Search Results

Search found 17627 results on 706 pages for 'custom reports'.

Page 645/706 | < Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• Touch gestures in IE not working without explorer.exe being run once

  - by Michael

  Edit: Rephrasing my question: Upon further troubleshooting, I can conclude that: Touch gestures (dragging, pinch to zoom, touch-and-hold right click) in Internet Explorer start to work when: The system has been running for ~2 minutes. This coincides with the delayed start of services. Explorer.exe is being run, then killed. I assume Explorer.exe starts some services? The services with delayed start are as follows: Security Center Software Protection Windows Defender, Search and Update Windows Font Cache Service Microsoft .NET Framework NGEN v4.0.30319_X64 and X86 I see no connection between these services and touch gestures, but just in case, I manually tried starting these services, but without luck. What else happens delayed after system boot, which also happens when explorer is started? Old question: Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly?

  Read the article

• cf3 Can't stat ... in files.copyfrom promise

  - by Xerxes

  On the client: # cf-agent -KIv ... cf3 -> Handling file existence constraints on /etc/cfengine3 cf3 -> Copy file /etc/cfengine3 from /srv/cfengine/sysconf/server/inputs check cf3 No existing connection to 172.31.69.83 is established... cf3 Set cfengine port number to 5308 = 5308 cf3 -> Connect to 172.31.69.83 = 172.31.69.83 on port 5308 cf3 LastSaw host 172.31.69.83 now cf3 Loaded /var/lib/cfengine3/ppkeys/root-172.31.69.83.pub cf3 .....................[.h.a.i.l.]................................. cf3 Strong authentication of server=172.31.69.83 connection confirmed cf3 Server returned error: Unspecified server refusal (see verbose server output) cf3 Can't stat /srv/cfengine/sysconf/server/inputs in files.copyfrom promise cf3 ?> defining promise result class Cfengine_Inputs_Updated_Failed .... cf3 ......................................................... cf3 Promise handle: cf3 Promise made by: [cf-agent.cf ] FAILED 172.31.69.83:///srv/cfengine/sysconf/server/inputs -> localhost:///etc/cfengine3 However, on the server (172.31.69.83), there's no reason why it can't stat the directory: cyrus:/srv/cfengine/sysconf/server# ls -l /srv/cfengine/sysconf/server/inputs total 52 -rw-r--r-- 1 root root 2142 Sep 6 21:54 cf-agent.cf -rw-r--r-- 1 root root 831 Sep 6 18:31 cf-execd.cf -rw-r--r-- 1 root root 4517 Sep 6 21:44 cf-serverd.cf -rw-r--r-- 1 root root 3082 Sep 6 21:44 dns.cf -rw-r--r-- 1 root root 2028 Sep 6 15:12 failsafe.cf -rw-r--r-- 1 root root 5966 Sep 6 21:44 ldap-masters.cf -rw-r--r-- 1 root root 4380 Sep 6 18:31 ldap-security.cf -rw-r--r-- 1 root root 2735 Sep 6 08:21 lib-core.cf -rw-r--r-- 1 root root 1506 Sep 6 21:45 lib-utils.cf -rw-r--r-- 1 root root 2635 Sep 6 20:27 lib-vars.cf -rw-r--r-- 1 root root 2057 Sep 3 17:46 nss.cf -rw-r--r-- 1 root root 1472 Sep 6 18:31 packages.cf -rw-r--r-- 1 root root 1257 Sep 6 18:01 pam-security.cf -rw-r--r-- 1 root root 4019 Sep 6 19:32 promises.cf -rw-r--r-- 1 root root 2808 Sep 3 17:22 site.cf -rw-r--r-- 1 root root 1670 Sep 6 18:31 sudo-security.cf -rw-r--r-- 1 root root 831 Sep 6 18:31 sys-security.cf -rw-r--r-- 1 root root 890 Sep 6 18:31 sys-users.cf cyrus:/srv/cfengine/sysconf/server# I don't see anything interesting server side either when running: /usr/sbin/cf-serverd -d4 --verbose --no-fork And the following does not have any complaints: /usr/sbin/cf-promises -v Any ideas? I'm running cfengine3 on debian, v3.0.5+dfsg-1 - and the cf-agent.cf file is as follows: bundle agent Update { files: linux:: "${cf3.path[inputs]}" action => immediate, move_obstructions => "true", depth_search => Recursive, copy_from => MirrorFrom( "${cf3.host[server]}", "${cf3.path[scm-inputs]}", "true", "0400" ), classes => DefineSoftClass("Cfengine_Inputs_Updated") ; "${cf3.path[sbin]}" comment => "Setting cf3 client sbin scripts: ${cf3.path[sbin]}/", action => immediate, depth_search => Recursive, copy_from => MirrorFrom( "${cf3.host[server]}", "${cf3.path[scm-cnt-scripts]}", "false", "0555" ) ; reports: Cfengine_Inputs_Updated:: "[cf-agent.cf ] Services:CFAgent:Inputs:Updated"; Cfengine_Inputs_Updated_Failed:: "[cf-agent.cf ] FAILED ${cf3.host[server]}://${cf3.path[scm-inputs]} -> localhost://${cf3.path[inputs]}"; } I lie, there is something interesting with a little more debugging... AccessControl(/srv/cfengine/sysconf/server/inputs) AccessControl, match(/srv/cfengine/sysconf/server/inputs,client.com.au) encrypt request=1 Examining rule in access list (/srv/cfengine/sysconf/server/inputs,/home/cfengine)? cf3 Host client.com.au denied access to /srv/cfengine/sysconf/server/inputs Unappending Host client.com.au denied access to /srv/cfengine/sysconf/server/inputs cf3 Access control in sync Unappending Access control in sync Transaction Send[t 59][Packed text] Attempting to send 67 bytes SendSocketStream, sent 67 cf3 From (host=client.com.au,user=root,ip=172.31.69.3) Unappending From (host=client.com.au,user=root,ip=172.31.69.3) cf3 REFUSAL of request from connecting host: (SYNCH 1283777156 STAT /srv/cfengine/sysconf/server/inputs) Unappending REFUSAL of request from connecting host: (SYNCH 1283777156 STAT /srv/cfengine/sysconf/server/inputs) RecvSocketStream(8) cf3 -> Accepting a connection I'll keep looking.

  Read the article

• which package i should choose, if i want to install virtualenv for python?

  - by hugemeow

  pip search just returns so many matches, i am confused about which package i should choose to install .. should i only install virtualenv? or i'd better also install virtualenv-commands and virtualenv-commands, etc, but i really don't know exactly what virtualenv-commands is ... mirror0@lab:~$ pip search virtualenv virtualenvwrapper - Enhancements to virtualenv virtualenv - Virtual Python Environment builder veh - virtualenv for hg pyutilib.virtualenv - PyUtilib utility for building custom virtualenv bootstrap scripts. envbuilder - A package for automatic generation of virtualenvs virtstrap-core - A bootstrapping mechanism for virtualenv+pip and shell scripts tox - virtualenv-based automation of test activities virtualenvwrapper-win - Port of Doug Hellmann's virtualenvwrapper to Windows batch scripts everyapp.bootstrap - Enhanced virtualenv bootstrap script creation. orb - pip/virtualenv shell script wrapper monupco-virtualenv-python - monupco.com registration agent for stand-alone Python virtualenv applications virtualenvwrapper-powershell - Enhancements to virtualenv (for Windows). A clone of Doug Hellmann's virtualenvwrapper RVirtualEnv - relocatable python virtual environment virtualenv-clone - script to clone virtualenvs. virtualenvcontext - switch virtualenvs with a python context manager lessrb - Wrapper for ruby less so that it's in a virtualenv. carton - make self-extracting virtualenvs virtualenv5 - Virtual Python 3 Environment builder clever-alexis - Clever redhead girl that builds and packs Python project with Virtualenv into rpm, deb, etc. kforgeinstall - Virtualenv bootstrap script for KForge pypyenv - Install PyPy in virtualenv virtualenv-distribute - Virtual Python Environment builder virtualenvwrapper.project - virtualenvwrapper plugin to manage a project work directory virtualenv-commands - Additional commands for virtualenv. rjm.recipe.venv - zc.buildout recipe to turn the entire buildout tree into a virtualenv virtualenvwrapper.bitbucket - virtualenvwrapper plugin to manage a project work directory based on a BitBucket repository tg_bootstrap - Bootstrap a TurboGears app in a VirtualEnv django-env - Automaticly manages virtualenv for django project virtual-node - Install node.js into your virtualenv django-environment - A plugin for virtualenvwrapper that makes setting up and creating new Django environments easier. vip - vip is a simple library that makes your python aware of existing virtualenv underneath. virtualenvwrapper.django - virtualenvwrapper plugin to create a Django project work directory terrarium - Package and ship relocatable python virtualenvs venv_dependencies - Easy to install any dependencies in a virtualenviroment(without making symlinks by hand and etc...) virtualenv-sh - Convenient shell interface to virtualenv virtualenvwrapper.github - Plugin for virtualenvwrapper to automatically create projects based on github repositories. virtualenvwrapper.configvar - Plugin for virtualenvwrapper to automatically export config vars found in your project level .env file. virtualenvwrapper-emacs-desktop - virtualenvwrapper plugin to control emacs desktop mode bootstrapper - Bootstrap Python projects with virtualenv and pip. virtualenv3 - Obsolete fork of virtualenv isotoma.depends.zope2_13_8 - Running zope in a virtualenv virtual-less - Install lessc into your virtualenv virtualenvwrapper.tmpenv - Temporary virtualenvs are automatically deleted when deactivated isotoma.plone.heroku - Tooling for running Plone on heroku in a virtualenv gae-virtualenv - Using virtualenv with zipimport on Google App Engine pinvenv - VirtualEnv plugins for pin isotoma.depends.plone4_1 - Running plone in a virtualenv virtualenv-tools - A set of tools for virtualenv virtualenvwrapper.npm - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any npm installed globaly when the venv is activated d51.django.virtualenv.test_runner - Simple package for running isolated Django tests from within virtualenv difio-virtualenv-python - Difio registration agent for stand-alone Python virtualenv applications VirtualEnvManager - A package to manage various virtual environments. virtualenvwrapper.gem - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any gems installed when the venv is activated

  Read the article

• xterm not wrapping text properly

  - by mulllhausen

  I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

  Read the article

• Graphite SQLite3 DatabaseError: attempt to write a readonly database

  - by Anadi Misra

  Running graphite under apache httpd, with slqite database, I have the correct folder permissions [root@liaan55 httpd]# ls -ltr /var/lib | grep graphite drwxr-xr-x. 2 apache apache 4096 Aug 23 19:36 graphite-web and [root@liaan55 httpd]# ls -ltr /var/lib/graphite-web/ total 68 -rw-r--r--. 1 apache apache 65536 Aug 23 19:46 graphite.db syncdb also seems to have gone fine [root@liaan55 httpd]# sudo -su apache bash-4.1$ whoami apache bash-4.1$ python /usr/lib/python2.6/site-packages/graphite/manage.py syncdb /usr/lib/python2.6/site-packages/graphite/settings.py:231: UserWarning: SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security warn('SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security') /usr/lib/python2.6/site-packages/django/conf/__init__.py:75: DeprecationWarning: The ADMIN_MEDIA_PREFIX setting has been removed; use STATIC_URL instead. "use STATIC_URL instead.", DeprecationWarning) /usr/lib/python2.6/site-packages/django/core/cache/__init__.py:82: DeprecationWarning: settings.CACHE_* is deprecated; use settings.CACHES instead. DeprecationWarning Creating tables ... Creating table account_profile Creating table account_variable Creating table account_view Creating table account_window Creating table account_mygraph Creating table dashboard_dashboard_owners Creating table dashboard_dashboard Creating table events_event Creating table auth_permission Creating table auth_group_permissions Creating table auth_group Creating table auth_user_user_permissions Creating table auth_user_groups Creating table auth_user Creating table django_session Creating table django_admin_log Creating table django_content_type Creating table tagging_tag Creating table tagging_taggeditem You just installed Django's auth system, which means you don't have any superusers defined. Would you like to create one now? (yes/no): yes Username (leave blank to use 'apache'): root E-mail address: [email protected] Password: Password (again): Superuser created successfully. Installing custom SQL ... Installing indexes ... Installed 0 object(s) from 0 fixture(s) bash-4.1$ exit and the local-settings.py file is as follows STORAGE_DIR = '/var/lib/graphite-web' INDEX_FILE = '/var/lib/graphite-web/index' DATABASES = { 'default': { 'NAME': '/var/lib/graphite-web/graphite.db', 'ENGINE': 'django.db.backends.sqlite3', 'USER': '', 'PASSWORD': '', 'HOST': '', 'PORT': '' } } I still get this error [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] File "/usr/lib/python2.6/site-packages/django/db/backends/sqlite3/base.py", line 344, in execute [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] return Database.Cursor.execute(self, query, params) [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] DatabaseError: attempt to write a readonly database not sure what is missing in this configuration

  Read the article

• An alternative to Google Talk, AIM, MSN, et al [closed]

  - by mkaito

  I'm not entirely sure whether this part of stack exchange is the most adequate for my question, but it would seem to me that people sharing this kind of concern would converge either here, or possibly on a more unix-specific sub site. Either way, here goes. Background Feel free to skip to The Question, below. This should, however, help those interested understand where I'm coming from, and where I expect to get, messaging-wise. My online talking place-to-go has been IRC for the last fifteen years. I think it's a great protocol, and clients out there are very good. I still use, and will always continue to use IRC for most of my chat needs. But then, there is private instant messaging. While IRC can solve this with queries and DCC chats, the protocol just isn't meant to work too well on intermittent connections, such as a mobile device, where you can often walk around places with low signal. I used MSN for a while, but didn't like it. The concept was awesome, but I think Microsoft didn't get the implementation quite right. When they started adding all that eye candy, and my buddies started flooding me with custom icons and buzzing my screen to it's knees, I shut my account and told folks that missed me to just email or call me. Much whining happened, I got called many weird things for not using MSN, but folks eventually got over it. Next, Google Talk came along, and seemed to be a lot better than MSN ever was. The protocol was open, so I could use whatever client I felt a fancy for. With the advent of smart phones, I just got myself a gtalk client on the phone, and have had a really decent integrated mostly-universal IM solution. Over the last few months, all Google services have been feeling flaky. IMs will often arrive anywhere between twenty minutes and one hour after being sent, clients will randomly disconnect, client priorities seem to work sometimes, and sometimes just a random device of those connected will get an IM. I think the time has come to look for greener grass. The Question It's rather hard to put what I'm looking for into precise words. I guess I just want something that is kind of like MSN/Gtalk, but that doesn't let me down when I need it. IRC is pretty much perfect, but the protocol just isn't designed to work well on mobile devices. Really, at this point I'm considering sticking to IRC for desktop messaging, and SMS/email on the phone, but I hope that in this day and age there is something better out there.

  Read the article

• Logrotate not doing any rotation

  - by blizz

  I just set up LogRotate on my RHEL6 server so that it rotates my custom Apache log files. However, it doesn't do anything when i try manually running it. I expect it to rotate the log files "access.log" and "err.log". They have been there for a few days and need to be rotated. Here is the output: [root@pc1 httpd]# logrotate -d -f /etc/logrotate.d/apache reading config file /etc/logrotate.d/apache reading config info for /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log Handling 1 logs rotating pattern: /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log forced from command line (no old logs will be kept) empty log files are rotated, old logs are removed considering log /var/log/httpd/access_log log needs rotating considering log /var/log/httpd/error_log log needs rotating considering log /var/www/html/NSLogs/access.log log needs rotating considering log /var/www/html/NSErrorLogs/err.log log needs rotating rotating log /var/log/httpd/access_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/access_log to /var/log/httpd/access_log-20131023 disposeName will be /var/log/httpd/access_log-20131023.gz running postrotate script running script with arg /var/log/httpd/access_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/access_log-20131023.gz error: error opening /var/log/httpd/access_log-20131023.gz: No such file or directory rotating log /var/log/httpd/error_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/error_log to /var/log/httpd/error_log-20131023 disposeName will be /var/log/httpd/error_log-20131023.gz running postrotate script running script with arg /var/log/httpd/error_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/error_log-20131023.gz error: error opening /var/log/httpd/error_log-20131023.gz: No such file or directory rotating log /var/www/html/NSLogs/access.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSLogs/access.log to /var/www/html/NSLogs/access.log-20131023 disposeName will be /var/www/html/NSLogs/access.log-20131023.gz running postrotate script running script with arg /var/www/html/NSLogs/access.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSLogs/access.log-20131023.gz error: error opening /var/www/html/NSLogs/access.log-20131023.gz: No such file or directory rotating log /var/www/html/NSErrorLogs/err.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSErrorLogs/err.log to /var/www/html/NSErrorLogs/err.log-20131023 disposeName will be /var/www/html/NSErrorLogs/err.log-20131023.gz running postrotate script running script with arg /var/www/html/NSErrorLogs/err.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSErrorLogs/err.log-20131023.gz error: error opening /var/www/html/NSErrorLogs/err.log-20131023.gz: No such file or directory

  Read the article

• WSUS 3.0 SP2 installation fails at "configuring database" step.

  - by flashkube

  Attempting to install WSUS 3.0 SP2 on a Windows Server 2003 Enterprise system. I'm asking the setup to create a new database on one of our existing SQL Server 2005 systems. When the setup gets to the "configuring database" step it stops and throws "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." The two logs it suggests I look at are below. I'm not seeing any errors that mean anything to me. Any direction you can give will be greatly appreciated. WSUSSetup.log: 2009-12-04 15:26:21 Success MWUSSetup Validating pre-requisites... 2009-12-04 15:26:22 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.) 2009-12-04 15:26:28 Success MWUSSetup No SQL instances found 2009-12-04 15:26:42 Success MWUSSetup Initializing installation details 2009-12-04 15:26:42 Success MWUSSetup Installing ASP.Net 2009-12-04 15:27:24 Success MWUSSetup ASP.Net is installed successfully 2009-12-04 15:27:24 Success MWUSSetup Installing WSUS... 2009-12-04 15:27:28 Success CustomActions.Dll Unable to get INSTALL_LANGUAGE property, calculating it... 2009-12-04 15:27:28 Success CustomActions.Dll Successfully set propery of WSUS admin groups' full names 2009-12-04 15:27:29 Success CustomActions.Dll .Net framework path: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Reporters with Description: WSUS Administrators who can only run reports on the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Reporters user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Administrators with Description: WSUS Administrators can administer the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Administrators user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS user groups 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Successfully set binary SID properties 2009-12-04 15:28:50 Error MWUSSetup InstallWsus: MWUS Installation Failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CInstallDriver::PerformSetup: WSUS installation failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.) From the end of WSUSSetupmsi_091204_1527.log MSI (s) (58:7C) [15:28:49:860]: Note: 1: 1708 MSI (s) (58:7C) [15:28:49:860]: Product: Windows Server Update Services 3.0 SP2 -- Installation failed. MSI (s) (58:7C) [15:28:49:875]: Cleaning up uninstalled install packages, if any exist MSI (s) (58:7C) [15:28:49:875]: MainEngineThread is returning 1603 MSI (s) (58:78) [15:28:49:985]: Destroying RemoteAPI object. MSI (s) (58:90) [15:28:49:985]: Custom Action Manager thread ending. === Logging stopped: 12/4/2009 15:28:49 === MSI (c) (30:54) [15:28:50:016]: Decrementing counter to disable shutdown. If counter = 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (30:54) [15:28:50:016]: MainEngineThread is returning 1603 === Verbose logging stopped: 12/4/2009 15:28:50 ===

  Read the article

• OS X Snow Leopard 10.6 Refuses to Load Websites the first time intermittently

  - by Brandon

  Many times when I am browsing the web, Snow Leopard will sit and load a site for 20 seconds or more, until it times out and says it cannot be displayed. If I refresh, it loads RIGHT away, every time. The issue is intermittent but happens from once every couple of days to a few times a day. So the long and short of it is this: Aluminum MacBook (Non-Pro) 2.4GHz Core2Duo, 4GB DDR3 I am using 10.6.6 but I have had this issue since 10.6.0 It happens in Firefox, Chrome, and Safari I have flushed my DNS (using the command 'blablabla flush') I am using custom DNS servers which I hoped would fix it but it had no effect* I am running Apache currently but haven't been for most of the time I've reformatted multiple times, always experiencing the issue I am on Cox cable internet, with a Motorola Surfboard & a Belkin F6D4230-4 v1 (Pre?) N wireless router. I've put the router in G only & N only & G+N to no effect It seems to be domain dependant as I can sometimes load the Google cache right away, and sometimes other sites will load but Google will refuse My Powerbook G4 with Leopard, other Windows XP laptops, & my wired Win7 desktop do not suffer from the issue. *I recently started using these to escape the awful Cox redirect page on timeouts I'm almost positive the issue has happened on other networks but I can't recall a specific instance (I have a terrible memory). The problem is intermittent and fixable enough (I just have to wait until it times out and hit refresh one time) but incredibly annoying since I'm constantly reading documentation from a large variety of sites. EDIT: To clarify, this happens with ALL sites, not only specific sites. I haven't been able to detect any pattern to the failures, but one day Google.com will refuse to load while reddit.com will, and the next day vice versa. Keep in mind that waiting for a timeout and hitting refresh loads the page right away, every time. If I don't wait for the timeout, opening more links, hitting refresh, and clicking the link a billion times have no effect. It seems to be domain neutral, affecting sites seemingly at random. It doesn't seem to have anything to do with connection inactivity either, because I will be SSHed into different servers, uploading files, browsing, downloading, etc, and it will just quit loading Jquery.com (for example) until I sit and wait for a timeout. /EDIT This is my last resort. Please, someone, tell me what is happening. Thank you.

  Read the article

• Flash was "not designed to function across LANs". Any workarounds?

  - by Triynko

  See: http://helpx.adobe.com/flash/kb/problems-using-flash-authoring-across.html Issue When using Adobe Flash across a local area network (LAN) and networked drives/folders, you may experience any of the following problems:" Flash crashes while performing a test movie on FLA files located on a networked drive or folder. FLA files get corrupted when opening from or saving to networked drives or folder. Flash does not reflect changes in custom class after compiling. Flash, Flash Video Encoder, or Adobe Media Encodercrashes or corrupts Flash Video (FLV) files while encoding source located on networked drives or folder. Flash Video Encoder or Adobe Media Encoder crashes or corrupts FLV files where the output folder is a networked drive or folder. Published Flash Player (SWF) files and projectors are unable to load content located on networked drives or folder. More than one instance of a SWF or Projector on client machines cannot play back FLV files located on a networked drive or folder. Reason The Adobe Flash IDE, FLV Encoder, Adobe Media Encoderand Flash Player were not designed to function across LANs. Solution Use of Flash files across local networks is not supported in any context. Published content should access data through a web server. All file sources should be opened and saved on the local system. Using Flash in such a scenario for project collaboration or content deployment is highly discouraged and may corrupt your source files. If you need to work in a collaborative environment or store source files on a server, use the project panel and/or a third-party version control system. SERIOUSLY? I cannot work on files located on a mapped network drive? How did they mess that one up? Does the Flash IDE really open the source file and wipe it clean to do the saving, rather than saving a copy first then replacing it as an atomic file system operation? How hard would it be for them make a dummy temporary file for saving then issue a MOVE command? Any workarounds for this, like something that can make a network drive as stable as a local drive, like some kind of automatic local caching and synching?

  Read the article

• Getting Classic ASP to work in .js files under IIS 7

  - by Abdullah Ahmed

  I am moving a clients classic asp webapp to a new IIS7 based server. The site contains some .js files which have javascript but also classic asp in <% % tags which contains a bunch of conditional statements designed to spit out pieces of javascript based on session state variables. Here's a brief example of what the file could be like.... var arrHOFFSET = -1; var arrLeft ="<"; var arrRight = ">"; <% If ((Session("dashInv") = "True") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4"))) Then %> addMainItem("/MgmtTools/WelcomeInventory.asp?wherefrom=salesMan","",81,"center","","",0,0,"","","","",""); <% Else %> <% If (Session("dashInv") = "False") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4")) Then %> <% Else %> addMainItem("/calendar/welcome.asp","",81,"center","","",0,0,"","","","",""); <% End If %> <% End If %> defineSubmenuProperties(135,"center","center",-3,0,"","","","","","",""); Currently this file (named custom.js for example) will start throwing js errors, because the server doesnt seem to recognize the asp code in it and therefore does not parse it. I know I need to somehow specify that a .js file should also be treated like an .asp file and run through parsing it. However I am not sure how to go about doing this. Here is what I've tried so far... Under the Server node in IIS under HANDLER MAPPINGS I created a new Script Map with the following settings. Request Path: *.js Executable: C:\Windows\System32\inetsrv\asp.dll Name: ASPClassicInJSFiles Mapping: Invoke Handler only if request is mapped to : File Verbs: All verbs Access: Script I also created a similar handler under the site node itself. Under MIME Types .js is defined as application/x-javascript None of these work. If I simply rename the file to have .asp extension then things work, however this app is poorly coded and has literally 100's of files with the .js files included in them under various names and locations, so rename, search and replace is the last option I have.

  Read the article

• .htaccess working on remote server but does not work on localhost. Getting 404 errors on localhost

  - by Afsheen Khosravian

  MY PROBLEM: When I visit localhost the site does not work. It shows some text from the site but it seems the server can not locate any other files. Here is a snippet of the errors from firebug: "NetworkError: 404 Not Found - localhost/css/popup.css" "NetworkError: 404 Not Found - localhost/css/style.css" "NetworkError: 404 Not Found - localhost/css/player.css" "NetworkError: 404 Not Found - localhost/css/ui-lightness/jquery-ui-1.8.11.custom.css" "NetworkError: 404 Not Found - localhost/js/jquery.js" It seems my server is looking for the files in the wrong places. For example, localhost/css/popup.css is actually located at localhost/app/webroot/css/popup.css. I have my site setup on a remote server with the same exact configurations and it works perfectly fine. I am just having this issue trying to run the site on my laptop at localhost. I edited my VirtualHosts file DocumentRoot and to /home/user/public_html/site.com/public/app/webroot/ and this reduces some errors but I feel that this is wrong and sort of hacking it since I didn't use these setting on my production server which works. The last note I want to make is that the website uses dynamic URLs. I dont know if that has anything to do with it. For example, on the production server the URLS are: site.com/#hello/12321. HERES WHAT I AM WORKING WITH: I have a LAMP server setup on my laptop which runs on Ubuntu 11.10. I have enabled mod_rewrite: sudo a2enmod rewrite Then I edited my Virtual Hosts file: <VirtualHost *:80> ServerName localhost DirectoryIndex index.php DocumentRoot /home/user/public_html/site.com/public <Directory /home/user/public_html/site.com/public/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> Then I restarted apache. My website is using cakePHP. This is the directory structure of the website: "/home/user/public_html/site.com/public" contains: index.php app cake plugins vendors These are my .htaccess files: /home/user/public_html/site.com/public/app/.htaccess: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /home/user/public_html/site.com/public/app/webroot/.htaccess: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php?url=$1 [QSA,L] </IfModule>

  Read the article

• Windows 7 BSOD - ntoskrnl?

  - by Ken Mason

  2 new HP Pavilion notebooks with 7 Home Premium pre-loaded with Norton. My first act was to use the Norton Removal Tool and load ZoneAlarm free and AVG Free. Frequent random BSOD's ever since...I found my way into Debug and have had various reports regarding ntoskrnl, depending on the status of symbols. It's been many years since I played with (DOS 3.x) debug, so this has been a considerable fumble. Excerpts follow and any insights would be greatly appreciated, as I am not a developer: ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. MODULE_NAME: nt FAULTING_MODULE: fffff8000305d000 nt DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt+0x70600 fffff80004d6fd30 000000000000007f : 0000000000000008 0000000080050033 00000000000006f8 fffff80003095e58 : nt+0x6fb69 fffff80004d6fd38 0000000000000008 : 0000000080050033 00000000000006f8 fffff80003095e58 0000000000000000 : 0x7f fffff80004d6fd40 0000000080050033 : 00000000000006f8 fffff80003095e58 0000000000000000 0000000000000000 : 0x8 fffff80004d6fd48 00000000000006f8 : fffff80003095e58 0000000000000000 0000000000000000 0000000000000000 : 0x80050033 fffff80004d6fd50 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : 0x6f8 fffff80004d6fd58 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt+0x38e58 STACK_COMMAND: kb FOLLOWUP_IP: nt+70600 fffff800`030cd600 48894c2408 mov qword ptr [rsp+8],rcx SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt+70600 FOLLOWUP_NAME: MachineOwner IMAGE_NAME: ntoskrnl.exe BUCKET_ID: WRONG_SYMBOLS Followup: MachineOwner ...................................................................... 0: kd !lmi nt Loaded Module Info: [nt] Module: ntkrnlmp Base Address: fffff8000305d000 Image Name: ntkrnlmp.exe Machine Type: 34404 (X64) Time Stamp: 4b88cfeb Sat Feb 27 00:55:23 2010 Size: 5dc000 CheckSum: 545094 Characteristics: 22 perf Debug Data Dirs: Type Size VA Pointer CODEVIEW 25, 19c65c, 19bc5c RSDS - GUID: {7E9A3CAB-6268-45DE-8E10-816E3080A3B7} Age: 2, Pdb: ntkrnlmp.pdb CLSID 4, 19c658, 19bc58 [Data not mapped] Image Type: FILE - Image read successfully from debugger. ntkrnlmp.exe Symbol Type: PDB - Symbols loaded successfully from symbol server. d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb Load Report: public symbols , not source indexed d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb 0: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff80003095e58 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: 2 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffff80004d6fd30 fffff800030cb032 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x69 fffff80004d6fe70 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb2 fffff880089efc60 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!SeAccessCheckFromState+0x58 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b2 fffff800`030cb032 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b2 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 Followup: MachineOwner I tried running Rootkit Revealer but I don't think it works on x64 systems. Similarly Blacklight seems to have aged off. I'm running Sophos Anti-Rootkit now. So far so good...

  Read the article

• Nagios3: Conditional operators for service checks?

  - by Dave

  I'm trying to setup Nagios to monitor my various using hostgroups to define 'machine roles', against which I run services to check the machines by role. However, I'd like to use conditional operators that would enable me to run the service check against an intersection of two host groups, rather than their unions... i.e. using &&, ||, or () operators. For example, imagine I have the following servers: www-eu: Linux WWW (Apache) server, in the EU www-us: Windows WWW (IIS) server, in the US (West coast) ftp-eu: Linux FTP server, in the EU ftp-us: Windows FTP server, in the US I would want to create the following host groups: US-Servers: www-us, ftp-us EU-Servers: www-eu, ftp-eu WWW-Servers: www-us, www-eu FTP-Servers: ftp-us, ftp-eu Now say I'm interested in checking the HTTP response time for my web servers. Then let's say this particular Nagios service is running from the US (West Coast), and that I have a command called *check_http_response_time*. This command will check the responsiveness of the HTTP server, which I can provide an argument which defines the max response time before raising critical. My command might look like: check_http_response_time $HOSTNAME$ 50 Now traditionally, I can run my checks by specifying a list of host or hostgroups. define service{ use local-service hostgroup_name WWW-Servers # Servers = www-us, www-eu servicegroups WWW Checks service_description Check HTTP Response Time check_command check_http_response_time!50 } However, with the above service definition, given my Nagios service is in US West, I could reasonably expect that my EU server will return critical. Really, I want different thresholds for each region (50 for US West, 200 for EU.) I would have to permutate my service for each host and set their custom threshold, or alternatively permutate out my service groups by role & region (i.e. WWW-Servers-EU), and run my specific thresholds against those. Though the latter is better, both are much messier than I'd like... What I would love, and what this post is asking for, is a way to use hostgroups to perform an intersection using conditional logic, rather than a simple union. It might look like: define service{ use local-service hostgroup_name WWW-Servers && US-Servers servicegroups WWW Checks service_description Check HTTP Response Time check_command check_http_response_time!50 } It then would run the check only against servers that are in both WWW-Servers and US-Servers, in my example, just www-us. The benefits of such a feature would be significant for Nagios services configured for large-scale. Is this feature available? If it isn't, will it be available in the future? Is there an alternative way to accomplish this given the most recent Nagios version? Any tips/suggestions are most appreciated! Dave

  Read the article

• MySQL Execution Time Spikes

  - by Brett

  I am having issues with MySQL all of the sudden today. Details: OS: CentOS release 5.7 Server type: Parallels virtuozzo container running on mediatemple DV 4.0 package Average total memory usage: <500mb Total memory usage allowed: 1gb (part of shared pool for emergency only, users are only guaranteed 500mb) Processor: 1ghz Main database sizes with most usage: 275mb & 107mb server stack: nginx 1.0.10, mysql 5.1.54, php 5.3.8 with php-fpm innodb_buffer_pool_size=100M php-fpm max children: 5 Webapps: custom php-based sites, magento & drupal slow query timeout is set to 1 second Steps I completed towards diagnosis: Cannot restart container yet - I will try later tonight when our domestic traffic has dropped Enabled mysql and php-fpm slowlog. Found functions that did DB queries in php-fpm slowlog were taking over 1s to complete at times Found some simple queries in mysql slowlog taking well over 1s to complete that should take less than 1s. Most interesting - execution time seems to spike at times. A query will take .2s a couple times, then one time it will take 8s to run the same query. These results were verified by running raw SQL queries through mysql command line. Top does not reveal anything too interesting Only resource related thing i can see is load averages much higher than normal Up until today, mysql has been fine, there have been no major changes to the db since yesterday. Sometimes things are so bad, I am seeing bad gateway errors after 60s of execution time. Innodb is doing on average 300-1400 reads/sec. Mysql is doing 3-10 queries/sec slow query count in 2 hours uptime is 171 (with slow timeout at 1 second) Tried restarting mysql, nginx, php-fpm multiple times For example: UPDATE `catalogsearch_query` SET `query_text` = 'EW 90', `num_results` = '7532', `popularity` = '99180', `redirect` = NULL, `synonym_for` = NULL, `store_id` = '1', `display_in_terms` = '1', `is_active` = '1', `is_processed` = '1', `updated_at` = '2012-05-08 21:38:31' WHERE (query_id='31'); This query took 17sec to complete one time, rest of the time around .079 sec. But varies, sometimes 1sec, sometimes .004 sec. This is running the same query, over and over with a couple seconds time in between each. Most tables are innodb, and sometimes I noticed the lock time taking 90% of the query execution time, but most of the time lock time is insignificant. Any idea what's going on here?

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• Debian Lenny to Debian Squeeze upgrade problems

  - by Roland Soós

  Hi! Yesterday I made a dist-upgrade on my Debian Lenny server. I thought it will be easy as an usual upgrade, but it's not. I got a lot of problem after the update: # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: linux-image-2.6-amd64 : Depends: linux-image-2.6.32-5-amd64 but it is not installed E: Unmet dependencies. Try using -f. Then I tried the suggestion: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libio-compress-base-perl libatk1.0-0 libts-0.0-0 libmime-types-perl libc-client2007b libgtk2.0-common libxfixes3 libgsf-1-common hicolor-icon-theme libfile-remove-perl libxcomposite1 libltdl3-dev libneon27 libmd5-perl libwmf0.2-7 libilmbase6 libatk1.0-data djvulibre-desktop libdirectfb-1.0-0 fam libxinerama1 libcroco3 libopenexr6 libgsf-1-114 libmail-box-perl libdjvulibre21 openssl-blacklist librsvg2-2 libio-compress-zlib-perl libsysfs2 libbeecrypt6 libxdamage1 libobject-realize-later-perl libuser-identity-perl libgtk2.0-bin libxi6 libxcursor1 portmap libxrandr2 libgtk2.0-0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-image-2.6.32-5-amd64 Suggested packages: linux-doc-2.6.32 The following NEW packages will be installed: linux-image-2.6.32-5-amd64 0 upgraded, 1 newly installed, 0 to remove and 121 not upgraded. 98 not fully installed or removed. Need to get 0 B/28.6 MB of archives. After this operation, 103 MB of additional disk space will be used. Do you want to continue [Y/n]? y perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "hu_HU.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r Preconfiguring packages ... (Reading database ... 37915 files and directories currently installed.) Unpacking linux-image-2.6.32-5-amd64 (from .../linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r dpkg: error processing /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./lib/modules/2.6.32-5-amd64/kernel/sound/pci/hda/snd-hda-codec-realtek.ko': No space left on device configured to not write apport reports dpkg-deb: subprocess paste killed by signal (Broken pipe) locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r Running postrm hook script /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-2.6.26-2-amd64 Updating /boot/grub/menu.lst ... done Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.32-5-amd64 /boot/vmlinuz-2.6.32-5-amd64 Errors were encountered while processing: /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) # dpkg-reconfigure locales perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "hu_HU.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r /usr/sbin/dpkg-reconfigure: locales is broken or not fully installed Then I stucked. Do you have any idea how could I solve this?

  Read the article

• OpenVPN not sending traffic to internet?

  - by coleifer

  I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

  Read the article

• Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

  - by Mike C

  I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

  Read the article

• Odd squid transparent redirect behavior

  - by EMiller

  This is the first time I've set up squid. It's running a redirect script that does some text search/replace on html pages, and then saves them to a location on the same machine on the nginx path - then issues the redirect to that URL (it's an art project :D). The relevant lines in squid.conf are http_port 3128 transparent redirect_program /etc/squid/jefferson_redirect.py The jefferson_redirect.py script is based on this script: http://gofedora.com/how-to-write-custom-redirector-rewritor-plugin-squid-python/ The issue: I'm getting strange http redirect behavior. For example, here is the normal request/response from a PHP script that issues a header("Location:"); - a 302 redirect: http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive HTTP/1.1 302 Found Date: Tue, 13 Apr 2010 05:15:43 GMT Server: Apache X-Powered-By: PHP/5.2.11 Location: http://www.google.com/search?q=yreka Content-Type: text/html Vary: User-Agent,Accept-Encoding Content-Encoding: gzip Content-Length: 2108 Keep-Alive: timeout=3, max=100 Connection: Keep-Alive Here's what it looks like when running through the squid proxy (note that "redirector.mysite.com" is not the site running squid or nginx): http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Proxy-Connection: keep-alive If-Modified-Since: Tue, 13 Apr 2010 05:21:02 GMT HTTP/1.0 200 OK Server: nginx/0.7.62 Date: Tue, 13 Apr 2010 05:21:10 GMT Content-Type: text/html Content-Length: 17865 Last-Modified: Tue, 13 Apr 2010 05:21:10 GMT Accept-Ranges: bytes X-Cache: MISS from jefferson X-Cache-Lookup: HIT from jefferson:3128 Via: 1.1 jefferson:3128 (squid/2.7.STABLE6) Connection: keep-alive Proxy-Connection: keep-alive It is basically working - but the URL http://redirector.mysite.com/?unicmd=g+yreka remains unchanged, while displaying the google page (mostly broken as it's using URLs relative to redirector.mysite.com) I've experienced a similar thing with google results pages: when clicking to another page from google, I get a google URL, with the other site's content. Sorry for the long post - many thanks if you've read this far! Any ideas?

  Read the article

• How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

  - by Zac B

  This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

  Read the article

• Remote installing an msi on citrix servers using WMI

  - by capn

  OK, I'm a C# programmer that is trying to streamline the deployment of a custom windows form app I inherited and built an installer for with WiX (this app will need to be reinstalled regularly as I'm making changes to it). I'm not really used to admin type things (or vbs, or WMI, or terminal servers, or Citrix, and even WiX and MSI are not things I usually deal with) but so far I put together some vbs and have an end goal in mind. The msi does work, and I've installed it from the mapped O: drive on my dev machine and while RDP'd to a citrix machine. End Goal: Deploy code written on my dev machine and compiled into an MSI (that I can improve upon within the confines of WiX and whatever the Windows Installer Engine allows) to the cluster of Citrix machines my users have access to. What am I missing in my script to get the MSI to execute on the remote machines? Layout: Machine A is my dev machine, and has the vbs script and the msi file (XP SP3) Machines C1 - C6 are the Citrix Servers that need the application installed them via the msi (Server 2003 R2 SP2) There is also optionally a shared network resource that all the machines can access. Script: 'Set WMI Constants Const wbemImpersonationLevelImpersonate = 3 Const wbemAuthenticationLevelPktPrivacy = 6 'Set whether this is installing to the debug Citrix Servers Const isDebug = true 'Set MSI location 'Network location yields error 1619 (This installation package could not be opened.) msiLocation = "\\255.255.255.255\odrive\Citrix Deployment\Setup.msi" 'Directory on machine A yields error 3 (file not found) 'msiLocation = "C:\Temp\Deploy\Setup.msi" 'Mapped network drive (on both machines) yield error 3 (file not found) 'msiLocation = "O:\Citrix Deployment\Setup.msi" 'Set login information strDomain = "MyDomain" Wscript.StdOut.Write "user name:" strUser = Wscript.StdIn.ReadLine Set objPassword = CreateObject("ScriptPW.Password") Wscript.StdOut.Write "password:" strPassword = objPassword.GetPassword() 'Names of Citrix Servers Dim citrixServerArray If isDebug Then citrixServerArray = array("C4") Else 'citrixServerArray = array("C1","C2","C3","C5","C6") End If 'Loop through each Citrix Server For Each citrixServer in citrixServerArray 'Login to remote computer Set objLocator = CreateObject("WbemScripting.SWbemLocator") Set objWMIService = objLocator.ConnectServer(citrixServer, _ "root\cimv2", _ strUser, _ strPassword, _ "MS_409", _ "ntlmdomain:" + strDomain) 'Set Remote Impersonation level objWMIService.Security_.ImpersonationLevel = wbemImpersonationLevelImpersonate objWMIService.Security_.AuthenticationLevel = wbemAuthenticationLevelPktPrivacy 'Reference to a process on the machine Dim objProcess : Set objProcess = objWMIService.Get("Win32_Process") 'Change user to install for terminal services errReturn = objProcess.Create _ ("cmd.exe /c change user /install", Null, Null, intProcessID) WScript.Echo errReturn 'Install MSI here 'Reference to a product on the machine Set objSoftware = objWMIService.Get("Win32_Product") 'All users set in option parameter, I'm led to believe that the third parameter is actually ignored 'http://www.webmasterkb.com/Uwe/Forum.aspx/vbscript/2433/Installing-programs-with-VbScript errReturn = objSoftware.Install(msiLocation,"ALLUSERS=2 REBOOT=ReallySuppress",True) Wscript.Echo errReturn 'Change user back to execute errReturn = objProcess.Create _ ("cmd.exe /c change user /execute", Null, Null, intProcessID) WScript.Echo errReturn Next I also tried using this to install, it doesn't return an error code, but doesn't install the msi either, and it makes me wonder if the change user /install command is even really working. errReturn = objProcess.Create _ ("cmd.exe /c msiexec /i ""O:\Citrix Deployment\Setup.msi"" /quiet") Wscript.Echo errReturn

  Read the article

• HAProxy causing delay

  - by user1221444

  I am trying to configure HAProxy to do load balancing for a custom webserver I created. Right now I am noticing an increasing delay with HAProxy as the size of the return message increases. For example, I ran four different tests, here are the results: Response 15kb through HAProxy: Avg. response time: .34 secs Transacation rate: 763 trans/sec Throughput: 11.08 MB/sec Response 2kb through HAProxy: Avg. response time: .08 secs Transaction rate: 1171 trans / sec Throughput: 2.51 MB/sec Response 15kb directly to server: Avg. response time: .11 sec Transaction rate: 1046 trans/sec throughput: 15.20 MB/sec Response 2kb directly to server: Avg. Response time: .05 secs Transaction rate: 1158 trans/sec Throughput: 2.48 MB/sec All transactions are HTTP requests. As you can see, there seems to be a much bigger difference between response times for when the response is bigger, than when it is smaller. I understand there will be a slight delay when using HAProxy. Not sure if it matters, but the test itself was run using siege. And during the test there was only one server behind the HAProxy(the same that was used in the direct to server tests). Here is my haproxy.config file: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 10000 user haproxy group haproxy daemon #debug defaults log global mode http option httplog option dontlognull retries 3 option redispatch option httpclose maxconn 10000 contimeout 10000 clitimeout 50000 srvtimeout 50000 balance roundrobin stats enable stats uri /stats listen lb1 10.1.10.26:80 maxconn 10000 server app1 10.1.10.200:8080 maxconn 5000 I couldn't find much in terms of options in this file that would help my problem. I have heard suggestions that I may have to adjust a few of my sysctl settings. I could not find a lot of information on this however, most documentation is for Linux 2.4 and 2.6 on the sysctl stuff, I am running 3.2(Ubuntu server 12.04), which seems to auto tuning, so I have no clue what I should or shouldn't be changing. Most settings changes I tried had no effect or a negative effect on performance. Just a notice, this is a very preliminary test, and my hope is that at deployment time, my HAProxy will be able to balance 10k-20k requests/sec to many servers, so if anyone could provide information to help me reach that goal, it would be much appreciated. Thank you very much for any information you can provide. And if you need anymore information from me please let me know, I will get you anything I can.

  Read the article

• Aliased network interfaces and isc dhcp server

  - by Jonatan

  I have been banging my head on this for a long time now. There are many discussions on the net about this and similar problems, but none of the solutions seems to work for me. I have a Debian server with two ethernet network interfaces. One of them is connected to internet, while the other is connected to my LAN. The LAN network is 10.11.100.0 (netmask 255.255.255.0). We have some custom hardware that use network 10.4.1.0 (netmask 255.255.255.0) and we can't change that. But we need all hosts on 10.11.100.0 to be able to connect to devices on 10.4.1.0. So I added an alias for the LAN network interface so that the Debian server acts as a gateway between 10.11.100.0 and 10.4.1.0. But then the dhcp server stopped working. The log says: No subnet declaration for eth1:0 (no IPv4 addresses). ** Ignoring requests on eth1:0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** No subnet declaration for eth1:1 (no IPv4 addresses). ** Ignoring requests on eth1:1. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** I had another server before, also running Debian but with the older dhcp3 server, and it worked without any problems. I've tried everything I can think of in dhcpd.conf etc, and I've also compared with the working configuration in the old server. The dhcp server need only handle devices on 10.11.100.0. Any hints? Here's all relevant config files: /etc/default/isc-dhcp-server INTERFACES="eth1" /etc/network/interfaces (I've left out eth0, that connects to the Internet, since there is no problem with that.) auto eth1:0 iface eth1:0 inet static address 10.11.100.202 netmask 255.255.255.0 auto eth1:1 iface eth1:1 inet static address 10.4.1.248 netmask 255.255.255.0 /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name "???.com"; option domain-name-servers ?.?.?.?; default-lease-time 86400; max-lease-time 604800; authorative; subnet 10.11.100.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; pool { range 10.11.100.50 10.11.100.99; } option routers 10.11.100.102; } I have tried to add shared-network etc, but didn't manage to get that to work. I get the same error message no matter what...

  Read the article

< Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >