Search Results

Search found 17972 results on 719 pages for 'always on'.

Page 647/719 | < Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >

  • Having a hard time having consecutive animations for an attack

    - by Kelby Styler
    So I've been trying to figure this out for about 8 hours now...It's driving me nuts because I am pretty sure that it is something dead simple that I am just not understanding. I had everything working fine when I was just cycling through the animation: Idle - Attack - Attack 1 - Attack 2. Just in an infinite loop. The problem now is that I want it to go Attack - check if x time passes if ctrl pressed before x passes move to Attack 1, if not move back to Idle - Then either Attack 1 or Idle depending on how long has passed. I've almost gotten it a few time, but something always happens where it falls apart if I press ctrl too fast or after multiple cycles of the animation. Any help would be appreciated, I'm just at my wits end on this one. I've been looking at this so long that I just don't know where to go anymore. Code is below, here is the controller using UnityEngine; using System.Collections; public class MeleeAttack : MonoBehaviour { public int damage; public bool Attack; public bool Attack1; public bool Attack2; public bool Idle; private Animator animator; private int attnum = 0; private float count = 2f; private float timeLeft; //Gives value to damage output void MAttackDmg () { if (Input.GetKeyDown (KeyCode.RightControl) || Input.GetKeyDown (KeyCode.LeftControl)) { switch (attnum) { case (0): Attack = true; damage = 2; animator.SetBool ("Attack", Attack); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (1): Attack1 = true; damage = 2; animator.SetBool ("Attack1", Attack1); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (2): Attack2 = true; damage = 2; animator.SetBool ("Attack2", Attack2); attnum = 0; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; } } if (Input.GetKeyUp (KeyCode.RightControl) || Input.GetKeyUp (KeyCode.LeftControl)) { switch (attnum) { case (0): Debug.Log ("false"); damage = 0; if (timeLeft <= 0f) { Attack2 = false; animator.SetBool ("Attack2", Attack2); Debug.Log ("t1"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (1): Debug.Log ("false1"); damage = 0; if (timeLeft <= 0f) { Debug.Log ("t2"); Attack = false; animator.SetBool ("Attack", Attack); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (2): Debug.Log ("false2"); damage = 0; if (timeLeft <= 0f) { Attack1 = false; animator.SetBool ("Attack1", Attack1); Debug.Log ("t3"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; } } } // Use this for initialization void Awake () { animator = GetComponent<Animator> (); } // Update is called once per frame void Update () { timeLeft -= Time.deltaTime;; MAttackDmg (); } void Start (){ timeLeft = count; } }

    Read the article

  • How to Answer a Stupid Interview Question the Right Way

    - by AjarnMark
    Have you ever been asked a stupid question during an interview; one that seemed to have no relation to the job responsibilities at all?  Tech people are often caught off-guard by these apparently irrelevant questions, but there is a way you can turn these to your favor.  Here is one idea. While chatting with a couple of folks between sessions at SQLSaturday 43 last weekend, one of them expressed frustration over a seemingly ridiculous and trivial question that she was asked during an interview, and she believes it cost her the job opportunity.  The question, as I remember it being described was, “What is the largest byte measurement?”.  The candidate made up a guess (“zetabyte”) during the interview, which is actually closer than she may have realized.  According to Wikipedia, there is a measurement known as zettabyte which is 10^21, and the largest one listed there is yottabyte at 10^24. My first reaction to this question was, “That’s just a hiring manager that doesn’t really know what they’re looking for in a candidate.  Furthermore, this tells me that this manager really does not understand how to build a team.”  In most companies, team interaction is more important than uber-knowledge.  I didn’t ask, but this could also be another geek on the team trying to establish their Alpha-Geek stature.  I suppose that there are a few, very few, companies that can build their businesses on hiring only the extreme alpha-geeks, but that certainly does not represent the majority of businesses in America. My friend who was there suggested that the appropriate response to this silly question would be, “And how does this apply to the work I will be doing?” Of course this is an understandable response when you’re frustrated because you know you can handle the technical aspects of the job, and it seems like the interviewer is just being silly.  But it is also a direct challenge, which may not be the best approach in interviewing.  I do have to admit, though, that there are those folks who just won’t respect you until you do challenge them, but again, I don’t think that is the majority. So after some thought, here is my suggestion: “Well, I know that there are petabytes and exabytes and things even larger than that, but I haven’t been keeping up on my list of Greek prefixes that have not yet been used, so I would have to look up the exact answer if you need it.  However, I have worked with databases as large as 30 Terabytes.  How big are the largest databases here at X Corporation?”  Perhaps with a follow-up of, “Typically, what I have seen in companies that have databases of your size, is that the three biggest challenges they face are: A, B, and C.  What would you say are the top 3 concerns that you would like the person you hire to be able to address?…Here is how I have dealt with those concerns in the past (or ‘Here is how I would tackle those issues for you…’).” Wait! What just happened?!  We took a seemingly irrelevant and frustrating question and turned it around into an opportunity to highlight our relevant skills and guide the conversation back in a direction more to our liking and benefit.  In more generic terms, here is what we did: Admit that you don’t know the specific answer off the top of your head, but can get it if it’s truly important to the company. Maybe for some reason it really is important to them. Mention something similar or related that you do know, reassuring them that you do have some knowledge in that subject area. Draw a parallel to your past work experience. Ask follow-up questions about the company’s specific needs and discuss how you can fulfill those. This type of thing requires practice and some forethought.  I didn’t come up with this answer until a day later, which is too late when you’re interviewing.  I still think it is silly for an interviewer to ask something like that, but at least this is one way to spin it to your advantage while you consider whether you really want to work for someone who would ask a thing like that.  Remember, interviewing is a two-way process.  You’re deciding whether you want to work there just as much as they are deciding whether they want you. There is always the possibility that this was a calculated maneuver on the part of the hiring manager just to see how quickly you think on your feet and how you handle stupid questions.  Maybe he knows something about the work environment and he’s trying to gauge whether you’ll actually fit in okay.  And if that’s the case, then the above response still works quite well.

    Read the article

  • Working with Reporting Services Filters–Part 1

    - by smisner
    There are two ways that you can filter data in Reporting Services. The first way, which usually provides a faster performance, is to use query parameters to apply a filter using the WHERE clause in a SQL statement. In that case, the structure of the filter depends upon the syntax recognized by the source database. Another way to filter data in Reporting Services is to apply a filter to a dataset, data region, or a group. Using this latter method, you can even apply multiple filters. However, the use of filter operators or the setup of multiple filters is not always obvious, so in this series of posts, I'll provide some more information about the configuration of filters. First, why not use query parameters exclusively for filtering? Here are a few reasons: You might want to apply a filter to part of the report, but not all of the report. Your dataset might retrieve data from a stored procedure, and doesn't allow you to pass a query parameter for filtering purposes. Your report might be set up as a snapshot on the report server and, in that case, cannot be dynamically filtered based on a query parameter. Next, let's look at how to set up a report filter in general. The process is the same whether you are applying the filter to a dataset, data region, or a group. When you go to the Filters page in the Properties dialog box for whichever of these items you selected (dataset, data region, group), you click the Add button to create a new filter. The interface looks like this: The Expression field is usually a field in the dataset, so to make it easier for you to make a selection,the drop-down list displays all of the current dataset fields. But notice the expression button to the right, which means that you can set up any type of expression-not just a dataset field. To the right of the expression button, you'll find a data type drop-down list. It's important to specify the correct data type for the field or expression you're using. Now for the operators. Here's a list of the options that you have: This Operator Performs This Action =, <>, >, >=, <, <=, Like Compares expression to value Top N, Bottom N Compares expression to Top (Bottom) set of N values (N = integer) Top %, Bottom % Compares expression to Top (Bottom) N percent of values (N = integer or float) Between Determines whether expression is between two values, inclusive In Determines whether expression is found in list of values Last, the Value is what you're comparing to the expression using the operator. The construction of a filter using some operators (=, <>, >, etc.) is fairly simple. If my dataset (for AdventureWorks data) has a Category field, and I have a parameter that prompts the user for a single category, I can set up a filter like this: Expression Data Type Operator Value [Category] Text = [@Category] But if I set the parameter to accept multiple values, I need to change the operator from = to In, just as I would have to do if I were using a query parameter. The parameter expression, [@Category], which translates to =Parameters!Category.Value, doesn’t need to change because it represents an array as soon as I change the parameter to allow multiple values. The “In” operator requires an array. With that in mind, let’s consider a variation on Value. Let’s say that I have a parameter that prompts the user for a particular year – and for simplicity’s sake, this parameter only allows a single value, and I have an expression that evaluates the previous year based on the user’s selection. Then I want to use these two values in two separate filters with an OR condition. That is, I want to filter either by the year selected OR by the year that was computed. If I create two filters, one for each year (as shown below), then the report will only display results if BOTH filter conditions are met – which would never be true. Expression Data Type Operator Value [CalendarYear] Integer = [@Year] [CalendarYear] Integer = =Parameters!Year.Value-1 To handle this scenario, we need to create a single filter that uses the “In” operator, and then set up the Value expression as an array. To create an array, we use the Split function after creating a string that concatenates the two values (highlighted in yellow) as shown below. Expression Data Type Operator Value =Cstr(Fields!CalendarYear.Value) Text In =Split( CStr(Parameters!Year.Value) + ”,” + CStr(Parameters!Year.Value-1) , “,”) Note that in this case, I had to apply a string conversion on the year integer so that I could concatenate the parameter selection with the calculated year. Pay attention to the second argument of the Split function—you must use a comma delimiter for the result to work correctly with the In operator. I also had to change the Expression value from [CalendarYear] (or =Fields!CalendarYear.Value) so that the expression would return a string that I could compare with the values in the string array. More fun with filter expressions in future posts!

    Read the article

  • Windows Workflow Foundation (WF) and things I wish were more intuitive

    - by pjohnson
    I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Workflow Activity Library project type - What's the point of this separate project type? So far I don't see much advantage to keeping your custom activities in a separate project. I prefer to have as few projects as needed (and no fewer). The Designer's Toolbox window seems to find your custom activities just fine no matter where they are, and the debugging experience doesn't seem to be any different. Designer Properties - This is about the designer, and not specific to WF, but nevertheless something that's hindered me a lot more in WF than in Windows Forms or elsewhere. The Properties window does a good job of showing you property values when you hover the mouse over the values. But they don't do the same to find out what a control's type is. So maybe if I named all my activities "x1" and "x2" instead of helpful self-documenting names like "listenForStatusUpdate", then I could easily see enough of the type to determine what it is, but any names longer than those and all I get of the type is "System.Workflow.Act" or "System.Workflow.Compone". Even hitting the dropdown doesn't expand any wider, like the debugger quick watch "smart tag" popups do when you scroll through members. The only way I've found around this in VS 2008 is to widen the Properties dialog, losing precious designer real estate, then shrink it back down when you're done to see what you were doing. Really? WF Designer - This is about the designer, and I believe is specific to WF. I should be able to edit the XML in a .xoml file, or drag and drop using the designer. With WPF (at least in VS 2010 Ultimate), these are side by side, and changes to one instantly update the other. With WF, I have to right-click on the .xoml file, choose Open With, and pick XML Editor to edit the text. It looks like this is one way where WF didn't get the same attention WPF got during .NET Fx 3.0 development. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

    Read the article

  • Sea Monkey Sales & Marketing, and what does that have to do with ERP?

    - by user709270
    Tier One Defined By Lyle Ekdahl, Oracle JD Edwards Group Vice President and General Manager  I recently became aware of the latest Sea Monkey Sales & Marketing tactic. Wait now, what is Sea Monkey Sales & Marketing and what does that have to do with ERP? Well if you grew up in USA during the 50’s, 60’s and maybe a bit in the early 70’s there was a unifying media of culture known as the comic book. I was a big Iron Man fan. I always liked the troubled hero aspect of Tony Start and hey he was a technologist. This is going somewhere, just hold on. Of course comic books like most media contained advertisements. Ninety pound weakling transformed by Charles Atlas in just 15 minutes per day. Baby Ruth, Juicy Fruit Gum and all assortments of Hostess goodies were on display. The best ad was for the “Amazing Live Sea-Monkeys – The real live fun-pets you grow yourself!” These ads set the standard for exaggeration and half-truth; “…they love attention…so eager to please, they can even be trained…” The cartoon picture on the ad is of a family of royal looking sea creatures – daddy, mommy, son and little sis – sea monkey? There was a disclaimer at the bottom in fine print, “Caricatures shown not intended to depict Artemia.” Ok what ten years old knows what the heck artemia is? Well you grow up fast once you’ve been separated from your buck twenty five plus postage just to discover that it is brine shrimp. Really dumb brine shrimp that don’t take commands or do tricks. Unfortunately the technology industry is full of sea monkey sales and marketing. Yes believe it or not in some cases there is subterfuge and obfuscation used to secure contracts. Hey I get it; the picture on the box might not be the actual size. Make up what you want about your product, but here is what I don’t like, could you leave out the obvious falsity when it comes to my product, especially the negative stuff. So here is the latest one – “Oracle’s JD Edwards is NOT tier one”. Really? Definition please! Well a whole host of googleable and reputable sources confirm that a tier one vendor is large, well known, and enjoys national and international recognition. Let me see large, so thousands of customers? Oh and part of the world’s largest business software and hardware corporation? Check and check JD Edwards has that and that. Well known, enjoying national and international recognition? Oracle’s JD Edwards EnterpriseOne is available in 21 languages and is directly localized in 33 countries that support some of the world’s largest multinationals and many midsized domestic market companies. Something on the order of half the JD Edwards customer base is outside North America. My passport is on its third insert after 2 years and not from vacations. So if you don’t mind I am going to mark national and international recognition in the got it column. So what else is there? Well let me offer a few criteria. Longevity – The JD Edwards products benefit from 35+ years of intellectual property development; through booms, busts, mergers and acquisitions, we are still here Vision & innovation – JD Edwards is the first full suite ERP to run on the iPad as just one example Proven track record of execution – Since becoming part of Oracle, JD Edwards has released to the market over 20 deliverables including major release, point releases, new apps modules, tool releases, integrations…. Solid, focused functionality with a flexible, interoperable, extensible underlying architecture – JD Edwards offers solid core ERP with specialty modules for verticals all delivered on a well defined independent tools layer that helps enable you to scale your business without an ERP reimplementation A continuation plan – Oracle’s JD Edwards offers our customers a 6 year roadmap as well as interoperability with Oracle’s next generation of applications Oh I almost forgot that the expert sources agree on one additional thing, tier one may be a preferred vendor that offers product and services to you with appealing value. You should check out the TCO studies of JD Edwards. I think you will see what the thousands of customers that rely on these products to run their businesses enjoy – that is the tier one solution with the lowest TCO. Oh and if you get an offer to buy an ERP for no license charge, remember the picture on the box might not be the actual size. 

    Read the article

  • Surface and the Uphill Battle to Win Over iPad Users (Namely: Me)

    - by D'Arcy Lussier
    I went away this past weekend and decided to bring along the Windows 8 tablet from the Build conference last year – y’know, to give Windows 8 a try in a typical scenario. I also brought our iPad 2 along since I figured my wife would want to use that. I’d love to tell you how I found using my Windows 8 tablet but I can’t – I used the iPad exclusively the entire weekend. It was during this that I realized what Microsoft needs to do to win me over as an iPad user. As you’ll see, I’m left wondering what it is that Surface is meant to compete with: iPad and other tablets, or thin laptops like the MacBook Air or Ultrabooks. Device Size I really like the size of the iPad compared with the Build tablet. It’s not as long and the thinness/weight of the device makes it feel more like you’re holding a magazine than a computer. I’m pleased that Microsoft will be matching the thinness of the iPad with Surface, but I’m suspect as to what that actually means. The iPad’s edges slant inwards where the Surface has a thicker boxish look (similar to the iPhone 4S). So while they may have the same depth at the deepest part of both devices, I bet the iPad will come off feeling thinner. However, its not lost on me the number of external port options the Surface’s design provides over the iPad (Usb, etc.). With that said, I haven’t missed having a USB slot on my iPad. I’m not a fan of lengthening the Surface screen size to almost a full inch over the iPad, mainly because… Vertical Orientation Experience Did you notice at the announce event, in the images of the devices that have been released, and in any marketing for it, that the surface is always displayed in horizontal orientation. This is a huge beef I have with my Build tablet and why I prefer the iPad. Yes the iPad can do the wide-screenish mode, but the iPad is oriented to be vertical by nature. Don’t agree? Look at the button and camera placement – both on the shorter sides of the device. Compare that with the Surface, where the orientation for the button and camera is on the longer sides. To be fair, Blackberry and the horde of Android tablets out there haven’t gotten this either – since most monitors are widescreen nowadays tablets should be too right? Wrong. Widescreen is great for certain things, but tasks such as reading is not one of them – hence why monitor companies like Dell provide stands that allow you to flip your widescreen monitor to a vertical orientation. That Microsoft has chosen a horizontal orientation by default for Windows 8 is disappointing – hopefully hardware manufacturers will be given the option of a default vertical orientation. Fast Startup Time I like that I can turn off/turn on the iPad very quickly. Even from a true “off” mode and not just sleeping, the iPad boots up very quickly. Windows RT needs to have that same quick response. If I start finding that I’m waiting for the device to boot up for more than 30 seconds that could be a show stopper. No Heat I really hate that the Build tablet has fans that kick in to cool the procs, but its basically a slate computer and I get its part of that prototype build. For Surface, it needs to be the same type of experience as the iPad – no heat! I know Surface doesn’t have fans and uses some cool new vent system or something like that, but even then – I want to sit and read a book on my Surface without having to feel any heat coming from the device, which is the experience I have with the iPad now. What About Apps?! I am definitely not the target client when it comes to app stores. On my iPad I use: Safari Kindle Reader Twitter App Settlers of Catan TSN’s App And that’s it. So really, while its nice that some version of Office might be available, I’m not planning on utilizing a Surface for creating a PowerPoint or working on a Word document – that’s what my laptop is for. I want my tablet to be for information snacking or as an e-reader and occasionally an entertainment device. Surface vs iPad or Surface vs Air? The more that I read up on Surface, the more I wonder if it won’t be a touch-enabled MacBook Air competitor more than an iPad one. Also, I really question if Microsoft gets tablets – when one of your main selling features is a built-in physical keyboard it speaks more to a traditional laptop experience than a tablet one that’s entirely reliant on touch. Still, I really love the Windows Phone interface – way more than iOS – so I’m still very optimistic that the Metro experience on the tablet will be fantastic. I just worry that Microsoft has interpreted a tablet as a computer with a removable keyboard and a touch screen, and that’s not what tablet computing is about at all.

    Read the article

  • SQLAuthority News – 7th Anniversary of Blog – A Personal Note

    - by Pinal Dave
    Special Day Today is a very special day – seven years ago I blogged for the very first time.  Seven years ago, I didn’t know what I was doing, I didn’t know how to blog, or even what a blog was or what to write.  I was working as a DBA, and I was trying to solve a problem – at my job, there were a few issues I had to fix again and again and again.  There were days when I was rewriting the same solution over and over, and there were times when I would get very frustrated because I could not write the same elegant solution that I had written before.  I came up with a solution to this problem – posting these solutions online, where I could access them whenever I needed them.  At that point, I had no idea what a blog was, or even how the internet worked, I had no idea that a blog would be visible to others.  Can you believe it? Google it on Yahoo! After a few posts on this “blog,” there was a surprise for me – an e-mail saying that someone had left me a comment.  I was surprised, because I didn’t even know you could comment on a blog!  I logged on and read my comment.  It said: “I like your script,but there is a small bug.  If you could fix it, it will run on multiple other versions of SQL Server.”  I was like, “wow, someone figured out how to find my blog, and they figured out how to fix my script!”  I found the bug, I fixed the script, and a wrote a thank you note to the guy.  My first question for him was: how did you figure it out – not the script, but how to find my blog?  He said he found it from Yahoo Search (this was in the time before Google, believe it or not). From that day, my life changed.  I wrote a few more posts, I got a few more comments, and I started to watch my traffic.  People were reading, commenting, and giving feedback.  At the end of the day, people enjoyed what I was writing.  This was a fantastic feeling!  I never thought I would be writing for others.  Even today, I don’t feel like I am writing for others, but that I am simply posting what I am learning every day.  From that very first day, I decided that I would not change my intent or my blog’s purpose. 72 Million Views – 2600 Posts – 57000 comments – 10 books – 9 courses Today, this blog is my habit, my addiction, my baby.  Every day I try to learn something new, and that lesson gets posted on the blog.  Lately there have been days where I am traveling for a full 24 hours, but even on those days I try to learn something new, and later when I have free time, I will still post it to the blog.  Because of this habit, this blog has over 72 millions views, I have written more than 2600 posts, and there are 57,000 comments and counting.  I have also written 10 books, 9 courses, and learned so many things.  This blog has given me back so much more than I ever put it into it.  It gave me an education, a reason to learn something new every day, and a way to connect to people.  I like to think of it as a learning chain, a relay where we all pass knowledge from one to another. Never Ending Journey When I started the blog, I thought I would write for a few days and stop, but now after seven years I haven’t stopped and I have no intention of stopping!  However, change happens, and for this blog it will start today.  This blog started as a single resource for SQL Server, but now it has grown beyond, to Sharepoint, Personal Development, Developer Training, MySQL, Big Data, and lots of other things.  Truly speaking, this blog is more than just SQL Server, and that was always my intention.  I named it “SQL Authority,” not “SQL Server Authority”!  Loudly and clearly, I would like to announce that I am going to go back to my roots and start writing more about SQL, more about big data, and more about the other technology like relational databases, MySQL, Oracle, and others.  My goal is not to become a comprehensive resource for every technology, my goal is to learn something new every day – and now it can be so much more than just SQL Server.  I will learn it, and post it here for you. I have written a very long post on this anniversary, but here is the summary: Thank You.  You all have been wonderful.  Seven years is a long journey, and it makes me emotional.  I have been “with” this blog before I met my wife, before we had our daughter.  This blog is like a fourth member of the family.  Keep reading, keep commenting, keep supporting.  Thank you all. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: About Me, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • Man pages not finding entry

    - by Mike
    So, I'm not sure what is going on with my system (ubuntu 12.04), but my man pages do not seem to be working. I try man gcc and get the following response No manual entry for gcc See 'man 7 undocumented' for help when manual pages are not available. However I see the man entry in /usr/share/man/man1/gcc.1.gz Here is what my /etc/manpath.config file looks like # manpath.config # # This file is used by the man-db package to configure the man and cat paths. # It is also used to provide a manpath for those without one by examining # their PATH environment variable. For details see the manpath(5) man page. # # Lines beginning with `#' are comments and are ignored. Any combination of # tabs or spaces may be used as `whitespace' separators. # # There are three mappings allowed in this file: # -------------------------------------------------------- # MANDATORY_MANPATH manpath_element # MANPATH_MAP path_element manpath_element # MANDB_MAP global_manpath [relative_catpath] #--------------------------------------------------------- # every automatically generated MANPATH includes these fields # #MANDATORY_MANPATH /usr/src/pvm3/man # MANDATORY_MANPATH /usr/man MANDATORY_MANPATH /usr/share/man MANDATORY_MANPATH /usr/local/share/man #--------------------------------------------------------- # set up PATH to MANPATH mapping # ie. what man tree holds man pages for what binary directory. # # *PATH* -> *MANPATH* # MANPATH_MAP /bin /usr/share/man MANPATH_MAP /usr/bin /usr/share/man MANPATH_MAP /sbin /usr/share/man MANPATH_MAP /usr/sbin /usr/share/man MANPATH_MAP /usr/local/bin /usr/local/man MANPATH_MAP /usr/local/bin /usr/local/share/man MANPATH_MAP /usr/local/sbin /usr/local/man MANPATH_MAP /usr/local/sbin /usr/local/share/man MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man MANPATH_MAP /usr/bin/X11 /usr/X11R6/man MANPATH_MAP /usr/games /usr/share/man MANPATH_MAP /opt/bin /opt/man MANPATH_MAP /opt/sbin /opt/man #--------------------------------------------------------- # For a manpath element to be treated as a system manpath (as most of those # above should normally be), it must be mentioned below. Each line may have # an optional extra string indicating the catpath associated with the # manpath. If no catpath string is used, the catpath will default to the # given manpath. # # You *must* provide all system manpaths, including manpaths for alternate # operating systems, locale specific manpaths, and combinations of both, if # they exist, otherwise the permissions of the user running man/mandb will # be used to manipulate the manual pages. Also, mandb will not initialise # the database cache for any manpaths not mentioned below unless explicitly # requested to do so. # # In a per-user configuration file, this directive only controls the # location of catpaths and the creation of database caches; it has no effect # on privileges. # # Any manpaths that are subdirectories of other manpaths must be mentioned # *before* the containing manpath. E.g. /usr/man/preformat must be listed # before /usr/man. # # *MANPATH* -> *CATPATH* # MANDB_MAP /usr/man /var/cache/man/fsstnd MANDB_MAP /usr/share/man /var/cache/man MANDB_MAP /usr/local/man /var/cache/man/oldlocal MANDB_MAP /usr/local/share/man /var/cache/man/local MANDB_MAP /usr/X11R6/man /var/cache/man/X11R6 MANDB_MAP /opt/man /var/cache/man/opt # #--------------------------------------------------------- # Program definitions. These are commented out by default as the value # of the definition is already the default. To change: uncomment a # definition and modify it. # #DEFINE pager pager -s #DEFINE cat cat #DEFINE tr tr '\255\267\264\327' '\055\157\047\170' #DEFINE grep grep #DEFINE troff groff -mandoc #DEFINE nroff nroff -mandoc #DEFINE eqn eqn #DEFINE neqn neqn #DEFINE tbl tbl #DEFINE col col #DEFINE vgrind vgrind #DEFINE refer refer #DEFINE grap grap #DEFINE pic pic -S # #DEFINE compressor gzip -c7 #--------------------------------------------------------- # Misc definitions: same as program definitions above. # #DEFINE whatis_grep_flags -i #DEFINE apropos_grep_flags -iEw #DEFINE apropos_regex_grep_flags -iE #--------------------------------------------------------- # Section names. Manual sections will be searched in the order listed here; # the default is 1, n, l, 8, 3, 0, 2, 5, 4, 9, 6, 7. Multiple SECTION # directives may be given for clarity, and will be concatenated together in # the expected way. # If a particular extension is not in this list (say, 1mh), it will be # displayed with the rest of the section it belongs to. The effect of this # is that you only need to explicitly list extensions if you want to force a # particular order. Sections with extensions should usually be adjacent to # their main section (e.g. "1 1mh 8 ..."). # SECTION 1 n l 8 3 2 3posix 3pm 3perl 5 4 9 6 7 # #--------------------------------------------------------- # Range of terminal widths permitted when displaying cat pages. If the # terminal falls outside this range, cat pages will not be created (if # missing) or displayed. # #MINCATWIDTH 80 #MAXCATWIDTH 80 # # If CATWIDTH is set to a non-zero number, cat pages will always be # formatted for a terminal of the given width, regardless of the width of # the terminal actually being used. This should generally be within the # range set by MINCATWIDTH and MAXCATWIDTH. # #CATWIDTH 0 # #--------------------------------------------------------- # Flags. # NOCACHE keeps man from creating cat pages. #NOCACHE Thanks for any help (p.s. even 'man man' fails) Edit: When I run ls -l /usr/share/man/man1/gcc* I get the following output lrwxrwxrwx 1 root root 12 May 27 15:41 /usr/share/man/man1/gcc.1.gz -> gcc-4.6.1.gz -rw-r--r-- 1 root root 217776 Apr 15 17:34 /usr/share/man/man1/gcc-4.6.1.gz

    Read the article

  • Subterranean IL: Constructor constraints

    - by Simon Cooper
    The constructor generic constraint is a slightly wierd one. The ECMA specification simply states that it: constrains [the type] to being a concrete reference type (i.e., not abstract) that has a public constructor taking no arguments (the default constructor), or to being a value type. There seems to be no reference within the spec to how you actually create an instance of a generic type with such a constraint. In non-generic methods, the normal way of creating an instance of a class is quite different to initializing an instance of a value type. For a reference type, you use newobj: newobj instance void IncrementableClass::.ctor() and for value types, you need to use initobj: .locals init ( valuetype IncrementableStruct s1 ) ldloca 0 initobj IncrementableStruct But, for a generic method, we need a consistent method that would work equally well for reference or value types. Activator.CreateInstance<T> To solve this problem the CLR designers could have chosen to create something similar to the constrained. prefix; if T is a value type, call initobj, and if it is a reference type, call newobj instance void !!0::.ctor(). However, this solution is much more heavyweight than constrained callvirt. The newobj call is encoded in the assembly using a simple reference to a row in a metadata table. This encoding is no longer valid for a call to !!0::.ctor(), as different constructor methods occupy different rows in the metadata tables. Furthermore, constructors aren't virtual, so we would have to somehow do a dynamic lookup to the correct method at runtime without using a MethodTable, something which is completely new to the CLR. Trying to do this in IL results in the following verification error: newobj instance void !!0::.ctor() [IL]: Error: Unable to resolve token. This is where Activator.CreateInstance<T> comes in. We can call this method to return us a new T, and make the whole issue Somebody Else's Problem. CreateInstance does all the dynamic method lookup for us, and returns us a new instance of the correct reference or value type (strangely enough, Activator.CreateInstance<T> does not itself have a .ctor constraint on its generic parameter): .method private static !!0 CreateInstance<.ctor T>() { call !!0 [mscorlib]System.Activator::CreateInstance<!!0>() ret } Going further: compiler enhancements Although this method works perfectly well for solving the problem, the C# compiler goes one step further. If you decompile the C# version of the CreateInstance method above: private static T CreateInstance() where T : new() { return new T(); } what you actually get is this (edited slightly for space & clarity): .method private static !!T CreateInstance<.ctor T>() { .locals init ( [0] !!T CS$0$0000, [1] !!T CS$0$0001 ) DetectValueType: ldloca.s 0 initobj !!T ldloc.0 box !!T brfalse.s CreateInstance CreateValueType: ldloca.s 1 initobj !!T ldloc.1 ret CreateInstance: call !!0 [mscorlib]System.Activator::CreateInstance<T>() ret } What on earth is going on here? Looking closer, it's actually quite a clever performance optimization around value types. So, lets dissect this code to see what it does. The CreateValueType and CreateInstance sections should be fairly self-explanatory; using initobj for value types, and Activator.CreateInstance for reference types. How does the DetectValueType section work? First, the stack transition for value types: ldloca.s 0 // &[!!T(uninitialized)] initobj !!T // ldloc.0 // !!T box !!T // O[!!T] brfalse.s // branch not taken When the brfalse.s is hit, the top stack entry is a non-null reference to a boxed !!T, so execution continues to to the CreateValueType section. What about when !!T is a reference type? Remember, the 'default' value of an object reference (type O) is zero, or null. ldloca.s 0 // &[!!T(null)] initobj !!T // ldloc.0 // null box !!T // null brfalse.s // branch taken Because box on a reference type is a no-op, the top of the stack at the brfalse.s is null, and so the branch to CreateInstance is taken. For reference types, Activator.CreateInstance is called which does the full dynamic lookup using reflection. For value types, a simple initobj is called, which is far faster, and also eliminates the unboxing that Activator.CreateInstance has to perform for value types. However, this is strictly a performance optimization; Activator.CreateInstance<T> works for value types as well as reference types. Next... That concludes the initial premise of the Subterranean IL series; to cover the details of generic methods and generic code in IL. I've got a few other ideas about where to go next; however, if anyone has any itching questions, suggestions, or things you've always wondered about IL, do let me know.

    Read the article

  • MySQL for Excel 1.1.0 GA has been released

    - by Javier Treviño
    The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.0 GA, one of our newest products contained in the MySQL Installer suite. You can download it from our official Downloads page at http://dev.mysql.com/downloads/installer/. The 1.1.0 release of MySQL for Excel introduces the following features: Edit MySQL Data. Edit MySQL Data This may be the coolest feature so far; users will be able to edit the data in a MySQL table using MS Excel in a very friendly and intuitive way.  Edit Data supports inserting new rows, deleting existing rows and updating existing data as easy as playing with data in an Excel’s spreadsheet and pushing changes back to the server.  Also this version contains the following bug fixes: Enabled the following checkboxes in the Append Data's Advanced Options dialog and added code in the Append Data dialog to use the checkboxes as follows: Automatically store the column mapping for the given table     If checked the current mapping will be stored automatically after clicking the Append button if the append operation is successful and there is no mapping for the current connection.schema.table already; the new mapping is stored with a proposed name of Mapping. Reload stored column mapping for the selected table automatically     If checked the first Stored Mapping found where all column names in the source grid match all column names in the target grid is automatically selected and applied when the Append Data dialog is loaded. Fixed code in Append Data that applies a stored column mapping to skip target columns where the associated mapping is empty (saved as a -1). Enclosed the Add-In's startup code in a try-catch block in order to log any possible error thrown during startup; and added information messages to the log at the beginning of the Add-In's startup code and at the end of the shutdown code.  Also changed the wrapper method that calls the MySQLUtility to write messages to the log to make logging easier, thus changed the log call throughout all the code that contains a try-catch block. Added code to the main wix configuration file to check if a newer version is already installed and if so abort the installation Fixed code to refresh the Import Procedure Form's preview grid's data source to repaint its contents every time the Call button is pressed. Added code to re-pull connections after connections are migrated from Excel to Workbench. Fixed code so when the Append Data's Automatic Mapping is performed any subsequent change on a mapping resets the mapping to a Manual Mapping. Added code to the InfoDialog class to set the button text to "Show Details" or "Hide Details" depending on the status of the Details text container. Fixed a GUID in the main wix configuration file so now previous versions are uninstalled during a new installation. Added an option to the Export Data's Advanced Options dialog to remove columns with no data, by default the Export Dialog will only flag those columns as Excluded. Added code to display a warning and paint a column red if the column name in the Export Data dialog is not set, display a warning if the table name is not set, and stack warnings but not display them if a column is Excluded, warnings are displayed normally for columns if they are not Excluded anymore.  Added code to prevent the Append and Export of Data if more than 1 selection is made (selecting more than 1 area holding the Ctrl key while selecting Excel cells). Fixed problem that prevented MySQL for Excel from loading when Display settings in Windows 7 is set to Adjust to Best Performance (Oracle bug 14521405 - UNHANDLED EXCEPTION IS THROWN WHEN LOADING MYSQL FOR EXCEL). Fixed code that renames the auto-generated Primary Key column when the Table name changes since it was not detecting if a column with the same name already existed in the table. The column duplication was not actually happening, it looked that way because the automatically generated PK column was not detecting a column had that same name. Fixed code in Export Data dialog to always set an empty string instead of null to the MySQLDataColumn properties that stores MySQL data types (MySQLDataType, RowsFrom1stDataType and RowsFrom2ndDataType). Added code to display a warning and color red a column which Data Type has not been set by the user or has been manually cleared. Added code to output to the application log exception messages consistently in all places where exceptions are catched. A series of blog posts explaining the new Edit MySQL Data feature and the other existing features are coming in this blog. You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.5/en/mysql-for-excel.html You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

    Read the article

  • SQL SERVER – Beginning New Weekly Series – Memory Lane – #001

    - by pinaldave
    I am introducing a new series today.  This series is called “Memory Lane.”  From the last six years and 2,300 articles, there are fantastic articles I keep revisiting.  Sometimes when I read old blog posts I think I should have included something or added a bit more to the topic.  But for many articles, I still feel they are fantastic (even after six years) and could be read again and again. I have also found that after six years of blogging, readers will write to me and say “Pinal, why don’t you write about X, Y or Z.”  The answer is: I already did!  It is here on the blog, or in the comments, or possibly in one of my books.  The solution has always been there, it is simply a matter of finding it and presenting it again.  That is why I have created Memory Lane.  I will be listing the best articles from the same week of the past six years.  You will find plenty of reading material every Saturday from articles of SQLAuthority past. Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Display Foreign Key Relationships and Name of the Constraint for Each Table in Database My blogging journey began with this blog post. As many of you know my journey began with creating a repository of my scripts. This was very first script which I had written to find out foreign key relationship and constraints. The same query was updated later on using the new SYS schema modification in SQL Server. Version 1: Using sys.schema Version 2: Using sys.schema and additional columns 2007 Milestone Posts – 1 Year (365 blogs) and 1 Million Views When I reached 1st week of Nov in 2007 SQLAuthority.com blog had around 365 blog posts and 1 Million Views. I was not obsessed with the statistics before but this was indeed an interesting moment for me as I was blogging for myself and did not realize that so many people are reading my blog. In year 2006 there were not many bloggers so blogging was new to me as well. I was learning it as I go. 2008 Stored Procedure WITH ENCRYPTION and Execution Plan If you have stored procedure and its code is encrypted when you execute it what will be displayed in the execution plan. There are two kinds of execution plans 1) Estimated and 2) Actual. It will be indeed interesting to know what is displayed in both the cases when Stored Procedure is encrypted. What is your guess? Now go ahead and click on here and figure out your answer. If the user is not able to login into SQL Server due to any error or issues there were two different blog post addresses the same issue here and here. 2009 It seems like Nov is the month of SQLPASS month. In 2009 on the same week I was in USA attending SQLPASS event. I had a fantastic experience attending the event. Here are the blog posts covering the subject Day 1, Day 2, Day 3, Day 4 2010 Finding the last backup time for all the databases This little script is very powerful and instantly gives details when was the last time your database backup performed. If you are reading this blog post – I say just go ahead and check if everything is alright on your server and you have all the necessary latest backup. It is better to be safe than sorrow. Version 1: Above script was improved to get more details about the database Version 2: This version of the script will include pretty much have all the backup related information in a single script. Do not miss to save it for future use. Are you a Database Administrator or a Database Developer? Three years ago I created a very small survey and the results which I have received are very interesting. The question was asking what is the profile of the visitor of that blog post and I noticed that DBA and Developers have balanced with little inclination towards Developers. Have you voted so far? If not, go ahead! 2011 New Book Released – SQL Server Interview Questions And Answers One year ago, on November 3, 2011 I published my book SQL Server Interview Questions and Answers.  The book has a lot of great reviews, and we have even received emails telling us this book was a life changer because it helped get them a great new job.  I don’t think anyone can get a job just from my book.  It was the individual who studied hard and took it seriously, and was determined to learn something new.  The book might have helped guide them and show them the topics to study, but they spent their own energy on it.  It was their own skills that helped them pass the exam. So, in this very first installment, I would like to thank the readers for accepting our book, for giving it great reviews and for using it and sharing it.  Our goal in writing this book was to help others, and it seems like we succeeded. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • IBM "per core" comparisons for SPECjEnterprise2010

    - by jhenning
    I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is  13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring  13k/R1  on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

    Read the article

  • SQLAuthority News – #TechEDIn – TechEd India 2012 – Things to Do and Explore for SQL Enthusiast

    - by pinaldave
    TechEd India 2012 is just 48 hours away and I have been receiving lots of requests regarding how SQL enthusiasts can maximize their time they’ll be spending at TechEd India 2012. Trust me – TechEd is the biggest Tech Event in India and it is much larger in magnitude than we can imagine. There are plenty of tracks there and lots of things to do. Honestly, we need clone ourselves multiple times to completely cover the event. However, I am going to talk about SQL enthusiasts only right now. In this post, I’ll share a few things they can do in this big event. But before I start talking about specific things, there is one thing which is a must – Keynote. There are amazing Keynotes planned every single day at TechEd India 2012. One should not miss them at all. Social Media I am a big believer of the social media. I am everywhere - Twitter, Facebook, LinkedIn and GPlus. I suggest you follow the tag #TechEdIn as well as contribute at the healthy conversation going on right now. You may want to follow a few of the SQL Server enthusiasts who are also attending events like TechEd India. This way, you will know where they are and you can contribute along with them. For a good start, you can follow all the speakers who are presenting at the event. I have linked all the speakers’ names with their respective Twitter accounts. Networking Do not stop meeting new people. Introduce yourself. Catch the speakers after their sessions. Meet other SQL experts and discuss SQL as well as life aside SQL. The best way to start the communication is to talk about something new. Here are a few lines I usually use when I have to break the ice: SQL Server 2012 is just released and I have installed it. How many SQL Server sessions are you going to attend? I am going to attend _________ I am a big fan of SQL Server. Sessions Agenda Day 1 T-SQL Rediscovered with SQL Server 2012 - Jacob Sebastian Catapult your data with SQL Server 2012 integration services - Praveen Srivatsa Processing Big Data with SQL Server 2012 and Hadoop  - Stephan Forte SQL Server Misconceptions and Resolution – A Practical Perspective – Pinal Dave and Vinod Kumar Securing with ContainedDB in SQL Server 2012  - Pranab Majumdar Agenda Day 2 Hand-on-Lab – Exploring Power View with SQL Server 2012 – Ravi S. Maniam Hand-on-Lab - SQL Server 2012 – AlwaysOn Availability Groups  - Amit Ganguli Agenda Day 3 Peeling SQL Server like an Onion: Internals Debunked  - Vinod Kumar Speed Up! – Parallel Processes and Unparalleled Performance  - Pinal Dave Keeping Your Database Available – ‘AlwaysOn’  - Balmukund Lakhani Lesser Known Facts of SQL Server Backup and Restore  - Amit Banerjee Top five reasons why you want SQL Server 2012 BI - Praveen Srivatsa Product Booth and Event Partners There will be a dedicated SQL Server booth at the event. I suggest you stop by there and do communication with SQL Server Experts. Additionally there will be booths of various event partners. Stop by their booth and see if they have a product which can help your career. I know that Pluralsight has recently released my course on their online learning site and if that interests you, you can talk about the subject with them. Bring Your Camera Make a list of the people you want to meet. Follow them on Twitter or send them an email and know their location. Introduce yourself, meet them and have your conversation. Do not forget to take a photo with them and later on, share the photo on social media. It would be nice to send an email to everyone with attached high resolution images if you have their email address. After-hours parties After-hours parties are not always about eating and meeting friends but sometimes, they are very informative. Last time I ended up meeting an SQL expert, and we end up talking for long hours on various aspects of SQL Server. After 4 hours, we figured out that he stays in the same apartment complex as mine and since we have had an excellent friendship, he has then become our family friend. So, my advice is that you start to seek out who is meeting where in the evening and see if you can get invited to the parties. Make new friends but never lose mutual respect by doing something silly. Meet Me I will be at the event for three days straight. I will be around the SQL tracks. Please stop by and introduce yourself. I would like to meet you and talk to you. Meeting folks from the Community is very important as we all speak the same language at the end of the day – SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • Towards an F# .NET Reflector add-in

    - by CliveT
    When I had the opportunity to spent some time during Red Gate's recent "down tools" week on a project of my choice, the obvious project was an F# add-in for Reflector . To be honest, this was a bit of a misnomer as the amount of time in the designated week for coding was really less than three days, so it was always unlikely that very much progress would be made in such a small amount of time (and that certainly proved to be the case), but I did learn some things from the experiment. Like lots of problems, one useful technique is to take examples, get them to work, and then generalise to get something that works across the board. Unfortunately, I didn't have enough time to do the last stage. The obvious first step is to take a few function definitions, starting with the obvious hello world, moving on to a non-recursive function and finishing with the ubiquitous recursive Fibonacci function. let rec printMessage message  =     printfn  message let foo x  =    (x + 1) let rec fib x  =     if (x >= 2) then (fib (x - 1) + fib (x - 2)) else 1 The major problem in decompiling these simple functions is that Reflector has an in-memory object model that is designed to support object-oriented languages. In particular it has a return statement that allows function bodies to finish early. I used some of the in-built functionality to take the IL and produce an in-memory object model for the language, but then needed to write a transformer to push the return statements to the top of the tree to make it easy to render the code into a functional language. This tree transform works in some scenarios, but not in others where we simply regenerate code that looks more like CPS style. The next thing to get working was library level bindings of values where these values are calculated at runtime. let x = [1 ; 2 ; 3 ; 4] let y = List.map  (fun x -> foo x) x The way that this is translated into a set of classes for the underlying platform means that the code needs to follow references around, from the property exposing the calculated value to the class in which the code for generating the value is embedded. One of the strongest selling points of functional languages is the algebraic datatypes, which allow definitions via standard mathematical-style inductive definitions across the union cases. type Foo =     | Something of int     | Nothing type 'a Foo2 =     | Something2 of 'a     | Nothing2 Such a definition is compiled into a number of classes for the cases of the union, which all inherit from a class representing the type itself. It wasn't too hard to get such a de-compilation happening in the cases I tried. What did I learn from this? Firstly, that there are various bits of functionality inside Reflector that it would be useful for us to allow add-in writers to access. In particular, there are various implementations of the Visitor pattern which implement algorithms such as calculating the number of references for particular variables, and which perform various substitutions which could be more generally useful to add-in writers. I hope to do something about this at some point in the future. Secondly, when you transform a functional language into something that runs on top of an object-based platform, you lose some fidelity in the representation. The F# compiler leaves attributes in place so that tools can tell which classes represent classes from the source program and which are there for purposes of the implementation, allowing the decompiler to regenerate these constructs again. However, decompilation technology is a long way from being able to take unannotated IL and transform it into a program in a different language. For a simple function definition, like Fibonacci, I could write a simple static function and have it come out in F# as the same function, but it would be practically impossible to take a mass of class definitions and have a decompiler translate it automatically into an F# algebraic data type. What have we got out of this? Some data on the feasibility of implementing an F# decompiler inside Reflector, though it's hard at the moment to say how long this would take to do. The work we did is included the 6.5 EAP for Reflector that you can get from the EAP forum. All things considered though, it was a useful way to gain more familiarity with the process of writing an add-in and understand difficulties other add-in authors might experience. If you'd like to check out a video of Down Tools Week, click here.

    Read the article

  • Kill a tree, save your website? Content strategy in action, part III

    - by Roger Hart
    A lot has been written about how driving content strategy from within an organisation is hard. And that's true. Red Gate is pretty receptive to new ideas, so although I've not had a total walk in the park, it's been a hike with charming scenery. But I'm one of the lucky ones. Lots of people are involved in content, and depending on your organisation some of those people might be the kind who'll gleefully call themselves "stakeholders". People holding a stake generally want to stick it through something's heart and bury it at a crossroads. Winning them over is not always easy. (Richard Ingram has made a nice visual summary of how this can feel - Content strategy Snakes & ladders - pdf ) So yes, a lot of content strategy advocates are having a hard time. And sure, we've got a nice opportunity to get together and have a hug and a cry, but in the interim we could use a hand. What to do? My preferred approach is, I'll confess, brutal. I'd like nothing so much as to take a scorched earth approach to our website. Burn it, salt the ground, and build the new one right: focusing on clearly delineated business and user content goals, and instrumented so we can tell if we're doing it right. I'm never getting buy-in for that, but a boy can dream. So how about just getting buy-in for some small, tenable improvements? Easier, but still non-trivial. I sat down for a chat with our marketing and design guys. It seemed like a good place to start, even if they weren't up for my "Ctrl-A + Delete"  solution. We talked through some of this stuff, and we pretty much agreed that our content is a bit more broken than we'd ideally like. But to get everybody on board, the problems needed visibility. Doing a visual content inventory Print out the internet. Make a Wall Of Content. Seriously. If you've already done a content inventory, you know your architecture, and you know the scale of the problem. But it's quite likely that very few other people do. So make it big and visual. I'm going to carbon hell, but it seems to be working. This morning, I printed out a tiny, tiny part of our website: the non-support content pertaining to SQL Compare I made big, visual, A3 blowups of each page, and covered a wall with them. A page per web page, spread over something like 6M x 2M, with metrics, right in front of people. Even if nobody reads it (and they are doing) the sheer scale is shocking. 53 pages, all told. Some are redundant, some outdated, some trivial, a few fantastic, and frighteningly many that are great ideas delivered not-quite-right. You have to stand quite far away to get it all in your field of vision. For a lot of today, a whole bunch of folks have been gawping in amazement, talking each other through it, peering at the details, and generally getting excited about content. Developers, sales guys, our CEO, the marketing folks - they're engaged. Will it last? I make no promises. But this sort of wave of interest is vital to getting a content strategy project kicked off. While the content strategist is a saucer-eyed orphan in the cupboard under the stairs, they're not getting a whole lot done. Of course, just printing the site won't necessarily cut it. You have to know your content, and be able to talk about it. Ideally, you'll also have page view and time-on-page metrics. One of the most powerful things you can do is, when people are staring at your wall of content, ask them what they think half of it is for. Pretty soon, you've made a case for content strategy. We're also going to get folks to mark it up - cover it with notes and post-its, let us know how they feel about our content. I'll be blogging about how that goes, but it's exciting. Different business functions have different needs from content, so the more exposure the content gets, and the more feedback, the more you know about those needs. Fingers crossed for awesome.

    Read the article

  • User Productivity Kit - Powerful Packages (Part 2)

    - by [email protected]
    In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory.  Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

    Read the article

  • Open World Day 3

    - by Antony Reynolds
    A Day in the Life of an Oracle OpenWorld Attendee Part IV My third day was exhibition day for me!  I took the opportunity to wander around the JavaOne and OpenWorld exhibitions to see what might be useful for me when selling WebLogic, Coherence & SOA Suite.  I found a number of interesting vendors and thought I would share what I found here.  These are not necessarily endorsements, but observations on companies that I thought had interesting looking products that fill a need I have seen at customers. Highly Available EBS Upgrades A few years ago I worked with a customer that was a port authority.  They wanted to tie E-Business Suite into their operations to provide faster processing of cargo and passengers.  However they only had a 2 hour downtime window to perform upgrades.  This was not a problem for core database and middleware technology, this could accommodate those upgrade timescales easily.  It was a problem for EBS however so I intrigued to find Rapid E-Suite Inc offering an 11i to 12i upgrade service that claims to require no outage.  This could be a real boon to EBS customers like my port friends that need to upgrade without disruption to their business. Mobile on WebLogic I have come across a number of customers who want a comprehensive mobile solution, connected and disconnected operation and so forth.  ADF only addresses part of these requirements currently so I was excited to discover mFrontiers Inc offering an apparently comprehensive solution that should integrate easily with Oracle SOA Suite to mobile enable a SOA infrastructure.  The ability to operate without a network is important for many applications, particularly in industries that require their engineers to enter buildings to perform maintenance or repairs, because network access is not always available – many of my colleagues don’t have mobile access from their homes because they live in the middle of nowhere – and disconnected support is crucial in these situations. Sharepoint Connector for WebCenter Content Obviously Sharepoint is an evil pernicious intrusion into a companies IT estate but it is widely deployed and many people like it but also would like to take advantage of Oracle products such as WebCenter Content.  So I was encouraged to see that Fishbowl Solutions have created a connector for Sharepoint that allows it to bring in content from WebCenter, it looks like a valuable way to maintain the Sharepoint interface end users are used to but extend the range of content by pulling stuff (technical term for content) from WebCenter.   Load Balancing The Enterprise Deployment Guides are Oracles bible on building highly available FMW environments, and each of them requires a front end load balancer.  I have been asked to help configure F5 Load Balancers on a number of occasions over my time at Oracle and each time I come back to it I find more useful features have been added to the BigIP line of load balancers that F5 sell, many of their documents are tailored to FMW.  I like F5, they provide (relatively) easy to use products that do what they say on the side of the box.  They may not have all the bells and whistles of some of their more expensive competitors but they do the job and do it well!  Besides which I like their logo! Other Stuff I saw lots of other interesting products and services, such as a lightweight monitoring tool for Coherence, Forms migration services, JCAPS migration services and lots of cool freebies to take home to the children! A Quiet Night Wednesday night was the partner appreciation event and I had decided to go back to the hotel and have an early night.  I decided to attend the last session of the day – a Maven/Hudson/WebLogic tutorial.  I got the wrong hotel for the session and snuck in 20 minutes late at the back and starting working on the hands on workshop.  One of my co-attendees raised his hand for help and as the presenter came over to help he suddenly stopped and yelled – “Is that Antony”!  It was my old friend Steve Button who used to be based in Redwood Shores but is now a WebLogic guru PM in Australia.  It was good to catch up with him.  As he yelled out a guy with really bad posture turned around to see who he was talking to, this turned out to be my friend Simon Haslan, Oracle ACE from the UK.  After the tutorial Simon and I retired to the coffee shop to catch up and share stories.  2 and half hours later we decided it was time to retire, so much for an early night but great to renew old friendships and find out what real customers are worrying about.

    Read the article

  • 5 minutes WIF: Make your ASP.NET application use test-STS

    - by DigiMortal
    Windows Identity Foundation (WIF) provides us with simple and dummy STS application we can use to develop our system with no actual STS in place. In this posting I will show you how to add STS support to your existing application and how to generate dummy application that plays you real STS. Word of caution! Although it is relatively easy to build your own STS using WIF tools I don’t recommend you to build it. Identity providers must be highly secure and stable in every means and this makes development of your own STS very complex task. If it is possible then use some known STS solution. I suppose you have WIF and WIF SDK installed on your development machine. If you don’t then here are the links to download pages: Windows Identity Foundation Windows Identity Foundation SDK Adding STS support to your web application Suppose you have web application and you want to externalize authentication so your application is able to detect users, send unauthenticated users to login and work in other terms exactly like it worked before. WIF tools provide you with all you need. 1. Click on your web application project and select “Add STS reference…” from context menu to start adding or updating STS settings for web application. 2. Insert your application URI in application settings window. Note that web.config file is already selected for you. I inserted URI that corresponds to my web application address under IIS Express. This URI must exist (later) because otherwise you cannot use dummy STS service. 3. Select “Create a new STS project in the current solution” and click Next button. 4. Summary screen gives you information about how your site will use STS. You can run this wizard always when you have to modify STS parameters. Click Finish. If everything goes like expected then new web site will be added to your solution and it is named as YourWebAppName_STS. Dummy STS application Image on right shows you dummy STS web site. Yes, it is created as web site project not as web application. But it still works nice and you don’t have to make there any modifications. It just works but it is dummy one. Why dummy STS? Some points about dummy STS web site: Dummy STS is not template for your own custom STS identity provider. Dummy STS is very good and simple replacement of real STS so you have more flexible development environment and you don’t have to authenticate yourself in real service. Of course, you can modify dummy STS web site to mimic some behavior of your real STS. Pages in dummy STS Dummy STS has two pages – Login.aspx and  Default.aspx. Default.aspx is the page that handles requests to STS service. Login.aspx is the page where authentication takes place. Dummy STS authenticates users using FBA. You can insert whatever username you like and dummy STS still works. You can take a look at the code behind these pages to get some idea about how this dummy service is built up. But again – this service is there to simplify your life as developer. Authenticating users using dummy STS If you are using development web server that ships with Visual Studio 2010 I suggest you to switch over to IIS or IIS Express and make some more configuration changes as described in my previous posting Making WIF local STS to work with your ASP.NET application. When you are done with these little modifications you are ready to run your application and see how authentication works. If everything is okay then you are redirected to dummy STS login page when running your web application. Adam Carter is provided as username by default. If you click on submit button you are authenticated and redirected to application page. In my case it looks like this. Conclusion As you saw it is very easy to set up your own dummy STS web site for testing purposes. You coded nothing. You just ran wizard, inserted some data, modified configuration a little bit and you were done. Later, when your application goes to production you can run again this STS configuration utility and it generates correct settings for your real STS service automatically.

    Read the article

  • MSSQL: Copying data from one database to another

    - by DigiMortal
    I have database that has data imported from another server using import and export wizard of SQL Server Management Studio. There is also empty database with same tables but it also has primary keys, foreign keys and indexes. How to get data from first database to another? Here is the description of my crusade. And believe me – it is not nice one. Bugs in import and export wizard There is some awful bugs in import and export wizard that makes data imports and exports possible only on very limited manner: wizard is not able to analyze foreign keys, wizard wants to create tables always, whatever you say in settings. The result is faulty and useless package. Now let’s go step by step and make things work in our scenario. Database There are two databases. Let’s name them like this: PLAIN – contains data imported from remote server (no indexes, no keys, no nothing, just plain dumb data) CORRECT – empty database with same structure as remote database (indexes, keys and everything else but no data) Our goal is to get data from PLAIN to CORRECT. 1. Create import and export package In this point we will create faulty SSIS package using SQL Server Management Studio. Run import and export wizard and let it create SSIS package that reads data from CORRECT and writes it to, let’s say, CORRECT-2. Make sure you enable identity insert. Make sure there are no views selected. Make sure you don’t let package to create tables (you can miss this step because it wants to create tables anyway). Save package to SSIS. 2. Modify import and export package Now let’s clean up the package and remove all faulty crap. Connect SQL Server Management Studio to SSIS instance. Select the package you just saved and export it to your hard disc. Run Business Intelligence Studio. Create new SSIS project (DON’T MISS THIS STEP). Add package from disc as existing item to project and open it. Move to Control Flow page do one of following: Remove all preparation SQL-tasks and connect Data Flow tasks. Modify all preparation SQL-tasks so the existence of tables is checked before table is created (yes, you have to do it manually). Add new Execute-SQL task as first task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL' GO   EXEC sp_MSForEachTable 'DELETE FROM ?' GO   Save task. Add new Execute-SQL task as last task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? CHECK CONSTRAINT ALL' GO   Save task Now connect first Execute-SQL task with first Data Flow task and last Data Flow task with second Execute-SQL task. Now move to Package Explorer tab and change connections under Connection Managers folder. Make source connection to use database PLAIN. Make destination connection to use database CORRECT. Save package and rebuilt the project. Update package using SQL Server Management Studio. Some hints: Make sure you take the package from solution folder because it is saved there now. Don’t overwrite existing package. Use numeric suffix and let Management Studio to create a new version of package. Now you are done with your package. Run it to test it and clean out all the errors you find. TRUNCATE vs DELETE You can see that I used DELETE FROM instead of TRUNCATE. Why? Because TRUNCATE has some nasty limits (taken from MSDN): “You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint; instead, use DELETE statement without a WHERE clause. Because TRUNCATE TABLE is not logged, it cannot activate a trigger. TRUNCATE TABLE may not be used on tables participating in an indexed view.” As I am not sure what tables you have and how they are used I provided here the solution that should work for all scenarios. If you need better performance then in some cases you can use TRUNCATE table instead of DELETE. Conclusion My conclusion is bitter this time although I am very positive guy. It is A.D. 2010 and still we have to write stupid hacks for simple things. Simple tools that existed before are long gone and we have to live mysterious bloatware that is our only choice when using default tools. If you take a look at the length of this posting and the count of steps I had to do for one easy thing you should treat it as a signal that something has went wrong in last years. Although I got my job done I would be still more happy if out of box tools are more intelligent one day. References T-SQL Trick for Deleting All Data in Your Database (Mauro Cardarelli) TRUNCATE TABLE (MSDN Library) Error Handling in SQL 2000 – a Background (Erland Sommarskog) Disable/Enable Foreign Key and Check constraints in SQL Server (Decipher)

    Read the article

  • T-SQL Tuesday #21 - Crap!

    - by Most Valuable Yak (Rob Volk)
    Adam Machanic's (blog | twitter) ever popular T-SQL Tuesday series is being held on Wednesday this time, and the topic is… SHIT CRAP. No, not fecal material.  But crap code.  Crap SQL.  Crap ideas that you thought were good at the time, or were forced to do due (doo-doo?) to lack of time. The challenge for me is to look back on my SQL Server career and find something that WASN'T crap.  Well, there's a lot that wasn't, but for some reason I don't remember those that well.  So the additional challenge is to pick one particular turd that I really wish I hadn't squeezed out.  Let's see if this outline fits the bill: An ETL process on text files; That had to interface between SQL Server and an AS/400 system; That didn't use SSIS (should have) or BizTalk (ummm, no) but command-line scripting, using Unix utilities(!) via: xp_cmdshell; That had to email reports and financial data, some of it sensitive Yep, the stench smell is coming back to me now, as if it was yesterday… As to why SSIS and BizTalk were not options, basically I didn't know either of them well enough to get the job done (and I still don't).  I also had a strict deadline of 3 days, in addition to all the other responsibilities I had, so no time to learn them.  And seeing how screwed up the rest of the process was: Payment files from multiple vendors in multiple formats; Sent via FTP, PGP encrypted email, or some other wizardry; Manually opened/downloaded and saved to a particular set of folders (couldn't change this); Once processed, had to be placed BACK in the same folders with the original archived; x2 divisions that had to run separately; Plus an additional vendor file in another format on a completely different schedule; So that they could be MANUALLY uploaded into the AS/400 system (couldn't change this either, even if it was technically possible) I didn't feel so bad about the solution I came up with, which was naturally: Copy the payment files to the local SQL Server drives, using xp_cmdshell Run batch files (via xp_cmdshell) to parse the different formats using sed, a Unix utility (this was before Powershell) Use other Unix utilities (join, split, grep, wc) to process parsed files and generate metadata (size, date, checksum, line count) Run sqlcmd to execute a stored procedure that passed the parsed file names so it would bulk load the data to do a comparison bcp the compared data out to ANOTHER text file so that I could grep that data out of the original file Run another stored procedure to import the matched data into SQL Server so it could process the payments, including file metadata Process payment batches and log which division and vendor they belong to Email the payment details to the finance group (since it was too hard for them to run a web report with the same data…which they ran anyway to compare the emailed file against…which always matched, surprisingly) Email another report showing unmatched payments so they could manually void them…about 3 months afterward All in "Excel" format, using xp_sendmail (SQL 2000 system) Copy the unmatched data back to the original folder locations, making sure to match the file format exactly (if you've ever worked with ACH files, you'll understand why this sucked) If you're one of the 10 people who have read my blog before, you know that I love the DOS "for" command.  Like passionately.  Like fairy-tale love.  So my batch files were riddled with for loops, nested within other for loops, that called other batch files containing for loops.  I think there was one section that had 4 or 5 nested for commands.  It was wrong, disturbed, and completely un-maintainable by anyone, even myself.  Months, even a year, after I left the company I got calls from someone who had to make a minor change to it, and they called me to talk them out of spraying the office with an AK-47 after looking at this code.  (for you Star Trek TOS fans) The funniest part of this, well, one of the funniest, is that I made the deadline…sort of, I was only a day late…and the DAMN THING WORKED practically unchanged for 3 years.  Most of the problems came from the manual parts of the overall process, like forgetting to decrypt the files, or missing/late files, or saved to the wrong folders.  I'm definitely not trying to toot my own horn here, because this was truly one of the dumbest, crappiest solutions I ever came up with.  Fortunately as far as I know it's no longer in use and someone has written a proper replacement.  Today I would knuckle down and do it in SSIS or Powershell, even if it took me weeks to get it right. The real lesson from this crap code is to make things MAINTAINABLE and UNDERSTANDABLE.  sed scripting regular expressions doesn't fit that criteria in any way.  If you ever find yourself under pressure to do something fast at all costs, DON'T DO IT.  Stop and consider long-term maintainability, not just for yourself but for others on your team.  If you can't explain the basic approach in under 5 minutes, it ultimately won't succeed.  And while you may love to leave all that crap behind, it may follow you anyway, and you'll step in it again.   P.S. - if you're wondering about all the manual stuff that couldn't be changed, it was because the entire process had gone through Six Sigma, and was deemed the best possible way.  Phew!  Talk about stink!

    Read the article

  • Common usecases and techniques when integrating a 3rd party application with Oracle Sales Cloud

    - by asantaga
    Over the last year or so I've see a lot of partners migrating and integrate their applications with Oracle Sales Cloud. Interestingly I'd say 60% of the partners use the same set of design patterns over and over again. Most of the time I see that they want to embed their application into Oracle Sales Cloud, within a tab usually, perhaps click on a link to their application (passing some piece of data + credentials) and then within their application update sales cloud again using webservices. Here are some examples of the different use-cases I've seen , and how partners are embedding their applications into Sales Cloud, NB : The following examples use the "Desktop" User Interface rather than the Newer "Simplified User Interface", I'll update the sample application soon but the integration patterns are precisely the same Use Case 1 :  Navigator "Link out" to third party application This is an example of where the developer has added a link to the global navigator and this links out to the 3rd Party Application. Typically one doesn't pass any contextual data with the exception of perhaps user credentials, or better still JWT Token. Techniques Used   Adding Link to Menu Item Using JWT Token in Sales Cloud Use Case 2 : Application Embedded within the Sales Cloud Dashboard Within the Oracle Sales Cloud application there is a tab called "Sales", within this tab its possible to embed a SubTab and embed a iFrame pointing to your application. To do this the developer simply needs to edit the page in customization mode, add the tab and then add the iFrame, simples! The developer can pass credentials/JWT Token and some other pieces of data but not object data (ie the current OpportunityID etc)  Techniques Used Adding a page to the dashboard  Using JWT Token in Sales Cloud  Use Case 3 : Embedding a Tab and Context Linking out from a Sales Cloud object to the 3rd party application In this usecase the developer embeds two components into Oracle Sales Cloud. The first is a SubTab showing summary data to the user (a quote in our case) and then secondly a hyperlink, (although it could be a button) which when clicked navigates the user to the 3rd party application. In this case the developer almost always passes context specific data (i.e. the opportunityId) and a security token (username password combo or JWT Token). The third party application usually takes the data, perhaps queries more data using the Sales Cloud SOAP/WebService interface and then displays the resulting mashup to the user for further processing. When the user has finished their work in the 3rd party application they normally navigate back to Oracle Sales Cloud using what's called a "DeepLink", ie taking them back to the object [opportunity in our case] they came from. This image visually shows a "Happy Path" a user may follow, and combines linking out to an application , webservice calls and deep linking back to Sales Cloud. Techniques Used Extending a SalesCloud application with a custom button Using JWT Token in Sales Cloud Extending Oracle Sales Cloud [Opportnity] with a custom tab exposing External Content Retrieving Data from Oracle Sales cloud using WebServices Coding some groovy script to generate the URLs required (Doc 1571200.1 on MyOracle Support) DeepLinking to specific Oracle Sales Cloud Pages (Doc 1516151.1 on My Oracle Support) Use-Case 4 :  Server Side processing/synchronization This usecase focuses on the Server Side processing of data, in this case synchronizing data. Here the 3rd party application is running on a "timer", e.g. cron or similar, and when triggered it queries data from Oracle Sales Cloud, then it queries data from the 3rd party application, determines the deltas and then inserts the data where required. Specifically here we are calling Oracle Sales Cloud using SOAP/WebServices and the 3rd party application is being communicated to using the REST API, for Oracle Sales Cloud one would use standard JAX-WS WebService calls and for REST one would use the JAX-RS api and perhap the Jackson api for managing JSON objects.. This is a very common use case and one which specifically lends itself to using the Oracle Java Cloud Service as the ideal application server where to host the mediator between the two applications.  Techniques Used Using JWT Token in Sales Cloud Integrating with the Oracle Java Cloud Service Retrieving Data from Oracle Sales cloud using WebServices General Resources The above is just a small set of techniques and use-cases which are used today. There are plenty of other sources of documentation and resources available on the internet but to get you started here are a few of my favourite places  Sales Cloud General Documentation Sales Cloud Customize Tab is useful for general customization of Sales Cloud Sales Cloud Integration Tab focuses on the 3rd party integration techniques  Official Oracle Fusion Developer Relations Blog Official Oracle Fusion Developer Relations YouTube Channel Enjoy integrating! 

    Read the article

  • Problems with opening CHM Help files from Network or Internet

    - by Rick Strahl
    As a publisher of a Help Creation tool called Html Help Help Builder, I’ve seen a lot of problems with help files that won't properly display actual topic content and displays an error message for topics instead. Here’s the scenario: You go ahead and happily build your fancy, schmanzy Help File for your application and deploy it to your customer. Or alternately you've created a help file and you let your customers download them off the Internet directly or in a zip file. The customer downloads the file, opens the zip file and copies the help file contained in the zip file to disk. She then opens the help file and finds the following unfortunate result:     The help file  comes up with all topics in the tree on the left, but a Navigation to the WebPage was cancelled or Operation Aborted error in the Help Viewer's content window whenever you try to open a topic. The CHM file obviously opened since the topic list is there, but the Help Viewer refuses to display the content. Looks like a broken help file, right? But it's not - it's merely a Windows security 'feature' that tries to be overly helpful in protecting you. The reason this happens is because files downloaded off the Internet - including ZIP files and CHM files contained in those zip files - are marked as as coming from the Internet and so can potentially be malicious, so do not get browsing rights on the local machine – they can’t access local Web content, which is exactly what help topics are. If you look at the URL of a help topic you see something like this:   mk:@MSITStore:C:\wwapps\wwIPStuff\wwipstuff.chm::/indexpage.htm which points at a special Microsoft Url Moniker that in turn points the CHM file and a relative path within that HTML help file. Try pasting a URL like this into Internet Explorer and you'll see the help topic pop up in your browser (along with a warning most likely). Although the URL looks weird this still equates to a call to the local computer zone, the same as if you had navigated to a local file in IE which by default is not allowed.  Unfortunately, unlike Internet Explorer where you have the option of clicking a security toolbar, the CHM viewer simply refuses to load the page and you get an error page as shown above. How to Fix This - Unblock the Help File There's a workaround that lets you explicitly 'unblock' a CHM help file. To do this: Open Windows Explorer Find your CHM file Right click and select Properties Click the Unblock button on the General tab Here's what the dialog looks like:   Clicking the Unblock button basically, tells Windows that you approve this Help File and allows topics to be viewed.   Is this insecure? Not unless you're running a really old Version of Windows (XP pre-SP1). In recent versions of Windows Internet Explorer pops up various security dialogs or fires script errors when potentially malicious operations are accessed (like loading Active Controls), so it's relatively safe to run local content in the CHM viewer. Since most help files don't contain script or only load script that runs pure JavaScript access web resources this works fine without issues. How to avoid this Problem As an application developer there's a simple solution around this problem: Always install your Help Files with an Installer. The above security warning pop up because Windows can't validate the source of the CHM file. However, if the help file is installed as part of an installation the installation and all files associated with that installation including the help file are trusted. A fully installed Help File of an application works just fine because it is trusted by Windows. Summary It's annoying as all hell that this sort of obtrusive marking is necessary, but it's admittedly a necessary evil because of Microsoft's use of the insecure Internet Explorer engine that drives the CHM Html Engine's topic viewer. Because help files are viewing local content and script is allowed to execute in CHM files there's potential for malicious code hiding in CHM files and the above precautions are supposed to avoid any issues. © Rick Strahl, West Wind Technologies, 2005-2012 Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Upcoming User Group Events in 2011

    - by john.orourke(at)oracle.com
    At a recent customer event, someone asked me if Oracle had any plans to re-create the Hyperion Solutions Conference.  Unfortunately the answer is no.  With so many different product lines it would be challenging and costly for Oracle to run separate user conferences for every product line, and it would create too many events for customers with multiple products to attend.  So Oracle Open World is the company's main event for showcasing what's new and what's coming across all product lines.  If customers find Oracle OpenWorld too overwhelming or if the timing is bad, there are a number of other conferences, which are run by Oracle user groups and include a number of sessions focused on Oracle Hyperion EPM and BI products.  Here's a sneak preview of what's coming up for conferences in 2011 where you can network with other Hyperion users and learn what's new and what's coming in our products. Alliance 2011:  This conference is run by the Oracle Higher Education User Group (HEUG).  It's being held March 27 - 30th in lovely Denver, Colorado.  (a great location and time for skiers!)  This event is targeted at customers in Higher Education and Public Sector organizations and is expecting to draw over 3,500 attendees.  There will be a number of sessions focusing on Oracle Hyperion EPM and BI products in the Budgeting track, as well as the Reporting & BI track.  This includes product-focused sessions delivered by Oracle and partners, as well as case studies delivered by customers.  Here's a link to the registration page where you can get more information: http://www.heug.org/p/cm/ld/fid=255 Collaborate 2011:  This conference is run by three different user groups;  OAUG, IOUG and Quest.  It's being held April 10 - 14th in sunny Orlando, Florida.  (yes, sunshine and warmth!)  This event is targeted to customers with Oracle E-Business Suite, PeopleSoft, JD Edwards, Hyperion, Primavera and other products and is expected to draw over 5,000 attendees.  You'll find a number of sessions focused on Oracle Hyperion EPM and BI products in the BI/Data Warehousing/EPM track.  This includes product-focused sessions delivered by Oracle, our partners, and customers as well as a number of customer case studies.  There will also be an exhibit area with a number of demo pods focused on EPM and BI products.  Here's a link to the conference web site where you can get more information: http://collaborate.oaug.org/ Also, please note that the OAUG has a Hyperion SIG that runs focused EPM/Hyperion events throughout the year.  Here's a link to their web site where you can get more information: http://hyperionsig.oaug.org/ Kscope 2011:  Formerly the Kaleidoscope conference, this one is run by the Oracle Developer Tools User Group (ODTUG).  This conference is being held June 26 - 30th in Long Beach, CA. (surf's up!)  Historically, this event has focused on Oracle Development tools, but over the past few years the EPM and BI content has grown with over 100 sessions planned this year.  So this event is becoming a great venue for existing Hyperion customers to learn about the latest developments with Oracle Essbase, Hyperion Planning, Hyperion Financial Management, Oracle BI and other products.   You'll also find hands-on workshops, product demonstrations as well as EPM and BI Symposiums run by Oracle Development staff.  Here's a link to the web site where you can get more details.  http://www.kscope11.com/biepm UKOUG Conference Series:  EPM and Hyperion 2011:  For Hyperion customers in the UK, the UKOUG has a Hyperion SIG that runs a focused conference for EPM and Hyperion products.  The 2011 event is planned for June in London.  Here's a link to the web site for this event where you can get more information: http://hyperion.ukoug.org/default.asp?p=8461 In addition to these conferences, you can also find Oracle EPM and BI content at regional user group meetings globally as well as Marketing events run by Oracle.  Check the events page at www.oracle.com for the details on upcoming Marketing and regional User Group events.  So while Oracle will not be trying to replicate the Hyperion Solutions conference, the good news is that there are a number of other events available where customers can find out what's new and what's coming with Oracle EPM and BI products.  And these events are running at different times of the year in different locations - so you can pick the event that makes the most sense for your company from a timing and location standpoint. I'll be delivering a number of sessions at the Alliance and Collaborate conferences and hope to see many of our loyal customers and partners at these events.  And there's always Oracle OpenWorld coming up in October, for which the planning has already started.  I look forward to seeing you in 2011.

    Read the article

  • WebCenter Content (WCC) Trace Sections

    - by Kevin Smith
    Kyle has a good post on how to modify the size and number of WebCenter Content (WCC) trace files. His post reminded me I have been meaning to write a post on WCC trace sections for a while. searchcache - Tells you if you query was found in the WCC search cache. searchquery - Shows the processing of the query as it is converted form what the user submitted to the end query that will be sent to the database. Shows conversion from the universal query syntax to the syntax specific to the search solution WCC is configured to use. services (verbose) - Lists the filters that are called for each service. This will let you know what filters are available for each service and will also tell you what filters are used by WCC add-on components and any custom components you have installed. The How To Component Sample has a list of filters, but it has not been updated since 7.5, so it is a little outdated now. With each new release WCC adds more filters. If you have a filter that has no code attached to it you will see output like this: services/6    09.25 06:40:26.270    IdcServer-423    Called filter event computeDocName with no filter plugins registered When a WCC add-on or custom component uses a filter you will see trace output like this: services/6    09.25 06:40:26.275    IdcServer-423    Calling filter event postValidateCheckinData on class collections.CollectionValidateCheckinData with parameter postValidateCheckinDataservices/6    09.25 06:40:26.275    IdcServer-423    Calling filter event postValidateCheckinData on class collections.CollectionFilters with parameter postValidateCheckinData As you can see from this sample output it is possible to have multiple code points using the same filter. systemdatabase - Dumps the database call AFTER it executes. This can be somewhat troublesome if you are trying to track down some weird database problems. We had a problem where WCC was getting into a deadlock situation. We turned on the systemdatabase trace section and thought we had the problem database call, but it turned out since it printed out the database call after it was executed we were looking at the database call BEFORE the one causing the deadlock. We ended up having to turn on tracing at the database level to see the database call WCC was making that was causing the deadlock. socketrequests (verbose) - dumps the actual messages received and sent over the socket connection by WCC for a service. If you have gzip enabled you will see junk on the response coming back from WCC. For debugging disable the gzip of the WCC response.Here is an example of the dump of the request for a GET_SEARCH_RESULTS service call. socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: REMOTE_USER=sysadmin.USER-AGENT=Java;.Stel socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: lent.CIS.11g.CONTENT_TYPE=text/html.HEADER socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: _ENCODING=UTF-8.REQUEST_METHOD=POST.CONTEN socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: T_LENGTH=270.HTTP_HOST=CIS.$$$$.NoHttpHead socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: ers=0.IsJava=1.IdcService=GET_SEARCH_RESUL socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: [email protected] socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: calData.SortField=dDocName.ClientEncoding= socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: UTF-8.IdcService=GET_SEARCH_RESULTS.UserTi socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: meZone=UTC.UserDateFormat=iso8601.SortDesc socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: =ASC.QueryText=dDocType..matches..`Documen socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: t`.@end. userstorage, jps - Provides trace details for user authentication and authorization. Includes information on the determination of what roles and accounts a user has access to. In 11g a new trace section, jps, was added with the addition of the JpsUserProvider to communicate with WebLogic Server. The WCC developers decide when to use the verbose option for their trace output, so sometime you need to try verbose to see what different information you get. One of the things I would always have liked to see if the ability to turn on verbose output selectively for individual trace sections. When you turn on verbose output you get it for all trace sections you have enabled. This can quickly fill up your trace files with a lot of information if you have the socket trace section turned on.

    Read the article

  • Java2Days 2012 Trip Report

    - by reza_rahman
    Java2Days 2012 was held in beautiful Sofia, Bulgaria on October 25-26. For those of you not familiar with it, this is the third installment of the premier Java conference for the Balkan region. It is an excellent effort by admirable husband and wife team Emo Abadjiev and Iva Abadjieva as well as the rest of the Java2Days team including Yoana Ivanova and Nadia Kostova. Thanks to their hard work, the conference continues to grow vigorously with almost a thousand enthusiastic, bright young people attending this year and no less than three tracks on Java, the Cloud and Mobile. The conference is a true gem in this region of the world and I am very proud to have been a part of it again, along with the other world class speakers the event rightfully attracts. It was my honor to present the first talk of the conference. It was a full-house session on Java EE 7 and 8 titled "JavaEE.Next(): Java EE 7, 8, and Beyond". The talk was primarily along the same lines as Arun Gupta's JavaOne 2012 technical keynote. I covered the changes in JMS 2, the Java API for WebSocket (JSR 356), the Java API for JSON Processing (JSON-P), JAX-RS 2, JCache, JPA 2.1, JTA 1.2, JSF 2.2, Java Batch, Bean Validation 1.1 and the rest of the APIs in Java EE 7. I also briefly talked about the possible contents of Java EE 8. My stretch goal was to gather some feedback on some open issues in the Java EE EG (more on that soon) but I ran out of time in the short format forty-five minute session. The talk was received well and I had some pretty good discussions afterwards. The slides for the talk are here: JavaEE.Next(): Java EE 7, 8, and Beyond from reza_rahman To my delight, the Java2Days folks were very interested in my domain-driven design/Java EE 6 talk (titled "Domain Driven Design with Java EE 6"). I've had this talk in my inventory for a long time now but it always gets overridden by less theoretical talks on APIs, tools, etc. The talk has three parts -- a brief overview of DDD theory, mapping DDD to Java EE and actual running DDD code in Java EE 6/GlassFish. For the demo, I converted the well-known DDD sample application (http://dddsample.sourceforge.net/) written mostly in Spring 2 and Hibernate 2 to Java EE 6. My eventual plan is to make the code available via a top level java.net project. Even despite the broad topic and time constraints, the talk went very well. It was a full house, the Q & A was excellent and one of the other speakers even told me they thought this was the best talk of the conference! The slides for the talk are here: Domain Driven Design with Java EE 6 from Reza Rahman The code examples are available here: https://blogs.oracle.com/reza/resource/dddsample.zip for now, as a simple zip file. Give me a shout if you would like to get it up and running. It was also a great honor to present the last session of the conference. It was a talk on the Java API for WebSocket/JSR 356 titled "Building HTML5/WebSocket Applications with JSR 356 and GlassFish". The talk is based on Danny Coward's JavaOne 2012 talk. The talk covers the basic of WebSocket, the JSR 356 API and a simple demo using Tyrus/GlassFish. The talk went very well and there were some very good questions afterwards. The slides for the talk are here: Building HTML5/WebSocket Applications with GlassFish and JSR 356 from Reza Rahman The code samples are available here: https://blogs.oracle.com/arungupta/resource/totd183-HelloWebSocket.zip. You'll need the latest promoted GlassFish 4 build to run the code. Give me a shout if you need help. Besides presenting my talks, I got to attend some great sessions on OSGi, HTML5, cloud, agile and Java 8. I got an invite to speak at the Macedonia JUG when possible. Victor Grazi of InfoQ wrote about my sessions and Java2Days here: http://www.infoq.com/news/2012/11/Java2DaysConference. Stoyan Rachev was very kind to blog about my sessions here: http://www.stoyanr.com/2012/11/java2days-2012-java-ee.html. I definitely enjoyed Java2Days 2012 and hope to be part of the conference next year!

    Read the article

< Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >