Search Results

Search found 19332 results on 774 pages for 'hard drive'.

Page 642/774 | < Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >

• CentOS Installation on a Cisco MCS 7800

  - by William

  I'm having some problems installing CentOS 5.5 Final (i386) onto my server, a Cisco MCS 7800. The problem comes very early into the installation. When the welcome screen comes up and gives you the option on how to boot into the DVD, I'll press enter to go into the graphical installer. The screen will then have a blinking cursor in the top left of the screen and will never go away (I thought that it just might need time but I let it sit for over 5 hours). I then booted into it again and tried using Linux Text thinking it was a problem with the graphical installer. That didn't work, same problem. Then I tried a DVD of RHEL 5 and got the same problem, both graphical and Linux text. At this point I think it's a hardware problem. The server has 2GB of ECC RAM, 1 Pentium 4 CPU @ 3.06GHZ and 2 WD Hard Drives (80GB) configured for RAID 0. (There is also an option in the BIOS for what OS type and that is set to Linux.) If anyone has any idea what is going on, it would be helpful. Edit Typing "text" doesn't change a thing. Still stuck at the blinking cursor. I looked it up and it's really the same thing as typing "linux text", which as stated in the first part of my question, I've already done.

  Read the article

• ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

  - by jtseng

  Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

  Read the article

• Apache stops responding to http requests -- https continues to work

  - by Apropos

  Okay. Very strange problem that I'm having here. I just recently updated to Apache 2.4.2 from 2.2.17, mostly to try to get name-based SSL VirtualHosts working (although they should have been working on 2.2.17). Server is Win2008 R2 (so x64 by definition) running with PHP 5.4.3 and MySQL 5.1.40 (outdated, I know). When I launch the server, it initially works fine. Responds to all requests, VirtualHosts all in order. However, after an uncertain amount of time (appears to only take a few minutes for the most part, but sometimes takes hours), it stops responding to regular HTTP requests (on any VirtualHost). HTTPS continues to work. No errors in the log, and nothing in the access logs when I attempt to connect. I'm having a hard time finding the source of this error given its intermittent nature. When removing all SSL-based VirtualHosts, it seemingly increased stability (still responding to HTTP requests twelve hours later). This could be mere coincidence, though. Entirety of SSL VirtualHost is as follows, should there happen to be a problem with it. <VirtualHost *:443> DocumentRoot "C:\Server\www\virtualhosts\mysite.net" ErrorLog logs/ssl.mysite.net-error_log CustomLog logs/ssl.mysite.net-access_log common env=!dontlog SSLEngine on SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM SSLCertificateFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.crt SSLCertificateKeyFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.key SSLCertificateChainFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/sub.class1.server.ca.pem SSLCACertificateFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/ca.pem </VirtualHost> Any ideas what I'm missing?

  Read the article

• Diagnosing Microsoft SQL Server error 9001: The log for the database is not available.

  - by Scott Mitchell

  Over the weekend a website I run stopped functioning, recording the following error in the Event Viewer each time a request is made to the website: Event ID: 9001 The log for database 'database name' is not available. Check the event log for related error messages. Resolve any errors and restart the database. The website is hosted on a dedicated server, so I am able to RDP into the server and poke around. The LDF file for the database exists in the C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA folder, but attempting to do any work with the database from Management Studio results in a dialog box reporting the same error - 9001: The log for database is not available... This is the first time I've received this error, and I've been hosting this site (and others) on this dedicated web server for over two years now. It is my understanding that this error indicates a corrupt log file. I was able to get the website back online by Detaching the database and then restoring a backup from a couple days ago, but my concern is that this error is indicative of a more sinister problem, namely a hard drive failure. I emailed support at the web hosting company and this was their reply: There doesn't appear to be any other indications of the cause in the Event Log, so it's possible that the log was corrupted. Currently the memory's resources is at 87%, which also may have an impact but is unlikely. Can the log just "become corrupted?" My question: What are the next steps I should take to diagnose this problem? How can I determine if this is, indeed, a hardware problem? And if it is, are there any options beyond replacing the disk? Thanks

  Read the article

• Outlook won't re-connect to exchange after network is re-connected

  - by stan503

  I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

  Read the article

• How can I debug solutions in Visual Studio 2010 from a network share?

  - by alastairs

  I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

  Read the article

• Server 2012, Jumbo Frames - should I expect problems?

  - by TomTom

  Ok, this sound might stupid - but is there any negative on just enabling jumbo frames in practice? From what I understand: Any switch or ethernet adapter that sees a jumbo frame it can not handle will just drop it. TCP is not a problem as max frame size is negotiated in the setinuo phase. UCP is a theoretical problem as a server may just send a LARGE UDP packet that gets dropped on the way. Practically though, as UDP is packet based, I do not really think any software WOULD send a UDP packet larger than 1500 bytes net without app level configuration changes - at least this is how I do my programming, as it is quite hard to get a decent MTU size for that without testing yourself, so you fall back in programming to max 1500 packets. The network in question is a standard small business network - we upgraded now from a non managed 24 port switch to a 52 port switch with 4 10g ports (netgear - quite cheap) and will mov a file server to 10g for also ISCSI serving. All my equipment on the Ethernet level can handle minimum 9000 bytes and due to local firewalls I really want to get packets larger (less firewall processing), but the network is also NAT'ed to the internet. On top, different machines move around (download) large files (multi gigabyte area) quite often for processing. The question is - can I expect problems when I just enable jumbo frames? Again, this is not totally ignorance - I just don't see programs sending more than 1500 byte UDP packets (if that is a practical problem please tell me) and for TCP the MTU is negotiated anyway. if there is a problem I can move to a dedicated VLAN, but this has it's own shares of problems as basically most workstations must then be on both VLAN's.

  Read the article

• Cannot access server shares over VPN

  - by DuncanDavies

  I've set up a single hosted server to use as a development environment for a web-based application. The web app is served up fine on port 80, however I'm struggling to get my VPN to behave how I'd expect so the developers don't have the access they require. The VPN connects fine and I can access the back-end database (SQL Server) which resides on the server with the client tools from the laptops. However they cannot access any shared folders. The server's local IP address is 10.x.x.x, and I've assigned a static IP address pool to RRAS (of 192.168.100.1 - 20). The clients pick up a valid IP Address (i.e. 192.168.100.9) when they connect. There is no name resolution setup, DNS or WINS. When connected via VPN the clients can ping the server (192.168.100.1) by IP Address, but cannot map a drive to a shared folder (net use * \\192.168.100.1\xxxxx) - I get 'System error 53 has occurred. The network path was not found.' I don't understand why I can ping by the ip, but not map by it. Some details: Server OS is Windows 2008 (Datacenter) VPN is SSTP using RRAS Clients are all Windows 7 I've tried temporarily disabling the firewalls So, why can we not access the file system when everything else (ping, RDP, SQL Server clients tools) works? Thanks for your help Duncan

  Read the article

• My linux server "Number of processes created" and "Context switches" are growing incredibly fast

  - by Jorge Fuentes González

  I have a strange behaviour in my server :-/. Is a OpenVZ VPS (I think is OpenVZ, because /proc/user_beancounters exists and df -h returns /dev/simfs drive. Also ifconfig returns venet0). When I do cat /proc/stat, I can see how each second about 50-100 processes are created and happens about 800k-1200k context switches! All that info is with the server completely idle, no traffic nor programs running. Top shows 0 load average and 100% idle CPU. I've closed all non-needed services (httpd, mysqld, sendmail, nagios, named...) and the problem still happens. I do ps -ALf each second too and I don't see any changes, only a new ps process is created each time and the PID is just the same as before + 1, so new processes are not created, so I thought that process growing in cat /proc/stat must be threads (Yes, seems that processes in /proc/stat counts threads creation too as this states: http://webcache.googleusercontent.com/search?q=cache:8NLgzKEzHQQJ:www.linuxhowtos.org/System/procstat.htm&hl=es&tbo=d&gl=es&strip=1). I've changed to /proc dir and done cat [PID]\status with all PIDs listed with ls (Including kernel ones) and in any process voluntary_ctxt_switches nor nonvoluntary_ctxt_switches are growing at the same speed as cat /proc/stat does (just a few tens/second), Threads keeps the same also. I've done strace -p PID to all process too so I can see if any process is crating threads or something but the only process that has a bit of movement is ssh and that movement is read/write operations because of the data is sending to my terminal. After that, I've done vmstat -s and saw that forks is growing at the same speed processes in /proc/stat does. As http://linux.die.net/man/2/fork says, each fork() creates a new PID but my server PID is not growing! The last thing I can think of is that all process data that proc/stat and vmstat -s show is shared with all the other VPS stored in the same machine, but I don't know if that is correct... If someone can throw some light on this I would be really grateful.

  Read the article

• Office 2010 Trusted Locations not working after restart

  - by Josh King

  In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

  Read the article

• Do I need to restart my server after editing fstab and mtab?

  - by jaypabs

  I'm just wondering if I need to restart my server after editing fstab and mtab. I changed something in this file manually due to problem with awstats report. I am using ISPConfig 3 with the help of the tutorial from howtoforge. But due to removing/deleting of some account, the configuration of fstab and mtab messed up. I also ask this question at howtoforge forum but until now no one has answered. If you'd like to read my question please visit it here. I tried very hard to fix the problem w/o luck. Update: Here's what happen to my fstab: Before the value was (I omitted the other): /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 So I changed it to the correct path: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none bind,nobootwait 0 0 I also found mtab to have the same value as above that's why I edited it manually. from: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none rw,bind 0 0 to: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none rw,bind 0 0 I edited those value because the correct path of mydomain.com and example.com should be under web2 and web3 folder respectively. As of now the log of example.com is pointed to: /var/www/clients/client1/web2/log when it should be: /var/www/clients/client1/web3/log So I am thinking that this is because of fstab and mtab. Please guide me how to point the log correctly to it's default directory. I explain the scenario one by one at this link. to dawud: Based on your example mount -o remount,noexec /var, should I run mount -o remount,noexec /var/log/ispconfig/httpd/example.com?

  Read the article

• Problems with Windows 7 restore

  - by Chris Lively

  My WD raptor 150 failed with a nice clicking noise. So, I picked up a velociraptor 300 and popped it in. I had windows set to do a full system backup nightly, so I figured the recovery ought to go easily. Well, it isn't. It is currently stuck on a screen that says: "Windows is restoring your computer from the system image. This might take from a few minutes to a few hours" Below that is a rather large progress meter with maybe the first block filled in. Below that is a message that says "Restoring disk (C:)..." It's been that way for over an hour. The first time around, I gave up after 2 hours. I then booted into the system recovery options and went to a command prompt and ran a chkdsk on the new drive. It showed several file inconsistencies and not much else. I ran a chkdsk /f on it and tried again... Which is where I'm at now. I can't see that the restore process should take this long before. Any ideas? UPDATE After 10 hours, it's still on "Restoring disk (C:)" and the progress meter is at roughly 5%. I'm guessing at the 5% as there isn't an actual number or anything else that I can look at showing what it's actually doing. The backup contains roughly 120GB of data. How slow is windows restore?

  Read the article

• Remote search system for samba shares

  - by fostandy

  I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) edit: similar question here What else is out there? Are you in a similar situation? What do you use?

  Read the article

• Mac Backup Plan

  - by Chuy77

  I'm reviewing my backup plan and would appreciate any thoughts about what more I should do (if anything) to make sure I'm properly covered in case of all hell breaking loose. :-) I have one machine. 1) I run a nightly clone with SuperDuper. I alternate the clone drive weekly so I have two clones, one never more than a week old. 2) I use BackBlaze as a sort of Time Machine in the cloud. It runs all the time and keeps everything on my machine backed up online. 3) I sync all my 1Password logins, etc. to my iPhone once a week. ...And that's it. I feel pretty covered. But I'm always reading stuff like this: http://www.43folders.com/2010/03/15/yes-another-backup-lecture And that doesn't even mention online backup, and seems like a huge pain in the behind. But maybe I'm being naive? Should I have more backups? Thanks for any feedback. I really appreciate it.

  Read the article

• Using my old PC as a web/file server?

  - by Garrett

  I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

  Read the article

• Looking for a recommendation on measuring a high availability app that is using a CDN.

  - by T Reddy

  I work for a Fortune 500 company that struggles with accurately measuring performance and availability for high availability applications (i.e., apps that are up 99.5% with 5 seconds page to page navigation). We factor in both scheduled and unscheduled downtime to determine this availability number. However, we recently added a CDN into the mix, which kind of complicates our metrics a bit. The CDN now handles about 75% of our traffic, while sending the remainder to our own servers. We attempt to measure what we call a "true user experience" (i.e., our testing scripts emulate a typical user clicking through the application.) These monitoring scripts sit outside of our network, which means we're hitting the CDN about 75% of the time. Management has decided that we take the worst case scenario to measure availability. So if our origin servers are having problems, but yet the CDN is serving content just fine, we still take a hit on availability. The same is true the other way around. My thought is that as long as the "user experience" is successful, we should not unnecessarily punish ourselves. After all, a CDN is there to improve performance and availability! I'm just wondering if anyone has any knowledge of how other Fortune 500 companies calculate their availability numbers? I look at apple.com, for instance, of a storefront that uses a CDN that never seems to be down (unless there is about to be a major product announcement.) It would be great to have some hard, factual data because I don't believe that we need to unnecessarily hurt ourselves on these metrics. We are making business decisions based on these numbers. I can say, however, given that these metrics are visible to management, issues get addressed and resolved pretty fast (read: we cut through the red-tape pretty quick.) Unfortunately, as a developer, I don't want management to think that the application is up or down because some external factor (i.e., CDN) is influencing the numbers. Thoughts? (I mistakenly posted this question on StackOverflow, sorry in advance for the cross-post)

  Read the article

• How to auto mark tape as free in DPM 2012?

  - by Massimo

  I have a backup server running System Center Data Protection Manager 2012, connected to a couple of tape drives (no library). I also have, of course, some tapes. Tape rotation is manual. The tape have been used before, by DPM itself (but the server has been completely rebuilt) and by other backup softwares; they are not emtpy. But they contain no data that DPM knows and/or wants to preserve, so they can be marked as free without having to run forcefreetape.ps1. When a tape is placed into the drive, it is required to perform an inventory, have it recognized as an imported tape and then mark it as free; otherwise DPM will simply refuse to use it. How can I tell DPM to automatically treat those imported tapes as free? And, of course, I do not want to reuse real backup tapes if by chance they get put into the drives before their expiration date, so the solution should mark imported tapes as free, but should not do the same with real, non-expired tapes.

  Read the article

• Excel 2007 - "The macro may not be available in this workbook" Error

  - by Psycho Bob

  We use an Excel sheet that has been protected to prevent modification of it from end users. All in all they are only able to edit certain tabs to add information that will then be used to generate information on other tabs using equations and such. On the tab with the equations, a button is present called "Prep for Internal Hard Copy Print." This button runs a macro that selects the information on the tab, unprotects it, then sends a print job to the user's default printer that contains the unprotected content. Normally this works like a champ. This time around, however, the macro is throwing the following error: Cannot run the macro "FILENAME.xlsx'!MacroName'. The macro may not be available in this workbook or all macros may be disabled. As far as I can tell, the macros are still present within the workbook. This sheet is normally a .xlsm though the user saved it with a different filename as a .xlsx. Also, the macros appear only as MacroName in the .xlsm file and not "FILENAME.xlsx'!MacroName' as it does in the .xlsx. Finally, when I open the .xlsm it asks if I want to enable the macro content while the .xlsx does not prompt for this. Can anyone tell me what's going on with this sheet or know of a way that I can get the macros working in the .xlsx without having to start over with a different sheet?

  Read the article

• Why does Windows make random "device connect" and "device disconnect" sounds?

  - by Steve Elmer

  Hello, I've been noticing this since Windows Vista. I see it on Windows 7, now, as well. In any case throughout the day I notice that my computer makes apparently random device-connect and/or device-disconnect ("boink") sounds. I suppose it is the same sound you hear when connecting or disconnecting a USB device such as a thumb drive. I've noticed that this happens on each of three computers I work with at home, my wife's computer, and my machine at work. It happens without any user action at all - i.e. I'll be just sitting there (hands off my mouse and keyboard), and the computer will make the sound. There is no visual queue or anything. Just the sound. I have sometimes gone in pursuit of the sound - running virus scans, examining event logs and such, and observing task manager - but have never had any luck tracking this thing down, but have not had any luck. Surely someone else out there must be experiencing this, too. Any ideas? Thanks, Steve

  Read the article

• Why does Windows make random "device connect" and "device disconnect" sounds?

  - by Steve Elmer

  Hello, I've been noticing this since Windows Vista. I see it on Windows 7, now, as well. In any case throughout the day I notice that my computer makes apparently random device-connect and/or device-disconnect ("boink") sounds. I suppose it is the same sound you hear when connecting or disconnecting a USB device such as a thumb drive. I've noticed that this happens on each of three computers I work with at home, my wife's computer, and my machine at work. It happens without any user action at all - i.e. I'll be just sitting there (hands off my mouse and keyboard), and the computer will make the sound. There is no visual queue or anything. Just the sound. I have sometimes gone in pursuit of the sound - running virus scans, examining event logs and such, and observing task manager - but have never had any luck tracking this thing down, but have not had any luck. Surely someone else out there must be experiencing this, too. Any ideas? Thanks, Steve

  Read the article

• Malware Defense Shows Up in PlayOn Settings/Logs Although System Has Been Thoroughly Cleaned

  - by nicorellius

  I was hit really hard by some nasty malware: Malware Defense. I was doing something I should not have been doing when I got it (surfing Pirate Bay for TV shows). It locked up my system and I had to reboot in safe mode. I was able to shut down the process and remove it using a malware killer tool. I then installed, after my machine was cleaned up a bit, Clamwin, Malwarebytes, and another AV tool. I cleaned the heck out of my system. Simultaneously, while this was going on, I was having trouble with my media-server, PlayOn. This tool is great, but has some bugs. One in particular is that it will not function well with AV software running. I found a way to allow the new AV software to run while using PlayOn, but it still says I have Malware Defense on. Firstly, Malware Defense is long gone. I cleaned all remnants from my registry and scoured my system with the above tools multiple times. PlayOn is getting some information that I have this crap installed on my system, but it's not. The system runs OK, but not optimally. I have a feeling it is causing my streaming to be interrupted sometimes. How is it that I can't even find Malware Defense on my system if I tried but yet somehow PlayOn is getting a finger print of it somewhere? I have gone back and forth with MediaMall to no avail. I kind of just gave up, because the streaming works OK. BTW, I also uninstalled/reinstalled PlayOn several times, reverted back to previous versions, etc. The only thing I haven't done is reformat my disk and reinstall Windows. I really don't want to do this if there is another way to remove this little print. Any ideas?

  Read the article

• Generating new SID for Windows 7 cloned partition in Linux?

  - by Jack

  So I've read that the proper way to clone a Windows 7 partition is to run a Sysprep after the clone is complete. For MANY reasons, this is not possible the way we are cloning these drives (long story short, the drive should be fully up and running after we clone it, with all the settings already there and requiring no user intervention; and no, not even an answer file would work because the way we customize all the Win7 settings is complex and we do not want the user touching the settings). I understand Microsoft will not support Windows 7 clones if it is not sysprepped and that is fine for us. Acronis recovery tools get around this by ticking an option called "Create new NT signature", which resets the SID and GUID on any restore. Symantec has a tool called Ghostwalker which does the same thing. However, we are looking for a way to do this in Linux because we want to use open source tools to do the imaging (fsarchiver, partclone, etc. basically the same tools Clonezilla uses internally to clone NTFS partitions). The question is, if we clone using these tools in Linux, how would we generate a new SID thereafter (without the use of sysprep)? Is there any way to do it within a Linux environment? The whole image process is automated so if it is a simple command that I can just throw in my shell script, that would be even better. Of course, it would be nice to know if this is even possible. Any ideas? EDIT: Forgot to mention that the target machines we are restoring the image on are EXACTLY the same.

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• "Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

  - by Mike B

  CentOS | Windows 2008 I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on. I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following: C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z: Network Error - 53 Type 'NET HELPMSG 53' for more information. (IP and share name have been changed to protect the innocent :-) ) Additional information: I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled. I came across a Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck. I've confirmed that the share folder on the NFS server is readable/writable by all (777) I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck. As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found". I'm lost on how to proceed with troubleshooting. Any ideas?

  Read the article

• Traffic shaping on Linux with HTB: weird results

  - by DADGAD

  I'm trying to have some simple bandwidth throttling set up on a Linux server and I'm running into what seems to be very weird stuff despite a seemingly trivial config. I want to shape traffic coming to a specific client IP (10.41.240.240) to a hard maximum of 75Kbit/s. Here's how I set up the shaping: # tc qdisc add dev eth1 root handle 1: htb default 1 r2q 1 # tc class add dev eth1 parent 1: classid 1:1 htb rate 75Kbit # tc class add dev eth1 parent 1:1 classid 1:10 htb rate 75kbit # tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.41.240.240 flowid 1:10 To test, I start a file download over HTTP from the said client machine and measure the resulting speed by looking at Kb/s in Firefox. Now, the behaviour is rather puzzling: the DL starts at about 10Kbyte/s and proceeds to pick up speed until it stabilizes at about 75Kbytes/s (Kilobytes, not Kilobits as configured!). Then, If I start several parallel downloads of that very same file, each download stabilizes at about 45Kbytes/s; the combined speed of those downloads thus greatly exceeds the configured maximum. Here's what I get when probing tc for debug info [root@kup-gw-02 /]# tc -s qdisc show dev eth1 qdisc htb 1: r2q 1 default 1 direct_packets_stat 1 Sent 17475717 bytes 1334 pkt (dropped 0, overlimits 2782 requeues 0) rate 0bit 0pps backlog 0b 12p requeues 0 [root@kup-gw-02 /]# tc -s class show dev eth1 class htb 1:1 root rate 75000bit ceil 75000bit burst 1608b cburst 1608b Sent 14369397 bytes 1124 pkt (dropped 0, overlimits 0 requeues 0) rate 577896bit 5pps backlog 0b 0p requeues 0 lended: 1 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 class htb 1:10 parent 1:1 prio 0 **rate 75000bit ceil 75000bit** burst 1608b cburst 1608b Sent 14529077 bytes 1134 pkt (dropped 0, overlimits 0 requeues 0) **rate 589888bit** 5pps backlog 0b 11p requeues 0 lended: 1123 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 What I can't for the life of me understand is this: how come I get a "rate 589888bit 5pps" with a config of "rate 75000bit ceil 75000bit"? Why does the effective rate get so much higher than the configured rate? What am I doing wrong? Why is it behaving the way it is? Please help, I'm stumped. Thanks guys.

  Read the article

< Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >