the IAM_HOME as the target directory. Step 5 Install SOA Suite The IAM 11g Suite uses the BPEL component of the SOA Suite 11g for its workflows. This is a pretty closed environment and not to be used for SCA Composites. We install the SOA Suite in $IAM_HOME/soa. The installer only installs the binaries. Configuration will be done later. Step 6 Install OAM Once the installation of OID and SOA is done, we are ready to install the OAM software in the same IAM_HOME. Make sure to install the OAM binaries in a directory different from the one you used during the OID and SOA installation. As before, we only install the software, the instance will be created later. Step 7 Backup the Installation At this point, I normally do a backup (or snapshot in a virtual image) of the installation. Good when you need to go back to this point. Step 8 Configure OID The software is installed and now we need instances to run it. This process is called configuration. For OID use the config.sh found in $IAM_HOME/oid/bin to start the configuration wizard. Normally this runs smoothly. If you encounter some issues check the Oracle Support site for help. This configuration will also start the OID instance. Step 9 Install the Oracle AS SSO Schema Before we install the Forms software we need to install the Oracle AS SSO Schema into the database and OID. This is a rather dangerous procedure, but fully documented in the IAM Installation Guide, Chapter 10. You should finish this in one go, do not reboot your host during the whole procedure. As a precaution, you should make a backup of the OID instance before you start the procedure. Once the backup is ready, read the chapter, including every note, carefully. You can avoid a number of issues by following all the steps and will succeed with a working solution. Step 10 Configure OAM Reached this step? Great. You are ready to create an OAM instance. Use the $IAM_HOME/iam/common/binconfig.sh for this. This will open the WLS Domain Creation Wizard and asks for the libraries to be installed. You should at least select the OAM with Database repository item. The configuration will also start the OAM instance. Step 11 Install WLS for Forms 11g It is quite tempting to install everything in one ORACLE_HOME. Unfortunately this does not work for all OFM packages. Therefore we do another WLS installation in another ORACLE_HOME. The same considerations as in step 3b apply. We call this one FORMS_HOME. Step 12 Install Forms In the FORMS_HOME we now install the binaries for the Forms 11g software. Again, this is a install only step. Configuration starts with the next step. Step 13 Configure Forms To configure Forms 11g we start the Configuration Wizard (config.sh) in FORMS_HOME/bin. This wizard should create a new WebLogic Domain and an OHS instance! Do not extend existing domains or instances! Forms should run in its own instances! When all information is supplied, the wizard will create the domain and instance and starts them automatically.Step 14 Setup your Forms SSO EnvironmentOnce you have implemented and tested your Forms 11g instance, you can configured it for SSO. Yes, this requires the old Oracle AS SSO solution, OIDDAS for creating and assigning users and SSO to setup your partner applications. In this step you should consider to create every user necessary for use within the environment. When done, do not forget to test it. Step 15 Migrate the SSO Repository Since the final goal is to get rid of the old SSO implementation we need to migrate the old SSO repository into the new OID structure. Additionally, this step will also migrate all partner application configurations into OAM 11g. Quite convenient. To do this step, you have to start the upgrade agent (ua or ua.bat or ua.cmd) on the operating system level in $IAM_HOME/bin. Once finished, this wizard will create new osso.conf files for each partner application in $IAM_HOME/upgrade/temp/oam/.Note: At the time of this writing, this step only works if everything is on the same host (ie. OID, OAM, etc.). This restriction might be lifted in later releases. Step 16 Change your OHS sso.conf and shut down OC4J_SECURITY In Step 14 we verified that SSO for our Forms environment works fine. Now, we are shutting the old system done and reconfigure the OHS that acts as the Forms entry point. First we go to the OHS configuration directory and rename the old osso.conf  to osso.conf.10g. Now we change the moduleconf/mod_osso.conf  to point to the new osso.conf file. Copy the new osso.conf  file from $IAM_HOME/upgrade/temp/oam/ to the OHS configuration directory. Restart OHS, test forms by using the same forms links. OAM should now kick in and show the login dialog to ask for your user credentials.Done. Now your Forms environment is successfully integrated with OAM 11g.Enjoy. What's Next? This rather lengthy setup is just the foundation for your growing environment of OAM 11g protections. In the next entry we will show that Forms 11g and ADF Faces 11g can use the same OAM installation and provide real single sign-on. References Nearly everything is documented. Use the documentation! Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1 Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1, Chapter 11-14 Oracle® Fusion Middleware Administrator's Guide for Oracle Access Manager 11gR1, Appendix B Oracle® Fusion Middleware Upgrade Guide for Oracle Identity Management 11gR1, Chapter 10   

  Read the article

• Fixing /etc/shadow with md5 passwords to sha512 passwords

  - by dr jimbob

  I recently upgraded an ubuntu server with many users to a recent version from a version from 2008. The server used to use md5 password hashes (e.g., the shadow passwords began with $1$) and now is configured to use sha512. I'd prefer to keep using sha512, but would like the old users to be able to partially login once with their old password and then be forced to update their password (even if its the same password) generating a sha512. Right now, the old md5-based passwords in /etc/shadow won't let the user login at all (and just appear to be incorrect passwords). This seems like plenty of people should have had to do this before; yet I can't see how to do it, looking in the common places like /etc/pam.d/common-password nad /etc/login.defs. Also users will be logging in via ssh; and I do not have everyone's contact info (email or otherwise); and some login fairly rarely. Any help? (Googling doesn't seem to give any good solutions).

  Read the article

• Ranking hit after site migration

  - by Ben

  I migrated my site from its old domain over a month ago. I followed Google Webmaster Tools completely, including 301 redirects from every existing URL to the new domain, and then submitting a change of address. Traffic continued as normal, but then a few days after submitting the change of address traffic plummeted to about 20-30% of what it was previously. Most of my traffic comes from organic search, and I can see that for the keywords I had targeted before and performed well with and am now ranking much much lower for. In some cases for low competition keywords I've only lost a few places, for higher competition terms I have really suffered. This has started to pick up a bit (one of my keywords I have risen from 195 to 100 in the last week), but it seems to be a very slow process. How seamless is this process normally? I was under the impression that this would not affect my rankings too severely, but it has now been a month since the move and recovery seems to be very slow, if at all. Is it likely that I've missed something? The only change is that I have moved what was the home page to be more of a sub-page, and now in its place is a magazine-style home page. I understand that links to the old site will now be pointing to the latter which means that rankings for some keywords attributed to the old home page will take a hit, but even on other pages that seem to fit in exactly the same page structure as the previous site I have seen a drop in rankings.

  Read the article

• Microsoft Kinect Sales Are 2X Faster Than iPad

  - by Gopinath

  Apple iPad broke many records and it was crowned as the fastest adopted digital device in the history. 2 million iPads were sold in two months and Apple fan boys are all happy with the news. Here comes some good news for Microsoft lovers – Microsoft’s Kinect is selling twice as fast as Apple iPads. In just 25 days after the launch, 2 million Kinects are sold across the globe – that means 100K Kinect sales per day. Very impressive! Kinect was originally released for XBox 360 gaming console but hackers and geeks are able to connect Kinect to Windows 7 PC to control computers using gestures. The possibilities Kinect usage in building natural user interfaces looks very promising. If this growth sustains after the festive season, Microsoft Kinect will displace iPad from the crown of fastest adopted digital device. More details at Xbox 360 Surpasses 2.5 Million Kinect Sensors Sold This article titled,Microsoft Kinect Sales Are 2X Faster Than iPad, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• DC Comics Identifies Krypton on the Star Map

  - by Jason Fitzpatrick

  This week Action Comics Superman #14 hits the stands and DC comics reveals the actual location of Kyrpton, delivered by none other than beloved astrophysicist Neil Tyson. Phil Plait at Bad Astronomy reports on the resolution of fans’ long standing curiosity about the location of Krypton: Well, that’s about to change. DC comics is releasing a new book this week – Action Comics Superman #14 – that finally reveals the answer to this stellar question. And they picked a special guest to reveal it: my old friend Neil Tyson. Actually, Neil did more than just appear in the comic: he was approached by DC to find a good star to fit the story. Red supergiants don’t work; they explode as supernovae when they are too young to have an advanced civilization rise on any orbiting planets. Red giants aren’t a great fit either; they can be old, but none is at the right distance to match the storyline. It would have to be a red dwarf: there are lots of them, they can be very old, and some are close enough to fit the plot. I won’t keep you in suspense: the star is LHS 2520, a red dwarf in the southern constellation of Corvus (at the center of the picture here). It’s an M3.5 dwarf, meaning it has about a quarter of the Sun’s mass, a third its diameter, roughly half the Sun’s temperature, and a luminosity of a mere 1% of our Sun’s. It’s only 27 light years away – very close on the scale of the galaxy – but such a dim bulb you need a telescope to see it at all (for any astronomers out there, the coordinates are RA: 12h 10m 5.77s, Dec: -15° 4m 17.9 s). 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

• Do you think that exposure to BASIC can mutilate your mind? [closed]

  - by bigown

  It is practically impossible to teach good programming to students that have had a prior exposure to BASIC: as potential programmers they are mentally mutilated beyond hope of regeneration -- Edsger W. Dijkstra I have deep respect to Dijkstra but I don't agree with everything he said/wrote. I disagree specially with this quote on linked paper wrote 35 years ago about the Dartmouth BASIC implementation. Many of my coworkers or friends programmers started with BASIC, questions below have answers that indicate many programmers had their first experience on programming at BASIC. AFAIK many good programmers started at BASIC programming. I'm not talking about Visual Basic or other "modern" dialects of BASIC running on machines full of resources. I'm talking about old times BASIC running on "toy" computer, that the programmer had to worry about saving small numbers that need not be calculated as a string to save a measly byte because the computer had only a few hundreds of them, or have to use computed goto for lack of a more powerful feature, and many other things which require the programmer to think much before doing something and forcing the programmer to be creative. If you had experience with old time BASIC on a machine with limited resources (have in mind that a simple micro-controller today has much more resources than a computer in 1975, do you think that BASIC help your mind to find better solutions, to think like an engineer or BASIC drag you to dark side of programming and mutilated you mentally? Is good to learn a programming language running on a computer full of resources where the novice programmer can do all wrong and the program runs without big problems? Or is it better to learn where the programmer can't go wrong? What can you say about the BASIC have helped you to be a better/worse programmer? Would you teach old BASIC running on a 2KB (virtual) machine to a coming programmer? Sure, only exposure to BASIC is bad. Maybe you share my opinion that modern BASIC doesn't help too much because modern BASIC, as long other programming languages, gives facilities which allow the programmer doesn't think deeper. Additional information: Why BASIC?

  Read the article

• WPF or WinForms for Game Development and learning resources?

  - by Stephen Lee Parker

  I'm looking to create a game framework for my own personal use... I want to use WPF, but I'm unsure if that is a wise choice... The games I will be writing should not require high performance graphics, so I am hoping to build on native classes... I do not want to rely on external DLL's unless I generate them myself. The games will be for young children, say 4 to 8. Most will be learning puzzles or simple shooters. The most advanced will be a platform game (non-scrolling screen like the old Atari Miner 2049er game). I think I know how to write something like the old Atari Chopper Command (partially written and my 4 year old loves it, but I used WinForms and GDI), Pac-Man, Tetris, Astroids, Space Invaders, Slider Puzzle, but I do not really know how to write the platform game... In my mind, I'm getting caught in collision detection and how to make a character jump and how to make a character walk up a slope or steps... Can anyone point me to information on developing a platform game in C#? Would you suggest WinForms or WPF for game development? I'm not looking for great graphics and speed, just entertaining game play...

  Read the article

• GRUB 2 problem after Mac OS X update

  - by vallllll

  I have a MacBook Pro in dual boot Mac OS X / Ubuntu 12.04 (Precise Pangolin). When I boot it I have a rEFIt menu, and I can chose between Mac OS X and Linux. A few days ago I have updated Mac OS X from 10.7 (Lion) to 10.8 (Mountain Lion) using a .dmg image provided by my company. Since then when I select Linux in rEFIt it says: No bootable device --insert boot disk and press any key I have tried going to rEFIt partitioning tool. This is what I got: As suggested in Mac OSX Mavericks update rEFIT broken I wanted to fix the issue the same way as AndrewM, but I don't have the option "MBR table must be updated". Then I booted on Ubuntu 12.04 CD, chose repair broken system, chose root patition /dev/sda6 as this is where my Ubuntu file system is. I got a shell, but I don't really know how to repair the poblem since if it was just Windows dual boot. A GRUB update would solve the issue, but here I don't know where the GRUB 2 is installed. Here are results from Parted, and it is a bit confusing for me as the Mac partition is the one with boot: As you can see the entry 1 is an EFI system partition and is the boot partition, so I wonder if I should install GRUB there or in sda6, which is the Ubuntu filesystem. I am not sure should I work on rEFIt shell or Ubuntu. Unfortunately, I don't remember where GRUB was before update. UPDATE: using same link above I have tried RoundSparrow hilltx answer and installed rEFInd, but the result is same.... still no bootable device when I select Linux. UPDATE 2: just used alternate CD again, mounted on /dev/sda6 and the ran update-grub. It seemed to wok and started listing all my kernels. But after rebooting several times still no bootable device when I select Linux in rEFInd. UDATE 3: Have tried to boot from Ubuntu cd and select "boot from first available filesystem. I got error and dropped to grub rescue shell. I even followed the indications on this link but was unable to boot as I tried to use sdb6 but no luck UPDATE 4 as per Rob Smith request here is out put from ls -l $(find /EFI -iname "*.efi") *MACOSX -rw-r--r--@ 1 root admin 55048 29 oct 17:44 /EFI/refind/drivers_x64/btrfs_x64.efi -rw-r--r--@ 1 root admin 38888 29 oct 17:44 /EFI/refind/drivers_x64/ext2_x64.efi -rw-r--r--@ 1 root admin 39304 29 oct 17:44 /EFI/refind/drivers_x64/ext4_x64.efi -rw-r--r--@ 1 root admin 43432 29 oct 17:44 /EFI/refind/drivers_x64/hfs_x64.efi -rw-r--r--@ 1 root admin 38984 29 oct 17:44 /EFI/refind/drivers_x64/iso9660_x64.efi -rw-r--r--@ 1 root admin 43656 29 oct 17:44 /EFI/refind/drivers_x64/reiserfs_x64.efi -rw-r--r--@ 1 root admin 175016 29 oct 17:44 /EFI/refind/refind_x64.efi -rw-rw-r-- 1 root admin 73232 7 mar 2010 /EFI/tools/dbounce.efi -rw-rw-r-- 1 root admin 763248 7 mar 2010 /EFI/tools/dhclient.efi -rw-rw-r-- 1 root admin 67024 7 mar 2010 /EFI/tools/drawbox.efi -rw-rw-r-- 1 root admin 71312 7 mar 2010 /EFI/tools/dumpfv.efi -rw-rw-r-- 1 root admin 84848 7 mar 2010 /EFI/tools/dumpprot.efi -rw-rw-r-- 1 root admin 472912 7 mar 2010 /EFI/tools/ed.efi -rw-rw-r-- 1 root admin 143856 7 mar 2010 /EFI/tools/edit.efi -rw-rw-r-- 1 root admin 1801008 7 mar 2010 /EFI/tools/ftp.efi -rw-r--r--@ 1 root admin 47848 29 oct 17:44 /EFI/tools/gptsync_x64.efi -rw-rw-r-- 1 root admin 320560 7 mar 2010 /EFI/tools/hexdump.efi -rw-rw-r-- 1 root admin 286384 7 mar 2010 /EFI/tools/hostname.efi -rw-rw-r-- 1 root admin 534416 7 mar 2010 /EFI/tools/ifconfig.efi -rw-rw-r-- 1 root admin 395344 7 mar 2010 /EFI/tools/loadarg.efi -rw-rw-r-- 1 root admin 587408 7 mar 2010 /EFI/tools/ping.efi -rw-rw-r-- 1 root admin 730416 7 mar 2010 /EFI/tools/pppd.efi -rw-rw-r-- 1 root admin 561360 7 mar 2010 /EFI/tools/route.efi -rw-rw-r-- 1 root admin 1961712 7 mar 2010 /EFI/tools/shell.efi -rw-rw-r-- 1 root admin 750224 7 mar 2010 /EFI/tools/tcpipv4.efi -rw-rw-r-- 1 root admin 4048 7 mar 2010 /EFI/tools/textmode.efi -rw-rw-r-- 1 root admin 320656 7 mar 2010 /EFI/tools/which.efi *LINUX

  Read the article

• FileOpenPicker/FileSavePicker doesn't allow *.* wildcard file associations

  - by mbrit

  On Twitter, Matthias Jauernig commented that the FileOpenPicker and FileSavePicker doesn't allow *.* wildcard file associations. I was relaxed about this and wrote back that it was related to sandboxing implying it was a "good thing", however as Matthias commented back, perhaps it's not.In Metro-style the sandboxing works that if something gives you a file (e.g. the picker, or a share operation), you can access it regardless of where on the system. If you find the file yourself, you have to declare the type.The reason why I think it's related to sandboxing is because if you work with files programmatically you have to be explicit about the file types. This is to stop malware that you think is only interested in - say .PDF files, scanning and uploading any .EML files that it can find on the machine. It follows then on the pickers that restriction would continue. It allow's the retail store team to validate that an app is likely to behave itself. If it's an app that works with images, locking down the picker so that it can only access image file types makes sense.However Matthias mentioned that he has an app that should allow files of any arbitrary file. That fits more into the "if the user selects it, it must be OK" camp than the "programmatic scanning" camp. So now I'm left wondering why the picker doesn't allow any type to be selected.I think then maybe the decision comes down to simplicity. A lot of the decisions in Metro-style design relate to ideas about "zero intimidation". Allow the user to select any file is too much like Old Windows, and not enough like Reimagined Windows. What happens in Matthias's app if the user selects Explorer.exe as the file he or she wants to work with? I guess it's fine if you expect your user to know what they're doing (Old Windows), but not so fine if you're expecting a three year old to work with it (Reimagined Windows).

  Read the article

• Read All The Books from Skyrim on Your Ebook Reader

  - by Jason Fitzpatrick

  If you’re a fan of the wildly popular RPG game Skyrim, you’ve undoubtedly discovered the books sprinkled throughout the Empire. This collection brings them all together for out-of-game reading. Blogger and Skyrim fan Capaneus enjoyed reading the in-game books so much (found on the shelves of homes and otherwise scattered throughout the virtual world) that he did a little digging in the game files to turn up the source of the books. It turns out he didn’t have to dig too deeply, the files are stored as text documents (and if you have a copy of the game installed right now you could easily open them up yourself). He took those text files and carefully formatted them as MOBI and EPUB files, well suited for use on an ebook reader or tablet. Hit up the link below to grab a copy for your own perusal. While we can’t see this lasting long in the age of copyright enforcement and litigation we’d like to think the company behind Skyrim will see the utility of sharing the books (existing Skyrim owners will enjoy it and the curious will likely be inspired to buy the game). Dovahkiin Gutenberg [Capane.us via The Unofficial Apple Weblog] How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To HTG Explains: When Do You Need to Update Your Drivers?

  Read the article

• Blogger still visible after moving to WP; Google Indexing issues after moving from Blogger to WP

  - by Erin

  I recently migrated from Blogger to Wordpress and am having two major transition issues that are really hurting. Despite literally hours of searching and experimenting, I cannot resolve the following: ISSUE ONE: I fixed all of my old blogger links to 301 redirect successfully to my WP links (the 2 structures are different and I realized too late), but my old blogger blog is still sometimes visible! (the 2 designs are completely different) I had 31 hits on my blogger site just yesterday. I have updated my privacy settings to hide my blogger blog from search engines and not be visible on blogger. I also removed my custom domain from blogger already as well. HELP! Not sure how to stop this. ISSUE two: Despite submitting a new site map and reindexing my pages for my WP blog, I am not visible in search engines, although I was very visible previously. In fact, some of my OLD links are showing up. Am I being penalized?? Any thoughts on how to fix. THANK YOU! Erin my site: www.thelawstudentswife.com

  Read the article

• Informing Googlebot for deprecated pages

  - by trante

  I publish timetables in my website. For example last year I published Number 2 bus Summer 2013 timetable. I has pretty good ranking on Google SERPs for number 2 bus timetable But this year I added a new page with the name "Number 2 bus Summer 2014 timetable". When users search number 2 bus timetable in Google, they find 2013 timetable in first page of SERPs. But I want them to find 2014 timetable. Thy can reach 2014 page with the keywords number 2 bus timetable 2014. But most of the users doesn't write year name. So what's the proper way to say Googlebot that 2013 page is deprecated and newer version is 2014 page ? I created a link from 2013 page to 2013 page and added a deprecation alert for visitors. But I still see 2013 timetable in first page of Google SERPs. Of course it is possible to 301 redirect, 2013 page to 2014 page. But I want users to reach old pages to compare the differences between years. (As you would guess I have many pages like this.) Edit: Why I don't put timetables on same page and show different years' timetables with sorting. Because my old pages has good pagerank scores or SERPs. Removing these old page will remove them.

  Read the article

• Ranking hit after WP site migration

  - by Ben

  I migrated my site from its old domain over a month ago. I followed WMT completely, including 301 redirects from every existing URL to the new domain, and then submitting a change of address. Traffic continued as normal, but then a few days after submitting the change of address traffic plummeted to about 20-30% of what it was previously. Most of my traffic come from organic search, and I can see that for the keywords I had targeted before and performed well with and am now ranking much much lower for. In some cases for low competition keywords I've only lost a few places, for higher competition terms I have really suffered. This has started to pick up a bit (one of my keywords I have risen from 195 to 100 in the last week), but it seems to be a very slow process. How seamless is this process normally? I was under the impression that this would not affect my rankings too severely, but it has now been a month since the move and recovery seems to be very slow, if at all. Is it likely that I've missed something? The only change is that I have moved what was the home page to be more of a sub-page, and now in its place is a magazine-style home page. I understand that links to the old site will now be pointing to the latter which means that rankings for some keywords attributed to the old home page will take a hit, but even on other pages that seem to fit in exactly the same page structure as the previous site I have seen a drop in rankings. Any help would be greatly appreciated. Thanks!

  Read the article

• wifi hardware switch doesn't work on a Dell 1018

  - by user42566

  I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

  Read the article

• Notebook Dell Inspiron N5110 Overheating after Installing Ubuntu 12.04

  - by Gilberto Albino

  there! I am scared here! I am a Windows 7 User and decided to install Ubuntu 12.04 on my Notebook Dell Inspiron N5110 and when the Grub loads with the menu list the fan starts speeding up. If I choose windows the fan is noiseless but if I choose Ubuntu... Gosh!!! It continues speeding up and overheating... I'm very sad about that! Every time I try to use Linux... I get a diferent hardware issue related to incompatibility or bugs! When it's not graphic driver it is bug elsewhere unimaginable!!! If there is a solution for this... I wonder if someone could spend some time helping me out because... I have JUST bought this notebook because it is in the list of Certified Hardware: http://www.ubuntu.com/certification/hardware/201012-6931/ So this is sad and somehow disgusting! Linux is going for the wrong way! It's never gonna be popular while doesn't have so wide hardware support like WIndows! That's a pitty! It's very likely I won't get answered meanwhile I will switch back for windows! I prefer paying my Windows License and having a fully working system than having a free open source software that is about to explode my notebook or toast my hands before! So you linux wonderful guys help! I need somebody help (beattles so I won't cry)

  Read the article

• EF4 CPT5 Code First Remove Cascading Deletes

  - by Dane Morgridge

  I have been using EF4 CTP5 with code first and I really like the new code.  One issue I was having however, was cascading deletes is on by default.  This may come as a surprise as using Entity Framework with anything but code first, this is not the case.  I ran into an exception with some one-to-many relationships I had: Introducing FOREIGN KEY constraint 'ProjectAuthorization_UserProfile' on table 'ProjectAuthorizations' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints. Could not create constraint. See previous errors. To get around this, you can use the fluent API and put some code in the OnModelCreating: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Entity<UserProfile>() 4: .HasMany(u => u.ProjectAuthorizations) 5: .WithRequired(a => a.UserProfile) 6: .WillCascadeOnDelete(false); 7: } This will work to remove the cascading delete, but I have to use the fluent API and it has to be done for every one-to-many relationship that causes the problem. I am personally not a fan of cascading deletes in general (for several reasons) and I’m not a huge fan of fluent APIs.  However, there is a way to do this without using the fluent API.  You can in the OnModelCreating, remove the convention that creates the cascading deletes altogether. 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>(); 4: } Thanks to Jeff Derstadt from Microsoft for the info on removing the convention all together.  There is a way to build a custom attribute to remove it on a case by case basis and I’ll have a post on how to do this in the near future.

  Read the article

• Site migration and SEO impact

  - by John Smith

  I'd greatly appreciate a response on the following question relating to site migration and SEO impact. Here's some background on how my domain name and site is currently configured: My domain name provider has the following settings: host name @ is an A NAME record and points to IP address x.x.x.x host name www is an A NAME record and points to IP address x.x.x.x sub-domain host name new.example.com is an A NAME record and points to IP address x.x.x.x My hosting provider has the following settings: host record @ is an A NAME record and points to IP address x.x.x.x, folder home/public_html/old host record www is a C NAME record and points to example.com sub-domain host record new.example.com points to home/public_html/new I want to: point the domain (example.com AND www.example.com) to the content hosted under folder home/public_html/new, which is currently the content directory for new.example.com retire the content hosted under folder home/public_html/old retire the sub-domain host record new.example.com I believe the easiest method of doing this, is: removing the sub-domain host record new.example.com; and changing the following line in the .htaccess file in home/public_html from # Change 'subdirectory' to be the directory you will use for your main domain. RewriteCond %{REQUEST_URI} !^/old/ to # Change 'subdirectory' to be the directory you will use for your main domain. RewriteCond %{REQUEST_URI} !^/new/ But I don't understand how this will impact my SERP - ideally, I'd like it to remain the same. Research on this topic resulted in the following Google page, which was no help, and this related StackExchange question, which suggests that this should not affect my SERP (at least, not permanently). But I wanted to make certain with a more specific example, and hopefully contribute to the community at the same time. I'd appreciate any feedback on this. Is there a better/recommended method to migrate sites this way? Is there an SEO impact?

  Read the article

• Combine 3D objects in XNA 4

  - by Christoph

  Currently I am writing on my thesis for university, the theme I am working on is 3D Visualization of hierarchical structures using cone trees. I want to do is to draw a cone and arrange a number of spheres at the bottom of the cone. The spheres should be arranged according to the radius and the number of spheres correctly. As you can imagine I need a lot of these cone/sphere combinations. First Attempt I was able to find some tutorials that helped with drawing cones and spheres. Cone public Cone(GraphicsDevice device, float height, int tessellation, string name, List<Sphere> children) { //prepare children and calculate the children spacing and radius of the cone if (children == null || children.Count == 0) { throw new ArgumentNullException("children"); } this.Height = height; this.Name = name; this.Children = children; //create the cone if (tessellation < 3) { throw new ArgumentOutOfRangeException("tessellation"); } //Create a ring of triangels around the outside of the cones bottom for (int i = 0; i < tessellation; i++) { Vector3 normal = this.GetCircleVector(i, tessellation); // add the vertices for the top of the cone base.AddVertex(Vector3.Up * height, normal); //add the bottom circle base.AddVertex(normal * this.radius + Vector3.Down * height, normal); //Add indices base.AddIndex(i * 2); base.AddIndex(i * 2 + 1); base.AddIndex((i * 2 + 2) % (tessellation * 2)); base.AddIndex(i * 2 + 1); base.AddIndex((i * 2 + 3) % (tessellation * 2)); base.AddIndex((i * 2 + 2) % (tessellation * 2)); } //create flate triangle to seal the bottom this.CreateCap(tessellation, height, this.Radius, Vector3.Down); base.InitializePrimitive(device); } Sphere public void Initialize(GraphicsDevice device, Vector3 qi) { int verticalSegments = this.Tesselation; int horizontalSegments = this.Tesselation * 2; //single vertex on the bottom base.AddVertex((qi * this.Radius) + this.lowering, Vector3.Down); for (int i = 0; i < verticalSegments; i++) { float latitude = ((i + 1) * MathHelper.Pi / verticalSegments) - MathHelper.PiOver2; float dy = (float)Math.Sin(latitude); float dxz = (float)Math.Cos(latitude); //Create a singe ring of latitudes for (int j = 0; j < horizontalSegments; j++) { float longitude = j * MathHelper.TwoPi / horizontalSegments; float dx = (float)Math.Cos(longitude) * dxz; float dz = (float)Math.Sin(longitude) * dxz; Vector3 normal = new Vector3(dx, dy, dz); base.AddVertex(normal * this.Radius, normal); } } // Finish with a single vertex at the top of the sphere. AddVertex((qi * this.Radius) + this.lowering, Vector3.Up); // Create a fan connecting the bottom vertex to the bottom latitude ring. for (int i = 0; i < horizontalSegments; i++) { AddIndex(0); AddIndex(1 + (i + 1) % horizontalSegments); AddIndex(1 + i); } // Fill the sphere body with triangles joining each pair of latitude rings. for (int i = 0; i < verticalSegments - 2; i++) { for (int j = 0; j < horizontalSegments; j++) { int nextI = i + 1; int nextJ = (j + 1) % horizontalSegments; base.AddIndex(1 + i * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); } } // Create a fan connecting the top vertex to the top latitude ring. for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(CurrentVertex - 1); base.AddIndex(CurrentVertex - 2 - (i + 1) % horizontalSegments); base.AddIndex(CurrentVertex - 2 - i); } base.InitializePrimitive(device); } The tricky part now is to arrange the spheres at the bottom of the cone. I tried is to draw just the cone and then draw the spheres. I need a lot of these cones, so it would be pretty hard to calculate all the positions correctly. Second Attempt So the second try was to generate a object that builds all vertices of the cone and all of the spheres at once. So I was hoping to render a cone with all its spheres arranged correctly. After a short debug I found out that the cone is created and the first sphere, when it turn of the second sphere I am running into an OutOfBoundsException of ushort.MaxValue. Cone and Spheres public ConeWithSpheres(GraphicsDevice device, float height, float coneDiameter, float sphereDiameter, int coneTessellation, int sphereTessellation, int numberOfSpheres) { if (coneTessellation < 3) { throw new ArgumentException(string.Format("{0} is to small for the tessellation of the cone. The number must be greater or equal to 3", coneTessellation)); } if (sphereTessellation < 3) { throw new ArgumentException(string.Format("{0} is to small for the tessellation of the sphere. The number must be greater or equal to 3", sphereTessellation)); } //set properties this.Height = height; this.ConeDiameter = coneDiameter; this.SphereDiameter = sphereDiameter; this.NumberOfChildren = numberOfSpheres; //end set properties //generate the cone this.GenerateCone(device, coneTessellation); //generate the spheres //vector that defines the Y position of the sphere on the cones bottom Vector3 lowering = new Vector3(0, 0.888f, 0); this.GenerateSpheres(device, sphereTessellation, numberOfSpheres, lowering); } // ------ GENERATE CONE ------ private void GenerateCone(GraphicsDevice device, int coneTessellation) { int doubleTessellation = coneTessellation * 2; //Create a ring of triangels around the outside of the cones bottom for (int index = 0; index < coneTessellation; index++) { Vector3 normal = this.GetCircleVector(index, coneTessellation); //add the vertices for the top of the cone base.AddVertex(Vector3.Up * this.Height, normal); //add the bottom of the cone base.AddVertex(normal * this.ConeRadius + Vector3.Down * this.Height, normal); //add indices base.AddIndex(index * 2); base.AddIndex(index * 2 + 1); base.AddIndex((index * 2 + 2) % doubleTessellation); base.AddIndex(index * 2 + 1); base.AddIndex((index * 2 + 3) % doubleTessellation); base.AddIndex((index * 2 + 2) % doubleTessellation); } //create flate triangle to seal the bottom this.CreateCap(coneTessellation, this.Height, this.ConeRadius, Vector3.Down); base.InitializePrimitive(device); } // ------ GENERATE SPHERES ------ private void GenerateSpheres(GraphicsDevice device, int sphereTessellation, int numberOfSpheres, Vector3 lowering) { int verticalSegments = sphereTessellation; int horizontalSegments = sphereTessellation * 2; for (int childCount = 1; childCount < numberOfSpheres; childCount++) { //single vertex at the bottom of the sphere base.AddVertex((this.GetCircleVector(childCount, this.NumberOfChildren) * this.SphereRadius) + lowering, Vector3.Down); for (int verticalSegmentsCount = 0; verticalSegmentsCount < verticalSegments; verticalSegmentsCount++) { float latitude = ((verticalSegmentsCount + 1) * MathHelper.Pi / verticalSegments) - MathHelper.PiOver2; float dy = (float)Math.Sin(latitude); float dxz = (float)Math.Cos(latitude); //create a single ring of latitudes for (int horizontalSegmentsCount = 0; horizontalSegmentsCount < horizontalSegments; horizontalSegmentsCount++) { float longitude = horizontalSegmentsCount * MathHelper.TwoPi / horizontalSegments; float dx = (float)Math.Cos(longitude) * dxz; float dz = (float)Math.Sin(longitude) * dxz; Vector3 normal = new Vector3(dx, dy, dz); base.AddVertex((normal * this.SphereRadius) + lowering, normal); } } //finish with a single vertex at the top of the sphere base.AddVertex((this.GetCircleVector(childCount, this.NumberOfChildren) * this.SphereRadius) + lowering, Vector3.Up); //create a fan connecting the bottom vertex to the bottom latitude ring for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(0); base.AddIndex(1 + (i + 1) % horizontalSegments); base.AddIndex(1 + i); } //Fill the sphere body with triangles joining each pair of latitude rings for (int i = 0; i < verticalSegments - 2; i++) { for (int j = 0; j < horizontalSegments; j++) { int nextI = i + 1; int nextJ = (j + 1) % horizontalSegments; base.AddIndex(1 + i * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); base.AddIndex(1 + i * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + nextJ); base.AddIndex(1 + nextI * horizontalSegments + j); } } //create a fan connecting the top vertiex to the top latitude for (int i = 0; i < horizontalSegments; i++) { base.AddIndex(this.CurrentVertex - 1); base.AddIndex(this.CurrentVertex - 2 - (i + 1) % horizontalSegments); base.AddIndex(this.CurrentVertex - 2 - i); } base.InitializePrimitive(device); } } Any ideas how I could fix this?

  Read the article

• Updating an interface to bootstrap

  - by Anagio

  I'm updating a web apps interface to bootstrap. There's a lot of existing CSS and Javascript/jQuery i'll have to migrate, most i'll scrap and use bootstraps. But for parts of the app that use datatables and such all that code has to be migrated. I'm working on a development server. The app has a header.phtml sidebar.phtml and a lot of content area view files. Right now i'm building static versions of view files say the header. I then open my existing header.phtml into notepad++ split screen with the static file and copy over the dynamic code. Then replace the old header.phtml with the one I just made. To make sure the header displayed correctly I had to add all the CSS and JS from bootstrap. This is conflicting with the current CSS styles and some JS conflicts as well. Should I go through the app note what JS I absolutely need what I don't and same with the CSS. Then strip all the CSS/JS from the old app that is not needed so it only has bootstraps and any other critical files and not worry about the way pages look as i'm making progress to updating them. I'd be working on mostly a wireframe of the old site without any styles until I get to applying bootstraps. Is this efficient or is there another way I can get through all these files and update them easily?

  Read the article

• How to resize / enlarge / grow a non-LVM ext4 partition

  - by Mischa

  I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

  Read the article

• DDD and Value Objects. Are mutable Value Objects a good candidate for Non Aggr. Root Entity?

  - by Tony

  Here is a little problem Have an entity, with a value object. Not a problem. I replace a value object for a new one, then nhibernate inserts the new value and orphan the old one, then deletes it. Ok, that's a problem. Insured is my entity in my domain. He has a collection of Addresses (value objects). One of the addresses is the MailingAddress. When we want to update the mailing address, let's say zipcode was wrong, following Mr. Evans doctrine, we must replace the old object for a new one since it's immutable (a value object right?). But we don't want to delete the row thou, because that address's PK is a FK in a MailingHistory table. So, following Mr. Evans doctrine, we are pretty much screwed here. Unless i make my addressses Entities, so i don't have to "replace" it, and simply update its zipcode member, like the old good days. What would you suggest me in this case? The way i see it, ValueObjects are only useful when you want to encapsulate a group of database table's columns (component in nhibernate). Everything that has a persistence id in the database, is better off to make it an Entity (not necessarily an aggregate root) so you can update its members without recreating the whole object graph, specially if that's a deep-nested object. Do you concur? Is it allowed by Mr. Evans to have a mutable value object? Or is a mutable value object a candidate for an Entity? Thanks

  Read the article

• NBC Sports Chooses Oracle for Social Relationship Management

  - by Pat Ma

  0 0 1 247 1411 involver 11 3 1655 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; } NBC Sports wanted to engage fans, grow their audience, and give their advertising customers more value. They wanted to use social media to accomplish this. NBC Sports recognized that sports in inherently social. When you watch a game at the stadium or at home, you’re chatting with the people around you, commenting on plays, and celebrating together after each score. NBC Sports wanted to deliver this same social experience via social media channels. NBC Sports used Oracle Social Relationship Management (SRM) to create an online sporting community on Facebook. Fans can watch sporting events live on NBC television while participating in fan commentary about the event on Facebook. The online fan community is extremely engaged – much like fans in a sporting stadium would be during a game. NBC Sports also pose sporting questions, provide sporting news, and tie-in special promotions with their advertisers to their fans via Facebook. Since implementing their social strategy, NBC Sports has seen their fans become more engaged, their television audience grow, and their advertisers happier with new social offerings. To see how Oracle Social Relationship Management can help create better customer experiences for your company, contact Oracle here. Watch NBC Sports Video: Mark Lazarus, Chairman, NBC Sports Group, describes how Oracle Cloud’s SRM tools helped the broadcaster engage with their fans on social media channels. Watch Thomas Kurian Keynote: Thomas Kurian, Executive Vice President of Product Development, Oracle, describes Oracle’s Cloud platform and application strategy, how it is transforming business management, and delivering great customer experiences here.

  Read the article

• fglrx: No matching Device section for instance... found how to fix it?

  - by Lejo

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev from lispci i foud out finally, that my video card is in 01:00.0 slot. logically, if fglrx searches for a vdeo card device in a wrong place, it will not find it. 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] Thanks in advance.

  Read the article

• EPM troubleshooting Utilities

  - by THE

  (in via Maurice) "Are you keeping up-to-date with the latest troubleshooting utilities introduced from EPM 11.1.2.2? These are typically not described in product documentation, so you might miss references to them. The following five utilities may be run from the command line.(1) Deployment Report was introduced with EPM 11.1.2.2 (11 April 2012). It details logical web addresses, web servers, application ports, database connections, user directories, database repositories configured for the EPM system, data directories used by EPM system products, instance directories, FMW homes, deployment distory, et cetera. It also helps to keep you honest about whether you made changes to the system and at what times! Download Shared Services patch 13530721 to get the backported functionality in EPM 11.1.2.1. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/epmsys_registry.sh report deployment (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\epmsys_registry.bat report deployment (on Microsoft Windows). The output is saved under \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\deployment_report.html (2) Log Analysis has received more "press". It was released with EPM 11.1.2.3 and helps the user to slice and dice EPM logs. It has many parameters which are documented when run without parameters, when run with the -h parameter, or in the 'Readme' file. It has also been released as a standalone utility for EPM 11.1.2.3 and earlier versions. (Sign in to  My Oracle Support, click the 'Patches & Updates' tab, enter the patch number 17425397, and click the Search button. Download the appropriate platform-specific zip file, unzip, and read the 'Readme' file. Note that you must provide a proper value to a JAVA_HOME environment variable [pointer to the mother directory of the Java /bin subdirectory] in the loganalysis.bat | .sh file and use the -d parameter when running standalone.) Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/loganalysis.sh -h (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\loganalysis.bat -h (on Microsoft Windows). The output is saved under the \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\ subdirectory. (3) The Registry Cleanup command may be used (without fear!) to clean up various corruptions which can  affect the Hyperion (database-based) Repository. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/registry-cleanup.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\registry-cleanup.bat (on Microsoft Windows). The actions are described on the command line. (4) The Remove Instance Command is only used if there are two or more instances configured on one computer and one of those should be deleted. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/remove-instance.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\remove-instance.bat (on Microsoft Windows). (5) The Reset Configuration Tool was introduced with EPM 11.1.2.2. It nullifies Shared Services Hyperion Registry settings so that a service may be reconfigured. You may locate the values to substitute for <product> or <task> by scanning registry.html (generated by running epmsys_registry.bat | .sh). Find productNAME in INSTANCE_TASKS_CONFIGURATION and SYSTEM_TASKS_CONFIGURATION nodes and identify tasks by property pairs that have values of 'Configurated' or 'Pending'. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/resetConfigTask.sh -product <product> -task <task> (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\resetConfigTask.bat -product <product> -task <task> (on Microsoft Windows). "Thanks to Maurice for this collection of utilities.

  Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >