Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 65/370 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Printing Problem on Shared Printer

  - by paulus_almighty

  I'm using Ubuntu 11.10 on two machines. One has a USB printer connected. I want to share this printer with the other over the wireless network. Under Printing > Server > Settings: I have Publish shared printers connected to this system and Allow printing from the internet enabled. All other checkboxes are disabled. When I right click on the printer icon, I can see enabled and shared are ticked. On my other machine, I can now click on add network printer. It finds the machine name of the server and correctly identifies the printer. However, print test page fails. Under printer properties the printer state says: Processing - Unable to connect to printer; will retry in 30 seconds... What's gone wrong?

  Read the article

• Driver for asus wireless PC card WL-100GE

  - by emab

  I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• How can an application (like Firefox) be forced to use a certain network interface?

  - by Lekensteyn

  I've two interfaces: eth0 and wlan0 on a notebook. Possible use cases: eth0 grants me Internet access, and wlan0 is currently connected to a router which does not have Internet-connectivity. For development purposes, I need to connect to the wlan0 by default, but use eth0 for surfing eth0 and wlan0 are both connected to the Internet. For a torrent application, eth0 should be used for speed, but for portability of the notebook, SSH should have a connection over wlan0 eth0 is a wire connection, wlan0 is a wireless one. Sensible data should be transferred over eth0, but other traffic can go over wlan0 as well. Is there a way to force applications (like nc.traditional or firefox) to use a certain network interface? A wrapper like example-wrapper eth0 program is fine too if such program exist. It would be nice if it could configured within Firefox (in runtime). I'd like to avoid IPTables solutions if possible.

  Read the article

• Network print to brother MFC-7420

  - by trampster

  I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

  Read the article

• How to make ip Address static (eth0)

  - by Jordan Angelucci

  I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

  Read the article

• How do I set up a server for SSH?

  - by Rob S.

  At my workplace (a university) we have two Ubuntu servers. One is a teacher server and the other is a student server. I am currently setting up a new server to replace the existing teacher server. The new server is currently online and I am trying to get it setup so I can SSH into it from my home. Right now, I can SSH into the existing teacher or student server and then SSH into the new server. However, I can not SSH directly into the new server. What must I do so that I can SSH directly into the new server? Thank you very much in advance for your time.

  Read the article

• Can't connect to windows 7 ad-hoc network

  - by Nikolaj

  Good day! I have installed ubuntu 12.04 on my laptop and I need to have network connection on it. Have a desktop PC, where I've created ad-hoc wi-fi network(Windows 7) and can't connect to it. So, problem: I see my network in the list of networks to connect, but I cant connect to it because it's grey color and not active(can't click on it). Could somebody help me to solve that problem? Thanks in advance!

  Read the article

• Adding a 'network' USB printer

  - by AndrewK

  I have a HP Deskjet 1050a printer, hence the 'network' in the title. Its a bog standard USB home printer. I have it attached to my router (has a USB port in it). I have got it connected and working to with Win8 PC and also a MacBook Air. Can't seem to get it to add as a printer to my Xubuntu laptop(s). It doesn't get detected automatically (not an actual network printer) and i've tried multiple options to get it working. It seems to add it but when printing a test page its saying the printer isn't connected. Ping works fine so it can see it, just can't add it as a printer. With Win8 I had to create a port with the IP of the printer (192.168.1.253 in this case), is there an Ubuntu alternative to do this?

  Read the article

• LAN or workgroup with Ubuntu server and windows clients

  - by Kenneth Fernando

  I have 35 windows7 standalone computers right now and planning to setup a LAN/workgroup using ubuntu as a server if its a LAN. Purpose for network.. Files from client computers to be accessed by me and vice versa through a shared folder on the server. Files only include word documents and very small project files. The network wont have Internet at the moment. What I would like to know.. How would i configure the ubuntu server to recognize the clients and will the clients be able to view the shared folders through their windows machines simultaneously? Would appreciate feedback. Thanks

  Read the article

• Proxy authentication box not showing (sometimes)

  - by zerologiko

  I'm behind a proxy that require authentication by means of user/pass. I'm using Ubuntu 11.04, I think the proxy is "Squid". Usually everything works fine, that means that the browser shows me the window to insert proxy user/pass and I can navigate. The problem: Sometimes the browser refuse to show the authentication windows and if I wait enough it gives me an error like: Errore 130 (net::ERR_PROXY_CONNECTION_FAILED) Even if I restart, disconnect, the situation doesn't change. BUT on Windows the network (and the proxy) works.. So, bottomline what I know is: the network is working (though only on Windows) the Ubuntu configuration is ok (because i can navigate most days) The problems resolves itself in a few hours but I don't understand why. Some hints? Thanks in advance! Andrea

  Read the article

• All my bandwidth eaten up - report included

  - by Mel

  I have my network bandwidth eaten up totally. Whenever I connect my network, without any application being opened it is always full. I have prepared report of iftop, nethogs and network system monitor. iftop and nethogs My host IP is 192.168.1.203 and all the rest are not known though I have tried to pin 192.168.1.105, it doesn't reply. If possible I would like to block the most disturbing IP which is 192.168.1.105 to block it. but don't know how.

  Read the article

• audio and video data in RTP

  - by Banana

  Suppose a user wants to transmit both audio and video to another user, whose formats are AMR for audio and H.264 for video. Does the user have to transmit audio and video packets always separately? Meaning that it is not possible to mix audio and video within the same RTP packed, is that correct? If this is true I guess the RTP protocol will need to know the SSRC of both audio and video to be able to check the sync of the two streams.

  Read the article

• Application to organize / manage installed networks

  - by vicmp3

  I was wondering if there is a Application where you can organize networks. I mean if you have installed some networks you have to note every pc's name, his ip-address and so on. Is there a Application where you can manage it? I saw the monitoring tools but that is not exactly what I'm looking for. Maybe I didnt explain me well, after all my englis his not so good :) For example if I install many different networks I write in a book how I configured them. I write pc-name ip-address ip-gateway ip-broadcast and so on for each network. It will be great if I can do it in a program to organize it well, and for example it gives me a node view of the network.

  Read the article

• how to map a network drive [duplicate]

  - by acquacheta

  This question already has an answer here: Correct way of mounting a Windows share 1 answer I hope someone can help me.. I'm trying to connect with my university remote filestore, but I can't make it work.. Here is explained what to do on Windows or Mac, and here I found a guide about how to do it with ubuntu, but it's not working to me (at the end of all the steps, I can't access to the mounted folder). I can access to the storage through Konqueror (I'm using KDE), but I would like to access to it also without it. Any suggestion?

  Read the article

• No Internet Connection - ubuntu 11.10

  - by emersonhsieh

  I installed Ubuntu 11.10 recently. After the first bootup the computer freezes so I have to force-quit my computer. Then I turned on my computer after that. I tried connecting to the internet. My (and my neighbor's) wireless networks shown up, but no matter how many times I tried, I can't connect to my home network. I checked the password and the other laptop's internet works (a MacBookPro). It was a wireless network. What's weird is that the Wireless network worked when I was installing ubuntu How can I connect to the internet now? I don't have a wired network. Please Help! Any help will be appreciated Specs: ASUS F81Se, Windows 7 Dual-boot, I remember the wireless card was made by Atheros, 4GB RAM

  Read the article

• Problems with No-IP redirecting

  - by user171156

  I am setting up a webserver on my ubuntu desktop 13.04, everything is working fine except; When trying to access the server through the external host using no-ip, it gives the original index created by apache on setup. While when I try to connect to the server via my real IP address from externally, it goes to the correct index. I have been trying to figure out what the issue is on this problem as nothing is working because of that bad redirect, I'm wondering if anyone of you could help me out, or advise me in the right path. Thank you very much! PS; If more info needed I'll provide, but this should explain it all.

  Read the article

• How to establish VPN Connection using Vodafone K3773 HSPA USB Stick?

  - by user1889139

  I am using Ubuntu 12.04 Desktop. I am trying to establish VPN PPTP connection to Ubuntu 12.04 Server. VPN connection available when PC is connected to LAN - ADSL modem - Internet - VPN Server. No VPN connection available when using 3G modem Vodafone K3773 HSPA USB Stick - Internet - VPN Server. Internet is connected. VPN is not. How to establish the VPN Connection? Server side log: GRE: Bad checksum from pppd.

  Read the article

• Bluetooth broadcasting realtime - is it possible

  - by user69961

  Is it possible to broadcast data via bluetooth to one ore more connected devices? I mean that each phone will be master and slave at the same time and each phone will broadcast data that should be received by all other phones. Or is the only possibility to use a "client-server"-like topology; one phone acts as a server and listens to all clients and then sends data from each client to the rest of clients in the network? Which variant should be more effective? If broadcasting is possible then the same implementation can be used for all devices and if one device will die communication between rest of network can continue. And also will there be enough to send one message per device - not message from each device to server and then back to all devices. Am I right?

  Read the article

• How often should multiplayer games communicate with the server?

  - by Bane

  I once heard that Runescape "ticks" every 0.3s, and that seemed like a very long period of time, although Runescape is kind of a slow game. I'm building a more dynamic top-down shooter game, and I'm wandering, how often should I communicate with the server? ASAP, or every 0.1s? How do shooter games usually do it? Both the server and the client are written in Javascript, node.js and socket.io are being used.

  Read the article

• 12.04 drops Wired Network if Wireless connects

  - by mitt10tim

  This is a little different then most of the questions I have seen here. When I am at my office I keep my Lenovo Thinkpad t61p running Ubuntu 12.04 x64 connected via wired Ethernet. I also typically leave the wireless radios on. After a recent update the behavior of laptop in regards to the networks has changed. It used to be that if the laptop had a wired connection, the wired would supersede the wireless. Now, when I get to work and plug the laptop in and power it up, it connects via wired (correct behavior), shortly after the wireless begins searching for its favorite network (also correct) but as soon as it finds a network to connect to, I lose Internet. If I disconnect from the wireless network, leaving the wireless radios powered on, and refresh the wired connection, all is well again. Powering down the wireless radios also corrects the problem. How can I set this up so that the wired network (if available) always has precedence over the wireless?

  Read the article

• Need a few reboots to connect to wireless

  - by Debajyoti Nandi

  I am running xubuntu 12.10 on my msi wind U100 netbook. I have a problem with the wireless connection. Whether the wireless connects automatically to a known wifi hotspot (both at home and starbucks) is temperamental. Sometimes I need to reboot one or more times to get it connected. Otherwise, it tries and keep asking me to enter the password (which is saved and when it works it does, so the problem is not with the password). Every time my computer awakes up from sleep the same problem. I have to do a reboot to connect to wireless. I searched everywhere but found no solution. I would greatly appreciate if someone has any solution. I will gladly share the hardware/software or config info, if asked, but I don't know exactly what to share and where to find them. Thanks you for any help.

  Read the article

• atheros ar8161 not recognized

  - by Paul

  Apparently I am not the only one with this problem. This was my solution, but it did not work, of course. I downloaded the tar from another computer. I found the file of the atheros driver that I needed which is apparently atl1c. I put that file on my ubuntu desktop. I ran the following in the terminal: cd ~/Desktop atl1c make sudo make install I am sure that some of you will find this code laughable, but isn't there a simple code I could use once I have the atl1c folder on the desktop?

  Read the article

• How can I use smbclient to connect to Windows shares by hostname when a firewall is enabled?

  - by skyblue

  I can't connect to file shares on Windows computers using smbclient -L //hostname when the firewall is enabled. This occurs whether I'm using ufw (which allows outgoing traffic and replies back in with the default configuration) or iptables (where I'm allowing outgoing traffic and replies back in with iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT). However, smbclient -L //ip-address works whether the firewall is enabled or not. I also tested this against a Samba server running on Ubuntu and again smbclient -L //hostname does not work when the firewall is enabled, but smbclient -L //ip-address works whether the firewall is enabled or not. For reference, here are the iptables rules I used during testing: *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -d 224.0.0.251/32 -p udp -m udp --dport 5353 -j ACCEPT COMMIT

  Read the article

• What data-structure/algorithm will allow me to send a list of key/value dictionaries using the least amount of bits?

  - by user12365

  I have server objects that have corresponding client objects. The data to be kept in sync is inside the server object's key/value dictionary. To keep the client objects in sync with the sever objects, I want the server to send the key/value dictionary every frame for each object. What data-structure/algorithm will allow me to send a list of key/value dictionaries using the least amount of bits? Bonus constraint 1: For each type of object, the values of some keys change more often than others. Bonus constraint 2: Memory usage on the server side is relatively expensive.

  Read the article

• Twitter "Authentication Error" Turpial & Choqok (latest versions)

  - by PineMarten

  I use Turpial a lot, but Turpial isn't connecting at all. I can still connect to Twitter thru the OS app (no issues signing in through Online Accounts) and of course I can still sign in using the browser, but Turpial gives me an "Authentication Error" and Choqok fails to do anything. I've tried changing my password, revoking the Turpial and Ubuntu apps in Twitter and re-enabling them, but then it gives me an "Invalid Credentials" message. I've even removed and installed Turpial multiple times, still nothing. I can't find any information or resources for this type of error from Turpial online. I think it may be something recent after finding this message elsewhere: (article related to "Birdie") It looks promising i'm currently using it atm, since all the other twitter clients no longer work due to the API 1.0 shutdown (posted today) I've never used Choqok before today, so I don't even know if I've set it up properly. It's failing to retrieve or send Tweets it just blank screens, but at least it signs in. I've figured that this isn't an issue with Ubuntu, or Turpial or Choqok, or the router (already replaced it today), so I don't really know what I'm dealing with here. I hope it's not another API issue, Facebook did something similar just a few weeks ago

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >