Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 65/311 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • What is the largest flatscreen monitor available for PC use?

    - by Avery Payne
    I'll qualify this specifically (by order of preference): must have the highest diagonal measurement, widescreen or "normal" aspect ratio doesn't matter here, just the diagonal. must have the highest resolution available, which means 72 inches of 1280x1024 won't cut it. must not have a TV tuner built into it, I'm not looking for a TV set, this is a monitor! must be available at a retail outlet that caters to the general public, i.e. Best Buy, Sears, Costco (all of these examples are in the U.S., although you can suggest something from whatever chain is in your area/nation/geography). Non-retail or non-physical venues like eBay, or businesses that only cater to other businesses, do not qualify under this requirement. I should be able to walk into this place and purchase it, not just whip up an order online. If you are unsure about this requirement, just ask yourself: can I physically see it before I open my wallet and purchase it?

    Read the article

  • Windows Mobile 7 corporate device...

    - by Toymaker
    Does anyone know of a Windows Mobile 7 device aimed at business use? I’m looking for something with bar code scanning capability. Psion, hand held, and honeywell only offer 6.5 at the moment. Granted, Windows Mobile 7 just barely came out and these sorts of devices usually lag a bit behind consumer toys...but hopefully someone can help.

    Read the article

  • Starting old computer - nothing shown on screen at boot

    - by Jonas
    I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

    Read the article

  • USB Drive cannot detect in Windows 7

    - by Perdana Putra
    Have you ever plugged in a USB drive or any external device with a hard drive and wondered why you cannot see it in My Computer? I often have, I believe my USB is not broke .. because if I plugin the USB to another computer could be seen / detected. I tried following this tutorial http://www.howtogeek.com/howto/22251/find-your-missing-usb-drive-in-windows-7-vista/ but I am afraid of going wrong, and caused my data is lost. is there any easy way around this problem? many thank's for your attentions Guys ..

    Read the article

  • Can a UPS give off an EM field capable of interfering with desktop components?

    - by Magsol
    I own an APC Back-UPS ES 750; it's about 4 years old, and is the only major component remaining in a question that has been boggling me for the last 18 months. (Yep, I originally posted this question about the possessed desktop, and while I marked a solution and closed the question, a week later the same problem returned) I've tried plugging the desktop straight into the wall (but left the other components plugged into the UPS) and the desktop still froze. Is it possible that the EM field generated by the UPS is interfering with my desktop components and causing these otherwise-unpredictable system freezes? To me this sounds like a long shot, but aside from my twin LCD monitors, that just about takes care of all the major components.

    Read the article

  • How to redirect sound to USB headset when plugged in?

    - by LM
    I often have to switch between audio output from my speakers and my headset (P5Q mobo with integrated sound and Microsoft headset). I've already got it so that when my headset is plugged in, sound will be played through it, and if it isn't, sound will play through my speakers. The problem is that if I have a game or similar program started while my headset is plugged in, if I unplug it, I will get no sound. Also, if I start the program with no headset, and plug it in, I get sound still through speakers. Is there any way to do this?

    Read the article

  • Is there way to enable 4 GB RAM in 32-bit Windows OS?

    - by Wahid Bitar
    I upgraded my PC to 4 GB RAM and I get only 3 GB. Windows 7 32-Bit consider that I've 4 GB RAM but didn't use more than 3 GB. Someone told me that MS Windows 32-bit doesn't support RAM larger than 3 GB. So please is there any way to make my OS "Windows 7 32-Bit" support more than 3 GB RAM ? *`Note: I can't move to 64-bit because I've many program doesn't work with a 64-bit OS. Edit:: I tried what Mr. Wonsungi advised me but whenever I check this option: Enable support for 4 GB of RAM I get the following error: 'Cannot access to the registry key HKEY_CLASSES_ROOT\CLSID\{E88DCCE0-11d1-A9F0-00AA0060FA31}.' There is no "CLSID" in my registry, I don't know why!.

    Read the article

  • PC powers up but there is no display

    - by Matthew
    I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

    Read the article

  • Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

    - by raldi
    I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

    Read the article

  • Windows Server 2008 R2 Maximum Processor Limit Confusion

    - by Stevoni
    As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

    Read the article

  • unstable / variating sound level (volume) within same song / clip

    - by Bastien
    Hello, I have a pretty standard Acer desktop (I guess a predecessor of the X5900 model). when playing mp3 / radio / youtube clips, the sound level is changing WITHIN the clip, highly annoying. in the case of an mp3, the same mp3 will play at a constant sound level on my iPod, so clearly an issue with the computer. problem existed under vista, I upgraded to windows 7 and have the same issue. I guess it might be soundcard-related, so updated the drivers, no luck neither. any idea ? thanks

    Read the article

  • Upgrade no raid server to raid

    - by AZee
    I have just learned that our PDC has a single drive with 2 partitions. I also know that this drive has bad blocks as recorded in the event log. What I would like to do is to convert this to a RAID solution with a nice balance between economy and performance. I will admit that I have only configured servers with RAID from scratch, and have no experience upgrading an existing system into a RAID system. In fact, I'm not sure it is even possible. Since this is the PDC for 350+ workstations downtime is important. I'd like to hear from other System Administators how they would tackle this and their recommendations for all devices. At this time it seems to me that I can replace the existing drive and then restore from backup or install a controller, drives, configure the RAID an basically start from scratch. Thank you for taking your time. ~AZee

    Read the article

  • Proper way to connect SATA and IDE Hard drives together?

    - by Bartek
    I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

    Read the article

  • Microsoft Wireless Keyboard 3000 v2.0 not working, but paired Wireless Mouse 5000 on same receiver does?

    - by John Straka
    I have a Microsoft Wireless Keyboard 3000 v2.0 that was bought paired with a Microsoft Wireless Mouse 5000. They're both Bluetooth and use the same receiver. The keyboard no longer works. The receiver is fine, as the mouse still works. The keyboard is still detected by Windows when the receiver is plugged in. The batteries have been replaced. There are no on/off switches on the keyboard or mouse, and no re-sync button on them or the receiver. Results are the same when using the receiver in a different USB port, or on a different machine. Anything else I might try to fix this, or should I hold a funeral for the keyboard?

    Read the article

  • How long until the chirping stops or what can I do to make it stop?

    - by MadBurn
    I know computers, I have been fixing them and building them for over a decade... but I don't know the exact electronics of them. My personal desktop PC is making an irregular, but constant, extremely high pitched chirping noise. I know this could be my hard drive, but I've heard that noise before and I believe this is a capacitor or part of the electronics. This noise is right at the edge of my hearing and I can feel it more than I can hear it. After a while, it starts to give me a headache and makes me physically sick. How long will this last? Is there anything I can do to fix it (short of replacing the entire motherboard)?

    Read the article

  • sata2 hdd not reported correctly on gigabyte mobo

    - by hyperboreean
    hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

    Read the article

  • What GTX 285 should I choose?

    - by Thomaschaaf
    I'm trying to buy a graphics card and the GTX 285 models seem to be in the right pricerange. A friend of mine suggested me the ZOTAC GeForce GTX 285 over the XFX Black Editon. Which card maker and edition would you choose? Is the AMP! a good decision for the ZOTAC?

    Read the article

  • Where can I find this HP modular keyboard or similar?

    - by Chaos Whistler
    I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

    Read the article

  • I think my laptop just died

    - by Joel Coehoorn
    I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

    Read the article

  • Transporting servers - need special rack/case

    - by Nso
    I am responsible for our companys server infrastructure at trade shows. We have 2 annual shows, 1 in Las Vegas and 1 in Amsterdam, so obviously our servers do quite a bit of travelling. Quite often, it gets home with pieces falling off, and insurance/rebuilding takes ages and cost a lot of money. For now I have been using a wooden rack-box, with steel-reinforced sides/corners, but I am looking for something tougher. Does anyone have experience with sending servers all around the world, without them dieing all the time?

    Read the article

  • MacBook battery MA681LL/A or MA348G/A.

    - by alexarsh
    I need to buy A1175 battery for my macbook 15''. Which one should I buy: MA681LL/A or MA348G/A? Which one is better? I remember it was an issue with A1175 batteries. And then apple replaced the batteries that hold about year or two to another batteries that hold about 4 years. I just don't remember which is which.

    Read the article

  • USB port causing device problems after new motherboard upgrade

    - by enbuyukfener
    I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • What's the most durable netbook

    - by Keyslinger
    I'm about to spend more than two years in Latin America and I know from experience that not all computer equipment can handle the shifts temperature, air moisture, and other atmospheric variables as well as the generally greater number of shocks and jostles presented by developing-world transportation and unstable infrastructure/power grid. Is there any particular manufacturer, brand, or model of netbook or notebook that stands above the rest in terms of durability and ability to survive in harsh environments?

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >