Search Results

Search found 16911 results on 677 pages for 'top hat'.

Page 636/677 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >

• Getting hp-snmp-agents on HP ProLiant DL360 on Lenny working

  - by mark

  After receiving our HP ProLiant DL360 I'd like to integrate the machine into our Munin system and thus enable ProLiant specific information to be exposed via SNMP. I'm running Debian Lenny with kernel 2.6.26-2-vserver-amd64 . I've followed http://downloads.linux.hp.com/SDR/getting_started.html and the HP repository has been added to /etc/apt/sources.list.d/HP-ProLiantSupportPack.list . Setting up Lenny SNMP itself is not a problem, I configure it to have a public v1 community string to read all data and it works. I install hp-snmp-agents and run hpsnmpconfig and it adds additional lines to the top of /etc/snmp/snmpd.conf : dlmod cmaX /usr/lib64/libcmaX64.so snmpd gets restarted. Via lsof I can see that libcmaX64 was loaded and is used by snmpd, put I do not get any additional information out of snmp. I use snmpwalk -v 1 -c public ... and I can see many OIDs but I do not see the new ones I'd expect, most notably temperatures, fan speed and such. The OIDs I'm expecting are e.g. 1.3.6.1.4.1.232.6.2.6.8.1.4.1 , this is from the existing munin plugins from http://exchange.munin-monitoring.org/plugins/snmp__hp_temp/version/1 . snmpd[19007]: cmaX: Parsing shared as a type was unsucessful snmpd[19007]: cmaX: listening for subagents on port 25375 snmpd[19007]: cmaX: subMIB 1 handler has disconnected snmpd[19007]: cmaX: subMIB 2 handler has disconnected snmpd[19007]: cmaX: subMIB 3 handler has disconnected snmpd[19007]: cmaX: subMIB 5 handler has disconnected snmpd[19007]: cmaX: subMIB 6 handler has disconnected snmpd[19007]: cmaX: subMIB 8 handler has disconnected snmpd[19007]: cmaX: subMIB 9 handler has disconnected snmpd[19007]: cmaX: sent ColdStarts on ports 25376 to 25393 snmpd[19007]: cmaX: subMIB 10 handler has disconnected snmpd[19007]: cmaX: subMIB 11 handler has disconnected snmpd[19007]: cmaX: subMIB 14 handler has disconnected snmpd[19007]: cmaX: subMIB 15 handler has disconnected snmpd[19007]: cmaX: subMIB 16 handler has disconnected snmpd[19007]: cmaX: subMIB 21 handler has disconnected snmpd[19007]: cmaX: subMIB 22 handler has disconnected snmpd[19007]: cmaX: subMIB 23 handler has disconnected snmpd[19007]: cmaX: subMIB 1 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 2 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 3 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 5 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 6 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 8 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 9 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 10 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 11 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 14 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 15 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 16 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 21 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 22 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 23 will be sent on port 25376 to hp Advanced Server Management_Peer snmpd[19007]: cmaX: subMIB 18 handler has disconnected snmpd[19007]: cmaX: subMIB 18 will be sent on port 25393 to cpqnicd snmpd[19007]: NET-SNMP version 5.4.1 This doesn't look particular bad for me, it's just informational I guess. I've compared the walking OID output with and without the module and there's no difference in the OID served back at all. Are there any other prerequisites I'm missing? I've also noticed that from the time I installed hp-snmp-agents it adds a lot of additional daemons and that my load suddenly jumps to 1. I've uninstalled the package for now. Is this expected behavior?

  Read the article

• How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

  - by bgoodr

  I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

  Read the article

• Locating Rogue Perl Script

  - by Gary Garside

  I've been trying to source the location of a perl script which is causing havoc on a server which i control. I'm also trying to find out exactly how this script was installed on the server - my best guess is through a wordpress exploit. The server is a basic web setup running Ubuntu 9.04, Apache and MySQL. I use IPTables for firewall, the site runs around 20 sites and the load never really creeps above 0.7. From what i can see the script is making outbound connection to other servers (most likely trying to brute force entry). Here is a top dump of one of the processes: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22569 www-data 20 0 22784 3216 780 R 100 0.2 47:00.60 perl The command the process is running is /usr/sbin/sshd . I've tried to find an exact file name but im having no luck... i've ran a lsof -p PID and here is the output: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME perl 22569 www-data cwd DIR 8,6 4096 2 / perl 22569 www-data rtd DIR 8,6 4096 2 / perl 22569 www-data txt REG 8,6 10336 162220 /usr/bin/perl perl 22569 www-data mem REG 8,6 26936 170219 /usr/lib/perl/5.10.0/auto/Socket/Socket.so perl 22569 www-data mem REG 8,6 22808 170214 /usr/lib/perl/5.10.0/auto/IO/IO.so perl 22569 www-data mem REG 8,6 39112 145112 /lib/libcrypt-2.9.so perl 22569 www-data mem REG 8,6 1502512 145124 /lib/libc-2.9.so perl 22569 www-data mem REG 8,6 130151 145113 /lib/libpthread-2.9.so perl 22569 www-data mem REG 8,6 542928 145122 /lib/libm-2.9.so perl 22569 www-data mem REG 8,6 14608 145125 /lib/libdl-2.9.so perl 22569 www-data mem REG 8,6 1503704 162222 /usr/lib/libperl.so.5.10.0 perl 22569 www-data mem REG 8,6 135680 145116 /lib/ld-2.9.so perl 22569 www-data 0r FIFO 0,6 157216 pipe perl 22569 www-data 1w FIFO 0,6 197642 pipe perl 22569 www-data 2w FIFO 0,6 197642 pipe perl 22569 www-data 3w FIFO 0,6 197642 pipe perl 22569 www-data 4u IPv4 383991 TCP outsidesoftware.com:56869->server12.34.56.78.live-servers.net:www (ESTABLISHED) My gut feeling is outsidesoftware.com is also under attacK? Or possibly being used as a tunnel. I've managed to find a number of rouge files in /tmp and /var/tmp, here is a brief output of one of these files: #!/usr/bin/perl # this spreader is coded by xdh # xdh@xxxxxxxxxxx # only for testing... my @nickname = ("vn"); my $nick = $nickname[rand scalar @nickname]; my $ircname = $nickname[rand scalar @nickname]; #system("kill -9 `ps ax |grep httpdse |grep -v grep|awk '{print $1;}'`"); my $processo = '/usr/sbin/sshd'; The full file contents can be viewed here: http://pastebin.com/yenFRrGP Im trying to achieve a couple of things here... Firstly i need to stop these processes from running. Either by disabling outbound SSH or any IP Tables rules etc... these scripts have been running for around 36 hours now and my main concern is to stop these things running and respawning by themselves. Secondly i need to try and source where and how these scripts have been installed. If anybody has any advise on what to look for in access logs or anything else i would be really grateful. Thanks in advance

  Read the article

• Problem Disabling Roaming Profiles on Grouped Users

  - by user43207

  I'm having some serious issues getting a group of users to stop using roaming profiles. As expected, I have roaming profiles enabled accross the domain. - But am doing GPO filtering, limiting the scope. I originally had it set to authenticated users for Roaming, but as the domain has branched out to multiple locations, I've limited the scope to only people that are near the central office. The GPO that I have linked filtered to a group I have created that include users that I don't want to have roaming profiles. This GPO is sitting at the root of the domain, with the "Forced" setting enabled, so it should override any setting below it. *On a side note, it is the ONLY GPO that I have set to "Forced" right now. I know the GPO is working, since I can see the original registy settings on a user that logged in under roaming profiles - and then that same user logging in after I made the Group Policy changes, the registry reflects a local profile. But unfortunately, even after making those settings - the user is given a roaming profile on one of the servers. A gpresult of that same user account (after the updated gpo) is listed in the code block below. You can see right at the top of that output, that it is infact dealing with a roaming profile. - And sure enough, on the server that's hosting the file share for roaming profiles, it creates a folder for the user once they log in. For testing purposes, I've deleted all copies of the user's profile, roaming and local. But the problem is still here. - So I'm aparently missing something in the group policy settings on a wider scale. Would anybody be able to point me in the direction of what I'm missing here? *gpresult /r*** Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0 Copyright (C) Microsoft Corp. 1981-2001 Created On 5/15/2010 at 8:59:00 AM RSOP data for ** on * : Logging Mode OS Configuration: Member Workstation OS Version: 6.1.7600 Site Name: N/A Roaming Profile: \\profiles$** Local Profile: C:\Users*** Connected over a slow link?: No USER SETTINGS CN=*****,OU=*****,OU=*****,OU=*****,DC=*****,DC=***** Last time Group Policy was applied: 5/15/2010 at 8:52:02 AM Group Policy was applied from: *****.*****.com Group Policy slow link threshold: 500 kbps Domain Name: USSLINDSTROM Domain Type: Windows 2000 Applied Group Policy Objects ----------------------------- ForceLocalProfilesOnly InternetExplorer_***** GlobalPasswordPolicy The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- DAgentFirewallExceptions Filtering: Denied (Security) WSAdmin_***** Filtering: Denied (Security) NetlogonFirewallExceptions Filtering: Not Applied (Empty) NetLogon_***** Filtering: Denied (Security) WSUSUpdateScheduleManualInstall Filtering: Denied (Security) WSUSUpdateScheduleDaily_0300 Filtering: Denied (Security) WSUSUpdateScheduleThu_0100 Filtering: Denied (Security) AlternateSSLFirewallExceptions Filtering: Denied (Security) SNMPFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleSun_0100 Filtering: Denied (Security) SQLServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleTue_0100 Filtering: Denied (Security) WSUSUpdateScheduleSat_0100 Filtering: Denied (Security) DisableUAC Filtering: Denied (Security) ICMPFirewallExceptions Filtering: Denied (Security) AdminShareFirewallExceptions Filtering: Denied (Security) GPRefreshInterval Filtering: Denied (Security) ServeRAIDFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleFri_0100 Filtering: Denied (Security) BlockFirewallExceptions(8400-8410) Filtering: Denied (Security) WSUSUpdateScheduleWed_0100 Filtering: Denied (Security) Local Group Policy Filtering: Not Applied (Empty) WSUS_***** Filtering: Denied (Security) LogonAsService_Idaho Filtering: Denied (Security) ReportServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleMon_0100 Filtering: Denied (Security) TFSFirewallExceptions Filtering: Denied (Security) Default Domain Policy Filtering: Not Applied (Empty) DenyServerSideRoamingProfiles Filtering: Denied (Security) ShareConnectionsRemainAlive Filtering: Denied (Security) The user is a part of the following security groups --------------------------------------------------- Domain Users Everyone BUILTIN\Users BUILTIN\Administrators NT AUTHORITY\INTERACTIVE CONSOLE LOGON NT AUTHORITY\Authenticated Users This Organization LOCAL *****Users VPNAccess_***** NetAdmin_***** SiteAdmin_***** WSAdmin_***** VPNAccess_***** LocalProfileOnly_***** NetworkAdmin_***** LocalProfileOnly_***** VPNAccess_***** NetAdmin_***** Domain Admins WSAdmin_***** WSAdmin_***** ***** ***** Schema Admins ***** Enterprise Admins Denied RODC Password Replication Group High Mandatory Level

  Read the article

• svnstat script

  - by Kyle Hodgson

  So I'm building out a shell script to check out all of our relevant svn repositories for analysis in svnstat. I've gotten all of this to work manually, now I'm writing up a bash script in cygwin on my Vista laptop, as I intend to move this to a Linux server at some point. Edit: I gave up on this and wrote a simple .bat script. I'll figure out the Linux deployment some other way. Edit: added the sleep 30 and svn log commands. I can tell now, with the svn log command, that it's not getting to the svn log ... this time, it did Applications, and ran the log, and then check out Database, and froze. I'll put the sleep 30 before and after the log this time. co2.sh #!/bin/bash function checkout { mkdir $1 svn checkout svn://dev-server/$1 $1 svn log --verbose --xml >> svn.log $1 sleep 30 } cd /cygdrive/c/Users/My\ User/Documents/Repos/wc checkout Applications checkout Database checkout WebServer/www.mysite.com checkout WebServer/anotherhost.mysite.com checkout WebServer/AnotherApp checkout WebServer/thirdhost.mysite.com checkout WebServer/fourthhost.mysite.com checkout WebServer/WebServices It works, for the most part - but for some reason it has a tendency to stop working after a few repositories, usually right after finishing a repository before going to the next one. When it fails, it will not recover on its own. I've tried commenting out the svn line, it goes in and creates all the directories just fine when I do that - so its not that. I'm looking for direction as well as direct advice. Cygwin has been very stable for me, but I did start using the native rxvt instead of "bash in a cmd.exe window" recently. I don't think that's the problem, as I've left top on remote systems running all night and rxvt didn't seem to mind. Also I haven't done any bash scripting in cygwin so I suppose this might not be recommended; though I can't see why not. I don't want all of WebServer, hence me only checking out certain folders like that. What I suspect is that something is hanging up the svn checkout. Any ideas here? Edit: this time when I hit ctrl+z to cancel out, I forgot I was on Windows and typed ps to see if the job was still running; and as you can see there are lots of svn processes hanging around... strange. Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [1]- Stopped bash co2.sh [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ kill %1 [1]- Stopped bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ [1]- Terminated bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ ps PID PPID PGID WINPID TTY UID STIME COMMAND 7872 1 7872 2340 0 1000 Jun 29 /usr/bin/svn 7752 1 6140 7828 1 1000 Jun 29 /usr/bin/svn 6192 1 5044 2192 1 1000 Jun 30 /usr/bin/svn 7292 1 7452 1796 1 1000 Jun 30 /usr/bin/svn 6236 1 7304 7468 2 1000 Jul 2 /usr/bin/svn 1564 1 5032 7144 2 1000 Jul 2 /usr/bin/svn 9072 1 3960 6276 3 1000 Jul 3 /usr/bin/svn 5876 1 5876 5876 con 1000 11:22:10 /usr/bin/rxvt 924 5876 924 10192 4 1000 11:22:10 /usr/bin/bash 7212 1 7332 5584 4 1000 13:17:54 /usr/bin/svn 9412 1 5480 8840 4 1000 15:38:16 /usr/bin/svn S 8128 924 8128 9452 4 1000 17:38:05 /usr/bin/bash 9132 8128 8128 8172 4 1000 17:43:25 /usr/bin/svn 3512 1 3512 3512 con 1000 17:43:50 /usr/bin/rxvt I 10200 3512 10200 6616 5 1000 17:43:51 /usr/bin/bash 9732 1 9732 9732 con 1000 17:45:55 /usr/bin/rxvt 3148 9732 3148 8976 6 1000 17:45:55 /usr/bin/bash 5856 3148 5856 876 6 1000 17:51:00 /usr/bin/vim 7736 924 7736 8036 4 1000 17:53:26 /usr/bin/ps Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Here's an strace on the PID of the hung svn program, it's been like this for hours. Looks like its just doing nothing. I keep suspecting that some interruption on the server is causing this; does svn have a locking mechanism I'm not aware of? Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ strace -p 7304 ********************************************** Program name: C:\cygwin\bin\svn.exe (pid 7304, ppid 6408) App version: 1005.25, api: 0.156 DLL version: 1005.25, api: 0.156 DLL build: 2008-06-12 19:34 OS version: Windows NT-6.0 Heap size: 402653184 Date/Time: 2009-07-06 18:20:11 **********************************************

  Read the article

• CPU Temperature sensor wrong?

  - by Matias Nino

  Everest Ultimate is suddenly telling me that the CPU temperature (and core temps) for my E6850 Core 2 Duo is 72 degrees Celsius. When I stress-test the machine, the temp goes up to 91 degrees and the CPU actually throttles. System remains stable though. For over a year now, my CPU has run very cool (40's) with a large commercial copper heatsink/fan that I bought separately. To top it off, I removed the cover of the box and felt the cpu heatsink and it wasn't even warm. Is there such a thing as a CPU temp sensor showing the wrong readings? Any tips would help. UPDATE #1 Temp is also just as high in BIOS. So that leads me to believe it's a CPU seating issue (even though I used thermal paste to seat it two years ago when I built the machine) UPDATE #2 Well. I removed the heatsink and cleaned off the original thermal paste (which was somewhat crusty). I polished the surface, re-applied some new paste, and reseated the heat sink. After powering it up, there was no noticeable change in the temp - ideling at 74. Ran the stress test and it went up to 94 degrees before being 100% throttled. I let it sit at 94 degrees for 20 minutes straight and the computer didn't even flinch. I then immediately shut it off and opened the case and felt around. The heatsink was completely cold to the touch. Even the copper rods were cold. The area near contact with the CPU was slightly warm but not hot to touch. Then I ran REALTEMP, which is supposedly more accurate and it told me the CPU was at 104 degrees. (LOL) At this point, I'm thinking no doubt the cpu's sensor is wrong. Sidenote: the BIOS has the latest version so no option to flash there. Reverting hasn't been known to help from what I've read. What pisses me off is the false temps force the CPU to artificially throttle from 3GHz down to 2GHz and my CPU fan is cranking at full force all the time. Should I call intel and tell them to send me another E6850? SOLUTION UPDATE I switched the processor out with another one and got the same obscene temperatures with the new processor followed by a heatsink that was cool to touch. My suspicion in the heatsink was suddenly renewed. I swapped it out with the stock heatsink/fan and lo and behold the temperatures returned to the normal 35C-50C. Even though the thermal paste was visibly flattened out every time I removed it, it looks like the heatsink was still not pressing hard enough on the CPU to effectively conduct the heat. The heatsink is a Masscool 8Wa741, which screws into a standard position on a mount on the back of the MOBO. Only thing I can surmise after 2 years of use was that, over time, the heatsink pressure on the CPU gave way until the heat began to be ineffectively conducted. Lessons learned: Intel CPU's can run SUPER HOT (upwards of 95C) and still be stable. Heatsink's need to be VERY firmly pressed against the CPU to conduct heat.

  Read the article

• How to configure emacs by using this file?

  - by Andy Leman

  From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

  Read the article

• Huge performance difference between two web servers, odd behavior seen using process monitor

  - by Francis Gagnon

  We have two Coldfusion servers that have a huge performance difference running the exact same code on the exact same input data. The code in questions instantiates a large amount of CFCs (Coldfusion Components, which are similar to objects in OOP languages). I compared the two servers by running Process Monitor and then calling the problematic code on both machines. I learned two things. First, Coldfusion opens CFC files every time it instantiates an object. Both servers do this, so it cannot be the cause of the performance difference. Second, the fast server opens the CFC files directly while the server with the performance problem seems to navigate its way through the path until it reaches the desired CFC file. It does this for every file, even the ones it has previously loaded, and because the code instantiates so many CFCs it becomes very slow. See below the partial Promon traces that show this behavior. It can take over 60 seconds for the slow server to do what the fast one does in 2 seconds. Can anyone tell me what causes this behavior? Is it a Coldfusion setting? Since Coldfusion runs on top of Java, is it a Java setting? Is it an OS option? The fast server is running Windows XP and I think the slow server is a Windows Server 2003. Bonus question: Coldfusion doesn't seem to perform any READ FILE operations on any of the CFC or CFM files. How can this be? Sample of the fast server opening CFC files: 11:25:14.5588975 jrun.exe QueryOpen C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5592758 jrun.exe CreateFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5595024 jrun.exe QueryBasicInformationFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5595940 jrun.exe CloseFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5599628 jrun.exe CreateFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5601600 jrun.exe QueryBasicInformationFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc 11:25:14.5602463 jrun.exe CloseFile C:\CF\wwwroot\APP\com\HtmlUtils.cfc Equivalent sample of the slow server opening CFC files: 11:15:08.1249230 jrun.exe CreateFile D:\ 11:15:08.1250100 jrun.exe QueryDirectory D:\org 11:15:08.1252852 jrun.exe CloseFile D:\ 11:15:08.1259670 jrun.exe CreateFile D:\org 11:15:08.1260319 jrun.exe QueryDirectory D:\org\cli 11:15:08.1260769 jrun.exe CloseFile D:\org 11:15:08.1269451 jrun.exe CreateFile D:\org\cli 11:15:08.1270613 jrun.exe QueryDirectory D:\org\cli\cpn 11:15:08.1271140 jrun.exe CloseFile D:\org\cli 11:15:08.1279312 jrun.exe CreateFile D:\org\cli\cpn 11:15:08.1280086 jrun.exe QueryDirectory D:\org\cli\cpn\APP 11:15:08.1280789 jrun.exe CloseFile D:\org\cli\cpn 11:15:08.1291034 jrun.exe CreateFile D:\org\cli\cpn\APP 11:15:08.1291709 jrun.exe QueryDirectory D:\org\cli\cpn\APP\com 11:15:08.1292224 jrun.exe CloseFile D:\org\cli\cpn\APP 11:15:08.1300568 jrun.exe CreateFile D:\org\cli\cpn\APP\com 11:15:08.1301321 jrun.exe QueryDirectory D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1301843 jrun.exe CloseFile D:\org\cli\cpn\APP\com 11:15:08.1312049 jrun.exe CreateFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1314409 jrun.exe QueryBasicInformationFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1314633 jrun.exe CloseFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1315881 jrun.exe CreateFile D:\ 11:15:08.1316379 jrun.exe QueryDirectory D:\org 11:15:08.1316926 jrun.exe CloseFile D:\ 11:15:08.1330951 jrun.exe CreateFile D:\org 11:15:08.1338656 jrun.exe QueryDirectory D:\org\cli 11:15:08.1339118 jrun.exe CloseFile D:\org 11:15:08.1526468 jrun.exe CreateFile D:\org\cli 11:15:08.1527295 jrun.exe QueryDirectory D:\org\cli\cpn 11:15:08.1527989 jrun.exe CloseFile D:\org\cli 11:15:08.1531977 jrun.exe CreateFile D:\org\cli\cpn 11:15:08.1532589 jrun.exe QueryDirectory D:\org\cli\cpn\APP 11:15:08.1533575 jrun.exe CloseFile D:\org\cli\cpn 11:15:08.1538457 jrun.exe CreateFile D:\org\cli\cpn\APP 11:15:08.1539083 jrun.exe QueryDirectory D:\org\cli\cpn\APP\com 11:15:08.1539553 jrun.exe CloseFile D:\org\cli\cpn\APP 11:15:08.1544126 jrun.exe CreateFile D:\org\cli\cpn\APP\com 11:15:08.1544980 jrun.exe QueryDirectory D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1545482 jrun.exe CloseFile D:\org\cli\cpn\APP\com 11:15:08.1551034 jrun.exe CreateFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1552878 jrun.exe QueryBasicInformationFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc 11:15:08.1553044 jrun.exe CloseFile D:\org\cli\cpn\APP\com\HtmlUtils.cfc Thanks

  Read the article

• AdPrep logs show an LDAP error

  - by Omar

  What I am trying to do is transition our domain from Server 2003 Enterprise x32 to Server 2008 R2 Enterprise x64. Here is what I have done thus far. The 2003 server is a physical machine, the 2008 server is a virtual machine Built a virtual machine that has Server 2008 R2 Enterprise x64 and joined it to the domain as a domain member On the 2003 DC, Raised Domain Functional Level and Forest Functional Level to Windows Server 2003 On the 2003 DC, went into the registry and navigated to HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters and verified that the Schema Version is 30 On the 2003 DC, inserted the Windows Server 2008 Enterprise x32 Edition to copy over the adprep folder. This version is the only one that seemed to work On the 2003 DC, opened command prompt and went to adprep directory and ran adprep /forestprep , adprep /domainprep , and adprep /domainprep /gpprep On the 2008 server, Installed the Active Directory Domain Services role from Server Manager On the 2003 DC, went into the registry and navigated to HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters and verified that the Schema Version is now 44 When I go to run dcpromo on the 2008 server, I get a message that says: "To install a domain controller into this Active Directory forest, you must first prepare using adprep /forestprep" I went back to the 2003 DC server and went through the adprep logs and I came across this: Adprep was unable to modify the security descriptor on object CN=DomainControllerAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. [Status/Consequence] ADPREP was unable to merge the existing security descriptor with the new access control entry (ACE). [User Action] Check the log file ADPrep.log in the C:\WINDOWS\debug\adprep\logs\20100327143517 directory for more information. Adprep encountered an LDAP error. *Error code: 0x20. Server extended error code: 0x208d, Server error message: 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of: 'CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com* In fact, I got three of these errors. The LDAP error is consistent with all three, but the top part where it says "Adprep was unable to modify the security descriptor on object" are different. They are the following: CN=DomainControllerAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. CN=DirectoryEmailReplication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. CN=KerberosAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. The credentials I am using on the 2008 server when running dcpromo is my domain account. My account is part of the domain and enterprise admin groups. I've tried various quick fixes that I've came across through Google searches that include: Disabling AntiVirus on current DCs Pointing DNS on PDC to point to itself Changing the Schema Update Allowed key to 1 and tried rerunning adprep - when rerunning adprep, told me that Forest-wide information has already been updated Disabled Windows Firewall on the Server 2008 box On the 2003 DC, went to Domain Controller Security Policy Local Policies User Rights Assignment and added Domain Admins to the Enable computer and user accounts to be trusted for delegation policy setting Both our PDC and BDC are Global Catalog Servers. Not sure if this matters or not I ran the command netdom query fsmo and verified that the FSMO role holder is the current 2003 PDC I ran dcdiag /v on the 2003 PDC and the only thing that failed was Services. Dnscache Service is stopped on the PDC I even went as far as deleting the virtual machine and recreating it from scratch - no avail... Help :(

  Read the article

• How do I achieve lossless JPEG joining without truncation of partial MCUs?

  - by Karan

  I am working on a project for which I need to join thousands of JPEG images losslessly (I'm not talking about the Lossless JPEG/JPEG 2000/JPEG-LS formats here). Aforementioned images have varying levels of chroma subsampling (1x1, 1x2, 2x1, 2x2), resulting in varying MCU sizes (8x8, 8x16, 16x8, 16x16 px). However, in any given set of images to be joined together, each image has identical characteristics. For now, let's assume I only have 2 images. Image #1 (I1) is 256x256px in size and #2 (I2) is 239x256px in size. 2x2 subsampling is used such that MCU size is 16x16px. I2 thus obviously has partial MCUs at the right edge, since its width is not evenly divisible by 16. (I've read that so-called 'partial' MCUs actually contain the data for a complete MCU, but the image dimensions instruct the renderer to only display the relevant pixels and ignore/hide the extra ones.) Looking around for tools that could help me accomplish this, I came across a modified version of JpegTran, that contains an experimental lossless crop 'n' drop (cut & paste) feature. All the other apps I encountered that support lossless JPEG editing seem to utilise IJG's (JpegTran) code, so this seemed to be the logical choice. Also, given the sheer number of images, I wanted something that could preferably be run from the command-line so that I could automate the process with a script. Unfortunately, while everything else worked fine, it seems JpegTran truncates the partial MCUs instead of retaining them. Thus in the example above, the final joined image contains all of I1, but only 224x256px of I2. Why 224? because 239 = 14x16+15, which means there are 14 full MCUs along the width, and 1 partial MCU (just 1px short of the complete 16px). The last 15px is what is getting blanked, leading to a 495x256px image with 15px of blank (grey) pixels at the right edge. See images below (shame that imgur re-compresses them): (left )+ (right) = As you can clearly see, the red portion (15px) of I2 has been truncated by JpegTran. If the MCUs were 8px in width, the lost portion would have been the right-most 7px of I2. Similarly, joining I3 (256x239px) *below * I1 would cause the loss of 7 or 15px, depending on the MCU height of course: (top) + (bottom) = If this is better suited to some other StackExchange (or even non-SE) site/forum where JPEG/image encoding experts hang out, do let me know. Can what I am attempting even be done, or is the so-called 'lossless' JPEG crop 'n' drop only valid for images with no partial MCUs? (Maybe that is why the feature is still in an "experimental state" more than a decade after being introduced...) Until I know for sure that it is impossible, I am not interested in suggestions for lossy joining. Avoiding any generational loss whatsoever is the sole reason why I'm breaking my head over this, else I'd have had this done and dusted ages ago. Also, I am not interested in suggestions related to switching image formats. I do not control the source of the images. If it can be done, how? Please keep in mind that any alternate apps suggested must ideally be capable of automation, given the requirements stated above. (But given how it's unlikely I'm even going to receive a useful answer given the constraints, I would be happy with any app suggestion just as long as it actually works. I can always look into an AutoIT/AHK script or something later to automate it.) I understand that an odd-sized final image might cause issues, so I am fully prepared to accept any solution, even if it results in blank (preferably black) padding pixels to the right/bottom. What I mean is, I don't care if I1 + I2 is 496x256px (1px padding) or even 512x256px (17px padding) in size, as long as the final image contains all the actual image data from both source images, and the entire process is lossless. Obviously the lesser the padding (if any), the better, but at this point any solution will do. A Windows-based solution would be perfect, but a Linux-based one would be entirely acceptable.

  Read the article

• django, mod_wsgi, MySQL High CPU - Problems

  - by Red Rover

  I am having a problem with an OSQA site. It is Django/Apache/mod_wsgi configured site. Every hour, the CPU spikes to 164% (Average) for task HTTPD. After 10 minutes, it frees back up. I have reviewed the logs, cron tables, made many config changes, but cannot track this problem down. Can someone please look at the information below and let me know if it is a configuration problem, or if anyone else has experienced this issue. Running TOP shows HTTPD using 165% of CPU VMware performance monitor also displays spikes. This happens every hour for 10 minutes. I have the following information from server status Server Version: Apache/2.2.15 (Unix) DAV/2 mod_wsgi/3.2 Python/2.6.6 Server Built: Feb 7 2012 09:50:15 Current Time: Sunday, 10-Jun-2012 21:44:29 EDT Restart Time: Sunday, 10-Jun-2012 19:44:51 EDT Parent Server Generation: 0 Server uptime: 1 hour 59 minutes 37 seconds Total accesses: 1088 - Total Traffic: 11.5 MB CPU Usage: u80.26 s243.8 cu0 cs0 - 4.52% CPU load .152 requests/sec - 1682 B/second - 10.8 kB/request 4 requests currently being processed, 11 idle workers ....._..........__......W....................................... ...................................C._..._....._L__._L_._....... ...................... Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process Srv PID Acc M CPU SS Req Conn Child Slot Client VHost Request 0-0 - 0/0/34 . 0.42 327 17 0.0 0.00 0.67 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 1-0 - 0/0/22 . 0.31 339 32 0.0 0.00 0.26 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 2-0 - 0/0/22 . 0.65 358 10 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 3-0 - 0/0/31 . 1.03 378 31 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 4-0 - 0/0/20 . 0.45 356 9 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 5-0 18852 0/16/34 _ 0.98 27 18120 0.0 0.37 0.62 69.180.250.36 osqa.informs.org GET /questions/289/what-is-the-difference-between-operations-re 6-0 - 0/0/32 . 0.94 309 29 0.0 0.00 0.64 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 7-0 - 0/0/31 . 1.15 382 32 0.0 0.00 0.75 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 8-0 - 0/0/21 . 0.28 403 19 0.0 0.00 0.20 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 9-0 - 0/0/32 . 1.37 288 16 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 10-0 - 0/0/33 . 1.72 383 16 0.0 0.00 0.40 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 I am running Django 1.3 This is a mod_wsgi configuration and copied is the wsgi.conf file: <IfModule !python_module> <IfModule !wsgi_module> LoadModule wsgi_module modules/mod_wsgi.so <IfModule wsgi_module> <Directory /var/www/osqa> Order allow,deny Allow from all #Deny from all </Directory> WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess OSQA maximum-requests=10000 WSGIProcessGroup OSQA Alias /admin_media/ /usr/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/contrib/admin/media/ Alias /m/ /var/www/osqa/forum/skins/ Alias /upfiles/ /var/www/osqa/forum/upfiles/ <Directory /var/www/osqa/forum/skins> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /var/www/osqa/osqa.wsgi </IfModule> </IfModule> </IfModule> This is the httpd.conf file Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 MaxKeepAliveRequests 400 KeepAliveTimeout 3 <IfModule prefork.c> Startservers 15 MinSpareServers 10 MaxSpareServers 20 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 0 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> We are using MySQL The server is an ESX4i, configured for the VM to use 4 CPUs and 8 GB Ram. Hyper threading is enabled, 2 physical CPU's, with 4 Logical. the CPU are Intel Xeon 2.8 GHz. Total memory is 12GB

  Read the article

• Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a new account

  - by TrevJen

  Sharepoint 2007 MOSS with AD imported users. All servers are 2008. ***UPDATE More details in testing. This Sharepoint is in an AD Child domain (clients.mycompany.local), which is sub to the root of the AD tree (mycompany.local). The user is in the parent tree (as are half of the other functional users. I have elevated the user rights to Domain. In looking at the logs, it seems that the Sharepoint server is trying to authenticate them by querying the DC for the clients domain (which is the way it normally works and still works for all existing identically configured users). I think if I could force it to authenticate up to the top domain DC then it would be ok?? I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. Logs by request from matt b Office SharePoint Server Date: 4/13/2010 2:00:00 PM Event ID: 7888 Task Category: Office Server General Level: Error Keywords: Classic User: N/A Computer: nb-portal-01.clients.netboundary.local Description: A runtime exception was detected. Details follow. Message: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) – TrevJen 19 hours ago Techinal Details: System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed) – TrevJen 19 hours ago at Microsoft.SharePoint.SPField.Update() at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.UserSynchronizer.PushSchemaToList(Boolean& bAddedColumn) at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.UserSynchronizer.SynchFull() at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.Synch() at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock) – TrevJen 19 hours ago Log Name: Application Source: Office SharePoint Server Date: 4/13/2010 2:00:00 PM Event ID: 5553 Task Category: User Profiles Level: Error Keywords: Classic User: N/A Computer: nb-portal-01.clients.netboundary.local Description: failure trying to synch site 6fea15e2-0899-4c19-9016-44d77834c018 for ContentDB b2002b0b-3d4c-411a-8c4f-3d047ca9322c WebApp 3aff7051-455d-4a70-a377-5b1c36df618e. Exception message was Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)). – TrevJen 18 hours ago

  Read the article

• Having problems with high CPU usage and apparent memory leak of Exim

  - by Dancrumb

  I'm having problems with my server and am hoping you can help. The culprit appears to be exim. The CPU usage is consistently high and the memory usage trends up and up and up for no apparent reason (this is not a heavily used server). To demonstrate the issue, I ran the following: root@server [/var/log]# service exim restart; for iter in `seq 0 9`; do date; top -n1 | grep exim; sleep 10; done Shutting down exim: [ OK ] Shutting down spamd: [ OK ] Starting exim: [ OK ] Sun Jun 6 18:12:07 CDT 2010 62592 root 25 0 11400 6572 2356 R 51.5 1.3 0:00.92 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim Sun Jun 6 18:12:18 CDT 2010 62592 root 25 0 28768 23m 2356 R 57.4 4.6 0:06.75 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:28 CDT 2010 62592 root 25 0 36408 30m 2356 R 55.5 6.0 0:12.59 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:39 CDT 2010 62592 root 25 0 41396 35m 2356 R 53.5 7.0 0:18.35 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:49 CDT 2010 62592 root 25 0 45868 40m 2356 R 47.5 7.8 0:24.06 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:00 CDT 2010 62592 root 25 0 50056 44m 2356 R 55.3 8.6 0:29.84 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:10 CDT 2010 62592 root 25 0 53888 47m 2356 R 55.2 9.4 0:35.63 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:21 CDT 2010 62592 root 20 0 56920 50m 2356 R 55.3 9.9 0:41.15 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:31 CDT 2010 62592 root 25 0 60380 54m 2356 R 53.4 10.6 0:46.98 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:42 CDT 2010 62592 root 22 0 63400 57m 2356 R 49.5 11.2 0:52.74 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim After some time, it gets to a rate of picking up an extra MB every 10s. I've checked the exim logs and there are no messages coming in there. exim -bV shows: Exim version 4.69 #1 built 16-Mar-2009 14:44:43 Copyright (c) University of Cambridge 2006 Berkeley DB: Sleepycat Software: Berkeley DB 4.2.52: (February 22, 2005) Support for: crypteq iconv() IPv6 PAM Perl OpenSSL Content_Scanning Old_Demime Experimental_SPF Experimental_SRS Experimental_DomainKeys Lookups: lsearch wildlsearch nwildlsearch iplsearch dbm dbmnz passwd Authenticators: cram_md5 dovecot plaintext spa Routers: accept dnslookup ipliteral manualroute queryprogram redirect Transports: appendfile/maildir autoreply pipe smtp Size of off_t: 8 Configuration file is /etc/exim.conf I'm at something of a loss as to how to proceed. Any recommendations would be well received!

  Read the article

• Synergy 1.4.2 Linux server, OSX client, Media/Function key mapping issues

  - by at165dB

  I'm using an Apple bluetooth keybord to control my Linux synergy server. SSH tunneling, Mouse, Keyboard, and Copy&Paste all work. Linux sees all the media/app keys that are on top of the F# keys correctly. However if I press any of those keys while controlling my OSX client, nothing happens on the client. Running synergys with -d DEBUG1 I can see the following keycode info: Pressing the "dim monitor" key that also serves as F1 generates: new mask: 0x2000 event: KeyPress code=232, state=0x0010 new mask: 0x2000 If I press "fn" and the same key, I can see it sending what I'm assuming is an F1: event: KeyPress code=67, state=0x0010 onKeyDown id=61374 mask=0x2000 button=0x0043 send key down to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 new mask: 0x2000 event: KeyRelease code=67, state=0x0010 onKeyUp id=61374 mask=0x2000 button=0x0043 send key up to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 I'm guessing I need to tweak my synergy.conf so that the server sends keys that it currently isn't. I'm also not sure what I need to do to tweak the keys that it is sending, but are not working. Below are all the other keys I'm having issues with. Does anyone have any idea how I can enable their functionality? brighten monitor: new mask: 0x2000 event: KeyPress code=233, state=0x0010 new mask: 0x2000 expose: new mask: 0x2000 event: KeyPress code=128, state=0x0010 new mask: 0x2000 dashboard: new mask: 0x2000 event: KeyPress code=212, state=0x0010 new mask: 0x2000 dim keyboard: new mask: 0x2000 event: KeyPress code=237, state=0x0010 new mask: 0x2000 brighten keyboard: new mask: 0x2000 event: KeyPress code=238, state=0x0010 new mask: 0x2000 rewind: event: KeyPress code=173, state=0x0010 onKeyDown id=57521 mask=0x2000 button=0x00ad send key down to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad new mask: 0x2000 event: KeyRelease code=173, state=0x0010 onKeyUp id=57521 mask=0x2000 button=0x00ad send key up to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad play/pause: event: KeyPress code=172, state=0x0010 onKeyDown id=57523 mask=0x2000 button=0x00ac send key down to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac new mask: 0x2000 event: KeyRelease code=172, state=0x0010 onKeyUp id=57523 mask=0x2000 button=0x00ac send key up to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac fastforward: event: KeyPress code=171, state=0x0010 onKeyDown id=57520 mask=0x2000 button=0x00ab send key down to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab new mask: 0x2000 event: KeyRelease code=171, state=0x0010 onKeyUp id=57520 mask=0x2000 button=0x00ab send key up to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab mute: event: KeyPress code=121, state=0x0010 onKeyDown id=57517 mask=0x2000 button=0x0079 send key down to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 new mask: 0x2000 event: KeyRelease code=121, state=0x0010 onKeyUp id=57517 mask=0x2000 button=0x0079 send key up to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 volume down: onKeyDown id=57518 mask=0x2000 button=0x007a send key down to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a new mask: 0x2000 event: KeyRelease code=122, state=0x0010 onKeyUp id=57518 mask=0x2000 button=0x007a send key up to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a volume up: event: KeyPress code=123, state=0x0010 onKeyDown id=57519 mask=0x2000 button=0x007b send key down to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b new mask: 0x2000 event: KeyRelease code=123, state=0x0010 onKeyUp id=57519 mask=0x2000 button=0x007b send key up to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b eject: event: KeyPress code=169, state=0x0010 onKeyDown id=57345 mask=0x2000 button=0x00a9 send key down to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9 new mask: 0x2000 event: KeyRelease code=169, state=0x0010 onKeyUp id=57345 mask=0x2000 button=0x00a9 send key up to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9

  Read the article

• Blocking 'good' bots in nginx with multiple conditions for certain off-limits URL's where humans can go

  - by Glenn Plas

  After 2 days of searching/trying/failing I decided to post this here, I haven't found any example of someone doing the same nor what I tried seems to be working OK. I'm trying to send a 403 to bots not respecting the robots.txt file (even after downloading it several times). Specifically Googlebot. It will support the following robots.txt definition. User-agent: * Disallow: /*/*/page/ The intent is to allow Google to browse whatever they can find on the site but return a 403 for the following type of request. Googlebot seems to keep on nesting these links eternally adding paging block after block: my_domain.com:80 - 66.x.67.x - - [25/Apr/2012:11:13:54 +0200] "GET /2011/06/ page/3/?/page/2//page/3//page/2//page/3//page/2//page/2//page/4//page/4//pag e/1/&wpmp_switcher=desktop HTTP/1.1" 403 135 "-" "Mozilla/5.0 (compatible; G ooglebot/2.1; +http://www.google.com/bot.html)" It's a wordpress site btw. I don't want those pages to show up, even though after the robots.txt info got through, they stopped for a while only to begin crawling again later. It just never stops .... I do want real people to see this. As you can see, google get a 403 but when I try this myself in a browser I get a 404 back. I want browsers to pass. root@my_domain:# nginx -V nginx version: nginx/1.2.0 I tried different approaches, using a map and plain old nono if's and they both act the same: (under http section) map $http_user_agent $is_bot { default 0; ~crawl|Googlebot|Slurp|spider|bingbot|tracker|click|parser|spider 1; } (under the server section) location ~ /(\d+)/(\d+)/page/ { if ($is_bot) { return 403; # Please respect the robots.txt file ! } } I recently had to polish up my Apache skills for a client where I did about the same thing like this : # Block real Engines , not respecting robots.txt but allowing correct calls to pass # Google RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ Googlebot/2\.[01];\ \+http://www\.google\.com/bot\.html\)$ [NC,OR] # Bing RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ bingbot/2\.[01];\ \+http://www\.bing\.com/bingbot\.htm\)$ [NC,OR] # msnbot RewriteCond %{HTTP_USER_AGENT} ^msnbot-media/1\.[01]\ \(\+http://search\.msn\.com/msnbot\.htm\)$ [NC,OR] # Slurp RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ Yahoo!\ Slurp;\ http://help\.yahoo\.com/help/us/ysearch/slurp\)$ [NC] # block all page searches, the rest may pass RewriteCond %{REQUEST_URI} ^(/[0-9]{4}/[0-9]{2}/page/) [OR] # or with the wpmp_switcher=mobile parameter set RewriteCond %{QUERY_STRING} wpmp_switcher=mobile # ISSUE 403 / SERVE ERRORDOCUMENT RewriteRule .* - [F,L] # End if match This does a bit more than I asked nginx to do but it's about the same principle, I'm having a hard time figuring this out for nginx. So my question would be, why would nginx serve my browser a 404 ? Why isn't it passing, The regex isn't matching for my UA: "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.30 Safari/536.5" There are tons of example to block based on UA alone, and that's easy. It also looks like the matchin location is final, e.g. it's not 'falling' through for regular user, I'm pretty certain that this has some correlation with the 404 I get in the browser. As a cherry on top of things, I also want google to disregard the parameter wpmp_switcher=mobile , wpmp_switcher=desktop is fine but I just don't want the same content being crawled multiple times. Even though I ended up adding wpmp_switcher=mobile via the google webmaster tools pages (requiring me to sign up ....). that also stopped for a while but today they are back spidering the mobile sections. So in short, I need to find a way for nginx to enforce the robots.txt definitions. Can someone shell out a few minutes of their lives and push me in the right direction please ? I really appreciate ANY response that makes me think harder ;-)

  Read the article

• Magento hosting on a budget

  - by spa

  I have to do a setup for Magento. My constraint is primarily ease of setup and fault tolerance/fail over. Furthermore costs are an issue. I have three identical physical servers to get the job done. Each server node has an i7 quad core, 16GB RAM, and 2x3TB HD in a software RAID 1 configuration. Each node runs Ubuntu 12.04. right now. I have an additional IP address which can be routed to any of these nodes. The Magento shop has max. 1000 products, 50% of it are bundle products. I would estimate that max. 100 users are active at once. This leads me to the conclusion, that performance is not top priority here. My first setup idea One node (lb) runs nginx as a load balancer. The additional IP is used with domain name and routed to this node by default. Nginx distributes the load equally to the other two nodes (shop1, shop2). Shop1 and shop2 are configured equally: each server runs Apache2 and MySQL. The Mysqls are configured with master/slave replication. My failover strategy: Lb fails = Route IP to shop1 (MySQL master), continue. Shop1 fails = Lb will handle that automatically, promote MySQL slave on shop2 to master, reconfigure Magento to use shop2 for writes, continue. Shop2 fails = Lb will handle that automatically, continue. Is this a sane strategy? Has anyone done a similar setup with Magento? My second setup idea Another way to do it would be to use drbd for storing the MySQL data files on shop1 and shop2. I understand that in this scenario only one node/MySQL instance can be active and the other is used as hot standby. So in case shop1 fails, I would start up MySQL on shop2, route the IP to shop2, and continue. I like that as the MySQL setup is easier and the nodes can be configured 99% identical. So in this case the load balancer becomes useless and I have a spare server. My third setup idea The third way might be master-master replication of MySQL databases. However, in my optinion this might be tricky, as Magento isn't build for this scenario (e.g. conflicting ids for new rows). I would not do that until I have heard of a working example. Could you give me an advice which route to follow? There seems not one "good" way to do it. E.g. I read blog posts which describe a MySQL master/slave setup for Magento, but elsewhere I read, that data might get duplicated when the slave lags behind the master (e.g. when an order is placed, a customer might get created twice). I'm kind of lost here.

  Read the article

• Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

  - by Mike C

  I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

  Read the article

• TV not detected by Windows/VGA - when there is a WHDI device in the signal chain

  - by ashwalk

  I'm at my wit's end with this one... I had an EVGA GTS 250, and I used to plug it's HDMI out into a WHDI sender, which transmitted to its corresponding WHDI receiver 15ft away, which then connected to a Samsung LN40D LCD TV through another HDMI cable. PC/VGA < [hdmi cable] < WHDI sender <[air] WHDI receiver < [hdmi cable] < TV It was perfect, stable, no perceivable latency. I just plugged everything the first time and it worked instantly. It sent 5.1 audio, and Windows/nVidia Control Center detected the TV by its name. The WHDI device is this one: http://goo.gl/Q8iWI5 Now I bought an EVGA GTX 650, and WHDI doesn't work anymore. Both Windows and nVidia Control Center won't detect the TV, only the monitor that's connected via DVI. The TV screen shows "TX202913 connected. Check video signal." on top of a black screen. Though the device is not the problem itself, just the fact that it's not allowing direct connection between PC and TV. I would bet that if put an AVR in its place I'd also have this issue. The HDMI on this new card works with other monitors. If I put the older card back, WHDI works normally. I have googled this for 5 months on and off. Once I bumped into a page that showed how to force a display device to always-on through registry edit. Once I restarted windows, the Tv (through WHDI) displayed my expanded or duplicated desktop at 1024x768 ONLY, and listed the display as "digital display". I could not change the resolution and it wouldn't playback audio (although the option was available at nVidia Control Center HDMI audio options, but did not work). This proves that there is no conflict between the devices, except that software-wise, Windows cannot, for the life of it, understand that there's a TV there to send video/audio to. Since this won't do (no audio, poor video), I reverted this regedit. It's also not an EDID problem within the TV, since when connected directly it works. The last weird bit of this saga is that today, I reminded of Windows' "Add Device" dialog, gave it a go, and a "Samsung Generic UPNP TV" showed up, which I promptly installed the drives for, rising to a climax of... ...NOTHING HAPPENING. As far as I can tell, it really didn't change anything other than using up a few kb in my main disc. I should also say that I looked a LOT into handshake problems and nothing applied either. Do any of you have an idea of what may be going on? I can't stand the thought of having a us$200 device not working because of the addition of a newer graphics card, when the much older one had no issues. There is absolutely NO REASON for this to happen. There is NO documentation on WHDI online. Apparently no one buys this stuff. For the same reason, no one responded to this same plea for help on NVidia and EVGA forums. Worst case, this can be a warning about this setup for people in the future. Thanx in advance.

  Read the article

• rsyslogd not monitoring all files

  - by Tom O'Connor

  So.. I've installed Logstash, and instead of using the logstash shipper (because it needs the JVM and is generally massive), I'm using rsyslogd with the following configuration. # Use traditional timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $IncludeConfig /etc/rsyslog.d/*.conf # Provides kernel logging support (previously done by rklogd) $ModLoad imklog # Provides support for local system logging (e.g. via logger command) $ModLoad imuxsock # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none;local6.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log In /etc/rsyslog.d/logstash.conf there are 28 file monitor blocks using imfile $ModLoad imfile # Load the imfile input module $ModLoad imklog # for reading kernel log messages $ModLoad imuxsock # for reading local syslog messages $InputFileName /var/log/rabbitmq/startup_err $InputFileTag rmq-err: $InputFileStateFile state-rmq-err $InputFileFacility local6 $InputRunFileMonitor .... $InputFileName /var/log/some.other.custom.log $InputFileTag cust-log: $InputFileStateFile state-cust-log $InputFileFacility local6 $InputRunFileMonitor .... *.* @@10.90.0.110:5514 There are 28 InputFileMonitor blocks, each monitoring a different custom application logfile.. If I run [root@secret-gm02 ~]# lsof|grep rsyslog rsyslogd 5380 root cwd DIR 253,0 4096 2 / rsyslogd 5380 root rtd DIR 253,0 4096 2 / rsyslogd 5380 root txt REG 253,0 278976 1015955 /sbin/rsyslogd rsyslogd 5380 root mem REG 253,0 58400 1868123 /lib64/libgcc_s-4.1.2-20080825.so.1 rsyslogd 5380 root mem REG 253,0 144776 1867778 /lib64/ld-2.5.so rsyslogd 5380 root mem REG 253,0 1718232 1867780 /lib64/libc-2.5.so rsyslogd 5380 root mem REG 253,0 23360 1867787 /lib64/libdl-2.5.so rsyslogd 5380 root mem REG 253,0 145872 1867797 /lib64/libpthread-2.5.so rsyslogd 5380 root mem REG 253,0 85544 1867815 /lib64/libz.so.1.2.3 rsyslogd 5380 root mem REG 253,0 53448 1867801 /lib64/librt-2.5.so rsyslogd 5380 root mem REG 253,0 92816 1868016 /lib64/libresolv-2.5.so rsyslogd 5380 root mem REG 253,0 20384 1867990 /lib64/rsyslog/lmnsd_ptcp.so rsyslogd 5380 root mem REG 253,0 53880 1867802 /lib64/libnss_files-2.5.so rsyslogd 5380 root mem REG 253,0 23736 1867800 /lib64/libnss_dns-2.5.so rsyslogd 5380 root mem REG 253,0 20768 1867988 /lib64/rsyslog/lmnet.so rsyslogd 5380 root mem REG 253,0 11488 1867982 /lib64/rsyslog/imfile.so rsyslogd 5380 root mem REG 253,0 24040 1867983 /lib64/rsyslog/imklog.so rsyslogd 5380 root mem REG 253,0 11536 1867987 /lib64/rsyslog/imuxsock.so rsyslogd 5380 root mem REG 253,0 13152 1867989 /lib64/rsyslog/lmnetstrms.so rsyslogd 5380 root mem REG 253,0 8400 1867992 /lib64/rsyslog/lmtcpclt.so rsyslogd 5380 root 0r REG 0,3 0 4026531848 /proc/kmsg rsyslogd 5380 root 1u IPv4 1200589517 0t0 TCP 10.10.10.90 t:40629->10.10.10.90:5514 (ESTABLISHED) rsyslogd 5380 root 2u IPv4 1200589527 0t0 UDP *:45801 rsyslogd 5380 root 3w REG 253,3 17999744 2621483 /var/log/messages rsyslogd 5380 root 4w REG 253,3 13383 2621484 /var/log/secure rsyslogd 5380 root 5w REG 253,3 7180 2621493 /var/log/maillog rsyslogd 5380 root 6w REG 253,3 43321 2621529 /var/log/cron rsyslogd 5380 root 7w REG 253,3 0 2621494 /var/log/spooler rsyslogd 5380 root 8w REG 253,3 0 2621495 /var/log/boot.log rsyslogd 5380 root 9r REG 253,3 1064271998 2621464 /var/log/custom-application.monolog.log rsyslogd 5380 root 10u unix 0xffff81081fad2e40 0t0 1200589511 /dev/log You can see that there are nowhere near 28 logfiles actually being read. I really had to get one file monitored, so I moved it to the top, and it picked it up, but I'd like to be able to monitor all 28+ files, and not have to worry. OS is Centos 5.5 Kernel 2.6.18-308.el5 rsyslogd 3.22.1, compiled with: FEATURE_REGEXP: Yes FEATURE_LARGEFILE: Yes FEATURE_NETZIP (message compression): Yes GSSAPI Kerberos 5 support: Yes FEATURE_DEBUG (debug build, slow code): No Atomic operations supported: Yes Runtime Instrumentation (slow code): No Questions: Why is rsyslogd only monitoring a very small subset of the files? How can I fix this so that all the files are monitored?

  Read the article

• MySQL Memory usage

  - by Rob Stevenson-Leggett

  Our MySQL server seems to be using a lot of memory. I've tried looking for slow queries and queries with no index and have halved the peak CPU usage and Apache memory usage but the MySQL memory stays constantly at 2.2GB (~51% of available memory on the server). Here's the graph from Plesk. Running top in the SSH window shows the same figures. Does anyone have any ideas on why the memory usage is constant like this and not peaks and troughs with usage of the app? Here's the output of the MySQL Tuning Primer script: -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.0.77-log x86_64 Uptime = 1 days 14 hrs 4 min 21 sec Avg. qps = 22 Total Questions = 3059456 Threads Connected = 13 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1 sec. You have 6 out of 3059477 that take longer than 1 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is NOT enabled. You will not be able to do point in time recovery See http://dev.mysql.com/doc/refman/5.0/en/point-in-time-recovery.html WORKER THREADS Current thread_cache_size = 0 Current threads_cached = 0 Current threads_per_sec = 2 Historic threads_per_sec = 0 Threads created per/sec are overrunning threads cached You should raise thread_cache_size MAX CONNECTIONS Current max_connections = 100 Current threads_connected = 14 Historic max_used_connections = 20 The number of used connections is 20% of the configured maximum. Your max_connections variable seems to be fine. INNODB STATUS Current InnoDB index space = 6 M Current InnoDB data space = 18 M Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 8 M Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 2.07 G Configured Max Per-thread Buffers : 274 M Configured Max Global Buffers : 2.01 G Configured Max Memory Limit : 2.28 G Physical Memory : 3.84 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 4 M Current key_buffer_size = 7 M Key cache miss rate is 1 : 40 Key buffer free ratio = 81 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is supported but not enabled Perhaps you should set the query_cache_size SORT OPERATIONS Current sort_buffer_size = 2 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 132.00 K You have had 16 queries where a join could not use an index properly You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. If you are unable to optimize your queries you may want to increase your join_buffer_size to accommodate larger joins in one pass. Note! This script will still suggest raising the join_buffer_size when ANY joins not using indexes are found. OPEN FILES LIMIT Current open_files_limit = 1024 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_cache value = 64 tables You have a total of 426 tables You have 64 open tables. Current table_cache hit rate is 1% , while 100% of your table cache is in use You should probably increase your table_cache TEMP TABLES Current max_heap_table_size = 16 M Current tmp_table_size = 32 M Of 15134 temp tables, 9% were created on disk Effective in-memory tmp_table_size is limited to max_heap_table_size. Created disk tmp tables ratio seems fine TABLE SCANS Current read_buffer_size = 128 K Current table scan ratio = 2915 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 142213 Your table locking seems to be fine The app is a facebook game with about 50-100 concurrent users. Thanks, Rob

  Read the article

• Server Admin is not allowing me to configure DNS

  - by Clinton Blackmore

  We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

  Read the article

• Does this prove a network bandwidth bottleneck?

  - by Yuji Tomita

  I've incorrectly assumed that my internal AB testing means my server can handle 1k concurrency @3k hits per second. My theory at at the moment is that the network is the bottleneck. The server can't send enough data fast enough. External testing from blitz.io at 1k concurrency shows my hits/s capping off at 180, with pages taking longer and longer to respond as the server is only able to return 180 per second. I've served a blank file from nginx and benched it: it scales 1:1 with concurrency. Now to rule out IO / memcached bottlenecks (nginx normally pulls from memcached), I serve up a static version of the cached page from the filesystem. The results are very similar to my original test; I'm capped at around 180 RPS. Splitting the HTML page in half gives me double the RPS, so it's definitely limited by the size of the page. If I internally ApacheBench from the local server, I get consistent results of around 4k RPS on both the Full Page and the Half Page, at high transfer rates. Transfer rate: 62586.14 [Kbytes/sec] received If I AB from an external server, I get around 180RPS - same as the blitz.io results. How do I know it's not intentional throttling? If I benchmark from multiple external servers, all results become poor which leads me to believe the problem is in MY servers outbound traffic, not a download speed issue with my benchmarking servers / blitz.io. So I'm back to my conclusion that my server can't send data fast enough. Am I right? Are there other ways to interpret this data? Is the solution/optimization to set up multiple servers + load balancing that can each serve 180 hits per second? I'm quite new to server optimization, so I'd appreciate any confirmation interpreting this data. Outbound traffic Here's more information about the outbound bandwidth: The network graph shows a maximum output of 16 Mb/s: 16 megabits per second. Doesn't sound like much at all. Due to a suggestion about throttling, I looked into this and found that linode has a 50mbps cap (which I'm not even close to hitting, apparently). I had it raised to 100mbps. Since linode caps my traffic, and I'm not even hitting it, does this mean that my server should indeed be capable of outputting up to 100mbps but is limited by some other internal bottleneck? I just don't understand how networks at this large of a scale work; can they literally send data as fast as they can read from the HDD? Is the network pipe that big? In conclusion 1: Based on the above, I'm thinking I can definitely raise my 180RPS by adding an nginx load balancer on top of a multi nginx server setup at exactly 180RPS per server behind the LB. 2: If linode has a 50/100mbit limit that I'm not hitting at all, there must be something I can do to hit that limit with my single server setup. If I can read / transmit data fast enough locally, and linode even bothers to have a 50mbit/100mbit cap, there must be an internal bottleneck that's not allowing me to hit those caps that I'm not sure how to detect. Correct? I realize the question is huge and vague now, but I'm not sure how to condense it. Any input is appreciated on any conclusion I've made.

  Read the article

• How to install pip/easy_install on debian 6 for python3.2

  - by atomAltera

  I'm trying to install pip or setup tools form python 3.2 in debian 6. First case: apt-get install python3-pip...OK python3 easy_install.py webob Searching for webob Reading http://pypi.python.org/simple/webob/ Reading http://webob.org/ Reading http://pythonpaste.org/webob/ Best match: WebOb 1.2.2 Downloading http://pypi.python.org/packages/source/W/WebOb/WebOb-1.2.2.zip#md5=de0f371b46554709ce5b93c088a11cae Processing WebOb-1.2.2.zip Traceback (most recent call last): File "easy_install.py", line 5, in <module> main() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1931, in main with_ei_usage(lambda: File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1912, in with_ei_usage return f() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1935, in <lambda> distclass=DistributionWithoutHelpCommands, **kw File "/usr/local/lib/python3.2/distutils/core.py", line 148, in setup dist.run_commands() File "/usr/local/lib/python3.2/distutils/dist.py", line 917, in run_commands self.run_command(cmd) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 368, in run self.easy_install(spec, not self.no_deps) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 608, in easy_install return self.install_item(spec, dist.location, tmpdir, deps) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 638, in install_item dists = self.install_eggs(spec, download, tmpdir) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 799, in install_eggs unpack_archive(dist_filename, tmpdir, self.unpack_progress) File "/usr/lib/python3/dist-packages/setuptools/archive_util.py", line 67, in unpack_archive driver(filename, extract_dir, progress_filter) File "/usr/lib/python3/dist-packages/setuptools/archive_util.py", line 154, in unpack_zipfile data = z.read(info.filename) File "/usr/local/lib/python3.2/zipfile.py", line 891, in read with self.open(name, "r", pwd) as fp: File "/usr/local/lib/python3.2/zipfile.py", line 980, in open close_fileobj=not self._filePassed) File "/usr/local/lib/python3.2/zipfile.py", line 489, in __init__ self._decompressor = zlib.decompressobj(-15) AttributeError: 'NoneType' object has no attribute 'decompressobj' Second case: from http://pypi.python.org/pypi/distribute#installation-instructions python3 distribute_setup.py Downloading http://pypi.python.org/packages/source/d/distribute/distribute-0.6.28.tar.gz Extracting in /tmp/tmpv6iei2 Traceback (most recent call last): File "distribute_setup.py", line 515, in <module> main(sys.argv[1:]) File "distribute_setup.py", line 511, in main _install(tarball, _build_install_args(argv)) File "distribute_setup.py", line 73, in _install tar = tarfile.open(tarball) File "/usr/local/lib/python3.2/tarfile.py", line 1746, in open raise ReadError("file could not be opened successfully") tarfile.ReadError: file could not be opened successfully Third case: from http://pypi.python.org/pypi/distribute#installation-instructions tar -xzvf distribute-0.6.28.tar.gz cd distribute-0.6.28 python3 setup.py install Before install bootstrap. Scanning installed packages No setuptools distribution found running install running bdist_egg running egg_info writing distribute.egg-info/PKG-INFO writing top-level names to distribute.egg-info/top_level.txt writing dependency_links to distribute.egg-info/dependency_links.txt writing entry points to distribute.egg-info/entry_points.txt reading manifest file 'distribute.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'distribute.egg-info/SOURCES.txt' installing library code to build/bdist.linux-x86_64/egg running install_lib running build_py copying distribute.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/entry_points.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO creating 'dist/distribute-0.6.28-py3.2.egg' and adding 'build/bdist.linux-x86_64/egg' to it Traceback (most recent call last): File "setup.py", line 220, in <module> scripts = scripts, File "/usr/local/lib/python3.2/distutils/core.py", line 148, in setup dist.run_commands() File "/usr/local/lib/python3.2/distutils/dist.py", line 917, in run_commands self.run_command(cmd) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "build/src/setuptools/command/install.py", line 73, in run self.do_egg_install() File "build/src/setuptools/command/install.py", line 93, in do_egg_install self.run_command('bdist_egg') File "/usr/local/lib/python3.2/distutils/cmd.py", line 313, in run_command self.distribution.run_command(command) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "build/src/setuptools/command/bdist_egg.py", line 241, in run dry_run=self.dry_run, mode=self.gen_header()) File "build/src/setuptools/command/bdist_egg.py", line 542, in make_zipfile z = zipfile.ZipFile(zip_filename, mode, compression=compression) File "/usr/local/lib/python3.2/zipfile.py", line 689, in __init__ "Compression requires the (missing) zlib module") RuntimeError: Compression requires the (missing) zlib module zlib1g-dev installed Help me please

  Read the article

• Bypass DNSSEC for local Stub zones

  - by Starsky

  I am using bind 9.9.2 as a DNSSEC validating recursive resolver in an Internet DMZ. I want to point to my internal DNS servers as stub zones (ideally) or anything except slave zones (to avoid very large zone transfers). We use a routable ip space for our Internal addressing. Sorry if I am using an IP space that you own in my example, but 167.x.x.x is the first zone I found that fits my issue. E.G dnssec-enable yes; dnssec-validation yes; dnssec-accept-expired no; zone "16.172.in-addr.arpa" { type stub; masters { 167.255.1.53; } } zone "myzone.com" in { type stub; masters { 167.255.1.53; } } When queries hit the DNS server, they attempt at being validated, and fail because 167.in-addr.arpa HAS an RRSIG record, but sub zones do not (and should not!). Google dns is used in this example, but in reality it would be my recursive resolver. @8.8.8.8 -x 167.255.1.53 +dnssec ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 17488 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 6, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags: do; udp: 512 ;; QUESTION SECTION: ;53.1.255.167.in-addr.arpa. IN PTR ;; AUTHORITY SECTION: 167.in-addr.arpa. 1800 IN SOA z.arin.net. dns-ops.arin.net. 2013100713 1800 900 691200 10800 167.in-addr.arpa. 1800 IN RRSIG SOA 5 3 86400 20131017160124 20131007160124 812 167.in-addr.arpa. Lcl8sCps7LapnAj4n403KXx7A3GO7+2z/9Q2R2mwkh9FL26iDx7GlU4+ NufGd92IEJCdBu9IgcZP4I9QcKi8DI28og27WrfKd5moSl/STj02GliS qPTfNiewmTTIDw5++IlhITbp+CoJuZCRCdDbyWKmd5NSLcbskAwbCVlO vVA= 167.in-addr.arpa. 10800 IN NSEC 1.167.in-addr.arpa. NS SOA TXT RRSIG NSEC DNSKEY 167.in-addr.arpa. 10800 IN RRSIG NSEC 5 3 10800 20131017160124 20131007160124 812 167.in-addr.arpa. XALsd59i+XGvCIzjhTUFXcr11/M8prcaaPQ5yFSbvP9TzqjJ3wpizvH6 202MdrIWbsT1Dndri49lHKAXgBQ5OOsUmOh+eoRYR5okxRO4VLc5Tkze Gh0fQLcwGXPuv9A4SFNIrNyi3XU4Qvq0cViKXIuEGTa3C+zMPuvc0her oKk= 254.167.in-addr.arpa. 10800 IN NSEC 26.167.in-addr.arpa. NS RRSIG NSEC 254.167.in-addr.arpa. 10800 IN RRSIG NSEC 5 4 10800 20131017160124 20131007160124 812 167.in-addr.arpa. xnsLBTnPhdyABdvqtEHPxa6Y6NASfYAWfW1yYlNliTyV8TFeNOqewjwj nY43CWD77ftFDDQTLFEOPpV5vwmnUGYTRztK+kB5UrlflhPgiqYiBaBD RQaFQ8DIKaof8/snusZjK7aNmfe09t9gRcaX/pXn3liKz7m/ggxZi0f9 xo0= ;; Query time: 31 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 7 16:52:59 2013 ;; MSG SIZE rcvd: 722 Is there a way to bypass DNSSEC validation for specific zones? Any zone that I host internally, I do not want DNSSEC validation performed on. I have only see this interfere w/ certain reverse zones where the top level has DS/RRSIG records. Thanks.

  Read the article

• Why am I getting a 403 error on a POST to a PHP script?

  - by John Gallagher

  Background I want to allow my users to submit a crash report which will get emailed to me. I'm using UKCrashReporter with the bundled PHP script I've modified. This code does a POST to a specified URL along with the crash report. I'm on a shared server running Linux. My main domain is synapticmishap.co.uk. The Problem When I send the crash report off, on the Cocoa side, it reports as having sent it successfully, but I don't receive an email. The code has been used in lots of other well established Cocoa projects and it was working for me a few months ago. That leads me to conclude that the problems are related to my web server setup, something I know almost nothing about. When I look at my log files, I see entries like this: IP Redacted - - [10/Jun/2010:09:47:53 +0100] "POST /synapticmishap/crashreportform.php HTTP/1.1" 403 74 "-" "UKCrashReporter" What I've tried I've tried accessing the page at http://synapticmishap.co.uk/synapticmishap/crashreportform.php via a browser. It loads fine. I've made sure the permissions on this php script are set so anyone can execute it. I've tried removing the deny entries from the section of .htaccess at various levels starting with root. I've downloaded the URLParams plugin for Firefox which allows you to simulate POSTs. I put in the URL above and tried a post with "crashlog" as the parameter and "test" as the value. This generated a 200 log entry in my log file - it seemed to work, although no mail message was sent. Code I've got the following at http://synapticmishap.co.uk/synapticmishap/crashreportform.php. I've simplified it to just the bare bones in an effort to get it working. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <title>Crash Report</title> </head> <body> <p>This page contains super special magic which submits a crash report item to me.</p> <p>Nothing to see here - move along.</p> <?php mail( "[email protected]", "Crash Report", "\r\n\r\nThis is a test."); ?> </body> </html> This is my top level .htaccess file: RewriteEngine on # -FrontPage- IndexIgnore .htaccess */.??* *~ *# */HEADER* */README* */_vti* <Limit GET POST> order deny,allow deny from all allow from all </Limit> <Limit PUT DELETE> order deny,allow deny from all </Limit> Options All -Indexes RewriteCond %{HTTP_HOST} ^synapticmishap.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.synapticmishap.co.uk$ RewriteCond %{HTTP_HOST} ^lapsusapp.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.lapsusapp.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/synapticmishap\/lapsuspromo\/" [R=301,L] RewriteCond %{HTTP_HOST} ^jgtutoring.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.jgtutoring.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/tutoring" [R=301,L] RewriteCond %{HTTP_HOST} ^synapticmishap.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.synapticmishap.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/synapticmishap" [R=301,L] RewriteCond %{HTTP_HOST} ^jgediting.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.jgediting.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/editing" [R=301,L] RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk$ [NC] RewriteCond %{HTTP_REFERER} !^http://www.synapticmishap.co.uk/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://www.synapticmishap.co.uk$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/synapticmishap/crashreportform.php/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/synapticmishap/crashreportform.php$ [NC] RewriteRule .*\.(jpg|jpeg|gif|png|bmp)$ - [F,NC] Help! I'm at the end of my tether with this and I'm in a very unfamiliar space with all this web stuff. I'd be most appreciative of any thoughts people had on why this isn't working. Thanks.

  Read the article

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >