Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 636/734 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >

• Hard Drive benchmark values show write very very slow

  - by John

  I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

  Read the article

• VirtualBox communication from Linux to/from Windows 7

  - by J. Otto Tennant

  VirtualBox is running in Windows 7 as the host. VirtualBox has the two modifications (one is called Guest Additions; don't remember the other). The Virtual machine has "bridged" networking selected. I have SAMBA set up (now, the problem may be here; it has been three or four years since I last did this) on the Linux guest machine. Neither guest nor host sees the other. From the Windows 7 command prompt, the IP address of the Linux guest pings. The IP address of another computer (a separate Windows 7 on the wireless network) pings from the Linux guest. (I have no idea what IP address the Windows 7 host itself has. The output of "netstat" does not seem to be useful.) So, it seem to me that something should be working. The only workgroup on the LAN is inventively named WORKGROUP. SMB4K should be seeing something. There must be a simple setup step that I am missing. (FWIW, there are two processes running smbd, and no process is running nmbd. YaST says that nmbd is set to run. I am not sure what this means.)

  Read the article

• TFS 2012: Backup Plan Fails with empty log file

  - by Vitor

  I have a Team Foundation Server 2012 installation with Power Tools, and I defined a backup plan using the wizard found in the "Database Backup Tools" in the Team Foundation Server Administration Console. I set the backup plan to do a full database backup on Sunday mornings, to another server in the network. I followed the wizard with no problems and the Backup Plan was set successfully. However when the backup runs it returns Error as result and when I go to the log file I only get the header and no further info: [Info @01:00:01.078] ==================================================================== [Info @01:00:01.078] Team Foundation Server Administration Log [Info @01:00:01.078] Version : 11.0.50727.1 [Info @01:00:01.078] DateTime : 11/25/2012 02:00:01 [Info @01:00:01.078] Type : Full Backup Activity [Info @01:00:01.078] User : <backup user> [Info @01:00:01.078] Machine : <TFS Server> [Info @01:00:01.078] System : Microsoft Windows NT 6.2.9200.0 (AMD64) [Info @01:00:01.078] ==================================================================== I can imagine it's a permission problem, but I have no idea where to start ... Can anyone help? Thank you for your time! EDIT I'm not sure if it is related, but I logged in with "backup user" in "TFS Server" and there was this crash window opened with "TFS Power Tool Shell Extension (TfsComProviderSvr) has stopped working". The full crash log is here: Problem signature: Problem Event Name: APPCRASH Application Name: TfsComProviderSvr.exe Application Version: 11.0.50727.0 Application Timestamp: 5050cd2a Fault Module Name: StackHash_e8da Fault Module Version: 6.2.9200.16420 Fault Module Timestamp: 505aaa82 Exception Code: c0000374 Exception Offset: PCH_72_FROM_ntdll+0x00040DA8 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1043 Additional Information 1: e8da Additional Information 2: e8dac447e1089515a72386afa6746972 Additional Information 3: d903 Additional Information 4: d9036f986c69f4492a70e4cf004fb44d Does it help? Thanks everyone!

  Read the article

• FTP Server on Centos 5.8 - Transfer fails randomly

  - by Diego

  Hi have ProFTPD runningon a brand new CentOS 5.8 server with Plesk, and its behaviour is inconsistent at best. I tried to transfer a directory from my PC, and every time I get a transfer failed on a random file. It's never the same one that fails, it just fails. Sometimes it's a .gif, sometimes it's a .css, sometimes it's a JPG. Of several hundred files, a dozen is always failing for no apparent reason. The error that I get is the following: COMMAND:> [27/11/2012 11:43:52] STOR main_border.gif [27/11/2012 11:43:53] 500 Invalid command: try being more creative ERROR:> [27/11/2012 11:43:53] Syntax error: command unrecognized. The above is just an example, the "command unrecognized" occurs with LIST and other commands as well. Here's the ProFTPD configuration, just in case: ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime Port 21 Umask 022 MaxInstances 30 ScoreboardFile /var/run/proftpd/scoreboard TransferLog /usr/local/psa/var/log/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.include Note: file /etc/proftpd.include is blank. The above is the default configuration set by Plesk 11. I don't know much of why is that way, my knowledge of Linux System Administration is very basic and the one of ProFTPD is a complete zero. Thanks in advance for the help. Update Issue experienced with CuteFTP and FileZilla. Update Replaced ProFTPd with PureFTPd, issue persists. Sometimes I get "command unrecognized", sometimes "failed to establish data connection". I'm starting to think that it could be a network issue, but I have completely zero knowledge of networking.

  Read the article

• Strange IIS hits originating from Trend Micro

  - by TesterTurnedDeveloper

  I'm trying to trace thru an error on a extranet site I maintain. I've had a look thru the logs, and I'm seeing hits originate from these IP addresses: 216.104.15.130 216.104.15.138 216.104.15.142 216.104.15.13 150.70.84.49 150.70.84.44 Network-tools.com gives 'TREND MICRO INCORPORATED' as the owner of all these IPs. The hits fail as they aren't sending any cookies (therefore aren't considered logged in). The hits are to pages containing URLs that only the logged in user would see, i.e. ImageEdit.aspx?ImageId=467424. I.e. the server isn't guessing these URLs, someone would have to log into the site to know these URLs exist. Theory: the Trend Antivirus client grabs URLs and sends them to the server for 'extra processing'? Googling around gives me this: http://www.forumpostersunion.com/showthread.php?p=51272 - where people are reporting comment spam from these addresses. The articles says their servers have been hacked (a few months ago, presumably fixed now?). A hacked server wouldn't explain how the URLs have been plucked off the user's PCs. Has anyone seen this before? Anything nefarious going on here?

  Read the article

• can't backup to a NAS drive as offline schedule task

  - by imageng

  I have seen this problem issue discussed in several forums including this one, but could not find a solution. On MS server 2003 I configured a Backup task, the target backup is on a NAS disc (Seagate BlackArmor NAS 110). The backup task is working well as a scheduled task or by a direct command, when I am logged on. It is not working when the user is offline (in this case - Administrator). I already tried the following actions: 1) addressing to the target as network drive (Y:location..), 2)Using UNC instead, 3) making the drive a domain member (the NAS admin S/W allows to define itself as a domain member) The result log message for 1 and 2 is: "The operation was not performed because the specified media cannot be found." The result log message for 3 is empty file. The schedule task "RUN" command is: C:\WINDOWS\system32\ntbackup.exe backup "@C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\de-board.bks" /a /d "Set created 2/14/2010 at 5:10 PM" /v:yes /r:no /rs:no /hc:off /m incremental /j "de-board" /l:s /f "\10.0.0.8\public\Backups\IBMServer\de-board.bkf" 10.0.0.8 is the static IP of the NAS. "Run only if logged on" is NOT marked. Password of the administrator user is set. It is obvious that there is no access to the NAS when the user is logged-out. Do you have any idea how can I solve it? Thanks

  Read the article

• IPv6 Routing / Subnetting

  - by nappo

  Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

  Read the article

• Reverse and Forward DNS set up correctly but sometimes MapReduce job fails

  - by phodamentals

  Ever since we switched over our cluster to communicate via private interfaces and created a DNS server with correct forward and reverse lookup zones, we get this message before the M/R job runs: ERROR org.apache.hadoop.hbase.mapreduce.TableInputFormatBase - Cannot resolve the host name for /192.168.3.9 because of javax.naming.NameNotFoundException: DNS name not found [response code 3]; remaining name '9.3.168.192.in-addr.arpa' A dig and nslookup both show that the reverse and forward look-ups both get good responses with no errors from within the cluster. Shortly after these messages, the job runs...but every once in awhile we get a NPE: Exception in thread "main" java.lang.NullPointerException INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.net.DNS.reverseDns(DNS.java:93) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.hbase.mapreduce.TableInputFormatBase.reverseDNS(TableInputFormatBase.java:219) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.hbase.mapreduce.TableInputFormatBase.getSplits(TableInputFormatBase.java:184) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient.writeNewSplits(JobClient.java:1063) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient.writeSplits(JobClient.java:1080) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient.access$600(JobClient.java:174) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient$2.run(JobClient.java:992) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient$2.run(JobClient.java:945) INFO app.insights.search.SearchIndexUpdater - at java.security.AccessController.doPrivileged(Native Method) INFO app.insights.search.SearchIndexUpdater - at javax.security.auth.Subject.doAs(Subject.java:415) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.security.UserGroupInformation.doAs(UserGroupInformation.java:1408) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapred.JobClient.submitJobInternal(JobClient.java:945) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapreduce.Job.submit(Job.java:566) INFO app.insights.search.SearchIndexUpdater - at org.apache.hadoop.mapreduce.Job.waitForCompletion(Job.java:596) INFO app.insights.search.SearchIndexUpdater - at app.insights.search.correlator.comments.CommentCorrelator.main(CommentCorrelator.java:72 Does anyone else who has set-up a CDH Hadoop cluster on a private network w/DNS server get this? CDH 4.3.1 with MR1 2.0.0 and HBase 0.94.6

  Read the article

• Using radvd to advertise ipv6 over VPN connection using DD-wrt

  - by Sean Madden

  My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• CPU-adaptive compression

  - by liori

  Hello, Let assume I need to send some data from one computer to another, over a pretty fast network... for example standard 100Mbit connection (~10MB/s). My disk drives are standard HDD, so their speed is somewhere between 30MB/s and 100MB/s. So I guess that compressing the data on the fly could help. But... I don't want to be limited by CPU. If I choose an algorithm that is intensive on CPU, the transfer will actually go slower than without compression. This is difficult with compressors like GZIP and BZIP2 because you usually set the compression strength once for the whole transfer, and my data streams are sometimes easy, sometimes hard to compress--this makes the process suboptimal because sometimes I do not use full CPU, and sometimes the bandwidth is underutilized. Is there a compression program that would adapt to current CPU/bandwidth and hit the sweet spot so that the transfer will be optimal? Ideally for Linux, but I am still curious about all solutions. I'd love to see something compatible with GZIP/BZIP2 decompressors, but this is not necessary. So I'd like to optimize total transfer time, not simply amount of bytes to send. Also I don't need real time decompression... real time compression is enough. The destination host can process the data later in its spare time. I know this doesn't change much (compression is usually much more CPU-intensive than decompression), but if there's a solution that could use this fact, all the better. Each time I am transferring different data, and I really want to make these one-time transfers as quick as possible. So I won't benefit from getting multiple transfers faster due to stronger compression. Thanks,

  Read the article

• Shared printer hosted by Windows 7 to XP peers [closed]

  - by Alistair Knock

  Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

  Read the article

• How should I configure my Active Directory servers so that if one goes down, users are not kicked off SQL?

  - by Matty Brown

  Today, we shut down one of our Active Directory servers during office hours to check the loading on a UPS. Since all the server did was provide Active Directory in a separate building incase the main building caught fire, or whatever, we didn't think it would have any effect on our users. Seconds after the server was shut down, we had a dozen phone calls from users experiencing this issue:- [Microsoft SQL Server Login] SQLState: '28000' [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with authentication. Once we realized what had happened, we quickly rebooted the down Active Directory server. Problem solved. But why did this happen. And what if one day a server has a breakdown and is offline for hours, or days? Shouldn't the other Active Directory servers in the domain service authentication requests without disruption to users? We have 3 Windows Server 2003 Standard servers running Active Directory as Domain Controllers with Global Catalogs, all physically located on the same network at Gigabit speeds. I believe the domain was originally Windows Server 2000, or maybe even NT 4.0. Could the issue be to down to old Group Policies inherited from these old server OS's, or some default setting in Active Directory that needs changing?

  Read the article

• One Active Directory, Multiple Remote Desktop Services (Server 2012 solution)

  - by Trinitrotoluene

  What I am trying to do is quite complex, so I figured I'd throw it out to a wider audience to see if anyone can find a flaw. What I am trying to do (as an MSP/VAR) is design a solution that will give multiple companies a session based remote desktop (companies that need to be kept completely seperate), using only a handful of servers. This is how I imagine it at the moment: CORE SERVER - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC01 (Active Directory Domain Services for mycloud.local) Server2: Cloud-EX01 (Exchange Server 2010 running multi tenant mode) Server3: Cloud-SG01 (Remote Desktop Gateway) CORE SERVER 2 - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC02 (Active Directory Domain Services for mycloud.local) Server2: Cloud-TS01 (Remote Desktop Session Host for Company A) Server3: Cloud-TS02 (Remote Desktop Session Host for Company B) Server4: Cloud-TS03 (Remote Desktop Session Host for Company C) What I thought about doing was setting up each Organisation in their own OU (perhaps creating their OU structure based on the Excahnge 2010 tenant OU structure so the accounts are linked). Each company would get a Remote Desktop Session Host server that would also serve as a file server. This server would be seperated from the rest on its own range. The server Cloud-SG01 would have access to all these networks and route the traffic to the appropriate network when a client connects and authenticated so they are pushed onto the correct server (Based on session collections in 2012). I won't lie this is something I have come up with quite quickly so there may well be something gapingly obvious that I am missing. Any feedback would be appreciated.

  Read the article

• Setting up MongoDB in High Performance Computing LSF linux cluster

  - by Dnaiel

  I am trying to run mongo in a LSF cluster computing environment where I have no admin control. Our sysadmin installed mongodb, but it is not running. Any ideas on what should I ask the server admin to do for it to run? Or if I could run it locally? [node1382]allelix> mongod --dbpath /users/dnaiel/ma/mongodb/ Tue Oct 2 21:33:48 [initandlisten] MongoDB starting : pid=22436 port=27017 dbpath=/seq/epigenome01/allelix/ma/mongodb/ 64-bit host=node1382 Tue Oct 2 21:33:48 [initandlisten] Tue Oct 2 21:33:48 [initandlisten] ** WARNING: You are running on a NUMA machine. Tue Oct 2 21:33:48 [initandlisten] ** We suggest launching mongod like this to avoid performance problems: Tue Oct 2 21:33:48 [initandlisten] ** numactl --interleave=all mongod [other options] Tue Oct 2 21:33:48 [initandlisten] Tue Oct 2 21:33:48 [initandlisten] db version v2.2.0, pdfile version 4.5 Tue Oct 2 21:33:48 [initandlisten] git version: f5e83eae9cfbec7fb7a071321928f00d1b0c5207 Tue Oct 2 21:33:48 [initandlisten] build info: Linux ip-10-2-29-40 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 20 17:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_49 Tue Oct 2 21:33:48 [initandlisten] options: { dbpath: "/users/dnaiel/ma/mongodb/" } Tue Oct 2 21:33:48 [initandlisten] journal dir=users/dnaiel/ma/mongodb/journal Tue Oct 2 21:33:48 [initandlisten] recover begin Tue Oct 2 21:33:48 [initandlisten] info no lsn file in journal/ directory Tue Oct 2 21:33:48 [initandlisten] recover lsn: 0 Tue Oct 2 21:33:48 [initandlisten] recover /seq/epigenome01/allelix/ma/mongodb/journal/j._0 Tue Oct 2 21:33:48 [initandlisten] recover cleaning up Tue Oct 2 21:33:48 [initandlisten] removeJournalFiles Tue Oct 2 21:33:48 [initandlisten] recover done Tue Oct 2 21:33:48 [websvr] admin web console waiting for connections on port 28017 Tue Oct 2 21:33:48 [initandlisten] waiting for connections on port 27017 It basically waits forever and cannot start mongodb. These servers are not webservers but they do have network access, it's a cloud computing LSF environment system. Any advice would be welcome, thanks in advance.

  Read the article

• Windows 2003 R2 zip program blocking EXE file

  - by Harvey Kwok

  I have a Windows 2003 R2 Enterprise Edition SP2 32-bit machine with all latest patch (as of 1-6-2011). It's a VM. I have a zip file, including a pdf file, a txt file and a exe file. If I copy the zip file onto the machine via a shared network drive, I can unzip all the files properly without problems. If I put the zip file on my web server and then I download it from there, I can only unzip the pdf file and txt file. The exe file is silently ignored. I searched the web and found somebody reporting similar issue on XP. If I right click on the zip file downloaded from the web server, at the bottom of the general page, it has a warning message saying that "This file came from antoher computer and might be blocked to help protect this computer" I understand that I can solve the problem by simply clicking the "Unblock" button and extract the file again. The things that bothering me is that why the warning message says "might be blocked"? I tried downloading the same zip file from the same web server on to my Windows 7 box with latest patch. It also shows the same warning message. However, even with the warning message, I can extract all the files properly without clicking the "Unblock" button. Is it a bug in Windows 2003 R2 SP1? Is there any security settings controlling this? How likely will the end user seeing this problem? I want to dig into this because I am worrying people downloading my zip file from my web server might see similar problems. The first thought coming to the user's mind will be the zip file is somehow corrupted. Honestly, I didn't know this "Unblock" feature in Windows before I run into this problem. EDIT I just tried it on another Windows 2003 R2 SP1 machine. The zip program doesn't block the EXE file on that machine either. Both Windows 2003 R2 SP1 machines are joining to the same forest.

  Read the article

• iptables advanced routing

  - by Shamanu4

  I have a Centos server acting as a NAT in my network. This server has one external (later ext1) interface and three internal (later int1, int2 and int3). Egress traffic comes from users via int1 and after MASQUERADE goes via ext1. Ingress traffic comes from ext1, MASQUERADE, and goes via int2 or int3 according to static routes. | ext1 | x.x.x.x/24 +---------|----------------------+ | | | Centos server (NAT) | | | +---|------|---------------|-----+ | | | int1 | | int2 | int3 10.30.1.10/24 | | 10.30.2.10/24 | 10.30.3.10/24 ^ v v 10.30.1.1/24 | | 10.30.2.1/24 | 10.30.3.1/24 +---|------|---------------|-----+ | | | | | | | v v | | ^ -Traffic policer- | | |_____________ | | | | | +------------------|-------------+ | 192.168.0.1/16 | | Clients 192.168.0.0/16 The problem: Egress traffic seems to be dropped after PREROUTING table. Packet counters are not changing on MASQUERADE rule in POSTROUTING. If I change the routes to clients causing the traffic go back via int1 - everything works perfectly. current iptable configuration is very simple: # cat /etc/sysconfig/iptables *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -I INPUT 1 -i int1 -j ACCEPT -A FORWARD -j ACCEPT COMMIT *nat -A POSTROUTING -o ext1 -j MASQUERADE # COMMIT Can anyone point me what I'm missing? Thanks. UPDATE: 192.168.100.60 via 10.30.2.1 dev int2 proto zebra # routes to clients ... 192.168.100.61 via 10.30.3.1 dev int3 proto zebra # ... I have a lot of them x.x.x.0/24 dev ext1 proto kernel scope link src x.x.x.x 10.30.1.0/24 dev int1 proto kernel scope link src 10.30.1.10 10.30.2.0/24 dev int2 proto kernel scope link src 10.30.2.10 10.30.3.0/24 dev int3 proto kernel scope link src 10.30.3.10 169.254.0.0/16 dev ext1 scope link metric 1003 169.254.0.0/16 dev int1 scope link metric 1004 169.254.0.0/16 dev int2 scope link metric 1005 169.254.0.0/16 dev int3 scope link metric 1006 blackhole 192.168.0.0/16 default via x.x.x.y dev ext1 Clients have 192.168.0.1 as gateway, which is redirecting them to 10.30.1.1

  Read the article

• apt-get : Size mismatch

  - by Cédric Girard

  I created a private deb repository to spread a software and it's updates to 600 Ubuntu netbooks. Each time the network is connected, my script try to do a apt-get update. But sometimes (quite often in fact), I have this : Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch The server is an 2.2 Apache, HTTPS only. There is no error on it's logs. Here is the script : apt-get update apt-get dist-upgrade --force-yes --yes Here is the complete output of apt-get Ign https://myserver maverick Release.gpg Ign https://myserver/ubuntu/ maverick/main Translation-en Ign https://myserver maverick Release Ign https://myserver maverick/main i386 Packages/DiffIndex Ign https://myserver maverick/main i386 Packages Ign https://myserver maverick/main i386 Packages Hit https://myserver maverick/main i386 Packages Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: majdb utilitaires voosicomat 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 6207kB/6273kB of archives. After this operation, 0B of additional disk space will be used. WARNING: The following packages cannot be authenticated! utilitaires voosicomat majdb Get:1 https://myserver/ubuntu/ maverick/main voosicomat all 2.0.1 [4755kB] Get:2 https://myserver/ubuntu/ maverick/main majdb all 1.0.17 [1452kB] Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch Fetched 7091kB in 21s (324kB/s) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Regards Cédric

  Read the article

• Swap static public IPs without creating DNS conflicts?

  - by Jakobud

  Our ISP is Comcast and we have 5 static public IPs from them that we use for various services, including customers connecting to our network, VPN, web, DNS, etc... We need more IP addresses from Comcast. Unfortunately, Comcast is telling us that they can't just simply give us 5 more addresses. They only give static IP addresses in blocks of 1, 5 or 13. In order for us to get more static IPs, they have to take away our current 5 static IPs and give us 13 new ones. How do we make this transition without causing all sorts of DNS chaos? We run public DNS servers, so we can make the DNS changes ourselves, but it will take some time obviously for those DNS changes to propagate throughout the internet. Are there any easy ways to make this transition? Like create some type of fallback DNS entry or something? Surely there must be some sort of procedure for this kind of thing. The Comcast support guy was useless.

  Read the article

• IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing problem

  - by Ernest Mueller

  Hey all, I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

  Read the article

• How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

  - by joechip

  I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

  Read the article

• virtualisation with kvm: export services from guest to the host

  - by ascobol

  Hello, I would like to export some services from the guest os to the host os, via kvm, and by the same way learn some things about networking. I have tried the following commands: In the host (kubuntu 10.4): $ sudo tunctl -u ascobol Set 'tap0' persistent and owned by uid 2401 $ sudo ifconfig tap0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 The ifconfig command returns: $ /sbin/ifconfig tap0 Link encap:Ethernet HWaddr 3e:4e:e3:cc:bc:92 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::3c4e:e3ff:fecc:bc92/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:17 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Then I run the virtual machine (ubuntu server 10.4): $ sudo kvm -hda ubuntuserver104.qcow2 -net nic -net tap,name=tap0,script=no (I'm using sudo because without it fails with the following message:) warning: could not configure /dev/net/tun: no virtual network emulation With sudo the virtual machine boots, I just get this message: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin" In the virtual machine: $ ifconfig eth0 192.168.2.2 netmask 255.255.255.0 broadcast 192.168.2.255 Now if I run: $ ssh 192.168.2.2 I just get a No route to host What is wrong with this setup ? Thanks !

  Read the article

• Client certificate based encryption

  - by Timo Willemsen

  I have a question about security of a file on a webserver. I have a file on my webserver which is used by my webapplication. It's a bitcoin wallet. Essentially it's a file with a private key in it used to decrypt messages. Now, my webapplication uses the file, because it's used to recieve transactions made trough the bitcoin network. I was looking into ways to secure it. Obviously if someone has root access to the server, he can do the same as my application. However, I need to find a way to encrypt it. I was thinking of something like this, but I have no clue if this is actually going to work: Client logs in with some sort of client certificate. Webapplication creates a wallet file. Webapplication encrypts file with client certificate. If the application wants to access the file, it has to use the client certificate. So basically, if someone gets root access to the site, they cannot access the wallet. Is this possible and does anyone know about an implementation of this? Are there any problems with this? And how safe would this be?

  Read the article

• Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

  - by Radix

  The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >