Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 646/1154 | < Previous Page | 642 643 644 645 646 647 648 649 650 651 652 653  | Next Page >

• Mouse takes a while to start working after boot

  - by warkior

  I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

  Read the article

• Flash doesn't work any more on 10.04

  - by Béné

  I have a very strange problem with flash on my 10.04 system. (An update to 12.04 is not an option, because the system is just too old and slow.) After a recent update flash has just stopped working altogether. Youtube just shows a white square, vimeo a black one. After a 10.04 reinstall the problem stays the same. Not even chrome displays flash content, just a message that shockwave flash could not be loaded. 'ubuntu-restricted-extras' 'flashplugin-nonfree' and 'flashplugin-installer' are all installed in version 11.2.202.238ubuntu0.10.04.1.

  Read the article

• Clonezilla failing as soon as image copying begins

  - by mmr

  I have been trying unsuccessfully to create an image of an Ubuntu 10.04 laptop system. As soon as the copying itself starts, the entire system crashes to a black screen. I suspect that the problem is overheating, and that's why I put an ice pack under the machine. That seems to have helped a bit, but it's still not getting through the copying process. Is there any other possible explanation for dying to a black screen like this? I'm just not relishing the task of removing the hard drive, mounting it elsewhere, and then doing a backup that way.

  Read the article

• Merge home directory after fresh installation with existing (Gentoo) home

  - by jhwist

  I reinstalled my desktop machine with Ubuntu 10.10., coming from Gentoo where I used XFCE. My home is usually NFS-mounted from a server. During the install I let the installer set up my user, but of course my NFS-home wasn't mounted then; I have a regular /home/user now. If I mv /home /home.old and mount my NFS-home to /home instead, I cannot login because Gnome complains about some config-files (sorry, no exact error message as there is no way to copy&paste this). Which of my /home.old/user directories do I have to copy over to my NFS-home so that Gnome is happy again?

  Read the article

• ATI Catalyst doesn't retain changes after reboot when setting extended display

  - by rfc1484

  I have Ubuntu 11.10 and I'm trying to set up extended display for my two displays. I have an AMD 6870. fglrx and fglrx-updates are installed. When I launch amdcccle trough the terminal (using sudo), I select in tab "Multi-Display" the option "Multi-display Desktop with Display(s)". Then it says for changes to be done I have to reboot my computer. Being a good an obedient lad I do just that, but after rebooting the displays are still in the same "clone" option as before in the Catalyst Control Center and no changes are made. Any suggestions?

  Read the article

• Default file manager changed, can't change back

  - by user16171

  (Using ubuntu 11.04) I tried to open a torrent file in chrome, and it asked for my default application, so I clicked Transmission, and then I got an error: "Failed to execute default file manager, Failed to execute child process "transmission" (No such file or directory)." Now if I click on any shortcut on the unity bar, such as the trash folder or the icon for my portable hard drive, I get this error, as well as with any download or folder from chrome or firefox. I can't seem to figure out how to fix this, as there seems to be no easy way to do it.

  Read the article

• Lucid hangs at booting after kernel upgrade

  - by Thomas Deutsch

  This weekend, one of our servers running Lucid has installed some upgrades: libgcrypt11 1.4.4-5ubuntu2.1 linux-firmware 1.34.14 linux-image-2.6.32-41-generic 2.6.32-41.91 linux-libc-dev 2.6.32-41.91 Afterwards, it rebooted since this was a kernel upgrade. Now, it hangs at booting, after /scripts/init-bottom. init-bottom itself should not be the problem, the last line I can see is "done". So the problem has to be shortly after that. http://manpages.ubuntu.com/manpages/hardy/man8/initramfs-tools.8.html tells me, that the next step is procfs and sysfs are moved to the real rootfs and execution is turned over to the init binary which should now be found in the mounted rootfs. But I don't know how and where. The problem exists with older kernels too, and this one here doesn't fix the problem: http://www.tummy.com/journals/entries/jafo_20111003_160440 Anyone an idea?

  Read the article

• home-folder encryption: Does it work?

  - by jpaugh

  Back when Ubuntu first sported home folder encryption (what, around the time of Jaunty Jackalope?), I opted in. That caused me some grief when I decided to change my login password. I found that I couldn't decrypt my home anymore! In trying to fix this, I eventually muddled things to the point that using my old password didn't work anymore, either. That experience has left me very shy of using an encrypted home directory--nevermind the performance hit of encryption. Has this feature become more "stable" since it came out? Does it break if you change your login password? Has your [more recent] experience been better? (Does it work in Natty Narwhal?)

  Read the article

• Could not apply stored configuration for monitors

  - by Hernantz

  Well this happened when I upgraded to Natty. Not only seems I can't change my resolution to higher than 1024x768 but it appears at the left and using only 70% of the monitor's width. I tried logging in but in ubuntu classic mode, and i was able to change it, but that trick did not work anymore. (May this be a compiz problem?) Anyways, here is my /var/log/Xorg.0.log http://pastebin.com/Ew4wwLab and lspci -nn | grep VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) I tried using xrandr for adding manually a resolution of 1280x1768 but without luck. Here is the xrandr output Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) 1280x1024 (0xc6) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz

  Read the article

• Backup, clean install and restore

  - by Tony Martin

  Due to the route I came into Ubuntu I now have 12.10 upgraded from 12.04 on an NTFS file system. I've invested a lot of time getting everything as I want it, vis packages installed and settings, etc. I wonder if there is an easy method of: 1 Backing up the whole system so that I can; 2 Do a squeaky clean install of 12.10 on ext4 with bells and whistles then; 3 Restore my backup so that my system behaves as it did before the reinstall? Sorry if this seems terribly obvious, but I don't want to find all the problems when it's too late. TIA.

  Read the article

• Canon MP495 Scanner not working

  - by Andrew

  Running 12.04, installed and updated latest drivers for MP495 but nothing stil. latest drivers provided here: https://code.launchpad.net/~michael-gruz/+archive/canon-trunk/+packages Followed this guide to the letter: http://ubuntuforums.org/showthread.php?t=1602839&page=11 Xsane and simple scan do not work. I have tried various other programs and have nothing... People are saying it works well with 11.10, so I don't know what the deal is with 12.04. Any help would be greatly appreciated as I need this printer for my out-of-home business, and I really don't want to switch back windows just for a freaking scanner to function. Why don't these companies realise ubuntu users need to print things too?!

  Read the article

• grub recover command line

  - by Rakesh Mohan Hallen

  Recently the service provider link suddenly broke,while I was updating. Then suddenly while I was trying to boot, i could not. The message on my screen was grub recover missing, and I had no option but the grub recover command line. I really did not know what to do. So I installed an earlier version of ubuntu 10.04. It started to boot normally. Now my system is back to 12.04 the version i was working with. How does one handle problems like this?

  Read the article

• Fn keys for Brightness not working on Toshiba Satellite L755

  - by JAMES PARENTE

  I am running Ubuntu 12.04 and I love it! The only problem is the keys for my brightness, F6 and F7, does not work when I am on battery power or AC power. It randomly works after I am idle for a while and log back in. The other weird thing is to see my battery indicator, I need to toggle my touch pad button that is right above the actual pad on and off for it to show up, and then back on so I can use my touch pad, obviously. The only other Fn buttons that work on my laptop is the button to mute (F1) Touch pad on and off (F9) and Fn+3 and Fn+4 for my volume. The only Fn buttons that I care if they work again are my brightness, which again, are F6 and F7. Thanks! James

  Read the article

• How long does boot repair take?

  - by Emre

  Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

  Read the article

• Change resolution in Waking Mars

  - by Wes

  I purchased and installed the humble bundle game "Waking Mars" via the Ubuntu Software Center and it works really well except for some issues with changing settings, namely with the resolution. The in-game settings for changing resolution and entering/exiting fullscreen were easy enough to find and toggle, and when you do it asks to restart the application. When you restart it, all other settings you updated are reflected except for the changes to the resolution. (I'm trying to get it to play in windowed mode that fits onto one monitor, but it will only default to windowed mode with the full dual monitor resolution). I noticed that it writes these values to ~/.local/share/WakingMars/UserSettings.ini. When I change the resolution, it is properly written to in this settings file...but it never is reflected when you restart the application. Any ideas what's wrong?

  Read the article

• LAN visibility and network sharing

  - by takeshin

  I have two Ubuntu machines with wifi network cards configured as DHCP interfaces. machine1: inet addr:192.168.168.105 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 machine2: inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 They are connected to the router: inet addr: 192.168.168.252 Internet connection from the router is accessible on both of the machines. How to share files between those two? I have already tried few ways (eg. samba), but it looks like the machines are not visible to each other: @machine1$: ping 192.168.168.104 From 192.168.168.105 icmp_seq=1 Destination Host Unreachable What do I need to configure? Apparmor? Firewall?

  Read the article

• Compiz effects aren't working properly!

  - by Naveen

  On Ubuntu 12.04, the Compiz visual effects appears to be glitchy. I see a "window flash", after rotating the "Desktop Cube". I've used the "Magic Lamp effect" when minimizing windows, but the window content, minimizes faster, delaying the window border to minimize. "So the border and the window content gets apart, like in the picture below". I've tried updating Compiz, but no luck. How to fix this problem? Will Compiz work properly in XFCE? This didn't happen in Lucid Lynx. I appriciate any help!

  Read the article

• Problem with audio sharing between different programs

  - by Lars Borg

  I've been using Linux for quite some time, but until now I've never run into any problems. I also saw the thread "Sound, stopping between multiple programs", but it is referring to a very old version... My problem is that when I run Diablo 3 (using PlayOnLinux) and Skype 4 at the same time, I only get audio from the program that I start first. If I start skype first and then Diablo 3, I have perfekt audio in Skype and sometimes I might hear a faint whisper of the Diablo sounds... This problem started after I changed motherboard to Asus p8z77-v pro with 16GB memory and Intel i7 3770K CPU. With the old motherboard, all this worked just fine. The OS is Ubuntu 12.04. I have only installed Wine, PlayOnLinux, Skype 4, and Diablo 3. All of the latest version, as far as I know. What should I do? What do you need to know, in order to be able to help? Thanks /Lasse

  Read the article

• Netbeans 7.01 in 12.04 repository, no javascript support

  - by Danielinux

  Hi I've installed Netbeans 7.0.1 from ubuntu 12.04 repository, i'm having many issues, The most important is that I cannot have help in writing javascript. Each .js file appear as a usual text file and even javascript sintax in jsp pages appear as normal text. I've already checked in tools -- options -- misc-- files and i cannot find there the .js association and the text/javascript mime-type. Another issue, really awfull, is that I cannot access CVS server if i do not run Netbeans as a root user. Someone had the same troubles i listed above? Have you some tips for solving them avoiding to install a newer version from Netbeans website? thanks in advance

  Read the article

• Internet Good but update manager not good

  - by Raja

  I am using Ubuntu 12.04 . I am doing Internet with a USB Modem of 236kbps . My issue is , If i am accessing webpage through browser its good but if i am doing sudo apt-get update through terminal , its not responding & its just hanging there .I am unable to get whats my issue . help me to solve this . one more thing , i am unable to change my dns also . raja@badfox:~$ cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 220.226.100.40 nameserver 220.226.6.104 nameserver 127.0.0.1 I wanna replace them to dns ip's linked here http://www.cyberciti.biz/faq/free-dns-server/ see the picture to have some idea about my issue .

  Read the article

• Wubi 12.04 installation error executing command command

  - by Erik Lau

  I have tried to install wubi but have not had luck because there is an error executing command: command=C:\Users\Me\AppData\Local\Temp\pyl4266.tmp\bin\resize2fs.exe-f C:\ubuntu\disks\root.disk 17744M retval=1 stderr= stdout=resize2fs1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Eriks/AppData/Local/Temp/pyl4266.tmp/bin/resize2fs.exe-f C:/unbuntu/disks.root.disk17744M [-d debug_flags][-f][-F][-p] device[new_size] I do not understand what is the problem. Here is my log file. https://skydrive.live.com/redir?resid=B4F19CA027FFAD89!324 Please let me know what can be done to fix this error.

  Read the article

• No sound 12.04 (Dummy output)

  - by Edgar Adrian Alvarez

  Its been weeks with no sound. I feel like Ive tried everything but somethings just dont seem right. I am a new user and so far i love Ubuntu but this sound issue is making me unsure. Im NOT muted. Ive tried multiple jacks, front and back. in alsamixer it says choose sound card and I have only thr 'hda Intel' option. In pulseaudio I only have 'dummy output'. When I have Youtube on I can see audio being detected in pavucontrol but nothing is coming out of the speakers. Im getting desperate, some one please walk me thru this. http://www.alsa-project.org/db/?f=c7377242d96ea884edebd807f4fe71f619b8d6af What more information should i provided?

  Read the article

• No OpenCL devices (13.10 Core I5 4430 Intel Graphics HD)

  - by Itai Bar-Haim

  I've been looking quite a lot for this but couldn't find anything that worked. I have an Intel Core I5-4430 based system with no extra graphics adapter (so it's using the on-board, integrated Intel Graphics HD that is part of the CPU), running Ubuntu 13.10. When running BOINC World Community Grid it says "No usable GPUs". When running a bitcoin mining program it says "No OpenCL devices". I searched the web, found two possible solutions - one was to use the Intel OpenCL driver for Xeon platforms, the other was to use the AMD driver. Tried both. I failed installing the Intel driver as there were too many prerequisites that I just didn't manage to install, and the AMD installation was quite fast to its size (it's 200MB, and took far less than a minute to install), but it didn't solve the problem. Perhaps I'm looking in the wrong direction here, I'm not sure, but is there anyway I can utilize the advance features of my CPU for those distributed computation programs?

  Read the article

• Sarg Daily Report not generated

  - by Suleman

  Ubuntu 12.04 LTS Squid 3 Sarg 2.3.2 following is my crontab configuration # SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin m h dom mon dow user command 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # this does not generate daily html report.

  Read the article

• Insanity joining Server 12.04 to Windows AD

  - by Andrew Stebenne

  I've seen lots of stuff about this error on the internet, but had no luck implementing a solution. I'm trying to use Likewise-Open to join an Ubuntu Server 12.04 machine to a Windows Active Dicrectory domain controller and having absolutely no luck. I run: sudo domainjoin-cli join my.domain.gob ADMINISTRATOR and get back (after putting in the admin password): Error: DNS_ERROR_BAD_PACKET [code 0x0000251e] A bad packet was recieved from a DNS server. Potentially the requested address does not exist. I have heard that WAD insists on being your only nameserver, and in attempts to make that work, I've tried editing /etc/resolv.conf and /etc/network/interfaces but none of that has worked either. Ideas?

  Read the article

< Previous Page | 642 643 644 645 646 647 648 649 650 651 652 653  | Next Page >