Search Results

Search found 21963 results on 879 pages for 'lance may'.

Page 643/879 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• v2v of RHEL5 box - issues with retaining MAC address

  - by Alex Berry

  For the last week we have been troubleshooting a customer's Red Hat Virtual Machine running on ESXi. We've been using Veeam to try to create a replica off-site and have been having getting it to work on a decent schedule and recently we noticed that there were issues with orphaned snapshots while looking at the datastore. You can see several snapshots in the same folder and it's causing issues with replication and backup, so we decided the cleanest way was to v2v the machine to another datastore so that we had a clean single-vmdk setup to work with, this is where our trouble started. We first started off with a v2v using vmware converter and connecting to the powered on machine as we were having issues doing an offline v2v. This copied fine but when I tried to set a static MAC using this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=507 the new VM wouldn't take the address, it simply obtained a new MAC, received a dhcp lease and then would only boot up to a blank red screen, never the login screen. So the next step was to do an offline v2v, once we finally got it working. Same thing, followed the kb to the letter and still it wouldn't take the MAC. I then tried it again and upon completion I compared both old and new VMX file, copying every identifier and variable possible, then unregistered both VMs, uploaded the new VMX file and booted, only to see the same results. Finally I did the same as above but I copied the disk using DD to a second attached vmdk and then attached this to the new VM, and still no luck. After downloading the modified VMX file after the first boot and comparing it to the original I created I found that the bios uuid had changed from the one I typed in manually, so I'm assuming this may be the snagging point, but I have no idea. I've never had this issue before on a P2V and I'm just wondering if someone could shed some light on this, maybe it's to do with RHEL licencing?

  Read the article

• Running multiple copies of openssh-server (sshd) on Ubuntu

  - by cecilkorik

  I may be attacking this problem the wrong way, if so let me know. I have a server which is available through SSH from both the public internet and the local LAN. I would like to have two very different security policies for each, by running two copies of sshd with two different sshd_config files each on a different port. Some of the things I'd like to change is to allow password or public-key authentication on the LAN, but public-key only from the internet. All (real) users could login from the LAN side, but only certain authorized users would be individually whitelisted to login through the internet. As far as I can tell this requires having two different SSH daemons running on different ports with different sshd_configs. I am fine with the different ports part, I can easily forward port 22 to any port I want through my firewall. So my question is what is the best way to actually START the second sshd under Ubuntu 10.04 LTS. Is there a recommended way to do something like this? Surely I am not the first person with this sort of need. I have a bit of experience with upstart, and I can manually hack the second sshd into /etc/init/ssh.conf I suppose but I'm not sure if that will get overwritten by the package. However I do it, It's important to ensure both sshd processes always get restarted after any automatic or manual upgrade of the openssh-server package. Thanks in advance.

  Read the article

• Server not accepting uploads

  - by Tatu Ulmanen

  I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Internet Explorer will not open

  - by KCotreau

  I recently migrated a company to a Microsoft domain environment, logged the users in under their new domain accounts, and then copied the old profiles to the new profile. I am not sure if that is related since they did not complain about it right away and it may have been a subsequent patch or something, but I have two XP computers that will not open IE8. You click on it, and it nothing graphically happens at all, but you can see a process in task manager. If you click many times, you get multiple instances. It will appear often TWICE per click. It still works in the old profile, so it is specific to the profile, and I would like to fix it rather than blow it away. Here is what I have done without success: Tried opening without add-ons (the one in System Tools) Reinstalled IE8 Ran SFC /SCANNOW I found a script that was supposed to repair any registry entries, and ran it. I tried exporting the whole HKCU\Software\Microsoft\Internet Explorer key and deleting it, hoping that when I restarted it, it would recreate it...No joy. I restored it. Any ideas?

  Read the article

• Building PHP For MacOS

  - by Eray

  I was using XAMPP and decided to uninstall it and use MacOS' in-built apache and php modules. But while uninstalling XAMPP I deleted /usr/bin/php files and other PHP-CLI files accidentally. And I decided to install newest version of PHP (5.5.12) instead of rebuilding current version (5.4.24). Downloaded it and unzip. After this executed this command as mentioned at this guide. ./configure '--with-apxs2=/usr/sbin/apxs' '--enable-cli' '--with-config-file-path=/etc' '--with-zlib=/usr' '--enable-bcmath' '--with-bz2=/usr' '--enable-calendar' '--disable-cgi' '--with-curl=/usr' '--enable-dba' '--enable-ndbm=/usr' '--enable-exif' '--enable-fpm' '--enable-ftp' '--with-gd' '--enable-gd-native-ttf' '--enable-mbregex' '--with-mysql=mysqlnd' '--with-mysqli=mysqlnd' '--with-pear' '--with-pdo-mysql=mysqlnd' '--with-mysql-sock=/var/mysql/mysql.sock' '--with-tidy' '--enable-wddx' '--with-xmlrpc' '--enable-zip' make make install When i check phpinfo() , it's still version 5.4.24 . This line from my httpd.conf LoadModule php5_module libexec/apache2/libphp5.so /usr/libexec/apache2/libphp5.so coming from old version and i couldn't ind libphp5.so for new version. There is no libphp5.so file inside modules dir. How can i use new PHP build with Apache ? UPDATE Results of php -v command . PHP 5.5.12 (cli) (built: May 27 2014 05:17:21) Copyright (c) 1997-2014 The PHP GroupZend Engine v2.5.0, Copyright (c) 1998-2014 Zend Technologies

  Read the article

• EC2 instances keep becoming inaccessible via SSH, can I use elastic loadbalancer to check SSH connectivity?

  - by Rick

  This is mainly an issue for my development ec2 server as it seems that my instance keeps becoming inaccessible via SSH. It happened yesterday so I killed that one and started a new one and happened again later today. The server still works, my web application is accessible in a web browser but whenever I try to connect via SSH I get a pemrission denied (public key) error message in my terminal. I am 100% sure I am doing nothing wrong as I can create a new instance of the exact same AMI (its a personal custom AMI), change absolutely nothing, including using the same .pem key, and then am able to SSH into that new instance using the exact same command as before (just changing the IP address). I understand that ec2 can have issues but having this happen every day seems a bit odd.. I am using an m2.xlarge instance so I don't know if these tend to be unstable, in the past I have used a small instance and had it running for months with no problems which is why I find this so odd. I am looking into using loadbalancing but it seems the only "health" checks they offer is for http or tcp so I'm not sure if I can make it monitor for SSH connectivity. This is important for development as I may make 1-2 new pushes of an application a day and use SSH to do this. I have a designer that needs to have the app always accessible as he works with the front-end files to test output with the live application. Anyways, any advice / info is appreciated

  Read the article

• Metacity/Compiz not staring upon Login Ubuntu 10.10

  - by Ryan Lanciaux

  TLDR: As of this afternoon, I do not have a window manager when I login to Ubuntu 10.10. I would like to have window manager on login without needing to add to startup. Just started using linux again as my home OS. (Used it for a long time years ago but been on windows up until this past weekend) so this may be kind of n00b-ish :) Anyways, up until today, everything on my machine was running okay. I did not have compiz running as the default wm because I'm running NVidia Drivers and Xinerama (and as I understand Xinerama & Compiz don't work well together). I made no changes to my xorg / etc but today when I logged in, I had to manually start metacity from command line to get any window manager. Really not sure what would be causing this or what I can do to get it working again. My xorg.conf is available here: https://gist.github.com/845618. My default Window Manager is set to /usr/bin/metacity in Configuration Editor under /desktop/gnome/applications/window_manager. p.s. Any tips on how to run 3 monitors where I can move windows between screens without Xinerama would be appreciated but that's prolly for another thread :)

  Read the article

• Sane patch schedule for Windows 2003 cluster

  - by sixlettervariables

  We've got a cluster of 75 Win2k3 nodes at work in a coarse grained compute cluster. The cluster is behind a mountain of firewalls and resides in its own VLAN. Jobs of all sizes and types run on the cluster and all of the executables running are custom-made. (ed: additional notes on our executables) The jobs range from 30 seconds to 7 days in duration, and may contain one executable or 2000 sub-jobs (of short duration). Obviously we are trying to avoid the situation where our IT schedules a reboot during a 7 day production job. We have scheduling software which accomodates all of the normal tasks for a coarse grained cluster and we can control which machines are active for submission, etc. If WSUS was in some way scriptable (or the client could state it's availability for shutdown) we could coordinate the two systems and help out. Currently, the patch schedule is the Sunday after Super Tuesday regardless of what is running on the cluster. We have to ask for an exemption every time we want to delay patching a machine for a long running production job. Basically, while our group is responsible for the machines we have little control over IT's patch schedule. Is patching monthly with MS's schedule sane for a production Windows cluster? Are there software hooks in WSUS where we could say, "please don't reboot just yet"?

  Read the article

• All applications quit when printing on imac OS 10.5.8

  - by Tamany

  Hello and hoping someone might be able to help. Recently ran software update (not sure if problems are associated with this but pretty sure they are as i printed successfully before update. checked log at time of printing: any thoughts on how to fix this? THANKYOU!! 03/05/2010 22:03:15 Microsoft Word[697] * -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x17a82b50 03/05/2010 22:03:15 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:17 [0x0-0x51051].com.microsoft.Word[697] Mon May 3 22:03:17 leopards-imac-2.local Word[697] : The function CGPDFDocumentGetMediaBox' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please useCGPDFPageGetBoxRect' instead. 03/05/2010 22:22:09 Microsoft Word[697] * -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x1b036500

  Read the article

• Cisco 3560+ipservices -- IGMP snooping issue with TTL=1

  - by Jander

  I've got a C3560 with Enhanced (IPSERVICES) image, routing multicast between its VLANs with no external multicast router. It's serving a test environment where developers may generate multicast traffic on arbitrary addresses. Everything is working fine except when someone sends out multicast traffic with TTL=1, in which case the multicast packet suppression fails and the traffic is broadcast to all members of the VLAN. It looks to me like because the TTL is 1, the multicast routing subsystem doesn't see the packets, so it doesn't create a mroute table entry. If I send out packets with TTL=2 briefly, then switch to TTL=1 packets, they are filtered correctly until the mroute entry expires. My question: is there some trick to getting the switch to filter the TTL=1 packets, or am I out of luck? Below are the relevant parts of the config, with a representative VLAN interface. I can provide more info as needed. #show run ... ip routing ip multicast-routing distributed no ip igmp snooping report-suppression ! interface Vlan44 ip address 172.23.44.1 255.255.255.0 no ip proxy-arp ip pim passive ... #show ip igmp snooping vlan 44 Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled IGMPv3 snooping (minimal) : Enabled Report suppression : Disabled TCN solicit query : Disabled TCN flood query count : 2 Robustness variable : 2 Last member query count : 2 Last member query interval : 1000 Vlan 44: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY Robustness variable : 2 Last member query count : 2 Last member query interval : 1000

  Read the article

• Games, Windows 8.1 and 144Hz display

  - by Marioysikax

  So I have been having problems with few games after switching from 7 to 8.1, which seems to be related to my 144Hz monitor. Few examples: Shank, Shank 2, Blood of the Werewolf, Astebreed, the Sims 2 and Rayman Legends patch 1.2Had few other as well but it's been long and I have 600+ steam library. From those games at least the Sims 2 and Shank worked without any problems with same setup and Windows 7. So basically these games simply refuse to launch with basic setup. However if I plug 60Hz TV with HDMI instead everything magically starts to work. As for Astebreed and the Sims 2 using windowed mode seems to also work. As for Rayman Demo and version 1.0 works for some reason and 1.2 breaks settings menu. I have already tried contacting supports. EA support stated game simply shouldn't work with 8.1 at all (which is lie as it works with that TV and friend with 8 plays just fine), ubisoft support took few weeks and support said he will forward info for further processing, blood of the werewolf support had no idea what's going on and told me to just use my TV instead.Changing monitors refresh rate to 120Hz or forcing it to 60Hz doesn't do anything. I have DVI right now but I will try with DisplayPort when I get the cable. At PCGW Garrett said it may have something to do how listing resolutions work with 8 compared to earlier Windows versions but my googling skills don't bring anything up and compatibility mode for earlier windows version doesn't work either (not that I expected that to work). My system specs are on my steam profile. How do I get those work with my 144Hz monitor as well as possible future games having same problem? Downgrading to 7 would work but is far from practical and I don't own legit lisence for that one.

  Read the article

• SeLinux blocking connection to sshd on Ubuntu 9.10

  - by Barton Chittenden

  When I try to log on to my laptop, which runs Ubuntu 9.10, the server rejects my login attempts. Checking /var/log/auth.log, I see the following: Feb 14 12:41:16 tiger-laptop sshd[6798]: error: ssh_selinux_getctxbyname: Failed to get default SELinux security context for tiger I googled for this, and ran across the following: http://www.spinics.net/lists/fedora-.../msg13049.html Here's the part that I think relates to the problem that I'm having: Quote: What's wrong on my system? Why it's not possible to login even if selinux is in permissive mode? Any suggestions? I'd start by trying to figure out why sshd isn't running in sshd_t (it seems to be running in sysadm_t). Paul. selinux mailing list selinux@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mail...stinfo/selinux Yes, sshd is running in sysadm_t: ps axZ | grep sshd system_u:system_r:sysadm_t 3632 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pi ls -Z /usr/sbin/sshd system_ubject_r:sshd_exec_t /usr/sbin/sshd Don't know why it's not sshd_t. I didn't modified something. It's a standard installation of sles11 with the default reference policy from tresys. Maybe this code snippet from policy/modules/services/ssh.te is responsible for that: Allow ssh logins as sysadm_r:sysadm_t gen_tunable(ssh_sysadm_login, true) Any ideas? Do you have boolean init_upstart set to on? if not try setting it to on. I do not believe ssh_sysadm_login boolean works currently but i may be mistaken. -- Yeah, setting init_upstart to on did the trick! THANK A LOT! Do you know why this prevents the user from logging in through ssh even if selinux is set to permissive?? Ok, so the million dollar question is "where do I set 'init_upstart=1'"? It's not clear from context which configuration file needs to be edited, and I'm not at all familiar with SELinux configuration.

  Read the article

• Looking for Remote Control that works with everything (even Windows 7 Media Center)

  - by T Reddy

  Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

  Read the article

• WiFi & GbE Slow while Both Active.

  - by Mark Tomlin

  I'm having a problem with my WiFi network connection when I use my wired GbE connection concurrently on my Laptop. I'm using my WiFi for Internet access, and general web surfing and I'm using my GbE connection to connect to my PlayStation so I can stream media. The WiFi connection is via a Linksys 610N connected to my Cable Modem. Where as the GbE connection is a direct connection from my Ethernet port to the Ethernet port of the PS3 via a Cat-5 cable (no router in between this connection). As soon as I connect the cable from the PS3 to my Ethernet port on my Laptop the WiFi connection slows to a halt, but then allows for a connection to the web as normal but at much slower speeds for the things like BitTorrent that stops completely. It seems to me that Windows can't handle both connections at once. It will have both active but it can only accept and send packets on one device at one time. I can get WiFi connections to work to go to websites and the like, but once I use my GbE connection to share media between my Laptop and my PS3 the Wifi connection dies out and I no longer have access to the internet. I setup my connection on the PS3 and the Laptop following the insturctions posted here: http://forums.finalgear.com/problems/s14e01-ps3-size-problem-40642/#post1188132 And the following is the results of my ipconfig. Windows IP Configuration Host Name . . . . . . . . . . . . : dygear Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter WiFi: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-19-**-**-**-** Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.111 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 167.206.254.2 167.206.254.1 Lease Obtained. . . . . . . . . . : Wednesday, May 19, 2010 08:55:30 Lease Expires . . . . . . . . . . : Thursday, May 20, 2010 08:55:30 Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-16-**-**-**-** Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Any ideas?

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• GIT : I keep having to merge my new branch

  - by mnml

  Hi, I have created a new branch and I'm working on it with others dev but for reasons when I want to push my new commits I always have to git merge origin/mynewbranch Otherwise I'm getting some errors: ! [rejected] mynewbranch -> mynewbranch (non-fast-forward) error: failed to push some refs to '[email protected]/repo.git' To prevent you from losing history, non-fast-forward updates were rejected Merge the remote changes before pushing again. See the 'Note about fast-forwards' section of 'git push --help' for details. You asked me to pull without telling me which branch you want to merge with, and 'branch.mynewbranch.merge' in your configuration file does not tell me, either. Please specify which branch you want to use on the command line and try again (e.g. 'git pull <repository> <refspec>'). See git-pull(1) for details. If you often merge with the same branch, you may want to use something like the following in your configuration file: [branch "mynewbranch"] remote = <nickname> merge = <remote-ref> [remote "<nickname>"] url = <url> fetch = <refspec> See git-config(1) for details. Why is it not automatic? Thanks

  Read the article

• Cannot delete flash9.ocx

  - by Kara Marfia

  Some kinda voodoo, indeed. Bought a new boot drive, and it's time to use the old drive for data. I thought I'd save some time by just wiping the unneeded system folders, instead of backing up, formatting, and restoring. Wups! I have a single Adobe file that absolutely will not be deleted. G:\Windows\SysWOW64\Macromed\Flash\flash9.ocx - though it may have started with a different file name. I'm able to rename it, oddly enough. To be clear, the drive is currently plugged in externally. So I can boot the computer, plug this drive in afterward, and immediately attempt to delete. "File in use" box reads "the action can't be completed because the file is open in another program". I'd format at this point, but it's my white whale, and I have to know if Adobe has inserted some nasty little registry hack - or whatever it is - making this impossible. Since I'm sure it'll come up, I've taken ownership of the file - and this was the trick preventing me from deleting anything else on the drive - full rights on the file permissions, you name it, I've fiddled with the file itself. I'm about to try uninstalling flash from the system drive, in case that aligns the planets properly. Sometimes I wish I were less stubborn, and could just format already.

  Read the article

• Insufficient channel capacity of 1GBit

  - by Roman S

  There is a Caching Server (Varnish): it receives data from Amazon S3 on request, saves it for some time and gives it to the client. We have encountered the problem of insufficient channel capacity of 1GBit. Peak load within 4 hours completely chokes the channel. Server performance is sufficient for now. Approximately 4.5TB of data are transmitted per day. More than 100TB are accumulated per month. The first thought that comes to mind is simply to add one more 1GBit port and sleep peacefully until 2GBit are not enough (it may happen quite quickly) or one server is not able to handle it. And then we just need to add new Caching Servers. But now we need a Load Balancer, which will send requests on one and the same URL, always on one and the same server (to avoid multiple copies of the same cached objects). Here are the questions: Does a Balancer need a band equal to sum of all bands of Caching Servers? What shall we do in case there are no ports in a Balancer? Should we add more Balancers or solve the problem by means of Round robin DNS? What are the standard approaches to such problems? Can anyone advise hosting-companies, which can solve this problem? We are interested in American and European markets.

  Read the article

• HP Power Manager SMTP setup doesn't have space for username & password

  - by Martha

  Is there some way to configure HP Power Manager to not assume that there's an email server running locally? We recently acquired an HP T1500 G3 UPS, which we're trying to control using HP Power Manager 4.2. The main reason we wanted to get this particular UPS is because it says it's capable of sending notifications (of the "Yo, the power's out, you may want to look into it" type) via email, as opposed to SNMP. Turns out, that's not entirely true. The server is running Windows Server 2003. It is not running an email server of any sort - we do that via two different providers. Outlook email is provided by Verizon, and our SMTP email service is provided by a small local company. When we use CDO to send auto-generated notification emails, we have to provide the SMTP server name, port, username, and password. The HP Power Manager interface only allows us to enter the server name and the username. Thus, not surprisingly, the emails never go anywhere. Help?

  Read the article

• Suddenly getting lock timeouts with MySQL

  - by Marc Hughes

  We've got a web app hosted on Amazon Web services. Our database is a multi-az RDS MySQL server running 5.1.57 and 3-4 app servers talk to it. Today, we started seeing a lot of errors along the lines of "Lock wait timeout exceeded; try restarting transaction" - almost 1% of POST requests are seeing this. There have been no modifications to the code running on the site. There have been no schema changes. We haven't had a big spike in traffic. I've been looking at the processes running, and none seem out of control. I tried scaling our RDS instance from a small to a large, with no effect. Two days ago, Amazon had some outages. As part of the recovery from that, our RDS server, and our app servers ended up in different availability zones, but all within the same region. But yesterday, everything was fine so I'm not convinced that's related. The lock timeouts are in different types of requests and occur in different InnoDB tables. I have noticed the number of open connections jumped when we started seeing problems, but they may be a symptom and not a cause. What are my next steps in debugging this?

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >