Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 647/678 | < Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >

• Setting up a WPA-PSK network card to connect to a WPA2 network

  - by mattshepherd

  I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network. I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head. It can find the network fine, but when I try to connect, I don't get the password prompt -- it moves straight to "validating identity," scans, and then says "Windows was not able to find a certificate to log you on to the wireless network Foo." The maddening thing is that the card was working fine a week ago, in the same box, using the same OS. I pulled everything out, swapped out the motherboard, and reinstalled Windows on a freshly wiped hard drive, and now I can't get it up and running again. Suggestions? I've taken several runs at it, including attempting to manually change the settings for the network to include WPA-PSK and AES and the password, and I'm a bit worried that I've totally boned everything. My router settings: ipconfig/all results from the XP box: Again, this card was working on this network a week ago. I can't figure out why I can't get it up and running now. There's no WPA2 on the card, just WPA and WPA-PSK: WPA-PSK was the only setting that would let me enter a network key. I had TKIP and AES as options there, but cipher type is AES on the router, so I chose that. (I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key. It's mixed letters and numbers, 32 characters long. No joy. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up. And if I try again and return to the settings again, it is reset to Open/AES. It also re-enables 802.1x in the Authentication tab if I've deselected it with WPA-PSK. It also reshortens the password. I have no idea how I blundered into getting this working in the past. I am, as you can tell, far from proficient at this. It was working before, though. What am I getting wrong?

  Read the article

• Fast user switching suddenly stopped working on my Windows XP Prof machine

  - by John

  When I start Win XP SP2 I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups is listed. I did a windows repair with no luck. I tried doing restore points but it said they didn’t work. Please help? My wife and I have been using fast user switching on out computer for years with no problem. Beginning a few months ago, I started Win XP Prof one day I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows with an account of owner. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups are listed. I have done system point restores and imports of exports of the registry I take with import. I have tried everything under safe mode and it makes no difference. This followed a Microsoft update the night before as I left the computer on. I tried to do a restore point but all my restore points failed and could not backout the MS updates. I was working with a fellow from Microsoft and he had me do all kinds of things but to no avail. He seems to think a DLL file is corrupt but which one? Finally in desperation he sent me a new OS XP Prof SP3 disk and I installed it and it wiped my hard drive. Luckily I took an Acronis Image backup first so I easily restored my system. I do not want to do a fresh windows update as it is heavily customized and worked fine up to that point. This has been going on for months, Thanks John

  Read the article

• Debugging IO limitation

  - by Martin F

  I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

  Read the article

• Fedora 13 post security update boot problem

  - by Alex

  Hello. About a month ago I installed a security update that had new Kernek 2.6.34.x from 2.6.33.x), this is when the problem occurred for the first time. After the install my computer would not boot at all, black screen without any visible hard drive activity (I gave it good 30 minutes on black screen, before took actions)... I poped in installation DVD and went in rescue mode to change back the boot option to old kernel (was just a guess where the problem was). After restart computer loaded just file, took a long time for it to start because of SELinux targeted policy relabel is required. Relabeling could take very long time depending on file size. I assumed that the update got messed up somehow and continued working with modified boot option. Couple of days ago, there was another kernel update. I installed it and same problem as before. This rules out corrupted update theory... Black screen right after 'BIOS' screen before OS gets loaded. I had to rescue system again... Below is copy of my grub.conf file. I am fairly new to LINUX (couple of years of experience), mostly development and basic config... nothing crazy. # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_obalyuk-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=2 timeout=0 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.34.6-54.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-54.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-54.fc13.i686.PAE.img title Fedora (2.6.34.6-47.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-47.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-47.fc13.i686.PAE.img title Fedora (2.6.33.8-149.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.33.8-149.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.33.8-149.fc13.i686.PAE.img I like my system to be up to date... Let me know if I can post any other files that can be of help. Has anyone else had this problem? Does anyone has any ideas how to fix this problem? p.s. Anything helps, you ppl are great! thx for ur time.

  Read the article

• Further Performance Tuning on Medium SharePoint Farm?

  - by elorg

  I figured I would post this here, since it may be related more to the server configuration than the SharePoint configuration or a combination of both? I'm open for ideas to try, or even feedback on things that maybe have been configured incorrectly as far as performance is concerned. We have a medium MOSS 2007 install prepped and ready for receiving the WSS 2003 data to upgrade. The environment was originally architected by a previous coworker, and I have since added a few configuration modifications to assist with performance before we finally performed the install. When testing the new site collections & SharePoint install (no actual data yet), things seemed a bit slow. I had assumed that it was because I was accessing it remotely. Apparently the client is still experiencing this and it is unacceptably slow. 1 SQL Server running SQL Server 2008 2x SharePoint WFEs - hosting queries (no index) 1x SharePoint Index - hosting index (no queries) MOSS 2007 installed and patched up through December '09 on WFEs & Index All 4 servers are VMs, should have more than sufficient disk space & RAM (don't recall at the moment), and are running Windows Server 2008 - everything is 64-bit. The WFEs have Windows NLB configured, with a DNS name & IP for the NLB cluster. Single NIC on each server (virtual, since VMWare). The Index server is configured as a WFE (outside of the NLB cluster) so that it can index itself and replicate the indexes to the WFEs that will serve the queries. Everything is configured & working properly - it just takes a minute or two to load a page on the local LAN. The client is still using their old portal (we haven't started the migration/upgrade just yet) so there's virtually no data or users. We need to either further tune the configuration, or fix anything that may have been configured incorrectly which is causing this slowness? I've already reviewed & taken into account everything that I could find that was relevant before we even started the install. Does anyone have ideas or pointers? Perhaps there's something that I've missed?

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Splunk is fantastically expensive: What are the alternatives? [closed]

  - by samsmith

  Possible Duplicate: Alternatives to Splunk? This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts! UPDATE: We spent two weeks researching commercial and open source options. Our conclusion: Write our own (we are a software company... we know how to write things). We built a great system built on mongodb and .NET that gives us the functions we needed from MongoDB in about one engineering week. We have now completed our implementation. We use two Mongodb servers (master and slave), and are able to log and index any amount of log data (5gb/day, 15gb/day, etc), limited only by disk space. OBSERVATIONS: This space needs a solid solution that is $1000-3000 flat rate. The licensing models used by the commercial firms are based on a "milk the data center ops guys" models. That is their right (of course!), but it leaves a HUGE space open for someone to come in underneath them. My guess is that in another year or two there will be a good open source solution that will be really usable. Thank you all for your input (even if it was self promotion).

  Read the article

• High I/O latency with software RAID, LUKS encrypted and LVM partitioned KVM setup

  - by aef

  I found out a performance problems with a Mumble server, which I described in a previous question are caused by an I/O latency problem of unknown origin. As I have no idea what is causing this and how to further debug it, I'm asking for your ideas on the topic. I'm running a Hetzner EX4S root server as KVM hypervisor. The server is running Debian Wheezy Beta 4 and KVM virtualisation is utilized through LibVirt. The server has two different 3TB hard drives as one of the hard drives was replaced after S.M.A.R.T. errors were reported. The first hard disk is a Seagate Barracuda XT ST33000651AS (512 bytes logical, 4096 bytes physical sector size), the other one a Seagate Barracuda 7200.14 (AF) ST3000DM001-9YN166 (512 bytes logical and physical sector size). There are two Linux software RAID1 devices. One for the unencrypted boot partition and one as container for the encrypted rest, using both hard drives. Inside the latter RAID device lies an AES encrypted LUKS container. Inside the LUKS container there is a LVM physical volume. The hypervisor's VFS is split on three logical volumes on the described LVM physical volume: one for /, one for /home and one for swap. Here is a diagram of the block device configuration stack: sda (Physical HDD) - md0 (RAID1) - md1 (RAID1) sdb (Physical HDD) - md0 (RAID1) - md1 (RAID1) md0 (Boot RAID) - ext4 (/boot) md1 (Data RAID) - LUKS container - LVM Physical volume - LVM volume hypervisor-root - LVM volume hypervisor-home - LVM volume hypervisor-swap - … (Virtual machine volumes) The guest systems (virtual machines) are mostly running Debian Wheezy Beta 4 too. We have one additional Ubuntu Precise instance. They get their block devices from the LVM physical volume, too. The volumes are accessed through Virtio drivers in native writethrough mode. The IO scheduler (elevator) on both the hypervisor and the guest system is set to deadline instead of the default cfs as that happened to be the most performant setup according to our bonnie++ test series. The I/O latency problem is experienced not only inside the guest systems but is also affecting services running on the hypervisor system itself. The setup seems complex, but I'm sure that not the basic structure causes the latency problems, as my previous server ran four years with almost the same basic setup, without any of the performance problems. On the old setup the following things were different: Debian Lenny was the OS for both hypervisor and almost all guests Xen software virtualisation (therefore no Virtio, also) no LibVirt management Different hard drives, each 1.5TB in size (one of them was a Seagate Barracuda 7200.11 ST31500341AS, the other one I can't tell anymore) We had no IPv6 connectivity Neither in the hypervisor nor in guests we had noticable I/O latency problems According the the datasheets, the current hard drives and the one of the old machine have an average latency of 4.12ms.

  Read the article

• Custom built machine has much higher power consumption than expected

  - by foraidt

  I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

  Read the article

• Kernel upgrade CentOS 5.3 mount: could not find filesystem '/dev/root'

  - by matt

  We have a CentOS 5.3 x64 server that by default runs kernel version 2.6.18-164.11.1 and we are attempting to upgrade the box to 2.6.31.12 The drive is LVM +ext3, and the problem I'm having is when I upgrade the kernel and attempt to boot from it, no matter what version of the kernel I use, I get /dev/root not found towards the end of the boot process, and the kernel panics, and than reboots. I'm installing the kernel exactly as it says in this doc. I've tried it "The centOS way " using make rpm and than installing that. I've updated my mkinitrd. The most interesting part of this problem is that it has been so frustrating that I decided to try and clean install centos on an identical machine without LVM, and the result is EXACTLY the same. After upgrading the kernel, I get /dev/root not found. Does anyone know how to fix this, or what information would be relevant to remedy it? I'm open to try anything at this point. One more interesting thing about this problem is that in the new version of the kernel, during boot it complains that dm-mapper is started twice, than panics right after that. I've tried this with other kernel versions, and the result is the same. What am I missing here? If you need any more files, please just ask. Linux cg 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.31.12-rt20) //NOT WORKING!!!! root (hd0,0) kernel /vmlinuz-2.6.31.12-rt20 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.31.12-rt20.img title CentOS (2.6.18-164.11.1.el5) //WORKING!! root (hd0,0) kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.18-164.11.1.el5.img

  Read the article

• Intermittent Disconnection of Client Computers from Domain Server

  - by dilip nagle

  The Background: I have Windows 2008 server Enterprise Version with 25 user cal licences. It has a domain and all users and a network shared HP printer in it. The Server has two network cards and both these cards as well as all client machines are on IP addressing scheme of 192.168.1.* with subnetmask 255.255.255.0. Of the two network cards viz. 192.168.1.231 and 192.168.1.233, only 192.168.1.231 is registered with DNS. In 192.168.1.233(i.e. 2nd network card) has default getway as 192.168.1.231 and dns address as 192.168.1.231. The Server has three hard disks with capacities as 500gb, 500gb and 1TB and are partitioned as (C,D,E), (F,G) and (K) with partition K having all user data into various Shared Folders. Each of these folders(On Partition K), are mapped onto each user's computer as per the right of access given to them. The Problem: The Server was installed about 6 months ago and till date not even once, the Server has Hung or has given any problem. All the Clients computers are able to run the web based software from their computers via ip address, e.g. http://192.168.1.231/webERP/default.aspx. However, occassionally, when any client computer tries to browse network mappings, it hangs. Again, there is no fixed pattern. This may happen after running smoothly for say 3 days. On each Client's machine, the network settings are as follows: IP Address: 192.168.1.* where * is 1,2,3 .... Sunnetmask: 255.255.255.0 defauly getway: 192.168.1.231 Which is a server card and DNS address. preferred DNS Server: 192.168.1.231 In Advanced Tab under Wins: LMHostLookup is Unticked and default is radio buttoned. Ideally, I would have loved to have Disabled NETBIOS over TCP/IP but some network printers do not get accessed if this option is enabled(ie. Radio Buttoned). Bacause Disabling Netbios will drastically reduce traffic of NETBIOS broadcasting to all the computers on the net to do naming resolution. On Server, I have WINs Running which I have Scavanged Records, verified Database Integrity etc, removed Tombstoned Records etc. The Critical Errors shown only once a day when the server is statred are 4224(WINS) and 12923 - Server Licencing failed to Update DNS Record. I fail to understand as why do client machines HANG when they try to browse mapped network shared folders on K Drive. Kindly Advice

  Read the article

• Looking for a Software to harden Windows machines

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So IF anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• Hibernating and booting into another OS: will my filesystems be corrupted?

  - by Ryan Thompson

  Suppose I have Windows and Linux installed on the same computer. If I hibernate Windows, can I boot into Linux without corrupting the Windows filesystem when I resume Windows? What about the other way around? What if I hibernate one, boot into the other, and mount the hibernated filesystem read/write? Read-only? If this is unsafe, is there any way to detect the hibernated state of the other OS and prevent mounting its filesystem? Basically, how far can I push this before it breaks, and how dangerous is it near the edge? I think I know the answers to some of the above questions, but for other ones, I have no idea, and for obvious reasons I have not tested this on my own computer. If someone has tested these, please enlighten the rest of us. I'm not necessarily looking for a specific answer to every question; I'll accept any response that answers a reasonable portion. EDIT: Let me clarify that when I say "hibernate," I mean the process of writing the contents of RAM to the hard disk and completely powering down the computer. In this state, powering the computer back on brings you through the BIOS and bootloader again, and you could theoretically select another operating system on a multi-boot system. Anyway, on with the original question: RESULTS Ok, after everyone's assurances that this would work, I tested it for myself. I set up Ubuntu to remount all ntfs filesystems and external drives read-only before hibernating. There was no need for a similar Windows setup because Windows does not read Linux filesystems. Then, I tried alternately hibernating one operating system and resuming the other, back and forth a few times. I even tried mounting the Windows filesystem from Ubuntu read-write, and creating a few files. Windows didn't complain when I resumed. So, in conclusion, you can more or less freely hibernate in a dual-boot Windows/Linux scenario. Note that I did not test a dual Linux/Linux co-hibernation situation. If you have two or more Linux installs and you hibernate one of them, you might be able to corrupt the filesystem by mounting it from another.

  Read the article

• Adobe Reader not loading form content

  - by wullxz

  We have an FDL file which is used to offer an online application possibility. The FDL is filled out and sent to a mailbox. When I open the received file, Adobe Reader starts, loads the document in Internet Explorer (had to change my default browser because it doesn't work in chrome - the customer uses IE as default) and displays a warning that Adobe Reader has blocked the connection to the server where the initial document is saved: I can then click on "Trust this document once" (translated by me!) or "Add this host to trusted hosts" (also translated by me!). The second option doesn't work at all. The first option works but is a little bit annoying. I looked into Adobe Readers options (Edit - "Voreinstellungen" in german / the last option - Security (advanced)) and found the possibility to add hosts, files and directories or allow Adobe Reader to use the "Trusted Websites" list from Internetoptions. When I add the website either to Trusted Websites or the trusted list in Adobe Readers options, the warning doesn't pop up but the content in the prefilled (by the applicant) input boxes of the document doesn't show up on Windows 7 but it does show up on Windows XP. This Screenshot shows the settings window described in the last paragraph. The big input box at the bottom normally holds the trusted files/directories/hosts list. System Information: Windows 7 Enterprise x64 Adobe Reader X multiple IE versions (mine is latest but there's also IE 7 or 8) How do I get Adobe Reader to load the content of the form? This behaviour can be reproduced on a PC. When opening an fdf from a command line the form fields are blank even though there is data in the fdf and the pdf is located in a mnaully entered trsuted folder. Steps to reproduce: Clean install a Windows 7 PC (or use a virtual box) Map a network drive to a shared folder with a subfolder e.g. c:\test\docs becomes m:\docs Set security permissions to allow full control to everyone Add an fdf and a matching pdf file in the subfolder Manually add m:\docs to each of the trusted folders in the trust manager registry settings Ensure that Enhanced Security is on Run a command line to open the fdf file Expected result: pdf is opened in Adobe Reader with form fields filled out with data Actual results: pdf is opened with blank fields 'Yellow bar' appears asking to add document to trusted locations It appears that Adobe Reader XI is ignoring the privileged locations entries in the registry. Adding the document via the 'yellow bar' adds the individual document, with the same folder, to the privileged locations but means that the process has to be repeated for every document that needs to be opened from the folder.

  Read the article

• File Not Found error launching Guest OS in a non-administrator user account

  - by ToreTrygg

  Hi, I am running Fusion 2.0.6 (196839) on an iMac running 10.6.2 with 3 user accounts (1 Administrator). I have Fusion set up to share the Guest OS, and it's been working splendidly for nearly a year. Within the Guest OS (Windows XP PRO), there are also 3 user accounts (1 Administrator). Last night I went to back up my VM to an external drive, and to minimize the file size and transfer time, I deleted all Snapshots but the most-recent one. I then backed up the VM externally (28.23 GB). Today, one of my users tried to launch the Guest OS from within her user account, and received the following error message: "File Not Found: Windows XP Pro-000006.vmdk "This file is required to power on this virtual machine. If this file was moved, please provide its new location." My two choices are Cancel and Browse. When I browse, I can locate the Windows XP Pro-000006.vmdk file, which appears to be contained within the VM file (Windows XP Pro.vmwarevm). However, it still won't launch from a non-Admin user account. If I view the package contents of the VM file from the user account, the above file is present and appears to be created upon each launch of the Guest OS. If I go back to my Administrator account on the Mac and then launch Fusion, the Guest OS works perfectly for all 3 user accounts within XP Pro. I have tried to delete the Guest OS from Fusion's Library within the problem user account, then re-connect it to that Library, but the result is the same. The Guest OS data integrity is 100% -- but is accessible only from the OS X Administrator account. This problem only surfaced after deleting several older Snapshots. Again, the data is there, the Guest OS powers up normally in the Mac's Administrator account, but persistently returns the above error when attempting to power on from a non-Admin account on the Mac. I'm not sure how this is affecting the error, but when I look at Hard Disk Settings, the "unable-to-locate" file is the filename of the virtual HD. I don't want to make any changes to my (working) VM without any advice from the knowledgeable people on this forum. Any help will be greatly appreciated, thanks!

  Read the article

• Trouble with Debian Lenny and Sphinx

  - by Ando

  I've very basic understanding of linux systems, but I've a server which was setup a while ago to host some web apps. Recently I decided to test out and implement Sphinx but unfortunately I cant get the install to work. I'm running a Debian Lenny distro and when I try to install sphinx it says - checking MySQL include files... configure: error: missing include files. ****************************************************************************** ERROR: cannot find MySQL include files. Check that you do have MySQL include files installed. The package name is typically 'mysql-devel'. If include files are installed on your system, but you are still getting this message, you should do one of the following: 1) either specify includes location explicitly, using --with-mysql-includes; 2) or specify MySQL installation root location explicitly, using --with-mysql; 3) or make sure that the path to 'mysql_config' program is listed in your PATH environment variable. To disable MySQL support, use --without-mysql option. ****************************************************************************** I do have mysql 5.1 installed but I can't find the include files, AND one more thing.. I read around the net that I probably need libmysqlclient15-dev but when I try to install that using apt-get i receive the following error. The following packages were automatically installed and are no longer required: libxcb-aux0 libts-0.0-0 libxcb-atom1 ttf-dejavu-extra hunspell-en-us g++-4.3 libmysql++3 libnspr4-0d libdirectfb-1.0-0 libxcb-event1 libasound2 libstdc++6-4.3-dev libhunspell-1.2-0 ttf-dejavu libmozjs2d conkeror-spawn-process-helper libnss3-1d Use 'apt-get autoremove' to remove them. The following NEW packages will be installed: libmysqlclient15-dev 0 upgraded, 1 newly installed, 0 to remove and 276 not upgraded. Need to get 7590 kB of archives. After this operation, 26.3 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmysqlclient15-dev Install these packages without verification [y/N]? Y Err http://ftp.us.debian.org/debian/ lenny/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 35.9.37.225 80] Err http://security.debian.org/ lenny/updates/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 149.20.20.6 80] Failed to fetch http://security.debian.org/pool/updates/main/m/mysql-dfsg-5.0/libmysqlclient15-dev_5.0.51a-24+lenny5_amd64.deb 404 Not Found [IP: 149.20.20.6 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Can you help me out by suggesting how to install the required packages and run the Sphinx.

  Read the article

• How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

  - by SiegeX

  A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

  Read the article

• How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

  - by SiegeX

  A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

  Read the article

• Different files on shared partition?

  - by Matt Robertson

  I am dual-booting Windows 8 and Ubuntu 12.04. My partition scheme looks like this: /dev/sda1 - Windows 8 (nfts) /dev/sda2 - Ubuntu / (ext4) /dev/sda3 - Ubuntu home (ext4) /dev/sda5 - swap /dev/sda6 - Shared data partition (exfat) (First off, yes I do have exfat libraries installed on Ubuntu) I created some PNG images in Windows and saved them on my shared partition. From Ubuntu, I edited the images in GIMP and saved them (replacing the ones on the shared partition). When I boot into Windows, the files appear unchanged - exactly like they did before I edited them from Ubuntu. I even added a folder and deleted some other files, but none of these changes exist in Windows. When I boot into Ubuntu, all of the changes are still there. It is as if Windows is caching the old file structure... How is this possible? Thanks in advance. Edit -- commands output ~~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 165.1G 0 part +-sda2 8:2 0 21.3G 0 part / +-sda3 8:3 0 98.9G 0 part /home +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 7.8G 0 part [SWAP] +-sda6 8:6 0 172.7G 0 part /mnt/shared_data ~~ /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # /dev/sda2 UUID=8f700f65-b5c7-4afc-a6fb-8f9271e0fb5e / ext4 errors=remount-ro 0 1 # /dev/sda3 UUID=f0d688b7-22bd-4fa7-bc1b-a594af2933fa /home ext4 defaults 0 2 # /dev/sda5 UUID=3bc2399b-5deb-4f04-924b-d4fc77491997 none swap sw 0 0 # /dev/sda6 UUID=F2DE-BC47 /mnt/shared_data exfat defaults 0 3 ~~ /etc/mtab /dev/sda2 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /home ext4 rw 0 0 /dev/sda6 /mnt/shared_data fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matt/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matt 0 0

  Read the article

• How to enable caching on Apache / Ubuntu Linux?

  - by Jim Mischel

  I have a large (several megabytes) XML file that's updated rather frequently (every 10 minutes or less) and gets a lot of traffic. I'd like to implement some caching to reduce bandwidth and server load. Looking at the Apache documents, I see a dizzying array of configuration options that involve various combinations of mod_expires, mod_headers, and mod_cache (and variants). I end up running in circles and the results aren't what I expect. I'm comfortable editing the various configuration files if I have some idea what I'm supposed to change. But at the moment I'm poking around in the dark and that's never a comfortable feeling. So, perhaps if I describe what I want, somebody here can take me by the hand and say, "This is what you need to do." Periodically, this file, call it "stuff.xml" is updated and a new version copied to the directory. The external url would be, for example, http://example.com/stuff.xml. Understand, this part works. Whenever I request the file, I get the expected result. But the file is big and I want to save bandwidth, so first I'd like to implement conditional GET semantics with the If-Modified-Since header. How do I do this? I've enabled mod_headers and mod_expired and added the <FilesMatching> section in my httpd.conf as recommended in countless examples I've seen online, but that didn't change the behavior when made a conditional GET request. I always get a status 200 with the entire document. So how the heck do I implement this? That'll cut down on neeless transfers. I'd also like to limit the amount of data transferred. Seeing as this is XML, gzipping it should save me 50% or more. My next step would be to somehow gzip the file and, if it's not too difficult, store it in memory. That'll cut down on per-access data transfer, and also reduce disk transfers. So how do I implement this type of caching? Thanks in advance.

  Read the article

• Why is the server performance so poor? What can be done to improve the speed of the server?

  - by fslsyed

  Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

  Read the article

• Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

  - by user26453

  I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

  Read the article

• Rsync: windows 7, synology: login error and permission denied error

  - by loonboon

  Good day to all of you all, I'm running into strange/stupid errors, and I hope anybody would be so kind to help me out. I have to admit, I am by no means a guru, so please bear with me :-) Situation: -Synology NAS (runs Linux), and Windows 7 desktop (1 normal/restricted user Lisa and 1 admin user). - Data from W7 desktop to be rsynced to synology: /volume1/home/Lisa/Backup - Rsync command: c:\cygwin\bin\rsync -avz /cygdrive/e/Lisa/ [email protected]:/volume1/homes/Lisa/Backup - I've set up ssh per these two threads: a. http://www.cesareriva.com/archives/102 b. http://www.cesareriva.com/archives/112 Now the horrors begin: - root is allowed to run the rsync succesfully, however, he doesn't login automatically (so I can not use rsync in W7 batchscripts, which is of course required). - Lisa is allowed to login automatically but he can not succesfully finish the rsync command because of permission errors: rsync change dir /volume1/homes/Lisa/Backup failed: permissions denied. This happens for each and every file and subdir rsync tries to create. However, the main directory (Backup) is created. When I try to copy files from windows explorer to the directory 'Backup' using the very same user Lisa everything goes smoothly. So, obviously, there is a permission problem somewhere; either my rsync-command isn't correct, or the folder permissions for homes/Lisa aren't correct (but, then again, Windows 7 copies files to that folder without any problems, so that does make me believe the homes/Lisa-permissions don't appear to be the problem). I also tried adding: --chmod=Dugo+x --chmod=ugo+r which I found somewhere on the web, to the rsync-command, but this didn't solve any problem and gave the exact errors. Would anybody please please help me on how to fix this? I am utterly frustrated about this, because I have been trying for 1 month to get everything to work and it simply doesn't work. I bought the big Synology to end the horrors of 20 external USB-disks for once and for all (we have many pictures and home vids of our deceased dogs and want to watch these, the horrors being 'what material is on what disk'). I'll gladly return the favour of somebody helping me out by buying you a nice beer (paypal), if you could end my misery. I am not extremely skilled on Linux (not at all :-( ) so if you could give an extra word when possible so I understand what to do, I'd be very grateful. I really hope somebody can help me out, Thank you in advance, Lisa

  Read the article

< Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >