Search Results

Search found 64683 results on 2588 pages for 'work habits'.

Page 65/2588 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• VLAN Through Switch Doesn't Work

  - by vcsjones

  I have the following scenario: I have a Cisco Aironet 1040 access point. I have it configured with two SSIDs, each going to a different VLAN. So: SSID internal : VLAN 90 SSID guest : VLAN 70 On the router side, I have a Cisco RV220W (with the radios now turned off) and have setup VLANs with like VLAN IDs. VLAN 90 : 192.168.90.0/24 VLAN 70 : 192.168.70.0/24 As far as DHCP is concerned, each VLAN has a "DHCP Server" in the router's configuration: So with the access point connected directly to the router, everything works great. I connect to the internal network, and I get a 192.168.90.x address, and the guest network gets a 70.xxx address. Next I introduced a Cisco SG200-50 PoE switch between the router and the access point. The port is configured as a trunk port, so the VLAN tags should go right through the switch back to the router. However, when something is connected to the access point, nothing works. It isn't able to get an IP address, and manually assigning one doesn't seem to let any traffic route. Given that the access point works correctly when connected to the router directly, I believe the switch is misconfigured. What am I missing here? What can I use to better diagnose what the problem might be? It's small business equipment, so CLI access is not available. Below are screenshots of the switch's config. The access point is connected to GE2.

  Read the article

• How does the data storage work? [closed]

  - by Andres Adhi

  I am really new to the whole concept of Data storage, Domain, Server and everything else related to this. Can someone pleases explain what a Domain is? How are server part of the Domain and How are Database stored in the Server or Domain? How does a new server be able to connect to existing database server to get all the data needed. I tried to find this information in the web but I am not really finding a good resource. It may be because these is really basic information. I will really appreciate if someone can explain these concept in plain terms. Thanks in advance.

  Read the article

• Do 10m external SAS cables work?

  - by Joachim Sauer

  According to the Wikipedia page external SAS cables are specified for up to 10m length. However, I found it pretty hard to actually find places that sell cables of that length. This made me wonder: Are there any known problems with using cables that are as long as this? Will it be more fragile? Slower? And if 10m is not suggested, would 6m be any more stable? A little background: for several reasons we'd like to put a tape library physically separate from our main server and 10m would be enough to put it on a separate floor.

  Read the article

• Work around for yahoo mail slowness (using 100% cpu)

  - by Tony Lee

  My yahoo mail is very slow sometimes. When it is, I notice that IE8 is using 100% cpu. Using sysinternals process explorer I discovered the thread using all the cpu in IE8 has Flash in the stackwalk. I upgraded flash from 9 to 10, but the problem persists. I'm about to edit hosts to block the flash content by redirecting the yahoo and ad click dns entries. Is there some easier way to get flash to behave? The fix for the long run will be switching to gmail.

  Read the article

• How can make firefox do this work?

  - by gylns

  I'm using Vimperator with firefox, and I find i always type the same URL, for example I type " http://gigapedia.info/1/@title C++ " to search a ebook with "C++" include in title, How can i just type "C++" and can get the complete URL?

  Read the article

• why altgr+p doesn't work, AUTOHOTKEY

  - by voodoomsr

  Hi guys, i try and i try to find the bug in this script but i can't . Maybe some of you can give me a hint... Problem. When i press altgr&p it suppose that the Delete key is triggered, but the weird thing is that after one succesfull delete, if i continue pressing altgr&p appears the p, and the delete isn't triggered anymore. in the meantime i test other solution move to the right and then delete with the backspace, that works, but when i have text selected this alternative isn't good.... here is the code #InstallKeybdHook ;characters very used RAlt & e:: SendInput []{Left} Return RAlt & w:: SendInput <>{Left} Return RAlt & d:: SendInput (){Left} Return RAlt & s:: SendRaw {} SendInput {Left} Return RAlt & x:: SendInput ""{Left} Return RAlt & c:: SendInput ''{Left} Return RAlt & f:: SendInput * Return RAlt & r:: SendRaw + Return RAlt & v:: SendInput - Return ;comienzo y fin de linea RAlt & a:: SendInput {Home} Return RAlt & z:: SendInput {End} Return ;movimientos InEditon /* RAlt & p:: SendInput {Right}{BackSpace} Return */ <^>!p:: Send {Del} Return RAlt & o:: SendInput {Up} Return RAlt & l:: SendInput {Down} Return RAlt & k:: SendInput {Left} Return RAlt & ñ:: SendInput {Right} Return RAlt & ,:: SendInput {Enter} Return RAlt & i:: SendInput {BackSpace} Return ;; clipx ^mbutton:: sendinput ^+{insert} Return ^+k::^+Left +k::+Left ^k::Left +l::+Down ^+l::^+Down ^l::^Down +ñ::+Right ^+ñ::^+Right ^ñ::^Right +o::+Up ^+o::^+Up ^o::^Up +a::+Home ^+a::^+Home +z::+End ^+z::^+End

  Read the article

• How does USB device recognition work?

  - by GorillaSandwich

  I'm curious how USB device recognition works in Windows. I imagine it's something like this: When you plug in a device, it tells Windows "here's my device ID to tell you what I am" Windows looks to see if any drivers have been installed that match that device ID. The driver probably tells Windows what the device should be called - like "BlackBerry Curve" or "Canon Printer" If so, it somehow associates that device with that driver Otherwise, it looks for a matching driver online (if you let it) Am I right? If so, that still leaves some questions. When you install drivers, where do they go? Are they files in a folder, or do they get added to the registry? What is Windows doing when it first recognizes the device, thinks, and finally says "your new device is installed and ready to use?" Where does Windows look for missing drivers? Is it in their own database? Do device manufacturers submit drivers to Microsoft for inclusion there? Can anybody explain how this process really works? Also, do other OSes do this differently?

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• hudson/jenkins: help needed to get started with customization work

  - by user64204

  I'm would to customize jenkins by adding links to the left hand side panel and use the pages associated with these links to serve some custom content in place of the jobs/views table displayed by default. I managed to add links to the side-bar using the sidebar-links plugin. Now I'm trying to see how to replace the content of the <td id="main-panel"> element with some custom content. The custom content is generated by some PHP scripts which ideally should be called by hudson every time the custom pages are requested, though if too complicated I can either create static content to be served by jenkins by calling my PHP scripts in a crontab or see if calls to the PHP scripts can be done by apache itself before the page requests are sent to jenkins. I'm not sure writing a plugin is the best way to proceed and I would like to have your thoughts as to how you think I should implement this.

  Read the article

• configuration of zend frame work in ubuntu

  - by Rahul Mehta

  Hi, I have created a project zfapi by zf command in ubuntu. Now http://myserverpath.com/zfapi/ gives me listing of folder public application and others. http://myserverpath.com/zfapi/public give me the index page index.php. and i have made the UserController.php in application/controllers but by http://myserverpath.com/zfapi/user/ is saying user not found. what configuration i need to set for running it proper. I had set my /etc/apache2/apache2.conf added the following in the last . <VirtualHost *:80> DocumentRoot "/var/www/mypath/zfapi" <Directory "/var/www/mypath/zfapi"> Order allow,deny Allow from all AllowOverride all </Directory> </VirtualHost> is giving me this error while restarting server. [Sat Jan 08 13:32:53 2011] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sat Jan 08 13:33:03 2011] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results what this i should do .?

  Read the article

• SQL2008 Won't Work After SP1 Install?

  - by leen3o

  I have SQL2008 installed on my Win2008 server, and its been working fine - I have sites running using SQL databases etc.. I thought I would install SQL2008 SP1, but after install I cannot connect to SQL via Management Studio, and in configuration manager I cannot start SQL? TITLE: Connect to Server Cannot connect to #MYINSTANCENAME#. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 BUTTONS: OK I'm not really a techie so a bit stuck?? any ideas??

  Read the article

• Running an executable from PowerShell does not work with spaces in the path

  - by John Hartley

  From the PowerShell prompt: \Windows\system32\mspaint.exe will run Paint. So will Invoke-Expression -command "\Windows\system32\mspaint.exe" but if there is a space in the path PowerShell spits the dummy e.g. Invoke-Expression -command "\install\sub directory\test.bat" Which complains: The term '\install\sub' is not recognized as the name of a cmdlet, function, script file, or operable program. What am I missing?

  Read the article

• Wiki on a pendrive - should work with any OS

  - by Florian Pilz

  Hello, I want to have an "extended memory" and want to accomplish that with an wiki on an pendrive. I already decided to use PmWiki, but if another wiki solves my problem that would be fine. The issue is: If I install an Apache on an pendrive, it depends on the running operating system. Because I'm using Windows & Linux (and will use Mac in the future) it is crucial for me to be platform independent. I read this article. DokuWiki is for Windows only and MoinMoin needs Python installed (which would be possible on my PCs, but not on public ones). Every help for my "extended memory" is appreciated. PS: As a last resort I could host a wiki on my webpage, which would be accessible everywhere. But I just see a challenge in trying it on a pendrive.

  Read the article

• why udp client work when wirshark capture?

  - by herzl shemuelian

  I have two machine A,B windows 7 os .I connect them end to end and try run a performance test by using tcpreplay. step 1) I check conectivity between to point by netcat In A i run nc -lvup 5432 when I run on B nc -u 1.2.3.4 5432 I can send data from B to A step 2) when in I run tcpreplay in B tcpreplay -i %0 myudp.pcap in A I don't recevice any data . when I open wireshark in A then my nc can read data why? I check dst mac and dst ip in pcap file they are correct. is importan udp src mac or src ip for udp how that I open udp server ?

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• Can't get PDO MySQL driver to work on PHP

  - by bart

  Trying to install Vanilla 2 locally using MAMP i got the error: "You must have the MySQL driver for PDO enabled in order for Vanilla to connect to your database". When I check phpinfo() I see: --with-pdo-mysql=shared,/Applications/MAMP/Library --with-pdo-pgsql=shared,/Applications/MAMP/Library/pg When I go and check out those paths I find the files: libpq.5.dylib libpq.dylib libpq.5.2.dylib When I check my php.ini file I see: ; Extensions extension=pdo_mysql.so In php.ini the path to the extension dir is correct (checked it manually): extension_dir = "/Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/" In this folder I find the file: pdo_mysql.so phpinfo() gives me two sections: PDO PDO drivers: sqlite, sqlite2 and pdo_sqlite SQLite Library: 3.6.22 So everything seems to be fine, but can't get the PDO MySQL driver working :(

  Read the article

• How do I make netdiag work?

  - by Mohamed Abobakr

  I'm trying to run the netdiag command to troubleshoot the internet connection but when I run it in cmd I get the following message: 'netdiag' is not recognized as an internal or external command, operable program or batch file. Also, I have tried typing "net diag", which gives me a syntax error, but that NET command seems to be something completely different. Searching on google for answers gives me results that deal with Windows Server 2003; I'm on a Windows XP machine.

  Read the article

• Why does this work?

  - by Fizz

  Why does this work? I'm not complaining, just want to know. void Test() { int a = 1; int b = 2; What<int>(a, b); // Why does this next line work? What(a, b); } void What<T>(T a, T b) { }

  Read the article

• Website doesn't work when missing "www"

  - by jeff

  Hello everyone, Does anyone know the solution to this problem? I checked my zone file and there are 2 A records mydomainname.com. 14400 IN A ip.address.x.x localhost 14400 IN A 127.0.0.1 I'm On CentOs 5.2, by the way. Thanks for the help!!

  Read the article

• Specifying a source in puppet doesn't seem to work

  - by Mr Wilde

  I have been attempting to create a manifest for installing postgres 9.1 using puppet on a Centos 5 server. I have been trying to adapt the instructions at http://wiki.postgresql.org/wiki/YUM_Installation in order to achieve this and when I go through a manual process, I have been able to. It would seem to me therefore that a puppet manifest containing package { 'postgresql91-server': ensure => installed, source => 'http://yum.postgresql.org/9.1/redhat/rhel-5-x86_64/pgdg-centos91-9.1-4.noarch.rpm' } however on attempting to apply this manifest I get err: /Stage[main]//Package[postgresql91-server]/ensure: change from absent to present failed: Could not find package postgresql91-server Any expert puppeteers out there able to help me?

  Read the article

• Can't get PDO MySQL driver to work on PHP

  - by bart

  Trying to install Vanilla 2 locally using MAMP i got the error: "You must have the MySQL driver for PDO enabled in order for Vanilla to connect to your database". When I check phpinfo() I see: --with-pdo-mysql=shared,/Applications/MAMP/Library --with-pdo-pgsql=shared,/Applications/MAMP/Library/pg When I go and check out those paths I find the files: libpq.5.dylib libpq.dylib libpq.5.2.dylib When I check my php.ini file I see: ; Extensions extension=pdo_mysql.so In php.ini the path to the extension dir is correct (checked it manually): extension_dir = "/Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/" In this folder I find the file: pdo_mysql.so phpinfo() gives me two sections: PDO PDO drivers: sqlite, sqlite2 and pdo_sqlite SQLite Library: 3.6.22 So everything seems to be fine, but can't get the PDO MySQL driver working :(

  Read the article

• Writing scripts that work with my emails

  - by queueoverflow

  I currently use Thunderbird as my email client and it has some filters, but that seems to be all I can program in it. On several occasions, I heard people talk about their automated email workflow. One example: When I do not get a reply to an email the script will send a “nag” email asking why I did not get a response yet. Or another one: I get so much mail that I cannot read them all. After a week, unread email is put on hold and the sender gets a “if it was important, reply to this email and it will be set to un-hold” email. The script then takes the answer and move it to back into the important folder. I read about FiltaQuilla which seems nice, but it does not seem to be the kind of programming that I am looking for. How can I write general purpose scripts like those? Do I need to write my own Python IMAP/SMTP client (if that is even possible) to to this or can I script it it, say JavaScript, in Thunderbird?

  Read the article

• Looking for app to work fluidly with CSV data in graph form

  - by Aszurom

  It often occurs to me that if I had a good tool for viewing CSV data in graphical format, and comparing two sets of numbers to each other, I could do a great deal of meaningful trend watching and data interpretation. For example, perfmon can output quite a lot of data about a server into a CSV file, but there's no good way to view it. A lot of scripts could/have been written that would populate CSV files. I could write these all day long. My problem is that I need a great viewer. I've seen quite a few things that will take a CSV file and after a lot of tweaking and user adjustment produce a static gif/png image. A static image doesn't do me a lot of good, because I have to look at it, then re-calibrate the parameters of the program, regenerate the image, repeat. That sucks. I could do this in Excel. Ideally, I would want a FLUID graph viewer. On the fly, I can adjust how much of my timeline I'm viewing. I could adjust the scaling so that one big spike doesn't make 99.9% of the data an unreadable line across the bottom of the X axis. Stuff like that. I should be able to say "show me CSV column 3 and column 5 as graphs. Show me the data scaled for 20 or 150 entries, and let me slide that window up and down the column of data. Auto scale to fit 95% of data within the Y axis and let crazy spikes go off the screen." Maybe I'm terribly spoiled by how you can drag, zoom, and slide data around on my iPad. I want to be able to view a spreadsheet of data with that fluidity and not have to guess at what sort of static snapshot I want to create from it. I don't want to have to make a study of how to tweak some data plotting program to let me import my file and do what I could just do in Excel. I want to scale, zoom, and transform my graph on the fly and then export a snapshot of it once I have it the way I want it. Is there anything out there that fills this need? I'll take linux, osx, win32 or even iOS suggestions.

  Read the article

• How does Tunlr work?

  - by gravyface

  For those of you not in the US, Tunlr uses DNS witchcraft to allow you to access US-only (and UK-only stuff like BBC radio online) services and Websites like Hulu.com, etc. without using traditional methods like a VPN or Web proxy. From their FAQ: Tunlr does not provide a virtual private network (VPN). Tunlr is a DNS (domain name system) unblocking service. We’re using sophisticated technologies (a.k.a. the Tunlr Secret Sauce ©) to re-adress certain data envelopes, tricking the receiver into thinking the envelope originated from within the U.S. For these data envelopes, Tunlr is transparently creating a network tunnel from your location to our U.S.-based servers. Any data that’s not directly related to the video or music content providers which Tunlr supports is not only left untouched, it’s also not even routed through Tunlr. In order to use Tunlr, you will have to change the DNS address. See Get started for more information. I can't really wrap my head around how this works; I have always assumed that these services performed a geolocation lookup via your client IP. Just really curious as to how this works. EDIT 2 I believe they're only proxying the initial geo check and then modifying the data stream request to include your real IP address so that the streaming is direct, not proxied.

  Read the article

• Configure IIS site to work with host header & hosts file entry

  - by HarveySaayman

  I'm I bit of an IIS / Web noob (I'm a C# backend service / winforms dev) so please bare with me :-) I've set up a site in IIS on my local dev machine. In the bindings section of the site ive added 4 bindings, all 4 for http: Host Name Port IP Address blog.sourcecube.co.za 26581 * www.blog.sourcecube.co.za 26581 * blog.sourcecube.co.za 26581 127.0.0.1 www.blog.sourcecube.co.za 26581 127.0.0.1 in my hosts file (drivers\etc\hosts), i've added the folling entries: 127.0.0.1 blog.sourcecube.co.za 127.0.0.1 www.blog.sourcecube.co.za when i ping my domain name from the command line it does in fact resolve to the loopback address, 127.0.0.1. So what I'm expecting to happen when i navigate to blog.sourcecube.co.za in my browser is for it to resolve to 127.0.0.1, and when the request hits IIS, it should know which site to serve because of the host header? But when i navigate to blog.sourcecube.co.za, i get an "Unable to connect, Firefox can't establish a connection to the server at blog.sourcecube.co.za" error. What am I doing wrong? --- UPDATE --- Navigating to blog.sourcecube.co.za:26581 from my browser works... I'd like get it working without specifying the port number though.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >