Search Results

Search found 21678 results on 868 pages for 'network traffic'.

Page 650/868 | < Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >

• Routing a PPTP client and VMware Server instance running on the same box

  - by servermanfail

  I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

  Read the article

• Windows scheduled task not running

  - by Ravi Kumar Singh

  I have several SQL server backups on a server. I have created a batch file which then copies these to network drives. These are mapped to the server, and it works properly. Now, I've created a scheduled task to do this. If I select "run the task when logged in", I can test the task. It works fine. However I cannot test it with the other option "run task if logged in or not". I've read that testing this task is not possible manually. However the task runs when we log off the server automatically.

  Read the article

• My wifi internet router connection resets when more devices connected

  - by joeeoj

  The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

  Read the article

• Handling early/late/dropped packets for interpolation in a 3D multiplayer game

  - by Ben Cracknell

  I'm working on a multiplayer game that for the purposes of this question, is most similar to Team Fortress. Each network data packet will contain the 3D position of the target moving object. (this object could be another player) The packets are sent on a fixed interval, and linear interpolation will be used to smooth the transition between packets. Under normal circumstances, interpolation will occur between the second-to-last packet, and the last packet received. The linear interpolation algorithm is the same as this post: Interpolating positions in a multiplayer game I have the same issue as in that post, but the answers don't seem like they will work in my situation. Consider the following scenario: Normal packet timing, everything is okay The next expected packet is late. That's okay, we'll just extrapolate based on previous positions The late packet eventually arrives with corrections to our extrapolation. Now what do we do with its information? The answers on the above post suggest we should just interpolate to this new packet's position, but that would not work at all. If we have already extrapolated past that point in time, moving back would cause rubber-banding. The issue is similar in the case of an early or dropped packet. So I believe what I am looking for is some way to smoothly deal with new information in an ongoing interpolation/extrapolation process. Since I might be moving on to quadratic or even cubic interpolation, it would be great if the same solutiuon could be applied to those as well.

  Read the article

• Presario r3000 hangs on boot to Ubuntu 12.04

  - by Chris

  I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

  Read the article

• unable to access shared drives n win7

  - by colin

  OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

  Read the article

• Internet Connectivity Issue

  - by MastaChief11

  Lately, I have been having issues connecting to the internet on one of my computers. The computer I am using now, however, is on the same network as the computer I am posting from. The issues seemed to randomly start about 2 days ago, and the only thing that seemed to fix the issue was to connect to Hotspot Shield VPN. I do not get any yellow warning signs by the Wi-Fi icon in the taskbar. I am sometimes able to use Google search, but I can never go to a website. I am also not able to re-install Hotspot Shield or update Flash because they have to connect to their company's servers. I have tried other VPN services just to see if it would fix anything, but as I expected, nothing changed. I am unsure of how I can fix the issue, and I appreciate all help given. I am running Windows 7 64 Bit Pro on a custom-built computer. Thanks.

  Read the article

• Netcat I/O enhancements

  - by user13277689

  When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

  Read the article

• how to run apache2 or nginx + php on iPhone? [closed]

  - by Rubytastic

  Is there a way to run Apache2 or Nginx with PHP on the iPhone? Im surprised so little info is available on this topic, as it seems quite interesting to host websites on an iPhone. Consider slow 3G connections or no 3G at all, and you want to demonstrate some webapplication you wrote... hosting them on the iphone would be an awsome way to fix the speed issues with the mobile network speeds. For the Ipad there are several addoptions available, nothing much usable on iphone / nginx apache2 search terms anywhere :( I want to host some websites on my iphone for demonstration purposes. So when im "out the office" Ill be able to very fast browse some websites that I host on the Iphone. there is no decent information out there, does anyone have a lead on how to do this? My question is specific to if nginx or apache2 can be run on the iphone, it would be nice if PHP would run on it too

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• need for tcp fine-tuning on heavily used proxy server

  - by Vijay Gharge

  Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

  Read the article

• Extremely slow internet-connection?

  - by Martti Laine

  Hello Few days ago I opened my computer as I always do after school, and got pretty amazed about my 1.27kb/s download-speed. It has continued for few days already. We have a wireless network, which is used by 3 computers. Normally I've gotten 200kb/s (I think we have a 2mb-connection) but now it just suddenly slowed down. My friends have the same service-provider, but no problem. So, is there any kind of program, which would show me all the programs using connection and how much. It must be a program open which just takes all speed off. Any help is appreciated, Martti Laine

  Read the article

• Login Fail - Google Music Manager

  - by TX-NY-CA

  This is on a Surface Pro. I have not installed a virtual machine. Here is Google's feedback on the error message I receive when attempting login: "Login failed. Could not identify your computer" error message If you're receiving a 'Login failed. Could not identify your computer.' error, we couldn’t identify your machine. Please note that at this time, virtual machines aren't supported by Google Play. If you're certain that you don't have a virtual machine, some users have reported that they were able to workaround the issue by disabling their network bridge." My ifconfig feedback, in case that's helpful: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6640 (6.6 KB) TX bytes:6640 (6.6 KB) mlan0 Link encap:Ethernet HWaddr 60:45:bd:f9:04:c0 inet addr:10.129.116.166 Bcast:10.129.116.255 Mask:255.255.255.128 inet6 addr: fe80::6245:bdff:fef9:4c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:96714 errors:0 dropped:0 overruns:0 frame:0 TX packets:73079 errors:13 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:117500998 (117.5 MB) TX bytes:9008106 (9.0 MB)

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• Session management error: None of the authentication protocols specified are supported

  - by JBWhitmore

  The title is the first error that has sent me on a mission to fix things. Motivation: I was trying to install the new Enthought Python Distribution -- when the error above first showed up. The install finished -- and looked like there were a few more times it flagged dcopserver problems: Please check that "dcopserver" program is running! Could not read network connection list: ~/home/user/.DCOPserver_host__0 When running ipython from the distribution, it claims that readline (the ability to up arrow in history or tab-complete) is not available for my system. It is though -- if I run the ipython that's sitting in /usr/bin/ipython all readline features work perfectly. So, I tried to fix the install by trying to fix what I thought could be causing the problems. Bad things that are happening that I want to be fixed: When restarting I get the error: Could not update ICEauthority file /home/username/.ICEauthority. ipython readline doesn't work with Enthought's ipython Things I have tried: changed the owner of my ~/.ICEauthority to be me. changed the owner of home directory (and all nested files and folders) to be me double checked that /var/lib/gdm was owned by Gnome (yep) attempted to reinstall DCOP, kbuildsycoca stuff (fail) I've removed nautilus; rebooted; reinstalled; rebooted; removed ubuntu-desktop; rebooted; reinstalled; rebooted. Any suggestions on how to fix the Bad Things that are happening would be greatly appreciated! Computer: Ubuntu 10.04 x86

  Read the article

• when to use squid on server side?

  - by ajsie

  so i have set up apache serving my php pages. i read about squid but don't understand why/how i should use it to speed up my web server. from what i've learned squid is located in same network (or another) and caches content requested by the web browsers, and then when another web browser wants a same page, squid returns that page cached locally, so it never sends a request to the apache server (faster response time for the client, and reduced load for the server). so it seems that squid is for the client side (web browser), and has nothing to do with the server side (apache). but then some people tell others how they have speeded up apache using squid. so im confused. could squid be used on the server side too? and how will it work?

  Read the article

• Unknown protocol when trying to connect to remote host with stunnel

  - by RaYell

  I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

  Read the article

• Group policy issues

  - by Alex Berry

  We are having an issue on one of our clients relatively new sbs installs. The domain consists of a single SBS 2011 server with 4 windows 7 clients and 3 xp clients. Most of the time everything is fine however roughly every 3 days windows 7 clients start timing out when trying to receive computer group policy. This results in hour long delays before getting to the login screen in the morning. This is accompanied by event ID 6006, win login errors stating it took 3599 seconds to process policy. Once they've booted they can log in without issue however gpupdate fails again on computer policy and gpresult comes back with access denied, even when run as domain admin... At this point if we restart the server the network is fine for 3 days. I thought perhaps it might be ipv6 or smb2, but disabling ipv6 on the clients doesn't help and the clients can browse the sysvol folder freely on smb2 anyway. Does anyone have any ideas or routes I can take to further diagnose the issue? Thanks in advance :)

  Read the article

• Creating svn repo programmatically from a webpage and sudo

  - by Adriano Varoli Piazza

  We want to automate the creation of the svn repos and trac environments for new projects. Basically, this would mean creating a web script that got some info (like env and repo name, etc) from the user and then executed sudo -u svn svnadmin create /var/svn/<projectname> trac-admin /var/trac/sites/<projectname> initenv [... All extra params...] For the second command, this is simple, as it already runs as the www-data user, so I wouldn't have to use sudo. But for the first command, I'd have to use sudo and add www-data to the sudoers file. I was wondering if this is a good idea, and how to do it in that case. Reading the manpage has left me with more doubts than certainties about this. This webserver would only be accessible from our internal network, by the way. The OS is Ubuntu Server 10.04.

  Read the article

• MaaS minimum requirements with juju-jitsu?

  - by Christopher Shen Mu Long

  I've browsed through so many different sites and found so much contradictory information. As I am getting tired of this and do belive this question affects many other users, so I would like to collect the "once and for all times" answer. Unfortunately, the documentation on MaaS and Juju is ... well, not the best, sorry to say that. What are the minimum system requirements for setting up a MaaS cluster, which is going to be orchestrated with juju-jitsu? Do they need to have the exact system specifications or can I just combine different hardware? What are the minimum requirements for the master machine? E.g. "You need at least 8GB of RAM, a dual core CPU with at least 3.0 GHz." How many machines to I need to deploy MaaS on? I've read six machines, nine machines, and so on. I clearly want to know: "You need one for the Master and e.g. five nodes." Do I need to attach as many NICs (network interface cards) to my master machine as there are nodes, or can I simply attach two NICs and a switch? One NIC for connecting to the internet, one for handling the MaaS tasks, connected to a switch, which connects my nodes to the master? Is Juju now ready for local deployment? The last time I experimented with juju and had to reboot my machine, the services orchestrated by juju were gone. This was an issue I also found on the official juju site. Unfortunately, as mentioned above, the documentation is not the best, so I could not find the necessary info on that again. So: Can I use juju on a local environment or will a reboot break my setup?

  Read the article

• Security in Robots and Automated Systems

  - by Roger Brinkley

  Alex Dropplinger posted a Freescale blog on Securing Robotics and Automated Systems where she asks the question,“How should we secure robotics and automated systems?”.My first thought on this was duh, make sure your robot is running Java. Java's built-in services for authentication, authorization, encryption/confidentiality, and the like can be leveraged and benefit robotic or autonomous implementations. Leveraging these built-in services and pluggable encryption models of Java makes adding security to an exist bot implementation much easier. But then I thought I should ask an expert on robotics so I fired the question off to Paul Perrone of Perrone Robotics. Paul's build automated vehicles and other forms of embedded devices like auto monitoring of commercial vehicles on highways.He says that most of the works that robots do now are autonomous so it isn't a problem in the short term. But long term projects like collision avoidance technology in automobiles are going to require it.Some of the work he's doing with his Java-based MAX, set of software building blocks containing a wide range of low level and higher level software modules that developers can use to build simple to complex robot and automation applications faster and cheaper, already provide some support for JAUS compliance and because their based on Java, access to standards based security APIs.But, as Paul explained to me, "the bottom line is…it depends on the criticality level of the bot, it's network connectivity, and whether or not a standards compliance is required."

  Read the article

• As a student looking for hands-on experience, how should I configure my test lab to accurately reflect a business setting?

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial, so I'm trying to get the hands on experience. I want to build a small test network that has both wireless and also wired clients, a printer, a laptop, a desktop, and server (I have 2x 1TB drives of data that I want to be available to all computers). What should I do to configure these in a way that will reflect how a small business might be set up, so that I can work towards some meaningful experience.

  Read the article

• Install VirtualBox Guest Additions "Feisty Fawn"

  - by codebone

  I am trying to install the virtualbox guest additions into a feisty fawn (7.04) VM. The problem I am running into is that when I Click install guest additions, or place the iso in the drive manually, the disk never shows up in the machine. I even manually mounted and went to the mounted directory and it was empty. When using the file browser, doubling clicking on the cdrom yields Unable to mount the selected volume. mount: special device /dev/hdc does not exist. Secondly, I tried installing via repository... but according to the system, I have no internet connection. But, I can browse the web using firefox just fine (in the guest). Here is my /etc/network/interfaces file... code auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp I also tryed setting a static ip... auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.253 netmask 255.255.255.0 gateway 192.168.1.1 The reason I am trying to get this particular installation running is because it is part of a book, "Hacking: The Art of Exploitation" (Jon Erickson), and is fully loaded wilh tools and such to go along exactly with the book. I appreciate any effort into finding a solution for this! Thanks

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• URL redirect to a virtual server on a VLAN

  - by zeroFiG

  I have a production site, running off 10 servers. I've been given another virtual server on the same network as these 10 servers, to use for testing purposes. This server doesn't have it's own DNS entry. Therefore I need to do a redirect to the site hosted on this virtual server for a sub-domain of the site running on the 10 other servers. So Basically I was wondering how I would configure a sub domain of my production server to point at the Virtual server for testing. I'm guessing I need to modify my site file in /etc/apache2/sites-available and add another virtual host like the following and modify the redirect match: <VirtualHost *> ServerName SUBDOMAIN.DOMAIN.com RedirectMatch 301 (.*) **IP ADDRESS** CustomLog /var/log/apache2/SUBDOMAIN.DOMAIN.com.access.log combined </VirtualHost> Do I set the redirect match to just the IP on the Virtual server, and then configure another site file in the sites-available directory, which will recption this redirect and point the browser towards the HTML root? Thanks, I hope I made myself clear.

  Read the article

< Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >