Search Results

Search found 3262 results on 131 pages for '410 gone'.

Page 64/131 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• How do you compare job offers from companies in different countries?

  - by Danny Tuppeny

  This isn't really a programmer-specific question, but I'm not sure of a more appropriate place, and I think the users of this site are best able to answer the question in the context of programmers. Relocating to the US seems fairly common in the programming industry. I live in the UK, and maybe one day, I might do it too. So, if that day comes - how would you go about comparing job offers? Benefits are fairly easy to compare, but given the differences in cost of living, how would you go about comparing salaries and the quality of living you'll have? In a country where the cost of living is lower, you might be able to accept a lower salary (based on exchange rate) and still have the same quality of living. But what can you do to ensure this? In some cases, you may even take a "pay rise" in terms of exchange rate, but end up far worse off. How can you compare job offers across different countries to get an idea of the salary you would need in order to not feel you've gone "backwards"?

  Read the article

• Directory error when trying to create a new user

  - by Tom Brossman

  I added a second user 'shirley' in Settings - User Accounts, and set a password. The account type is Standard. In 11.04, this worked and I logged in and had a functioning desktop for this user. How is this done in 11.10? When I try to log in as this user I have this error: Nautilus could not create the required folder "/home/shirley/.config/nautilus". Before running Nautilus, please create the following folder, or set permissions such that Nautilus can create it. The only option then is to click OK, this dumps me out to full-screen Nautilus, like this: There is no launcher or visible way to start any programs. Print screen doesn't take a screengrab. The desktop is similar to this question but I get no terminal when I press CTRL+ALT+T. I have to press CTRL+ALT+F2 and restart from the terminal to get out of this. This answer is to install gnome-system-tools. Shouldn't I be able to add a second user with the default install? EDIT: I tried the deluser+adduser suggestion, there was no change after trying it. Here is what I got: tom@desktop:~$ sudo deluser shirley [sudo] password for tom: Removing user `shirley' ... Warning: group `shirley' has no more members. Done tom@desktop:~$ sudo adduser shirley Adding user `shirley' ... Adding new group `shirley' (1001) Adding new user shirley' (1001) with groupshirley' The home directory '/home/shirley' already exists. Not copying from `/etc/skel'. Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Changing user information for shirley Enter the new value, or press ENTER for the default Full Name []: Room Number []: Work Phone []: Home Phone []: Other []: Is the information correct? [Y/n] y What has gone so wrong with simply adding a second user? Am I the only one having this problem? I'd reinstall if that fixed things, but this is a fresh install only a few days old.

  Read the article

• How do I source a shell script for Node Version Manager?

  - by Matthew Patrick Cashatt

  Hi and thanks for looking! I am new to Linux/Ubuntu, but I have set up an Ubuntu box on which to run Node.js. I have had moderate success, but now I need to be able to easily upgrade my version of Node. Many folks recommend using Node Version Manager. I followed the directions, but when I try to do something like this: nvm ls I get a messaging stating that No command NVM found I have gone back to check the steps I followed to install NVM, but there is one part that is tricky for may and I think to be the culprit: sourcing the file for bash. From the instructions: To activate nvm, you need to source it from your bash shell . ~/nvm/nvm.sh I always add this line to my ~/.bashrc or ~/.profile file to have it automatically sources upon login. Often I also put in a line to use a specific version of node. So which file should I add this to? I am guessing profile since it's ubuntu?? Also, where in the file do I add this line? After I have added this line, do I need to reboot or anything? Any help would be deeply appreciated--especially if you can show me an example profile file with . ~/nvm/nvm.sh integrated so that I can see usage. Thanks, Matt

  Read the article

• Demantra Implementation Tip Windows and Unix or Linux

  - by user702295

  Hello!  Are you implementing using a third party or consulting resources?   Recently we have seen some cases where customers no longer have a windows installation.  After the initial install and configuration, once the instance has gone live, the windows install is either deleted or most likely no longer with the customer as the same was installed on the implementers' laptop to start with. As a result when support comes back requesting the customer to apply a patch and/or upgrade they do not have a windows installation.  This has started happening after Oracle Demantra gave them the option to configure the engine on Unix.  Workaround: It is advisable that the customer keep their Windows installation intact for further patching and/or upgrade.  It is aslo possible that the implementer had installed Demantra on his Windows box and you do not have access to it any more.  It is possible that with the web and engine on Unix, and the silent installer having downloaded all the executable for Business Modeler, to work on the User's client machine, you may no longer need the windows install. I have not tested the above 

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Correct nvidia+intel graphics setup in 14.04

  - by Espressofa

  Just upgraded to 14.04 to try to fix some other issues. Now, something has gone wrong with my graphics. I have a Thinkpad T530 with Intel and Nvidia graphics cards. $ inxi -SGx System: Host: xyz Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Ubuntu 14.04 trusty Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA GF108M [NVS 5400M] bus-ID: 01:00.0 X.Org: 1.15.1 drivers: fbdev,vesa,intel,nouveau (unloaded: nvidia) Resolution: [email protected] GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". I'm not sure what I did but now something is wrong with my graphics, as should be visible from the above commands. nvidia-detector says "none" as well. I used to have bumblebee but then some website said to remove it and now something's clearly wrong. What's the right way to set things up? Should I try to add bumblebee back? Here's what's installed now: $ dpkg --get-selections | grep nvidia nvidia-319 install nvidia-331 install nvidia-libopencl1-331 install nvidia-opencl-icd-331 install nvidia-prime install nvidia-settings install nvidia-settings-319 install

  Read the article

• alt+tab moves windows between workspaces and crashes unity

  - by Ruslanchik

  I have recently been using multiple workspaces in unity but have run into a bug that is making it very difficult to do this effectively. The problem is with alt+tab. When I am focused on a window that is not in the primary (top-left) workspace one of two things happens: Unity restarts (the launcher and menu bar disappear and screen flashes blank before everything reappears) and all of my windows are moved to different workspaces. The focused window is always moved to the primary workspace and other windows are typically moved one workspace to the left. alt+tab will usually function normally after this. Unity completely crashes. The windows in the current workspace are still there, but the launcher and menu bar are gone, I cannot switch between workspaces, and none of the hotkeys work. The same issues occur when using alt+` as well. I have installed ccsm, but have made only minor adjustments with it. I am still using the Unity switcher. I actually uninstalled ccsm hoping that would resolve the issue, but the issue persists. Is there some resolution to this issue? I like Unity and want to keep using it, but having to use the mouse to switch between programs is irritating and enough reason to switch to Gnome.

  Read the article

• Understanding and memorizing git rebase parameters

  - by Robert Dailey

  So far the most confusing portion of git is rebasing onto another branch. Specifically, it's the command line arguments that are confusing. Each time I want to rebase a small piece of one branch onto the tip of another, I have to review the git rebase documentation and it takes me about 5-10 minutes to understand what each of the 3 main arguments should be. git rebase <upstream> <branch> --onto <newbase> What is a good rule of thumb to help me memorize what each of these 3 parameters should be set to, given any kind of rebase onto another branch? Bear in mind I have gone over the git-rebase documentation again, and again, and again, and again (and again), but it's always difficult to understand (like a boring scientific white-paper or something). So at this point I feel I need to involve other people to help me grasp it. My goal is that I should never have to review the documentation for these basic parameters. I haven't been able to memorize them so far, and I've done a ton of rebases already. So it's a bit unusual that I've been able to memorize every other command and its parameters so far, but not rebase with --onto.

  Read the article

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• I want to be a programmer, work in corporate environment, earn well, learn fast and eventually become a great programmer [on hold]

  - by Shin San

  I'll try to keep this simple: I'm 29, been dabbling with computers for the past 10 years, had entry level jobs in tech support for different apps, been fixing computers for a while and now want to specialize in something. I'm not 100% stranger to programming but haven't gone past if/then/else with anything. A bit of JavaScript, PHP, Python and currently checking out the "SELECT" statement in SQL :)) I'm curious about programming, I enjoy it and I'm thinking of making a living out of it. So, while I'm at it, why not earn a bit more than the average Joe? So, that's why I'm checking what the best solution, the best learning path and the most useful languages are considering: a) how easy/fast can you find a job by knowing it b) how much would I be able to earn c) how fast can I learn it By reading 10-20 articles online I've come up with an example, but I'm here for some expert advice. Example: * ratings from a) and b) point of view #1 sql ; #2 java ; #3 html (please don't start the markup language debate) ; #4 javascript From this ratings, I'd say a good way to go is learn html/css/(javascript or php) for the web part of apps, some SQL/MySQL/whateverSQL for holding data and loads of Java for the program itself. Please let me know if this is a good idea and if so, what should be the order for learning all of the above. Else, please let me know a better way and why it would be better. Many thanks for taking the time to read my question. Best wishes to you guys Edit: if I think Java + SQL + HTML&JavaScript is the way to go, does the order I'm learning them in matter? Or can I try to learn them all at once?

  Read the article

• Why don't windows of the same application behave as they should?

  - by Yuttadhammo

  Somewhere along the upgrade path, Unity has developed some strange logic behind window layering. First, before Oneiric, there was a way to see all the windows of an application - I think it was when you click on the icon in the launcher. Now, clicking on the icon often does nothing. Suppose I have two terminals open, one behind this Firefox window, and one in front of it. Clicking on the launcher does nothing - the only way to find the second terminal, afaics, is to move the Firefox window or use the task switcher. Secondly, once I have both terminals on top, then I decide to close one of them, suddenly they both disappear (the second one, for some reason, has gone into hiding behind the Firefox window). Third (though I can't pin it down now), sometimes when a window is on top, focus is still on a window in back; I click on the top x to close the window in front, only to find I've closed an important window in the back. (Update: this question details the problem) I can't really believe these are bugs, since they seem too obvious to not have been fixed by now. My question is, am I missing something? Some compiz option I can set to make it act like it used to? Or is this really how Unity is supposed to act?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Touchpad stopped working on an Acer AspireOne D255E

  - by Gustavo

  I have a less than a year old Acer AspireOne D255E with a fresh install of Ubuntu 11.10. Everything has been working fine. Great OS and great netbook. But today the touchpad stopped working. It had been working fine. I closed the netbook and when I opened it again, a couple of hours later, I could not move the pointer with the touchpad. I can not get the pointer to move. I cleaned the touchpad surface well, just in case. Everything else is working fine. All the software updates are up-to-date. I have rebooted several times with no solution. I have attached an USB mouse and the pointer works well. What can I do to troubleshoot the problem? I have gone to the System Settings, touchpad section, and there is not much that I can do there. I would like to determine first if it is a hardware or software issue and then how to resolve it. Is there a way that I can reinstall the touchpad drivers. just in case it is a software problem? I have been using Ubuntu for nearly a year now and am very happy with it. Are there any wise Ubuntu gurus out there who can help me? Thank you for reading this note.

  Read the article

• Java Embedded @ JavaOne

  - by Tori Wieldt

  Developers, tell your manager (or the other half of your developer-entrepreneur self) about this new event being held Wednesday, Oct. 3th and Thursday, Oct. 4th in San Francisco at the Hotel Nikko (during JavaOne).Java Embedded @ JavaOne is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads).A call for papers has gone out, but is ONLY for business-focused submissions. Event organizers are looking for best practices, case studies and panel discussions on emerging opportunities in the Java embedded space. Please consider submitting a paper. The deadline for submission is July 18.Attendees of both JavaOne and Oracle Openworld can attend Java Embedded @ JavaOne by purchasing a $100.00 USD upgrade to their full conference pass. Rates for attending Embedded @ JavaOne alone are here.

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• An experiment: unlimited free trial

  - by Alex.Davies

  The .NET Demon team have just implemented an experiment that is quite a break from Red Gate's normal business model. Instead of the tool expiring after the trial period, it now continues to work, but with a new message that appears after the tool has saved you a certain amount of time. The rationale is that a user that stops using .NET Demon because the trial expired isn't doing anyone any good. We'd much rather people continue using it forever, as long as everyone that finds it useful and can afford it still pays for it. Hopefully the message appearing is annoying enough to achieve that, but not for people to uninstall it. It's true that many companies have tried it before with mixed results, but we have a secret weapon. The perfect nag message? The neat thing for .NET Demon is that we can easily measure exactly how much time .NET Demon has saved you, in terms of unnecessary project builds that Visual Studio would have done. When you press F5, the message shows you the time saved, and then makes you wait a shorter time before starting your application. Confronted with the truth about how amazing .NET Demon is, who can do anything but buy it? The real secret though, is that while you wait, .NET Demon gives you entertainment, in the form of a picture of a cute kitten. I've only had time to embed one kitten so far, but the eventual aim is for a random different kitten to appear each time. The psychological health benefits of a dose of kittens in the daily life of the developer are obvious. My only concern is that people will complain after paying for .NET Demon that the kittens are gone.

  Read the article

• How do I keep controversy in check?

  - by Aaron Digulla

  This is probably OT but it's less OT here than on any other SO site, so please bear with me. I'm working on a new project votEm. The goal is to give independent candidates a platform to introduce themselves to get elected for a political office. My main reason is that today, it's too expensive to run for an office. Some politicians in the US spend as much as 30 million dollars (!) for a single campaign. That money is better spent elsewhere. In a similar fashion, people who want to change countries like Egypt, could use such a platform to present themselves. Now I expect a lot of emotions and pressure on my site. People with a lot of money (and a lot to lose) will try to game it (political parties, secret services of ... errr ... "not 100% democratic countries", big companies, ...) To avoid as many mistakes as possible, I need a list of resources, ideas and tips how to keep such a site out of too much trouble. PS: I'd make this CW but the option seems to be gone...

  Read the article

• My site has crashed .. anyone have some info ?

  - by marwan

  Hi all , I booked a domain name for my website from a hosting provider .I gave the domain name , along with ftp details to a freelancer to develop the site in wordpress . the freelancer developped and he got full payment , and the site and site was working fine ,etc .. From that time , I did not change the admin logging as well as ftp details , this means that such info is still known to the freelancer .. A week ago , I found that some links in my site was not working .. I sent him a mail about this , and he said that he will fix it if i give him ftp details . and I did so , next I found that the entire site is gone . then he sent me a mail , without I asked him , and he he said that there have been someone who got access to my server , and he removed all files of my site and he installed drupal instead .and that he can rebuild the site in one day , by charging a full fee of 250 usd again .. Can anyone know what I can do in this situation , to find who did such act , could it be the host provider or that freelancer ,, and if there is a possibility to have my site back top the server .. I will appreciate any info on this.. Regards , Thanks

  Read the article

• Working with Reporting Services Filters–Part 5: OR Logic

  - by smisner

  When you combine multiple filters, Reporting Services uses AND logic. Once upon a time, there was actually a drop-down list for selecting AND or OR between filters which was very confusing to people because often it was grayed out. Now that selection is gone, but no matter. It wouldn’t help us solve the problem that I want to describe today. As with many problems, Reporting Services gives us more than one way to apply OR logic in a filter. If I want a filter to include this value OR that value for the same field, one approach is to set up the filter is to use the IN operator as I explained in Part 1 of this series. But what if I want to base the filter on two different fields? I  need a different solution. Using the AdventureWorksDW2008R2 database, I have a report that lists product sales: Let’s say that I want to filter this report to show only products that are Bikes (a category) OR products for which sales were greater than $1,000 in a year. If I set up the filter like this: Expression Data Type Operator Value [Category] Text = Bikes [SalesAmount]   > 1000 Then AND logic is used which means that both conditions must be true. That’s not the result I want. Instead, I need to set up the filter like this: Expression Data Type Operator Value =Fields!EnglishProductCategoryName.Value = "Bikes" OR Fields!SalesAmount.Value > 1000 Boolean = =True The OR logic needs to be part of the expression so that it can return a Boolean value that we test against the Value. Notice that I have used =True rather than True for the value. The filtered report appears below. Any non-bike product appears only if the total sales exceed $1,000, whereas Bikes appear regardless of sales. (You can’t see it in this screenshot, but Mountain-400-W Silver, 38 has sales of $923 in 2007 but gets included because it is in the Bikes category.)

  Read the article

• Java Embedded @ JavaOne

  - by Tori Wieldt

  Developers, tell your manager (or the other half of your developer-entrepreneur self) about this new event being held Wednesday, Oct. 3th and Thursday, Oct. 4th in San Francisco at the Hotel Nikko (during JavaOne).Java Embedded @ JavaOne is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads).A call for papers has gone out, but is ONLY for business-focused submissions. Event organizers are looking for best practices, case studies and panel discussions on emerging opportunities in the Java embedded space. Please consider submitting a paper. The deadline for submission is July 18.Attendees of both JavaOne and Oracle Openworld can attend Java Embedded @ JavaOne by purchasing a $100.00 USD upgrade to their full conference pass. Rates for attending Embedded @ JavaOne alone are here.

  Read the article

• How to add a new developer to the team

  - by lortabac

  I run a small company composed of only 2 developers. For one of our clients we are building a very big application, whose development has gone on for 1.5 years. Now this client has found an important sponsorship, and they are organizing some events related to this project, so we have a deadline in 2 months and we can't miss it. We are thinking of adding a new developer to the team, and I am wondering what we can do to help his integration. This is the situation: We are approaching the threshhold of Brooks's law, the point when adding new developers will be counter-productive. The application is relatively well designed, but the implementation is chaotic in some points (especially older code). There are unit tests only for more recent code. When this project started, we didn't have the habit of doing tests. Documentation and comments are incomplete. The application is both large and complex. The client has written down almost every detail about his project, in a very clear and "programmer-friendly" way. Is it a good idea to add a person now? If so, what can we do in order to help the new developer integrate into the team?

  Read the article

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• How can I make permanent death in a MUD seem acceptable and fair to players?

  - by Luke Laupheimer

  I have considered writing a MUD for years, and I have a lot of ideas my friends think are really cool (and that's how I'd hope to get anywhere -- word of mouth). Thing is, there's one thing I have always wanted, that my friends and strangers hated: permanent death. Now, the emotional response I get to this is visceral revulsion, every time. I'm pretty sure I am the only person that wants this, or if I'm not, I'm a tiny minority. Now, the reason I want it is because I want the actions of the players to matter. Unlike a lot of other MUDs, which have a set of static city-states and social institutions etc, I want the things my players do, should I get any, to actually change the situation. And that includes killing people. If you kill someone, you didn't send them to time out, you killed them. What happens when you kill people? They go away. They don't come back in half an hour to smack talk you some more. They're gone. Forever. By making death non-permanent, you make death not matter. It would be similar if a climax to a character's arc is getting a speeding ticket. It cheapens it. Non-permanent death cheapens death. How can I: 1) Convince my players (and random people!) that this is actually a good idea?, or 2) Find some other way to make death and violence matter as much as it does in real life (except within the game, of course) sans character deletion? What alternatives are there out there?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >