Search Results

Search found 41511 results on 1661 pages for 'via point'.

Page 65/1661 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Execute local script requiring arguments on Linux via plink

    - by c_maker
    Is it possible to execute (from windows) a local script with arguments on a remote linux system? Here's what I got: plink 1.2.3.4 -l root -pw mypassword -m hello.sh Is there a way to do this same thing, but able to give input parameters to hello.sh? I've tried many things, including: plink 1.2.3.4 -l root -pw mypassword -m hello.sh input1 input2 In this case it seems that plink thinks that input1 and input2 are its arguments.. which makes sense. What are my options?

    Read the article

  • Port knocking via SSH tunnels

    - by j0ker
    I have a server running in my university's internal network. There is only one SSH daemon running which is secured by port knocking with knockd. Works fine if I try to connect from within the internal network. But since the server has no external IP, I have to tunnel into the internal network every time I want to access the server from outside. And since tunneling only works for a single port I cannot do the port knocking as easily as from an internal client. In fact, I don't get it to work at all. What I'm trying is opening tunnels for all the different ports that have to be knocked. Then I send TCP-SYN packets into the tunnels. But that doesn't work even for a single port. If I establish the tunnel on the first port in the knock sequence and send a packet through it, it doesn't reach the server. There is no entry in the log file of knockd, while there should be something like 123.45.67.89: openSSH: Stage 1 (as shown with internal knocks). So I guess, the problem doesn't exist within my knocking script but is a more general one. Are there any known problems with what I'm trying to do? Is it even possible or am I missing something? Thanks in advance!

    Read the article

  • Very slow connection to xserve via afp or smb

    - by Mhoffman13
    Help. File transfer and connection speed to our Xserve are painfully slow from newly purchased iMacs. The Xserve is only used as a file server, its running 10.4.11. The problem seems to be only happening on brand new iMacs running 10.6.3. When connected either over afp or smb copying files is many times slower than usual. Other machines on the network running either 10.4 or 10.5 have a normal connection speed. To try to rule out OS incompatibility I connected the new iMac running 10.6 to another computer running 10.4 over the network. The file transfer speed was fast as normal. So it seems the problems lies with the X serve (maybe). The afp logs either access or error don't show anything unusual. One thing that did look different was when the imac was connected to the Xserve the user had its id listed as its IP address. The other machines connected, had the id of broadcasthost. I also noticed that when connected from the new iMac I can only see one of the mirrors. When any other computer connects both mirrors are shown. Tried a restart of the Xserve but the problem persists. Thanks in advance for any advice

    Read the article

  • Dnsmasq offering IP via DHCP, but nobody is accepting

    - by Matt
    As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

    Read the article

  • HTTPS/HTTP redirects via .htaccess

    - by Winston
    I have a somehow complicated problem I am trying to solve. I've used the following .htaccess directive to enable some sort of Pretty URLs, and that worked fine. For example, http://myurl.com/shop would be redirected to http://myurl.com/index.php/shop, and that was well working (note that stuff such as myurl.com/css/mycss.css) does not get redirected: RewriteEngine on RewriteCond ${REQUEST_URI} !^(index\.php$) RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^/?(.*)$ index.php/$1 [L] But now, as I have introduced SSL to my webpage, I want the following behaviour: I basically want the above behaviour for all pages except admin.php and login.php. Requests to those two pages should be redirected to the HTTPS part, whereas all other requests should be processed as specified above. I have come up with the following .htaccess, but it does not work. h*tps://myurl.com/shop does not get redirected to h*tp://myurl.com/index.php/shop, and h*tp://myurl.com/admin.php does not get redirected to h*tps://myurl.com/admin.php. RewriteEngine on RewriteCond %{HTTPS} on RewriteCond %{REQUEST_URI} !^(admin\.php$|login\.php$) RewriteRule ^(.*)$ http://%{HTTP_HOST}/${REQUEST_URI} [R=301,L] RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} ^(admin\.php$|login\.php$) RewriteRule ^(.*)$ https://myurl.com/%{REQUEST_URI} [R=301,L] RewriteCond %{REQUEST_URI} !^(index\.php$) RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^/?(.*)$ index.php/$1 [L] I know it has something to do with rules overwriting each other, but I am not sure since my knowledge of Apache is quite limited. How could I fix this apparently not that difficult problem, and how could I make my .htaccess more compact and elegant? Help is very much appreciated, thank you!

    Read the article

  • How can I open PowerShell via AutoHotkey?

    - by Ryan
    I'm running AutoHotkey 1.0.48.05 on Windows 7. I'd like CTRL-ALT-P to open PowerShell. This is what I have so far: ^!p:: Run %SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe Return This is the error I get: File C:\Users[username]\Documents\WindowsPowerShell\profile.ps1 cannot be loaded because the execution of scripts is disabled on this system. Please see "get-help about_signing" for more details. I've already set the execution policy to RemoteSigned by opening PowerShell ISE as Administrator and running Set-ExecutionPolicy RemoteSigned. (See http://technet.microsoft.com/en-us/library/ee176949.aspx) How can I get around this problem?

    Read the article

  • Server 2003 R2 - II6- granting access to website via IP with subnet range

    - by John
    We are trying to allow for a client to connect to our website. By default we are Denying all access except for those with the specified IPs we have configured to run, everything before has just been a single IP address. However now we must implement a range of IPs and rather than input thousands of records we want to use the group of computer options in the Grant Access page. However we have it configured to work off of the IP 72.21.192.0 with a subnet mask of 255.255.224.0 They are unable to connect. Looking over our IIS logs they are receiving a 302 error which is the same behavior anyone should get whom is unauthorized to view the page in question. The IP address coming in is 72.21.217.2, so it should be well within the rage of acceptable IP addresses. I'm at a loss as everything I look up tells me to do what we are doing. So any insight would be appreciated. Especially because I'm a software guy not hardware. Thanks!

    Read the article

  • How do I open a file with a program via a shortcut from the cmd prompt

    - by PassByReference0
    Here's my predicament: When I add a program's location to my PATH, I can do the following in cmd prompt to open a file in my current directory: notepad++ open_me.txt And this opens open_me.txt in notepad++. However, I don't want to have to add every single program I want to run to my path. What I want is to add a folder called C:\Users\Me\Documents\Programs to my path and just drop shortcuts to various programs into that folder and have them function the same as adding them to my path. So I dropped a link to notepad++.exe named "np" in my folder, and what I got was this: I have to run it with start np (instead of just np) But more importantly, if I try start np open_me.txt, it opens notepad++.exe but looks for open_me.txt in notepad++'s directory. How can I do this properly? (Also, I'd like to be opening notepad++.exe with the shortened name of np)

    Read the article

  • One user always unsuccessfull in logging into the MFP via DSS

    - by jherlitz
    We use HP M4345 MFP's here with the HP DSS software. All the users can log into the MFP except for one particular user. I haven't been able to find out why. We are leaning towards her active directory account might be goofed. However I hate to delete the account and recreate it as it will cause a lot of extra work. Looking for any advice before we have to proceed down that road.

    Read the article

  • IAM / AWS Access control via Windows Azure Active Directory

    - by Haroon
    I am trying to figure out how to configure IAM in Amazon AWS to use Windows Azure Active Directory. I found http://blogs.aws.amazon.com/security/post/Tx71TWXXJ3UI14/Enabling-Federation-to-AWS-using-Windows-Active-Directory-ADFS-and-SAML-2-0, however it is about configuring ADFS. WAAD supports SAML 2.0 http://azure.microsoft.com/en-us/documentation/articles/fundamentals-identity/ Has anyone figured it out yet?

    Read the article

  • Can't add HKCU entries via GroupPolicy Preferences

    - by Lou H
    2008 R2, XP and W7 64 bit workstations. Trying to add/modify two registry entries for Lync2010 for each user. Created using GP Management, User Configuration, Preferences, Registry. If the two registry entries already exist, then the policy works correctly. If they don't exist, nothing changes. GPReults reports it was successful. If I import the .reg file manually, it also works, so I don't believe it is a rights issue. I have tried the Update, Create, and Replace as the Action. I am not familiar with ADM templates, is that the only way to do it?

    Read the article

  • How to choose which fields are available via LDAP from an Active Directory

    - by Felix Eve
    I'm using PHP to do an ldap search and then pull the attributes out using ldap_get_attributes. This returns an array of data (that can be seen here) however there are some fields that are missing such as Organization Title, department, company, address and telephone number. How to I make these fields available? There is a similar question here: http://www.petri.co.il/forums/showthread.php?t=15227 I've followed the steps outlined there an tried changing some access permissions but am not really sure what I'm doing and can't see any permissions that directly relate to the fields that I can see when I edit a user in the "Active Directory Users Computers" window. I am a PHP developer, not a Windows server administrator so am finding configuring an AD rather challenging so please don't assume any level of knowledge about AD. I've asked the same question on stack exchange but understand this is a more relevant place to ask.

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • automating sql express backup via VSS backup

    - by Ornus
    I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

    Read the article

  • ksh93 as default shell via ssh

    - by jessem
    Howdy, I'm a big fan of ksh93. My hosts' shell account does not allow me to configure .login .profile or chsh to change my default shell. As it is, I am dropped into jailshell-3.2 and I have to invoke /bin/ksh93 manually. Is there some work around for this? Thanks in advance.

    Read the article

  • =?UTF-8?B??= in Emails sent via php mail problem

    - by Camran
    I have a website, and in the "Contact" section I have a form which users may fill in to contact me. The form is a simple form which action is a php page. The php code: $to = "[email protected]"; $name=$_POST['name']; // sender name $email=$_POST['email']; // sender email $tel= $_POST['tel']; // sender tel $subject=$_POST['subject']; // subject CHOSEN FROM DROPLIST, ALL TESTED $text=$_POST['text']; // Message from sender $text.="\n\nTel:".$tel; // Added to message to show me the telephone nr to the sender at bottom of message $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); Could somebody please tell me why this works most of the time, but sometimes I receive email whith no text and the subject line showing =?UTF-8?B??= I use outlook express, and I have read this http://stackoverflow.com/questions/454833/system-net-mail-and-utf-8bxxxxx-headers but it didn't help. The problem is not in Outlook, because when I log in to the actual mailprogram where I fetch the POP3 emails from, the email looks the same. When I right click in Outlook and chose "message source" then there is no "From" information. Ex, a good message should look like this: Subject: =?UTF-8?B?w5Z2cmlndA==?= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: John Doe However, the ones with problem looks like this: Subject: =?UTF-8?B??= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: As if the information has been lost somewhere. You should know also that I have a VPS, which I manage myself. I use postfix as an emailserver, if thats got anything to do with it. But then again, why does it work sometimes? Also another thing that I have noticed is that sometimes special characters are not shown correctly (by both Outlook and the webmail). For instance, the name "Björkman" in swedish is shown like Björkman, but again, only sometimes. I hope anybody knows something about this problem, because it is very hard to track down for me atleast. If you need more input let me know.

    Read the article

  • Access node.js local server though mobile via same shared wifi

    - by laggingreflex
    EDIT: I was stuck in this situation before but then it was Apache-related But this time I'm using NodeJS, so the old answer doesn't help. I'm running apache a NodeJS webserver (on port 80) on Windows 7. I want to access the webserver through my mobile which shares the wifi router with my pc locally. http://localhost works from PC. But I can't access http://192.168.1.4 from either my phone or even my computer. ipconfig /all on my computer lists my ip address as 192.168.1.4 Wireless LAN adapter Wireless Network Connection: IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred) I can ping my phone's (internal) ip address [192.168.1.5] from PC and vice-versa, I can ping my PC [192.168.1.4] from my phone. So why can't I access http://192.168.1.4 from my phone? (or PC) Firewall is off.

    Read the article

  • Denying access to website via htaccess based on http header

    - by neekster
    I've been trying for ages to get this to work and I can't put my finger on it. What I'm trying to do is block access to a site from a number of countries, based on the CF-IPCountry header added by CloudFlare. I figured htaccess was a suitable way to do this. We are running LiteSpeed 4.2.4 on top of DirectAdmin for a control panel. The problem we having is the htaccess rule doesn't seem to do anything. Here's the rule we tried: SetEnvIf CF-IPCountry AU UnwantedCountry=1 Order allow,deny Deny from env=UnwantedCountry Allow from all That makes no difference at all, connections are still accepted. Just to check that the rule was at least being processed, I changed Allow from all to Deny from all, and connections were refused. So it appears to be a problem wit the variable. Here's the relevant headers that come in with the request. Connection: Keep-Alive Accept-Encoding: gzip CF-Connecting-IP: xx.xx.xx.xx CF-IPCountry: AU X-Forwarded-For: xx.xx.xx.xx.xx CF-RAY: c9062956e2d04b6 X-Forwarded-Proto: http CF-Visitor: {"scheme":"http"} Zone-Name: xx.com.au Hopefully someone can help me out, this has been driving me nuts for too long. Thanks

    Read the article

  • Implementing an isolated guest WLAN via IPSec VPN on Windows

    - by sysadmin1138
    We are attempting to set up a guest WLAN network that is isolated from the rest of our network. This is proving difficult due to a couple of technical reasons. My first choice was to use a separate VLAN, on which our Firewall's handy WLAN port would handle DHCP, DNS and the network isolation we need. Unfortunately, due to the fact that our main office and our Internet connection itself are in different locations connected by way of a Metro Ethernet connection, I'm at the mercy of our ISP for VLAN transit. They won't pass a second VLAN between our two sites. And my hardware doesn't support 802.1ad "Q-in-Q", which would also solve this problem. So I can't use the VLAN method for isolation. At least not without spending money. As our Firewall can handle IPSec site-to-site VPN connections, I hope it is possible to connect a Server 2008R2 (standard) server I have in the office location to the WLAN and provide gateway services to the firewall. Thusly: Unfortunately, I don't know if it is possible to connect the two this way. The firewall has a pretty flexible IPSec/L2TP implementation (I've used it to connect iPads in the wild), but is neither Kerberized or supports NTLM. The Connection Security Rules view on the Windows server seems to get close to what I think needs to be done, but I'm failing on figuring out how to get it to do what I need it to do. Is this even possible, or do I need to pursue alternate solution?

    Read the article

  • Unable to connect via NetBIOS Name

    - by grom
    I can't connect to machines/shares by NetBIOS names. Below is console output showing the problem. C:\>nbtstat -n Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Local Name Table Name Type Status --------------------------------------------- BEAST <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BEAST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <1D> UNIQUE Registered ..__MSBROWSE__.<01> GROUP Registered C:\>nbtstat -A 192.168.1.3 Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- BRCLAPTOP <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BRCLAPTOP <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered MAC Address = 00-1C-BF-14-B8-6E C:\>ping beast Pinging beast [fe80::59b8:179f:b90b:a63f%11] with 32 bytes of data: Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Ping statistics for fe80::59b8:179f:b90b:a63f%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping brclaptop Ping request could not find host brclaptop. Please check the name and try again. C:\>nbtstat -a brclaptop Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] Host not found.

    Read the article

  • How to store etckeeper repositories on a central server via git

    - by andreash
    Hello, I would like to have one central git repository for all my servers' etckeeper .git repos. Here the suggestion was to use a file in /etc/etckeeper/commit.d, which basically looks like this, assuming that a git repo had been set up in somedir on somehost: #!/bin/sh cd /etc git push faruser@farhost:somedir The problem with this is, that it would be really nice to have all servers in the same repo on the central server. I tried git push faruser@farhost:somedir/server1 but that failed. As you can see, I've never worked with git before ... Any ideas on how this can be accomplished is greatly appreciated :) Cheers, Andreas

    Read the article

  • Sending Email via Outlook with address containing 2 apostrophes

    - by Luke Duddridge
    Hello All, I am struggling to find anything on the interweb, We have a client and the email address we have been given for one of their employees contains 2 apostrophes. One of our team is struggling to send an email to said employee. The client says the email is valid, but the postmaster reply tells me otherwise. could not be delivered. The problem appears to be : -- Recipient email address is possibly incorrect Additional information follows : -- 550 5.1.1 <xx.xx'xxx'[email protected]>... User Unknown Could anyone shed any light; is this a problem with the user being unknown or is the 2 apostrophes causing an issue. EDIT: Is there any way to encode an apostrophe? Cheers

    Read the article

  • How to remotely install Linux via SSH?

    - by netvope
    I need to remotely install Ubuntu Server 10.04 (x86) on a server currently running RHEL 3.4 (x86). I'll have to be very careful because no one can press the restart button for me if anything goes wrong. Have you ever remotely installed Linux? Which way would you recommend? Any advice for things to watch out? Update: Thanks for your help. I managed to "change the tires while driving"! The main components of my method are drawn from HOWTO - Install Debian Onto a Remote Linux System, grub legacy: Booting once-only, grub single boot and kernel panic reboot , and Ubuntu Community Documentation: InstallationFromKnoppix Here is the outline of what I did: Run debootstrap on an existing Ubuntu server Transfer the files to the swap partition of the RHEL 3.4 server Boot into tha swap partition (the debootstrap system) Transfer the files to the original root partition Boot into the new Ubuntu system and finish up the installation with tasksel, apt-get, etc I tested the method in a VM and then applied to the server. I was lucky enough that everything went smoothly :)

    Read the article

  • Launch apps or run commands on Windows via shortcuts

    - by Francisc
    Is it possible to register shortcuts on Windows 7 so that regardless where you are looking (Desktop, a folder etc) the shortcut gets "heard" and the appropriate action is performed. For example, creating a shortcut in the System32 folder which will work if you use Run with the shortcut's name, will not work if you set a key combination when focus is set on the Desktop for example. Is there a native way of registering top-level shortcuts or even an application for enabling this? Example of things I want keyboard shortcuts for: open a specific folder like %path% create a new .js file in the current folder launch an application eventually with its path set to the current location if the app supports this (e.g. command prompt) Thank you.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >